dmesg - r
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-642.el6.x86_64 (mockbuild@worker1.bsys.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-17) (GCC) ) #1 SMP Tue May 10 17:27:01 UTC 2016
Command line: ro root=/dev/mapper/vg_adentrocentos-lv_root rd_NO_LUKS KEYBOARDTYPE=pc KEYTABLE=br-abnt2 LANG=pt_BR.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_adentrocentos/lv_root rd_LVM_LV=vg_adentrocentos/lv_swap rd_NO_DM rhgb quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000058000 (usable)
BIOS-e820: 0000000000058000 - 0000000000059000 (reserved)
BIOS-e820: 0000000000059000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 0000000000100000 - 0000000086844000 (usable)
BIOS-e820: 0000000086844000 - 0000000086845000 (ACPI NVS)
BIOS-e820: 0000000086845000 - 000000008688f000 (reserved)
BIOS-e820: 000000008688f000 - 00000000868e4000 (usable)
BIOS-e820: 00000000868e4000 - 0000000086d60000 (reserved)
BIOS-e820: 0000000086d60000 - 0000000086d76000 (usable)
BIOS-e820: 0000000086d76000 - 00000000879ca000 (reserved)
BIOS-e820: 00000000879ca000 - 0000000087f9a000 (ACPI NVS)
BIOS-e820: 0000000087f9a000 - 0000000087fcd000 (ACPI data)
BIOS-e820: 0000000087fcd000 - 0000000088000000 (usable)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fe000000 - 00000000fe011000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000472000000 (usable)
EFI v2.40 by American Megatrends
ACPI=0x87bf5000 ACPI 2.0=0x87bf5000 SMBIOS=0xf05e0 MPS=0xfc920
EFI: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
EFI: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x0000000000056000) (0MB)
EFI: mem02: type=2, attr=0xf, range=[0x0000000000056000-0x0000000000058000) (0MB)
EFI: mem03: type=0, attr=0xf, range=[0x0000000000058000-0x0000000000059000) (0MB)
EFI: mem04: type=7, attr=0xf, range=[0x0000000000059000-0x000000000005f000) (0MB)
EFI: mem05: type=4, attr=0xf, range=[0x000000000005f000-0x0000000000060000) (0MB)
EFI: mem06: type=3, attr=0xf, range=[0x0000000000060000-0x000000000009f000) (0MB)
EFI: mem07: type=0, attr=0xf, range=[0x000000000009f000-0x00000000000a0000) (0MB)
EFI: mem08: type=7, attr=0xf, range=[0x0000000000100000-0x0000000066d77000) (1644MB)
EFI: mem09: type=4, attr=0xf, range=[0x0000000066d77000-0x0000000066df7000) (0MB)
EFI: mem10: type=7, attr=0xf, range=[0x0000000066df7000-0x000000007e97c000) (379MB)
EFI: mem11: type=2, attr=0xf, range=[0x000000007e97c000-0x0000000080000000) (22MB)
EFI: mem12: type=7, attr=0xf, range=[0x0000000080000000-0x0000000081e2d000) (30MB)
EFI: mem13: type=2, attr=0xf, range=[0x0000000081e2d000-0x0000000082bd7000) (13MB)
EFI: mem14: type=7, attr=0xf, range=[0x0000000082bd7000-0x0000000082c23000) (0MB)
EFI: mem15: type=2, attr=0xf, range=[0x0000000082c23000-0x0000000082e7d000) (2MB)
EFI: mem16: type=1, attr=0xf, range=[0x0000000082e7d000-0x0000000082ebe000) (0MB)
EFI: mem17: type=2, attr=0xf, range=[0x0000000082ebe000-0x0000000082efd000) (0MB)
EFI: mem18: type=4, attr=0xf, range=[0x0000000082efd000-0x0000000082f20000) (0MB)
EFI: mem19: type=3, attr=0xf, range=[0x0000000082f20000-0x0000000082f5d000) (0MB)
EFI: mem20: type=2, attr=0xf, range=[0x0000000082f5d000-0x0000000082f77000) (0MB)
EFI: mem21: type=4, attr=0xf, range=[0x0000000082f77000-0x0000000082ff8000) (0MB)
EFI: mem22: type=2, attr=0xf, range=[0x0000000082ff8000-0x0000000083000000) (0MB)
EFI: mem23: type=4, attr=0xf, range=[0x0000000083000000-0x0000000083055000) (0MB)
EFI: mem24: type=2, attr=0xf, range=[0x0000000083055000-0x0000000083058000) (0MB)
EFI: mem25: type=4, attr=0xf, range=[0x0000000083058000-0x0000000083072000) (0MB)
EFI: mem26: type=3, attr=0xf, range=[0x0000000083072000-0x0000000083279000) (2MB)
EFI: mem27: type=2, attr=0xf, range=[0x0000000083279000-0x000000008328c000) (0MB)
EFI: mem28: type=4, attr=0xf, range=[0x000000008328c000-0x000000008328d000) (0MB)
EFI: mem29: type=2, attr=0xf, range=[0x000000008328d000-0x00000000832a1000) (0MB)
EFI: mem30: type=4, attr=0xf, range=[0x00000000832a1000-0x000000008335b000) (0MB)
EFI: mem31: type=2, attr=0xf, range=[0x000000008335b000-0x000000008336a000) (0MB)
EFI: mem32: type=4, attr=0xf, range=[0x000000008336a000-0x000000008338f000) (0MB)
EFI: mem33: type=2, attr=0xf, range=[0x000000008338f000-0x0000000083392000) (0MB)
EFI: mem34: type=4, attr=0xf, range=[0x0000000083392000-0x00000000833dc000) (0MB)
EFI: mem35: type=2, attr=0xf, range=[0x00000000833dc000-0x00000000833e1000) (0MB)
EFI: mem36: type=4, attr=0xf, range=[0x00000000833e1000-0x00000000833e2000) (0MB)
EFI: mem37: type=2, attr=0xf, range=[0x00000000833e2000-0x00000000833e3000) (0MB)
EFI: mem38: type=4, attr=0xf, range=[0x00000000833e3000-0x0000000083480000) (0MB)
EFI: mem39: type=3, attr=0xf, range=[0x0000000083480000-0x0000000083481000) (0MB)
EFI: mem40: type=4, attr=0xf, range=[0x0000000083481000-0x00000000840e3000) (12MB)
EFI: mem41: type=3, attr=0xf, range=[0x00000000840e3000-0x000000008412f000) (0MB)
EFI: mem42: type=4, attr=0xf, range=[0x000000008412f000-0x0000000084130000) (0MB)
EFI: mem43: type=2, attr=0xf, range=[0x0000000084130000-0x0000000084131000) (0MB)
EFI: mem44: type=4, attr=0xf, range=[0x0000000084131000-0x0000000084171000) (0MB)
EFI: mem45: type=3, attr=0xf, range=[0x0000000084171000-0x0000000084176000) (0MB)
EFI: mem46: type=4, attr=0xf, range=[0x0000000084176000-0x0000000084178000) (0MB)
EFI: mem47: type=3, attr=0xf, range=[0x0000000084178000-0x00000000841f2000) (0MB)
EFI: mem48: type=4, attr=0xf, range=[0x00000000841f2000-0x00000000841f3000) (0MB)
EFI: mem49: type=3, attr=0xf, range=[0x00000000841f3000-0x00000000841f7000) (0MB)
EFI: mem50: type=4, attr=0xf, range=[0x00000000841f7000-0x00000000841fb000) (0MB)
EFI: mem51: type=3, attr=0xf, range=[0x00000000841fb000-0x00000000841fd000) (0MB)
EFI: mem52: type=4, attr=0xf, range=[0x00000000841fd000-0x00000000841fe000) (0MB)
EFI: mem53: type=3, attr=0xf, range=[0x00000000841fe000-0x0000000084203000) (0MB)
EFI: mem54: type=4, attr=0xf, range=[0x0000000084203000-0x0000000084209000) (0MB)
EFI: mem55: type=3, attr=0xf, range=[0x0000000084209000-0x000000008420a000) (0MB)
EFI: mem56: type=4, attr=0xf, range=[0x000000008420a000-0x000000008420b000) (0MB)
EFI: mem57: type=3, attr=0xf, range=[0x000000008420b000-0x000000008420c000) (0MB)
EFI: mem58: type=4, attr=0xf, range=[0x000000008420c000-0x0000000084269000) (0MB)
EFI: mem59: type=3, attr=0xf, range=[0x0000000084269000-0x0000000084287000) (0MB)
EFI: mem60: type=4, attr=0xf, range=[0x0000000084287000-0x0000000084288000) (0MB)
EFI: mem61: type=3, attr=0xf, range=[0x0000000084288000-0x000000008428b000) (0MB)
EFI: mem62: type=4, attr=0xf, range=[0x000000008428b000-0x000000008428f000) (0MB)
EFI: mem63: type=3, attr=0xf, range=[0x000000008428f000-0x00000000842ba000) (0MB)
EFI: mem64: type=4, attr=0xf, range=[0x00000000842ba000-0x00000000842d1000) (0MB)
EFI: mem65: type=3, attr=0xf, range=[0x00000000842d1000-0x00000000842fa000) (0MB)
EFI: mem66: type=4, attr=0xf, range=[0x00000000842fa000-0x00000000842fd000) (0MB)
EFI: mem67: type=3, attr=0xf, range=[0x00000000842fd000-0x0000000084301000) (0MB)
EFI: mem68: type=4, attr=0xf, range=[0x0000000084301000-0x0000000084305000) (0MB)
EFI: mem69: type=3, attr=0xf, range=[0x0000000084305000-0x000000008432e000) (0MB)
EFI: mem70: type=4, attr=0xf, range=[0x000000008432e000-0x0000000084331000) (0MB)
EFI: mem71: type=3, attr=0xf, range=[0x0000000084331000-0x0000000084365000) (0MB)
EFI: mem72: type=4, attr=0xf, range=[0x0000000084365000-0x0000000084366000) (0MB)
EFI: mem73: type=3, attr=0xf, range=[0x0000000084366000-0x0000000084373000) (0MB)
EFI: mem74: type=4, attr=0xf, range=[0x0000000084373000-0x000000008438d000) (0MB)
EFI: mem75: type=3, attr=0xf, range=[0x000000008438d000-0x0000000084391000) (0MB)
EFI: mem76: type=4, attr=0xf, range=[0x0000000084391000-0x0000000084394000) (0MB)
EFI: mem77: type=3, attr=0xf, range=[0x0000000084394000-0x000000008439d000) (0MB)
EFI: mem78: type=4, attr=0xf, range=[0x000000008439d000-0x00000000843a0000) (0MB)
EFI: mem79: type=3, attr=0xf, range=[0x00000000843a0000-0x00000000843ad000) (0MB)
EFI: mem80: type=4, attr=0xf, range=[0x00000000843ad000-0x00000000843b4000) (0MB)
EFI: mem81: type=3, attr=0xf, range=[0x00000000843b4000-0x00000000843ed000) (0MB)
EFI: mem82: type=4, attr=0xf, range=[0x00000000843ed000-0x0000000084409000) (0MB)
EFI: mem83: type=3, attr=0xf, range=[0x0000000084409000-0x0000000084412000) (0MB)
EFI: mem84: type=4, attr=0xf, range=[0x0000000084412000-0x0000000084415000) (0MB)
EFI: mem85: type=3, attr=0xf, range=[0x0000000084415000-0x000000008441a000) (0MB)
EFI: mem86: type=4, attr=0xf, range=[0x000000008441a000-0x000000008444a000) (0MB)
EFI: mem87: type=3, attr=0xf, range=[0x000000008444a000-0x000000008444f000) (0MB)
EFI: mem88: type=4, attr=0xf, range=[0x000000008444f000-0x0000000084454000) (0MB)
EFI: mem89: type=3, attr=0xf, range=[0x0000000084454000-0x0000000084455000) (0MB)
EFI: mem90: type=4, attr=0xf, range=[0x0000000084455000-0x000000008445a000) (0MB)
EFI: mem91: type=3, attr=0xf, range=[0x000000008445a000-0x000000008446b000) (0MB)
EFI: mem92: type=4, attr=0xf, range=[0x000000008446b000-0x000000008447c000) (0MB)
EFI: mem93: type=3, attr=0xf, range=[0x000000008447c000-0x000000008447f000) (0MB)
EFI: mem94: type=4, attr=0xf, range=[0x000000008447f000-0x0000000084480000) (0MB)
EFI: mem95: type=3, attr=0xf, range=[0x0000000084480000-0x0000000084481000) (0MB)
EFI: mem96: type=4, attr=0xf, range=[0x0000000084481000-0x0000000084482000) (0MB)
EFI: mem97: type=3, attr=0xf, range=[0x0000000084482000-0x0000000084486000) (0MB)
EFI: mem98: type=4, attr=0xf, range=[0x0000000084486000-0x00000000844e2000) (0MB)
EFI: mem99: type=3, attr=0xf, range=[0x00000000844e2000-0x00000000844f5000) (0MB)
EFI: mem100: type=4, attr=0xf, range=[0x00000000844f5000-0x0000000084508000) (0MB)
EFI: mem101: type=3, attr=0xf, range=[0x0000000084508000-0x000000008450a000) (0MB)
EFI: mem102: type=4, attr=0xf, range=[0x000000008450a000-0x000000008450b000) (0MB)
EFI: mem103: type=3, attr=0xf, range=[0x000000008450b000-0x000000008450c000) (0MB)
EFI: mem104: type=4, attr=0xf, range=[0x000000008450c000-0x000000008463c000) (1MB)
EFI: mem105: type=3, attr=0xf, range=[0x000000008463c000-0x0000000084641000) (0MB)
EFI: mem106: type=4, attr=0xf, range=[0x0000000084641000-0x0000000084652000) (0MB)
EFI: mem107: type=3, attr=0xf, range=[0x0000000084652000-0x000000008465c000) (0MB)
EFI: mem108: type=4, attr=0xf, range=[0x000000008465c000-0x000000008466d000) (0MB)
EFI: mem109: type=3, attr=0xf, range=[0x000000008466d000-0x0000000084680000) (0MB)
EFI: mem110: type=4, attr=0xf, range=[0x0000000084680000-0x0000000084683000) (0MB)
EFI: mem111: type=3, attr=0xf, range=[0x0000000084683000-0x000000008468c000) (0MB)
EFI: mem112: type=4, attr=0xf, range=[0x000000008468c000-0x0000000084691000) (0MB)
EFI: mem113: type=3, attr=0xf, range=[0x0000000084691000-0x0000000084692000) (0MB)
EFI: mem114: type=4, attr=0xf, range=[0x0000000084692000-0x0000000084693000) (0MB)
EFI: mem115: type=3, attr=0xf, range=[0x0000000084693000-0x0000000084694000) (0MB)
EFI: mem116: type=4, attr=0xf, range=[0x0000000084694000-0x0000000084695000) (0MB)
EFI: mem117: type=3, attr=0xf, range=[0x0000000084695000-0x000000008469f000) (0MB)
EFI: mem118: type=4, attr=0xf, range=[0x000000008469f000-0x00000000846a0000) (0MB)
EFI: mem119: type=3, attr=0xf, range=[0x00000000846a0000-0x00000000846a1000) (0MB)
EFI: mem120: type=4, attr=0xf, range=[0x00000000846a1000-0x00000000846a4000) (0MB)
EFI: mem121: type=3, attr=0xf, range=[0x00000000846a4000-0x00000000846a6000) (0MB)
EFI: mem122: type=4, attr=0xf, range=[0x00000000846a6000-0x00000000846a8000) (0MB)
EFI: mem123: type=3, attr=0xf, range=[0x00000000846a8000-0x00000000846ab000) (0MB)
EFI: mem124: type=4, attr=0xf, range=[0x00000000846ab000-0x00000000846d7000) (0MB)
EFI: mem125: type=3, attr=0xf, range=[0x00000000846d7000-0x00000000846e1000) (0MB)
EFI: mem126: type=4, attr=0xf, range=[0x00000000846e1000-0x00000000846e9000) (0MB)
EFI: mem127: type=3, attr=0xf, range=[0x00000000846e9000-0x00000000846f8000) (0MB)
EFI: mem128: type=4, attr=0xf, range=[0x00000000846f8000-0x00000000846fb000) (0MB)
EFI: mem129: type=3, attr=0xf, range=[0x00000000846fb000-0x00000000846fc000) (0MB)
EFI: mem130: type=4, attr=0xf, range=[0x00000000846fc000-0x00000000846fe000) (0MB)
EFI: mem131: type=3, attr=0xf, range=[0x00000000846fe000-0x0000000084702000) (0MB)
EFI: mem132: type=4, attr=0xf, range=[0x0000000084702000-0x0000000084705000) (0MB)
EFI: mem133: type=3, attr=0xf, range=[0x0000000084705000-0x000000008470e000) (0MB)
EFI: mem134: type=4, attr=0xf, range=[0x000000008470e000-0x0000000084710000) (0MB)
EFI: mem135: type=3, attr=0xf, range=[0x0000000084710000-0x0000000084713000) (0MB)
EFI: mem136: type=4, attr=0xf, range=[0x0000000084713000-0x0000000084714000) (0MB)
EFI: mem137: type=3, attr=0xf, range=[0x0000000084714000-0x0000000084715000) (0MB)
EFI: mem138: type=4, attr=0xf, range=[0x0000000084715000-0x0000000084717000) (0MB)
EFI: mem139: type=3, attr=0xf, range=[0x0000000084717000-0x0000000084722000) (0MB)
EFI: mem140: type=4, attr=0xf, range=[0x0000000084722000-0x0000000084725000) (0MB)
EFI: mem141: type=3, attr=0xf, range=[0x0000000084725000-0x000000008472b000) (0MB)
EFI: mem142: type=4, attr=0xf, range=[0x000000008472b000-0x000000008472d000) (0MB)
EFI: mem143: type=3, attr=0xf, range=[0x000000008472d000-0x000000008472f000) (0MB)
EFI: mem144: type=4, attr=0xf, range=[0x000000008472f000-0x0000000084731000) (0MB)
EFI: mem145: type=3, attr=0xf, range=[0x0000000084731000-0x0000000084741000) (0MB)
EFI: mem146: type=4, attr=0xf, range=[0x0000000084741000-0x0000000084751000) (0MB)
EFI: mem147: type=3, attr=0xf, range=[0x0000000084751000-0x000000008475b000) (0MB)
EFI: mem148: type=4, attr=0xf, range=[0x000000008475b000-0x0000000084761000) (0MB)
EFI: mem149: type=3, attr=0xf, range=[0x0000000084761000-0x0000000084762000) (0MB)
EFI: mem150: type=4, attr=0xf, range=[0x0000000084762000-0x000000008476f000) (0MB)
EFI: mem151: type=3, attr=0xf, range=[0x000000008476f000-0x000000008477b000) (0MB)
EFI: mem152: type=4, attr=0xf, range=[0x000000008477b000-0x000000008477d000) (0MB)
EFI: mem153: type=3, attr=0xf, range=[0x000000008477d000-0x000000008477e000) (0MB)
EFI: mem154: type=4, attr=0xf, range=[0x000000008477e000-0x000000008477f000) (0MB)
EFI: mem155: type=3, attr=0xf, range=[0x000000008477f000-0x000000008478c000) (0MB)
EFI: mem156: type=4, attr=0xf, range=[0x000000008478c000-0x0000000084794000) (0MB)
EFI: mem157: type=3, attr=0xf, range=[0x0000000084794000-0x00000000847b8000) (0MB)
EFI: mem158: type=4, attr=0xf, range=[0x00000000847b8000-0x00000000847bf000) (0MB)
EFI: mem159: type=3, attr=0xf, range=[0x00000000847bf000-0x00000000847c4000) (0MB)
EFI: mem160: type=4, attr=0xf, range=[0x00000000847c4000-0x00000000847d7000) (0MB)
EFI: mem161: type=3, attr=0xf, range=[0x00000000847d7000-0x00000000847e0000) (0MB)
EFI: mem162: type=4, attr=0xf, range=[0x00000000847e0000-0x0000000084831000) (0MB)
EFI: mem163: type=3, attr=0xf, range=[0x0000000084831000-0x0000000084838000) (0MB)
EFI: mem164: type=4, attr=0xf, range=[0x0000000084838000-0x0000000084842000) (0MB)
EFI: mem165: type=3, attr=0xf, range=[0x0000000084842000-0x0000000084848000) (0MB)
EFI: mem166: type=4, attr=0xf, range=[0x0000000084848000-0x000000008484b000) (0MB)
EFI: mem167: type=3, attr=0xf, range=[0x000000008484b000-0x000000008484d000) (0MB)
EFI: mem168: type=4, attr=0xf, range=[0x000000008484d000-0x000000008484e000) (0MB)
EFI: mem169: type=3, attr=0xf, range=[0x000000008484e000-0x0000000084850000) (0MB)
EFI: mem170: type=4, attr=0xf, range=[0x0000000084850000-0x0000000084851000) (0MB)
EFI: mem171: type=3, attr=0xf, range=[0x0000000084851000-0x0000000084852000) (0MB)
EFI: mem172: type=4, attr=0xf, range=[0x0000000084852000-0x0000000084853000) (0MB)
EFI: mem173: type=3, attr=0xf, range=[0x0000000084853000-0x0000000084860000) (0MB)
EFI: mem174: type=4, attr=0xf, range=[0x0000000084860000-0x0000000084861000) (0MB)
EFI: mem175: type=3, attr=0xf, range=[0x0000000084861000-0x0000000084862000) (0MB)
EFI: mem176: type=4, attr=0xf, range=[0x0000000084862000-0x0000000084863000) (0MB)
EFI: mem177: type=3, attr=0xf, range=[0x0000000084863000-0x0000000084865000) (0MB)
EFI: mem178: type=4, attr=0xf, range=[0x0000000084865000-0x0000000084867000) (0MB)
EFI: mem179: type=3, attr=0xf, range=[0x0000000084867000-0x0000000084868000) (0MB)
EFI: mem180: type=4, attr=0xf, range=[0x0000000084868000-0x0000000084869000) (0MB)
EFI: mem181: type=3, attr=0xf, range=[0x0000000084869000-0x000000008486e000) (0MB)
EFI: mem182: type=4, attr=0xf, range=[0x000000008486e000-0x0000000084871000) (0MB)
EFI: mem183: type=3, attr=0xf, range=[0x0000000084871000-0x0000000084872000) (0MB)
EFI: mem184: type=4, attr=0xf, range=[0x0000000084872000-0x0000000084873000) (0MB)
EFI: mem185: type=3, attr=0xf, range=[0x0000000084873000-0x0000000084874000) (0MB)
EFI: mem186: type=4, attr=0xf, range=[0x0000000084874000-0x0000000084875000) (0MB)
EFI: mem187: type=3, attr=0xf, range=[0x0000000084875000-0x000000008488d000) (0MB)
EFI: mem188: type=4, attr=0xf, range=[0x000000008488d000-0x000000008488e000) (0MB)
EFI: mem189: type=3, attr=0xf, range=[0x000000008488e000-0x0000000084890000) (0MB)
EFI: mem190: type=4, attr=0xf, range=[0x0000000084890000-0x0000000084891000) (0MB)
EFI: mem191: type=3, attr=0xf, range=[0x0000000084891000-0x0000000084893000) (0MB)
EFI: mem192: type=4, attr=0xf, range=[0x0000000084893000-0x0000000084894000) (0MB)
EFI: mem193: type=3, attr=0xf, range=[0x0000000084894000-0x0000000084895000) (0MB)
EFI: mem194: type=4, attr=0xf, range=[0x0000000084895000-0x0000000084896000) (0MB)
EFI: mem195: type=3, attr=0xf, range=[0x0000000084896000-0x00000000848a0000) (0MB)
EFI: mem196: type=4, attr=0xf, range=[0x00000000848a0000-0x0000000084ca0000) (4MB)
EFI: mem197: type=3, attr=0xf, range=[0x0000000084ca0000-0x0000000084cb6000) (0MB)
EFI: mem198: type=4, attr=0xf, range=[0x0000000084cb6000-0x0000000084cba000) (0MB)
EFI: mem199: type=3, attr=0xf, range=[0x0000000084cba000-0x0000000084cc3000) (0MB)
EFI: mem200: type=4, attr=0xf, range=[0x0000000084cc3000-0x0000000084cc6000) (0MB)
EFI: mem201: type=3, attr=0xf, range=[0x0000000084cc6000-0x0000000084cc7000) (0MB)
EFI: mem202: type=4, attr=0xf, range=[0x0000000084cc7000-0x0000000084cc8000) (0MB)
EFI: mem203: type=3, attr=0xf, range=[0x0000000084cc8000-0x0000000084cf2000) (0MB)
EFI: mem204: type=4, attr=0xf, range=[0x0000000084cf2000-0x0000000084cf6000) (0MB)
EFI: mem205: type=3, attr=0xf, range=[0x0000000084cf6000-0x0000000084cf7000) (0MB)
EFI: mem206: type=4, attr=0xf, range=[0x0000000084cf7000-0x0000000084cf8000) (0MB)
EFI: mem207: type=3, attr=0xf, range=[0x0000000084cf8000-0x0000000084cfd000) (0MB)
EFI: mem208: type=4, attr=0xf, range=[0x0000000084cfd000-0x0000000084d01000) (0MB)
EFI: mem209: type=3, attr=0xf, range=[0x0000000084d01000-0x0000000084d07000) (0MB)
EFI: mem210: type=4, attr=0xf, range=[0x0000000084d07000-0x0000000084d08000) (0MB)
EFI: mem211: type=3, attr=0xf, range=[0x0000000084d08000-0x0000000084d09000) (0MB)
EFI: mem212: type=4, attr=0xf, range=[0x0000000084d09000-0x0000000084ef1000) (1MB)
EFI: mem213: type=3, attr=0xf, range=[0x0000000084ef1000-0x0000000084ef3000) (0MB)
EFI: mem214: type=4, attr=0xf, range=[0x0000000084ef3000-0x0000000084ef7000) (0MB)
EFI: mem215: type=3, attr=0xf, range=[0x0000000084ef7000-0x0000000084efa000) (0MB)
EFI: mem216: type=4, attr=0xf, range=[0x0000000084efa000-0x0000000084efb000) (0MB)
EFI: mem217: type=3, attr=0xf, range=[0x0000000084efb000-0x0000000084efc000) (0MB)
EFI: mem218: type=4, attr=0xf, range=[0x0000000084efc000-0x0000000086844000) (25MB)
EFI: mem219: type=10, attr=0xf, range=[0x0000000086844000-0x0000000086845000) (0MB)
EFI: mem220: type=6, attr=0x800000000000000f, range=[0x0000000086845000-0x000000008688f000) (0MB)
EFI: mem221: type=4, attr=0xf, range=[0x000000008688f000-0x00000000868e4000) (0MB)
EFI: mem222: type=6, attr=0x800000000000000f, range=[0x00000000868e4000-0x0000000086d60000) (4MB)
EFI: mem223: type=4, attr=0xf, range=[0x0000000086d60000-0x0000000086d76000) (0MB)
EFI: mem224: type=5, attr=0x800000000000000f, range=[0x0000000086d76000-0x0000000086dcd000) (0MB)
EFI: mem225: type=6, attr=0x800000000000000f, range=[0x0000000086dcd000-0x00000000875c8000) (7MB)
EFI: mem226: type=0, attr=0xf, range=[0x00000000875c8000-0x00000000879ca000) (4MB)
EFI: mem227: type=10, attr=0xf, range=[0x00000000879ca000-0x0000000087f9a000) (5MB)
EFI: mem228: type=9, attr=0xf, range=[0x0000000087f9a000-0x0000000087fcd000) (0MB)
EFI: mem229: type=4, attr=0xf, range=[0x0000000087fcd000-0x0000000088000000) (0MB)
EFI: mem230: type=7, attr=0xf, range=[0x0000000100000000-0x0000000472000000) (14112MB)
EFI: mem231: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
EFI: mem232: type=11, attr=0x8000000000000001, range=[0x00000000fe000000-0x00000000fe011000) (0MB)
EFI: mem233: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
EFI: mem234: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
EFI: mem235: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
SMBIOS version 2.8 @ 0xF05E0
SMBIOS 2.8 present.
DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./H110M-H DDR3-CF, BIOS F3 10/23/2015
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x472000 max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0x88000 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-0000000088000000
0000000000 - 0080000000 page 1G
0080000000 - 0088000000 page 2M
kernel direct mapping tables up to 88000000 @ 10000-12000
Use unified mapping for non-reserved e820 regions.
init_memory_mapping: 0000000100000000-0000000472000000
0100000000 - 0440000000 page 1G
0440000000 - 0472000000 page 2M
kernel direct mapping tables up to 472000000 @ 11000-13000
RAMDISK: 7e97c000 - 7fafaf69
ACPI: Deleted _OSI()
ACPI: Deleted _OSI()
ACPI: RSDP 0000000087bf5000 00024 (v02 ALASKA)
ACPI: XSDT 0000000087bf50a0 000C4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0000000087c17768 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20090903/tbfadt-288)
ACPI: DSDT 0000000087bf5200 22563 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0000000087f99f80 00040
ACPI: APIC 0000000087c17878 000BC (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0000000087c17938 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0000000087c17980 0009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0000000087c17a20 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0000000087c17a60 00038 (v01 ALASKA A M I 01072009 AMI. 0005000B)
ACPI: SSDT 0000000087c17a98 0036D (v01 SataRe SataTabl 00001000 INTL 20120913)
ACPI: SSDT 0000000087c17e08 00490 (v02 Intel PerfTune 00001000 INTL 20120913)
ACPI: SSDT 0000000087c18298 05384 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
ACPI: UEFI 0000000087c1d620 00042 (v01 00000000 00000000)
ACPI: LPIT 0000000087c1d668 00094 (v01 INTEL SKL 00000000 MSFT 0000005F)
ACPI: SSDT 0000000087c1d700 00248 (v02 INTEL sensrhub 00000000 INTL 20120913)
ACPI: SSDT 0000000087c1d948 02BAE (v02 INTEL PtidDevc 00001000 INTL 20120913)
ACPI: SSDT 0000000087c204f8 00C45 (v02 INTEL Ther_Rvp 00001000 INTL 20120913)
ACPI: DBGP 0000000087c21140 00034 (v01 INTEL 00000000 MSFT 0000005F)
ACPI: DBG2 0000000087c21178 00054 (v00 INTEL 00000000 MSFT 0000005F)
ACPI: SSDT 0000000087c211d0 02103 (v02 INTEL xh_rvp10 00000000 INTL 20120913)
ACPI: SSDT 0000000087c232d8 00E58 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
ACPI: BGRT 0000000087c24130 00038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: ASF! 0000000087c24168 000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
No NUMA configuration found
Faking a node at 0000000000000000-0000000472000000
Bootmem setup node 0 0000000000000000-0000000472000000
NODE_DATA [0000000000012000 - 0000000000045fff]
bootmap [0000000000100000 - 000000000018e3ff] pages 8f
(9 early reservations) ==> bootmem [0000000000 - 0472000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0002044924] TEXT DATA BSS ==> [0001000000 - 0002044924]
#3 [007e97c000 - 007fafaf69] RAMDISK ==> [007e97c000 - 007fafaf69]
#4 [000009c800 - 0000100000] BIOS reserved ==> [000009c800 - 0000100000]
#5 [007fffb000 - 007fffdc40] EFI memmap ==> [007fffb000 - 007fffdc40]
#6 [0002045000 - 000204544f] BRK ==> [0002045000 - 000204544f]
#7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
#8 [0000011000 - 0000012000] PGTABLE ==> [0000011000 - 0000012000]
found SMP MP-table at [ffff8800000fcae0] fcae0
Reserving 130MB of memory at 48MB for crashkernel (System RAM: 18208MB)
[ffffea0000000000-ffffea000fbfffff] PMD -> [ffff880028600000-ffff8800367fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00472000
Movable zone start PFN for each node
early_node_map[7] active PFN ranges
0: 0x00000010 -> 0x00000058
0: 0x00000059 -> 0x0000009f
0: 0x00000100 -> 0x00086844
0: 0x0008688f -> 0x000868e4
0: 0x00086d60 -> 0x00086d76
0: 0x00087fcd -> 0x00088000
0: 0x00100000 -> 0x00472000
On node 0 totalpages: 4163696
DMA zone: 56 pages used for memmap
DMA zone: 105 pages reserved
DMA zone: 3821 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 532762 pages, LIFO batch:31
Normal zone: 49392 pages used for memmap
Normal zone: 3563280 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 120
PM: Registered nosave memory: 0000000000058000 - 0000000000059000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 0000000086844000 - 0000000086845000
PM: Registered nosave memory: 0000000086845000 - 000000008688f000
PM: Registered nosave memory: 00000000868e4000 - 0000000086d60000
PM: Registered nosave memory: 0000000086d76000 - 00000000879ca000
PM: Registered nosave memory: 00000000879ca000 - 0000000087f9a000
PM: Registered nosave memory: 0000000087f9a000 - 0000000087fcd000
PM: Registered nosave memory: 0000000088000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
PM: Registered nosave memory: 00000000fe000000 - 00000000fe011000
PM: Registered nosave memory: 00000000fe011000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at 88000000 (gap: 88000000:58000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s96600 r8192 d22184 u262144
pcpu-alloc: s96600 r8192 d22184 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4099863
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/vg_adentrocentos-lv_root rd_NO_LUKS KEYBOARDTYPE=pc KEYTABLE=br-abnt2 LANG=pt_BR.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=130M@0M rd_LVM_LV=vg_adentrocentos/lv_root rd_LVM_LV=vg_adentrocentos/lv_swap rd_NO_DM rhgb quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Memory: 16128692k/18644992k available (5455k kernel code, 1990208k absent, 526092k reserved, 6964k data, 1316k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:2048
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
TSC: PIT calibration matches HPET. 2 loops
Detected 4007.989 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 8015.97 BogoMIPS (lpj=4007989)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 22342 entries in 88 pages
x2apic not enabled, IRQ remapping init failed
APIC routing finalized to flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz stepping 03
Performance Events: PEBS fmt3+, 32-deep LBR, Skylake events, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
Brought up 8 CPUs
Total of 8 processors activated (64127.82 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2672 bytes
devtmpfs: initialized
PM: Registering ACPI NVS region at 86844000 (4096 bytes)
PM: Registering ACPI NVS region at 879ca000 (6094848 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI Error (dswload-0659): [RHUB] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)
ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81ffcf00), AE_NOT_FOUND
ACPI Error (dswload-0659): [I2C0] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)
ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81ffcf00), AE_NOT_FOUND
ACPI Error (dswload-0659): [I2C1] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)
ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81ffcf00), AE_NOT_FOUND
ACPI Error (dswload-0659): [I2C2] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)
ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81ffcf00), AE_NOT_FOUND
ACPI Error (dswload-0659): [I2C3] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)
ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81ffcf00), AE_NOT_FOUND
ACPI Error (dswload-0659): [I2C4] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)
ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81ffcf00), AE_NOT_FOUND
ACPI Error (dswload-0659): [I2C5] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)
ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81ffcf00), AE_NOT_FOUND
ACPI Error (dswload-0659): [SPI0] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)
ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81ffcf00), AE_NOT_FOUND
ACPI Error (dswload-0659): [SPI1] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)
ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81ffcf00), AE_NOT_FOUND
ACPI Error (dswload-0659): [UA00] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)
ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81ffcf00), AE_NOT_FOUND
ACPI Error (dswload-0659): [UA01] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)
ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81ffcf00), AE_NOT_FOUND
ACPI Error (dswload-0659): [UA02] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)
ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81ffcf00), AE_NOT_FOUND
ACPI Error (dswload-0659): [PXSX] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)
ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81ffcf00), AE_NOT_FOUND
ACPI Error (dswload-0659): [PXSX] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)
ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81ffcf00), AE_NOT_FOUND
ACPI Error (dswload-0659): [PXSX] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)
ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81ffcf00), AE_NOT_FOUND
ACPI Error (dswload-0659): [PXSX] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)
ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81ffcf00), AE_NOT_FOUND
ACPI Error (dswload-0659): [PXSX] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)
ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81ffcf00), AE_NOT_FOUND
ACPI Error (dswload-0659): [PXSX] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)
ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81ffcf00), AE_NOT_FOUND
ACPI Error (dswload-0659): [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)
ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81ffcf00), AE_NOT_FOUND
ACPI Error (dswload-0659): [\_SB_.PCI0.XHC_.RHUB.SS07] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)
ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81ffcf00), AE_NOT_FOUND
ACPI: Executed 23 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (off)
ACPI: Skipped creation of duplicate /proc/acpi/power_resource/WRST entry
ACPI: Power Resource [WRST] (off)
ACPI: Skipped creation of duplicate /proc/acpi/power_resource/WRST entry
ACPI: Power Resource [WRST] (off)
ACPI: Skipped creation of duplicate /proc/acpi/power_resource/WRST entry
ACPI: Power Resource [WRST] (off)
ACPI: Skipped creation of duplicate /proc/acpi/power_resource/WRST entry
ACPI: Power Resource [WRST] (off)
ACPI: Skipped creation of duplicate /proc/acpi/power_resource/WRST entry
ACPI: Power Resource [WRST] (off)
ACPI: Skipped creation of duplicate /proc/acpi/power_resource/WRST entry
ACPI: Power Resource [WRST] (off)
ACPI: Skipped creation of duplicate /proc/acpi/power_resource/WRST entry
ACPI: Power Resource [WRST] (off)
ACPI: Skipped creation of duplicate /proc/acpi/power_resource/WRST entry
ACPI: Power Resource [WRST] (off)
ACPI: Skipped creation of duplicate /proc/acpi/power_resource/WRST entry
ACPI: Power Resource [WRST] (off)
ACPI: Skipped creation of duplicate /proc/acpi/power_resource/WRST entry
ACPI: Power Resource [WRST] (off)
ACPI: Skipped creation of duplicate /proc/acpi/power_resource/WRST entry
ACPI: Power Resource [WRST] (off)
ACPI: Skipped creation of duplicate /proc/acpi/power_resource/WRST entry
ACPI: Power Resource [WRST] (off)
ACPI: Skipped creation of duplicate /proc/acpi/power_resource/WRST entry
ACPI: Power Resource [WRST] (off)
ACPI: Skipped creation of duplicate /proc/acpi/power_resource/WRST entry
ACPI: Power Resource [WRST] (off)
ACPI: Skipped creation of duplicate /proc/acpi/power_resource/WRST entry
ACPI: Power Resource [WRST] (off)
ACPI: Skipped creation of duplicate /proc/acpi/power_resource/WRST entry
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x8d000000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xfd000000-0xfe7fffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x8d000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff]
pci 0000:00:02.0: reg 10: [mem 0xde000000-0xdeffffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
pci 0000:00:14.0: reg 10: [mem 0xdf110000-0xdf11ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: PME# disabled
pci 0000:00:14.2: reg 10: [mem 0xdf12e000-0xdf12efff 64bit]
pci 0000:00:16.0: reg 10: [mem 0xdf12d000-0xdf12dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:16.0: PME# disabled
pci 0000:00:17.0: reg 10: [mem 0xdf128000-0xdf129fff]
pci 0000:00:17.0: reg 14: [mem 0xdf12c000-0xdf12c0ff]
pci 0000:00:17.0: reg 18: [io 0xf090-0xf097]
pci 0000:00:17.0: reg 1c: [io 0xf080-0xf083]
pci 0000:00:17.0: reg 20: [io 0xf060-0xf07f]
pci 0000:00:17.0: reg 24: [mem 0xdf12b000-0xdf12b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:17.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [mem 0xdf124000-0xdf127fff]
pci 0000:00:1f.3: reg 10: [mem 0xdf120000-0xdf123fff 64bit]
pci 0000:00:1f.3: reg 20: [mem 0xdf100000-0xdf10ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.3: PME# disabled
pci 0000:00:1f.4: reg 10: [mem 0xdf12a000-0xdf12a0ff 64bit]
pci 0000:00:1f.4: reg 20: [io 0xf040-0xf05f]
pci 0000:01:00.0: reg 10: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 18: [mem 0xdf000000-0xdf000fff 64bit]
pci 0000:01:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xdf000000-0xdf0fffff]
pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:1d.0: PCI bridge to [bus 02-02]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP09._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
alloc irq_desc for 120 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 121 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 122 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 123 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 124 on node -1
alloc kstat_irqs on node -1
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 120, 121, 122, 123, 124, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
hpet: hpet2 irq 120 for MSI
hpet: hpet3 irq 121 for MSI
hpet: hpet4 irq 122 for MSI
hpet: hpet5 irq 123 for MSI
hpet: hpet6 irq 124 for MSI
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:01: [io 0x0a00-0x0a2f]
pnp 00:01: [io 0x0a30-0x0a3f]
pnp 00:01: [io 0x0a40-0x0a4f]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x0060]
pnp 00:02: [io 0x0064]
pnp 00:02: [irq 1]
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:03: [irq 12]
pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:04: [mem 0xff000000-0xffffffff]
pnp 00:04: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:05: [mem 0xfed00000-0xfed003ff]
pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:06: [io 0x00f0]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io 0x002e-0x002f]
pnp 00:07: [io 0x004e-0x004f]
pnp 00:07: [io 0x0061]
pnp 00:07: [io 0x0063]
pnp 00:07: [io 0x0065]
pnp 00:07: [io 0x0067]
pnp 00:07: [io 0x0070]
pnp 00:07: [io 0x0080]
pnp 00:07: [io 0x0092]
pnp 00:07: [io 0x00b2-0x00b3]
pnp 00:07: [io 0x0680-0x069f]
pnp 00:07: [io 0xffff]
pnp 00:07: [io 0xffff]
pnp 00:07: [io 0xffff]
pnp 00:07: [io 0x1800-0x18fe]
pnp 00:07: [io 0x164e-0x164f]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io 0x0800-0x087f]
pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io 0x0070-0x0077]
pnp 00:09: [irq 8]
pnp 00:09: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:0a: [io 0x1854-0x1857]
pnp 00:0a: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:0b: [mem 0xfed10000-0xfed17fff]
pnp 00:0b: [mem 0xfed18000-0xfed18fff]
pnp 00:0b: [mem 0xfed19000-0xfed19fff]
pnp 00:0b: [mem 0xe0000000-0xefffffff]
pnp 00:0b: [mem 0xfed20000-0xfed3ffff]
pnp 00:0b: [mem 0xfed90000-0xfed93fff]
pnp 00:0b: [mem 0xfed45000-0xfed8ffff]
pnp 00:0b: [mem 0xff000000-0xffffffff]
pnp 00:0b: [mem 0xfee00000-0xfeefffff]
pnp 00:0b: [mem 0xdffe0000-0xdfffffff]
pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0xfd000000-0xfdabffff]
pnp 00:0c: [mem 0xfdad0000-0xfdadffff]
pnp 00:0c: [mem 0xfdb00000-0xfdffffff]
pnp 00:0c: [mem 0xfe000000-0xfe01ffff]
pnp 00:0c: [mem 0xfe036000-0xfe03bfff]
pnp 00:0c: [mem 0xfe03d000-0xfe3fffff]
pnp 00:0c: [mem 0xfe410000-0xfe7fffff]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0xfdaf0000-0xfdafffff]
pnp 00:0d: [mem 0xfdae0000-0xfdaeffff]
pnp 00:0d: [mem 0xfdac0000-0xfdacffff]
pnp 00:0d: IRQ 14 override to edge, high
pnp 00:0d: [irq 14]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [io 0x0a00-0x0a2f] has been reserved
system 00:01: [io 0x0a30-0x0a3f] has been reserved
system 00:01: [io 0x0a40-0x0a4f] has been reserved
system 00:07: [io 0x0680-0x069f] has been reserved
system 00:07: [io 0xffff] has been reserved
system 00:07: [io 0xffff] has been reserved
system 00:07: [io 0xffff] has been reserved
system 00:07: [io 0x1800-0x18fe] has been reserved
system 00:07: [io 0x164e-0x164f] has been reserved
system 00:08: [io 0x0800-0x087f] has been reserved
system 00:0a: [io 0x1854-0x1857] has been reserved
system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0b: [mem 0xdffe0000-0xdfffffff] has been reserved
system 00:0c: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:0c: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:0c: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:0c: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:0c: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:0c: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:0c: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:0d: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:0d: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:0d: [mem 0xfdac0000-0xfdacffff] has been reserved
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xdf000000-0xdf0fffff]
pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:1d.0: PCI bridge to [bus 02-02]
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1d.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x8d000000-0xdfffffff]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xdf000000-0xdf0fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
pci 0000:00:14.0: power state changed by ACPI to D0
pci 0000:00:14.0: power state changed by ACPI to D0
pci 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:14.0: PCI INT A disabled
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17915k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
sha256_ssse3: Using AVX optimized SHA-256 implementation
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink socket (disabled)
type=2000 audit(1472494706.417:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 31652
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 2163146EC4595AB0
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 125 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 125 for MSI/MSI-X
pcieport 0000:00:1d.0: setting latency timer to 64
alloc irq_desc for 126 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1d.0: irq 126 for MSI/MSI-X
aer 0000:00:1c.0:pcie02: service driver aer loaded
aer 0000:00:1d.0:pcie02: service driver aer loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, mapped to 0xffffc90023700000, using 1876k, total 1875k
efifb: mode is 800x600x32, linelength=3200, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 100x37
fb0: EFI VGA frame buffer device
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idleACPI: SSDT 000000008791dc18 0037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: SSDT 000000008791e818 007AA (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
ACPI: SSDT 000000008791d618 005AA (v02 PmRef ApIst 00003000 INTL 20120913)
ACPI: SSDT 0000000087920c18 00119 (v02 PmRef ApCst 00003000 INTL 20120913)
[Firmware Bug]: No valid trip found
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input3
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:09: RTC can wake from S4
rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:09: setting system clock to 2016-08-29 18:18:27 UTC (1472494707)
Initalizing network drop monitor service
Freeing unused kernel memory: 1316k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 668k freed
Freeing unused kernel memory: 1556k freed
dracut: dracut-004-409.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.1-ioctl (2015-8-18) initialised: dm-devel@redhat.com
udev: starting version 147
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: firmware: requesting i915/skl_dmc_ver1.bin
[drm] Memory usable by graphics device = 4096M
checking generic (c0000000 1d5000) vs hw (c0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: setting latency timer to 64
alloc irq_desc for 127 on node -1
alloc kstat_irqs on node -1
i915 0000:00:02.0: irq 127 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] failed to retrieve link info, disabling eDP
i915 0000:00:02.0: firmware: requesting i915/skl_guc_ver4.bin
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:0f: registered as cooling_device13
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
i915 0000:00:02.0: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
ACPI: WMI: Mapper loaded
dracut: Starting plymouth daemon
Refined TSC clocksource calibration: 4008.012 MHz.
Switching to clocksource tsc
dracut: rd_NO_MD: removing MD RAID activation
xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
xhci_hcd 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
alloc irq_desc for 128 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:00:14.0: irq 128 for MSI/MSI-X
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-642.el6.x86_64 xhci_hcd
usb usb1: SerialNumber: 0000:00:14.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-642.el6.x86_64 xhci_hcd
usb usb2: SerialNumber: 0000:00:14.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
alloc irq_desc for 129 on node -1
alloc kstat_irqs on node -1
ahci 0000:00:17.0: irq 129 for MSI/MSI-X
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems apst
ahci 0000:00:17.0: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m2048@0xdf12b000 port 0xdf12b100 irq 129
ata2: SATA max UDMA/133 abar m2048@0xdf12b000 port 0xdf12b180 irq 129
ata3: SATA max UDMA/133 abar m2048@0xdf12b000 port 0xdf12b200 irq 129
ata4: SATA max UDMA/133 abar m2048@0xdf12b000 port 0xdf12b280 irq 129
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
ata1.00: ATA-9: WDC WD20EZRX-00D8PB0, 80.00A80, max UDMA/133
ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4: SATA link down (SStatus 4 SControl 300)
ata1.00: configured for UDMA/133
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
scsi 0:0:0:0: Direct-Access ATA WDC WD20EZRX-00D 0A80 PQ: 0 ANSI: 5
ata3.00: ATAPI: Optiarc DVD RW AD-7260S, 1.03, max UDMA/100, ATAPI AN
ata3.00: configured for UDMA/100
scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7260S 1.03 PQ: 0 ANSI: 5
usb 1-7: new high speed USB device number 2 using xhci_hcd
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
dracut: Scanning devices sda3 for LVM logical volumes vg_adentrocentos/lv_root vg_adentrocentos/lv_swap
dracut: inactive '/dev/vg_adentrocentos/lv_root' [50.00 GiB] inherit
dracut: inactive '/dev/vg_adentrocentos/lv_home' [1.76 TiB] inherit
dracut: inactive '/dev/vg_adentrocentos/lv_swap' [7.80 GiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/vg_adentrocentos-lv_root
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
[drm] RC6 on
type=1404 audit(1472494709.698:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
usb-storage: device scan complete
scsi 4:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 4:0:0:0: [sdb] Attached SCSI removable disk
udev: starting version 147
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 2:0:0:0: Attached scsi generic sg1 type 5
sd 4:0:0:0: Attached scsi generic sg2 type 0
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
r8169 0000:01:00.0: setting latency timer to 64
alloc irq_desc for 130 on node -1
alloc kstat_irqs on node -1
r8169 0000:01:00.0: irq 130 for MSI/MSI-X
r8169 0000:01:00.0: eth0: RTL8168g/8111g at 0xffffc900100d6000, fc:aa:14:fd:33:89, XID 0c000800 IRQ 130
r8169 0000:01:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1f.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
alloc irq_desc for 131 on node -1
alloc kstat_irqs on node -1
snd_hda_intel 0000:00:1f.3: irq 131 for MSI/MSI-X
i801_smbus 0000:00:1f.4: enabling device (0001 -> 0003)
i801_smbus 0000:00:1f.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20090903/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sound hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: dig-out=0x11/0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Front Mic=0x19
sound hdaudioC0D0: Rear Mic=0x18
sound hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
Adding 8175612k swap on /dev/mapper/vg_adentrocentos-lv_swap. Priority:-1 extents:1 across:8175612k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
type=1305 audit(1472494713.531:3): audit_pid=1570 old=0 auid=4294967295 ses=4294967295 res=1
usb 1-4: new low speed USB device number 3 using xhci_hcd
usb 1-4: New USB device found, idVendor=046d, idProduct=c31c
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: USB Keyboard
usb 1-4: Manufacturer: Logitech
usb 1-4: configuration #1 chosen from 1 choice
usb 1-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-4: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input13
generic-usb 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-4/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/input/input14
generic-usb 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-4/input1
usb 1-3: new low speed USB device number 4 using xhci_hcd
usb 1-3: New USB device found, idVendor=1a2c, idProduct=0042
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3: Product: Usb Mouse
usb 1-3: Manufacturer: SEMICCHIP
usb 1-3: configuration #1 chosen from 1 choice
usb 1-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: SEMICCHIP Usb Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input15
generic-usb 0003:1A2C:0042.0003: input,hidraw2: USB HID v1.10 Mouse [SEMICCHIP Usb Mouse] on usb-0000:00:14.0-3/input0
r8169 0000:01:00.0: firmware: requesting rtl_nic/rtl8168g-2.fw
r8169 0000:01:00.0: eth0: link down
r8169 0000:01:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:01:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
usb 1-3: USB disconnect, device number 4
usb 1-4: USB disconnect, device number 3
r8169 0000:01:00.0: eth0: link down
r8169 0000:01:00.0: eth0: link up
ip_tables: (C) 2000-2006 Netfilter Core Team
r8169 0000:01:00.0: eth0: link down
r8169 0000:01:00.0: eth0: link up
usb 1-7: USB disconnect, device number 2
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 6 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 5:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 5:0:0:0: Attached scsi generic sg2 type 0
sd 5:0:0:0: [sdb] Attached SCSI removable disk
usb 1-7: USB disconnect, device number 6
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 8 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 8
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 6:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdb] Attached SCSI removable disk
usb 1-7: USB disconnect, device number 8
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 10 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi7 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 10
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 7:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 7:0:0:0: Attached scsi generic sg2 type 0
sd 7:0:0:0: [sdb] Attached SCSI removable disk
usb 1-7: USB disconnect, device number 10
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 12 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi8 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 12
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 8:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 8:0:0:0: Attached scsi generic sg2 type 0
sd 8:0:0:0: [sdb] Attached SCSI removable disk
usb 1-7: USB disconnect, device number 12
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 14 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi9 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 14
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 9:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 9:0:0:0: Attached scsi generic sg2 type 0
sd 9:0:0:0: [sdb] Attached SCSI removable disk
usb 1-7: USB disconnect, device number 14
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 16 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi10 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 16
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 10:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 10:0:0:0: Attached scsi generic sg2 type 0
sd 10:0:0:0: [sdb] Attached SCSI removable disk
usb 1-7: USB disconnect, device number 16
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 18 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi11 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 18
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 11:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 11:0:0:0: Attached scsi generic sg2 type 0
sd 11:0:0:0: [sdb] Attached SCSI removable disk
usb 1-7: USB disconnect, device number 18
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 20 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi12 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 20
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 12:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 12:0:0:0: Attached scsi generic sg2 type 0
sd 12:0:0:0: [sdb] Attached SCSI removable disk
usb 1-7: USB disconnect, device number 20
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 22 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi13 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 22
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 13:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 13:0:0:0: Attached scsi generic sg2 type 0
sd 13:0:0:0: [sdb] Attached SCSI removable disk
usb 1-7: USB disconnect, device number 22
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 24 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi14 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 24
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 14:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 14:0:0:0: Attached scsi generic sg2 type 0
sd 14:0:0:0: [sdb] Attached SCSI removable disk
usb 1-7: USB disconnect, device number 24
hub 1-0:1.0: unable to enumerate USB device on port 7
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 27 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi15 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 27
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 15:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 15:0:0:0: Attached scsi generic sg2 type 0
sd 15:0:0:0: [sdb] Attached SCSI removable disk
usb 1-7: USB disconnect, device number 27
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 29 using xhci_hcd
hub 1-0:1.0: unable to enumerate USB device on port 7
hub 1-0:1.0: unable to enumerate USB device on port 7
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 32 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi16 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 32
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
usb 1-7: reset high speed USB device number 32 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 31.
usb 1-7: USB disconnect, device number 32
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880469cab780
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880469cab7c8
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 34 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi17 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 34
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 17:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 17:0:0:0: Attached scsi generic sg2 type 0
sd 17:0:0:0: [sdb] Attached SCSI removable disk
usb 1-7: USB disconnect, device number 34
usb 1-7: new full speed USB device number 35 using xhci_hcd
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new full speed USB device number 36 using xhci_hcd
hub 1-0:1.0: unable to enumerate USB device on port 7
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 38 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi18 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 38
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 18:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 18:0:0:0: Attached scsi generic sg2 type 0
sd 18:0:0:0: [sdb] Attached SCSI removable disk
usb 1-7: USB disconnect, device number 38
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 40 using xhci_hcd
usb 1-7: Device not responding to setup address.
usb 1-7: Device not responding to setup address.
usb 1-7: device not accepting address 40, error -71
hub 1-0:1.0: unable to enumerate USB device on port 7
hub 1-0:1.0: unable to enumerate USB device on port 7
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 44 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi19 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 44
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
usb 1-7: reset high speed USB device number 44 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 43.
usb 1-7: USB disconnect, device number 44
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88046b793500
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88046b793548
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 46 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi20 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 46
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
usb 1-7: reset high speed USB device number 46 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 45.
usb 1-7: USB disconnect, device number 46
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880466951980
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804669519c8
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 48 using xhci_hcd
usb 1-7: Device not responding to setup address.
usb 1-7: Device not responding to setup address.
usb 1-7: device not accepting address 48, error -71
hub 1-0:1.0: unable to enumerate USB device on port 7
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 51 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi21 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 51
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 21:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 21:0:0:0: Attached scsi generic sg2 type 0
sd 21:0:0:0: [sdb] Attached SCSI removable disk
usb 1-7: USB disconnect, device number 51
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 53 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi22 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 53
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 22:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 22:0:0:0: Attached scsi generic sg2 type 0
sd 22:0:0:0: [sdb] Attached SCSI removable disk
usb 1-7: USB disconnect, device number 53
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 55 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi23 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 55
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 23:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 23:0:0:0: Attached scsi generic sg2 type 0
sd 23:0:0:0: [sdb] Attached SCSI removable disk
usb 1-7: USB disconnect, device number 55
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 57 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi24 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 57
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
usb 1-7: reset high speed USB device number 57 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 56.
usb 1-7: USB disconnect, device number 57
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88046a080c00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88046a080c48
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 59 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: configuration #1 chosen from 1 choice
usb 1-7: can't set config #1, error -71
usb 1-7: USB disconnect, device number 59
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 61 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi25 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 61
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 25:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 25:0:0:0: Attached scsi generic sg2 type 0
sd 25:0:0:0: [sdb] Attached SCSI removable disk
usb 1-7: USB disconnect, device number 61
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 63 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi26 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 63
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 26:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 26:0:0:0: Attached scsi generic sg2 type 0
sd 26:0:0:0: [sdb] Attached SCSI removable disk
usb 1-7: USB disconnect, device number 63
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 65 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi27 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 65
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 27:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 27:0:0:0: Attached scsi generic sg2 type 0
sd 27:0:0:0: [sdb] Attached SCSI removable disk
usb 1-7: USB disconnect, device number 65
hub 1-0:1.0: unable to enumerate USB device on port 7
hub 1-0:1.0: unable to enumerate USB device on port 7
hub 1-0:1.0: unable to enumerate USB device on port 7
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 70 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi28 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 70
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
usb 1-7: reset high speed USB device number 70 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5.
usb 1-7: USB disconnect, device number 70
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804669518c0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880466951908
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 72 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi29 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 72
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 29:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 29:0:0:0: Attached scsi generic sg2 type 0
sd 29:0:0:0: [sdb] Attached SCSI removable disk
usb 1-7: USB disconnect, device number 72
usb 1-7: new full speed USB device number 73 using xhci_hcd
hub 1-0:1.0: unable to enumerate USB device on port 7
hub 1-0:1.0: unable to enumerate USB device on port 7
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 76 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi30 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 76
usb-storage: waiting for device to settle before scanning
usb 1-7: USB disconnect, device number 76
usb 1-7: new full speed USB device number 77 using xhci_hcd
hub 1-0:1.0: unable to enumerate USB device on port 7
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 79 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi31 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 79
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 31:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 31:0:0:0: Attached scsi generic sg2 type 0
sd 31:0:0:0: [sdb] Attached SCSI removable disk
usb 1-7: USB disconnect, device number 79
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 81 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi32 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 81
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
usb 1-7: reset high speed USB device number 81 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 16.
usb 1-7: USB disconnect, device number 81
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88046a1fb240
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88046a1fb288
usb 1-7: new full speed USB device number 82 using xhci_hcd
hub 1-0:1.0: unable to enumerate USB device on port 7
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 84 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi33 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 84
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 33:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 33:0:0:0: Attached scsi generic sg2 type 0
sd 33:0:0:0: [sdb] Attached SCSI removable disk
usb 1-7: USB disconnect, device number 84
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 86 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi34 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 86
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 34:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 34:0:0:0: Attached scsi generic sg2 type 0
sd 34:0:0:0: [sdb] Attached SCSI removable disk
usb 1-7: USB disconnect, device number 86
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 88 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi35 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 88
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 35:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 35:0:0:0: Attached scsi generic sg2 type 0
sd 35:0:0:0: [sdb] Attached SCSI removable disk
usb 1-7: USB disconnect, device number 88
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 90 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi36 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 90
usb-storage: waiting for device to settle before scanning
usb 1-7: USB disconnect, device number 90
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 92 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi37 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 92
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
usb 1-7: reset high speed USB device number 92 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 27.
usb 1-7: USB disconnect, device number 92
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804651e8080
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804651e80c8
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 94 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi38 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 94
usb-storage: waiting for device to settle before scanning
usb 1-7: USB disconnect, device number 94
hub 1-0:1.0: unable to enumerate USB device on port 7
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 97 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi39 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 97
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 39:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 39:0:0:0: Attached scsi generic sg2 type 0
sd 39:0:0:0: [sdb] Attached SCSI removable disk
usb 1-7: USB disconnect, device number 97
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 99 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi40 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 99
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 40:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 40:0:0:0: Attached scsi generic sg2 type 0
sd 40:0:0:0: [sdb] Attached SCSI removable disk
usb 1-7: USB disconnect, device number 99
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 101 using xhci_hcd
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new full speed USB device number 102 using xhci_hcd
usb 1-7: device descriptor read/64, error -71
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 37.
hub 1-0:1.0: unable to enumerate USB device on port 7
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new full speed USB device number 105 using xhci_hcd
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 106 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi41 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 106
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 41:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 41:0:0:0: Attached scsi generic sg2 type 0
sd 41:0:0:0: [sdb] Attached SCSI removable disk
usb 1-7: USB disconnect, device number 106
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 108 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi42 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 108
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 42:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 42:0:0:0: Attached scsi generic sg2 type 0
sd 42:0:0:0: [sdb] Attached SCSI removable disk
usb 1-7: USB disconnect, device number 108
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 110 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi43 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 110
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 43:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 43:0:0:0: Attached scsi generic sg2 type 0
sd 43:0:0:0: [sdb] Attached SCSI removable disk
usb 1-7: USB disconnect, device number 110
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 112 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi44 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 112
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 44:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 44:0:0:0: Attached scsi generic sg2 type 0
sd 44:0:0:0: [sdb] Attached SCSI removable disk
usb 1-7: USB disconnect, device number 112
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 114 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi45 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 114
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 45:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 45:0:0:0: Attached scsi generic sg2 type 0
sd 45:0:0:0: [sdb] Attached SCSI removable disk
usb 1-7: USB disconnect, device number 114
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 116 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi46 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 116
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 46:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 46:0:0:0: Attached scsi generic sg2 type 0
sd 46:0:0:0: [sdb] Attached SCSI removable disk
usb 1-7: USB disconnect, device number 116
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 118 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi47 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 118
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 47:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 47:0:0:0: Attached scsi generic sg2 type 0
sd 47:0:0:0: [sdb] Attached SCSI removable disk
usb 1-7: USB disconnect, device number 118
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 120 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi48 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 120
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
usb 1-7: reset high speed USB device number 120 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 55.
usb 1-7: USB disconnect, device number 120
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804683c1680
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804683c16c8
usb 1-7: new full speed USB device number 121 using xhci_hcd
hub 1-0:1.0: unable to enumerate USB device on port 7
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 123 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi49 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 123
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 49:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 49:0:0:0: Attached scsi generic sg2 type 0
sd 49:0:0:0: [sdb] Attached SCSI removable disk
usb 1-7: USB disconnect, device number 123
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 125 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi50 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 125
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 50:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 50:0:0:0: Attached scsi generic sg2 type 0
sd 50:0:0:0: [sdb] Attached SCSI removable disk
usb 1-7: USB disconnect, device number 125
hub 1-0:1.0: unable to enumerate USB device on port 7
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new full speed USB device number 2 using xhci_hcd
hub 1-0:1.0: unable to enumerate USB device on port 7
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 1-7: new high speed USB device number 4 using xhci_hcd
usb 1-7: New USB device found, idVendor=14cd, idProduct=125c
usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 125C20100726
usb 1-7: configuration #1 chosen from 1 choice
scsi51 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
usb 1-7: reset high speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
usb 1-7: USB disconnect, device number 4
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88046a1fbc00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88046a1fbc48