dmesg - lame
Linux version 4.8.0-rc8-amd64 (debian-kernel@lists.debian.org) (gcc version 5.4.1 20160904 (Debian 5.4.1-2) ) #1 SMP Debian 4.8~rc8-1~exp1 (2016-09-26)
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000097fff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bfd9ffff] usable
BIOS-e820: [mem 0x00000000bfda0000-0x00000000bfdd0fff] ACPI NVS
BIOS-e820: [mem 0x00000000bfdd1000-0x00000000bfdfffff] ACPI data
BIOS-e820: [mem 0x00000000bfe00000-0x00000000bfefffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000083effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. GA-990XA-UD3/GA-990XA-UD3, BIOS F14e 09/09/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x83f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000BFE00000 mask FFFFFFE00000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000083f000000 aka 33776M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xbfe00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbfda0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f4be0-0x000f4bef] mapped at [ffff8dd6c00f4be0]
Base memory trampoline at [ffff8dd6c0092000] 92000 size 24576
Using GB pages for direct mapping
BRK [0x49f56b000, 0x49f56bfff] PGTABLE
BRK [0x49f56c000, 0x49f56cfff] PGTABLE
BRK [0x49f56d000, 0x49f56dfff] PGTABLE
BRK [0x49f56e000, 0x49f56efff] PGTABLE
BRK [0x49f56f000, 0x49f56ffff] PGTABLE
BRK [0x49f570000, 0x49f570fff] PGTABLE
BRK [0x49f571000, 0x49f571fff] PGTABLE
RAMDISK: [mem 0x357c9000-0x36bdbfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F6B00 000014 (v00 GBT )
ACPI: RSDT 0x00000000BFDD1000 000050 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 0x00000000BFDD1080 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 0x00000000BFDD1100 007A4B (v01 GBT GBTUACPI 00001000 MSFT 03000000)
ACPI: FACS 0x00000000BFDA0000 000040
ACPI: MSDM 0x00000000BFDD8C40 000055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: HPET 0x00000000BFDD8CC0 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 0x00000000BFDD8D00 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: EUDS 0x00000000BFDD8D80 000740 (v01 GBT 00000000 00000000)
ACPI: MATS 0x00000000BFDD94C0 000034 (v01 GBT 00000000 00000000)
ACPI: TAMG 0x00000000BFDD9530 000182 (v01 GBT GBT B0 5455312E BG?? 53450101)
ACPI: APIC 0x00000000BFDD8B80 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: MATS 0x00000000BFDD96C0 006209 (v01 MATS RCM 80000001 INTL 20061109)
ACPI: SSDT 0x00000000BFDDF940 001714 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: IVRS 0x00000000BFDE10D0 0000D0 (v01 AMD RD890S 00202031 AMD 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000083effffff]
NODE_DATA(0) allocated [mem 0x83effb000-0x83effffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000083effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000097fff]
node 0: [mem 0x0000000000100000-0x00000000bfd9ffff]
node 0: [mem 0x0000000100000000-0x000000083effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000083effffff]
On node 0 totalpages: 8383799
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3991 pages, LIFO batch:0
DMA32 zone: 12215 pages used for memmap
DMA32 zone: 781728 pages, LIFO batch:31
Normal zone: 118720 pages used for memmap
Normal zone: 7598080 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00098000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbfda0000-0xbfdd0fff]
PM: Registered nosave memory: [mem 0xbfdd1000-0xbfdfffff]
PM: Registered nosave memory: [mem 0xbfe00000-0xbfefffff]
PM: Registered nosave memory: [mem 0xbff00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xbff00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 35 pages/cpu @ffff8ddefec00000 s103384 r8192 d31784 u262144
pcpu-alloc: s103384 r8192 d31784 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 8252779
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0xb4000000-0xb5ffffff] (32MB)
Aperture pointing to e820 RAM. Ignoring.
AGP: Your BIOS doesn't leave an aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
Memory: 32843496K/33535196K available (6083K kernel code, 1165K rwdata, 2824K rodata, 1368K init, 928K bss, 691700K reserved, 0K cma-reserved)
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:33024 nr_irqs:488 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 4227.876 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 8455.75 BogoMIPS (lpj=16911504)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160422
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: disabled by default; enable with sysctl kernel.yama.*
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Freeing SMP alternatives memory: 24K (ffffffff9747b000 - ffffffff97481000)
ftrace: allocating 24978 entries in 98 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: Max logical packages: 2
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD FX-8370 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (67649.39 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xbfda0000-0xbfdd0fff] (200704 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xff00-0xff07]
pci 0000:00:11.0: reg 0x14: [io 0xfe00-0xfe03]
pci 0000:00:11.0: reg 0x18: [io 0xfd00-0xfd07]
pci 0000:00:11.0: reg 0x1c: [io 0xfc00-0xfc03]
pci 0000:00:11.0: reg 0x20: [io 0xfb00-0xfb0f]
pci 0000:00:11.0: reg 0x24: [mem 0xfdfff000-0xfdfff3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfdffe000-0xfdffefff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfdffd000-0xfdffd0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfdffc000-0xfdffcfff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfdffb000-0xfdffb0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfdff4000-0xfdff7fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfdffa000-0xfdffafff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfdff9000-0xfdff9fff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfdff8000-0xfdff80ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:00.0: [10de:13c2] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xde000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xbf00-0xbf7f]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:01:00.1: [10de:0fbb] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfcffc000-0xfcffffff]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [1b6f:7023] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xfd9f8000-0xfd9fffff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
pci 0000:00:04.0: bridge window [mem 0xfd900000-0xfd9fffff]
pci 0000:00:04.0: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xde00-0xdeff]
pci 0000:03:00.0: reg 0x18: [mem 0xfdeff000-0xfdefffff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xfdef8000-0xfdefbfff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PCI bridge to [bus 03]
pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:09.0: bridge window [mem 0xfd500000-0xfd5fffff]
pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
pci 0000:04:00.0: [1b6f:7023] type 00 class 0x0c0330
pci 0000:04:00.0: reg 0x10: [mem 0xfddf8000-0xfddfffff 64bit]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PCI bridge to [bus 04]
pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:0a.0: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
pci 0000:05:0e.0: [1106:3044] type 00 class 0x0c0010
pci 0000:05:0e.0: reg 0x10: [mem 0xfdbff000-0xfdbff7ff]
pci 0000:05:0e.0: reg 0x14: [io 0xaf00-0xaf7f]
pci 0000:05:0e.0: supports D2
pci 0000:05:0e.0: PME# supported from D2 D3hot D3cold
pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
pci 0000:00:15.0: PCI bridge to [bus 06]
pci 0000:00:15.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:15.0: bridge window [mem 0xfd800000-0xfd8fffff]
pci 0000:00:15.0: bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00098000-0x0009ffff]
e820: reserve RAM buffer [mem 0xbfda0000-0xbfffffff]
e820: reserve RAM buffer [mem 0x83f000000-0x83fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0220-0x0225] has been reserved
system 00:00: [io 0x0290-0x0294] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
system 00:01: [io 0x0900-0x091f] has been reserved
system 00:01: [io 0x0228-0x022f] has been reserved
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c52] has been reserved
system 00:01: [io 0x0c6c-0x0c6d] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cdf] has been reserved
system 00:01: [io 0x0800-0x08fe] has been reserved
system 00:01: [io 0x0a10-0x0a17] has been reserved
system 00:01: [io 0x0b00-0x0b0f] has been reserved
system 00:01: [io 0x0b10-0x0b1f] has been reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0x000d5c00-0x000d7fff] has been reserved
system 00:05: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:05: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:05: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:05: [mem 0xbfda0000-0xbfdfffff] could not be reserved
system 00:05: [mem 0xffff0000-0xffffffff] has been reserved
system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:05: [mem 0x00100000-0xbfd9ffff] could not be reserved
system 00:05: [mem 0xbfe00000-0xbfefffff] has been reserved
system 00:05: [mem 0xbff00000-0xbfffffff] could not be reserved
system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:05: [mem 0xfee00000-0xfee00fff] could not be reserved
system 00:05: [mem 0xfff80000-0xfffeffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc07ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
pci 0000:00:04.0: bridge window [mem 0xfd900000-0xfd9fffff]
pci 0000:00:04.0: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
pci 0000:00:09.0: PCI bridge to [bus 03]
pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:09.0: bridge window [mem 0xfd500000-0xfd5fffff]
pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
pci 0000:00:0a.0: PCI bridge to [bus 04]
pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:0a.0: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 05]
pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
pci 0000:00:15.0: PCI bridge to [bus 06]
pci 0000:00:15.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:15.0: bridge window [mem 0xfd800000-0xfd8fffff]
pci 0000:00:15.0: bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff window]
pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfd900000-0xfd9fffff]
pci_bus 0000:02: resource 2 [mem 0xfd600000-0xfd6fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfd500000-0xfd5fffff]
pci_bus 0000:03: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xfdd00000-0xfddfffff]
pci_bus 0000:04: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
pci_bus 0000:05: resource 1 [mem 0xfdb00000-0xfdbfffff]
pci_bus 0000:05: resource 2 [mem 0xfda00000-0xfdafffff pref]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:05: resource 8 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:05: resource 9 [mem 0xc0000000-0xfebfffff window]
pci_bus 0000:06: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:06: resource 1 [mem 0xfd800000-0xfd8fffff]
pci_bus 0000:06: resource 2 [mem 0xfd700000-0xfd7fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 20556K (ffff8dd6f57c9000 - ffff8dd6f6bdc000)
pci 0000:00:00.2: can't derive routing for PCI INT A
pci 0000:00:00.2: PCI INT A: no GSI
iommu: Adding device 0000:00:00.0 to group 0
iommu: Adding device 0000:00:02.0 to group 1
iommu: Adding device 0000:00:04.0 to group 2
iommu: Adding device 0000:00:09.0 to group 3
iommu: Adding device 0000:00:0a.0 to group 4
iommu: Adding device 0000:00:11.0 to group 5
iommu: Adding device 0000:00:12.0 to group 6
iommu: Adding device 0000:00:12.2 to group 6
iommu: Adding device 0000:00:13.0 to group 7
iommu: Adding device 0000:00:13.2 to group 7
iommu: Adding device 0000:00:14.0 to group 8
iommu: Adding device 0000:00:14.2 to group 9
iommu: Adding device 0000:00:14.3 to group 10
iommu: Adding device 0000:00:14.4 to group 11
iommu: Adding device 0000:00:14.5 to group 12
iommu: Adding device 0000:00:15.0 to group 13
iommu: Adding device 0000:00:16.0 to group 14
iommu: Adding device 0000:00:16.2 to group 14
iommu: Adding device 0000:01:00.0 to group 15
iommu: Adding device 0000:01:00.1 to group 15
iommu: Adding device 0000:02:00.0 to group 16
iommu: Adding device 0000:03:00.0 to group 17
iommu: Adding device 0000:04:00.0 to group 18
iommu: Adding device 0000:05:0e.0 to group 11
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Interrupt remapping enabled
AMD-Vi: Lazy IO/TLB flushing enabled
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1477139321.820:1): initialized
Initialise system trusted keyrings
workingset: timestamp_bits=40 max_order=23 bucket_order=0
zbud: loaded
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
GHES: HEST is not enabled!
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
i8042: If AUX port is really absent please use the 'i8042.noaux' option
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
microcode: microcode updated early to new patch_level=0x0600084f
microcode: CPU0: patch_level=0x0600084f
microcode: CPU1: patch_level=0x0600084f
microcode: CPU2: patch_level=0x0600084f
microcode: CPU3: patch_level=0x0600084f
microcode: CPU4: patch_level=0x0600084f
microcode: CPU5: patch_level=0x0600084f
microcode: CPU6: patch_level=0x0600084f
microcode: CPU7: patch_level=0x0600084f
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
zswap: loaded using pool lzo/zbud
rtc_cmos 00:02: setting system clock to 2016-10-22 12:28:44 UTC (1477139324)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1368K (ffffffff97325000 - ffffffff9747b000)
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 44K (ffff8ddb5edf5000 - ffff8ddb5ee00000)
Freeing unused kernel memory: 1272K (ffff8ddb5f0c2000 - ffff8ddb5f200000)
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
Floppy drive(s): fd0 is unknown type 13 (usb?)
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc33a4313a000, 50:e5:49:c8:30:2c, XID 0c900800 IRQ 25
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfdffd000
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
libata version 3.00 loaded.
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.8.0-rc8-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:02:00.0: hcc params 0x040050af hci version 0x100 quirks 0x00080490
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.8.0-rc8-amd64 xhci-hcd
usb usb2: SerialNumber: 0000:02:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:13.2: irq 17, io mem 0xfdffb000
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.8.0-rc8-amd64 xhci-hcd
usb usb4: SerialNumber: 0000:02:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 4.8.0-rc8-amd64 ehci_hcd
usb usb3: SerialNumber: 0000:00:13.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:04:00.0: hcc params 0x040050af hci version 0x100 quirks 0x00080490
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.8.0-rc8-amd64 xhci-hcd
usb usb5: SerialNumber: 0000:04:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 6
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfdff8000
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 7
usb usb7: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 4.8.0-rc8-amd64 xhci-hcd
usb usb7: SerialNumber: 0000:04:00.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: EHCI Host Controller
usb usb6: Manufacturer: Linux 4.8.0-rc8-amd64 ehci_hcd
usb usb6: SerialNumber: 0000:00:16.2
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
ohci-pci: OHCI PCI platform driver
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff280 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff300 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff380 irq 19
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 8
ohci-pci 0000:00:12.0: irq 18, io mem 0xfdffe000
firewire_ohci 0000:05:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: OHCI PCI host controller
usb usb8: Manufacturer: Linux 4.8.0-rc8-amd64 ohci_hcd
usb usb8: SerialNumber: 0000:00:12.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9
ohci-pci 0000:00:13.0: irq 18, io mem 0xfdffc000
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: OHCI PCI host controller
usb usb9: Manufacturer: Linux 4.8.0-rc8-amd64 ohci_hcd
usb usb9: SerialNumber: 0000:00:13.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10
ohci-pci 0000:00:14.5: irq 18, io mem 0xfdffa000
usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: OHCI PCI host controller
usb usb10: Manufacturer: Linux 4.8.0-rc8-amd64 ohci_hcd
usb usb10: SerialNumber: 0000:00:14.5
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11
ohci-pci 0000:00:16.0: irq 18, io mem 0xfdff9000
usb usb11: New USB device found, idVendor=1d6b, idProduct=0001
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: OHCI PCI host controller
usb usb11: Manufacturer: Linux 4.8.0-rc8-amd64 ohci_hcd
usb usb11: SerialNumber: 0000:00:16.0
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 4 ports detected
usb 2-2: new high-speed USB device number 2 using xhci_hcd
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
tsc: Refined TSC clocksource calibration: 4228.214 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3cf27e0872e, max_idle_ns: 440795247106 ns
usb 6-2: new high-speed USB device number 3 using ehci-pci
usb 2-2: New USB device found, idVendor=2109, idProduct=2812
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: USB2.0 Hub
usb 2-2: Manufacturer: VIA Labs, Inc.
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 4 ports detected
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: ATA-9: WDC WD30EZRZ-00Z5HB0, 80.00A80, max UDMA/133
ata4.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
ata3.00: ATA-8: TOSHIBA DT01ACA300, MX6OABB0, max UDMA/133
ata3.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
ata1.00: ATA-8: OCZ-AGILITY3, 2.25, max UDMA/133
ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: ATA-8: OCZ-VERTEX3, 2.28.20, max UDMA/133
ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA OCZ-AGILITY3 2.25 PQ: 0 ANSI: 5
ata2.00: configured for UDMA/133
usb 8-3: new low-speed USB device number 2 using ohci-pci
scsi 1:0:0:0: Direct-Access ATA OCZ-VERTEX3 .20 PQ: 0 ANSI: 5
usb 6-2: New USB device found, idVendor=1a40, idProduct=0101
usb 6-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 6-2: Product: USB 2.0 Hub
hub 6-2:1.0: USB hub found
hub 6-2:1.0: 4 ports detected
firewire_core 0000:05:0e.0: created device fw0: GUID 0049e55019130700, S400
usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
scsi 2:0:0:0: Direct-Access ATA TOSHIBA DT01ACA3 ABB0 PQ: 0 ANSI: 5
usb 11-1: new low-speed USB device number 2 using ohci-pci
scsi 3:0:0:0: Direct-Access ATA WDC WD30EZRZ-00Z 0A80 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.9 GiB)
sd 2:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
sd 1:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/224 GiB)
sd 3:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
sd 3:0:0:0: [sdd] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdc] 4096-byte physical blocks
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
usb 8-3: New USB device found, idVendor=0c45, idProduct=7403
usb 8-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 8-3: Product: RF-Dongle
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: RF-Dongle as /devices/pci0000:00/0000:00:12.0/usb8/8-3/8-3:1.0/0003:0C45:7403.0001/input/input1
usb 11-1: New USB device found, idVendor=046d, idProduct=c626
usb 11-1: New USB device strings: Mfr=3, Product=1, SerialNumber=0
usb 11-1: Product: SpaceNavigator
usb 11-1: Manufacturer: 3Dconnexion
usb 4-2: New USB device found, idVendor=2109, idProduct=0812
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: USB3.0 Hub
usb 4-2: Manufacturer: VIA Labs, Inc.
hub 4-2:1.0: USB hub found
hub 4-2:1.0: 4 ports detected
hid-generic 0003:0C45:7403.0001: input,hidraw0: USB HID v1.00 Keyboard [RF-Dongle] on usb-0000:00:12.0-3/input0
input: RF-Dongle as /devices/pci0000:00/0000:00:12.0/usb8/8-3/8-3:1.1/0003:0C45:7403.0002/input/input2
hid-generic 0003:0C45:7403.0002: input,hidraw1: USB HID v1.00 Mouse [RF-Dongle] on usb-0000:00:12.0-3/input1
usb 6-2.1: new full-speed USB device number 5 using ehci-pci
logitech 0003:046D:C626.0003: fixing up rel/abs in Logitech report descriptor
usb 6-2.1: New USB device found, idVendor=0a5c, idProduct=21e8
usb 6-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-2.1: Product: BCM920702 Bluetooth 4.0
usb 6-2.1: Manufacturer: Broadcom Corp
usb 6-2.1: SerialNumber: 5CF37075BE33
input: 3Dconnexion SpaceNavigator as /devices/pci0000:00/0000:00:16.0/usb11/11-1/11-1:1.0/0003:046D:C626.0003/input/input3
logitech 0003:046D:C626.0003: input,hidraw2: USB HID v1.10 Multi-Axis Controller [3Dconnexion SpaceNavigator] on usb-0000:00:16.0-1/input0
usb 6-4: new high-speed USB device number 6 using ehci-pci
usb 11-3: new full-speed USB device number 3 using ohci-pci
sdd: sdd1
sd 3:0:0:0: [sdd] Attached SCSI disk
usb 6-4: New USB device found, idVendor=0bda, idProduct=2838
usb 6-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-4: Product: RTL2838UHIDIR
usb 6-4: Manufacturer: Realtek
usb 6-4: SerialNumber: 00000001
random: fast init done
usb 6-2.3: new low-speed USB device number 7 using ehci-pci
clocksource: Switched to clocksource tsc
usb 11-3: New USB device found, idVendor=28de, idProduct=1142
usb 11-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 11-3: Product: Steam Controller
usb 11-3: Manufacturer: Valve Software
input: Valve Software Steam Controller as /devices/pci0000:00/0000:00:16.0/usb11/11-3/11-3:1.0/0003:28DE:1142.0004/input/input4
hid-generic 0003:28DE:1142.0004: input,hidraw3: USB HID v1.11 Keyboard [Valve Software Steam Controller] on usb-0000:00:16.0-3/input0
usb 6-2.3: New USB device found, idVendor=0603, idProduct=0002
usb 6-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2.3: Product: USB Composite Device
usb 6-2.3: Manufacturer: SINO WEALTH
hid-generic 0003:28DE:1142.0005: hiddev0,hidraw4: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:16.0-3/input1
input: SINO WEALTH USB Composite Device as /devices/pci0000:00/0000:00:16.2/usb6/6-2/6-2.3/6-2.3:1.0/0003:0603:0002.0006/input/input5
hid-generic 0003:28DE:1142.0007: hiddev0,hidraw5: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:16.0-3/input2
hid-generic 0003:28DE:1142.0008: hiddev0,hidraw6: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:16.0-3/input3
hid-generic 0003:28DE:1142.0009: hiddev0,hidraw7: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:16.0-3/input4
hid-generic 0003:0603:0002.0006: input,hidraw8: USB HID v1.10 Keyboard [SINO WEALTH USB Composite Device] on usb-0000:00:16.2-2.3/input0
input: SINO WEALTH USB Composite Device as /devices/pci0000:00/0000:00:16.2/usb6/6-2/6-2.3/6-2.3:1.1/0003:0603:0002.000A/input/input6
hid-generic 0003:0603:0002.000A: input,hiddev0,hidraw9: USB HID v1.10 Mouse [SINO WEALTH USB Composite Device] on usb-0000:00:16.2-2.3/input1
usb 6-2.4: new high-speed USB device number 8 using ehci-pci
usb 6-2.4: New USB device found, idVendor=058f, idProduct=6366
usb 6-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-2.4: Product: Flash Card Reader/Writer
usb 6-2.4: Manufacturer: Generic
usb 6-2.4: SerialNumber: 058F63666438
usb-storage 6-2.4:1.0: USB Mass Storage device detected
scsi host6: usb-storage 6-2.4:1.0
scsi host6: runtime PM trying to activate child device host6 but parent (6-2.4:1.0) is not active
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 6:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0
sd 6:0:0:0: [sde] Attached SCSI removable disk
floppy0: no floppy controllers found
md: linear personality registered for level -1
md: multipath personality registered for level -4
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
raid6: sse2x1 gen() 7299 MB/s
raid6: sse2x1 xor() 5210 MB/s
raid6: sse2x2 gen() 11611 MB/s
raid6: sse2x2 xor() 7313 MB/s
raid6: sse2x4 gen() 13382 MB/s
raid6: sse2x4 xor() 6705 MB/s
raid6: using algorithm sse2x4 gen() 13382 MB/s
raid6: .... xor() 6705 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 4863.000 MB/sec
async_tx: api initialized (async)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
Btrfs loaded, crc32c=crc32c-intel
BTRFS: device label datab devid 1 transid 216 /dev/sdd1
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: avahi-daemon.socket: Cannot add dependency job, ignoring: Unit avahi-daemon.socket is masked.
systemd[1]: docker.socket: Cannot add dependency job, ignoring: Unit docker.socket is masked.
systemd[1]: minetest-server.service: Cannot add dependency job, ignoring: Unit minetest-server.service is masked.
systemd[1]: bzflag.service: Cannot add dependency job, ignoring: Unit bzflag.service is masked.
systemd[1]: avahi-daemon.service: Cannot add dependency job, ignoring: Unit avahi-daemon.service is masked.
systemd[1]: mysql.service: Cannot add dependency job, ignoring: Unit mysql.service is masked.
systemd[1]: clamav-freshclam.service: Cannot add dependency job, ignoring: Unit clamav-freshclam.service is masked.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
it87: Found IT8720F chip at 0x228, revision 8
it87: Routing internal VCCH to in7
it87: Beeping is supported
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[371]: Received request to flush runtime journal from PID 1
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
nvidia-nvlink: Nvlink Core is being initialized, major device number 248
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 367.44 Wed Aug 17 22:24:07 PDT 2016
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 367.44 Wed Aug 17 21:54:40 PDT 2016
[drm] Initialized drm 1.1.0 20060810
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
ACPI: Power Button [PWRF]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
wmi: Mapper loaded
acpi_cpufreq: overriding BIOS provided _PSD data
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
Floppy drive(s): fd0 is unknown type 13 (usb?)
ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20160422/utaddress-255)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 6:0:0:0: Attached scsi generic sg4 type 0
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision ID: 0x42
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xffffc33a436aeb00). heartbeat=60 sec (nowayout=0)
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
input: PC Speaker as /devices/platform/pcspkr/input/input9
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC889: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
BTRFS info (device sdd1): disk space caching is enabled
BTRFS info (device sdd1): has skinny extents
random: crng init done
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
usb 6-4: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
Bluetooth: hci0: BCM: chip id 63
usb 6-4: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (Realtek RTL2832U reference design)
i2c i2c-0: Added multiplexed i2c bus 1
rtl2832 0-0010: Realtek RTL2832 successfully attached
usb 6-4: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))...
r820t 1-001a: creating new instance
Bluetooth: hci0: ChromeLinux_C7EA
Bluetooth: hci0: BCM20702A1 (001.002.014) build 1338
r820t 1-001a: Rafael Micro r820t successfully identified
bluetooth hci0: firmware: direct-loading firmware brcm/BCM20702A1-0a5c-21e8.hcd
media: Linux media interface: v0.10
Linux video capture interface: v2.00
rtl2832_sdr rtl2832_sdr.0.auto: Registered as swradio0
rtl2832_sdr rtl2832_sdr.0.auto: Realtek RTL2832 SDR attached
rtl2832_sdr rtl2832_sdr.0.auto: SDR API is still slightly experimental and functionality changes may follow
Registered IR keymap rc-empty
input: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:16.2/usb6/6-4/rc/rc0/input18
rc rc0: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:16.2/usb6/6-4/rc/rc0
usb 6-4: dvb_usb_v2: schedule remote query interval to 200 msecs
lirc_dev: IR Remote Control driver registered, major 245
rc rc0: lirc_dev: driver ir-lirc-codec (dvb_usb_rtl28xxu) registered at minor = 0
IR LIRC bridge handler initialized
usb 6-4: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected
usbcore: registered new interface driver dvb_usb_rtl28xxu
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input19
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input20
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input21
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input22
Process accounting resumed
r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw
Bluetooth: hci0: BCM20702A1 (001.002.014) build 1338
Bluetooth: hci0: Broadcom Bluetooth Device
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
NET: Registered protocol family 4
NET: Registered protocol family 3
NET: Registered protocol family 5
nvidia-modeset: Allocated GPU:0 (GPU-318e370a-326d-e5c1-d515-a1711d9861f0) @ PCI:0000:01:00.0
floppy0: no floppy controllers found
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
fuse init (API version 7.25)
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
vboxdrv: Found 8 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 4228292245 Hz
vboxdrv: Successfully loaded version 5.1.8 (interface 0x00280000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU found
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
input: 80:60:07:5B:E9:03 as /devices/virtual/input/input23
Netfilter messages via NETLINK v0.30.
device eth0 entered promiscuous mode