dmesg - pruebas-RAM

Return To pruebas-RAM System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-31-generic (buildd@lgw01-43) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #50~14.04.1-Ubuntu SMP Wed Jul 13 01:07:32 UTC 2016 (Ubuntu 4.4.0-31.50~14.04.1-generic 4.4.13)
Command line: BOOT_IMAGE=/vmlinuz-4.4.0-31-generic root=/dev/mapper/HDs-raiz_crypt ro nomdmonddf nomdmonisw
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007ffeffff] usable
BIOS-e820: [mem 0x000000007fff0000-0x000000007fffffff] ACPI data
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
Hypervisor detected: KVM
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x7fff0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR variable ranges disabled:
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
MTRR: Disabled
CPU MTRRs all blank - virtualized system.
found SMP MP-table at [mem 0x0009fff0-0x0009ffff] mapped at [ffff88000009fff0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
BRK [0x02003000, 0x02003fff] PGTABLE
BRK [0x02004000, 0x02004fff] PGTABLE
BRK [0x02005000, 0x02005fff] PGTABLE
BRK [0x02006000, 0x02006fff] PGTABLE
BRK [0x02007000, 0x02007fff] PGTABLE
RAMDISK: [mem 0x33b94000-0x35dc1fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000E0000 000024 (v02 VBOX  )
ACPI: XSDT 0x000000007FFF0030 00003C (v01 VBOX   VBOXXSDT 00000001 ASL  00000061)
ACPI: FACP 0x000000007FFF00F0 0000F4 (v04 VBOX   VBOXFACP 00000001 ASL  00000061)
ACPI: DSDT 0x000000007FFF0470 00210F (v01 VBOX   VBOXBIOS 00000002 INTL 20100528)
ACPI: FACS 0x000000007FFF0200 000040
ACPI: FACS 0x000000007FFF0200 000040
ACPI: APIC 0x000000007FFF0240 00005C (v02 VBOX   VBOXAPIC 00000001 ASL  00000061)
ACPI: SSDT 0x000000007FFF02A0 0001CC (v01 VBOX   VBOXCPUT 00000002 INTL 20100528)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000007ffeffff]
NODE_DATA(0) allocated [mem 0x7ffeb000-0x7ffeffff]
kvm-clock: Using msrs 4b564d01 and 4b564d00
kvm-clock: cpu 0, msr 0:7ffe7001, primary cpu clock
kvm-clock: using sched offset of 6367821379 cycles
clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x000000007ffeffff]
  Normal   empty
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009efff]
  node   0: [mem 0x0000000000100000-0x000000007ffeffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffeffff]
On node 0 totalpages: 524174
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3998 pages, LIFO batch:0
  DMA32 zone: 8128 pages used for memmap
  DMA32 zone: 520176 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
e820: [mem 0x80000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on KVM
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88007fc00000 s98008 r8192 d28968 u1048576
pcpu-alloc: s98008 r8192 d28968 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1 
PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 515961
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=/vmlinuz-4.4.0-31-generic root=/dev/mapper/HDs-raiz_crypt ro nomdmonddf nomdmonisw
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2011868K/2096696K available (8174K kernel code, 1291K rwdata, 3956K rodata, 1484K init, 1292K bss, 84828K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 64.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
NR_IRQS:16640 nr_irqs:440 16
Console: colour dummy device 80x25
console [tty0] enabled
tsc: Detected 2294.784 MHz processor
Calibrating delay loop (skipped) preset value.. 4589.56 BogoMIPS (lpj=9179136)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 0 MCE banks
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff81eb7000 - ffffffff81ebe000)
ftrace: allocating 32026 entries in 126 pages
smpboot: Max logical packages: 1
smpboot: APIC(0) Converting physical 0 to logical package 0
x2apic enabled
Switched APIC routing to physical x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz (family: 0x6, model: 0x3a, stepping: 0x9)
Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only.
KVM setup paravirtual spinlock
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
kvm-clock: cpu 1, msr 0:7ffe7041, secondary cpu clock
mce: CPU supports 0 MCE banks
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (9179.13 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 18:39:57, date: 12/22/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150930/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20150930/hwxface-580)
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xffdfffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a
pci 0000:00:01.1: reg 0x20: [io  0xd000-0xd00f]
pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe7ffffff pref]
pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
pci 0000:00:03.0: reg 0x10: [mem 0xf0000000-0xf001ffff]
pci 0000:00:03.0: reg 0x18: [io  0xd010-0xd017]
pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [io  0xd020-0xd03f]
pci 0000:00:04.0: reg 0x14: [mem 0xf0400000-0xf07fffff]
pci 0000:00:04.0: reg 0x18: [mem 0xf0800000-0xf0803fff pref]
pci 0000:00:05.0: [8086:2415] type 00 class 0x040100
pci 0000:00:05.0: reg 0x10: [io  0xd100-0xd1ff]
pci 0000:00:05.0: reg 0x14: [io  0xd200-0xd23f]
pci 0000:00:06.0: [106b:003f] type 00 class 0x0c0310
pci 0000:00:06.0: reg 0x10: [mem 0xf0804000-0xf0804fff]
pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
pci 0000:00:07.0: quirk: [io  0x4000-0x403f] claimed by PIIX4 ACPI
pci 0000:00:07.0: quirk: [io  0x4100-0x410f] claimed by PIIX4 SMB
pci 0000:00:08.0: [8086:100e] type 00 class 0x020000
pci 0000:00:08.0: reg 0x10: [mem 0xf0820000-0xf083ffff]
pci 0000:00:08.0: reg 0x18: [io  0xd240-0xd247]
pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601
pci 0000:00:0d.0: reg 0x10: [io  0xd248-0xd24f]
pci 0000:00:0d.0: reg 0x18: [io  0xd258-0xd25f]
pci 0000:00:0d.0: reg 0x20: [io  0xd270-0xd27f]
pci 0000:00:0d.0: reg 0x24: [mem 0xf0840000-0xf0841fff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
ACPI: Enabled 2 GPEs in block 00 to 07
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7fff0000-0x7fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
clocksource: Switched to clocksource kvm-clock
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 (active)
pnp: PnP ACPI: found 2 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x80000000-0xffdfffff window]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 35000K (ffff880033b94000 - ffff880035dc2000)
RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 10737418240 ms ovfl timer
hw unit of domain pp0-core 2^-0 Joules
hw unit of domain package 2^-0 Joules
hw unit of domain pp1-gpu 2^-0 Joules
platform rtc_cmos: registered platform RTC device (no PNP device found)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 512 (order: 3, 32768 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1482432005.656:1): initialized
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.23)
Key type big_key registered
Allocating IMA MOK and blacklist keyrings.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90000400000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 58
ACPI: AC Adapter [AC] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
ACPI: Sleep Button [SLPF]
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT0] (battery present)
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:01.1: version 2.13
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:06.0: OHCI PCI host controller
ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 1
ohci-pci 0000:00:06.0: irq 22, io mem 0xf0804000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI PCI host controller
usb usb1: Manufacturer: Linux 4.4.0-31-generic ohci_hcd
usb usb1: SerialNumber: 0000:00:06.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 12 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x19
microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x19
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 6e1dec312b99cf2987117ed2153b9a730dee12a7'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
  Magic number: 12:732:696
rtc_cmos rtc_cmos: setting system clock to 2016-12-22 18:39:58 UTC (1482431998)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
ata1.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM            VBOX     CD-ROM           1.0  PQ: 0 ANSI: 5
sr 0:0:0:0: [sr0] scsi3-mmc drive: 32x/32x xa/form2 tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
Freeing unused kernel memory: 1484K (ffffffff81d44000 - ffffffff81eb7000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 4K (ffff8800017ff000 - ffff880001800000)
Freeing unused kernel memory: 140K (ffff880001bdd000 - ffff880001c00000)
systemd-udevd[131]: starting version 204
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input5
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
usb 1-1: new full-speed USB device number 2 using ohci-pci
e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:89:2f:be
e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
ahci 0000:00:0d.0: version 3.0
ahci 0000:00:0d.0: SSS flag set, parallel bus scan disabled
ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc 
scsi host2: ahci
scsi host3: ahci
ata3: SATA max UDMA/133 abar m8192@0xf0840000 port 0xf0840100 irq 21
ata4: SATA max UDMA/133 abar m8192@0xf0840000 port 0xf0840180 irq 21
usb 1-1: New USB device found, idVendor=80ee, idProduct=0021
usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 1-1: Product: USB Tablet
usb 1-1: Manufacturer: VirtualBox
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/0003:80EE:0021.0001/input/input6
hid-generic 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
ata3.00: 25165824 sectors, multi 128: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      VBOX HARDDISK    1.0  PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 25165824 512-byte logical blocks: (12.9 GB/12.0 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1
sd 2:0:0:0: [sda] Attached SCSI disk
e1000 0000:00:08.0 eth1: (PCI:33MHz:32-bit) 08:00:27:db:b5:87
e1000 0000:00:08.0 eth1: Intel(R) PRO/1000 Network Connection
tsc: Refined TSC clocksource calibration: 2295.128 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x21153ae5a25, max_idle_ns: 440795307114 ns
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
ata4.00: 25165824 sectors, multi 128: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access     ATA      VBOX HARDDISK    1.0  PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: [sdb] 25165824 512-byte logical blocks: (12.9 GB/12.0 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 3:0:0:0: [sdb] Attached SCSI disk
md: bind
md: bind
md: raid1 personality registered for level 1
md/raid1:md0: not clean -- starting background reconstruction
md/raid1:md0: active with 2 out of 2 mirrors
md0: detected capacity change from 0 to 12874285056
md: resync of RAID array md0
md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
md: using 128k window, over a total of 12572544k.
random: lvm urandom read with 67 bits of entropy available
random: nonblocking pool is initialized
floppy0: no floppy controllers found
md: linear personality registered for level -1
md: multipath personality registered for level -4
md: raid0 personality registered for level 0
raid6: sse2x1   gen()  8028 MB/s
raid6: sse2x1   xor()  6407 MB/s
raid6: sse2x2   gen() 10207 MB/s
raid6: sse2x2   xor()  7117 MB/s
raid6: sse2x4   gen()  7816 MB/s
raid6: sse2x4   xor()  8543 MB/s
raid6: using algorithm sse2x2 gen() 10207 MB/s
raid6: .... xor() 7117 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function:
   avx       : 18419.000 MB/sec
async_tx: api initialized (async)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
EXT4-fs (dm-4): INFO: recovery required on readonly filesystem
EXT4-fs (dm-4): write access will be enabled during recovery
EXT4-fs (dm-4): orphan cleanup on readonly fs
EXT4-fs (dm-4): 20 orphan inodes deleted
EXT4-fs (dm-4): recovery complete
EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
Adding 997372k swap on /dev/mapper/HDs-swap_crypt.  Priority:-1 extents:1 across:997372k FS
EXT4-fs (dm-4): re-mounted. Opts: errors=remount-ro
systemd-udevd[578]: starting version 204
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
piix4_smbus 0000:00:07.0: SMBus Host Controller at 0x4100, revision 0
vgdrvHeartbeatInit: Setting up heartbeat to trigger every 2000 milliseconds
input: Unspecified device as /devices/pci0000:00/0000:00:04.0/input/input7
vboxguest: misc device minor 55, IRQ 20, I/O port d020, MMIO at 00000000f0400000 (size 0x400000)
vboxguest: Successfully loaded version 5.0.18_Ubuntu (interface 0x00010004)
intel_rapl: no valid rapl domains found in package 0
intel_rapl: no valid rapl domains found in package 0
snd_intel8x0 0000:00:05.0: disable (unknown or VT-d) VM optimization
snd_intel8x0 0000:00:05.0: white list rate for 1028:0177 is 48000
ip_tables: (C) 2000-2006 Netfilter Core Team
audit: type=1400 audit(1482432374.373:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=700 comm="apparmor_parser"
audit: type=1400 audit(1482432374.373:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=700 comm="apparmor_parser"
audit: type=1400 audit(1482432374.373:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=700 comm="apparmor_parser"
audit: type=1400 audit(1482432374.373:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=692 comm="apparmor_parser"
audit: type=1400 audit(1482432374.373:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=692 comm="apparmor_parser"
audit: type=1400 audit(1482432374.373:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=692 comm="apparmor_parser"
audit: type=1400 audit(1482432374.373:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=700 comm="apparmor_parser"
audit: type=1400 audit(1482432374.373:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=700 comm="apparmor_parser"
audit: type=1400 audit(1482432374.373:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=692 comm="apparmor_parser"
audit: type=1400 audit(1482432374.373:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=692 comm="apparmor_parser"
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
floppy0: no floppy controllers found
work still pending
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
systemd-udevd[598]: conflicting device node '/dev/mapper/HDs-hogar_crypt' found, link to '/dev/dm-6' will not be created
EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
init: failsafe main process (1333) killed by TERM signal
audit_printk_skb: 24 callbacks suppressed
audit: type=1400 audit(1482432401.141:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1534 comm="apparmor_parser"
audit: type=1400 audit(1482432401.141:21): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1534 comm="apparmor_parser"
audit: type=1400 audit(1482432401.141:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1534 comm="apparmor_parser"
audit: type=1400 audit(1482432401.145:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1534 comm="apparmor_parser"
audit: type=1400 audit(1482432401.145:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1534 comm="apparmor_parser"
audit: type=1400 audit(1482432401.145:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1534 comm="apparmor_parser"
audit: type=1400 audit(1482432401.161:26): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1533 comm="apparmor_parser"
audit: type=1400 audit(1482432401.161:27): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=1533 comm="apparmor_parser"
audit: type=1400 audit(1482432401.161:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=1533 comm="apparmor_parser"
audit: type=1400 audit(1482432401.241:29): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=1535 comm="apparmor_parser"
init: cups main process (1570) killed by HUP signal
init: cups main process ended, respawning
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
vboxsf: Successfully loaded version 5.0.18_Ubuntu (interface 0x00010004)
init: ssh main process (1690) terminated with status 255
init: ssh main process ended, respawning
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:fb:d0:ae:ec:ed:f8:7c:08:00 SRC=192.168.1.1 DST=224.0.0.251 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=23485 PROTO=2 
[UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:fb:68:5d:43:0d:47:8d:08:00 SRC=192.168.1.36 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=12415 PROTO=2 
[UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:fb:d0:ae:ec:ed:f8:7c:08:00 SRC=192.168.1.1 DST=224.0.0.251 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=23487 PROTO=2 
[UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:fb:68:5d:43:0d:47:8d:08:00 SRC=192.168.1.36 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=12416 PROTO=2 
[UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:fb:d0:ae:ec:ed:f8:7c:08:00 SRC=192.168.1.1 DST=224.0.0.251 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=23488 PROTO=2 
[UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:fb:68:5d:43:0d:47:8d:08:00 SRC=192.168.1.36 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=12417 PROTO=2 
[UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:d0:ae:ec:ed:f8:7c:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=39270 PROTO=2 
[UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:fb:d0:ae:ec:ed:f8:7c:08:00 SRC=192.168.1.1 DST=224.0.0.251 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=23489 PROTO=2 
[UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:fb:68:5d:43:0d:47:8d:08:00 SRC=192.168.1.36 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=12418 PROTO=2 
init: plymouth-upstart-bridge main process ended, respawning
Ebtables v2.0 registered
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
VBoxService 5.1.8 r111374 (verbosity: 0) linux.amd64 (Oct 18 2016 15:52:41) release log
00:00:00.000094 main     Log opened 2016-12-22T18:47:09.214200000Z
00:00:00.000201 main     OS Product: Linux
00:00:00.000236 main     OS Release: 4.4.0-31-generic
00:00:00.000263 main     OS Version: #50~14.04.1-Ubuntu SMP Wed Jul 13 01:07:32 UTC 2016
00:00:00.000289 main     Executable: /opt/VBoxGuestAdditions-5.1.8/sbin/VBoxService
00:00:00.000290 main     Process ID: 2873
00:00:00.000291 main     Package type: LINUX_64BITS_GENERIC
00:00:00.001560 main     5.1.8 r111374 started. Verbose level = 0
audit_printk_skb: 138 callbacks suppressed
audit: type=1400 audit(1482432432.073:76): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3074 comm="apparmor_parser"
audit: type=1400 audit(1482432432.073:77): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3074 comm="apparmor_parser"
audit: type=1400 audit(1482432432.073:78): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3074 comm="apparmor_parser"
init: plymouth-stop pre-start process (3415) terminated with status 1
md: md0: resync done.
RAID1 conf printout:
 --- wd:2 rd:2
 disk 0, wo:0, o:1, dev:sda1
 disk 1, wo:0, o:1, dev:sdb1
TCP: request_sock_TCP: Possible SYN flooding on port 80. Sending cookies.  Check SNMP counters.
usb 1-1: USB disconnect, device number 2
usb 1-1: new full-speed USB device number 3 using ohci-pci
usb 1-1: New USB device found, idVendor=80ee, idProduct=0021
usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 1-1: Product: USB Tablet
usb 1-1: Manufacturer: VirtualBox
input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/0003:80EE:0021.0002/input/input8
e1000: eth1 NIC Link is Down
hid-generic 0003:80EE:0021.0002: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
e1000: eth0 NIC Link is Down
e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
usb 1-1: USB disconnect, device number 3
usb 1-1: new full-speed USB device number 4 using ohci-pci
e1000: eth1 NIC Link is Down
e1000 0000:00:08.0 eth1: Reset adapter
usb 1-1: New USB device found, idVendor=80ee, idProduct=0021
usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 1-1: Product: USB Tablet
usb 1-1: Manufacturer: VirtualBox
input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/0003:80EE:0021.0003/input/input9
hid-generic 0003:80EE:0021.0003: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
e1000: eth0 NIC Link is Down
e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
systemd-hostnamed[7922]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!

Return To pruebas-RAM System Information