dmesg - 1
microcode: microcode updated early to revision 0x710, date = 2013-06-17
Linux version 4.6.3-1607141 (root@snowy) (gcc version 5.4.0 20160609 (Debian 5.4.0-6) ) #1 SMP PREEMPT Thu Jul 14 23:35:43 AEST 2016
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bca50fff] usable
BIOS-e820: [mem 0x00000000bca51000-0x00000000bcb6afff] ACPI NVS
BIOS-e820: [mem 0x00000000bcb6b000-0x00000000bce91fff] reserved
BIOS-e820: [mem 0x00000000bce92000-0x00000000bcf09fff] ACPI data
BIOS-e820: [mem 0x00000000bcf0a000-0x00000000bcf2cfff] reserved
BIOS-e820: [mem 0x00000000bcf2d000-0x00000000bcf31fff] ACPI NVS
BIOS-e820: [mem 0x00000000bcf32000-0x00000000bcf50fff] reserved
BIOS-e820: [mem 0x00000000bcf51000-0x00000000bcf51fff] ACPI NVS
BIOS-e820: [mem 0x00000000bcf52000-0x00000000bcf54fff] reserved
BIOS-e820: [mem 0x00000000bcf55000-0x00000000bcf5cfff] ACPI NVS
BIOS-e820: [mem 0x00000000bcf5d000-0x00000000bcf87fff] reserved
BIOS-e820: [mem 0x00000000bcf88000-0x00000000bd18afff] ACPI NVS
BIOS-e820: [mem 0x00000000bd18b000-0x00000000bd47dfff] usable
BIOS-e820: [mem 0x00000000bd47e000-0x00000000bd7dafff] reserved
BIOS-e820: [mem 0x00000000bd7db000-0x00000000bd7fffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000083fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./X79-UD5, BIOS F12 07/05/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x840000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask 3FF800000000 write-back
1 base 000800000000 mask 3FFFC0000000 write-back
2 base 0000BE000000 mask 3FFFFE000000 uncachable
3 base 0000C0000000 mask 3FFFC0000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xbe000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbd800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcd10-0x000fcd1f] mapped at [ffff8800000fcd10]
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0x01d18000, 0x01d18fff] PGTABLE
BRK [0x01d19000, 0x01d19fff] PGTABLE
BRK [0x01d1a000, 0x01d1afff] PGTABLE
BRK [0x01d1b000, 0x01d1bfff] PGTABLE
BRK [0x01d1c000, 0x01d1cfff] PGTABLE
BRK [0x01d1d000, 0x01d1dfff] PGTABLE
RAMDISK: [mem 0x37eac000-0x37f4dfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BCE92070 000064 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000BCE9A0C8 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000BCE92168 007F5F (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 0x00000000BCF5AF80 000040
ACPI: APIC 0x00000000BCE9A1C0 0000B2 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000BCE9A278 00003C (v01 ALASKA OEMMCFG. 01072009 MSFT 00000097)
ACPI: HPET 0x00000000BCE9A2B8 000038 (v01 ALASKA A M I 01072009 AMI. 00000004)
ACPI: SSDT 0x00000000BCE9A2F0 06F0C4 (v02 INTEL CpuPm 00004000 INTL 20051117)
ACPI: MATS 0x00000000BCF093B8 000034 (v01 ALASKA A M I 00000001 w?x2 00000000)
ACPI: DMAR 0x00000000BCF093F0 0000C4 (v01 A M I OEMDMAR 00000001 INTL 00000001)
ACPI: MATS 0x00000000BCF094B8 000034 (v02 ALASKA A M I 00000002 w?x2 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000083fffffff]
NODE_DATA(0) allocated [mem 0x83fff9000-0x83fffdfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000083fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x00000000bca50fff]
node 0: [mem 0x00000000bd18b000-0x00000000bd47dfff]
node 0: [mem 0x00000000bd7db000-0x00000000bd7fffff]
node 0: [mem 0x0000000100000000-0x000000083fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000083fffffff]
On node 0 totalpages: 8375558
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 12022 pages used for memmap
DMA32 zone: 769385 pages, LIFO batch:31
Normal zone: 118784 pages used for memmap
Normal zone: 7602176 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 12 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbca51000-0xbcb6afff]
PM: Registered nosave memory: [mem 0xbcb6b000-0xbce91fff]
PM: Registered nosave memory: [mem 0xbce92000-0xbcf09fff]
PM: Registered nosave memory: [mem 0xbcf0a000-0xbcf2cfff]
PM: Registered nosave memory: [mem 0xbcf2d000-0xbcf31fff]
PM: Registered nosave memory: [mem 0xbcf32000-0xbcf50fff]
PM: Registered nosave memory: [mem 0xbcf51000-0xbcf51fff]
PM: Registered nosave memory: [mem 0xbcf52000-0xbcf54fff]
PM: Registered nosave memory: [mem 0xbcf55000-0xbcf5cfff]
PM: Registered nosave memory: [mem 0xbcf5d000-0xbcf87fff]
PM: Registered nosave memory: [mem 0xbcf88000-0xbd18afff]
PM: Registered nosave memory: [mem 0xbd47e000-0xbd7dafff]
PM: Registered nosave memory: [mem 0xbd800000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xbd800000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:12 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
percpu: Embedded 32 pages/cpu @ffff88083fc00000 s93336 r8192 d29544 u131072
pcpu-alloc: s93336 r8192 d29544 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
Built 1 zonelists in Node order, mobility grouping on. Total pages: 8244667
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32895904K/33502232K available (5958K kernel code, 1079K rwdata, 2668K rodata, 1264K init, 788K bss, 606328K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
NR_IRQS:4352 nr_irqs:520 16
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3200.012 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6402.69 BogoMIPS (lpj=10666706)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160108
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: disabled by default; enable with sysctl kernel.yama.*
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
Disabling memory control group subsystem
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 18 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 24K (ffffffff81c4b000 - ffffffff81c51000)
ftrace: allocating 24416 entries in 96 pages
smpboot: Max logical packages: 2
smpboot: APIC(0) Converting physical 0 to logical package 0
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffc000 flags: 0x1
DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0462 ecap f020ff
DMAR: RMRR base: 0x000000bcf10000 end: 0x000000bcf2cfff
DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0
DMAR-IR: IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfbffc000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-3930K CPU @ 3.20GHz (family: 0x6, model: 0x2d, stepping: 0x7)
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
x86: Booted up 1 node, 12 CPUs
smpboot: Total of 12 processors activated (76847.39 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xbca51000-0xbcb6afff] (1155072 bytes)
PM: Registering ACPI NVS region [mem 0xbcf2d000-0xbcf31fff] (20480 bytes)
PM: Registering ACPI NVS region [mem 0xbcf51000-0xbcf51fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xbcf55000-0xbcf5cfff] (32768 bytes)
PM: Registering ACPI NVS region [mem 0xbcf88000-0xbd18afff] (2109440 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfbffffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [8086:3c20] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [mem 0xfb740000-0xfb743fff 64bit]
pci 0000:00:04.1: [8086:3c21] type 00 class 0x088000
pci 0000:00:04.1: reg 0x10: [mem 0xfb73c000-0xfb73ffff 64bit]
pci 0000:00:04.2: [8086:3c22] type 00 class 0x088000
pci 0000:00:04.2: reg 0x10: [mem 0xfb738000-0xfb73bfff 64bit]
pci 0000:00:04.3: [8086:3c23] type 00 class 0x088000
pci 0000:00:04.3: reg 0x10: [mem 0xfb734000-0xfb737fff 64bit]
pci 0000:00:04.4: [8086:3c24] type 00 class 0x088000
pci 0000:00:04.4: reg 0x10: [mem 0xfb730000-0xfb733fff 64bit]
pci 0000:00:04.5: [8086:3c25] type 00 class 0x088000
pci 0000:00:04.5: reg 0x10: [mem 0xfb72c000-0xfb72ffff 64bit]
pci 0000:00:04.6: [8086:3c26] type 00 class 0x088000
pci 0000:00:04.6: reg 0x10: [mem 0xfb728000-0xfb72bfff 64bit]
pci 0000:00:04.7: [8086:3c27] type 00 class 0x088000
pci 0000:00:04.7: reg 0x10: [mem 0xfb724000-0xfb727fff 64bit]
pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfb74a000-0xfb74afff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb749000-0xfb74900f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfb700000-0xfb71ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfb748000-0xfb748fff]
pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb747000-0xfb7473ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfb720000-0xfb723fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1d14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1d16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:1d1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:1d1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:1d1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb746000-0xfb7463ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfb745000-0xfb7457ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb744000-0xfb7440ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [10de:13c2] type 00 class 0x030000
pci 0000:02:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:02:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:02:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:02:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:02:00.1: [10de:0fbb] type 00 class 0x040300
pci 0000:02:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:11.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [1b4b:9172] type 00 class 0x010601
pci 0000:05:00.0: reg 0x10: [io 0xd040-0xd047]
pci 0000:05:00.0: reg 0x14: [io 0xd030-0xd033]
pci 0000:05:00.0: reg 0x18: [io 0xd020-0xd027]
pci 0000:05:00.0: reg 0x1c: [io 0xd010-0xd013]
pci 0000:05:00.0: reg 0x20: [io 0xd000-0xd00f]
pci 0000:05:00.0: reg 0x24: [mem 0xfb610000-0xfb6101ff]
pci 0000:05:00.0: reg 0x30: [mem 0xfb600000-0xfb60ffff pref]
pci 0000:05:00.0: PME# supported from D3hot
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: bridge window [mem 0xfb600000-0xfb6fffff]
pci 0000:06:00.0: [1b4b:9172] type 00 class 0x010601
pci 0000:06:00.0: reg 0x10: [io 0xc040-0xc047]
pci 0000:06:00.0: reg 0x14: [io 0xc030-0xc033]
pci 0000:06:00.0: reg 0x18: [io 0xc020-0xc027]
pci 0000:06:00.0: reg 0x1c: [io 0xc010-0xc013]
pci 0000:06:00.0: reg 0x20: [io 0xc000-0xc00f]
pci 0000:06:00.0: reg 0x24: [mem 0xfb510000-0xfb5101ff]
pci 0000:06:00.0: reg 0x30: [mem 0xfb500000-0xfb50ffff pref]
pci 0000:06:00.0: PME# supported from D3hot
pci 0000:00:1c.1: PCI bridge to [bus 06]
pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.1: bridge window [mem 0xfb500000-0xfb5fffff]
pci 0000:00:1c.2: PCI bridge to [bus 07]
pci 0000:00:1c.3: PCI bridge to [bus 08]
pci 0000:09:00.0: [1b73:1009] type 00 class 0x0c0330
pci 0000:09:00.0: reg 0x10: [mem 0xfb400000-0xfb40ffff 64bit]
pci 0000:09:00.0: reg 0x18: [mem 0xfb411000-0xfb411fff 64bit]
pci 0000:09:00.0: reg 0x20: [mem 0xfb410000-0xfb410fff 64bit]
pci 0000:09:00.0: supports D1
pci 0000:09:00.0: PME# supported from D0 D1 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 09]
pci 0000:00:1c.5: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:0a:00.0: [1b73:1009] type 00 class 0x0c0330
pci 0000:0a:00.0: reg 0x10: [mem 0xfb300000-0xfb30ffff 64bit]
pci 0000:0a:00.0: reg 0x18: [mem 0xfb311000-0xfb311fff 64bit]
pci 0000:0a:00.0: reg 0x20: [mem 0xfb310000-0xfb310fff 64bit]
pci 0000:0a:00.0: supports D1
pci 0000:0a:00.0: PME# supported from D0 D1 D3hot D3cold
pci 0000:00:1c.6: PCI bridge to [bus 0a]
pci 0000:00:1c.6: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:0b:00.0: [1b4b:9172] type 00 class 0x010601
pci 0000:0b:00.0: reg 0x10: [io 0xb040-0xb047]
pci 0000:0b:00.0: reg 0x14: [io 0xb030-0xb033]
pci 0000:0b:00.0: reg 0x18: [io 0xb020-0xb027]
pci 0000:0b:00.0: reg 0x1c: [io 0xb010-0xb013]
pci 0000:0b:00.0: reg 0x20: [io 0xb000-0xb00f]
pci 0000:0b:00.0: reg 0x24: [mem 0xfb210000-0xfb2101ff]
pci 0000:0b:00.0: reg 0x30: [mem 0xfb200000-0xfb20ffff pref]
pci 0000:0b:00.0: PME# supported from D3hot
pci 0000:00:1c.7: PCI bridge to [bus 0b]
pci 0000:00:1c.7: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.7: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:0c:03.0: [1106:3044] type 00 class 0x0c0010
pci 0000:0c:03.0: reg 0x10: [mem 0xfb100000-0xfb1007ff]
pci 0000:0c:03.0: reg 0x14: [io 0xa000-0xa07f]
pci 0000:0c:03.0: supports D2
pci 0000:0c:03.0: PME# supported from D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 0c] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
pci 0000:00:1e.0: bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfbffffff window] (subtractive decode)
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:ff:08.3: [8086:3c83] type 00 class 0x088000
pci 0000:ff:08.4: [8086:3c84] type 00 class 0x088000
pci 0000:ff:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:ff:09.3: [8086:3c93] type 00 class 0x088000
pci 0000:ff:09.4: [8086:3c94] type 00 class 0x088000
pci 0000:ff:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:ff:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:ff:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:ff:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:ff:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:ff:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.2: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:ff:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:ff:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:ff:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:ff:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:ff:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:ff:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:ff:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:ff:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:ff:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:ff:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:ff:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:ff:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:ff:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:ff:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:ff:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:ff:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:ff:13.6: [8086:3c45] type 00 class 0x088000
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: Enabled 2 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:02:00.0
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbca51000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbd47e000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbd800000-0xbfffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed45000-0xfedfffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0a00-0x0a0f] has been reserved
system 00:01: [io 0x0a30-0x0a3f] has been reserved
system 00:01: [io 0x0a20-0x0a2f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x0400-0x0453] could not be reserved
system 00:05: [io 0x0458-0x047f] has been reserved
system 00:05: [io 0x1180-0x119f] has been reserved
system 00:05: [io 0x0500-0x057f] has been reserved
system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:06: [io 0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:11.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: bridge window [mem 0xfb600000-0xfb6fffff]
pci 0000:00:1c.1: PCI bridge to [bus 06]
pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.1: bridge window [mem 0xfb500000-0xfb5fffff]
pci 0000:00:1c.2: PCI bridge to [bus 07]
pci 0000:00:1c.3: PCI bridge to [bus 08]
pci 0000:00:1c.5: PCI bridge to [bus 09]
pci 0000:00:1c.5: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:00:1c.6: PCI bridge to [bus 0a]
pci 0000:00:1c.6: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:00:1c.7: PCI bridge to [bus 0b]
pci 0000:00:1c.7: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.7: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0c]
pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
pci 0000:00:1e.0: bridge window [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfbffffff window]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:02: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xfb600000-0xfb6fffff]
pci_bus 0000:06: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:06: resource 1 [mem 0xfb500000-0xfb5fffff]
pci_bus 0000:09: resource 1 [mem 0xfb400000-0xfb4fffff]
pci_bus 0000:0a: resource 1 [mem 0xfb300000-0xfb3fffff]
pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:0b: resource 1 [mem 0xfb200000-0xfb2fffff]
pci_bus 0000:0c: resource 0 [io 0xa000-0xafff]
pci_bus 0000:0c: resource 1 [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:0c: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:0c: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:0c: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:0c: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:0c: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:0c: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:0c: resource 10 [mem 0xc0000000-0xfbffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 648K (ffff880037eac000 - ffff880037f4e000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb8a51000-0xbca51000] (64MB) mapped at [ffff8800b8a51000-ffff8800bca50fff]
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain dram 2^-16 Joules
futex hash table entries: 4096 (order: 6, 262144 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1469287184.373:1): initialized
Initialise system trusted keyring
workingset: timestamp_bits=37 max_order=23 bucket_order=0
zbud: loaded
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:11.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:11.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
pci 0000:0a:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
pci 0000:0b:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4.1 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
Linux agpgart interface v0.103
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Intel P-state driver initializing.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
microcode: CPU0 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU1 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU2 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU3 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU4 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU5 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU6 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU7 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU8 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU9 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU10 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU11 sig=0x206d7, pf=0x4, revision=0x710
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
rtc_cmos 00:03: setting system clock to 2016-07-23 15:19:44 UTC (1469287184)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1264K (ffffffff81b0f000 - ffffffff81c4b000)
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 172K (ffff8800015d5000 - ffff880001600000)
Freeing unused kernel memory: 1428K (ffff88000189b000 - ffff880001a00000)
x86/mm: Checked W+X mappings: passed, no W+X pages found.
mbcache: module verification failed: signature and/or required key missing - tainting kernel
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag led clo pio ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xfb745000 port 0xfb745100 irq 36
ata2: SATA max UDMA/133 abar m2048@0xfb745000 port 0xfb745180 irq 36
ata3: SATA max UDMA/133 abar m2048@0xfb745000 port 0xfb745200 irq 36
ata4: SATA max UDMA/133 abar m2048@0xfb745000 port 0xfb745280 irq 36
ata5: SATA max UDMA/133 abar m2048@0xfb745000 port 0xfb745300 irq 36
ata6: SATA max UDMA/133 abar m2048@0xfb745000 port 0xfb745380 irq 36
ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:05:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
scsi host6: ahci
scsi host7: ahci
ata7: SATA max UDMA/133 abar m512@0xfb610000 port 0xfb610100 irq 37
ata8: SATA max UDMA/133 abar m512@0xfb610000 port 0xfb610180 irq 37
ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:06:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
scsi host8: ahci
scsi host9: ahci
ata9: SATA max UDMA/133 abar m512@0xfb510000 port 0xfb510100 irq 38
ata10: SATA max UDMA/133 abar m512@0xfb510000 port 0xfb510180 irq 38
ahci 0000:0b:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:0b:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
scsi host10: ahci
scsi host11: ahci
ata11: SATA max UDMA/133 abar m512@0xfb210000 port 0xfb210100 irq 39
ata12: SATA max UDMA/133 abar m512@0xfb210000 port 0xfb210180 irq 39
ata9: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata1.00: READ LOG DMA EXT failed, trying unqueued
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM05B0Q, max UDMA/133
ata1.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 5B0Q PQ: 0 ANSI: 5
ata11: SATA link down (SStatus 0 SControl 300)
ata12: SATA link down (SStatus 0 SControl 300)
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata1.00: Enabling discard_zeroes_data
sda: sda1 sda2
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-8: ST3000DM001-9YN166, CC4B, max UDMA/133
ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST3000DM001-9YN1 CC4B PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
tsc: Refined TSC clocksource calibration: 3200.070 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e208c2ffec, max_idle_ns: 440795227658 ns
sdb: sdb1 sdb3 sdb4
sd 1:0:0:0: [sdb] Attached SCSI disk
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: ST3000DM001-9YN166, CC4B, max UDMA/133
ata3.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST3000DM001-9YN1 CC4B PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
sd 2:0:0:0: [sdc] 4096-byte physical blocks
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: HL-DT-ST BDDVDRW CH12LS28, 1.00, max UDMA/133
ata4.00: configured for UDMA/133
scsi 3:0:0:0: CD-ROM HL-DT-ST BDDVDRW CH12LS28 1.00 PQ: 0 ANSI: 5
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
clocksource: Switched to clocksource tsc
ata5.00: ATA-8: OCZ-VERTEX3 LT, 2.15, max UDMA/133
ata5.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA OCZ-VERTEX3 LT 2.15 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdd] 468862128 512-byte logical blocks: (240 GB/224 GiB)
sd 4:0:0:0: [sdd] Write Protect is off
sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1 sdd2
sd 4:0:0:0: [sdd] Attached SCSI disk
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-8: Corsair CSSD-F240GB2, 2.0, max UDMA/133
ata6.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA Corsair CSSD-F24 2.0 PQ: 0 ANSI: 5
sd 5:0:0:0: [sde] 468862128 512-byte logical blocks: (240 GB/224 GiB)
sd 5:0:0:0: [sde] Write Protect is off
sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1 sde2
sd 5:0:0:0: [sde] Attached SCSI disk
EXT4-fs (sdd1): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (sdd1): couldn't mount as ext2 due to feature incompatibilities
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts:
systemd[1]: RTC configured in localtime, applying delta of 600 minutes to system time.
random: systemd urandom read with 48 bits of entropy available
systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Mounting Debug File System...
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounting RPC Pipe File System...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Created slice system-getty.slice.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Starting File System Check on Root Device...
systemd[1]: Listening on RPCbind Server Activation Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Starting Nameserver information manager...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Mounting NFSD configuration filesystem...
systemd[1]: Listening on udev Control Socket.
systemd[1]: PNFS blkmaping enablement. is not active.
systemd[1]: Dependency failed for pNFS block layout mapping daemon.
systemd[1]: nfs-blkmap.service: Job nfs-blkmap.service/start failed with result 'dependency'.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started File System Check Daemon to report status.
systemd[1]: Starting Create Static Device Nodes in /dev...
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
systemd[1]: Started Nameserver information manager.
systemd[1]: Mounted RPC Pipe File System.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
systemd[1]: Mounted NFSD configuration filesystem.
it87: Found IT8728F chip at 0xa30, revision 1
it87: Beeping is supported
systemd[1]: Started File System Check on Root Device.
systemd[1]: Starting Remount Root and Kernel File Systems...
[drm] Initialized drm 1.1.0 20060810
systemd[1]: Started Journal Service.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:02:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 352.79 Wed Jan 13 16:17:53 PST 2016
random: nonblocking pool is initialized
EXT4-fs (sdd1): re-mounted. Opts: discard,user_xattr,errors=remount-ro
systemd-journald[209]: Received request to flush runtime journal from PID 1
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI Error: [\TST0] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.C000._TPC] (Node ffff88081f0c87f8), AE_NOT_FOUND (20160108/psparse-542)
ACPI Error: [\TST0] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.C002._TPC] (Node ffff88081f0d1398), AE_NOT_FOUND (20160108/psparse-542)
ACPI Error: [\TST0] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.C004._TPC] (Node ffff88081f0d8f28), AE_NOT_FOUND (20160108/psparse-542)
ACPI Error: [\TST0] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.C006._TPC] (Node ffff88081f0e0ac8), AE_NOT_FOUND (20160108/psparse-542)
ACPI Error: [\TST0] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.C008._TPC] (Node ffff88081f0e8668), AE_NOT_FOUND (20160108/psparse-542)
ACPI Error: [\TST0] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.C00A._TPC] (Node ffff88081f0f0208), AE_NOT_FOUND (20160108/psparse-542)
ACPI Error: [\TST0] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.C001._TPC] (Node ffff88081f0cd5c8), AE_NOT_FOUND (20160108/psparse-542)
ACPI Error: [\TST0] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.C003._TPC] (Node ffff88081f0d5168), AE_NOT_FOUND (20160108/psparse-542)
ACPI Error: [\TST0] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.C005._TPC] (Node ffff88081f0dccf8), AE_NOT_FOUND (20160108/psparse-542)
ACPI Error: [\TST0] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.C007._TPC] (Node ffff88081f0e4898), AE_NOT_FOUND (20160108/psparse-542)
ACPI Error: [\TST0] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.C009._TPC] (Node ffff88081f0ec438), AE_NOT_FOUND (20160108/psparse-542)
ACPI Error: [\TST0] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.C00B._TPC] (Node ffff88081f0f3fc8), AE_NOT_FOUND (20160108/psparse-542)
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
wmi: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
dca service started, version 1.12.1
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
PTP clock support registered
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ioatdma: Intel(R) QuickData Technology Driver 4.00
ioatdma 0000:00:04.0: can't derive routing for PCI INT A
ioatdma 0000:00:04.0: PCI INT A: not connected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
scsi 3:0:0:0: Attached scsi generic sg3 type 5
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 5:0:0:0: Attached scsi generic sg5 type 0
ehci-pci: EHCI PCI platform driver
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
xhci_hcd 0000:09:00.0: xHCI Host Controller
xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:09:00.0: hcc params 0x200073a1 hci version 0x100 quirks 0x00000010
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.6.3-1607141 xhci-hcd
usb usb1: SerialNumber: 0000:09:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:09:00.0: xHCI Host Controller
xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.6.3-1607141 xhci-hcd
usb usb2: SerialNumber: 0000:09:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:0a:00.0: xHCI Host Controller
xhci_hcd 0000:0a:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:0a:00.0: hcc params 0x200073a1 hci version 0x100 quirks 0x00000010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.6.3-1607141 xhci-hcd
usb usb3: SerialNumber: 0000:0a:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:0a:00.0: xHCI Host Controller
xhci_hcd 0000:0a:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.6.3-1607141 xhci-hcd
usb usb4: SerialNumber: 0000:0a:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ioatdma 0000:00:04.1: can't derive routing for PCI INT B
ioatdma 0000:00:04.1: PCI INT B: not connected
ioatdma 0000:00:04.2: can't derive routing for PCI INT C
ioatdma 0000:00:04.2: PCI INT C: not connected
EDAC MC: Ver: 3.0.0
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
input: PC Speaker as /devices/platform/pcspkr/input/input3
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
firewire_ohci 0000:0c:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
sr 3:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Patsburg TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Adding 37887996k swap on /dev/sdb1. Priority:-1 extents:1 across:37887996k FS
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 50:e5:49:e6:88:33
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 5
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xfb747000
fuse init (API version 7.24)
EXT4-fs (sdd2): mounted filesystem with ordered data mode. Opts: discard,user_xattr
EXT4-fs (sde2): mounted filesystem with ordered data mode. Opts: discard,user_xattr
usb 3-1: new high-speed USB device number 2 using xhci_hcd
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 4.6.3-1607141 ehci_hcd
usb usb5: SerialNumber: 0000:00:1a.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 6
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfb746000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: EHCI Host Controller
usb usb6: Manufacturer: Linux 4.6.3-1607141 ehci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
snd_hda_intel 0000:02:00.1: Disabling MSI
snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client
ioatdma 0000:00:04.3: can't derive routing for PCI INT D
ioatdma 0000:00:04.3: PCI INT D: not connected
usb 3-1: New USB device found, idVendor=0451, idProduct=8043
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 3-1: SerialNumber: 57010059CB52
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 3 ports detected
snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC898: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D2: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D2: inputs:
snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
ioatdma 0000:00:04.4: can't derive routing for PCI INT A
ioatdma 0000:00:04.4: PCI INT A: not connected
firewire_core 0000:0c:03.0: created device fw0: GUID 00656f1cd2e89b00, S400
ioatdma 0000:00:04.5: can't derive routing for PCI INT B
ioatdma 0000:00:04.5: PCI INT B: not connected
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
ioatdma 0000:00:04.6: can't derive routing for PCI INT C
ioatdma 0000:00:04.6: PCI INT C: not connected
ioatdma 0000:00:04.7: can't derive routing for PCI INT D
ioatdma 0000:00:04.7: PCI INT D: not connected
EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: user_xattr
usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
usb 4-1: New USB device found, idVendor=0451, idProduct=8041
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 3 ports detected
usb 5-1: new high-speed USB device number 2 using ehci-pci
EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: user_xattr
usb 5-1: New USB device found, idVendor=8087, idProduct=0024
usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 6 ports detected
usb 3-1.3: new high-speed USB device number 3 using xhci_hcd
usb 6-1: new high-speed USB device number 2 using ehci-pci
usb 3-1.3: New USB device found, idVendor=0451, idProduct=8043
usb 3-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 3-1.3: SerialNumber: 710100717C41
hub 3-1.3:1.0: USB hub found
hub 3-1.3:1.0: 3 ports detected
usb 4-1.3: new SuperSpeed USB device number 3 using xhci_hcd
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input11
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input12
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input14
usb 6-1: New USB device found, idVendor=8087, idProduct=0024
usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 6-1:1.0: USB hub found
hub 6-1:1.0: 8 ports detected
usb 4-1.3: New USB device found, idVendor=0451, idProduct=8041
usb 4-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1.3:1.0: USB hub found
hub 4-1.3:1.0: 3 ports detected
usb 5-1.3: new full-speed USB device number 3 using ehci-pci
usb 5-1.3: New USB device found, idVendor=046d, idProduct=c066
usb 5-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1.3: Product: G9x Laser Mouse
usb 5-1.3: Manufacturer: Logitech
usb 5-1.3: SerialNumber: 38EF058D1D0011
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech G9x Laser Mouse as /devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.3/5-1.3:1.0/0003:046D:C066.0001/input/input15
hid-generic 0003:046D:C066.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech G9x Laser Mouse] on usb-0000:00:1a.0-1.3/input0
input: Logitech G9x Laser Mouse as /devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.3/5-1.3:1.1/0003:046D:C066.0002/input/input16
usb 6-1.2: new full-speed USB device number 3 using ehci-pci
usb 4-1.3.3: new SuperSpeed USB device number 4 using xhci_hcd
systemd[1]: apt-daily.timer: Adding 2h 34min 47.644440s random time.
hid-generic 0003:046D:C066.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech G9x Laser Mouse] on usb-0000:00:1a.0-1.3/input1
usb 6-1.2: New USB device found, idVendor=046d, idProduct=0a0f
usb 6-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1.2: Product: Z Cinéma
usb 6-1.2: Manufacturer: Logitech
input: Logitech Z Cinéma as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.2/0003:046D:0A0F.0003/input/input17
usb 4-1.3.3: New USB device found, idVendor=0bda, idProduct=0307
usb 4-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-1.3.3: Product: USB3.0 Card Reader
usb 4-1.3.3: Manufacturer: Realtek
usb 4-1.3.3: SerialNumber: 201006010301
usb-storage 4-1.3.3:1.0: USB Mass Storage device detected
scsi host12: usb-storage 4-1.3.3:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
hid-generic 0003:046D:0A0F.0003: input,hiddev0,hidraw2: USB HID v1.00 Keyboard [Logitech Z Cinéma] on usb-0000:00:1d.0-1.2/input2
systemd[1]: apt-daily.timer: Adding 6h 30min 7.223092s random time.
usb 6-1.2: 1:1: cannot get freq at ep 0x1
usbcore: registered new interface driver snd-usb-audio
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net ffffffff81ad3800)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
scsi 12:0:0:0: Direct-Access Generic- SD/MMC/MS/MSPRO 1.00 PQ: 0 ANSI: 6
sd 12:0:0:0: Attached scsi generic sg6 type 0
sd 12:0:0:0: [sdf] Attached SCSI removable disk
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
systemd[1]: apt-daily.timer: Adding 11h 20min 44.023209s random time.
vboxdrv: Found 12 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3200215845 Hz
vboxdrv: Successfully loaded version 5.0.24_Debian (interface 0x00240000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
usb 6-1.2: 1:1: cannot get freq at ep 0x1
usb 6-1.2: 1:1: cannot get freq at ep 0x1
usb 6-1.2: 1:1: cannot get freq at ep 0x1
usb 6-1.2: 1:1: cannot get freq at ep 0x1
usb 6-1.2: 1:1: cannot get freq at ep 0x1
usb 6-1.2: 1:1: cannot get freq at ep 0x1
usb 6-1.2: 1:1: cannot get freq at ep 0x1
usb 6-1.2: 1:1: cannot get freq at ep 0x1
usb 6-1.2: 1:1: cannot get freq at ep 0x1
usb 6-1.2: 1:1: cannot get freq at ep 0x1