dmesg - 6700Kat4500Mhz_512GB_Intel_ssd6
microcode: microcode updated early to revision 0x9e, date = 2016-06-22
Linux version 4.8.0-27-generic (buildd@lgw01-11) (gcc version 6.2.0 20161005 (Ubuntu 6.2.0-5ubuntu12) ) #29-Ubuntu SMP Thu Oct 20 21:03:13 UTC 2016 (Ubuntu 4.8.0-27.29-generic 4.8.1)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000009676afff] usable
BIOS-e820: [mem 0x000000009676b000-0x000000009676bfff] ACPI NVS
BIOS-e820: [mem 0x000000009676c000-0x00000000967b5fff] reserved
BIOS-e820: [mem 0x00000000967b6000-0x00000000967fbfff] usable
BIOS-e820: [mem 0x00000000967fc000-0x000000009730cfff] reserved
BIOS-e820: [mem 0x000000009730d000-0x000000009c9affff] usable
BIOS-e820: [mem 0x000000009c9b0000-0x000000009e0cffff] reserved
BIOS-e820: [mem 0x000000009e0d0000-0x000000009e109fff] ACPI data
BIOS-e820: [mem 0x000000009e10a000-0x000000009ec96fff] ACPI NVS
BIOS-e820: [mem 0x000000009ec97000-0x000000009fa93fff] reserved
BIOS-e820: [mem 0x000000009fa94000-0x000000009fafefff] type 20
BIOS-e820: [mem 0x000000009faff000-0x000000009fafffff] usable
BIOS-e820: [mem 0x000000009fb00000-0x000000009fbfffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000085effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.40 by American Megatrends
efi: ESRT=0x9f9d9e18 ACPI=0x9e0db000 ACPI 2.0=0x9e0db000 SMBIOS=0xf05b0 SMBIOS 3.0=0x9f9d7000 MPS=0xfcaa0
esrt: Reserving ESRT space from 0x000000009f9d9e18 to 0x000000009f9d9e50.
SMBIOS 3.0.0 present.
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x85f000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00A0000000 mask 7FE0000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x9fb00 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcf10-0x000fcf1f] mapped at [ffff9d62000fcf10]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff9d6200096000] 96000 size 24576
Using GB pages for direct mapping
BRK [0x42a651000, 0x42a651fff] PGTABLE
BRK [0x42a652000, 0x42a652fff] PGTABLE
BRK [0x42a653000, 0x42a653fff] PGTABLE
BRK [0x42a654000, 0x42a654fff] PGTABLE
BRK [0x42a655000, 0x42a655fff] PGTABLE
BRK [0x42a656000, 0x42a656fff] PGTABLE
BRK [0x42a657000, 0x42a657fff] PGTABLE
BRK [0x42a658000, 0x42a658fff] PGTABLE
BRK [0x42a659000, 0x42a659fff] PGTABLE
BRK [0x42a65a000, 0x42a65afff] PGTABLE
RAMDISK: [mem 0x322aa000-0x3514cfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000009E0DB000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000009E0DB0A0 0000B4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000009E0FE8C0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000009E0DB1E8 0236D7 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x000000009EC96F80 000040
ACPI: APIC 0x000000009E0FE9D0 0000BC (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000009E0FEA90 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000009E0FEAD8 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000009E0FEB78 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x000000009E0FEBB8 000038 (v01 ALASKA A M I 01072009 AMI. 0005000B)
ACPI: SSDT 0x000000009E0FEBF0 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
ACPI: LPIT 0x000000009E0FEF60 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
ACPI: SSDT 0x000000009E0FEFF8 000248 (v02 INTEL sensrhub 00000000 INTL 20120913)
ACPI: SSDT 0x000000009E0FF240 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913)
ACPI: SSDT 0x000000009E101DF0 000BE3 (v02 INTEL Ther_Rvp 00001000 INTL 20120913)
ACPI: SSDT 0x000000009E1029D8 00002B (v02 INTEL UsbCTabl 00001000 INTL 20120913)
ACPI: DBGP 0x000000009E102A08 000034 (v01 INTEL 00000000 MSFT 0000005F)
ACPI: DBG2 0x000000009E102A40 000054 (v00 INTEL 00000000 MSFT 0000005F)
ACPI: SSDT 0x000000009E102A98 0006FD (v02 INTEL xh_rvp08 00000000 INTL 20120913)
ACPI: SSDT 0x000000009E103198 0052EA (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
ACPI: UEFI 0x000000009E108488 000042 (v01 00000000 00000000)
ACPI: SSDT 0x000000009E1084D0 000E58 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000085effffff]
NODE_DATA(0) allocated [mem 0x85effb000-0x85effffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000085effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000009676afff]
node 0: [mem 0x00000000967b6000-0x00000000967fbfff]
node 0: [mem 0x000000009730d000-0x000000009c9affff]
node 0: [mem 0x000000009faff000-0x000000009fafffff]
node 0: [mem 0x0000000100000000-0x000000085effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000085effffff]
On node 0 totalpages: 8367602
DMA zone: 64 pages used for memmap
DMA zone: 26 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 9914 pages used for memmap
DMA32 zone: 634453 pages, LIFO batch:31
Normal zone: 120768 pages used for memmap
Normal zone: 7729152 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x9676b000-0x9676bfff]
PM: Registered nosave memory: [mem 0x9676c000-0x967b5fff]
PM: Registered nosave memory: [mem 0x967fc000-0x9730cfff]
PM: Registered nosave memory: [mem 0x9c9b0000-0x9e0cffff]
PM: Registered nosave memory: [mem 0x9e0d0000-0x9e109fff]
PM: Registered nosave memory: [mem 0x9e10a000-0x9ec96fff]
PM: Registered nosave memory: [mem 0x9ec97000-0x9fa93fff]
PM: Registered nosave memory: [mem 0x9fa94000-0x9fafefff]
PM: Registered nosave memory: [mem 0x9fb00000-0x9fbfffff]
PM: Registered nosave memory: [mem 0x9fc00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x9fc00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff9d6a5ec00000 s107544 r8192 d31720 u262144
pcpu-alloc: s107544 r8192 d31720 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 8236830
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32692464K/33470408K available (8847K kernel code, 1427K rwdata, 3804K rodata, 1548K init, 1400K bss, 777944K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:2048 16
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: Detected 4000.000 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 8016.00 BogoMIPS (lpj=16032000)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160422
ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20160422/dswload-210)
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20160422/psobject-227)
ACPI Exception: AE_NOT_FOUND, (SSDT:xh_rvp08) while loading table (20160422/tbxfload-227)
ACPI Error: 1 table load failures, 8 successful (20160422/tbxfload-247)
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 32K (ffffffff84ce9000 - ffffffff84cf1000)
ftrace: allocating 33403 entries in 131 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: Max logical packages: 2
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz (family: 0x6, model: 0x5e, stepping: 0x3)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (64128.00 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x9676b000-0x9676bfff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x9e10a000-0x9ec96fff] (12111872 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 19:40:26, date: 11/19/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 24 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9D6A3A56C800 0007AA (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9D6A3A564C00 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9D6A3A56B800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9D6A3A5FA600 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xa0000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:01.1: [8086:1905] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdf830000-0xdf83ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdf84d000-0xdf84dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xdf848000-0xdf849fff]
pci 0000:00:17.0: reg 0x14: [mem 0xdf84c000-0xdf84c0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:17.0: reg 0x24: [mem 0xdf84b000-0xdf84b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1b.0: [8086:a167] type 01 class 0x060400
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:a112] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:a114] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:a116] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:a145] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdf844000-0xdf847fff]
pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xdf840000-0xdf843fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdf820000-0xdf82ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.3: System wakeup disabled by ACPI
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdf84a000-0xdf84a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xdf800000-0xdf81ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.6: System wakeup disabled by ACPI
pci 0000:01:00.0: [10de:1187] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd8000000-0xd9ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xdf080000-0xdf083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
pci 0000:02:00.0: [8086:f1a5] type 00 class 0x010802
pci 0000:02:00.0: reg 0x10: [mem 0xdf700000-0xdf703fff 64bit]
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:01.1: bridge window [mem 0xdf700000-0xdf7fffff]
pci 0000:00:1b.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [1b21:1242] type 00 class 0x0c0330
pci 0000:04:00.0: reg 0x10: [mem 0xdf600000-0xdf607fff 64bit]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: bridge window [mem 0xdf600000-0xdf6fffff]
pci 0000:05:00.0: [1b21:1187] type 01 class 0x060400
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 05-0c]
pci 0000:00:1c.2: bridge window [io 0xb000-0xcfff]
pci 0000:00:1c.2: bridge window [mem 0xdf100000-0xdf2fffff]
pci 0000:06:01.0: [1b21:1187] type 01 class 0x060400
pci 0000:06:01.0: PME# supported from D0 D3hot D3cold
pci 0000:06:03.0: [1b21:1187] type 01 class 0x060400
pci 0000:06:03.0: PME# supported from D0 D3hot D3cold
pci 0000:06:04.0: [1b21:1187] type 01 class 0x060400
pci 0000:06:04.0: PME# supported from D0 D3hot D3cold
pci 0000:06:05.0: [1b21:1187] type 01 class 0x060400
pci 0000:06:05.0: PME# supported from D0 D3hot D3cold
pci 0000:06:06.0: [1b21:1187] type 01 class 0x060400
pci 0000:06:06.0: PME# supported from D0 D3hot D3cold
pci 0000:06:07.0: [1b21:1187] type 01 class 0x060400
pci 0000:06:07.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: PCI bridge to [bus 06-0c]
pci 0000:05:00.0: bridge window [io 0xb000-0xcfff]
pci 0000:05:00.0: bridge window [mem 0xdf100000-0xdf2fffff]
pci 0000:06:01.0: PCI bridge to [bus 07]
pci 0000:08:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:08:00.0: reg 0x10: [io 0xc050-0xc057]
pci 0000:08:00.0: reg 0x14: [io 0xc040-0xc043]
pci 0000:08:00.0: reg 0x18: [io 0xc030-0xc037]
pci 0000:08:00.0: reg 0x1c: [io 0xc020-0xc023]
pci 0000:08:00.0: reg 0x20: [io 0xc000-0xc01f]
pci 0000:08:00.0: reg 0x24: [mem 0xdf200000-0xdf2001ff]
pci 0000:06:03.0: PCI bridge to [bus 08]
pci 0000:06:03.0: bridge window [io 0xc000-0xcfff]
pci 0000:06:03.0: bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:06:04.0: PCI bridge to [bus 09]
pci 0000:06:05.0: PCI bridge to [bus 0a]
pci 0000:0b:00.0: [8086:1539] type 00 class 0x020000
pci 0000:0b:00.0: reg 0x10: [mem 0xdf100000-0xdf11ffff]
pci 0000:0b:00.0: reg 0x18: [io 0xb000-0xb01f]
pci 0000:0b:00.0: reg 0x1c: [mem 0xdf120000-0xdf123fff]
pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:06.0: PCI bridge to [bus 0b]
pci 0000:06:06.0: bridge window [io 0xb000-0xbfff]
pci 0000:06:06.0: bridge window [mem 0xdf100000-0xdf1fffff]
pci 0000:06:07.0: PCI bridge to [bus 0c]
pci 0000:0d:00.0: [1b21:1242] type 00 class 0x0c0330
pci 0000:0d:00.0: reg 0x10: [mem 0xdf500000-0xdf507fff 64bit]
pci 0000:0d:00.0: PME# supported from D3hot D3cold
pci 0000:0d:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 0d]
pci 0000:00:1c.4: bridge window [mem 0xdf500000-0xdf5fffff]
pci 0000:0e:00.0: [1b21:1242] type 00 class 0x0c0330
pci 0000:0e:00.0: reg 0x10: [mem 0xdf400000-0xdf407fff 64bit]
pci 0000:0e:00.0: PME# supported from D3hot D3cold
pci 0000:0e:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.6: PCI bridge to [bus 0e]
pci 0000:00:1c.6: bridge window [mem 0xdf400000-0xdf4fffff]
pci 0000:0f:00.0: [144d:a802] type 00 class 0x010802
pci 0000:0f:00.0: reg 0x10: [mem 0xdf310000-0xdf313fff 64bit]
pci 0000:0f:00.0: reg 0x18: [io 0xd000-0xd0ff]
pci 0000:0f:00.0: reg 0x30: [mem 0xdf300000-0xdf30ffff pref]
pci 0000:0f:00.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: PCI bridge to [bus 0f]
pci 0000:00:1d.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1d.0: bridge window [mem 0xdf300000-0xdf3fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15)
ACPI: Enabled 6 GPEs in block 00 to 7F
ACPI : EC: EC stopped
ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
ACPI : EC: EC started
SCSI subsystem initialized
libata version 3.00 loaded.
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x9676b000-0x97ffffff]
e820: reserve RAM buffer [mem 0x967fc000-0x97ffffff]
e820: reserve RAM buffer [mem 0x9c9b0000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9fb00000-0x9fffffff]
e820: reserve RAM buffer [mem 0x85f000000-0x85fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0290-0x029f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x1800-0x18fe] has been reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0800-0x087f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x1854-0x1857] has been reserved
system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: [mem 0xdffc0000-0xdffdffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0xfe00-0xfefe] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1b.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
pci 0000:00:1b.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1b.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1b.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1b.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1b.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1b.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1b.0: BAR 14: assigned [mem 0xa0000000-0xa01fffff]
pci 0000:00:1b.0: BAR 15: assigned [mem 0xa0200000-0xa03fffff 64bit pref]
pci 0000:00:1b.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:01.1: bridge window [mem 0xdf700000-0xdf7fffff]
pci 0000:00:1b.0: PCI bridge to [bus 03]
pci 0000:00:1b.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1b.0: bridge window [mem 0xa0000000-0xa01fffff]
pci 0000:00:1b.0: bridge window [mem 0xa0200000-0xa03fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: bridge window [mem 0xdf600000-0xdf6fffff]
pci 0000:06:01.0: PCI bridge to [bus 07]
pci 0000:06:03.0: PCI bridge to [bus 08]
pci 0000:06:03.0: bridge window [io 0xc000-0xcfff]
pci 0000:06:03.0: bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:06:04.0: PCI bridge to [bus 09]
pci 0000:06:05.0: PCI bridge to [bus 0a]
pci 0000:06:06.0: PCI bridge to [bus 0b]
pci 0000:06:06.0: bridge window [io 0xb000-0xbfff]
pci 0000:06:06.0: bridge window [mem 0xdf100000-0xdf1fffff]
pci 0000:06:07.0: PCI bridge to [bus 0c]
pci 0000:05:00.0: PCI bridge to [bus 06-0c]
pci 0000:05:00.0: bridge window [io 0xb000-0xcfff]
pci 0000:05:00.0: bridge window [mem 0xdf100000-0xdf2fffff]
pci 0000:00:1c.2: PCI bridge to [bus 05-0c]
pci 0000:00:1c.2: bridge window [io 0xb000-0xcfff]
pci 0000:00:1c.2: bridge window [mem 0xdf100000-0xdf2fffff]
pci 0000:00:1c.4: PCI bridge to [bus 0d]
pci 0000:00:1c.4: bridge window [mem 0xdf500000-0xdf5fffff]
pci 0000:00:1c.6: PCI bridge to [bus 0e]
pci 0000:00:1c.6: bridge window [mem 0xdf400000-0xdf4fffff]
pci 0000:00:1d.0: PCI bridge to [bus 0f]
pci 0000:00:1d.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1d.0: bridge window [mem 0xdf300000-0xdf3fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xa0000000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd9ffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xdf700000-0xdf7fffff]
pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0xa0000000-0xa01fffff]
pci_bus 0000:03: resource 2 [mem 0xa0200000-0xa03fffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xdf600000-0xdf6fffff]
pci_bus 0000:05: resource 0 [io 0xb000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xdf100000-0xdf2fffff]
pci_bus 0000:06: resource 0 [io 0xb000-0xcfff]
pci_bus 0000:06: resource 1 [mem 0xdf100000-0xdf2fffff]
pci_bus 0000:08: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:08: resource 1 [mem 0xdf200000-0xdf2fffff]
pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:0b: resource 1 [mem 0xdf100000-0xdf1fffff]
pci_bus 0000:0d: resource 1 [mem 0xdf500000-0xdf5fffff]
pci_bus 0000:0e: resource 1 [mem 0xdf400000-0xdf4fffff]
pci_bus 0000:0f: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:0f: resource 1 [mem 0xdf300000-0xdf3fffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 47756K (ffff9d62322aa000 - ffff9d623514d000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x90760000-0x94760000] (64MB) mapped at [ffff9d6290760000-ffff9d629475ffff]
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1479584426.764:1): initialized
Initialise system trusted keyrings
workingset: timestamp_bits=40 max_order=23 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.25)
Key type big_key registered
Allocating IMA blacklist keyring.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
aer 0000:00:1c.0:pcie002: service driver aer loaded
aer 0000:00:1c.2:pcie002: service driver aer loaded
aer 0000:00:1c.4:pcie002: service driver aer loaded
aer 0000:00:1c.6:pcie002: service driver aer loaded
aer 0000:00:1d.0:pcie002: service driver aer loaded
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded
pcieport 0000:00:01.1: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.1:pcie001: service driver pcie_pme loaded
pcieport 0000:00:1b.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1b.0:pcie001: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pcieport 0000:05:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:06:01.0: Signaling PME through PCIe PME interrupt
pcieport 0000:06:03.0: Signaling PME through PCIe PME interrupt
pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:06:04.0: Signaling PME through PCIe PME interrupt
pcieport 0000:06:05.0: Signaling PME through PCIe PME interrupt
pcieport 0000:06:06.0: Signaling PME through PCIe PME interrupt
pci 0000:0b:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:06:07.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie001: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:0d:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie001: service driver pcie_pme loaded
pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
pci 0000:0e:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.6:pcie001: service driver pcie_pme loaded
pcieport 0000:00:1d.0: Signaling PME through PCIe PME interrupt
pci 0000:0f:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1d.0:pcie001: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1b.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
pciehp 0000:00:1b.0:pcie004: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xd9000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x142120
intel_idle: v0.4.1 model 0x5E
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.8.0-27-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.8.0-27-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:04:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.8.0-27-generic xhci-hcd
usb usb3: SerialNumber: 0000:04:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.8.0-27-generic xhci-hcd
usb usb4: SerialNumber: 0000:04:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:0d:00.0: xHCI Host Controller
xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:0d:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.8.0-27-generic xhci-hcd
usb usb5: SerialNumber: 0000:0d:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:0d:00.0: xHCI Host Controller
xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.8.0-27-generic xhci-hcd
usb usb6: SerialNumber: 0000:0d:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xhci_hcd 0000:0e:00.0: xHCI Host Controller
xhci_hcd 0000:0e:00.0: new USB bus registered, assigned bus number 7
xhci_hcd 0000:0e:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 4.8.0-27-generic xhci-hcd
usb usb7: SerialNumber: 0000:0e:00.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
xhci_hcd 0000:0e:00.0: xHCI Host Controller
xhci_hcd 0000:0e:00.0: new USB bus registered, assigned bus number 8
usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 4.8.0-27-generic xhci-hcd
usb usb8: SerialNumber: 0000:0e:00.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0x506e3, pf=0x2, revision=0x9e
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 53215c7b458776554ca2158e042cc68ec4a8874b'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 8:607:698
pcie_pme 0000:00:01.0:pcie001: hash matches
rtc_cmos 00:03: setting system clock to 2016-11-19 19:40:27 UTC (1479584427)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1548K (ffffffff84b66000 - ffffffff84ce9000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1376K (ffff9d6629ca8000 - ffff9d6629e00000)
Freeing unused kernel memory: 292K (ffff9d662a1b7000 - ffff9d662a200000)
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
hidraw: raw HID events driver (C) Jiri Kosina
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvme nvme0: pci function 0000:02:00.0
nvme nvme1: pci function 0000:0f:00.0
ahci 0000:00:17.0: version 3.0
nvidia: module verification failed: signature and/or required key missing - tainting kernel
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
nvidia-nvlink: Nvlink Core is being initialized, major device number 244
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 367.57 Mon Oct 3 20:37:01 PDT 2016
PTP clock support registered
dca service started, version 1.12.1
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[drm] Initialized drm 1.1.0 20060810
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 367.57 Mon Oct 3 20:32:57 PDT 2016
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
pps pps0: new PPS source ptp0
igb 0000:0b:00.0: added PHC on eth0
igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:0b:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 9c:5c:8e:6e:d1:53
igb 0000:0b:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:0b:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
igb 0000:0b:00.0 enp11s0: renamed from eth0
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xdf84b000 port 0xdf84b100 irq 162
ata2: SATA max UDMA/133 abar m2048@0xdf84b000 port 0xdf84b180 irq 162
ata3: SATA max UDMA/133 abar m2048@0xdf84b000 port 0xdf84b200 irq 162
ata4: SATA max UDMA/133 abar m2048@0xdf84b000 port 0xdf84b280 irq 162
ata5: SATA max UDMA/133 abar m2048@0xdf84b000 port 0xdf84b300 irq 162
ata6: SATA max UDMA/133 abar m2048@0xdf84b000 port 0xdf84b380 irq 162
ahci 0000:08:00.0: SSS flag set, parallel bus scan disabled
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
ahci 0000:08:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:08:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc
scsi host6: ahci
scsi host7: ahci
ata7: SATA max UDMA/133 abar m512@0xdf200000 port 0xdf200100 irq 17
ata8: SATA max UDMA/133 abar m512@0xdf200000 port 0xdf200180 irq 17
nvme1n1: p1 p2 p3 p4
usb 6-2: new SuperSpeed USB device number 2 using xhci_hcd
nvme0n1: p1 p2 p3 p4
usb 6-2: New USB device found, idVendor=0451, idProduct=8140
usb 6-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 6-2:1.0: USB hub found
hub 6-2:1.0: 4 ports detected
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
ata2: SATA link down (SStatus 4 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 4 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: NCQ Send/Recv Log not supported
ata6.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0CB6Q, max UDMA/133
ata6.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata6.00: supports DRM functions and may not be fully accessible
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 9c:5c:8e:6e:d1:32
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
ata6.00: NCQ Send/Recv Log not supported
ata6.00: configured for UDMA/133
e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
ata4.00: ATA-9: INTEL SSDSC2CT180A4, 335u, max UDMA/133
ata4.00: 351651888 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
usb 5-1: new high-speed USB device number 2 using xhci_hcd
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA INTEL SSDSC2CT18 335u PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: [sda] 351651888 512-byte logical blocks: (180 GB/168 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
scsi 5:0:0:0: Direct-Access ATA Samsung SSD 840 CB6Q PQ: 0 ANSI: 5
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 3:0:0:0: [sda] Attached SCSI disk
sd 5:0:0:0: Attached scsi generic sg1 type 0
sd 5:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 5:0:0:0: [sdb] Attached SCSI disk
usb 5-1: New USB device found, idVendor=2109, idProduct=2811
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: USB2.0 Hub
usb 5-1: Manufacturer: VIA Labs, Inc.
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 4 ports detected
tsc: Refined TSC clocksource calibration: 4008.001 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39c5e2eb0a9, max_idle_ns: 440795289533 ns
usb 6-2.1: new SuperSpeed USB device number 3 using xhci_hcd
usb 6-2.1: New USB device found, idVendor=8564, idProduct=4000
usb 6-2.1: New USB device strings: Mfr=3, Product=4, SerialNumber=5
usb 6-2.1: Product: Transcend
usb 6-2.1: Manufacturer: TS-RDF8
usb 6-2.1: SerialNumber: 000000082
usb-storage 6-2.1:1.0: USB Mass Storage device detected
scsi host8: usb-storage 6-2.1:1.0
scsi host8: runtime PM trying to activate child device host8 but parent (6-2.1:1.0) is not active
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
ata8: SATA link down (SStatus 0 SControl 300)
random: fast init done
usb 5-2: new high-speed USB device number 3 using xhci_hcd
usb 5-2: New USB device found, idVendor=0451, idProduct=8142
usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 5-2: SerialNumber: 860500811AE5
hub 5-2:1.0: USB hub found
hub 5-2:1.0: 4 ports detected
EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: (null)
usb 6-2.4: new SuperSpeed USB device number 4 using xhci_hcd
usb 6-2.4: New USB device found, idVendor=0451, idProduct=8140
usb 6-2.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 6-2.4:1.0: USB hub found
hub 6-2.4:1.0: 2 ports detected
usb 5-1.1: new full-speed USB device number 4 using xhci_hcd
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Created slice User and Session Slice.
usb 5-2.2: new full-speed USB device number 5 using xhci_hcd
usb 5-1.1: New USB device found, idVendor=045e, idProduct=07a5
usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1.1: Product: Microsoft® 2.4GHz Transceiver v9.0
usb 5-1.1: Manufacturer: Microsoft
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (nvme0n1p3): re-mounted. Opts: errors=remount-ro
systemd-journald[352]: Received request to flush runtime journal from PID 1
clocksource: Switched to clocksource tsc
wmi: Mapper loaded
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol BCM registered
Bluetooth: HCI UART protocol QCA registered
Bluetooth: HCI UART protocol AG6XX registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 240
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
Adding 33470460k swap on /dev/nvme0n1p4. Priority:-1 extents:1 across:33470460k SSFS
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
random: crng init done
scsi 8:0:0:0: Direct-Access Generic STORAGE DEVICE TS26 PQ: 0 ANSI: 6
scsi 8:0:0:1: Direct-Access Generic STORAGE DEVICE TS26 PQ: 0 ANSI: 6
scsi 8:0:0:2: Direct-Access Generic STORAGE DEVICE TS26 PQ: 0 ANSI: 6
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input14
asus_wmi: Number of fans: 1
sd 8:0:0:0: Attached scsi generic sg2 type 0
sd 8:0:0:1: Attached scsi generic sg3 type 0
sd 8:0:0:2: Attached scsi generic sg4 type 0
sd 8:0:0:0: [sdc] Attached SCSI removable disk
usb 5-2.2: New USB device found, idVendor=046d, idProduct=c318
usb 5-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2.2: Product: Logitech Illuminated Keyboard
usb 5-2.2: Manufacturer: Logitech
sd 8:0:0:1: [sdd] Attached SCSI removable disk
sd 8:0:0:2: [sde] Attached SCSI removable disk
usb 5-1.2: new low-speed USB device number 6 using xhci_hcd
usb 5-1.2: New USB device found, idVendor=046d, idProduct=c069
usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1.2: Product: USB Laser Mouse
usb 5-1.2: Manufacturer: Logitech
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Microsoft Microsoft® 2.4GHz Transceiver v9.0 as /devices/pci0000:00/0000:00:1c.4/0000:0d:00.0/usb5/5-1/5-1.1/5-1.1:1.0/0003:045E:07A5.0001/input/input15
usb 5-2.4: new high-speed USB device number 7 using xhci_hcd
hid-generic 0003:045E:07A5.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v9.0] on usb-0000:0d:00.0-1.1/input0
input: Microsoft Microsoft® 2.4GHz Transceiver v9.0 as /devices/pci0000:00/0000:00:1c.4/0000:0d:00.0/usb5/5-1/5-1.1/5-1.1:1.1/0003:045E:07A5.0002/input/input16
hid-generic 0003:045E:07A5.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v9.0] on usb-0000:0d:00.0-1.1/input1
input: Microsoft Microsoft® 2.4GHz Transceiver v9.0 as /devices/pci0000:00/0000:00:1c.4/0000:0d:00.0/usb5/5-1/5-1.1/5-1.1:1.2/0003:045E:07A5.0003/input/input17
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
hid-generic 0003:045E:07A5.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v9.0] on usb-0000:0d:00.0-1.1/input2
input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1c.4/0000:0d:00.0/usb5/5-2/5-2.2/5-2.2:1.0/0003:046D:C318.0004/input/input18
usb 5-2.4: New USB device found, idVendor=0451, idProduct=8142
usb 5-2.4: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 5-2.4: SerialNumber: 560508511AE5
hub 5-2.4:1.0: USB hub found
hub 5-2.4:1.0: 2 ports detected
hid-generic 0003:046D:C318.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:0d:00.0-2.2/input0
input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1c.4/0000:0d:00.0/usb5/5-2/5-2.2/5-2.2:1.1/0003:046D:C318.0005/input/input19
audit: type=1400 audit(1479584429.898:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="unity8-dash" pid=819 comm="apparmor_parser"
audit: type=1400 audit(1479584429.898:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="udm-extractor" pid=824 comm="apparmor_parser"
audit: type=1400 audit(1479584429.898:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=816 comm="apparmor_parser"
audit: type=1400 audit(1479584429.898:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=816 comm="apparmor_parser"
audit: type=1400 audit(1479584429.898:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=816 comm="apparmor_parser"
audit: type=1400 audit(1479584429.898:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=816 comm="apparmor_parser"
audit: type=1400 audit(1479584429.898:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=815 comm="apparmor_parser"
audit: type=1400 audit(1479584429.898:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=815 comm="apparmor_parser"
audit: type=1400 audit(1479584429.898:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=825 comm="apparmor_parser"
hid-generic 0003:046D:C318.0005: input,hiddev0,hidraw4: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:0d:00.0-2.2/input1
input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1c.4/0000:0d:00.0/usb5/5-1/5-1.2/5-1.2:1.0/0003:046D:C069.0006/input/input20
hid-generic 0003:046D:C069.0006: input,hidraw5: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:0d:00.0-1.2/input0
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input23
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input24
cgroup: new mount options do not match the existing superblock, will be ignored
IPv6: ADDRCONF(NETDEV_UP): enp11s0: link is not ready
nvidia-modeset: Allocated GPU:0 (GPU-c724a541-9180-00ca-0737-484b4142a459) @ PCI:0000:01:00.0
IPv6: ADDRCONF(NETDEV_UP): enp11s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 1
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic left promiscuous mode
virbr0: port 1(virbr0-nic) entered disabled state
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
igb 0000:0b:00.0 enp11s0: igb: enp11s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): enp11s0: link becomes ready
systemd[1]: apt-daily.timer: Adding 11h 40min 21.455216s random time.
systemd[1]: apt-daily.timer: Adding 11h 20min 17.533501s random time.