dmesg - wsak
Linux version 4.7.5-1-MANJARO (builduser@manjaro) (gcc version 6.2.1 20160830 (GCC) ) #1 SMP PREEMPT Sat Sep 24 12:18:23 UTC 2016
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000bd00afff] usable
BIOS-e820: [mem 0x00000000bd00b000-0x00000000bd03afff] reserved
BIOS-e820: [mem 0x00000000bd03b000-0x00000000bd309fff] usable
BIOS-e820: [mem 0x00000000bd30a000-0x00000000bd3c2fff] ACPI NVS
BIOS-e820: [mem 0x00000000bd3c3000-0x00000000be1fdfff] reserved
BIOS-e820: [mem 0x00000000be1fe000-0x00000000be239fff] type 20
BIOS-e820: [mem 0x00000000be23a000-0x00000000be23afff] usable
BIOS-e820: [mem 0x00000000be23b000-0x00000000be440fff] ACPI NVS
BIOS-e820: [mem 0x00000000be441000-0x00000000be881fff] usable
BIOS-e820: [mem 0x00000000be882000-0x00000000beff2fff] reserved
BIOS-e820: [mem 0x00000000beff3000-0x00000000beffffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000001beffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ESRT=0xbe1fcc98 ACPI=0xbd38c000 ACPI 2.0=0xbd38c000 SMBIOS=0xf04d0 MPS=0xfd5b0
esrt: Reserving ESRT space from 0x00000000be1fcc98 to 0x00000000be1fccd0.
SMBIOS 2.8 present.
DMI: MSI MS-7721/A68HM-P33 (MS-7721), BIOS V34.2 09/26/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x1bf000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000BF000000 mask FFFFFF000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 00000001bf000000 aka 7152M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xbf000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd960-0x000fd96f] mapped at [ffff8800000fd960]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0x02b59000, 0x02b59fff] PGTABLE
BRK [0x02b5a000, 0x02b5afff] PGTABLE
BRK [0x02b5b000, 0x02b5bfff] PGTABLE
BRK [0x02b5c000, 0x02b5cfff] PGTABLE
BRK [0x02b5d000, 0x02b5dfff] PGTABLE
BRK [0x02b5e000, 0x02b5efff] PGTABLE
RAMDISK: [mem 0x37271000-0x3792ffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000BD38C000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BD38C090 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000BD392A98 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20160422/tbfadt-658)
ACPI: DSDT 0x00000000BD38C1C0 0068D2 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 0x00000000BD3B9E80 000040
ACPI: APIC 0x00000000BD392BA8 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000BD392C20 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x00000000BD392C68 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000BD392D08 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x00000000BD392D48 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: UEFI 0x00000000BD392D80 000042 (v01 ALASKA A M I 01072009 00000000)
ACPI: IVRS 0x00000000BD392DC8 000068 (v02 AMD BANTRY 00000001 AMD 00000000)
ACPI: SSDT 0x00000000BD392E30 0006B2 (v01 AMD BANTRY 00000001 AMD 00000001)
ACPI: SSDT 0x00000000BD3934E8 0004B7 (v02 AMD BANTRY 00000001 MSFT 04000000)
ACPI: CRAT 0x00000000BD3939A0 0002E8 (v01 AMD BANTRY 00000001 AMD 00000001)
ACPI: SSDT 0x00000000BD393C88 00122C (v01 AMD CPMCMN 00000001 INTL 20051117)
ACPI: SSDT 0x00000000BD394EB8 000852 (v01 AMD CPMDFDGP 00000001 INTL 20051117)
ACPI: SSDT 0x00000000BD395710 001457 (v01 AMD CPMDFIGP 00000001 INTL 20051117)
ACPI: BGRT 0x00000000BD396B68 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000001beffffff]
NODE_DATA(0) allocated [mem 0x1beff7000-0x1beffafff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000001beffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x00000000bd00afff]
node 0: [mem 0x00000000bd03b000-0x00000000bd309fff]
node 0: [mem 0x00000000be23a000-0x00000000be23afff]
node 0: [mem 0x00000000be441000-0x00000000be881fff]
node 0: [mem 0x00000000beff3000-0x00000000beffffff]
node 0: [mem 0x0000000100000000-0x00000001beffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000001beffffff]
On node 0 totalpages: 1558216
DMA zone: 64 pages used for memmap
DMA zone: 27 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 12061 pages used for memmap
DMA32 zone: 771881 pages, LIFO batch:31
Normal zone: 12224 pages used for memmap
Normal zone: 782336 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbd00b000-0xbd03afff]
PM: Registered nosave memory: [mem 0xbd30a000-0xbd3c2fff]
PM: Registered nosave memory: [mem 0xbd3c3000-0xbe1fdfff]
PM: Registered nosave memory: [mem 0xbe1fe000-0xbe239fff]
PM: Registered nosave memory: [mem 0xbe23b000-0xbe440fff]
PM: Registered nosave memory: [mem 0xbe882000-0xbeff2fff]
PM: Registered nosave memory: [mem 0xbf000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xbf000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 33 pages/cpu @ffff8801bec00000 s97944 r8192 d29032 u524288
pcpu-alloc: s97944 r8192 d29032 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1533840
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 5829792K/6232864K available (6036K kernel code, 981K rwdata, 1892K rodata, 1244K init, 1164K bss, 403072K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:8448 nr_irqs:456 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: Unable to calibrate against PIT
tsc: using HPET reference calibration
tsc: Detected 3693.087 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7389.93 BogoMIPS (lpj=12310290)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160422
ACPI: 6 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Freeing SMP alternatives memory: 24K (ffffffff81a2e000 - ffffffff81a34000)
ftrace: allocating 23963 entries in 94 pages
smpboot: Max logical packages: 4
smpboot: APIC(10) Converting physical 1 to logical package 0
[Firmware Bug]: AMD-Vi: IOAPIC[0] not in IVRS table
[Firmware Bug]: AMD-Vi: No southbridge IOAPIC found
AMD-Vi: Disabling interrupt remapping
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A4-6300 APU with Radeon(tm) HD Graphics (family: 0x15, model: 0x13, stepping: 0x1)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (14777.42 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xbd30a000-0xbd3c2fff] (757760 bytes)
PM: Registering ACPI NVS region [mem 0xbe23b000-0xbe440fff] (2121728 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 17:19:05, date: 10/09/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfed3ffff window]
pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
pci 0000:00:00.2: [1022:1419] type 00 class 0x080600
pci 0000:00:02.0: [1022:1412] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:06.0: [1022:1416] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [1022:1417] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xfeb04000-0xfeb05fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b7ff]
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
pci 0000:01:00.0: [1002:68d9] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xfea20000-0xfea3ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x30: [mem 0xfea00000-0xfea1ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa60] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfea40000-0xfea43fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xfe900000-0xfe900fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:03:00.0: [14f1:8880] type 00 class 0x040000
pci 0000:03:00.0: reg 0x10: [mem 0xfe600000-0xfe7fffff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:06.0: PCI bridge to [bus 03]
pci 0000:00:06.0: bridge window [mem 0xfe600000-0xfe7fffff]
pci 0000:04:00.0: [1814:3090] type 00 class 0x028000
pci 0000:04:00.0: reg 0x10: [mem 0xfe800000-0xfe80ffff]
pci 0000:00:07.0: PCI bridge to [bus 04]
pci 0000:00:07.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xfed3ffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0xbd00b000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbd30a000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbe23b000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbe882000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff]
e820: reserve RAM buffer [mem 0x1bf000000-0x1bfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [mem 0xfeb80000-0xfebfffff] could not be reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0295-0x0296] has been reserved
system 00:03: [io 0x0778-0x077f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: [dma 3]
pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: [io 0x040b] has been reserved
system 00:09: [io 0x04d6] has been reserved
system 00:09: [io 0x0c00-0x0c01] has been reserved
system 00:09: [io 0x0c14] has been reserved
system 00:09: [io 0x0c50-0x0c51] has been reserved
system 00:09: [io 0x0c52] has been reserved
system 00:09: [io 0x0c6c] has been reserved
system 00:09: [io 0x0c6f] has been reserved
system 00:09: [io 0x0cd0-0x0cd1] has been reserved
system 00:09: [io 0x0cd2-0x0cd3] has been reserved
system 00:09: [io 0x0cd4-0x0cd5] has been reserved
system 00:09: [io 0x0cd6-0x0cd7] has been reserved
system 00:09: [io 0x0cd8-0x0cdf] has been reserved
system 00:09: [io 0x0800-0x089f] has been reserved
system 00:09: [io 0x0b20-0x0b3f] has been reserved
system 00:09: [io 0x0900-0x090f] has been reserved
system 00:09: [io 0x0910-0x091f] has been reserved
system 00:09: [io 0xfe00-0xfefe] has been reserved
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:09: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:09: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:09: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 03]
pci 0000:00:06.0: bridge window [mem 0xfe600000-0xfe7fffff]
pci 0000:00:07.0: PCI bridge to [bus 04]
pci 0000:00:07.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:14.4: PCI bridge to [bus 05]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfed3ffff window]
pci_bus 0000:00: resource 11 [mem 0xfed45000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xfe600000-0xfe7fffff]
pci_bus 0000:04: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:05: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:05: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:05: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:05: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:05: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:05: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:05: resource 10 [mem 0xc0000000-0xfed3ffff window]
pci_bus 0000:05: resource 11 [mem 0xfed45000-0xffffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 6908K (ffff880037271000 - ffff880037930000)
iommu: Adding device 0000:00:02.0 to group 0
iommu: Adding device 0000:00:04.0 to group 1
iommu: Adding device 0000:00:06.0 to group 2
iommu: Adding device 0000:00:07.0 to group 3
iommu: Adding device 0000:00:10.0 to group 4
iommu: Adding device 0000:00:11.0 to group 5
iommu: Adding device 0000:00:12.0 to group 6
iommu: Adding device 0000:00:12.2 to group 6
iommu: Adding device 0000:00:13.0 to group 7
iommu: Adding device 0000:00:13.2 to group 7
iommu: Adding device 0000:00:14.0 to group 8
iommu: Adding device 0000:00:14.2 to group 8
iommu: Adding device 0000:00:14.3 to group 8
iommu: Adding device 0000:00:14.4 to group 9
iommu: Adding device 0000:00:14.5 to group 10
iommu: Adding device 0000:00:18.0 to group 11
iommu: Adding device 0000:00:18.1 to group 11
iommu: Adding device 0000:00:18.2 to group 11
iommu: Adding device 0000:00:18.3 to group 11
iommu: Adding device 0000:00:18.4 to group 11
iommu: Adding device 0000:00:18.5 to group 11
iommu: Adding device 0000:01:00.0 to group 0
iommu: Adding device 0000:01:00.1 to group 0
iommu: Adding device 0000:02:00.0 to group 1
iommu: Adding device 0000:03:00.0 to group 2
iommu: Adding device 0000:04:00.0 to group 3
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Extended features: PreF PPR GT IA
AMD-Vi: Lazy IO/TLB flushing enabled
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyrings
workingset: timestamp_bits=38 max_order=21 bucket_order=0
zbud: loaded
Key type big_key registered
Key type asymmetric registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler bfq registered (default)
BFQ I/O-scheduler: v7r8
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
GHES: HEST is not enabled!
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:07: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
IPv6: Loaded, but administratively disabled, reboot required to enable
NET: Registered protocol family 17
microcode: CPU0: patch_level=0x06001119
microcode: CPU1: patch_level=0x06001119
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Magic number: 4:774:339
rtc_cmos 00:07: setting system clock to 2016-10-09 17:19:06 UTC (1476033546)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1244K (ffffffff818f7000 - ffffffff81a2e000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 92K (ffff8800025e9000 - ffff880002600000)
Freeing unused kernel memory: 156K (ffff8800027d9000 - ffff880002800000)
random: systemd-tmpfile: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
SCSI subsystem initialized
usbcore: registered new device driver usb
QUIRK: Enable AMD PLL fix
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ehci-pci: EHCI PCI platform driver
libata version 3.00 loaded.
xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ahci 0000:00:11.0: version 3.0
ohci-pci: OHCI PCI platform driver
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xfeb0b000 port 0xfeb0b100 irq 28
ata2: SATA max UDMA/133 abar m2048@0xfeb0b000 port 0xfeb0b180 irq 28
ata3: SATA max UDMA/133 abar m2048@0xfeb0b000 port 0xfeb0b200 irq 28
ata4: SATA max UDMA/133 abar m2048@0xfeb0b000 port 0xfeb0b280 irq 28
ata5: SATA max UDMA/133 abar m2048@0xfeb0b000 port 0xfeb0b300 irq 28
ata6: SATA max UDMA/133 abar m2048@0xfeb0b000 port 0xfeb0b380 irq 28
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ata6: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
usb 6-3: new low-speed USB device number 2 using ohci-pci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: ST9500325AS, 0002SDM1, max UDMA/133
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
usb 5-3: new low-speed USB device number 2 using ohci-pci
ata1.00: ATA-8: WDC WD2500AVJS-63WDA0, 12.01B02, max UDMA/133
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD2500AVJS-6 1B02 PQ: 0 ANSI: 5
ata4.00: ATA-8: ST9250311CS, SC1D, max UDMA/133
ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST9500325AS SDM1 PQ: 0 ANSI: 5
scsi 3:0:0:0: Direct-Access ATA ST9250311CS SC1D PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: OM as /devices/pci0000:00/0000:00:13.0/usb6/6-3/6-3:1.0/0003:04F3:0235.0001/input/input2
hid-generic 0003:04F3:0235.0001: input,hidraw0: USB HID v1.11 Mouse [OM] on usb-0000:00:13.0-3/input0
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
input: DragonRise Inc. Generic USB Joystick as /devices/pci0000:00/0000:00:12.0/usb5/5-3/5-3:1.0/0003:0079:0006.0002/input/input3
dragonrise 0003:0079:0006.0002: input,hidraw1: USB HID v1.10 Joystick [DragonRise Inc. Generic USB Joystick ] on usb-0000:00:12.0-3/input0
dragonrise 0003:0079:0006.0002: Force Feedback for DragonRise Inc. game controllers by Richard Walmsley
sdc: sdc1 sdc2 sdc3 sdc4 sdc5
sd 3:0:0:0: [sdc] Attached SCSI disk
usb 5-5: new low-speed USB device number 3 using ohci-pci
tsc: Refined TSC clocksource calibration: 3693.095 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a77b6b7dcd, max_idle_ns: 881590639977 ns
input: MOSART Semi. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:12.0/usb5/5-5/5-5:1.0/0003:062A:0102.0003/input/input4
hid-generic 0003:062A:0102.0003: input,hidraw2: USB HID v1.10 Keyboard [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:12.0-5/input0
input: MOSART Semi. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:12.0/usb5/5-5/5-5:1.1/0003:062A:0102.0004/input/input5
hid-generic 0003:062A:0102.0004: input,hiddev0,hidraw3: USB HID v1.10 Mouse [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:12.0-5/input1
random: nonblocking pool is initialized
PM: Starting manual resume from disk
PM: Hibernation image partition 8:37 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null)
clocksource: Switched to clocksource tsc
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 231 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Reached target Login Prompts.
systemd[1]: Listening on Journal Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Reached target Remote File Systems.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Set Up Additional Binary Formats...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Reached target Slices.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Journal Service...
systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 160 (systemd-binfmt)
systemd[1]: Mounting Arbitrary Executable File Formats File System...
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd-journald[168]: [/etc/systemd/journald.conf:1] Assignment outside of section. Ignoring.
systemd-journald[168]: [/etc/systemd/journald.conf:2] Assignment outside of section. Ignoring.
systemd[1]: Started Load Kernel Modules.
systemd[1]: Mounting Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Huge Pages File System.
EXT4-fs (sdc3): re-mounted. Opts: (null)
systemd[1]: Started Remount Root and Kernel File Systems.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Mounted Arbitrary Executable File Formats File System.
systemd[1]: Mounted Configuration File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Started Load/Save Random Seed.
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Started Setup Virtual Console.
systemd[1]: Starting Show Plymouth Boot Screen...
systemd[1]: Started udev Kernel Device Manager.
acpi_cpufreq: overriding BIOS provided _PSD data
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
ACPI: Power Button [PWRF]
ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
acpi device:21: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:20/LNXVIDEO:01/input/input8
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP]
FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
wmi: Mapper loaded
systemd[1]: Found device ST9500325AS 1.
r8168 Gigabit Ethernet driver 8.040.00-NAPI loaded
r8168 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
r8168 Copyright (C) 2015 Realtek NIC software team
This program comes with ABSOLUTELY NO WARRANTY; for details, please see .
This is free software, and you are welcome to redistribute it under certain conditions; see .
media: Linux media interface: v0.10
Linux video capture interface: v2.00
[drm] Initialized drm 1.1.0 20060810
rt2800pci 0000:04:00.0: enabling device (0000 -> 0002)
ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3090, rev 3213 detected
ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Vendor ID: 0x1022, Device ID: 0x780b, Revision ID: 0x16
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xffffc90000ce0b00). heartbeat=60 sec (nowayout=0)
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input9
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[drm] radeon kernel modesetting enabled.
systemd[1]: Found device ST9250311CS ANTERGOS_BOOT.
AMD IOMMUv2 driver by Joerg Roedel
systemd[1]: Started Journal Service.
mousedev: PS/2 mouse device common for all mice
Found CRAT image with size=744
Parsing CRAT table with 1 nodes
Found CU entry in CRAT table with proximity_domain=0 caps=0
CU CPU: cores=2 id_base=16
Found memory entry in CRAT table with proximity_domain=0
Found memory entry in CRAT table with proximity_domain=0
Found cache entry in CRAT table with processor_id=16
Found cache entry in CRAT table with processor_id=16
Found cache entry in CRAT table with processor_id=16
Found cache entry in CRAT table with processor_id=17
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Creating topology SYSFS entries
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (c0000000 300000) vs hw (c0000000 10000000)
fb: switching to radeondrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (REDWOOD 0x1002:0x68D9 0x1043:0x035C 0x00).
[drm] register mmio base: 0xFEA20000
[drm] register mmio size: 131072
ATOM BIOS: 68D9.12.17.0.4.AS04
radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 3061706 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading REDWOOD Microcode
cx23885 driver version 0.0.4 loaded
cx23885 0000:03:00.0: enabling device (0000 -> 0002)
cx23885[0]: Your board isn't known (yet) to the driver.
cx23885[0]: Try to pick one of the existing card configs via
cx23885[0]: card= insmod option. Updating to the latest
cx23885[0]: version might help as well.
cx23885[0]: Here is a list of valid choices for the card= insmod option:
cx23885[0]: card=0 -> UNKNOWN/GENERIC
cx23885[0]: card=1 -> Hauppauge WinTV-HVR1800lp
cx23885[0]: card=2 -> Hauppauge WinTV-HVR1800
cx23885[0]: card=3 -> Hauppauge WinTV-HVR1250
cx23885[0]: card=4 -> DViCO FusionHDTV5 Express
cx23885[0]: card=5 -> Hauppauge WinTV-HVR1500Q
cx23885[0]: card=6 -> Hauppauge WinTV-HVR1500
cx23885[0]: card=7 -> Hauppauge WinTV-HVR1200
cx23885[0]: card=8 -> Hauppauge WinTV-HVR1700
cx23885[0]: card=9 -> Hauppauge WinTV-HVR1400
cx23885[0]: card=10 -> DViCO FusionHDTV7 Dual Express
cx23885[0]: card=11 -> DViCO FusionHDTV DVB-T Dual Express
cx23885[0]: card=12 -> Leadtek Winfast PxDVR3200 H
cx23885[0]: card=13 -> Compro VideoMate E650F
cx23885[0]: card=14 -> TurboSight TBS 6920
cx23885[0]: card=15 -> TeVii S470
cx23885[0]: card=16 -> DVBWorld DVB-S2 2005
cx23885[0]: card=17 -> NetUP Dual DVB-S2 CI
cx23885[0]: card=18 -> Hauppauge WinTV-HVR1270
cx23885[0]: card=19 -> Hauppauge WinTV-HVR1275
cx23885[0]: card=20 -> Hauppauge WinTV-HVR1255
cx23885[0]: card=21 -> Hauppauge WinTV-HVR1210
cx23885[0]: card=22 -> Mygica X8506 DMB-TH
cx23885[0]: card=23 -> Magic-Pro ProHDTV Extreme 2
cx23885[0]: card=24 -> Hauppauge WinTV-HVR1850
cx23885[0]: card=25 -> Compro VideoMate E800
cx23885[0]: card=26 -> Hauppauge WinTV-HVR1290
cx23885[0]: card=27 -> Mygica X8558 PRO DMB-TH
cx23885[0]: card=28 -> LEADTEK WinFast PxTV1200
cx23885[0]: card=29 -> GoTView X5 3D Hybrid
cx23885[0]: card=30 -> NetUP Dual DVB-T/C-CI RF
cx23885[0]: card=31 -> Leadtek Winfast PxDVR3200 H XC4000
cx23885[0]: card=32 -> MPX-885
cx23885[0]: card=33 -> Mygica X8502/X8507 ISDB-T
cx23885[0]: card=34 -> TerraTec Cinergy T PCIe Dual
cx23885[0]: card=35 -> TeVii S471
cx23885[0]: card=36 -> Hauppauge WinTV-HVR1255
cx23885[0]: card=37 -> Prof Revolution DVB-S2 8000
cx23885[0]: card=38 -> Hauppauge WinTV-HVR4400/HVR5500
cx23885[0]: card=39 -> AVerTV Hybrid Express Slim HC81R
cx23885[0]: card=40 -> TurboSight TBS 6981
cx23885[0]: card=41 -> TurboSight TBS 6980
cx23885[0]: card=42 -> Leadtek Winfast PxPVR2200
cx23885[0]: card=43 -> Hauppauge ImpactVCB-e
cx23885[0]: card=44 -> DViCO FusionHDTV DVB-T Dual Express2
cx23885[0]: card=45 -> DVBSky T9580
cx23885[0]: card=46 -> DVBSky T980C
cx23885[0]: card=47 -> DVBSky S950C
cx23885[0]: card=48 -> Technotrend TT-budget CT2-4500 CI
cx23885[0]: card=49 -> DVBSky S950
cx23885[0]: card=50 -> DVBSky S952
cx23885[0]: card=51 -> DVBSky T982
cx23885[0]: card=52 -> Hauppauge WinTV-HVR5525
cx23885[0]: card=53 -> Hauppauge WinTV Starburst
cx23885[0]: card=54 -> ViewCast 260e
cx23885[0]: card=55 -> ViewCast 460e
CORE cx23885[0]: subsystem: 1461:e139, board: UNKNOWN/GENERIC [card=0,autodetected]
ppdev: user-space parallel port driver
systemd-journald[168]: Received request to flush runtime journal from PID 1
cx23885_dev_checkrevision() Hardware revision = 0xd0
cx23885[0]/0: found at 0000:03:00.0, rev: 4, irq: 18, latency: 0, mmio: 0xfe600000
[drm] Internal thermal controller with fan control
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8800abe23c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8800abe23c0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9000281c418
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 2 usecs
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
Adding 5350560k swap on /dev/sdc5. Priority:-1 extents:1 across:5350560k FS
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] HDMI-A-1
[drm] HPD4
[drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] DVI-I-1
[drm] HPD1
[drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY1
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 2:
[drm] VGA-1
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] fb mappable at 0xC034D000
[drm] vram apper at 0xC0000000
[drm] size 3145728
[drm] fb depth is 24
[drm] pitch is 4096
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.45.0 20080528 for 0000:01:00.0 on minor 0
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
EXT4-fs (sdc4): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
eth0: 0xffffc90000cde000, d8:cb:8a:15:5d:11, IRQ 29
ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'
ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.40
wlan0: authenticate with 58:23:8c:02:5e:56
wlan0: send auth to 58:23:8c:02:5e:56 (try 1/3)
wlan0: authenticated
wlan0: associate with 58:23:8c:02:5e:56 (try 1/3)
wlan0: RX AssocResp from 58:23:8c:02:5e:56 (capab=0x1411 status=0 aid=1)
wlan0: associated
fuse init (API version 7.25)
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
wlan0: deauthenticating from 58:23:8c:02:5e:56 by local choice (Reason: 3=DEAUTH_LEAVING)
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
AMD-Vi: Event logged [IO_PAGE_FAULT device=04:00.0 domain=0x0004 address=0x0000000000550000 flags=0x0000]
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.002 seconds) done.
Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds)
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
parport_pc 00:05: disabled
serial 00:04: disabled
sd 3:0:0:0: [sdc] Synchronizing SCSI cache
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 1:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
sd 3:0:0:0: [sdc] Stopping disk
PM: suspend of devices complete after 637.836 msecs
PM: late suspend of devices complete after 0.492 msecs
ohci-pci 0000:00:14.5: System wakeup enabled by ACPI
ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
ohci-pci 0000:00:13.0: System wakeup enabled by ACPI
ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
ohci-pci 0000:00:12.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:10.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 11.458 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
LVT offset 0 assigned for vector 0x400
[Firmware Bug]: cpu 0, try to use APIC500 (LVT offset 0) for vector 0xf9, but the register is already in use for vector 0x400 on another cpu
[Firmware Bug]: cpu 0, failed to setup threshold interrupt for bank 4, block 0 (MSR00000413=0xc000000001000000)
[Firmware Bug]: cpu 0, try to use APIC500 (LVT offset 0) for vector 0xf9, but the register is already in use for vector 0x400 on another cpu
[Firmware Bug]: cpu 0, failed to setup threshold interrupt for bank 4, block 1 (MSRC0000408=0xc000000001000000)
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x11
TSC synchronization [CPU#0 -> CPU#1]:
Measured 2012188739 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
cache: parent cpu1 should not be sleeping
CPU1 is up
clocksource: Switched to clocksource hpet
ACPI: Waking up from system sleep state S3
ohci-pci 0000:00:12.0: System wakeup disabled by ACPI
ohci-pci 0000:00:13.0: System wakeup disabled by ACPI
ohci-pci 0000:00:14.5: System wakeup disabled by ACPI
ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
xhci_hcd 0000:00:10.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 11.525 msecs
PM: early resume of devices complete after 0.228 msecs
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
serial 00:04: activated
[drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8800abe23c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8800abe23c0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9000281c418
parport_pc 00:05: activated
rtc_cmos 00:07: System wakeup disabled by ACPI
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
sd 0:0:0:0: [sda] Starting disk
sd 1:0:0:0: [sdb] Starting disk
sd 3:0:0:0: [sdc] Starting disk
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
usb 5-3: reset low-speed USB device number 2 using ohci-pci
usb 6-3: reset low-speed USB device number 2 using ohci-pci
[drm] ib test on ring 5 succeeded
PM: resume of devices complete after 1039.270 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:01: Restoring backlight state
eth0: 0xffffc90000cde000, d8:cb:8a:15:5d:11, IRQ 29
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
wlan0: authenticate with 58:23:8c:02:5e:56
wlan0: send auth to 58:23:8c:02:5e:56 (try 1/3)
wlan0: authenticated
wlan0: associate with 58:23:8c:02:5e:56 (try 1/3)
wlan0: RX AssocResp from 58:23:8c:02:5e:56 (capab=0x1411 status=0 aid=3)
wlan0: associated
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
wlan0: authenticate with 58:23:8c:02:5e:56
wlan0: send auth to 58:23:8c:02:5e:56 (try 1/3)
wlan0: authenticated
wlan0: associate with 58:23:8c:02:5e:56 (try 1/3)
wlan0: RX AssocResp from 58:23:8c:02:5e:56 (capab=0x1411 status=0 aid=3)
wlan0: associated