dmesg - AIOSTRESS
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-642.3.1.el6.x86_64 (mockbuild@worker1.bsys.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-17) (GCC) ) #1 SMP Tue Jul 12 18:30:56 UTC 2016
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dfffe000 (usable)
BIOS-e820: 00000000dfffe000 - 00000000e0000000 (reserved)
BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
SMBIOS version 2.4 @ 0xF1A60
SMBIOS 2.4 present.
DMI: DigitalOcean Droplet, BIOS 20160425 04/25/2016
Hypervisor detected: KVM
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x120000 max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xdfffe max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000dfffe000
0000000000 - 00c0000000 page 1G
00c0000000 - 00dfe00000 page 2M
00dfe00000 - 00dfffe000 page 4k
kernel direct mapping tables up to dfffe000 @ 8000-b000
Use unified mapping for non-reserved e820 regions.
init_memory_mapping: 0000000100000000-0000000120000000
0100000000 - 0120000000 page 2M
kernel direct mapping tables up to 120000000 @ a000-c000
RAMDISK: 36d6e000 - 37fef487
ACPI: Deleted _OSI()
ACPI: Deleted _OSI()
ACPI: RSDP 00000000000f1890 00014 (v00 BOCHS )
ACPI: RSDT 00000000dfffe3f0 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
ACPI: FACP 00000000dfffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
ACPI: DSDT 00000000dfffe430 01137 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001)
ACPI: FACS 00000000dfffff40 00040
ACPI: SSDT 00000000dffff6a0 00899 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
ACPI: APIC 00000000dffff5b0 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
ACPI: HPET 00000000dffff570 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
No NUMA configuration found
Faking a node at 0000000000000000-0000000120000000
Bootmem setup node 0 0000000000000000-0000000120000000
NODE_DATA [000000000000b000 - 000000000003efff]
bootmap [000000000003f000 - 0000000000062fff] pages 24
(8 early reservations) ==> bootmem [0000000000 - 0120000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0002044924] TEXT DATA BSS ==> [0001000000 - 0002044924]
#3 [0036d6e000 - 0037fef487] RAMDISK ==> [0036d6e000 - 0037fef487]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [0002045000 - 00020450c1] BRK ==> [0002045000 - 00020450c1]
#6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
#7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000]
found SMP MP-table at [ffff8800000f1a80] f1a80
Reserving 129MB of memory at 48MB for crashkernel (System RAM: 4608MB)
kvm-clock: Using msrs 4b564d01 and 4b564d00
kvm-clock: cpu 0, msr 0:1c38e41, boot clock
[ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00120000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x0000009f
0: 0x00000100 -> 0x000dfffe
0: 0x00100000 -> 0x00120000
On node 0 totalpages: 1048476
DMA zone: 56 pages used for memmap
DMA zone: 102 pages reserved
DMA zone: 3840 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 899126 pages, LIFO batch:31
Normal zone: 1792 pages used for memmap
Normal zone: 129280 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xb008
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000dfffe000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000feffc000
PM: Registered nosave memory: 00000000feffc000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 00000000fffc0000
PM: Registered nosave memory: 00000000fffc0000 - 0000000100000000
Allocating PCI resources starting at e0000000 (gap: e0000000:1effc000)
Booting paravirtualized kernel on KVM
NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s96600 r8192 d22184 u1048576
pcpu-alloc: s96600 r8192 d22184 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
kvm-clock: cpu 0, msr 0:28216e41, primary cpu clock
kvm-stealtime: cpu 0, msr 2820ed00
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032246
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Memory: 3899996k/4718592k available (5454k kernel code, 524688k absent, 293908k reserved, 6964k data, 1316k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:424
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Detected 1799.998 MHz processor.
Calibrating delay loop (skipped) preset value.. 3599.99 BogoMIPS (lpj=1799998)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
mce: CPU supports 10 MCE banks
alternatives: switching to unfair spinlock
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 22343 entries in 88 pages
Enabling x2apic
Enabled x2apic
APIC routing finalized to physical x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5-2650L v3 @ 1.80GHz stepping 02
Performance Events: 16-deep LBR, Haswell events, Intel PMU driver.
... version: 2
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog disabled (cpu0): hardware events not enabled
Booting Node 0, Processors #1 Ok.
kvm-clock: cpu 1, msr 0:28316e41, secondary cpu clock
kvm-stealtime: cpu 1, msr 2830ed00
Brought up 2 CPUs
Total of 2 processors activated (7199.99 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2672 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
NMI watchdog disabled (cpu0): hardware events not enabled
PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff]
pci 0000:00:01.1: reg 20: [io 0xc100-0xc10f]
pci 0000:00:01.2: reg 20: [io 0xc080-0xc09f]
pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfdffffff pref]
pci 0000:00:02.0: reg 14: [mem 0xfebd0000-0xfebd0fff]
pci 0000:00:02.0: reg 30: [mem 0xfebc0000-0xfebcffff pref]
pci 0000:00:03.0: reg 10: [io 0xc0a0-0xc0bf]
pci 0000:00:03.0: reg 14: [mem 0xfebd1000-0xfebd1fff]
pci 0000:00:03.0: reg 30: [mem 0xfeb40000-0xfeb7ffff pref]
pci 0000:00:04.0: reg 10: [io 0xc0c0-0xc0df]
pci 0000:00:04.0: reg 14: [mem 0xfebd2000-0xfebd2fff]
pci 0000:00:04.0: reg 30: [mem 0xfeb80000-0xfebbffff pref]
pci 0000:00:05.0: reg 10: [io 0xc000-0xc03f]
pci 0000:00:05.0: reg 14: [mem 0xfebd3000-0xfebd3fff]
pci 0000:00:06.0: reg 10: [io 0xc040-0xc07f]
pci 0000:00:06.0: reg 14: [mem 0xfebd4000-0xfebd4fff]
pci 0000:00:07.0: reg 10: [io 0xc0e0-0xc0ff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 100.000000 MHz counter
Switching to clocksource kvm-clock
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io 0x0070-0x0071]
pnp 00:01: [irq 8]
pnp 00:01: [io 0x0072-0x0077]
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: [io 0x0060]
pnp 00:02: [io 0x0064]
pnp 00:02: [irq 1]
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: [irq 12]
pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:04: [io 0x03f2-0x03f5]
pnp 00:04: [io 0x03f7]
pnp 00:04: [irq 6]
pnp 00:04: [dma 2]
pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:05: [io 0x03f8-0x03ff]
pnp 00:05: [irq 4]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: [mem 0xfed00000-0xfed003ff]
pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 7 devices
ACPI: ACPI bus type pnp unregistered
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
pci 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
pci 0000:00:01.2: PCI INT D disabled
pci 0000:00:02.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18949k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
sha256_ssse3: Using AVX optimized SHA-256 implementation
futex hash table entries: 512 (order: 3, 32768 bytes)
audit: initializing netlink socket (disabled)
type=2000 audit(1472590965.646:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7654
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 42D64CB966E51095
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
acpiphp: Slot [9] registered
acpiphp: Slot [10] registered
acpiphp: Slot [11] registered
acpiphp: Slot [12] registered
acpiphp: Slot [13] registered
acpiphp: Slot [14] registered
acpiphp: Slot [15] registered
acpiphp: Slot [16] registered
acpiphp: Slot [17] registered
acpiphp: Slot [18] registered
acpiphp: Slot [19] registered
acpiphp: Slot [20] registered
acpiphp: Slot [21] registered
acpiphp: Slot [22] registered
acpiphp: Slot [23] registered
acpiphp: Slot [24] registered
acpiphp: Slot [25] registered
acpiphp: Slot [26] registered
acpiphp: Slot [27] registered
acpiphp: Slot [28] registered
acpiphp: Slot [29] registered
acpiphp: Slot [30] registered
acpiphp: Slot [31] registered
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
[Firmware Bug]: No valid trip found
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
uhci_hcd 0000:00:01.2: setting latency timer to 64
uhci_hcd 0000:00:01.2: UHCI Host Controller
uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c080
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-642.3.1.el6.x86_64 uhci_hcd
usb usb1: SerialNumber: 0000:00:01.2
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:01: setting system clock to 2016-08-30 21:02:45 UTC (1472590965)
Initalizing network drop monitor service
Freeing unused kernel memory: 1316k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 672k freed
Freeing unused kernel memory: 1556k freed
dracut: dracut-004-409.el6_8.2
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.1-ioctl (2015-8-18) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_MD: removing MD RAID activation
ata_piix 0000:00:01.1: version 2.13
ata_piix 0000:00:01.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc100 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc108 irq 15
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, high) -> IRQ 10
virtio-pci 0000:00:03.0: setting latency timer to 64
virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
virtio-pci 0000:00:04.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
virtio-pci 0000:00:05.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
virtio-pci 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, high) -> IRQ 11
virtio-pci 0000:00:06.0: setting latency timer to 64
virtio-pci 0000:00:07.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, high) -> IRQ 10
virtio-pci 0000:00:07.0: setting latency timer to 64
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:03.0: irq 24 for MSI/MSI-X
alloc irq_desc for 25 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:03.0: irq 25 for MSI/MSI-X
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:03.0: irq 26 for MSI/MSI-X
alloc irq_desc for 27 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:04.0: irq 27 for MSI/MSI-X
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:04.0: irq 28 for MSI/MSI-X
alloc irq_desc for 29 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:04.0: irq 29 for MSI/MSI-X
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:06.0: irq 30 for MSI/MSI-X
alloc irq_desc for 31 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:06.0: irq 31 for MSI/MSI-X
vda: vda1 vda15
Refined TSC clocksource calibration: 1799.999 MHz.
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:05.0: irq 32 for MSI/MSI-X
alloc irq_desc for 33 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:05.0: irq 33 for MSI/MSI-X
alloc irq_desc for 34 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:05.0: irq 34 for MSI/MSI-X
alloc irq_desc for 35 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:05.0: irq 35 for MSI/MSI-X
scsi2 : Virtio SCSI HBA
EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/vda1
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1472590966.413:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
type=1305 audit(1472590975.456:3): audit_pid=1069 old=0 auid=4294967295 ses=4294967295 res=1
eth0: no IPv6 routers present
udev: starting version 147