dmesg - NeuctichcianoyWritbi
microcode: microcode updated early to revision 0x24, date = 2016-04-29
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.0-514.2.2.el7.x86_64 (builder@kbuilder.dev.centos.org) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-11) (GCC) ) #1 SMP Tue Dec 6 23:06:41 UTC 2016
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000c7606fff] usable
BIOS-e820: [mem 0x00000000c7607000-0x00000000c7628fff] ACPI data
BIOS-e820: [mem 0x00000000c7629000-0x00000000c8cd8fff] usable
BIOS-e820: [mem 0x00000000c8cd9000-0x00000000c915bfff] reserved
BIOS-e820: [mem 0x00000000c915c000-0x00000000dadcafff] usable
BIOS-e820: [mem 0x00000000dadcb000-0x00000000dae8bfff] reserved
BIOS-e820: [mem 0x00000000dae8c000-0x00000000daea0fff] ACPI data
BIOS-e820: [mem 0x00000000daea1000-0x00000000db0a3fff] usable
BIOS-e820: [mem 0x00000000db0a4000-0x00000000db802fff] ACPI NVS
BIOS-e820: [mem 0x00000000db803000-0x00000000dbafefff] reserved
BIOS-e820: [mem 0x00000000dbaff000-0x00000000dbafffff] usable
BIOS-e820: [mem 0x00000000dd000000-0x00000000df7fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041e7fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: Dell Inc. Latitude E5550/0JPRM5, BIOS A05 01/05/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x41e800 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7C00000000 write-back
1 base 0400000000 mask 7FF0000000 write-back
2 base 0410000000 mask 7FF8000000 write-back
3 base 0418000000 mask 7FFC000000 write-back
4 base 041C000000 mask 7FFE000000 write-back
5 base 041E000000 mask 7FFF800000 write-back
6 base 00E0000000 mask 7FE0000000 uncachable
7 base 00DE000000 mask 7FFE000000 uncachable
8 base 00DD000000 mask 7FFF000000 uncachable
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 16GB, range: 256MB, type WB
reg 2, base: 16640MB, range: 128MB, type WB
reg 3, base: 16768MB, range: 64MB, type WB
reg 4, base: 16832MB, range: 32MB, type WB
reg 5, base: 16864MB, range: 8MB, type WB
reg 6, base: 3584MB, range: 512MB, type UC
reg 7, base: 3552MB, range: 32MB, type UC
reg 8, base: 3536MB, range: 16MB, type UC
total RAM covered: 16312M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16G num_reg: 9 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 3536MB, range: 16MB, type UC
reg 2, base: 3552MB, range: 32MB, type UC
reg 3, base: 3584MB, range: 512MB, type UC
reg 4, base: 16GB, range: 256MB, type WB
reg 5, base: 16640MB, range: 128MB, type WB
reg 6, base: 16768MB, range: 64MB, type WB
reg 7, base: 16832MB, range: 32MB, type WB
reg 8, base: 16864MB, range: 8MB, type WB
e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdbb00 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fda70-0x000fda7f] mapped at [ffff8800000fda70]
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
BRK [0x01f9e000, 0x01f9efff] PGTABLE
BRK [0x01f9f000, 0x01f9ffff] PGTABLE
BRK [0x01fa0000, 0x01fa0fff] PGTABLE
BRK [0x01fa1000, 0x01fa1fff] PGTABLE
BRK [0x01fa2000, 0x01fa2fff] PGTABLE
BRK [0x01fa3000, 0x01fa3fff] PGTABLE
RAMDISK: [mem 0x34338000-0x36193fff]
ACPI: RSDP 00000000000ef1b0 00024 (v02 DELL )
ACPI: XSDT 00000000c76070a8 000CC (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: FACP 00000000c761b5b0 0010C (v05 DELL CBX3 01072009 AMI 00010013)
ACPI: DSDT 00000000c7607200 143AA (v02 DELL CBX3 01072009 INTL 20120913)
ACPI: FACS 00000000db800f80 00040
ACPI: APIC 00000000c761b6c0 00084 (v03 DELL CBX3 01072009 AMI 00010013)
ACPI: FPDT 00000000c761b748 00044 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: FIDT 00000000c761b790 0009C (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: MCFG 00000000c761b830 0003C (v01 DELL CBX3 01072009 MSFT 00000097)
ACPI: HPET 00000000c761b870 00038 (v01 DELL CBX3 01072009 AMI. 00000005)
ACPI: SSDT 00000000c761b8a8 004B5 (v01 SataRe SataTabl 00001000 INTL 20120913)
ACPI: UEFI 00000000c761bd60 00042 (v01 00000000 00000000)
ACPI: SSDT 00000000c761bda8 00C7D (v02 Ther_R Ther_Rvp 00001000 INTL 20120913)
ACPI: ASF! 00000000c761ca28 000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: SSDT 00000000c761cac8 0051F (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
ACPI: SSDT 00000000c761cfe8 00B74 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
ACPI: SSDT 00000000c761db60 001C7 (v02 PmRef LakeTiny 00003000 INTL 20120913)
ACPI: SSDT 00000000c761dd28 003A5 (v02 CppcTa CppcTabl 00001000 INTL 20120913)
ACPI: PCCT 00000000c761e0d0 0006E (v05 PcctTa PcctTabl 00001000 INTL 20120913)
ACPI: SSDT 00000000c761e140 00AC4 (v02 Cpc_Ta Cpc_Tabl 00001000 INTL 20120913)
ACPI: SSDT 00000000c761ec08 041AC (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
ACPI: SSDT 00000000c7622db8 04508 (v01 DptfTa DptfTabl 00001000 INTL 20120913)
ACPI: SLIC 00000000c76272c0 00176 (v03 DELL CBX3 01072009 MSFT 00010013)
ACPI: MSDM 00000000c7627438 00055 (v03 DELL CBX3 06222004 AMI 00010013)
ACPI: DMAR 00000000c7627490 000B0 (v01 INTEL BDW 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041e7fffff]
Initmem setup node 0 [mem 0x00000000-0x41e7fffff]
NODE_DATA [mem 0x41e7d3000-0x41e7f9fff]
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x41e7fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xc7606fff]
node 0: [mem 0xc7629000-0xc8cd8fff]
node 0: [mem 0xc915c000-0xdadcafff]
node 0: [mem 0xdaea1000-0xdb0a3fff]
node 0: [mem 0xdbaff000-0xdbafffff]
node 0: [mem 0x100000000-0x41e7fffff]
On node 0 totalpages: 4166342
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 13933 pages used for memmap
DMA32 zone: 891690 pages, LIFO batch:31
Normal zone: 51104 pages used for memmap
Normal zone: 3270656 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xdd800000-0xdf7fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] res res lint[0x43])
ACPI: NMI not connected to LINT 1!
ACPI: LAPIC_NMI (acpi_id[0x02] low res lint[0x36])
ACPI: NMI not connected to LINT 1!
ACPI: LAPIC_NMI (acpi_id[0x03] dfl edge lint[0x2e])
ACPI: NMI not connected to LINT 1!
ACPI: LAPIC_NMI (acpi_id[0x04] dfl res lint[0xbc])
ACPI: NMI not connected to LINT 1!
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xc7607000-0xc7628fff]
PM: Registered nosave memory: [mem 0xc8cd9000-0xc915bfff]
PM: Registered nosave memory: [mem 0xdadcb000-0xdae8bfff]
PM: Registered nosave memory: [mem 0xdae8c000-0xdaea0fff]
PM: Registered nosave memory: [mem 0xdb0a4000-0xdb802fff]
PM: Registered nosave memory: [mem 0xdb803000-0xdbafefff]
PM: Registered nosave memory: [mem 0xdbb00000-0xdcffffff]
PM: Registered nosave memory: [mem 0xdd000000-0xdf7fffff]
PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:5120 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88041e400000 s96728 r8192 d30248 u524288
pcpu-alloc: s96728 r8192 d30248 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4101220
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
Memory: 5698212k/17276928k available (6764k kernel code, 611560k absent, 376352k reserved, 4432k data, 1680k init)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=4.
NR_IRQS:327936 nr_irqs:728 0
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2294.523 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.04 BogoMIPS (lpj=2294523)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 4096
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives: 28k freed
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 25812 entries in 101 pages
smpboot: Max logical packages: 2
smpboot: APIC(0) Converting physical 0 to logical package 0
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
DMAR: RMRR base: 0x000000db9ee000 end: 0x000000db9fcfff
DMAR: RMRR base: 0x000000dd000000 end: 0x000000df7fffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
IRQ remapping doesn't support X2APIC mode, disable x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz (fam: 06, model: 3d, stepping: 04)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 OK
Brought up 4 CPUs
smpboot: Total of 4 processors activated (18356.18 BogoMIPS)
node 0 initialised, 2647701 pages in 41ms
devtmpfs: initialized
EVM: security.selinux
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xdb0a4000-0xdb802fff] (7729152 bytes)
atomic64 test passed for x86-64 platform with CX8 and with SSE
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
dmi type 0xB1 record - unknown flag
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 17 blocks of module-level executable AML code
ACPI: SSDT 00000000dae00c18 003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: SSDT 00000000dae00618 005AA (v02 PmRef ApIst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 005AA (v02 PmRef ApIst 00003000 INTL 20120913)
ACPI: SSDT 00000000dae4fc18 00119 (v02 PmRef ApCst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v02 PmRef ApCst 00003000 INTL 20120913)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xdf800000-0xfeafffff window]
pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xf723c000-0xf723ffff 64bit]
pci 0000:00:04.0: [8086:1603] type 00 class 0x118000
pci 0000:00:04.0: reg 0x10: [mem 0xf7230000-0xf7237fff 64bit]
pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7220000-0xf722ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7246000-0xf724601f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf7200000-0xf721ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf7243000-0xf7243fff]
pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7238000-0xf723bfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:9c98] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7242000-0xf72423ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7241000-0xf72417ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7240000-0xf72400ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
pci 0000:01:00.0: [1217:8520] type 00 class 0x080501
pci 0000:01:00.0: reg 0x10: [mem 0xf7101000-0xf7101fff]
pci 0000:01:00.0: reg 0x14: [mem 0xf7100000-0xf71007ff]
pci 0000:01:00.0: PME# supported from D3hot D3cold
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff]
pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xf7000000-0xf7001fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff]
pci 0000:00:1c.4: PCI bridge to [bus 03]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 3 GPEs in block 00 to 7F
ACPI: EC: GPE = 0x27, I/O: command/status = 0x934, data = 0x930
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
e820: reserve RAM buffer [mem 0xc7607000-0xc7ffffff]
e820: reserve RAM buffer [mem 0xc8cd9000-0xcbffffff]
e820: reserve RAM buffer [mem 0xdadcb000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdb0a4000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdbb00000-0xdbffffff]
e820: reserve RAM buffer [mem 0x41e800000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x1800-0x18fe] could not be reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x1854-0x1857] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs DLL062c PNP0f13 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (disabled)
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: [mem 0xf7fe0000-0xf7feffff] has been reserved
system 00:06: [mem 0xf7ff0000-0xf7ffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff]
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff]
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xdf800000-0xfeafffff window]
pci_bus 0000:01: resource 1 [mem 0xf7100000-0xf71fffff]
pci_bus 0000:02: resource 1 [mem 0xf7000000-0xf70fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 31088k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd6dcb000-0xdadcb000] (64MB) mapped at [ffff8800d6dcb000-ffff8800dadcafff]
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
sha1_ssse3: Using AVX2 optimized SHA-1 implementation
sha256_ssse3: Using AVX2 optimized SHA-256 implementation
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1486548955.093:1): initialized
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 31875
Key type big_key registered
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x3D
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM] (25 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:02: registered as thermal_zone2
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 21, io mem 0xf7242000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.0-514.2.2.el7.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 45 for MSI/MSI-X
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.10.0-514.2.2.el7.x86_64 xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 11 ports detected
ACPI: Battery Slot [BAT0] (battery present)
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.10.0-514.2.2.el7.x86_64 xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Warning: Keylock active
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Intel P-state driver initializing.
cpuidle: using governor menu
hidraw: raw HID events driver (C) Jiri Kosina
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
microcode: CPU0 sig=0x306d4, pf=0x40, revision=0x24
microcode: CPU1 sig=0x306d4, pf=0x40, revision=0x24
microcode: CPU2 sig=0x306d4, pf=0x40, revision=0x24
microcode: CPU3 sig=0x306d4, pf=0x40, revision=0x24
microcode: Microcode Update Driver: v2.01 , Peter Oruba
Loading compiled-in X.509 certificates
Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
Loaded X.509 cert 'CentOS Linux kernel signing key: 54ce18d547ab7033f7fe231622137477981a3181'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
IMA: No TPM chip found, activating TPM-bypass!
rtc_cmos 00:01: setting system clock to 2017-02-08 10:15:56 UTC (1486548956)
Freeing unused kernel memory: 1680k freed
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Reached target Timers.
systemd[1]: Starting Timers.
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting Local File Systems.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
systemd[1]: Starting system-systemd\x2dcryptsetup.slice.
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Reached target Sockets.
systemd[1]: Starting Sockets.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Journal Service.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
[drm] Initialized drm 1.1.0 20060810
sdhci-pci 0000:01:00.0: SDHCI controller found [1217:8520] (rev 1)
mmc0: Unknown controller version (3). You may experience problems.
sdhci-pci 0000:01:00.0: No vmmc regulator found
sdhci-pci 0000:01:00.0: No vqmmc regulator found
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
mmc0: SDHCI controller on PCI [0000:01:00.0] using ADMA
libata version 3.00 loaded.
AES CTR mode by8 optimization enabled
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
alg: No test for crc32 (crc32-pclmul)
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new full-speed USB device number 2 using xhci_hcd
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 34:e6:d7:41:72:32
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
usb 1-1: New USB device found, idVendor=8087, idProduct=8001
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 8 ports detected
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part sxs deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m2048@0xf7241000 port 0xf7241100 irq 47
ata2: SATA max UDMA/133 abar m2048@0xf7241000 port 0xf7241180 irq 47
[drm] Memory usable by graphics device = 4096M
[drm] Replacing VGA console driver
Console: switching to colour dummy device 80x25
[drm] ACPI BIOS requests an excessive sleep of 20000 ms, using 1500 ms instead
i915 0000:00:02.0: irq 48 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
fbcon: inteldrmfb (fb0) is primary device
usb 2-1: New USB device found, idVendor=041e, idProduct=323d
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: Sound Blaster Play! 2
usb 2-1: Manufacturer: Creative Technology Ltd
usb 2-1: SerialNumber: 000000000232
input: Creative Technology Ltd Sound Blaster Play! 2 as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.3/input/input5
usb 1-1.3: new full-speed USB device number 3 using ehci-pci
hid-generic 0003:041E:323D.0001: input,hiddev0,hidraw0: USB HID v1.00 Device [Creative Technology Ltd Sound Blaster Play! 2] on usb-0000:00:14.0-1/input3
ata1: SATA link down (SStatus 0 SControl 300)
usb 1-1.3: New USB device found, idVendor=8087, idProduct=0a2a
usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
usb 2-4: new full-speed USB device number 3 using xhci_hcd
usb 1-1.6: new high-speed USB device number 4 using ehci-pci
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[drm] Initialized i915 1.6.0 20160229 for 0000:00:02.0 on minor 0
tsc: Refined TSC clocksource calibration: 2294.691 MHz
Switched to clocksource tsc
usb 1-1.6: New USB device found, idVendor=0c45, idProduct=6709
usb 1-1.6: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-1.6: Product: Integrated_Webcam_HD
usb 1-1.6: Manufacturer: CN0FHKK7724874C2F0JBA00
usb 2-4: New USB device found, idVendor=09da, idProduct=f6e3
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-4: Product: USB Device
usb 2-4: Manufacturer: COMPANY
input: COMPANY USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/input/input7
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: READ LOG DMA EXT failed, trying unqueued
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
ata2.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0BB6Q, max UDMA/133
ata2.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA Samsung SSD 840 BB6Q PQ: 0 ANSI: 5
input: DualPoint Stick as /devices/platform/i8042/serio1/input/input8
hid-generic 0003:09DA:F6E3.0002: input,hidraw1: USB HID v1.11 Keyboard [COMPANY USB Device] on usb-0000:00:14.0-4/input0
input: COMPANY USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.1/input/input9
hid-generic 0003:09DA:F6E3.0003: input,hidraw2: USB HID v1.11 Mouse [COMPANY USB Device] on usb-0000:00:14.0-4/input1
input: COMPANY USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.2/input/input10
input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input11
hid-generic 0003:09DA:F6E3.0004: input,hiddev0,hidraw3: USB HID v1.11 Keyboard [COMPANY USB Device] on usb-0000:00:14.0-4/input2
usb 2-7: new full-speed USB device number 4 using xhci_hcd
usb 2-7: New USB device found, idVendor=0a5c, idProduct=5804
usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-7: Product: 5880
usb 2-7: Manufacturer: Broadcom Corp
usb 2-7: SerialNumber: 0123456789ABCD
usb 2-7: config 0 descriptor??
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 1:0:0:0: [sda] Attached SCSI disk
alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
SGI XFS with ACLs, security attributes, no debug enabled
XFS (dm-1): Mounting V4 Filesystem
XFS (dm-1): Ending clean mount
systemd-journald[113]: Received SIGTERM from PID 1 (systemd).
SELinux: 2048 avtab hash slots, 104841 rules.
SELinux: 2048 avtab hash slots, 104841 rules.
SELinux: 8 users, 14 roles, 4980 types, 301 bools, 1 sens, 1024 cats
SELinux: 91 classes, 104841 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
type=1403 audit(1486548967.268:2): policy loaded auid=4294967295 ses=4294967295
systemd[1]: Successfully loaded SELinux policy in 198.822ms.
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: Inserted module 'ip_tables'
systemd[1]: Relabelled /dev and /run in 15.046ms.
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
systemd-journald[712]: Received request to flush runtime journal from PID 1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
ACPI Warning: \_SB_.IETM._ART: Return Package type mismatch at index 0 - found Integer, expected Reference (20130517/nspredef-283)
ACPI: Invalid package element [0]: got number, expecing [R]
Invalid _ART data
int3400 thermal: probe of INT3400:00 failed with error -14
parport_pc 00:05: [io 0x0378-0x037b]
parport_pc 00:05: [irq 5]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
wmi: Mapper loaded
snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
mei_me 0000:00:16.0: irq 50 for MSI/MSI-X
snd_hda_intel 0000:00:03.0: irq 51 for MSI/MSI-X
sd 1:0:0:0: Attached scsi generic sg0 type 0
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20130517/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
Linux video capture interface: v2.00
parport_pc 00:05: activated
parport_pc 00:05: reported by Plug and Play ACPI
iwlwifi 0000:02:00.0: irq 52 for MSI/MSI-X
parport_pc 00:05: disabled
input: PC Speaker as /devices/platform/pcspkr/input/input12
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
iwlwifi 0000:02:00.0: loaded firmware version 21.302800.0 op_mode iwlmvm
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3235: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a
snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x13
uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:6709)
usbcore: registered new interface driver btusb
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
Bluetooth: hci0: read Intel version: 370810011003110e00
input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
usbcore: registered new interface driver snd-usb-audio
input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input19
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
intel_rapl: RAPL package 0 domain package locked by BIOS
intel_rapl: RAPL package 0 domain dram locked by BIOS
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
input: Dell WMI hotkeys as /devices/virtual/input/input20
ppdev: user-space parallel port driver
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
XFS (sda1): Mounting V4 Filesystem
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
Adding 8191996k swap on /dev/mapper/centos-swap. Priority:-1 extents:1 across:8191996k SSFS
XFS (dm-3): Mounting V4 Filesystem
XFS (dm-3): Ending clean mount
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
XFS (sda1): Ending clean mount
type=1305 audit(1486548970.242:3): audit_pid=915 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
e1000e: em1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
Ebtables v2.0 registered
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered listening state
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
virbr0: port 1(virbr0-nic) entered disabled state
fuse init (API version 7.22)
TCP: lp registered
perf: interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
perf: interrupt took too long (3175 > 3127), lowering kernel.perf_event_max_sample_rate to 63000
perf: interrupt took too long (4039 > 3968), lowering kernel.perf_event_max_sample_rate to 49000
e1000e: em1 NIC Link is Down
usb 2-4: USB disconnect, device number 3
[drm:intel_mst_disable_dp [i915]] *ERROR* failed to update payload -22
dell_wmi: Received unknown WMI event (0x0)
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with 2a:a4:3c:31:ce:54
wlp2s0: send auth to 2a:a4:3c:31:ce:54 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with 2a:a4:3c:31:ce:54 (try 1/3)
wlp2s0: RX AssocResp from 2a:a4:3c:31:ce:54 (capab=0x431 status=0 aid=4)
wlp2s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
usb 2-4: new full-speed USB device number 5 using xhci_hcd
usb 2-4: New USB device found, idVendor=09da, idProduct=f6e3
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-4: Product: USB Device
usb 2-4: Manufacturer: COMPANY
input: COMPANY USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/input/input21
hid-generic 0003:09DA:F6E3.0005: input,hidraw1: USB HID v1.11 Keyboard [COMPANY USB Device] on usb-0000:00:14.0-4/input0
input: COMPANY USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.1/input/input22
hid-generic 0003:09DA:F6E3.0006: input,hidraw2: USB HID v1.11 Mouse [COMPANY USB Device] on usb-0000:00:14.0-4/input1
input: COMPANY USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.2/input/input23
hid-generic 0003:09DA:F6E3.0007: input,hiddev0,hidraw3: USB HID v1.11 Keyboard [COMPANY USB Device] on usb-0000:00:14.0-4/input2
e1000e: em1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
dell_wmi: Received unknown WMI event (0x0)
wlp2s0: disconnect from AP 2a:a4:3c:31:ce:54 for new auth to 4a:d9:e7:75:82:e4
wlp2s0: authenticate with 4a:d9:e7:75:82:e4
wlp2s0: send auth to 4a:d9:e7:75:82:e4 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with 4a:d9:e7:75:82:e4 (try 1/3)
wlp2s0: RX AssocResp from 4a:d9:e7:75:82:e4 (capab=0x431 status=0 aid=2)
wlp2s0: associated
wlp2s0: deauthenticating from 4a:d9:e7:75:82:e4 by local choice (Reason: 3=DEAUTH_LEAVING)
Some message