dmesg - Qemu-KVM
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt25-2+deb8u3 (2016-07-02)
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007ffdffff] usable
BIOS-e820: [mem 0x000000007ffe0000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 0.8 present.
DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20150306_163512-brownie 04/01/2014
Hypervisor detected: KVM
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x7ffe0 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0080000000 mask FF80000000 uncachable
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
PAT not supported by CPU.
found SMP MP-table at [mem 0x000f1090-0x000f109f] mapped at [ffff8800000f1090]
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01af4000, 0x01af4fff] PGTABLE
BRK [0x01af5000, 0x01af5fff] PGTABLE
BRK [0x01af6000, 0x01af6fff] PGTABLE
init_memory_mapping: [mem 0x7fc00000-0x7fdfffff]
[mem 0x7fc00000-0x7fdfffff] page 2M
BRK [0x01af7000, 0x01af7fff] PGTABLE
init_memory_mapping: [mem 0x7c000000-0x7fbfffff]
[mem 0x7c000000-0x7fbfffff] page 2M
init_memory_mapping: [mem 0x00100000-0x7bffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x7bffffff] page 2M
init_memory_mapping: [mem 0x7fe00000-0x7ffdffff]
[mem 0x7fe00000-0x7ffdffff] page 4k
BRK [0x01af8000, 0x01af8fff] PGTABLE
RAMDISK: [mem 0x36356000-0x371a2fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0EA0 000014 (v00 BOCHS )
ACPI: RSDT 0x000000007FFE1853 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
ACPI: FACP 0x000000007FFE0E48 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
ACPI: DSDT 0x000000007FFE0040 000E08 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001)
ACPI: FACS 0x000000007FFE0000 000040
ACPI: SSDT 0x000000007FFE0EBC 0008E7 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
ACPI: APIC 0x000000007FFE17A3 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
ACPI: HPET 0x000000007FFE181B 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000007ffdffff]
Initmem setup node 0 [mem 0x00000000-0x7ffdffff]
NODE_DATA [mem 0x7ffdb000-0x7ffdffff]
kvm-clock: Using msrs 4b564d01 and 4b564d00
kvm-clock: cpu 0, msr 0:7ffd3001, primary cpu clock
[ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0x7ffdffff]
On node 0 totalpages: 524158
DMA zone: 56 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 7112 pages used for memmap
DMA32 zone: 520160 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x608
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
e820: [mem 0x80000000-0xfeffbfff] available for PCI devices
Booting paravirtualized kernel on KVM
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88007fc00000 s80896 r8192 d21504 u2097152
pcpu-alloc: s80896 r8192 d21504 u2097152 alloc=1*2097152
pcpu-alloc: [0] 0
KVM setup async PF for cpu 0
kvm-stealtime: cpu 0, msr 7fc0d080
Built 1 zonelists in Node order, mobility grouping on. Total pages: 516969
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2041580K/2096632K available (5220K kernel code, 947K rwdata, 1836K rodata, 1204K init, 840K bss, 55052K reserved)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
NR_IRQS:33024 nr_irqs:256 16
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Detected 2494.332 MHz processor
Calibrating delay loop (skipped) preset value.. 4988.66 BogoMIPS (lpj=9977328)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
mce: CPU supports 10 MCE banks
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
ftrace: allocating 21683 entries in 85 pages
Enabling x2apic
Enabled x2apic
Switched APIC routing to physical x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel QEMU Virtual CPU version 2.2.0 (fam: 06, model: 06, stepping: 03)
Performance Events: Broken PMU hardware detected, using software events only.
Failed to access perfctr msr (MSR c1 is 0)
x86: Booted up 1 node, 1 CPUs
smpboot: Total of 1 processors activated (4988.66 BogoMIPS)
devtmpfs: initialized
NMI watchdog: disabled (cpu0): hardware events not enabled
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
acpiphp: Slot [9] registered
acpiphp: Slot [10] registered
acpiphp: Slot [11] registered
acpiphp: Slot [12] registered
acpiphp: Slot [13] registered
acpiphp: Slot [14] registered
acpiphp: Slot [15] registered
acpiphp: Slot [16] registered
acpiphp: Slot [17] registered
acpiphp: Slot [18] registered
acpiphp: Slot [19] registered
acpiphp: Slot [20] registered
acpiphp: Slot [21] registered
acpiphp: Slot [22] registered
acpiphp: Slot [23] registered
acpiphp: Slot [24] registered
acpiphp: Slot [25] registered
acpiphp: Slot [26] registered
acpiphp: Slot [27] registered
acpiphp: Slot [28] registered
acpiphp: Slot [29] registered
acpiphp: Slot [30] registered
acpiphp: Slot [31] registered
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xadff]
pci_bus 0000:00: root bus resource [io 0xae0f-0xaeff]
pci_bus 0000:00: root bus resource [io 0xaf20-0xafdf]
pci_bus 0000:00: root bus resource [io 0xafe4-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
pci 0000:00:01.1: reg 0x20: [io 0xc040-0xc04f]
pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff]
pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f]
pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
ACPI: Enabled 16 GPEs in block 00 to 0F
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7ffe0000-0x7fffffff]
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 100.000000 MHz counter
Switched to clocksource kvm-clock
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:03: [dma 2]
pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 6 devices
ACPI: bus type PNP unregistered
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xadff]
pci_bus 0000:00: resource 6 [io 0xae0f-0xaeff]
pci_bus 0000:00: resource 7 [io 0xaf20-0xafdf]
pci_bus 0000:00: resource 8 [io 0xafe4-0xffff]
pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 10 [mem 0x80000000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 14644K (ffff880036356000 - ffff8800371a3000)
microcode: CPU0 sig=0x663, pf=0x1, revision=0x1
microcode: Microcode Update Driver: v2.00 , Peter Oruba
futex hash table entries: 256 (order: 2, 16384 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1472406513.495:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 4016
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 6
GHES: HEST is not enabled!
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
registered taskstats version 1
rtc_cmos 00:00: setting system clock to 2016-08-28 17:48:32 UTC (1472406512)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 912K (ffff88000151c000 - ffff880001600000)
Freeing unused kernel memory: 212K (ffff8800017cb000 - ffff880001800000)
systemd-udevd[54]: starting version 215
random: systemd-udevd urandom read with 1 bits of entropy available
SCSI subsystem initialized
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
libata version 3.00 loaded.
Floppy drive(s): fd0 is 1.44M
FDC 0 is a S82078B
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56
e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
ata_piix 0000:00:01.1: version 2.13
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc040 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc048 irq 15
ata2.01: NODEV after polling detection
ata1.01: NODEV after polling detection
ata2.00: ATAPI: QEMU DVD-ROM, 2.2.0, max UDMA/100
ata1.00: ATA-7: QEMU HARDDISK, 2.2.0, max UDMA/100
ata1.00: 167772160 sectors, multi 16: LBA48
ata2.00: configured for MWDMA2
ata1.00: configured for MWDMA2
scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 0 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.2. PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 167772160 512-byte logical blocks: (85.8 GB/80.0 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr0: scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 < sda5 > sda2
sd 0:0:0:0: [sda] Attached SCSI disk
PM: Starting manual resume from disk
PM: Hibernation image partition 8:5 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
tsc: Refined TSC clocksource calibration: 2494.489 MHz
random: nonblocking pool is initialized
fuse init (API version 7.23)
systemd-udevd[140]: starting version 215
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[drm] Initialized drm 1.1.0 20060810
[drm] Found bochs VGA, ID 0xb0c0.
[drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebf0000.
[TTM] Zone kernel: Available graphics memory: 1029286 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
fbcon: bochsdrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
bochs-drm 0000:00:02.0: fb0: bochsdrmfb frame buffer device
bochs-drm 0000:00:02.0: registered panic notifier
[drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 0
input: PC Speaker as /devices/platform/pcspkr/input/input4
parport_pc 00:04: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
ppdev: user-space parallel port driver
Adding 1951740k swap on /dev/sda5. Priority:-1 extents:1 across:1951740k FS
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
systemd-journald[143]: Received request to flush runtime journal from PID 1
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX