dmesg - 1

Return To 1 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-22-generic (buildd@lcy01-08) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #40~14.04.1-Ubuntu SMP Fri May 13 17:27:45 UTC 2016 (Ubuntu 4.4.0-22.40~14.04.1-generic 4.4.8)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
tseg: 007f000000
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007d04ffff] usable
BIOS-e820: [mem 0x000000007d050000-0x000000007d07ffff] reserved
BIOS-e820: [mem 0x000000007d080000-0x000000007d342fff] usable
BIOS-e820: [mem 0x000000007d343000-0x000000007d410fff] ACPI NVS
BIOS-e820: [mem 0x000000007d411000-0x000000007e1d3fff] reserved
BIOS-e820: [mem 0x000000007e1d4000-0x000000007e1d4fff] usable
BIOS-e820: [mem 0x000000007e1d5000-0x000000007e3dafff] ACPI NVS
BIOS-e820: [mem 0x000000007e3db000-0x000000007e850fff] usable
BIOS-e820: [mem 0x000000007e851000-0x000000007efe1fff] reserved
BIOS-e820: [mem 0x000000007efe2000-0x000000007effffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A88X-D3H, BIOS F6 04/09/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF write-through
  C0000-CFFFF write-protect
  D0000-E7FFF uncachable
  E8000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 disabled
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 000000023f000000 aka 9200M
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
e820: update [mem 0x80000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x7f000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd6f0-0x000fd6ff] mapped at [ffff8800000fd6f0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0x02002000, 0x02002fff] PGTABLE
BRK [0x02003000, 0x02003fff] PGTABLE
BRK [0x02004000, 0x02004fff] PGTABLE
BRK [0x02005000, 0x02005fff] PGTABLE
BRK [0x02006000, 0x02006fff] PGTABLE
BRK [0x02007000, 0x02007fff] PGTABLE
RAMDISK: [mem 0x342e8000-0x3616bfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x000000007D3C7080 00007C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x000000007D3CD6B0 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150930/tbfadt-654)
ACPI: DSDT 0x000000007D3C7190 00651C (v02 ALASKA A M I    00000088 INTL 20051117)
ACPI: FACS 0x000000007D406080 000040
ACPI: APIC 0x000000007D3CD7C0 00007E (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x000000007D3CD840 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: MCFG 0x000000007D3CD888 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
ACPI: HPET 0x000000007D3CD8C8 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
ACPI: WDRT 0x000000007D3CD900 000047 (v01 ALASKA A M I    01072009 AMI  00000005)
ACPI: SSDT 0x000000007D3CD948 000B9C (v01 AMD    BANTRY   00000001 AMD  00000001)
ACPI: SSDT 0x000000007D3CE4E8 00033B (v02 AMD    BANTRY   00000002 MSFT 04000000)
ACPI: CRAT 0x000000007D3CE828 000550 (v01 AMD    BANTRY   00000001 AMD  00000001)
ACPI: SSDT 0x000000007D3CED78 0016E2 (v01 AMD    CPMCMN   00000001 INTL 20051117)
ACPI: SSDT 0x000000007D3D0460 001519 (v01 AMD    CPMDFIGP 00000001 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023effffff]
NODE_DATA(0) allocated [mem 0x23eff6000-0x23effafff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000023effffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009dfff]
  node   0: [mem 0x0000000000100000-0x000000007d04ffff]
  node   0: [mem 0x000000007d080000-0x000000007d342fff]
  node   0: [mem 0x000000007e1d4000-0x000000007e1d4fff]
  node   0: [mem 0x000000007e3db000-0x000000007e850fff]
  node   0: [mem 0x000000007efe2000-0x000000007effffff]
  node   0: [mem 0x0000000100000000-0x000000023effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000023effffff]
On node 0 totalpages: 1820485
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3997 pages, LIFO batch:0
  DMA32 zone: 7967 pages used for memmap
  DMA32 zone: 509864 pages, LIFO batch:31
  Normal zone: 20416 pages used for memmap
  Normal zone: 1306624 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 1, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x7d050000-0x7d07ffff]
PM: Registered nosave memory: [mem 0x7d343000-0x7d410fff]
PM: Registered nosave memory: [mem 0x7d411000-0x7e1d3fff]
PM: Registered nosave memory: [mem 0x7e1d5000-0x7e3dafff]
PM: Registered nosave memory: [mem 0x7e851000-0x7efe1fff]
PM: Registered nosave memory: [mem 0x7f000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfeb7ffff]
PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x7f000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88023ec00000 s98008 r8192 d28968 u524288
pcpu-alloc: s98008 r8192 d28968 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1792017
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7052632K/7281940K available (8146K kernel code, 1287K rwdata, 3940K rodata, 1484K init, 1292K bss, 229308K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 64.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:1000 16
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3693.386 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7386.77 BogoMIPS (lpj=14773544)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 5 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff81eb6000 - ffffffff81ebd000)
ftrace: allocating 31939 entries in 125 pages
smpboot: Max logical packages: 2
smpboot: APIC(10) Converting physical 1 to logical package 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A10-7850K Radeon R7, 12 Compute Cores 4C+8G (family: 0x15, model: 0x30, stepping: 0x1)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      6
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (29547.08 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x7d343000-0x7d410fff] (843776 bytes)
PM: Registering ACPI NVS region [mem 0x7e1d5000-0x7e3dafff] (2121728 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 10:49:55, date: 10/21/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfed3ffff window]
pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1422] type 00 class 0x060000
pci 0000:00:01.0: [1002:130f] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:01.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
pci 0000:00:01.0: reg 0x20: [io  0xf000-0xf0ff]
pci 0000:00:01.0: reg 0x24: [mem 0xfeb00000-0xfeb3ffff]
pci 0000:00:01.0: reg 0x30: [mem 0xfeb40000-0xfeb5ffff pref]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.0: PME# supported from D1 D2 D3hot
pci 0000:00:01.1: [1002:1308] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xfeb64000-0xfeb67fff 64bit]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:02.0: [1022:1424] type 00 class 0x060000
pci 0000:00:03.0: [1022:1424] type 00 class 0x060000
pci 0000:00:03.1: [1022:1426] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.1: System wakeup disabled by ACPI
pci 0000:00:04.0: [1022:1424] type 00 class 0x060000
pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xfeb6a000-0xfeb6bfff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:10.1: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.1: reg 0x10: [mem 0xfeb68000-0xfeb69fff 64bit]
pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
pci 0000:00:10.1: System wakeup disabled by ACPI
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io  0xf140-0xf147]
pci 0000:00:11.0: reg 0x14: [io  0xf130-0xf133]
pci 0000:00:11.0: reg 0x18: [io  0xf120-0xf127]
pci 0000:00:11.0: reg 0x1c: [io  0xf110-0xf113]
pci 0000:00:11.0: reg 0x20: [io  0xf100-0xf10f]
pci 0000:00:11.0: reg 0x24: [mem 0xfeb71000-0xfeb717ff]
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfeb70000-0xfeb70fff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfeb6f000-0xfeb6f0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfeb6e000-0xfeb6efff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfeb6d000-0xfeb6d0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfeb60000-0xfeb63fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfeb6c000-0xfeb6cfff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:141a] type 00 class 0x060000
pci 0000:00:18.1: [1022:141b] type 00 class 0x060000
pci 0000:00:18.2: [1022:141c] type 00 class 0x060000
pci 0000:00:18.3: [1022:141d] type 00 class 0x060000
pci 0000:00:18.4: [1022:141e] type 00 class 0x060000
pci 0000:00:18.5: [1022:141f] type 00 class 0x060000
pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [io  0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x18: [mem 0xfea00000-0xfea00fff 64bit]
pci 0000:01:00.0: reg 0x20: [mem 0xd0800000-0xd0803fff 64bit pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.1: PCI bridge to [bus 01]
pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
pci 0000:00:03.1:   bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:03.1:   bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
pci 0000:02:07.0: [1033:0035] type 00 class 0x0c0310
pci 0000:02:07.0: reg 0x10: [mem 0xfe902000-0xfe902fff]
pci 0000:02:07.0: supports D1 D2
pci 0000:02:07.0: PME# supported from D0 D1 D2 D3hot
pci 0000:02:07.1: [1033:0035] type 00 class 0x0c0310
pci 0000:02:07.1: reg 0x10: [mem 0xfe901000-0xfe901fff]
pci 0000:02:07.1: supports D1 D2
pci 0000:02:07.1: PME# supported from D0 D1 D2 D3hot
pci 0000:02:07.2: [1033:00e0] type 00 class 0x0c0320
pci 0000:02:07.2: reg 0x10: [mem 0xfe900000-0xfe9000ff]
pci 0000:02:07.2: supports D1 D2
pci 0000:02:07.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:14.4:   bridge window [io  0x0000-0x03af window] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xfed3ffff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xfed45000-0xffffffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
vgaarb: setting as boot device: PCI:0000:00:01.0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0x7d050000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7d343000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7e1d5000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7e851000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7f000000-0x7fffffff]
e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0x80000000-0xbfffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io  0x0220-0x0227] has been reserved
system 00:03: [io  0x0228-0x0237] has been reserved
system 00:03: [io  0x0a20-0x0a2f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:07: [io  0x04d0-0x04d1] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io  0x04d0-0x04d1] has been reserved
system 00:08: [io  0x040b] has been reserved
system 00:08: [io  0x04d6] has been reserved
system 00:08: [io  0x0c00-0x0c01] has been reserved
system 00:08: [io  0x0c14] has been reserved
system 00:08: [io  0x0c50-0x0c51] has been reserved
system 00:08: [io  0x0c52] has been reserved
system 00:08: [io  0x0c6c] has been reserved
system 00:08: [io  0x0c6f] has been reserved
system 00:08: [io  0x0cd0-0x0cd1] has been reserved
system 00:08: [io  0x0cd2-0x0cd3] has been reserved
system 00:08: [io  0x0cd4-0x0cd5] has been reserved
system 00:08: [io  0x0cd6-0x0cd7] has been reserved
system 00:08: [io  0x0cd8-0x0cdf] has been reserved
system 00:08: [io  0x0800-0x089f] could not be reserved
system 00:08: [io  0x0b20-0x0b3f] has been reserved
system 00:08: [io  0x0900-0x090f] has been reserved
system 00:08: [io  0x0910-0x091f] has been reserved
system 00:08: [io  0xfe00-0xfefe] has been reserved
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:08: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:08: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:08: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:03.1: PCI bridge to [bus 01]
pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
pci 0000:00:03.1:   bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:03.1:   bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 02]
pci 0000:00:14.4:   bridge window [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfed3ffff window]
pci_bus 0000:00: resource 11 [mem 0xfed45000-0xffffffff window]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xd0800000-0xd08fffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:02: resource 4 [io  0x0000-0x03af window]
pci_bus 0000:02: resource 5 [io  0x03e0-0x0cf7 window]
pci_bus 0000:02: resource 6 [io  0x03b0-0x03df window]
pci_bus 0000:02: resource 7 [io  0x0d00-0xffff window]
pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:02: resource 10 [mem 0xc0000000-0xfed3ffff window]
pci_bus 0000:02: resource 11 [mem 0xfed45000-0xffffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 31248K (ffff8800342e8000 - ffff88003616c000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x79050000-0x7d050000] (64MB) mapped at [ffff880079050000-ffff88007d04ffff]
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000001ff)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1477046995.840:1): initialized
Initialise system trusted keyring
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Allocating IMA MOK and blacklist keyrings.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:03.1: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.1:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90001000000, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb6f000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-22-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb6d000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-22-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:02:07.2: EHCI Host Controller
ehci-pci 0000:02:07.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:02:07.2: irq 23, io mem 0xfe900000
ehci-pci 0000:02:07.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 4.4.0-22-generic ehci_hcd
usb usb3: SerialNumber: 0000:02:07.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb70000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 4.4.0-22-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb6e000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 4.4.0-22-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb6c000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 4.4.0-22-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci-pci 0000:02:07.0: OHCI PCI host controller
ohci-pci 0000:02:07.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:02:07.0: irq 21, io mem 0xfe902000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 4.4.0-22-generic ohci_hcd
usb usb7: SerialNumber: 0000:02:07.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 3 ports detected
ohci-pci 0000:02:07.1: OHCI PCI host controller
ohci-pci 0000:02:07.1: new USB bus registered, assigned bus number 8
ohci-pci 0000:02:07.1: irq 22, io mem 0xfe901000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: OHCI PCI host controller
usb usb8: Manufacturer: Linux 4.4.0-22-generic ohci_hcd
usb usb8: SerialNumber: 0000:02:07.1
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 9
xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 4.4.0-22-generic xhci-hcd
usb usb9: SerialNumber: 0000:00:10.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 10
usb usb10: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb10: New USB device found, idVendor=1d6b, idProduct=0003
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 4.4.0-22-generic xhci-hcd
usb usb10: SerialNumber: 0000:00:10.0
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 11
xhci_hcd 0000:00:10.1: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
usb usb11: New USB device found, idVendor=1d6b, idProduct=0002
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: xHCI Host Controller
usb usb11: Manufacturer: Linux 4.4.0-22-generic xhci-hcd
usb usb11: SerialNumber: 0000:00:10.1
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 12
usb usb12: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb12: New USB device found, idVendor=1d6b, idProduct=0003
usb usb12: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb12: Product: xHCI Host Controller
usb usb12: Manufacturer: Linux 4.4.0-22-generic xhci-hcd
usb usb12: SerialNumber: 0000:00:10.1
hub 12-0:1.0: USB hub found
hub 12-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0: patch_level=0x06003106
microcode: CPU1: patch_level=0x06003106
microcode: CPU2: patch_level=0x06003106
microcode: CPU3: patch_level=0x06003106
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: f53317e6e2605a38562afec75d85df3b62286554'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
  Magic number: 4:450:831
rtc_cmos 00:06: setting system clock to 2016-10-21 10:49:56 UTC (1477046996)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1484K (ffffffff81d43000 - ffffffff81eb6000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 36K (ffff8800017f7000 - ffff880001800000)
Freeing unused kernel memory: 156K (ffff880001bd9000 - ffff880001c00000)
systemd-udevd[139]: starting version 204
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
acpi device:02: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000f16000, 74:d4:35:a1:a0:e1, XID 0c900800 IRQ 36
r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi host0: ahci
[drm] Initialized drm 1.1.0 20060810
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71100 irq 37
ata2: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71180 irq 37
ata3: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71200 irq 37
ata4: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71280 irq 37
ata5: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71300 irq 37
ata6: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71380 irq 37
ata7: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71400 irq 37
ata8: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71480 irq 37
[drm] radeon kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel 
AMD IOMMUv2 functionality not available on this system
Found CRAT image with size=1360
Parsing CRAT table with 1 nodes
Found CU entry in CRAT table with proximity_domain=0 caps=0
CU CPU: cores=4 id_base=16
Found CU entry in CRAT table with proximity_domain=0 caps=0
CU GPU: simds=32 id_base=-2147483648
Found memory entry in CRAT table with proximity_domain=0
Found memory entry in CRAT table with proximity_domain=0
Found cache entry in CRAT table with processor_id=16
Found cache entry in CRAT table with processor_id=16
Found cache entry in CRAT table with processor_id=16
Found cache entry in CRAT table with processor_id=17
Found cache entry in CRAT table with processor_id=18
Found cache entry in CRAT table with processor_id=18
Found cache entry in CRAT table with processor_id=18
Found cache entry in CRAT table with processor_id=19
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Creating topology SYSFS entries
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (c0000000 7f0000) vs hw (c0000000 10000000)
fb: switching to radeondrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (KAVERI 0x1002:0x130F 0x1458:0xD000).
[drm] register mmio base: 0xFEB00000
[drm] register mmio size: 262144
[drm] doorbell mmio base: 0xD0000000
[drm] doorbell mmio size: 8388608
ATOM BIOS: 113
radeon 0000:00:01.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:00:01.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone  kernel: Available graphics memory: 3542792 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 2048M of GTT memory ready.
[drm] Loading kaveri Microcode
[drm] Internal thermal controller without fan control
[drm] radeon: dpm initialized
[drm] Found VCE firmware/feedback version 40.2.2 / 15!
[drm] GART: num cpu pages 524288, num gpu pages 524288
[drm] PCIE GART of 2048M enabled (table at 0x0000000000324000).
radeon 0000:00:01.0: WB enabled
radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88023063dc00
radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff88023063dc04
radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff88023063dc08
radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88023063dc0c
radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff88023063dc10
radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc90001836c98
radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0xffff88023063dc18
radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0xffff88023063dc1c
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:00:01.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 1 succeeded in 2 usecs
[drm] ring test on 2 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 4 succeeded in 3 usecs
usb 5-1: new low-speed USB device number 2 using ohci-pci
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ring test on 6 succeeded in 16 usecs
[drm] ring test on 7 succeeded in 4 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
usb 5-1: New USB device found, idVendor=046d, idProduct=c03d
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: USB-PS/2 Optical Mouse
usb 5-1: Manufacturer: Logitech
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
usb 5-4: new low-speed USB device number 3 using ohci-pci
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: supports DRM functions and may not be fully accessible
ata2.00: ATA-8: Hitachi HDS721016CLA382, JPEOA39C, max UDMA/133
ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ATA-9: ST2000DM001-1ER164, CC43, max UDMA/133
ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: configured for UDMA/133
ata2.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      ST2000DM001-1ER1 CC43 PQ: 0 ANSI: 5
ata3.00: ATAPI: TSSTcorp CDDVDW SH-224DB, SB01, max UDMA/100
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access     ATA      Hitachi HDS72101 A39C PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: configured for UDMA/100
scsi 2:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-224DB  SB01 PQ: 0 ANSI: 5
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
tsc: Refined TSC clocksource calibration: 3693.281 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a791632c9c, max_idle_ns: 881591001453 ns
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg2 type 5
 sdb: sdb1 sdb2 < sdb5 >
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 5-4: New USB device found, idVendor=1c4f, idProduct=0002
usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-4: Product: USB Keyboard
usb 5-4: Manufacturer: SIGMACHIP
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/0003:046D:C03D.0001/input/input6
hid-generic 0003:046D:C03D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-1/input0
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-4/5-4:1.0/0003:1C4F:0002.0002/input/input7
[drm] ib test on ring 1 succeeded in 0 usecs
hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:13.0-4/input0
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-4/5-4:1.1/0003:1C4F:0002.0003/input/input8
hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:13.0-4/input1
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
clocksource: Switched to clocksource tsc
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   DVI-D-1
[drm]   HPD3
[drm]   DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[drm]   Encoders:
[drm]     DFP2: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm]   HDMI-A-1
[drm]   HPD1
[drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm]   Encoders:
[drm]     DFP1: INTERNAL_UNIPHY
[drm] Connector 2:
[drm]   VGA-1
[drm]   HPD2
[drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm]   Encoders:
[drm]     CRT1: INTERNAL_UNIPHY3
[drm]     CRT1: NUTMEG
[drm] fb mappable at 0xC0728000
[drm] vram apper at 0xC0000000
[drm] size 8294400
[drm] fb depth is 24
[drm]    pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
ACPI Error: [\_SB_.ALIB] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.VGA.ATC0] (Node ffff8802370c4078), AE_NOT_FOUND (20150930/psparse-542)
ACPI Error: Method parse/execution failed [\_SB.PCI0.VGA.ATCS] (Node ffff8802370c4050), AE_NOT_FOUND (20150930/psparse-542)
kfd kfd: Allocated 3944480 bytes on gart for device(1002:130f)
kfd kfd: error getting iommu info. is the iommu enabled?
kfd kfd: Error initializing iommuv2 for device (1002:130f)
Creating topology SYSFS entries
kfd kfd: device (1002:130f) NOT added due to errors
[drm] Initialized radeon 2.43.0 20080528 for 0000:00:01.0 on minor 0
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
random: nonblocking pool is initialized
Adding 7280636k swap on /dev/sdb5.  Priority:-1 extents:1 across:7280636k FS
systemd-udevd[425]: starting version 204
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 3.0.0
MCE: In-kernel MCE decoding enabled.
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
device-mapper: multipath: version 1.10.0 loaded
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
snd_hda_intel 0000:00:01.1: Force to non-snoop mode
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input9
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC1D0:    inputs:
snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
init: failsafe main process (748) killed by TERM signal
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: cups main process (806) killed by HUP signal
init: cups main process ended, respawning
init: samba-ad-dc main process (1137) terminated with status 1
r8169 0000:01:00.0 eth0: link down
r8169 0000:01:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:01:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1576) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
conftest[16851]: segfault at 0 ip 00000000004005c0 sp 00007ffdb1493520 error 4 in conftest[400000+1000]
conftest[16879]: segfault at 0 ip 00007f1ae27dce16 sp 00007fffaceb5e68 error 4 in libc-2.19.so[7f1ae269d000+1ba000]

Return To 1 System Information