dmesg - y
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-642.el6.x86_64 (mockbuild@worker1.bsys.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-17) (GCC) ) #1 SMP Tue May 10 17:27:01 UTC 2016
Command line: ro root=/dev/mapper/vg_teste-lv_root rd_NO_LUKS KEYBOARDTYPE=pc KEYTABLE=br-abnt2 LANG=pt_BR.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 rd_LVM_LV=vg_teste/lv_swap crashkernel=auto rd_LVM_LV=vg_teste/lv_root rd_NO_DM rhgb quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000093000 (usable)
BIOS-e820: 0000000000093000 - 0000000000094000 (reserved)
BIOS-e820: 0000000000094000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 0000000062f81000 (usable)
BIOS-e820: 0000000062f81000 - 000000006b581000 (reserved)
BIOS-e820: 000000006b581000 - 000000006b582000 (usable)
BIOS-e820: 000000006b582000 - 000000006b603000 (reserved)
BIOS-e820: 000000006b603000 - 00000000784ff000 (usable)
BIOS-e820: 00000000784ff000 - 00000000791ff000 (reserved)
BIOS-e820: 00000000791ff000 - 000000007b5ff000 (ACPI NVS)
BIOS-e820: 000000007b5ff000 - 000000007b7ff000 (ACPI data)
BIOS-e820: 000000007b7ff000 - 000000007b800000 (usable)
BIOS-e820: 0000000080000000 - 0000000090000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000480000000 (usable)
EFI v2.40 by HP
ACPI=0x7b7fe000 ACPI 2.0=0x7b7fe014 SMBIOS=0x788fb000
EFI: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x0000000000091000) (0MB)
EFI: mem01: type=2, attr=0xf, range=[0x0000000000091000-0x0000000000093000) (0MB)
EFI: mem02: type=0, attr=0xf, range=[0x0000000000093000-0x0000000000094000) (0MB)
EFI: mem03: type=7, attr=0xf, range=[0x0000000000094000-0x00000000000a0000) (0MB)
EFI: mem04: type=7, attr=0xf, range=[0x0000000000100000-0x000000003ed00000) (1004MB)
EFI: mem05: type=4, attr=0xf, range=[0x000000003ed00000-0x000000003ed80000) (0MB)
EFI: mem06: type=7, attr=0xf, range=[0x000000003ed80000-0x0000000061e8d000) (561MB)
EFI: mem07: type=2, attr=0xf, range=[0x0000000061e8d000-0x0000000062f81000) (16MB)
EFI: mem08: type=0, attr=0xf, range=[0x0000000062f81000-0x000000006b581000) (134MB)
EFI: mem09: type=4, attr=0xf, range=[0x000000006b581000-0x000000006b582000) (0MB)
EFI: mem10: type=6, attr=0x800000000000000f, range=[0x000000006b582000-0x000000006b603000) (0MB)
EFI: mem11: type=4, attr=0xf, range=[0x000000006b603000-0x000000006ecfb000) (54MB)
EFI: mem12: type=3, attr=0xf, range=[0x000000006ecfb000-0x000000006ecfc000) (0MB)
EFI: mem13: type=2, attr=0xf, range=[0x000000006ecfc000-0x000000006ecff000) (0MB)
EFI: mem14: type=7, attr=0xf, range=[0x000000006ecff000-0x000000006f5af000) (8MB)
EFI: mem15: type=2, attr=0xf, range=[0x000000006f5af000-0x0000000070e1a000) (24MB)
EFI: mem16: type=4, attr=0xf, range=[0x0000000070e1a000-0x0000000070eb3000) (0MB)
EFI: mem17: type=7, attr=0xf, range=[0x0000000070eb3000-0x0000000070eb4000) (0MB)
EFI: mem18: type=4, attr=0xf, range=[0x0000000070eb4000-0x0000000070ebf000) (0MB)
EFI: mem19: type=7, attr=0xf, range=[0x0000000070ebf000-0x0000000070ec1000) (0MB)
EFI: mem20: type=4, attr=0xf, range=[0x0000000070ec1000-0x0000000070ec2000) (0MB)
EFI: mem21: type=7, attr=0xf, range=[0x0000000070ec2000-0x0000000070ec4000) (0MB)
EFI: mem22: type=4, attr=0xf, range=[0x0000000070ec4000-0x0000000070ecb000) (0MB)
EFI: mem23: type=7, attr=0xf, range=[0x0000000070ecb000-0x0000000070ecd000) (0MB)
EFI: mem24: type=4, attr=0xf, range=[0x0000000070ecd000-0x0000000070ecf000) (0MB)
EFI: mem25: type=7, attr=0xf, range=[0x0000000070ecf000-0x0000000070ed0000) (0MB)
EFI: mem26: type=4, attr=0xf, range=[0x0000000070ed0000-0x0000000072c40000) (29MB)
EFI: mem27: type=7, attr=0xf, range=[0x0000000072c40000-0x0000000072c43000) (0MB)
EFI: mem28: type=4, attr=0xf, range=[0x0000000072c43000-0x0000000076cff000) (64MB)
EFI: mem29: type=2, attr=0xf, range=[0x0000000076cff000-0x0000000076e52000) (1MB)
EFI: mem30: type=7, attr=0xf, range=[0x0000000076e52000-0x0000000076e9e000) (0MB)
EFI: mem31: type=2, attr=0xf, range=[0x0000000076e9e000-0x00000000770ff000) (2MB)
EFI: mem32: type=7, attr=0xf, range=[0x00000000770ff000-0x00000000774be000) (3MB)
EFI: mem33: type=1, attr=0xf, range=[0x00000000774be000-0x00000000774ff000) (0MB)
EFI: mem34: type=7, attr=0xf, range=[0x00000000774ff000-0x0000000077649000) (1MB)
EFI: mem35: type=3, attr=0xf, range=[0x0000000077649000-0x00000000784ff000) (14MB)
EFI: mem36: type=6, attr=0x800000000000000f, range=[0x00000000784ff000-0x00000000788ff000) (4MB)
EFI: mem37: type=5, attr=0x800000000000000f, range=[0x00000000788ff000-0x00000000790ff000) (8MB)
EFI: mem38: type=0, attr=0xf, range=[0x00000000790ff000-0x00000000791ff000) (1MB)
EFI: mem39: type=10, attr=0xf, range=[0x00000000791ff000-0x000000007b5ff000) (36MB)
EFI: mem40: type=9, attr=0xf, range=[0x000000007b5ff000-0x000000007b7ff000) (2MB)
EFI: mem41: type=4, attr=0xf, range=[0x000000007b7ff000-0x000000007b800000) (0MB)
EFI: mem42: type=7, attr=0xf, range=[0x0000000100000000-0x0000000480000000) (14336MB)
EFI: mem43: type=11, attr=0x8000000000000000, range=[0x0000000080000000-0x0000000090000000) (256MB)
SMBIOS version 2.8 @ 0x788FB000
SMBIOS 2.8 present.
DMI: HP ProLiant DL160 Gen9/ProLiant DL160 Gen9, BIOS U20 05/05/2016
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x480000 max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0x7b800 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-000000007b800000
0000000000 - 0040000000 page 1G
0040000000 - 007b800000 page 2M
kernel direct mapping tables up to 7b800000 @ 8000-a000
Use unified mapping for non-reserved e820 regions.
init_memory_mapping: 0000000100000000-0000000480000000
0100000000 - 0480000000 page 1G
kernel direct mapping tables up to 480000000 @ 9000-a000
RAMDISK: 6f5af000 - 70e19164
ACPI: Deleted _OSI()
ACPI: Deleted _OSI()
ACPI: RSDP 000000007b7fe014 00024 (v02 HP )
ACPI: XSDT 000000007b7e8188 000F4 (v01 HP ProLiant 00000001 01000013)
ACPI: FACP 000000007b7f5000 0010C (v05 HP ProLiant 00000001 HP 00000001)
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20090903/tbfadt-288)
ACPI: DSDT 000000007b7e4000 02EF5 (v02 HP DSDT 00000002 HPAG 00020000)
ACPI: FACS 000000007b5a9000 00040
ACPI: UEFI 000000007b5e1000 00042 (v01 HP ProLiant 00000002 01000013)
ACPI: MCEJ 000000007b7fc000 00130 (v01 HP ProLiant 00000001 INTL 0100000D)
ACPI: SSDT 000000007b7fb000 00064 (v02 HP SpsNvs 00000002 INTL 20130328)
ACPI: HEST 000000007b7fa000 000A8 (v01 HP ProLiant 00000001 INTL 00000001)
ACPI: BERT 000000007b7f9000 00030 (v01 HP ProLiant 00000001 INTL 00000001)
ACPI: ERST 000000007b7f8000 00230 (v01 HP ProLiant 00000001 INTL 00000001)
ACPI: EINJ 000000007b7f7000 00150 (v01 HP ProLiant 00000001 INTL 00000001)
ACPI: BGRT 000000007b7f6000 00038 (v01 HP ProLiant 00000002 HP 01000013)
ACPI: HPET 000000007b7f4000 00038 (v01 HP ProLiant 00000001 HP 00000001)
ACPI: PMCT 000000007b7f3000 00064 (v01 HP ProLiant 00000001 HP 00000001)
ACPI: WDDT 000000007b7f2000 00040 (v01 HP ProLiant 00000001 HP 00000001)
ACPI: APIC 000000007b7f1000 00106 (v03 HP ProLiant 00000001 HP 00000001)
ACPI: MCFG 000000007b7f0000 0003C (v01 HP ProLiant 00000001 HP 00000001)
ACPI: SLIT 000000007b7ef000 0002D (v01 HP ProLiant 00000001 HP 00000001)
ACPI: SRAT 000000007b7ee000 000E8 (v03 HP ProLiant 00000001 HP 00000001)
ACPI: SPMI 000000007b7ed000 00041 (v05 HP ProLiant 00000001 HP 00000001)
ACPI: RASF 000000007b7ec000 00030 (v01 HP ProLiant 00000001 HP 00000001)
ACPI: SPCR 000000007b7eb000 00050 (v01 HP ProLiant 00000001 HP 00000001)
ACPI: MSCT 000000007b7ea000 0004E (v01 HP ProLiant 00000001 HP 00000001)
ACPI: BDAT 000000007b7e9000 00030 (v01 HP ProLiant 00000001 HP 00000001)
ACPI: PCCT 000000007b7fd000 0006E (v01 HP ProLiant 00000001 HP 00000001)
ACPI: DMAR 000000007b7e7000 00220 (v01 HP ProLiant 00000001 HP 00000001)
ACPI: SSDT 000000007b7de000 05B31 (v02 HP PCISSDT 00000002 HPAG 00020000)
ACPI: SSDT 000000007b7dd000 001CB (v02 HP TIMESSDT 00000002 HPAG 00020000)
ACPI: SSDT 000000007b7dc000 002F2 (v01 HP pmab 00000001 INTL 20130328)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 4 -> Node 0
SRAT: PXM 0 -> APIC 8 -> Node 0
SRAT: PXM 0 -> APIC 2 -> Node 0
SRAT: PXM 0 -> APIC 6 -> Node 0
SRAT: PXM 0 -> APIC 10 -> Node 0
SRAT: Node 0 PXM 0 0-480000000
NUMA: Using 63 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000480000000
NODE_DATA [0000000000009000 - 000000000003cfff]
bootmap [0000000000100000 - 000000000018ffff] pages 90
(9 early reservations) ==> bootmem [0000000000 - 0480000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0002044924] TEXT DATA BSS ==> [0001000000 - 0002044924]
#3 [006f5af000 - 0070e19164] RAMDISK ==> [006f5af000 - 0070e19164]
#4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#5 [00770fc000 - 00770fc840] EFI memmap ==> [00770fc000 - 00770fc840]
#6 [0002045000 - 0002045761] BRK ==> [0002045000 - 0002045761]
#7 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]
#8 [0000001000 - 000000102d] ACPI SLIT ==> [0000001000 - 000000102d]
Reserving 130MB of memory at 48MB for crashkernel (System RAM: 18432MB)
[ffffea0000000000-ffffea000fbfffff] PMD -> [ffff880028600000-ffff8800365fffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00480000
Movable zone start PFN for each node
early_node_map[7] active PFN ranges
0: 0x00000001 -> 0x00000093
0: 0x00000094 -> 0x000000a0
0: 0x00000100 -> 0x00062f81
0: 0x0006b581 -> 0x0006b582
0: 0x0006b603 -> 0x000784ff
0: 0x0007b7ff -> 0x0007b800
0: 0x00100000 -> 0x00480000
On node 0 totalpages: 4128285
DMA zone: 56 pages used for memmap
DMA zone: 101 pages reserved
DMA zone: 3841 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 439991 pages, LIFO batch:31
Normal zone: 50176 pages used for memmap
Normal zone: 3619840 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: X2APIC (apic_id[0x00] uid[0x00] enabled)
ACPI: X2APIC (apic_id[0x04] uid[0x04] enabled)
ACPI: X2APIC (apic_id[0x08] uid[0x08] enabled)
ACPI: X2APIC (apic_id[0x02] uid[0x02] enabled)
ACPI: X2APIC (apic_id[0x06] uid[0x06] enabled)
ACPI: X2APIC (apic_id[0x0a] uid[0x0a] enabled)
ACPI: X2APIC_NMI (uid[0x00] high level lint[0x1])
ACPI: X2APIC_NMI (uid[0x02] high level lint[0x1])
ACPI: X2APIC_NMI (uid[0x04] high level lint[0x1])
ACPI: X2APIC_NMI (uid[0x06] high level lint[0x1])
ACPI: X2APIC_NMI (uid[0x08] high level lint[0x1])
ACPI: X2APIC_NMI (uid[0x0a] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 6 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 48
PM: Registered nosave memory: 0000000000093000 - 0000000000094000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 0000000062f81000 - 000000006b581000
PM: Registered nosave memory: 000000006b582000 - 000000006b603000
PM: Registered nosave memory: 00000000784ff000 - 00000000791ff000
PM: Registered nosave memory: 00000000791ff000 - 000000007b5ff000
PM: Registered nosave memory: 000000007b5ff000 - 000000007b7ff000
PM: Registered nosave memory: 000000007b800000 - 0000000080000000
PM: Registered nosave memory: 0000000080000000 - 0000000090000000
PM: Registered nosave memory: 0000000090000000 - 0000000100000000
Allocating PCI resources starting at 90000000 (gap: 90000000:70000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s96600 r8192 d22184 u262144
pcpu-alloc: s96600 r8192 d22184 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - -
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4063672
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/vg_teste-lv_root rd_NO_LUKS KEYBOARDTYPE=pc KEYTABLE=br-abnt2 LANG=pt_BR.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 rd_LVM_LV=vg_teste/lv_swap crashkernel=130M@0M rd_LVM_LV=vg_teste/lv_root rd_NO_DM rhgb quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
dmar: Queued invalidation will be enabled to support x2apic and Intr-remapping.
Memory: 15872660k/18874368k available (5455k kernel code, 2361228k absent, 640480k reserved, 6964k data, 1316k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:864
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1598.173 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3196.34 BogoMIPS (lpj=1598173)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 22342 entries in 88 pages
dmar: Host address width 46
dmar: DRHD base: 0x000000fbffc000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020df
dmar: RMRR base: 0x0000007916c000 end: 0x0000007916efff
dmar: RMRR base: 0x000000791ec000 end: 0x000000791effff
dmar: RMRR base: 0x000000791d6000 end: 0x000000791ebfff
dmar: RMRR base: 0x00000063581000 end: 0x00000067580fff
dmar: RMRR base: 0x00000067581000 end: 0x0000006b580fff
dmar: RMRR base: 0x000000791c3000 end: 0x000000791d3fff
dmar: RMRR base: 0x000000791d4000 end: 0x000000791d5fff
dmar: No ATSR found
IOAPIC id 8 under DRHD base 0xfbffc000
IOAPIC id 9 under DRHD base 0xfbffc000
HPET id 0 under DRHD base 0xfbffc000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
APIC routing finalized to cluster x2apic.
alloc irq_desc for 48 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5-2603 v3 @ 1.60GHz stepping 02
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Broken BIOS detected, complain to your hardware vendor.
[Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330)
Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 Ok.
Brought up 6 CPUs
Total of 6 processors activated (19178.07 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2672 bytes
devtmpfs: initialized
PM: Registering ACPI NVS region at 791ff000 (37748736 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255
PCI: MCFG area at 80000000 reserved in E820
PCI: Using MMCONFIG at 80000000 - 8fffffff
PCI: Using configuration type 1 for base access
NMI watchdog enabled, takes one hw-pmu counter.
PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: BIOS offers _GTS
ACPI: If "acpi.gts=1" improves suspend, please notify linux-acpi@vger.kernel.org
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
PCI host bridge to bus 0000:ff
ACPI: PCI Interrupt Routing Table [\_SB_.UNC0._PRT]
pci0000:ff: Requesting ACPI _OSC control (0x1d)
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000cbfff]
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03bb]
pci_root PNP0A08:00: host bridge window [io 0x03c0-0x03df]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [io 0x1000-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x90000000-0xfbffbfff]
pci_root PNP0A08:00: host bridge window [mem 0x38000000000-0x39fffffffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000cbfff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb]
pci_bus 0000:00: root bus resource [io 0x03c0-0x03df]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff]
pci_bus 0000:00: root bus resource [mem 0x38000000000-0x39fffffffff]
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: PME# disabled
pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.3: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.1: PME# disabled
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: PME# disabled
pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
pci 0000:00:03.3: PME# disabled
pci 0000:00:04.0: reg 10: [mem 0x39ffff2c000-0x39ffff2ffff 64bit]
pci 0000:00:04.1: reg 10: [mem 0x39ffff28000-0x39ffff2bfff 64bit]
pci 0000:00:04.2: reg 10: [mem 0x39ffff24000-0x39ffff27fff 64bit]
pci 0000:00:04.3: reg 10: [mem 0x39ffff20000-0x39ffff23fff 64bit]
pci 0000:00:04.4: reg 10: [mem 0x39ffff1c000-0x39ffff1ffff 64bit]
pci 0000:00:04.5: reg 10: [mem 0x39ffff18000-0x39ffff1bfff 64bit]
pci 0000:00:04.6: reg 10: [mem 0x39ffff14000-0x39ffff17fff 64bit]
pci 0000:00:04.7: reg 10: [mem 0x39ffff10000-0x39ffff13fff 64bit]
pci 0000:00:05.4: reg 10: [mem 0x92e05000-0x92e05fff]
pci 0000:00:11.4: reg 10: [io 0x30a0-0x30a7]
pci 0000:00:11.4: reg 14: [io 0x30bc-0x30bf]
pci 0000:00:11.4: reg 18: [io 0x3098-0x309f]
pci 0000:00:11.4: reg 1c: [io 0x30b8-0x30bb]
pci 0000:00:11.4: reg 20: [io 0x3040-0x305f]
pci 0000:00:11.4: reg 24: [mem 0x92e04000-0x92e047ff]
pci 0000:00:11.4: PME# supported from D3hot
pci 0000:00:11.4: PME# disabled
pci 0000:00:14.0: reg 10: [mem 0x39ffff00000-0x39ffff0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0x92e02000-0x92e023ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PME# disabled
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0x92e01000-0x92e013ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0x3078-0x307f]
pci 0000:00:1f.2: reg 14: [io 0x30ac-0x30af]
pci 0000:00:1f.2: reg 18: [io 0x3070-0x3077]
pci 0000:00:1f.2: reg 1c: [io 0x30a8-0x30ab]
pci 0000:00:1f.2: reg 20: [io 0x3020-0x303f]
pci 0000:00:1f.2: reg 24: [mem 0x92e00000-0x92e007ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0x39ffff31000-0x39ffff310ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f]
pci 0000:00:01.0: PCI bridge to [bus 0a-0a]
pci 0000:00:01.1: PCI bridge to [bus 0d-0d]
pci 0000:00:02.0: PCI bridge to [bus 02-02]
pci 0000:00:02.1: PCI bridge to [bus 03-03]
pci 0000:00:02.2: PCI bridge to [bus 04-04]
pci 0000:05:00.0: reg 10: [mem 0x92c00000-0x92cfffff]
pci 0000:05:00.0: reg 18: [io 0x2020-0x203f]
pci 0000:05:00.0: reg 1c: [mem 0x92d04000-0x92d07fff]
pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:05:00.0: reg 184: [mem 0x39fffe60000-0x39fffe63fff 64bit pref]
pci 0000:05:00.0: reg 190: [mem 0x39fffe40000-0x39fffe43fff 64bit pref]
pci 0000:05:00.1: reg 10: [mem 0x92b00000-0x92bfffff]
pci 0000:05:00.1: reg 18: [io 0x2000-0x201f]
pci 0000:05:00.1: reg 1c: [mem 0x92d00000-0x92d03fff]
pci 0000:05:00.1: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:05:00.1: PME# supported from D0 D3hot D3cold
pci 0000:05:00.1: PME# disabled
pci 0000:05:00.1: reg 184: [mem 0x39fffe20000-0x39fffe23fff 64bit pref]
pci 0000:05:00.1: reg 190: [mem 0x39fffe00000-0x39fffe03fff 64bit pref]
pci 0000:00:02.3: PCI bridge to [bus 05-05]
pci 0000:00:02.3: bridge window [io 0x2000-0x2fff]
pci 0000:00:02.3: bridge window [mem 0x92b00000-0x92dfffff]
pci 0000:00:02.3: bridge window [mem 0x39fffe00000-0x39fffefffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 06-06]
pci 0000:00:03.1: PCI bridge to [bus 0e-0e]
pci 0000:00:03.2: PCI bridge to [bus 09-09]
pci 0000:00:03.3: PCI bridge to [bus 0f-0f]
pci 0000:00:1c.0: PCI bridge to [bus 10-10] (subtractive decode)
pci 0000:00:1c.0: bridge window [mem 0x000c4000-0x000cbfff] (subtractive decode)
pci 0000:00:1c.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1c.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1c.0: bridge window [io 0x03b0-0x03bb] (subtractive decode)
pci 0000:00:1c.0: bridge window [io 0x03c0-0x03df] (subtractive decode)
pci 0000:00:1c.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1c.0: bridge window [io 0x1000-0xffff] (subtractive decode)
pci 0000:00:1c.0: bridge window [mem 0x90000000-0xfbffbfff] (subtractive decode)
pci 0000:00:1c.0: bridge window [mem 0x38000000000-0x39fffffffff] (subtractive decode)
pci 0000:01:00.0: reg 10: [io 0x1200-0x12ff]
pci 0000:01:00.0: reg 14: [mem 0x92a91000-0x92a911ff]
pci 0000:01:00.0: reg 18: [io 0x1100-0x11ff]
pci 0000:01:00.1: reg 10: [mem 0x91000000-0x91ffffff pref]
pci 0000:01:00.1: reg 14: [mem 0x92a8c000-0x92a8ffff]
pci 0000:01:00.1: reg 18: [mem 0x92000000-0x927fffff]
pci 0000:01:00.2: reg 10: [io 0x1000-0x10ff]
pci 0000:01:00.2: reg 14: [mem 0x92a90000-0x92a900ff]
pci 0000:01:00.2: reg 18: [mem 0x92900000-0x929fffff]
pci 0000:01:00.2: reg 1c: [mem 0x92a00000-0x92a7ffff]
pci 0000:01:00.2: reg 20: [mem 0x92a80000-0x92a87fff]
pci 0000:01:00.2: reg 24: [mem 0x92800000-0x928fffff]
pci 0000:01:00.2: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
pci 0000:01:00.2: PME# disabled
pci 0000:01:00.4: reg 20: [io 0x1300-0x131f]
pci 0000:01:00.7: reg 10: [mem 0x92a88000-0x92a8bfff]
pci 0000:00:1c.2: PCI bridge to [bus 01-01]
pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.2: bridge window [mem 0x90000000-0x92afffff]
pci 0000:00:1c.4: PCI bridge to [bus 11-11]
pci 0000:00:1c.6: PCI bridge to [bus 12-12]
pci 0000:00:1c.7: PCI bridge to [bus 13-13]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR07._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR01._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x15) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:01:00.1,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.1
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
alloc irq_desc for 49 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 50 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 51 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 52 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 53 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 49, 50, 51, 52, 53, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 49 for MSI
hpet: hpet3 irq 50 for MSI
hpet: hpet4 irq 51 for MSI
hpet: hpet5 irq 52 for MSI
hpet: hpet6 irq 53 for MSI
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io 0x0cf8-0x0cff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:02: [mem 0xfec00000-0xfecfffff]
pnp 00:02: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:03: [io 0x0000-0x000f]
pnp 00:03: [io 0x0081-0x0083]
pnp 00:03: [io 0x0087]
pnp 00:03: [io 0x0089-0x008b]
pnp 00:03: [io 0x008f]
pnp 00:03: [io 0x00c0-0x00df]
pnp 00:03: [dma 4]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [io 0x0070-0x0071]
pnp 00:04: [io 0x0074-0x0077]
pnp 00:04: [irq 8]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io 0x00f0]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [mem 0xfed00000-0xfed003ff]
pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:08: [io 0x0500-0x053f]
pnp 00:08: [io 0x0400-0x047f]
pnp 00:08: [io 0x0092]
pnp 00:08: [io 0x0010-0x001f]
pnp 00:08: [io 0x0072-0x0073]
pnp 00:08: [io 0x0080]
pnp 00:08: [io 0x0084-0x0086]
pnp 00:08: [io 0x0088]
pnp 00:08: [io 0x008c-0x008e]
pnp 00:08: [io 0x0090-0x009f]
pnp 00:08: [io 0x0540-0x057f]
pnp 00:08: [io 0x0600-0x061f]
pnp 00:08: [io 0x0880-0x0883]
pnp 00:08: [io 0x0800-0x081f]
pnp 00:08: [mem 0xfed1c000-0xfed3ffff]
pnp 00:08: [mem 0xfed45000-0xfed8bfff]
pnp 00:08: [mem 0xff000000-0xffffffff]
pnp 00:08: [mem 0xfee00000-0xfeefffff]
pnp 00:08: [mem 0xfed12000-0xfed1200f]
pnp 00:08: [mem 0xfed12010-0xfed1201f]
pnp 00:08: [mem 0xfed1b000-0xfed1bfff]
pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io 0x0ca2-0x0ca3]
pnp 00:09: Plug and Play ACPI device, IDs IPI0001 (active)
pnp 00:0a: [io 0x02f8-0x02ff]
pnp 00:0a: [irq 3]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:08: [io 0x0500-0x053f] has been reserved
system 00:08: [io 0x0400-0x047f] has been reserved
system 00:08: [io 0x0540-0x057f] has been reserved
system 00:08: [io 0x0600-0x061f] has been reserved
system 00:08: [io 0x0880-0x0883] has been reserved
system 00:08: [io 0x0800-0x081f] has been reserved
system 00:08: [mem 0xfed1c000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:08: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:08: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:08: [mem 0xfed1b000-0xfed1bfff] has been reserved
pci 0000:00:1c.2: BAR 15: assigned [mem 0x92f00000-0x92ffffff pref]
pci 0000:00:01.0: PCI bridge to [bus 0a-0a]
pci 0000:00:01.1: PCI bridge to [bus 0d-0d]
pci 0000:00:02.0: PCI bridge to [bus 02-02]
pci 0000:00:02.1: PCI bridge to [bus 03-03]
pci 0000:00:02.2: PCI bridge to [bus 04-04]
pci 0000:05:00.0: BAR 6: assigned [mem 0x92d80000-0x92dfffff pref]
pci 0000:05:00.1: BAR 6: can't assign mem pref (size 0x80000)
pci 0000:00:02.3: PCI bridge to [bus 05-05]
pci 0000:00:02.3: bridge window [io 0x2000-0x2fff]
pci 0000:00:02.3: bridge window [mem 0x92b00000-0x92dfffff]
pci 0000:00:02.3: bridge window [mem 0x39fffe00000-0x39fffefffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 06-06]
pci 0000:00:03.1: PCI bridge to [bus 0e-0e]
pci 0000:00:03.2: PCI bridge to [bus 09-09]
pci 0000:00:03.3: PCI bridge to [bus 0f-0f]
pci 0000:00:1c.0: PCI bridge to [bus 10-10]
pci 0000:01:00.2: BAR 6: assigned [mem 0x92f00000-0x92f0ffff pref]
pci 0000:00:1c.2: PCI bridge to [bus 01-01]
pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.2: bridge window [mem 0x90000000-0x92afffff]
pci 0000:00:1c.2: bridge window [mem 0x92f00000-0x92ffffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 11-11]
pci 0000:00:1c.6: PCI bridge to [bus 12-12]
pci 0000:00:1c.7: PCI bridge to [bus 13-13]
pci 0000:00:01.0: can't derive routing for PCI INT A
pci 0000:00:01.0: PCI INT A: no GSI
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:01.1: can't derive routing for PCI INT A
pci 0000:00:01.1: PCI INT A: no GSI
pci 0000:00:01.1: setting latency timer to 64
pci 0000:00:02.0: can't derive routing for PCI INT A
pci 0000:00:02.0: PCI INT A: no GSI
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:02.1: can't derive routing for PCI INT A
pci 0000:00:02.1: PCI INT A: no GSI
pci 0000:00:02.1: setting latency timer to 64
pci 0000:00:02.2: can't derive routing for PCI INT A
pci 0000:00:02.2: PCI INT A: no GSI
pci 0000:00:02.2: setting latency timer to 64
pci 0000:00:02.3: can't derive routing for PCI INT A
pci 0000:00:02.3: PCI INT A: no GSI
pci 0000:00:02.3: setting latency timer to 64
pci 0000:00:03.0: can't derive routing for PCI INT A
pci 0000:00:03.0: PCI INT A: no GSI
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:03.1: can't derive routing for PCI INT A
pci 0000:00:03.1: PCI INT A: no GSI
pci 0000:00:03.1: setting latency timer to 64
pci 0000:00:03.2: can't derive routing for PCI INT A
pci 0000:00:03.2: PCI INT A: no GSI
pci 0000:00:03.2: setting latency timer to 64
pci 0000:00:03.3: can't derive routing for PCI INT A
pci 0000:00:03.3: PCI INT A: no GSI
pci 0000:00:03.3: setting latency timer to 64
alloc irq_desc for 16 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 18 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.6: setting latency timer to 64
alloc irq_desc for 19 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci_bus 0000:00: resource 4 [mem 0x000c4000-0x000cbfff]
pci_bus 0000:00: resource 5 [io 0x0000-0x03af]
pci_bus 0000:00: resource 6 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 7 [io 0x03b0-0x03bb]
pci_bus 0000:00: resource 8 [io 0x03c0-0x03df]
pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 10 [io 0x1000-0xffff]
pci_bus 0000:00: resource 11 [mem 0x90000000-0xfbffbfff]
pci_bus 0000:00: resource 12 [mem 0x38000000000-0x39fffffffff]
pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:05: resource 1 [mem 0x92b00000-0x92dfffff]
pci_bus 0000:05: resource 2 [mem 0x39fffe00000-0x39fffefffff 64bit pref]
pci_bus 0000:10: resource 4 [mem 0x000c4000-0x000cbfff]
pci_bus 0000:10: resource 5 [io 0x0000-0x03af]
pci_bus 0000:10: resource 6 [io 0x03e0-0x0cf7]
pci_bus 0000:10: resource 7 [io 0x03b0-0x03bb]
pci_bus 0000:10: resource 8 [io 0x03c0-0x03df]
pci_bus 0000:10: resource 9 [mem 0x000a0000-0x000bffff]
pci_bus 0000:10: resource 10 [io 0x1000-0xffff]
pci_bus 0000:10: resource 11 [mem 0x90000000-0xfbffbfff]
pci_bus 0000:10: resource 12 [mem 0x38000000000-0x39fffffffff]
pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:01: resource 1 [mem 0x90000000-0x92afffff]
pci_bus 0000:01: resource 2 [mem 0x92f00000-0x92ffffff pref]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:14.0: enabling device (0140 -> 0142)
pci 0000:00:14.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:14.0: PCI INT D disabled
pci 0000:00:1a.0: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1a.0: PCI INT C disabled
pci 0000:00:1d.0: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1d.0: PCI INT C disabled
pci 0000:01:00.1: Boot video device
pci 0000:01:00.4: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pci 0000:01:00.4: PCI INT B disabled
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 25000k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Intel CQM monitoring enabled
sha256_ssse3: Using AVX optimized SHA-256 implementation
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink socket (disabled)
type=2000 audit(1470170309.848:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 31380
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 2163146EC4595AB0
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 54 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:01.0: irq 54 for MSI/MSI-X
pcieport 0000:00:01.1: setting latency timer to 64
alloc irq_desc for 55 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:01.1: irq 55 for MSI/MSI-X
pcieport 0000:00:02.0: setting latency timer to 64
alloc irq_desc for 56 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:02.0: irq 56 for MSI/MSI-X
pcieport 0000:00:02.1: setting latency timer to 64
alloc irq_desc for 57 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:02.1: irq 57 for MSI/MSI-X
pcieport 0000:00:02.2: setting latency timer to 64
alloc irq_desc for 58 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:02.2: irq 58 for MSI/MSI-X
pcieport 0000:00:02.3: setting latency timer to 64
alloc irq_desc for 59 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:02.3: irq 59 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 60 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:03.0: irq 60 for MSI/MSI-X
pcieport 0000:00:03.1: setting latency timer to 64
alloc irq_desc for 61 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:03.1: irq 61 for MSI/MSI-X
pcieport 0000:00:03.2: setting latency timer to 64
alloc irq_desc for 62 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:03.2: irq 62 for MSI/MSI-X
pcieport 0000:00:03.3: setting latency timer to 64
alloc irq_desc for 63 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:03.3: irq 63 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
alloc irq_desc for 64 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:1c.2: irq 64 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 65 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:1c.4: irq 65 for MSI/MSI-X
pcieport 0000:00:1c.6: setting latency timer to 64
alloc irq_desc for 66 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:1c.6: irq 66 for MSI/MSI-X
pcieport 0000:00:1c.7: setting latency timer to 64
alloc irq_desc for 67 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:1c.7: irq 67 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
efifb: probing for efifb
efifb: framebuffer at 0x91000000, mapped to 0xffffc90022680000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idle
[Firmware Bug]: No valid trip found
ERST: Error Record Serialization Table (ERST) support is initialized.
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 18, io mem 0x92e02000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-642.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 18, io mem 0x92e01000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-642.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:01:00.4: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:01:00.4: setting latency timer to 64
uhci_hcd 0000:01:00.4: UHCI Host Controller
uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus number 3
uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:01:00.4: irq 19, io base 0x00001300
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-642.el6.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:01:00.4
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PNP: No PS/2 controller found. Probing ports directly.
usb 1-1: new high speed USB device number 2 using ehci_hcd
usb 1-1: New USB device found, idVendor=8087, idProduct=800a
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device number 2 using ehci_hcd
i8042.c: Can't read CTR while initializing i8042.
i8042: probe of i8042 failed with error -5
mice: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:04: setting system clock to 2016-08-02 20:38:31 UTC (1470170311)
Initalizing network drop monitor service
Freeing unused kernel memory: 1316k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 668k freed
Freeing unused kernel memory: 1556k freed
dracut: dracut-004-409.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.1-ioctl (2015-8-18) initialised: dm-devel@redhat.com
usb 2-1: New USB device found, idVendor=8087, idProduct=8002
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
udev: starting version 147
Refined TSC clocksource calibration: 1598.099 MHz.
Switching to clocksource tsc
ACPI: WMI: Mapper loaded
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
ahci 0000:00:11.4: version 3.0
ahci 0000:00:11.4: enabling device (0406 -> 0407)
ahci 0000:00:11.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
alloc irq_desc for 68 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ahci 0000:00:11.4: irq 68 for MSI/MSI-X
ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl RAID mode
ahci 0000:00:11.4: flags: 64bit ncq pm led clo pio slum part ems apst
ahci 0000:00:11.4: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m2048@0x92e04000 port 0x92e04100 irq 68
ata2: SATA max UDMA/133 abar m2048@0x92e04000 port 0x92e04180 irq 68
ata3: SATA max UDMA/133 abar m2048@0x92e04000 port 0x92e04200 irq 68
ata4: SATA max UDMA/133 abar m2048@0x92e04000 port 0x92e04280 irq 68
ahci 0000:00:1f.2: enabling device (0406 -> 0407)
ahci 0000:00:1f.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
alloc irq_desc for 69 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ahci 0000:00:1f.2: irq 69 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
scsi9 : ahci
ata5: SATA max UDMA/133 abar m2048@0x92e00000 port 0x92e00100 irq 69
ata6: SATA max UDMA/133 abar m2048@0x92e00000 port 0x92e00180 irq 69
ata7: SATA max UDMA/133 abar m2048@0x92e00000 port 0x92e00200 irq 69
ata8: SATA max UDMA/133 abar m2048@0x92e00000 port 0x92e00280 irq 69
ata9: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 69
ata10: SATA max UDMA/133 abar m2048@0x92e00000 port 0x92e00380 irq 69
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-8: MB0500GCEHE, HPG1, max UDMA/133
ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA MB0500GCEHE HPG1 PQ: 0 ANSI: 5
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata9.00: ATAPI: hp DVDRAM GUB0N, UK00, max UDMA/100, ATAPI AN
ata9.00: configured for UDMA/100
scsi 8:0:0:0: CD-ROM hp DVDRAM GUB0N UK00 PQ: 0 ANSI: 5
xhci_hcd 0000:00:14.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-642.el6.x86_64 xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 5
usb usb5: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
usb usb5: New USB device found, idVendor=1d6b, idProduct=0003
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-642.el6.x86_64 xhci_hcd
usb usb5: SerialNumber: 0000:00:14.0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 6 ports detected
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 8:0:0:0: Attached scsi CD-ROM sr0
usb 4-3: new high speed USB device number 2 using xhci_hcd
usb 4-3: New USB device found, idVendor=0424, idProduct=2660
usb 4-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 4-3: configuration #1 chosen from 1 choice
hub 4-3:1.0: USB hub found
hub 4-3:1.0: 2 ports detected
usb 4-9: new high speed USB device number 3 using xhci_hcd
usb 4-9: New USB device found, idVendor=0781, idProduct=5567
usb 4-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-9: Product: Cruzer Blade
usb 4-9: Manufacturer: SanDisk
usb 4-9: SerialNumber: 4C530202440130123125
usb 4-9: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi10 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 4-11: new low speed USB device number 4 using xhci_hcd
usb 4-11: New USB device found, idVendor=062a, idProduct=0003
usb 4-11: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-11: Product: Optical Mouse
usb 4-11: Manufacturer: MosArt
usb 4-11: configuration #1 chosen from 1 choice
usb 4-11: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: MosArt Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb4/4-11/4-11:1.0/input/input2
generic-usb 0003:062A:0003.0001: input,hidraw0: USB HID v1.10 Mouse [MosArt Optical Mouse] on usb-0000:00:14.0-11/input0
dracut: Scanning devices sda3 for LVM logical volumes vg_teste/lv_swap vg_teste/lv_root
dracut: inactive '/dev/vg_teste/lv_root' [50.00 GiB] inherit
dracut: inactive '/dev/vg_teste/lv_home' [407.35 GiB] inherit
dracut: inactive '/dev/vg_teste/lv_swap' [7.73 GiB] inherit
usb 4-12: new low speed USB device number 5 using xhci_hcd
usb 4-12: New USB device found, idVendor=1a2c, idProduct=2d23
usb 4-12: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-12: Product: USB Keyboard
usb 4-12: Manufacturer: USB
usb 4-12: configuration #1 chosen from 1 choice
usb 4-12: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 4-12: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: USB USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb4/4-12/4-12:1.0/input/input3
generic-usb 0003:1A2C:2D23.0002: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keyboard] on usb-0000:00:14.0-12/input0
input: USB USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb4/4-12/4-12:1.1/input/input4
generic-usb 0003:1A2C:2D23.0003: input,hidraw2: USB HID v1.10 Device [USB USB Keyboard] on usb-0000:00:14.0-12/input1
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/vg_teste-lv_root
dracut: Loading SELinux policy
type=1404 audit(1470170314.652:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
usb-storage: device scan complete
scsi 10:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 6
sd 10:0:0:0: [sdb] 15630336 512-byte logical blocks: (8.00 GB/7.45 GiB)
sd 10:0:0:0: [sdb] Write Protect is off
sd 10:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 10:0:0:0: [sdb] Assuming drive cache: write through
sd 10:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 10:0:0:0: [sdb] Assuming drive cache: write through
sd 10:0:0:0: [sdb] Attached SCSI removable disk
SELinux: 2048 avtab hash slots, 306596 rules.
SELinux: 2048 avtab hash slots, 306596 rules.
SELinux: 9 users, 12 roles, 4211 types, 236 bools, 1 sens, 1024 cats
SELinux: 81 classes, 306596 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1470170315.474:3): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
dca service started, version 1.12.1
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
alloc irq_desc for 32 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
igb 0000:05:00.0: setting latency timer to 64
alloc irq_desc for 70 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.0: irq 70 for MSI/MSI-X
igb 0000:05:00.0: irq 70 for MSI/MSI-X
alloc irq_desc for 71 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.0: irq 71 for MSI/MSI-X
alloc irq_desc for 72 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.0: irq 72 for MSI/MSI-X
alloc irq_desc for 73 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.0: irq 73 for MSI/MSI-X
alloc irq_desc for 74 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.0: irq 74 for MSI/MSI-X
alloc irq_desc for 75 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.0: irq 75 for MSI/MSI-X
alloc irq_desc for 76 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.0: irq 76 for MSI/MSI-X
igb 0000:05:00.0: added PHC on eth0
igb 0000:05:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:05:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 58:20:b1:03:41:22
igb 0000:05:00.0: eth0: PBA No: 0960FF-0FF
igb 0000:05:00.0: Using MSI-X interrupts. 6 rx queue(s), 6 tx queue(s)
alloc irq_desc for 36 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.1: PCI INT B -> GSI 36 (level, low) -> IRQ 36
igb 0000:05:00.1: setting latency timer to 64
alloc irq_desc for 77 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.1: irq 77 for MSI/MSI-X
igb 0000:05:00.1: irq 77 for MSI/MSI-X
alloc irq_desc for 78 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.1: irq 78 for MSI/MSI-X
alloc irq_desc for 79 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.1: irq 79 for MSI/MSI-X
alloc irq_desc for 80 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.1: irq 80 for MSI/MSI-X
alloc irq_desc for 81 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.1: irq 81 for MSI/MSI-X
alloc irq_desc for 82 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.1: irq 82 for MSI/MSI-X
alloc irq_desc for 83 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.1: irq 83 for MSI/MSI-X
igb 0000:05:00.1: added PHC on eth1
igb 0000:05:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:05:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 58:20:b1:03:41:23
igb 0000:05:00.1: eth1: PBA No: 0960FF-0FF
igb 0000:05:00.1: Using MSI-X interrupts. 6 rx queue(s), 6 tx queue(s)
ioatdma: Intel(R) QuickData Technology Driver 4.00
alloc irq_desc for 31 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
ioatdma 0000:00:04.0: setting latency timer to 64
alloc irq_desc for 84 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.0: irq 84 for MSI/MSI-X
igb 0000:05:00.0: DCA enabled
igb 0000:05:00.1: DCA enabled
alloc irq_desc for 39 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.1: PCI INT B -> GSI 39 (level, low) -> IRQ 39
ioatdma 0000:00:04.1: setting latency timer to 64
alloc irq_desc for 85 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.1: irq 85 for MSI/MSI-X
ioatdma 0000:00:04.2: PCI INT C -> GSI 31 (level, low) -> IRQ 31
ioatdma 0000:00:04.2: setting latency timer to 64
alloc irq_desc for 86 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.2: irq 86 for MSI/MSI-X
ioatdma 0000:00:04.3: PCI INT D -> GSI 39 (level, low) -> IRQ 39
ioatdma 0000:00:04.3: setting latency timer to 64
alloc irq_desc for 87 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.3: irq 87 for MSI/MSI-X
ioatdma 0000:00:04.4: PCI INT A -> GSI 31 (level, low) -> IRQ 31
ioatdma 0000:00:04.4: setting latency timer to 64
alloc irq_desc for 88 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.4: irq 88 for MSI/MSI-X
ioatdma 0000:00:04.5: PCI INT B -> GSI 39 (level, low) -> IRQ 39
ioatdma 0000:00:04.5: setting latency timer to 64
alloc irq_desc for 89 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.5: irq 89 for MSI/MSI-X
ioatdma 0000:00:04.6: PCI INT C -> GSI 31 (level, low) -> IRQ 31
ioatdma 0000:00:04.6: setting latency timer to 64
alloc irq_desc for 90 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.6: irq 90 for MSI/MSI-X
ioatdma 0000:00:04.7: PCI INT D -> GSI 39 (level, low) -> IRQ 39
ioatdma 0000:00:04.7: setting latency timer to 64
alloc irq_desc for 91 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.7: irq 91 for MSI/MSI-X
hpilo 0000:01:00.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
hpilo 0000:01:00.2: setting latency timer to 64
hpwdt 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
hpwdt: New timer passed in is 30 seconds.
hpwdt 0000:01:00.0: HP Watchdog Timer Driver: NMI decoding initialized, allow kernel dump: ON (default = 1/ON)
, priority: LAST (default = 0/LAST).
hpwdt 0000:01:00.0: HP Watchdog Timer Driver: 1.3.3-rh, timer margin: 30 seconds (nowayout=0).
i801_smbus 0000:00:1f.3: enabling device (0000 -> 0003)
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
i801_smbus 0000:00:1f.3: SMBus using polling
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 8:0:0:0: Attached scsi generic sg1 type 5
sd 10:0:0:0: Attached scsi generic sg2 type 0
EDAC MC: Ver: 2.1.0 May 10 2016
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2f60
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fac
EDAC sbridge: Seeking for: PCI ID 8086:2fac
EDAC sbridge: Seeking for: PCI ID 8086:2fad
EDAC sbridge: Seeking for: PCI ID 8086:2fad
EDAC sbridge: Seeking for: PCI ID 8086:2fbd
EDAC sbridge: Seeking for: PCI ID 8086:2fbd
EDAC sbridge: Seeking for: PCI ID 8086:2fbf
EDAC sbridge: Seeking for: PCI ID 8086:2fbf
EDAC sbridge: Seeking for: PCI ID 8086:2fb9
EDAC sbridge: Seeking for: PCI ID 8086:2fb9
EDAC sbridge: Seeking for: PCI ID 8086:2fbb
EDAC sbridge: Seeking for: PCI ID 8086:2fbb
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f79
EDAC sbridge: Seeking for: PCI ID 8086:2f6a
EDAC sbridge: Seeking for: PCI ID 8086:2f6b
EDAC sbridge: Seeking for: PCI ID 8086:2f6c
EDAC sbridge: Seeking for: PCI ID 8086:2f6d
EDAC MC0: Giving out device to 'sbridge_edac.c' 'Haswell Socket#0': DEV 0000:ff:12.0
EDAC sbridge: Ver: 1.1.1
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: probing via ACPI
ipmi_si 00:09: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca3 regsize 1 spacing 1 irq 0
ipmi_si: Adding SPMI-specified kcs state machine
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si 00:09: Found new BMC (man_id: 0x00000b, prod_id: 0x2000, dev_id: 0x13)
ipmi_si 00:09: IPMI kcs interface initialized
power_meter ACPI000D:00: Found ACPI power meter.
microcode: CPU0 sig=0x306f2, pf=0x1, revision=0x38
platform microcode: firmware: requesting intel-ucode/06-3f-02
microcode: CPU1 sig=0x306f2, pf=0x1, revision=0x38
platform microcode: firmware: requesting intel-ucode/06-3f-02
microcode: CPU2 sig=0x306f2, pf=0x1, revision=0x38
platform microcode: firmware: requesting intel-ucode/06-3f-02
microcode: CPU3 sig=0x306f2, pf=0x1, revision=0x38
platform microcode: firmware: requesting intel-ucode/06-3f-02
microcode: CPU4 sig=0x306f2, pf=0x1, revision=0x38
platform microcode: firmware: requesting intel-ucode/06-3f-02
microcode: CPU5 sig=0x306f2, pf=0x1, revision=0x38
platform microcode: firmware: requesting intel-ucode/06-3f-02
Microcode Update Driver: v2.00 , Peter Oruba
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11rh
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sda2, type ext4), uses xattr
SELinux: initialized (dev sda1, type vfat), uses genfs_contexts
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev dm-2, type ext4), uses xattr
Adding 8101884k swap on /dev/mapper/vg_teste-lv_swap. Priority:-1 extents:1 across:8101884k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
ADDRCONF(NETDEV_UP): eth0: link is not ready
igb 0000:05:00.0: eth0: igb: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
type=1305 audit(1470170336.996:4): audit_pid=2158 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
pcc-cpufreq: (v1.00.00) driver loaded with frequency limits: 1200 MHz, 1600 MHz
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
8021q: adding VLAN 0 to HW filter on device eth0
ADDRCONF(NETDEV_UP): eth1: link is not ready
8021q: adding VLAN 0 to HW filter on device eth1
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
eth0: no IPv6 routers present
pci 0000:01:00.1: Invalid ROM contents
pci 0000:01:00.1: Invalid ROM contents
fuse init (API version 7.14)
SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
usb 4-9: USB disconnect, device number 3
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
usb 4-9: new high speed USB device number 6 using xhci_hcd
usb 4-9: New USB device found, idVendor=0781, idProduct=5567
usb 4-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-9: Product: Cruzer Blade
usb 4-9: Manufacturer: SanDisk
usb 4-9: SerialNumber: 4C530013421203120122
usb 4-9: configuration #1 chosen from 1 choice
scsi11 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 11:0:0:0: Direct-Access SanDisk Cruzer Blade 1.27 PQ: 0 ANSI: 6
sd 11:0:0:0: Attached scsi generic sg2 type 0
sd 11:0:0:0: [sdb] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 11:0:0:0: [sdb] Write Protect is off
sd 11:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 11:0:0:0: [sdb] Assuming drive cache: write through
sd 11:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 11:0:0:0: [sdb] Assuming drive cache: write through
sd 11:0:0:0: [sdb] Attached SCSI removable disk
SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts