dmesg - firstCPU
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-47-generic (buildd@lcy01-03) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.2) ) #68-Ubuntu SMP Wed Oct 26 19:39:52 UTC 2016 (Ubuntu 4.4.0-47.68-generic 4.4.24)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
tseg: 009fc00000
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000006dfff] usable
BIOS-e820: [mem 0x000000000006e000-0x000000000006ffff] ACPI NVS
BIOS-e820: [mem 0x0000000000070000-0x0000000000085fff] usable
BIOS-e820: [mem 0x0000000000086000-0x00000000000bffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000095784fff] usable
BIOS-e820: [mem 0x0000000095785000-0x0000000095f85fff] reserved
BIOS-e820: [mem 0x0000000095f86000-0x0000000095ffbfff] usable
BIOS-e820: [mem 0x0000000095ffc000-0x00000000973fbfff] reserved
BIOS-e820: [mem 0x00000000973fc000-0x000000009f2befff] usable
BIOS-e820: [mem 0x000000009f2bf000-0x000000009fabefff] reserved
BIOS-e820: [mem 0x000000009fabf000-0x000000009fbbefff] ACPI NVS
BIOS-e820: [mem 0x000000009fbbf000-0x000000009fbfefff] ACPI data
BIOS-e820: [mem 0x000000009fbff000-0x000000009fbfffff] usable
BIOS-e820: [mem 0x000000009fc00000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000012effffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x95338018-0x95347257] usable ==> usable
e820: update [mem 0x9532f018-0x95337857] usable ==> usable
e820: update [mem 0x95322018-0x9532e057] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000006dfff] usable
reserve setup_data: [mem 0x000000000006e000-0x000000000006ffff] ACPI NVS
reserve setup_data: [mem 0x0000000000070000-0x0000000000085fff] usable
reserve setup_data: [mem 0x0000000000086000-0x00000000000bffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000095322017] usable
reserve setup_data: [mem 0x0000000095322018-0x000000009532e057] usable
reserve setup_data: [mem 0x000000009532e058-0x000000009532f017] usable
reserve setup_data: [mem 0x000000009532f018-0x0000000095337857] usable
reserve setup_data: [mem 0x0000000095337858-0x0000000095338017] usable
reserve setup_data: [mem 0x0000000095338018-0x0000000095347257] usable
reserve setup_data: [mem 0x0000000095347258-0x0000000095784fff] usable
reserve setup_data: [mem 0x0000000095785000-0x0000000095f85fff] reserved
reserve setup_data: [mem 0x0000000095f86000-0x0000000095ffbfff] usable
reserve setup_data: [mem 0x0000000095ffc000-0x00000000973fbfff] reserved
reserve setup_data: [mem 0x00000000973fc000-0x000000009f2befff] usable
reserve setup_data: [mem 0x000000009f2bf000-0x000000009fabefff] reserved
reserve setup_data: [mem 0x000000009fabf000-0x000000009fbbefff] ACPI NVS
reserve setup_data: [mem 0x000000009fbbf000-0x000000009fbfefff] ACPI data
reserve setup_data: [mem 0x000000009fbff000-0x000000009fbfffff] usable
reserve setup_data: [mem 0x000000009fc00000-0x00000000cfffffff] reserved
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
reserve setup_data: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000012effffff] usable
efi: EFI v2.31 by INSYDE Corp.
efi: ACPI=0x9fbfe000 ACPI 2.0=0x9fbfe014 SMBIOS=0x9fabef98
SMBIOS 2.7 present.
DMI: Hewlett-Packard HP Pavilion 15 Notebook PC/216C, BIOS F.15 06/03/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x12f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFE0000000 write-back
2 base 00009FBBD000 mask FFFFFFFFF000 uncachable
3 base 0000FFC00000 mask FFFFFFC00000 write-protect
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000012f000000 aka 4848M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x9fc00 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000080000] 80000 size 24576
Using GB pages for direct mapping
BRK [0x02202000, 0x02202fff] PGTABLE
BRK [0x02203000, 0x02203fff] PGTABLE
BRK [0x02204000, 0x02204fff] PGTABLE
BRK [0x02205000, 0x02205fff] PGTABLE
BRK [0x02206000, 0x02206fff] PGTABLE
BRK [0x02207000, 0x02207fff] PGTABLE
RAMDISK: [mem 0x3dd46000-0x3fffafff]
Secure boot enabled
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000009FBFE014 000024 (v02 HPQOEM)
ACPI: XSDT 0x000000009FBFE120 00009C (v01 HPQOEM SLIC-MPC 00000001 HP 01000013)
ACPI: FACP 0x000000009FBFC000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000)
ACPI: DSDT 0x000000009FBE6000 011A9E (v01 HPQOEM 216C F0000000 ACPI 00040000)
ACPI: FACS 0x000000009FB7A000 000040
ACPI: UEFI 0x000000009FBFD000 0001B6 (v01 HPQOEM 216C 00000001 HP 00040000)
ACPI: HPET 0x000000009FBFB000 000038 (v01 HPQOEM 216C 00000001 HP 00040000)
ACPI: APIC 0x000000009FBFA000 000084 (v03 HPQOEM 216C 00000001 HP 00040000)
ACPI: MCFG 0x000000009FBF9000 00003C (v01 HPQOEM 216C 00000001 HP 00040000)
ACPI: ASF! 0x000000009FBF8000 0000A5 (v32 HPQOEM 216C 00000001 HP 00040000)
ACPI: BOOT 0x000000009FBE5000 000028 (v01 HPQOEM 216C 00000001 HP 00040000)
ACPI: WDRT 0x000000009FBE4000 000047 (v01 HPQOEM 216C 00000000 HP 00040000)
ACPI: WDAT 0x000000009FBE3000 0001AC (v01 HPQOEM 216C 00000001 HP 00040000)
ACPI: FPDT 0x000000009FBE1000 000044 (v01 HPQOEM 216C 00000001 HP 00040000)
ACPI: MSDM 0x000000009FBE0000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
ACPI: SSDT 0x000000009FBDF000 0009F8 (v01 HPQOEM 216C 00000001 ACPI 00040000)
ACPI: SSDT 0x000000009FBDD000 001F6E (v02 HPQOEM 216C 00000001 ACPI 00040000)
ACPI: VFCT 0x000000009FBD7000 005084 (v01 HPQOEM 216C 00000001 HP 00040000)
ACPI: BGRT 0x000000009FBD6000 000038 (v01 HPQOEM 216C 00000001 HP 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000012effffff]
NODE_DATA(0) allocated [mem 0x12eff7000-0x12effbfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000012effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000006dfff]
node 0: [mem 0x0000000000070000-0x0000000000085fff]
node 0: [mem 0x0000000000100000-0x0000000095784fff]
node 0: [mem 0x0000000095f86000-0x0000000095ffbfff]
node 0: [mem 0x00000000973fc000-0x000000009f2befff]
node 0: [mem 0x000000009fbff000-0x000000009fbfffff]
node 0: [mem 0x0000000100000000-0x000000012effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000012effffff]
On node 0 totalpages: 837186
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3971 pages, LIFO batch:0
DMA32 zone: 10011 pages used for memmap
DMA32 zone: 640703 pages, LIFO batch:31
Normal zone: 3008 pages used for memmap
Normal zone: 192512 pages, LIFO batch:31
tboot: non-0 tboot_addr but it is not of type E820_RESERVED
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0006e000-0x0006ffff]
PM: Registered nosave memory: [mem 0x00086000-0x000bffff]
PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
PM: Registered nosave memory: [mem 0x95322000-0x95322fff]
PM: Registered nosave memory: [mem 0x9532e000-0x9532efff]
PM: Registered nosave memory: [mem 0x9532f000-0x9532ffff]
PM: Registered nosave memory: [mem 0x95337000-0x95337fff]
PM: Registered nosave memory: [mem 0x95338000-0x95338fff]
PM: Registered nosave memory: [mem 0x95347000-0x95347fff]
PM: Registered nosave memory: [mem 0x95785000-0x95f85fff]
PM: Registered nosave memory: [mem 0x95ffc000-0x973fbfff]
PM: Registered nosave memory: [mem 0x9f2bf000-0x9fabefff]
PM: Registered nosave memory: [mem 0x9fabf000-0x9fbbefff]
PM: Registered nosave memory: [mem 0x9fbbf000-0x9fbfefff]
PM: Registered nosave memory: [mem 0x9fc00000-0xcfffffff]
PM: Registered nosave memory: [mem 0xd0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
e820: [mem 0xd0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88012ec00000 s98008 r8192 d28968 u524288
pcpu-alloc: s98008 r8192 d28968 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 824082
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3124864K/3348744K available (8423K kernel code, 1285K rwdata, 3952K rodata, 1480K init, 1292K bss, 223880K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:456 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1996.377 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3992.75 BogoMIPS (lpj=7985508)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 3 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
[Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffff820b5000 - ffffffff820bd000)
ftrace: allocating 32047 entries in 126 pages
smpboot: Max logical packages: 2
smpboot: APIC(10) Converting physical 1 to logical package 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A10-4655M APU with Radeon(tm) HD Graphics (family: 0x15, model: 0x10, stepping: 0x1)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1
[Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
#2
[Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
#3
[Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (15971.01 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x0006e000-0x0006ffff] (8192 bytes)
PM: Registering ACPI NVS region [mem 0x9fabf000-0x9fbbefff] (1048576 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 7:30:03, date: 11/24/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
Simple Boot Flag at 0x44 set to 0x1
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PME]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff window]
pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff window]
pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
pci 0000:00:01.0: [1002:9907] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
pci 0000:00:01.0: reg 0x14: [io 0x4000-0x40ff]
pci 0000:00:01.0: reg 0x18: [mem 0xf0400000-0xf043ffff]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xf0444000-0xf0447fff]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:02.0: [1022:1412] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [1022:1415] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: System wakeup disabled by ACPI
pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xf0448000-0xf0449fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1022:7804] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0x4118-0x411f]
pci 0000:00:11.0: reg 0x14: [io 0x4124-0x4127]
pci 0000:00:11.0: reg 0x18: [io 0x4110-0x4117]
pci 0000:00:11.0: reg 0x1c: [io 0x4120-0x4123]
pci 0000:00:11.0: reg 0x20: [io 0x4100-0x410f]
pci 0000:00:11.0: reg 0x24: [mem 0xf044e000-0xf044e7ff]
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xf044d000-0xf044dfff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xf044c000-0xf044c0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xf044b000-0xf044bfff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xf044a000-0xf044a0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xf0440000-0xf0443fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
pci 0000:01:00.0: [1002:6660] type 00 class 0x038000
pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xf0300000-0xf033ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0x3000-0x30ff]
pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:02.0: bridge window [mem 0xf0300000-0xf03fffff]
pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: [1814:3290] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xf0210000-0xf021ffff]
pci 0000:02:00.0: PME# supported from D0 D3hot
pci 0000:02:00.1: [1814:3298] type 00 class 0x0d1100
pci 0000:02:00.1: reg 0x10: [mem 0xf0200000-0xf020ffff]
pci 0000:02:00.1: supports D1
pci 0000:02:00.1: PME# supported from D0 D1 D3hot
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [mem 0xf0200000-0xf02fffff]
pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
pci 0000:03:00.0: reg 0x18: [mem 0xf0104000-0xf0104fff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xf0100000-0xf0103fff 64bit pref]
pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:05.0: PCI bridge to [bus 03]
pci 0000:00:05.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:05.0: bridge window [mem 0xf0100000-0xf01fffff]
pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xd0000000-0xf7ffffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfed3ffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff window] (subtractive decode)
pci 0000:05:00.0: [10ec:5229] type 00 class 0xff0000
pci 0000:05:00.0: reg 0x10: [mem 0xf0000000-0xf0000fff]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D1 D2 D3hot
pci 0000:00:15.0: PCI bridge to [bus 05]
pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf00fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: Enabled 1 GPEs in block 00 to 1F
ACPI : EC: GPE = 0x5, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:01.0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0006e000-0x0006ffff]
e820: reserve RAM buffer [mem 0x00086000-0x0008ffff]
e820: reserve RAM buffer [mem 0x95322018-0x97ffffff]
e820: reserve RAM buffer [mem 0x9532f018-0x97ffffff]
e820: reserve RAM buffer [mem 0x95338018-0x97ffffff]
e820: reserve RAM buffer [mem 0x95785000-0x97ffffff]
e820: reserve RAM buffer [mem 0x95ffc000-0x97ffffff]
e820: reserve RAM buffer [mem 0x9f2bf000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9fc00000-0x9fffffff]
e820: reserve RAM buffer [mem 0x12f000000-0x12fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:00: [mem 0xfed80000-0xfed81fff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
pnp 00:03: Plug and Play ACPI device, IDs SYN1ea3 SYN1e00 SYN0002 PNP0f13 (active)
system 00:04: [io 0x0400-0x04cf] could not be reserved
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x04d6] has been reserved
system 00:04: [io 0x0680-0x06ff] has been reserved
system 00:04: [io 0x077a] has been reserved
system 00:04: [io 0x0c00-0x0c01] has been reserved
system 00:04: [io 0x0c14] has been reserved
system 00:04: [io 0x0c50-0x0c52] has been reserved
system 00:04: [io 0x0c6c] has been reserved
system 00:04: [io 0x0c6f] has been reserved
system 00:04: [io 0x0cd0-0x0cdb] has been reserved
system 00:04: [io 0x0840-0x0847] has been reserved
system 00:04: [io 0x0380-0x0387] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:05: [mem 0xffc00000-0xffffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
pci 0000:03:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
pci 0000:01:00.0: BAR 6: assigned [mem 0xf0340000-0xf035ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:02.0: bridge window [mem 0xf0300000-0xf03fffff]
pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [mem 0xf0200000-0xf02fffff]
pci 0000:03:00.0: BAR 6: assigned [mem 0xf0110000-0xf011ffff pref]
pci 0000:00:05.0: PCI bridge to [bus 03]
pci 0000:00:05.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:05.0: bridge window [mem 0xf0100000-0xf01fffff]
pci 0000:00:14.4: PCI bridge to [bus 04]
pci 0000:00:15.0: PCI bridge to [bus 05]
pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf00fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 19 [mem 0xd0000000-0xf7ffffff window]
pci_bus 0000:00: resource 20 [mem 0xfc000000-0xfed3ffff window]
pci_bus 0000:00: resource 21 [mem 0xfed45000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xf0300000-0xf03fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xf0200000-0xf02fffff]
pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0xf0100000-0xf01fffff]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:04: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:04: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:04: resource 10 [mem 0x000cc000-0x000cffff window]
pci_bus 0000:04: resource 11 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:04: resource 12 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:04: resource 13 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:04: resource 14 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:04: resource 15 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:04: resource 16 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:04: resource 17 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:04: resource 18 [mem 0x000ec000-0x000effff window]
pci_bus 0000:04: resource 19 [mem 0xd0000000-0xf7ffffff window]
pci_bus 0000:04: resource 20 [mem 0xfc000000-0xfed3ffff window]
pci_bus 0000:04: resource 21 [mem 0xfed45000-0xffffffff window]
pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf00fffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 35540K (ffff88003dd46000 - ffff88003fffb000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x97cae000-0x9bcae000] (64MB) mapped at [ffff880097cae000-ffff88009bcadfff]
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1479972603.988:1): initialized
Initialise system trusted keyring
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.23)
Key type big_key registered
Allocating IMA MOK and blacklist keyrings.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:02.0:pcie04: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ LLActRep+
pciehp 0000:00:02.0:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xd0000000, mapped to 0xffffc90001000000, using 4224k, total 4224k
efifb: mode is 1366x768x32, linelength=5632, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 170x48
fb0: EFI VGA frame buffer device
ACPI: AC Adapter [ACAD] (off-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (41 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xf044c000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-47-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xf044a000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-47-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:12.0: irq 18, io mem 0xf044d000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 4.4.0-47-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:13.0: irq 18, io mem 0xf044b000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 4.4.0-47-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:13.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.4.0-47-generic xhci-hcd
usb usb5: SerialNumber: 0000:00:10.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.4.0-47-generic xhci-hcd
usb usb6: SerialNumber: 0000:00:10.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0: patch_level=0x06001119
microcode: CPU1: patch_level=0x06001119
microcode: CPU2: patch_level=0x06001119
microcode: CPU3: patch_level=0x06001119
microcode: Microcode Update Driver: v2.01 , Peter Oruba
EFI: Loaded cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to '.system_keyring'
EFI: Loaded cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to '.system_keyring'
EFI: Loaded cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to '.system_keyring'
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: f7bc719d96df7c6d6fed8f4b9fd5d4ff001383c8'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 8:54:522
usb usb3-port5: hash matches
rtc_cmos 00:01: setting system clock to 2016-11-24 07:30:05 UTC (1479972605)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
ACPI: Battery Slot [BAT0] (battery present)
Freeing unused kernel memory: 1480K (ffffffff81f43000 - ffffffff820b5000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1804K (ffff88000183d000 - ffff880001a00000)
Freeing unused kernel memory: 144K (ffff880001ddc000 - ffff880001e00000)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 12 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 12 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 12 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 12 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 12 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 12 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 12 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 12 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 12 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 12 bits of entropy available)
usb 2-4: new high-speed USB device number 2 using ehci-pci
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
acpi device:00: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
acpi device:06: registered as cooling_device5
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input6
wmi: Mapper loaded
ahci 0000:00:11.0: version 3.0
[drm] Initialized drm 1.1.0 20060810
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 3 ports 3 Gbps 0xb impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
r8169 0000:03:00.0 eth0: RTL8106e at 0xffffc90000698000, a0:48:1c:12:59:1f, XID 04900000 IRQ 31
rtsx_pci 0000:05:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 32
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xf044e000 port 0xf044e100 irq 30
ata2: SATA max UDMA/133 abar m2048@0xf044e000 port 0xf044e180 irq 30
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xf044e000 port 0xf044e280 irq 30
[drm] radeon kernel modesetting enabled.
vga_switcheroo: detected switching method \_SB_.PCI0.VGA_.ATPX handle
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (d0000000 420000) vs hw (d0000000 10000000)
fb: switching to radeondrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (ARUBA 0x1002:0x9907 0x103C:0x216C).
[drm] register mmio base: 0xF0400000
[drm] register mmio size: 262144
[drm] ACPI VFCT contains a BIOS for 00:01.0 1002:9907, size 20480
ATOM BIOS: HP
radeon 0000:00:01.0: VRAM: 768M 0x0000000000000000 - 0x000000002FFFFFFF (768M used)
radeon 0000:00:01.0: GTT: 1024M 0x0000000030000000 - 0x000000006FFFFFFF
[drm] Detected VRAM RAM=768M, BAR=256M
[drm] RAM width 32bits DDR
[TTM] Zone kernel: Available graphics memory: 1606692 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 768M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading ARUBA Microcode
[drm] Internal thermal controller without fan control
[drm] radeon: dpm initialized
[drm] Found VCE firmware/feedback version 50.0.1 / 17!
[drm] GART: num cpu pages 262144, num gpu pages 262144
r8169 0000:03:00.0 eno1: renamed from eth0
usb 2-4: New USB device found, idVendor=0bda, idProduct=571a
usb 2-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 2-4: Product: HP Truevision HD
usb 2-4: Manufacturer: DDFEP019I4ST20
usb 2-4: SerialNumber: 200901010001
[drm] PCIE GART of 1024M enabled (table at 0x00000000002E8000).
radeon 0000:00:01.0: WB enabled
radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000030000c00 and cpu addr 0xffff88003f1a6c00
radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90001835a18
radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000030000c18 and cpu addr 0xffff88003f1a6c18
radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000030000c1c and cpu addr 0xffff88003f1a6c1c
radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000030000c04 and cpu addr 0xffff88003f1a6c04
radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000030000c08 and cpu addr 0xffff88003f1a6c08
radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000030000c0c and cpu addr 0xffff88003f1a6c0c
radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000030000c10 and cpu addr 0xffff88003f1a6c10
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:00:01.0: radeon: MSI limited to 32-bit
radeon 0000:00:01.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ring test on 6 succeeded in 12 usecs
[drm] ring test on 7 succeeded in 3 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
ata4: SATA link down (SStatus 0 SControl 300)
[drm] ib test on ring 5 succeeded
tsc: Refined TSC clocksource calibration: 1996.362 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x398d8354160, max_idle_ns: 881590476460 ns
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATAPI: hp CDDVDW SU-208CB, HH00, max UDMA/100
ata1.00: ATA-9: ST1000LM024 HN-M101MBB, 2AR20002, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/100
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0002 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: CD-ROM hp CDDVDW SU-208CB HH00 PQ: 0 ANSI: 5
sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11
sd 0:0:0:0: [sda] Attached SCSI disk
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] radeon atom DIG backlight initialized
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] eDP-1
[drm] HPD1
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] LCD1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] VGA-1
[drm] HPD2
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] CRT1: INTERNAL_UNIPHY2
[drm] CRT1: NUTMEG
[drm] Connector 2:
[drm] HDMI-A-1
[drm] HPD3
[drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
psmouse serio1: synaptics: queried max coordinates: x [..5696], y [..4884]
psmouse serio1: synaptics: queried min coordinates: x [1276..], y [1044..]
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1c0b1, caps: 0xf00133/0x240000/0xa2400/0x0, board id: 2665, fw id: 1458825
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
clocksource: Switched to clocksource tsc
[drm] fb mappable at 0xD04EC000
[drm] vram apper at 0xD0000000
[drm] size 4325376
[drm] fb depth is 24
[drm] pitch is 5632
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.43.0 20080528 for 0000:00:01.0 on minor 0
radeon 0000:01:00.0: enabling device (0000 -> 0003)
[drm] initializing kernel modesetting (HAINAN 0x1002:0x6660 0x103C:0x216C).
[drm] register mmio base: 0xF0300000
[drm] register mmio size: 262144
vga_switcheroo: enabled
ATPX version 1, functions 0x00000003
ATOM BIOS: HP
[drm] GPU not posted. posting now...
radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 64bits DDR
[drm] radeon: 2048M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading hainan Microcode
[drm] Internal thermal controller without fan control
[drm] probing gen 2 caps for device 1022:1412 = 700d01/6
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] probing gen 2 caps for device 1022:1412 = 700d01/6
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
random: nonblocking pool is initialized
[drm] PCIE GART of 1024M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88003e164c00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88003e164c04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88003e164c08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88003e164c0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88003e164c10
radeon 0000:01:00.0: VCE init error (-22).
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm:radeon_acpi_init [radeon]] *ERROR* Cannot find a backlight controller
[drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 1
EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Created slice System Slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounting Debug File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Started Braille Device Support.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Journal Service...
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Uncomplicated firewall.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Journal Service.
EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro
systemd-journald[251]: Received request to flush runtime journal from PID 1
Initializing HPQ6001 module
input: HP Wireless hotkeys as /devices/virtual/input/input8
hp_accel: laptop model unknown, using default axes configuration
lis3lv02d: 8 bits 3DC sensor found
input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input9
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\_SB_.PCI0.SMBS.SMB0) (20150930/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
input: HP WMI hotkeys as /devices/virtual/input/input10
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
media: Linux media interface: v0.10
Linux video capture interface: v2.00
snd_hda_intel 0000:00:01.1: Force to non-snoop mode
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input11
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3290, rev 0015 detected
input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 3290 detected
uvcvideo: Found UVC 1.00 device HP Truevision HD (0bda:571a)
input: HP Truevision HD as /devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4:1.0/input/input14
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
rt2800pci 0000:02:00.0 wlo1: renamed from wlan0
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Adding 8466428k swap on /dev/sda11. Priority:-1 extents:1 across:8466428k FS
EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[drm] probing gen 2 caps for device 1022:1412 = 700d01/6
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 1024M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88003e164c00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88003e164c04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88003e164c08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88003e164c0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88003e164c10
radeon 0000:01:00.0: VCE init error (-22).
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
audit: type=1400 audit(1479972633.454:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=641 comm="apparmor_parser"
audit: type=1400 audit(1479972633.470:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=638 comm="apparmor_parser"
audit: type=1400 audit(1479972633.470:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=638 comm="apparmor_parser"
audit: type=1400 audit(1479972633.470:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=638 comm="apparmor_parser"
audit: type=1400 audit(1479972633.470:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=638 comm="apparmor_parser"
audit: type=1400 audit(1479972633.470:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=637 comm="apparmor_parser"
audit: type=1400 audit(1479972633.470:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=637 comm="apparmor_parser"
audit: type=1400 audit(1479972633.546:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=643 comm="apparmor_parser"
audit: type=1400 audit(1479972633.562:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=644 comm="apparmor_parser"
audit: type=1400 audit(1479972633.562:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=644 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin'
ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
r8169 0000:03:00.0 eno1: link down
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
wlo1: authenticate with ac:f1:df:2e:70:2a
wlo1: send auth to ac:f1:df:2e:70:2a (try 1/3)
wlo1: authenticated
wlo1: associate with ac:f1:df:2e:70:2a (try 1/3)
wlo1: RX AssocResp from ac:f1:df:2e:70:2a (capab=0x431 status=0 aid=8)
wlo1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlo1: authenticate with ac:f1:df:2e:70:2a
wlo1: send auth to ac:f1:df:2e:70:2a (try 1/3)
wlo1: send auth to ac:f1:df:2e:70:2a (try 2/3)
wlo1: send auth to ac:f1:df:2e:70:2a (try 3/3)
wlo1: authentication with ac:f1:df:2e:70:2a timed out
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
r8169 0000:03:00.0 eno1: link down
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
r8169 0000:03:00.0 eno1: link down
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
r8169 0000:03:00.0 eno1: link down
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
r8169 0000:03:00.0 eno1: link down
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
r8169 0000:03:00.0 eno1: link down
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
wlo1: authenticate with ac:f1:df:2e:70:2a
wlo1: send auth to ac:f1:df:2e:70:2a (try 1/3)
wlo1: authenticated
wlo1: associate with ac:f1:df:2e:70:2a (try 1/3)
wlo1: RX AssocResp from ac:f1:df:2e:70:2a (capab=0x431 status=0 aid=8)
wlo1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
perf interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlo1: authenticate with ac:f1:df:2e:70:2a
wlo1: send auth to ac:f1:df:2e:70:2a (try 1/3)
wlo1: send auth to ac:f1:df:2e:70:2a (try 2/3)
wlo1: send auth to ac:f1:df:2e:70:2a (try 3/3)
wlo1: authentication with ac:f1:df:2e:70:2a timed out
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
r8169 0000:03:00.0 eno1: link down
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
wlo1: authenticate with ac:f1:df:2e:70:2a
wlo1: send auth to ac:f1:df:2e:70:2a (try 1/3)
wlo1: authenticated
wlo1: associate with ac:f1:df:2e:70:2a (try 1/3)
wlo1: RX AssocResp from ac:f1:df:2e:70:2a (capab=0x431 status=0 aid=3)
wlo1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
wlo1: deauthenticating from ac:f1:df:2e:70:2a by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlo1: authenticate with ac:f1:df:2e:70:2a
wlo1: send auth to ac:f1:df:2e:70:2a (try 1/3)
wlo1: authenticated
wlo1: associate with ac:f1:df:2e:70:2a (try 1/3)
wlo1: RX AssocResp from ac:f1:df:2e:70:2a (capab=0x431 status=0 aid=3)
wlo1: associated
wlo1: deauthenticating from ac:f1:df:2e:70:2a by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlo1: authenticate with ac:f1:df:2e:70:2a
wlo1: send auth to ac:f1:df:2e:70:2a (try 1/3)
wlo1: authenticated
wlo1: associate with ac:f1:df:2e:70:2a (try 1/3)
wlo1: RX AssocResp from ac:f1:df:2e:70:2a (capab=0x431 status=0 aid=3)
wlo1: associated
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlo1: authenticate with ac:f1:df:2e:70:2a
wlo1: send auth to ac:f1:df:2e:70:2a (try 1/3)
wlo1: authenticated
wlo1: associate with ac:f1:df:2e:70:2a (try 1/3)
wlo1: RX AssocResp from ac:f1:df:2e:70:2a (capab=0x431 status=0 aid=3)
wlo1: associated
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlo1: authenticate with ac:f1:df:2e:70:2a
wlo1: send auth to ac:f1:df:2e:70:2a (try 1/3)
wlo1: authenticated
wlo1: associate with ac:f1:df:2e:70:2a (try 1/3)
wlo1: RX AssocResp from ac:f1:df:2e:70:2a (capab=0x431 status=0 aid=3)
wlo1: associated
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlo1: authenticate with ac:f1:df:2e:70:2a
wlo1: send auth to ac:f1:df:2e:70:2a (try 1/3)
wlo1: authenticated
wlo1: associate with ac:f1:df:2e:70:2a (try 1/3)
wlo1: RX AssocResp from ac:f1:df:2e:70:2a (capab=0x431 status=0 aid=3)
wlo1: associated
wlo1: deauthenticated from ac:f1:df:2e:70:2a (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlo1: authenticate with ac:f1:df:2e:70:2a
wlo1: send auth to ac:f1:df:2e:70:2a (try 1/3)
wlo1: authenticated
wlo1: associate with ac:f1:df:2e:70:2a (try 1/3)
wlo1: RX AssocResp from ac:f1:df:2e:70:2a (capab=0x431 status=0 aid=3)
wlo1: associated
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlo1: authenticate with ac:f1:df:2e:70:2a
wlo1: send auth to ac:f1:df:2e:70:2a (try 1/3)
wlo1: authenticated
wlo1: associate with ac:f1:df:2e:70:2a (try 1/3)
wlo1: RX AssocResp from ac:f1:df:2e:70:2a (capab=0x431 status=0 aid=3)
wlo1: associated
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlo1: authenticate with ac:f1:df:2e:70:2a
wlo1: send auth to ac:f1:df:2e:70:2a (try 1/3)
wlo1: send auth to ac:f1:df:2e:70:2a (try 2/3)
wlo1: send auth to ac:f1:df:2e:70:2a (try 3/3)
wlo1: authentication with ac:f1:df:2e:70:2a timed out
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
r8169 0000:03:00.0 eno1: link down
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
wlo1: authenticate with ac:f1:df:2e:70:2a
wlo1: send auth to ac:f1:df:2e:70:2a (try 1/3)
wlo1: authenticated
wlo1: associate with ac:f1:df:2e:70:2a (try 1/3)
wlo1: RX AssocResp from ac:f1:df:2e:70:2a (capab=0x431 status=0 aid=7)
wlo1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlo1: authenticate with ac:f1:df:2e:70:2a
wlo1: send auth to ac:f1:df:2e:70:2a (try 1/3)
wlo1: send auth to ac:f1:df:2e:70:2a (try 2/3)
wlo1: send auth to ac:f1:df:2e:70:2a (try 3/3)
wlo1: authentication with ac:f1:df:2e:70:2a timed out
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
wlo1: authenticate with 14:da:e9:ba:82:fc
wlo1: send auth to 14:da:e9:ba:82:fc (try 1/3)
wlo1: authenticated
wlo1: associate with 14:da:e9:ba:82:fc (try 1/3)
wlo1: RX AssocResp from 14:da:e9:ba:82:fc (capab=0x411 status=0 aid=2)
wlo1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
cfg80211: Regulatory domain changed to country: RU
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5730000 KHz @ 40000 KHz), (N/A, 3000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
IPv6: wlo1: IPv6 duplicate address fe80::c69b:f005:ed0e:bbf5 detected!
IPv6: wlo1: IPv6 duplicate address fe80::6a9e:659e:4c43:c086 detected!
IPv6: wlo1: IPv6 duplicate address fe80::744b:b18e:26fc:80aa detected!
wlo1: deauthenticating from 14:da:e9:ba:82:fc by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
r8169 0000:03:00.0 eno1: link down
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
wlo1: authenticate with 14:da:e9:ba:82:fc
wlo1: send auth to 14:da:e9:ba:82:fc (try 1/3)
wlo1: authenticated
wlo1: associate with 14:da:e9:ba:82:fc (try 1/3)
wlo1: RX AssocResp from 14:da:e9:ba:82:fc (capab=0x411 status=0 aid=2)
wlo1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
cfg80211: Regulatory domain changed to country: RU
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5730000 KHz @ 40000 KHz), (N/A, 3000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
IPv6: wlo1: IPv6 duplicate address fe80::c69b:f005:ed0e:bbf5 detected!
IPv6: wlo1: IPv6 duplicate address fe80::6a9e:659e:4c43:c086 detected!
IPv6: wlo1: IPv6 duplicate address fe80::744b:b18e:26fc:80aa detected!
wlo1: deauthenticating from 14:da:e9:ba:82:fc by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.372 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
i8042 aux 00:03: System wakeup disabled by ACPI
i8042 kbd 00:02: System wakeup enabled by ACPI
sd 0:0:0:0: [sda] Stopping disk
[drm] probing gen 2 caps for device 1022:1412 = 700d01/6
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 1024M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88003e164c00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88003e164c04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88003e164c08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88003e164c0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88003e164c10
radeon 0000:01:00.0: VCE init error (-22).
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
PM: suspend of devices complete after 3508.620 msecs
PM: late suspend of devices complete after 0.827 msecs
r8169 0000:03:00.0: System wakeup enabled by ACPI
ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
ohci-pci 0000:00:13.0: System wakeup enabled by ACPI
ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
ohci-pci 0000:00:12.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:10.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 15.058 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 17
Broke affinity for irq 31
Broke affinity for irq 33
smpboot: CPU 1 is now offline
Broke affinity for irq 17
Broke affinity for irq 30
Broke affinity for irq 31
Broke affinity for irq 33
smpboot: CPU 2 is now offline
Broke affinity for irq 1
Broke affinity for irq 9
Broke affinity for irq 12
Broke affinity for irq 17
Broke affinity for irq 24
Broke affinity for irq 30
Broke affinity for irq 31
Broke affinity for irq 33
Broke affinity for irq 34
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
LVT offset 0 assigned for vector 0x400
[Firmware Bug]: cpu 0, try to use APIC500 (LVT offset 0) for vector 0xf9, but the register is already in use for vector 0x400 on another cpu
[Firmware Bug]: cpu 0, failed to setup threshold interrupt for bank 4, block 0 (MSR00000413=0xc000000001000000)
[Firmware Bug]: cpu 0, try to use APIC500 (LVT offset 0) for vector 0xf9, but the register is already in use for vector 0x400 on another cpu
[Firmware Bug]: cpu 0, failed to setup threshold interrupt for bank 4, block 1 (MSRC0000408=0xc000000001000000)
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x11
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x12
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x13
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ohci-pci 0000:00:12.0: System wakeup disabled by ACPI
ohci-pci 0000:00:13.0: System wakeup disabled by ACPI
ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
xhci_hcd 0000:00:10.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 19.406 msecs
PM: early resume of devices complete after 0.470 msecs
r8169 0000:03:00.0: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
[drm] PCIE GART of 1024M enabled (table at 0x00000000002E8000).
radeon 0000:00:01.0: WB enabled
radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000030000c00 and cpu addr 0xffff88003f1a6c00
radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90001835a18
radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000030000c18 and cpu addr 0xffff88003f1a6c18
radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000030000c1c and cpu addr 0xffff88003f1a6c1c
radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000030000c04 and cpu addr 0xffff88003f1a6c04
radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000030000c08 and cpu addr 0xffff88003f1a6c08
radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000030000c0c and cpu addr 0xffff88003f1a6c0c
radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000030000c10 and cpu addr 0xffff88003f1a6c10
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ring test on 5 succeeded in 1 usecs
pciehp 0000:00:02.0:pcie04: Device 0000:01:00.0 already exists at 0000:01:00, cannot hot-add
pciehp 0000:00:02.0:pcie04: Cannot add device at 0000:01:00
[drm] UVD initialized successfully.
[drm] ring test on 6 succeeded in 10 usecs
[drm] ring test on 7 succeeded in 4 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
usb 2-4: reset high-speed USB device number 2 using ehci-pci
[drm] ib test on ring 5 succeeded
r8169 0000:03:00.0 eno1: link down
ata4: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
rtc_cmos 00:01: System wakeup disabled by ACPI
i8042 kbd 00:02: System wakeup disabled by ACPI
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] probing gen 2 caps for device 1022:1412 = 700d01/6
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
psmouse serio1: synaptics: queried max coordinates: x [..5696], y [..4884]
psmouse serio1: synaptics: queried min coordinates: x [1276..], y [1044..]
[drm] PCIE GART of 1024M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88003e164c00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88003e164c04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88003e164c08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88003e164c0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88003e164c10
radeon 0000:01:00.0: VCE init error (-22).
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
PM: resume of devices complete after 2026.797 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
r8169 0000:03:00.0 eno1: link down
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
wlo1: authenticate with 14:da:e9:ba:82:fc
wlo1: send auth to 14:da:e9:ba:82:fc (try 1/3)
wlo1: authenticated
wlo1: associate with 14:da:e9:ba:82:fc (try 1/3)
wlo1: RX AssocResp from 14:da:e9:ba:82:fc (capab=0x411 status=0 aid=2)
wlo1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
cfg80211: Regulatory domain changed to country: RU
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5730000 KHz @ 40000 KHz), (N/A, 3000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
IPv6: wlo1: IPv6 duplicate address fe80::c69b:f005:ed0e:bbf5 detected!
IPv6: wlo1: IPv6 duplicate address fe80::6a9e:659e:4c43:c086 detected!
perf interrupt took too long (5009 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
wlo1: authenticate with c0:4a:00:b9:d5:5e
wlo1: send auth to c0:4a:00:b9:d5:5e (try 1/3)
wlo1: authenticated
wlo1: associate with c0:4a:00:b9:d5:5e (try 1/3)
wlo1: RX AssocResp from c0:4a:00:b9:d5:5e (capab=0x431 status=0 aid=2)
wlo1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
cfg80211: Regulatory domain changed to country: RU
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5730000 KHz @ 40000 KHz), (N/A, 3000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
wlo1: authenticate with ac:f1:df:2e:70:2a
wlo1: send auth to ac:f1:df:2e:70:2a (try 1/3)
wlo1: authenticated
wlo1: associate with ac:f1:df:2e:70:2a (try 1/3)
wlo1: RX AssocResp from ac:f1:df:2e:70:2a (capab=0x431 status=0 aid=14)
wlo1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
usb 6-1: new SuperSpeed USB device number 2 using xhci_hcd
usb 6-1: New USB device found, idVendor=8564, idProduct=1000
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-1: Product: Mass Storage Device
usb 6-1: Manufacturer: JetFlash
usb 6-1: SerialNumber: 845861698
usb-storage 6-1:1.0: USB Mass Storage device detected
scsi host4: usb-storage 6-1:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 4:0:0:0: Direct-Access JetFlash Transcend 16GB 1.00 PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdb] 30871552 512-byte logical blocks: (15.8 GB/14.7 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 4:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
sdb: sdb1
sd 4:0:0:0: [sdb] Attached SCSI removable disk
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 6-1: USB disconnect, device number 2
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlo1: authenticate with ac:f1:df:2e:70:2a
wlo1: send auth to ac:f1:df:2e:70:2a (try 1/3)
wlo1: authenticated
wlo1: associate with ac:f1:df:2e:70:2a (try 1/3)
wlo1: RX AssocResp from ac:f1:df:2e:70:2a (capab=0x431 status=0 aid=13)
wlo1: associated
wlo1: deauthenticating from ac:f1:df:2e:70:2a by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.003 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
i8042 aux 00:03: System wakeup disabled by ACPI
i8042 kbd 00:02: System wakeup enabled by ACPI
sd 0:0:0:0: [sda] Stopping disk
[drm] probing gen 2 caps for device 1022:1412 = 700d01/6
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 1024M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88003e164c00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88003e164c04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88003e164c08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88003e164c0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88003e164c10
radeon 0000:01:00.0: VCE init error (-22).
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
PM: suspend of devices complete after 2935.728 msecs
PM: late suspend of devices complete after 0.993 msecs
r8169 0000:03:00.0: System wakeup enabled by ACPI
ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
ohci-pci 0000:00:13.0: System wakeup enabled by ACPI
ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
xhci_hcd 0000:00:10.0: System wakeup enabled by ACPI
ohci-pci 0000:00:12.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 14.798 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 17
Broke affinity for irq 25
Broke affinity for irq 30
Broke affinity for irq 31
smpboot: CPU 1 is now offline
Broke affinity for irq 17
Broke affinity for irq 25
Broke affinity for irq 30
Broke affinity for irq 31
Broke affinity for irq 34
smpboot: CPU 2 is now offline
Broke affinity for irq 1
Broke affinity for irq 9
Broke affinity for irq 12
Broke affinity for irq 17
Broke affinity for irq 18
Broke affinity for irq 24
Broke affinity for irq 25
Broke affinity for irq 30
Broke affinity for irq 31
Broke affinity for irq 33
Broke affinity for irq 34
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
LVT offset 0 assigned for vector 0x400
[Firmware Bug]: cpu 0, try to use APIC500 (LVT offset 0) for vector 0xf9, but the register is already in use for vector 0x400 on another cpu
[Firmware Bug]: cpu 0, failed to setup threshold interrupt for bank 4, block 0 (MSR00000413=0xc000000001000000)
[Firmware Bug]: cpu 0, try to use APIC500 (LVT offset 0) for vector 0xf9, but the register is already in use for vector 0x400 on another cpu
[Firmware Bug]: cpu 0, failed to setup threshold interrupt for bank 4, block 1 (MSRC0000408=0xc000000001000000)
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x11
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x12
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x13
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ohci-pci 0000:00:12.0: System wakeup disabled by ACPI
ohci-pci 0000:00:13.0: System wakeup disabled by ACPI
ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
xhci_hcd 0000:00:10.0: System wakeup disabled by ACPI
ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 16.743 msecs
PM: early resume of devices complete after 0.459 msecs
r8169 0000:03:00.0: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
[drm] PCIE GART of 1024M enabled (table at 0x00000000002E8000).
radeon 0000:00:01.0: WB enabled
radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000030000c00 and cpu addr 0xffff88003f1a6c00
radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90001835a18
radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000030000c18 and cpu addr 0xffff88003f1a6c18
radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000030000c1c and cpu addr 0xffff88003f1a6c1c
radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000030000c04 and cpu addr 0xffff88003f1a6c04
radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000030000c08 and cpu addr 0xffff88003f1a6c08
radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000030000c0c and cpu addr 0xffff88003f1a6c0c
radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000030000c10 and cpu addr 0xffff88003f1a6c10
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ring test on 5 succeeded in 1 usecs
pciehp 0000:00:02.0:pcie04: Device 0000:01:00.0 already exists at 0000:01:00, cannot hot-add
pciehp 0000:00:02.0:pcie04: Cannot add device at 0000:01:00
[drm] UVD initialized successfully.
[drm] ring test on 6 succeeded in 9 usecs
[drm] ring test on 7 succeeded in 3 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
r8169 0000:03:00.0 eno1: link down
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
usb 2-4: reset high-speed USB device number 2 using ehci-pci
[drm] ib test on ring 5 succeeded
ata4: SATA link down (SStatus 0 SControl 300)
rtc_cmos 00:01: System wakeup disabled by ACPI
i8042 kbd 00:02: System wakeup disabled by ACPI
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] probing gen 2 caps for device 1022:1412 = 700d01/6
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
psmouse serio1: synaptics: queried max coordinates: x [..5696], y [..4884]
psmouse serio1: synaptics: queried min coordinates: x [1276..], y [1044..]
[drm] PCIE GART of 1024M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88003e164c00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88003e164c04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88003e164c08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88003e164c0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88003e164c10
radeon 0000:01:00.0: VCE init error (-22).
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
PM: resume of devices complete after 2125.010 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
r8169 0000:03:00.0 eno1: link down
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
wlo1: authenticate with 14:da:e9:ba:82:fc
wlo1: send auth to 14:da:e9:ba:82:fc (try 1/3)
wlo1: authenticated
wlo1: associate with 14:da:e9:ba:82:fc (try 1/3)
wlo1: RX AssocResp from 14:da:e9:ba:82:fc (capab=0x411 status=0 aid=3)
wlo1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
cfg80211: Regulatory domain changed to country: RU
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5730000 KHz @ 40000 KHz), (N/A, 3000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
IPv6: wlo1: IPv6 duplicate address fe80::c69b:f005:ed0e:bbf5 detected!
IPv6: wlo1: IPv6 duplicate address fe80::6a9e:659e:4c43:c086 detected!
IPv6: wlo1: IPv6 duplicate address fe80::744b:b18e:26fc:80aa detected!
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.