dmesg - 2016-07-20

Return To 2016-07-20 System Information

reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable
reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x000000007c581017] usable
reserve setup_data: [mem 0x000000007c581018-0x000000007c58e857] usable
reserve setup_data: [mem 0x000000007c58e858-0x000000007c58f017] usable
reserve setup_data: [mem 0x000000007c58f018-0x000000007c59f057] usable
reserve setup_data: [mem 0x000000007c59f058-0x000000007dee3fff] usable
reserve setup_data: [mem 0x000000007dee4000-0x000000007dee4fff] ACPI NVS
reserve setup_data: [mem 0x000000007dee5000-0x000000007defefff] reserved
reserve setup_data: [mem 0x000000007deff000-0x000000008618afff] usable
reserve setup_data: [mem 0x000000008618b000-0x000000008644efff] reserved
reserve setup_data: [mem 0x000000008644f000-0x0000000086656fff] usable
reserve setup_data: [mem 0x0000000086657000-0x0000000086dacfff] ACPI NVS
reserve setup_data: [mem 0x0000000086dad000-0x00000000873fefff] reserved
reserve setup_data: [mem 0x00000000873ff000-0x00000000873fffff] usable
reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000026dffffff] usable
efi: EFI v2.40 by American Megatrends
efi:  ESRT=0x87257f98  ACPI=0x86d67000  ACPI 2.0=0x86d67000  SMBIOS=0xf05e0  MPS=0xfc9d0 
esrt: Reserving ESRT space from 0x0000000087257f98 to 0x0000000087257fd0.
SMBIOS 3.0 present.
DMI: MSI MS-7972/B150M MORTAR (MS-7972), BIOS C.40 02/26/2016
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x26e000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 00C0000000 mask 7FC0000000 uncachable
  1 base 00A0000000 mask 7FE0000000 uncachable
  2 base 0090000000 mask 7FF0000000 uncachable
  3 base 0088000000 mask 7FF8000000 uncachable
  4 base 0087800000 mask 7FFF800000 uncachable
  5 disabled
  6 disabled
  7 disabled
  8 disabled
  9 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
e820: last_pfn = 0x87400 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcbf0-0x000fcbff] mapped at [ffff8800000fcbf0]
Base memory trampoline at [ffff880000096000] 96000 size 24576
Using GB pages for direct mapping
BRK [0x22140000, 0x22140fff] PGTABLE
BRK [0x22141000, 0x22141fff] PGTABLE
BRK [0x22142000, 0x22142fff] PGTABLE
BRK [0x22143000, 0x22143fff] PGTABLE
BRK [0x22144000, 0x22144fff] PGTABLE
BRK [0x22145000, 0x22145fff] PGTABLE
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x0000000086D67000 000024 (v02 ALASKA)
ACPI: XSDT 0x0000000086D67098 0000B4 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x0000000086D8AA08 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x0000000086D671E8 02381D (v02 ALASKA A M I    01072009 INTL 20120913)
ACPI: FACS 0x0000000086DACF80 000040
ACPI: APIC 0x0000000086D8AB18 000068 (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x0000000086D8AB80 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FIDT 0x0000000086D8ABC8 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: MCFG 0x0000000086D8AC68 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
ACPI: HPET 0x0000000086D8ACA8 000038 (v01 ALASKA A M I    01072009 AMI. 0005000B)
ACPI: SSDT 0x0000000086D8ACE0 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
ACPI: LPIT 0x0000000086D8B050 000094 (v01 INTEL  SKL      00000000 MSFT 0000005F)
ACPI: SSDT 0x0000000086D8B0E8 000248 (v02 INTEL  sensrhub 00000000 INTL 20120913)
ACPI: SSDT 0x0000000086D8B330 002BAE (v02 INTEL  PtidDevc 00001000 INTL 20120913)
ACPI: SSDT 0x0000000086D8DEE0 000BE3 (v02 INTEL  Ther_Rvp 00001000 INTL 20120913)
ACPI: DBGP 0x0000000086D8EAC8 000034 (v01 INTEL           00000000 MSFT 0000005F)
ACPI: DBG2 0x0000000086D8EB00 000054 (v00 INTEL           00000000 MSFT 0000005F)
ACPI: SSDT 0x0000000086D8EB58 00062E (v02 INTEL  xh_rvp08 00000000 INTL 20120913)
ACPI: SSDT 0x0000000086D8F188 0054A2 (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
ACPI: UEFI 0x0000000086D94630 000042 (v01                 00000000      00000000)
ACPI: SSDT 0x0000000086D94678 000E73 (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
ACPI: BGRT 0x0000000086D954F0 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000026dffffff]
NODE_DATA(0) allocated [mem 0x26dff9000-0x26dffafff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000026dffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x0000000000057fff]
  node   0: [mem 0x0000000000059000-0x000000000009efff]
  node   0: [mem 0x0000000000100000-0x000000007dee3fff]
  node   0: [mem 0x000000007deff000-0x000000008618afff]
  node   0: [mem 0x000000008644f000-0x0000000086656fff]
  node   0: [mem 0x00000000873ff000-0x00000000873fffff]
  node   0: [mem 0x0000000100000000-0x000000026dffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000026dffffff]
On node 0 totalpages: 2048790
  DMA zone: 64 pages used for memmap
  DMA zone: 25 pages reserved
  DMA zone: 3997 pages, LIFO batch:0
  DMA32 zone: 8526 pages used for memmap
  DMA32 zone: 545657 pages, LIFO batch:31
  Normal zone: 23424 pages used for memmap
  Normal zone: 1499136 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0x88000000-0x8fffffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
e820: [mem 0x90000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
percpu: Embedded 32 pages/cpu @ffff88026dc00000 s91928 r8192 d30952 u1048576
pcpu-alloc: s91928 r8192 d30952 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2016751
Policy zone: Normal
DMAR: Disable GFX device mapping
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 7846044K/8195160K available (10010K kernel code, 1423K rwdata, 3976K rodata, 1084K init, 776K bss, 349116K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
	CONFIG_RCU_FANOUT set to non-default value of 32
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS:16640 nr_irqs:512 16
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-1.
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
console [ttyS0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 3311.949 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6623.89 BogoMIPS (lpj=3311949)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160108
ACPI: 8 ACPI AML tables successfully acquired and loaded

Security Framework initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 8 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Applying alternatives
Applying alternatives done
Applying alternatives smp done
Freeing SMP alternatives memory: 36K (ffffffffa2074000 - ffffffffa207d000)
smpboot: Max logical packages: 1
smpboot: APIC(0) Converting physical 0 to logical package 0
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Pentium(R) CPU G4400 @ 3.30GHz (family: 0x6, model: 0x5e, stepping: 0x3)
calling  trace_init_flags_sys_exit+0x0/0xf @ 1
initcall trace_init_flags_sys_exit+0x0/0xf returned 0 after 0 usecs
calling  trace_init_flags_sys_enter+0x0/0xf @ 1
initcall trace_init_flags_sys_enter+0x0/0xf returned 0 after 0 usecs
calling  init_hw_perf_events+0x0/0x4fb @ 1
Performance Events: PEBS fmt3+, 32-deep LBR, Skylake events, full-width counters, Intel PMU driver.
... version:                4
... bit width:              48
... generic registers:      8
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             00000007000000ff
initcall init_hw_perf_events+0x0/0x4fb returned 0 after 33 usecs
calling  set_real_mode_permissions+0x0/0x99 @ 1
initcall set_real_mode_permissions+0x0/0x99 returned 0 after 2 usecs
calling  trace_init_perf_perm_irq_work_exit+0x0/0x13 @ 1
initcall trace_init_perf_perm_irq_work_exit+0x0/0x13 returned 0 after 0 usecs
calling  register_trigger_all_cpu_backtrace+0x0/0x16 @ 1
initcall register_trigger_all_cpu_backtrace+0x0/0x16 returned 0 after 0 usecs
calling  early_efi_map_fb+0x0/0x38 @ 1
initcall early_efi_map_fb+0x0/0x38 returned 0 after 0 usecs
calling  spawn_ksoftirqd+0x0/0x2d @ 1
initcall spawn_ksoftirqd+0x0/0x2d returned 0 after 9 usecs
calling  init_workqueues+0x0/0x519 @ 1
initcall init_workqueues+0x0/0x519 returned 0 after 25 usecs
calling  migration_init+0x0/0x69 @ 1
initcall migration_init+0x0/0x69 returned 0 after 0 usecs
calling  check_cpu_stall_init+0x0/0x1b @ 1
initcall check_cpu_stall_init+0x0/0x1b returned 0 after 0 usecs
calling  rcu_register_oom_notifier+0x0/0x14 @ 1
initcall rcu_register_oom_notifier+0x0/0x14 returned 0 after 0 usecs
calling  rcu_spawn_gp_kthread+0x0/0x136 @ 1
initcall rcu_spawn_gp_kthread+0x0/0x136 returned 0 after 14 usecs
calling  cpu_stop_init+0x0/0x9e @ 1
initcall cpu_stop_init+0x0/0x9e returned 0 after 5 usecs
calling  relay_init+0x0/0x14 @ 1
initcall relay_init+0x0/0x14 returned 0 after 0 usecs
calling  init_events+0x0/0x68 @ 1
initcall init_events+0x0/0x68 returned 0 after 3 usecs
calling  init_trace_printk+0x0/0x12 @ 1
initcall init_trace_printk+0x0/0x12 returned 0 after 0 usecs
calling  event_trace_enable_again+0x0/0x57 @ 1
initcall event_trace_enable_again+0x0/0x57 returned 0 after 0 usecs
calling  dynamic_debug_init+0x0/0x26b @ 1
initcall dynamic_debug_init+0x0/0x26b returned 0 after 263 usecs
calling  rand_initialize+0x0/0x30 @ 1
initcall rand_initialize+0x0/0x30 returned 0 after 26 usecs
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
Skipped synchronization checks as TSC is reliable.
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (13247.79 BogoMIPS)
devtmpfs: initialized
calling  ipc_ns_init+0x0/0x48 @ 1
initcall ipc_ns_init+0x0/0x48 returned 0 after 0 usecs
calling  init_mmap_min_addr+0x0/0x16 @ 1
initcall init_mmap_min_addr+0x0/0x16 returned 0 after 0 usecs
calling  init_cpufreq_transition_notifier_list+0x0/0x1b @ 1
initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 usecs
calling  net_ns_init+0x0/0x134 @ 1
initcall net_ns_init+0x0/0x134 returned 0 after 14 usecs
calling  e820_mark_nvs_memory+0x0/0x3e @ 1
initcall e820_mark_nvs_memory+0x0/0x3e returned 0 after 0 usecs
calling  cpufreq_tsc+0x0/0x32 @ 1
initcall cpufreq_tsc+0x0/0x32 returned 0 after 0 usecs
calling  init_cpu_syscore+0x0/0x14 @ 1
initcall init_cpu_syscore+0x0/0x14 returned 0 after 0 usecs
calling  reboot_init+0x0/0x37 @ 1
initcall reboot_init+0x0/0x37 returned 0 after 1 usecs
calling  init_lapic_sysfs+0x0/0x24 @ 1
initcall init_lapic_sysfs+0x0/0x24 returned 0 after 0 usecs
calling  wq_sysfs_init+0x0/0x2b @ 1
initcall wq_sysfs_init+0x0/0x2b returned 0 after 7 usecs
calling  ksysfs_init+0x0/0x97 @ 1
initcall ksysfs_init+0x0/0x97 returned 0 after 2 usecs
calling  pm_init+0x0/0x5a @ 1
initcall pm_init+0x0/0x5a returned 0 after 4 usecs
calling  init_jiffies_clocksource+0x0/0x19 @ 1
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
initcall init_jiffies_clocksource+0x0/0x19 returned 0 after 1 usecs
calling  cgroup_wq_init+0x0/0x54 @ 1
initcall cgroup_wq_init+0x0/0x54 returned 0 after 1 usecs
calling  init_wakeup_tracer+0x0/0x32 @ 1
initcall init_wakeup_tracer+0x0/0x32 returned 0 after 0 usecs
calling  init_per_zone_wmark_min+0x0/0x9f @ 1
initcall init_per_zone_wmark_min+0x0/0x9f returned 0 after 1 usecs
calling  init_zero_pfn+0x0/0x34 @ 1
initcall init_zero_pfn+0x0/0x34 returned 0 after 0 usecs
calling  fsnotify_init+0x0/0x24 @ 1
initcall fsnotify_init+0x0/0x24 returned 0 after 0 usecs
calling  filelock_init+0x0/0x9f @ 1
initcall filelock_init+0x0/0x9f returned 0 after 1 usecs
calling  init_misc_binfmt+0x0/0x2d @ 1
initcall init_misc_binfmt+0x0/0x2d returned 0 after 0 usecs
calling  init_script_binfmt+0x0/0x16 @ 1
initcall init_script_binfmt+0x0/0x16 returned 0 after 0 usecs
calling  init_elf_binfmt+0x0/0x16 @ 1
initcall init_elf_binfmt+0x0/0x16 returned 0 after 0 usecs
calling  init_compat_elf_binfmt+0x0/0x16 @ 1
initcall init_compat_elf_binfmt+0x0/0x16 returned 0 after 0 usecs
calling  debugfs_init+0x0/0x50 @ 1
initcall debugfs_init+0x0/0x50 returned 0 after 0 usecs
calling  tracefs_init+0x0/0x3b @ 1
initcall tracefs_init+0x0/0x3b returned 0 after 0 usecs
calling  securityfs_init+0x0/0x47 @ 1
initcall securityfs_init+0x0/0x47 returned 0 after 0 usecs
calling  calibrate_xor_blocks+0x0/0x12c @ 1
xor: measuring software checksum speed
   prefetch64-sse: 23776.000 MB/sec
   generic_sse: 22120.000 MB/sec
xor: using function: prefetch64-sse (23776.000 MB/sec)
initcall calibrate_xor_blocks+0x0/0x12c returned 0 after 19064 usecs
calling  prandom_init+0x0/0xcc @ 1
initcall prandom_init+0x0/0xcc returned 0 after 1 usecs
calling  pinctrl_init+0x0/0xae @ 1
pinctrl core: initialized pinctrl subsystem
initcall pinctrl_init+0x0/0xae returned 0 after 6 usecs
calling  virtio_init+0x0/0x30 @ 1
initcall virtio_init+0x0/0x30 returned 0 after 4 usecs
calling  iommu_init+0x0/0x56 @ 1
initcall iommu_init+0x0/0x56 returned 0 after 0 usecs
calling  cpufreq_core_init+0x0/0x4c @ 1
initcall cpufreq_core_init+0x0/0x4c returned 0 after 0 usecs
calling  cpuidle_init+0x0/0x3b @ 1
initcall cpuidle_init+0x0/0x3b returned 0 after 1 usecs
calling  sock_init+0x0/0x8f @ 1
initcall sock_init+0x0/0x8f returned 0 after 27 usecs
calling  net_inuse_init+0x0/0x24 @ 1
initcall net_inuse_init+0x0/0x24 returned 0 after 0 usecs
calling  netpoll_init+0x0/0x31 @ 1
initcall netpoll_init+0x0/0x31 returned 0 after 0 usecs
calling  netlink_proto_init+0x0/0x167 @ 1
NET: Registered protocol family 16
initcall netlink_proto_init+0x0/0x167 returned 0 after 36 usecs
calling  bdi_class_init+0x0/0x49 @ 1
initcall bdi_class_init+0x0/0x49 returned 0 after 2 usecs
calling  mm_sysfs_init+0x0/0x29 @ 1
initcall mm_sysfs_init+0x0/0x29 returned 0 after 0 usecs
calling  kobject_uevent_init+0x0/0x12 @ 1
initcall kobject_uevent_init+0x0/0x12 returned 0 after 0 usecs
calling  pcibus_class_init+0x0/0x19 @ 1
initcall pcibus_class_init+0x0/0x19 returned 0 after 1 usecs
calling  pci_driver_init+0x0/0x12 @ 1
initcall pci_driver_init+0x0/0x12 returned 0 after 3 usecs
calling  backlight_class_init+0x0/0xa7 @ 1
initcall backlight_class_init+0x0/0xa7 returned 0 after 1 usecs
calling  tty_class_init+0x0/0x34 @ 1
initcall tty_class_init+0x0/0x34 returned 0 after 1 usecs
calling  vtconsole_class_init+0x0/0xde @ 1
initcall vtconsole_class_init+0x0/0xde returned 0 after 9 usecs
calling  iommu_dev_init+0x0/0x19 @ 1
initcall iommu_dev_init+0x0/0x19 returned 0 after 1 usecs
calling  register_node_type+0x0/0x19 @ 1
initcall register_node_type+0x0/0x19 returned 0 after 8 usecs
calling  regmap_initcall+0x0/0xd @ 1
initcall regmap_initcall+0x0/0xd returned 0 after 0 usecs
calling  mipi_dsi_bus_init+0x0/0x12 @ 1
initcall mipi_dsi_bus_init+0x0/0x12 returned 0 after 2 usecs
calling  spi_init+0x0/0x83 @ 1
initcall spi_init+0x0/0x83 returned 0 after 3 usecs
calling  i2c_init+0x0/0x74 @ 1
initcall i2c_init+0x0/0x74 returned 0 after 5 usecs
calling  init_ladder+0x0/0x25 @ 1
cpuidle: using governor ladder
initcall init_ladder+0x0/0x25 returned 0 after 1 usecs
calling  init_menu+0x0/0x12 @ 1
cpuidle: using governor menu
initcall init_menu+0x0/0x12 returned 0 after 0 usecs
calling  bts_init+0x0/0xaa @ 1
initcall bts_init+0x0/0xaa returned 0 after 0 usecs
calling  pt_init+0x0/0x295 @ 1
initcall pt_init+0x0/0x295 returned 0 after 1 usecs
calling  boot_params_ksysfs_init+0x0/0x231 @ 1
initcall boot_params_ksysfs_init+0x0/0x231 returned 0 after 11 usecs
calling  sbf_init+0x0/0x103 @ 1
initcall sbf_init+0x0/0x103 returned 0 after 0 usecs
calling  arch_kdebugfs_init+0x0/0x200 @ 1
initcall arch_kdebugfs_init+0x0/0x200 returned 0 after 6 usecs
calling  mtrr_if_init+0x0/0x61 @ 1
initcall mtrr_if_init+0x0/0x61 returned 0 after 0 usecs
calling  ffh_cstate_init+0x0/0x2b @ 1
initcall ffh_cstate_init+0x0/0x2b returned 0 after 0 usecs
calling  activate_jump_labels+0x0/0x7b @ 1
initcall activate_jump_labels+0x0/0x7b returned 0 after 0 usecs
calling  kcmp_cookies_init+0x0/0x36 @ 1
initcall kcmp_cookies_init+0x0/0x36 returned 0 after 8 usecs
calling  acpi_pci_init+0x0/0x58 @ 1
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
initcall acpi_pci_init+0x0/0x58 returned 0 after 1 usecs
calling  dma_bus_init+0x0/0xd6 @ 1
initcall dma_bus_init+0x0/0xd6 returned 0 after 5 usecs
calling  dma_channel_table_init+0x0/0xd7 @ 1
initcall dma_channel_table_init+0x0/0xd7 returned 0 after 2 usecs
calling  dmi_id_init+0x0/0x2fd @ 1
initcall dmi_id_init+0x0/0x2fd returned 0 after 15 usecs
calling  dca_init+0x0/0x1e @ 1
dca service started, version 1.12.1
initcall dca_init+0x0/0x1e returned 0 after 1 usecs
calling  pci_arch_init+0x0/0x66 @ 1
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
initcall pci_arch_init+0x0/0x66 returned 0 after 20 usecs
calling  init_vdso+0x0/0x3d @ 1
initcall init_vdso+0x0/0x3d returned 0 after 2 usecs
calling  sysenter_setup+0x0/0x14 @ 1
initcall sysenter_setup+0x0/0x14 returned 0 after 1 usecs
calling  fixup_ht_bug+0x0/0xc0 @ 1
initcall fixup_ht_bug+0x0/0xc0 returned 0 after 0 usecs
calling  topology_init+0x0/0x8e @ 1
initcall topology_init+0x0/0x8e returned 0 after 36 usecs
calling  mtrr_init_finialize+0x0/0x42 @ 1
initcall mtrr_init_finialize+0x0/0x42 returned 0 after 0 usecs
calling  uid_cache_init+0x0/0x95 @ 1
initcall uid_cache_init+0x0/0x95 returned 0 after 0 usecs
calling  param_sysfs_init+0x0/0x1b6 @ 1
initcall param_sysfs_init+0x0/0x1b6 returned 0 after 975 usecs
calling  proc_schedstat_init+0x0/0x22 @ 1
initcall proc_schedstat_init+0x0/0x22 returned 0 after 0 usecs
calling  pm_sysrq_init+0x0/0x19 @ 1
initcall pm_sysrq_init+0x0/0x19 returned 0 after 0 usecs
calling  create_proc_profile+0x0/0x2b0 @ 1
initcall create_proc_profile+0x0/0x2b0 returned 0 after 0 usecs
calling  cgroup_namespaces_init+0x0/0x8 @ 1
initcall cgroup_namespaces_init+0x0/0x8 returned 0 after 0 usecs
calling  user_namespaces_init+0x0/0x2d @ 1
initcall user_namespaces_init+0x0/0x2d returned 0 after 0 usecs
calling  oom_init+0x0/0x5f @ 1
initcall oom_init+0x0/0x5f returned 0 after 7 usecs
calling  default_bdi_init+0x0/0x3e @ 1
initcall default_bdi_init+0x0/0x3e returned 0 after 18 usecs
calling  percpu_enable_async+0x0/0xf @ 1
initcall percpu_enable_async+0x0/0xf returned 0 after 0 usecs
calling  kcompactd_init+0x0/0x6a @ 1
initcall kcompactd_init+0x0/0x6a returned 0 after 8 usecs
calling  init_reserve_notifier+0x0/0x8 @ 1
initcall init_reserve_notifier+0x0/0x8 returned 0 after 0 usecs
calling  init_admin_reserve+0x0/0x40 @ 1
initcall init_admin_reserve+0x0/0x40 returned 0 after 0 usecs
calling  init_user_reserve+0x0/0x40 @ 1
initcall init_user_reserve+0x0/0x40 returned 0 after 0 usecs
calling  hugetlb_init+0x0/0x1b @ 1
HugeTLB registered 2 MB page size, pre-allocated 0 pages
initcall hugetlb_init+0x0/0x1b returned 0 after 8 usecs
calling  mmu_notifier_init+0x0/0x12 @ 1
initcall mmu_notifier_init+0x0/0x12 returned 0 after 0 usecs
calling  ksm_init+0x0/0x148 @ 1
initcall ksm_init+0x0/0x148 returned 0 after 10 usecs
calling  hugepage_init+0x0/0x17f @ 1
initcall hugepage_init+0x0/0x17f returned 0 after 12 usecs
calling  mem_cgroup_swap_init+0x0/0x78 @ 1
initcall mem_cgroup_swap_init+0x0/0x78 returned 0 after 0 usecs
calling  mem_cgroup_init+0x0/0x14c @ 1
initcall mem_cgroup_init+0x0/0x14c returned 0 after 0 usecs
calling  crypto_wq_init+0x0/0x31 @ 1
initcall crypto_wq_init+0x0/0x31 returned 0 after 7 usecs
calling  cryptomgr_init+0x0/0x12 @ 1
initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs
calling  cryptd_init+0x0/0xba @ 1
initcall cryptd_init+0x0/0xba returned 0 after 0 usecs
calling  init_bio+0x0/0xd5 @ 1
initcall init_bio+0x0/0xd5 returned 0 after 15 usecs
calling  blk_settings_init+0x0/0x2a @ 1
initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs
calling  blk_ioc_init+0x0/0x2a @ 1
initcall blk_ioc_init+0x0/0x2a returned 0 after 1 usecs
calling  blk_softirq_init+0x0/0x6a @ 1
initcall blk_softirq_init+0x0/0x6a returned 0 after 0 usecs
calling  blk_mq_init+0x0/0x19 @ 1
initcall blk_mq_init+0x0/0x19 returned 0 after 0 usecs
calling  genhd_device_init+0x0/0x76 @ 1
initcall genhd_device_init+0x0/0x76 returned 0 after 11 usecs
calling  raid6_select_algo+0x0/0x8f @ 1
raid6: Forced to use recovery algorithm intx1
raid6: Forced gen() algo avx2x4
initcall raid6_select_algo+0x0/0x8f returned 0 after 1 usecs
calling  irq_poll_setup+0x0/0x6a @ 1
initcall irq_poll_setup+0x0/0x6a returned 0 after 0 usecs
calling  pwm_debugfs_init+0x0/0x24 @ 1
initcall pwm_debugfs_init+0x0/0x24 returned 0 after 1 usecs
calling  pwm_sysfs_init+0x0/0x19 @ 1
initcall pwm_sysfs_init+0x0/0x19 returned 0 after 1 usecs
calling  pci_slot_init+0x0/0x50 @ 1
initcall pci_slot_init+0x0/0x50 returned 0 after 0 usecs
calling  fbmem_init+0x0/0x94 @ 1
initcall fbmem_init+0x0/0x94 returned 0 after 2 usecs
calling  acpi_init+0x0/0x270 @ 1
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 26 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880264752000 0006A2 (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880264726C00 00037F (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880264752800 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802647BAC00 000119 (v02 PmRef  ApCst    00003000 INTL 20120913)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PME]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:190f] type 00 class 0x060000
pci 0000:00:02.0: [8086:1902] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
pci 0000:00:08.0: reg 0x10: [mem 0xdf132000-0xdf132fff 64bit]
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdf110000-0xdf11ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xdf131000-0xdf131fff 64bit]
pci 0000:00:15.0: [8086:a160] type 00 class 0x118000
pci 0000:00:15.0: reg 0x10: [mem 0xdf130000-0xdf130fff 64bit]
pci 0000:00:15.1: [8086:a161] type 00 class 0x118000
pci 0000:00:15.1: reg 0x10: [mem 0xdf12f000-0xdf12ffff 64bit]
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdf12e000-0xdf12efff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xdf128000-0xdf129fff]
pci 0000:00:17.0: reg 0x14: [mem 0xdf12d000-0xdf12d0ff]
pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
pci 0000:00:17.0: reg 0x24: [mem 0xdf12c000-0xdf12c7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.1: [8086:a119] type 01 class 0x060400
pci 0000:00:1d.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:a127] type 00 class 0x118000
pci 0000:00:1e.0: reg 0x10: [mem 0xdf12b000-0xdf12bfff 64bit]
pci 0000:00:1f.0: [8086:a148] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdf124000-0xdf127fff]
pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xdf120000-0xdf123fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdf100000-0xdf10ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdf12a000-0xdf12a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
pci 0000:00:1d.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xdf004000-0xdf004fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xdf000000-0xdf003fff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1d.1: PCI bridge to [bus 02]
pci 0000:00:1d.1:   bridge window [io  0xe000-0xefff]
pci 0000:00:1d.1:   bridge window [mem 0xdf000000-0xdf0fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 5 GPEs in block 00 to 7F
initcall acpi_init+0x0/0x270 returned 0 after 33479 usecs
calling  pnp_init+0x0/0x12 @ 1
initcall pnp_init+0x0/0x12 returned 0 after 3 usecs
calling  misc_init+0x0/0xbc @ 1
initcall misc_init+0x0/0xbc returned 0 after 2 usecs
calling  cn_init+0x0/0xb0 @ 1
initcall cn_init+0x0/0xb0 returned 0 after 2 usecs
calling  dma_buf_init+0x0/0xab @ 1
initcall dma_buf_init+0x0/0xab returned 0 after 1 usecs
calling  init_scsi+0x0/0x78 @ 1
SCSI subsystem initialized
initcall init_scsi+0x0/0x78 returned 0 after 24 usecs
calling  ata_init+0x0/0x315 @ 1
libata version 3.00 loaded.
initcall ata_init+0x0/0x315 returned 0 after 21 usecs
calling  vga_arb_device_init+0x0/0x1b7 @ 1
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
initcall vga_arb_device_init+0x0/0x1b7 returned 0 after 26 usecs
calling  usb_init+0x0/0x162 @ 1
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
initcall usb_init+0x0/0x162 returned 0 after 21 usecs
calling  serio_init+0x0/0x2a @ 1
initcall serio_init+0x0/0x2a returned 0 after 3 usecs
calling  input_init+0x0/0x101 @ 1
initcall input_init+0x0/0x101 returned 0 after 2 usecs
calling  rtc_init+0x0/0x4d @ 1
initcall rtc_init+0x0/0x4d returned 0 after 1 usecs
calling  pps_init+0x0/0xaa @ 1
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
initcall pps_init+0x0/0xaa returned 0 after 2 usecs
calling  ptp_init+0x0/0x99 @ 1
PTP clock support registered
initcall ptp_init+0x0/0x99 returned 0 after 1 usecs
calling  hwmon_init+0x0/0xd9 @ 1
initcall hwmon_init+0x0/0xd9 returned 0 after 1 usecs
calling  md_init+0x0/0x166 @ 1
initcall md_init+0x0/0x166 returned 0 after 11 usecs
calling  mmc_init+0x0/0x35 @ 1
initcall mmc_init+0x0/0x35 returned 0 after 6 usecs
calling  dmi_init+0x0/0x111 @ 1
initcall dmi_init+0x0/0x111 returned 0 after 3 usecs
calling  efisubsys_init+0x0/0x12d @ 1
initcall efisubsys_init+0x0/0x12d returned 0 after 2 usecs
calling  hv_acpi_init+0x0/0x184 @ 1
initcall hv_acpi_init+0x0/0x184 returned -19 after 0 usecs
calling  devfreq_init+0x0/0xa3 @ 1
initcall devfreq_init+0x0/0xa3 returned 0 after 9 usecs
calling  devfreq_performance_init+0x0/0x12 @ 1
initcall devfreq_performance_init+0x0/0x12 returned 0 after 0 usecs
calling  pci_subsys_init+0x0/0x48 @ 1
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x7c581018-0x7fffffff]
e820: reserve RAM buffer [mem 0x7c58f018-0x7fffffff]
e820: reserve RAM buffer [mem 0x7dee4000-0x7fffffff]
e820: reserve RAM buffer [mem 0x8618b000-0x87ffffff]
e820: reserve RAM buffer [mem 0x86657000-0x87ffffff]
e820: reserve RAM buffer [mem 0x87400000-0x87ffffff]
e820: reserve RAM buffer [mem 0x26e000000-0x26fffffff]
initcall pci_subsys_init+0x0/0x48 returned 0 after 27555 usecs
calling  proto_init+0x0/0x12 @ 1
initcall proto_init+0x0/0x12 returned 0 after 2 usecs
calling  net_dev_init+0x0/0x1c3 @ 1
initcall net_dev_init+0x0/0x1c3 returned 0 after 47 usecs
calling  neigh_init+0x0/0x80 @ 1
initcall neigh_init+0x0/0x80 returned 0 after 0 usecs
calling  fib_rules_init+0x0/0xac @ 1
initcall fib_rules_init+0x0/0xac returned 0 after 0 usecs
calling  init_cgroup_netprio+0x0/0x14 @ 1
initcall init_cgroup_netprio+0x0/0x14 returned 0 after 0 usecs
calling  pktsched_init+0x0/0x10f @ 1
initcall pktsched_init+0x0/0x10f returned 0 after 1 usecs
calling  tc_filter_init+0x0/0x55 @ 1
initcall tc_filter_init+0x0/0x55 returned 0 after 0 usecs
calling  genl_init+0x0/0x89 @ 1
initcall genl_init+0x0/0x89 returned 0 after 1 usecs
calling  ipv4_netfilter_init+0x0/0x12 @ 1
initcall ipv4_netfilter_init+0x0/0x12 returned 0 after 0 usecs
calling  cipso_v4_init+0x0/0x5e @ 1
initcall cipso_v4_init+0x0/0x5e returned 0 after 0 usecs
calling  netlbl_init+0x0/0x79 @ 1
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
initcall netlbl_init+0x0/0x79 returned 0 after 8 usecs
calling  nmi_warning_debugfs+0x0/0x27 @ 1
initcall nmi_warning_debugfs+0x0/0x27 returned 0 after 1 usecs
calling  hpet_late_init+0x0/0x101 @ 1
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
initcall hpet_late_init+0x0/0x101 returned 0 after 2022 usecs
calling  clocksource_done_booting+0x0/0x42 @ 1
clocksource: Switched to clocksource hpet
initcall clocksource_done_booting+0x0/0x42 returned 0 after 8 usecs
calling  tracer_init_tracefs+0x0/0x183 @ 1
initcall tracer_init_tracefs+0x0/0x183 returned 0 after 398 usecs
calling  init_trace_printk_function_export+0x0/0x32 @ 1
initcall init_trace_printk_function_export+0x0/0x32 returned 0 after 0 usecs
calling  event_trace_init+0x0/0x2f3 @ 1
initcall event_trace_init+0x0/0x2f3 returned 0 after 4351 usecs
calling  bpf_init+0x0/0x47 @ 1
initcall bpf_init+0x0/0x47 returned 0 after 2 usecs
calling  init_pipe_fs+0x0/0x47 @ 1
initcall init_pipe_fs+0x0/0x47 returned 0 after 4 usecs
calling  cgroup_writeback_init+0x0/0x2b @ 1
initcall cgroup_writeback_init+0x0/0x2b returned 0 after 4 usecs
calling  inotify_user_setup+0x0/0x4b @ 1
initcall inotify_user_setup+0x0/0x4b returned 0 after 1 usecs
calling  eventpoll_init+0x0/0xdd @ 1
initcall eventpoll_init+0x0/0xdd returned 0 after 0 usecs
calling  anon_inode_init+0x0/0x5b @ 1
initcall anon_inode_init+0x0/0x5b returned 0 after 2 usecs
calling  proc_locks_init+0x0/0x22 @ 1
initcall proc_locks_init+0x0/0x22 returned 0 after 0 usecs
calling  proc_cmdline_init+0x0/0x22 @ 1
initcall proc_cmdline_init+0x0/0x22 returned 0 after 0 usecs
calling  proc_consoles_init+0x0/0x22 @ 1
initcall proc_consoles_init+0x0/0x22 returned 0 after 0 usecs
calling  proc_cpuinfo_init+0x0/0x22 @ 1
initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 0 usecs
calling  proc_devices_init+0x0/0x22 @ 1
initcall proc_devices_init+0x0/0x22 returned 0 after 0 usecs
calling  proc_interrupts_init+0x0/0x22 @ 1
initcall proc_interrupts_init+0x0/0x22 returned 0 after 0 usecs
calling  proc_loadavg_init+0x0/0x22 @ 1
initcall proc_loadavg_init+0x0/0x22 returned 0 after 0 usecs
calling  proc_meminfo_init+0x0/0x22 @ 1
initcall proc_meminfo_init+0x0/0x22 returned 0 after 0 usecs
calling  proc_stat_init+0x0/0x22 @ 1
initcall proc_stat_init+0x0/0x22 returned 0 after 0 usecs
calling  proc_uptime_init+0x0/0x22 @ 1
initcall proc_uptime_init+0x0/0x22 returned 0 after 0 usecs
calling  proc_version_init+0x0/0x22 @ 1
initcall proc_version_init+0x0/0x22 returned 0 after 0 usecs
calling  proc_softirqs_init+0x0/0x22 @ 1
initcall proc_softirqs_init+0x0/0x22 returned 0 after 0 usecs
calling  proc_kmsg_init+0x0/0x25 @ 1
initcall proc_kmsg_init+0x0/0x25 returned 0 after 0 usecs
calling  proc_page_init+0x0/0x5f @ 1
initcall proc_page_init+0x0/0x5f returned 0 after 1 usecs
calling  init_ramfs_fs+0x0/0x20 @ 1
initcall init_ramfs_fs+0x0/0x20 returned 0 after 0 usecs
calling  init_hugetlbfs_fs+0x0/0x155 @ 1
initcall init_hugetlbfs_fs+0x0/0x155 returned 0 after 6 usecs
calling  blk_scsi_ioctl_init+0x0/0x36a @ 1
initcall blk_scsi_ioctl_init+0x0/0x36a returned 0 after 0 usecs
calling  dynamic_debug_init_debugfs+0x0/0x67 @ 1
initcall dynamic_debug_init_debugfs+0x0/0x67 returned 0 after 1 usecs
calling  fb_console_init+0x0/0xfc @ 1
initcall fb_console_init+0x0/0xfc returned 0 after 10 usecs
calling  acpi_event_init+0x0/0x3b @ 1
initcall acpi_event_init+0x0/0x3b returned 0 after 2 usecs
calling  pnp_system_init+0x0/0x12 @ 1
initcall pnp_system_init+0x0/0x12 returned 0 after 2 usecs
calling  pnpacpi_init+0x0/0x6e @ 1
pnp: PnP ACPI init
system 00:00: [io  0x0a00-0x0a0f] has been reserved
system 00:00: [io  0x0a10-0x0a1f] has been reserved
system 00:00: [io  0x0a20-0x0a2f] has been reserved
system 00:00: [io  0x0a30-0x0a3f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
system 00:03: [io  0x0680-0x069f] has been reserved
system 00:03: [io  0xffff] has been reserved
system 00:03: [io  0xffff] has been reserved
system 00:03: [io  0xffff] has been reserved
system 00:03: [io  0x1800-0x18fe] could not be reserved
system 00:03: [io  0x164e-0x164f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io  0x0800-0x087f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io  0x1854-0x1857] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xdffc0000-0xdffdffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [io  0xff00-0xfffe] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
initcall pnpacpi_init+0x0/0x6e returned 0 after 2009 usecs
calling  chr_dev_init+0x0/0xaa @ 1
initcall chr_dev_init+0x0/0xaa returned 0 after 3320 usecs
calling  firmware_class_init+0x0/0x31 @ 1
initcall firmware_class_init+0x0/0x31 returned 0 after 0 usecs
calling  thermal_init+0x0/0x94 @ 1
initcall thermal_init+0x0/0x94 returned 0 after 4 usecs
calling  cpufreq_gov_performance_init+0x0/0x12 @ 1
initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 0 usecs
calling  init_acpi_pm_clocksource+0x0/0xd6 @ 1
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
initcall init_acpi_pm_clocksource+0x0/0xd6 returned 0 after 4414 usecs
calling  pcibios_assign_resources+0x0/0xc2 @ 1
pci 0000:00:1d.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
pci 0000:00:1d.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1d.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1d.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1d.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1d.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1d.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1d.0: BAR 14: assigned [mem 0x90000000-0x901fffff]
pci 0000:00:1d.0: BAR 15: assigned [mem 0x90200000-0x903fffff 64bit pref]
pci 0000:00:1d.0: BAR 13: assigned [io  0x2000-0x2fff]
pci 0000:00:1d.0: PCI bridge to [bus 01]
pci 0000:00:1d.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1d.0:   bridge window [mem 0x90000000-0x901fffff]
pci 0000:00:1d.0:   bridge window [mem 0x90200000-0x903fffff 64bit pref]
pci 0000:00:1d.1: PCI bridge to [bus 02]
pci 0000:00:1d.1:   bridge window [io  0xe000-0xefff]
pci 0000:00:1d.1:   bridge window [mem 0xdf000000-0xdf0fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0x90000000-0x901fffff]
pci_bus 0000:01: resource 2 [mem 0x90200000-0x903fffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xdf000000-0xdf0fffff]
initcall pcibios_assign_resources+0x0/0xc2 returned 0 after 56 usecs
calling  sysctl_core_init+0x0/0x2c @ 1
initcall sysctl_core_init+0x0/0x2c returned 0 after 6 usecs
calling  eth_offload_init+0x0/0x14 @ 1
initcall eth_offload_init+0x0/0x14 returned 0 after 0 usecs
calling  inet_init+0x0/0x25e @ 1
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
initcall inet_init+0x0/0x25e returned 0 after 295 usecs
calling  ipv4_offload_init+0x0/0x5d @ 1
initcall ipv4_offload_init+0x0/0x5d returned 0 after 0 usecs
calling  af_unix_init+0x0/0x4e @ 1
NET: Registered protocol family 1
initcall af_unix_init+0x0/0x4e returned 0 after 3 usecs
calling  ipv6_offload_init+0x0/0x79 @ 1
initcall ipv6_offload_init+0x0/0x79 returned 0 after 0 usecs
calling  pci_apply_final_quirks+0x0/0x107 @ 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 0 bytes, default 64
initcall pci_apply_final_quirks+0x0/0x107 returned 0 after 366 usecs
calling  acpi_reserve_resources+0x0/0xeb @ 1
initcall acpi_reserve_resources+0x0/0xeb returned 0 after 0 usecs
calling  populate_rootfs+0x0/0xa6 @ 1
initcall populate_rootfs+0x0/0xa6 returned 0 after 20 usecs
calling  pci_iommu_init+0x0/0x3c @ 1
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x78581000-0x7c581000] (64MB) mapped at [ffff880078581000-ffff88007c580fff]
initcall pci_iommu_init+0x0/0x3c returned 0 after 2 usecs
calling  ir_dev_scope_init+0x0/0x33 @ 1
initcall ir_dev_scope_init+0x0/0x33 returned 0 after 0 usecs
calling  ia32_binfmt_init+0x0/0x14 @ 1
initcall ia32_binfmt_init+0x0/0x14 returned 0 after 1 usecs
calling  amd_ibs_init+0x0/0x180 @ 1
initcall amd_ibs_init+0x0/0x180 returned -19 after 0 usecs
calling  msr_init+0x0/0xc3 @ 1
initcall msr_init+0x0/0xc3 returned 0 after 1 usecs
calling  intel_cqm_init+0x0/0x3e1 @ 1
initcall intel_cqm_init+0x0/0x3e1 returned -19 after 0 usecs
calling  cstate_pmu_init+0x0/0x18b @ 1
initcall cstate_pmu_init+0x0/0x18b returned 0 after 4 usecs
calling  rapl_pmu_init+0x0/0x345 @ 1
initcall rapl_pmu_init+0x0/0x345 returned -19 after 0 usecs
calling  intel_uncore_init+0x0/0x26 @ 1
initcall intel_uncore_init+0x0/0x26 returned -19 after 3 usecs
calling  vmx_init+0x0/0x1e @ 1
initcall vmx_init+0x0/0x1e returned 0 after 196 usecs
calling  register_kernel_offset_dumper+0x0/0x1b @ 1
initcall register_kernel_offset_dumper+0x0/0x1b returned 0 after 0 usecs
calling  i8259A_init_ops+0x0/0x24 @ 1
initcall i8259A_init_ops+0x0/0x24 returned 0 after 0 usecs
calling  init_tsc_clocksource+0x0/0xb5 @ 1
initcall init_tsc_clocksource+0x0/0xb5 returned 0 after 0 usecs
calling  add_rtc_cmos+0x0/0xcc @ 1
initcall add_rtc_cmos+0x0/0xcc returned 0 after 0 usecs
calling  i8237A_init_ops+0x0/0x14 @ 1
initcall i8237A_init_ops+0x0/0x14 returned 0 after 0 usecs
calling  thermal_throttle_init_device+0x0/0x89 @ 1
initcall thermal_throttle_init_device+0x0/0x89 returned 0 after 3 usecs
calling  msr_init+0x0/0x14a @ 1
initcall msr_init+0x0/0x14a returned 0 after 97 usecs
calling  cpuid_init+0x0/0x14a @ 1
initcall cpuid_init+0x0/0x14a returned 0 after 86 usecs
calling  ioapic_init_ops+0x0/0x14 @ 1
initcall ioapic_init_ops+0x0/0x14 returned 0 after 0 usecs
calling  start_periodic_check_for_corruption+0x0/0x50 @ 1
initcall start_periodic_check_for_corruption+0x0/0x50 returned 0 after 0 usecs
calling  sysfb_init+0x0/0x74 @ 1
initcall sysfb_init+0x0/0x74 returned 0 after 10 usecs
calling  aes_init+0x0/0x12 @ 1
alg: self-tests disabled
initcall aes_init+0x0/0x12 returned 0 after 94 usecs
calling  init+0x0/0x45 @ 1
initcall init+0x0/0x45 returned 0 after 591 usecs
calling  crc32c_intel_mod_init+0x0/0x6a @ 1
initcall crc32c_intel_mod_init+0x0/0x6a returned 0 after 92 usecs
calling  sha256_ssse3_mod_init+0x0/0xe8 @ 1
initcall sha256_ssse3_mod_init+0x0/0xe8 returned 0 after 140 usecs
calling  sha512_ssse3_mod_init+0x0/0xad @ 1
initcall sha512_ssse3_mod_init+0x0/0xad returned 0 after 141 usecs
calling  camellia_aesni_init+0x0/0x7b @ 1
AVX or AES-NI instructions are not detected.
initcall camellia_aesni_init+0x0/0x7b returned -19 after 0 usecs
calling  serpent_init+0x0/0x41 @ 1
CPU feature 'AVX registers' is not supported.
initcall serpent_init+0x0/0x41 returned -19 after 0 usecs
calling  camellia_aesni_init+0x0/0x89 @ 1
AVX2 or AES-NI instructions are not detected.
initcall camellia_aesni_init+0x0/0x89 returned -19 after 0 usecs
calling  init+0x0/0x6f @ 1
AVX2 instructions are not detected.
initcall init+0x0/0x6f returned -19 after 0 usecs
calling  pmc_atom_init+0x0/0x1c6 @ 1
initcall pmc_atom_init+0x0/0x1c6 returned -19 after 1 usecs
calling  iosf_mbi_init+0x0/0x1b @ 1
initcall iosf_mbi_init+0x0/0x1b returned 0 after 7 usecs
calling  proc_execdomains_init+0x0/0x22 @ 1
initcall proc_execdomains_init+0x0/0x22 returned 0 after 1 usecs
calling  cpuhp_sysfs_init+0x0/0x7b @ 1
initcall cpuhp_sysfs_init+0x0/0x7b returned 0 after 3 usecs
calling  ioresources_init+0x0/0x3c @ 1
initcall ioresources_init+0x0/0x3c returned 0 after 0 usecs
calling  init_sched_debug_procfs+0x0/0x2c @ 1
initcall init_sched_debug_procfs+0x0/0x2c returned 0 after 0 usecs
calling  init_posix_timers+0x0/0x252 @ 1
initcall init_posix_timers+0x0/0x252 returned 0 after 1 usecs
calling  init_posix_cpu_timers+0x0/0x99 @ 1
initcall init_posix_cpu_timers+0x0/0x99 returned 0 after 0 usecs
calling  timekeeping_init_ops+0x0/0x14 @ 1
initcall timekeeping_init_ops+0x0/0x14 returned 0 after 0 usecs
calling  init_clocksource_sysfs+0x0/0x69 @ 1
initcall init_clocksource_sysfs+0x0/0x69 returned 0 after 15 usecs
calling  init_timer_list_procfs+0x0/0x2c @ 1
initcall init_timer_list_procfs+0x0/0x2c returned 0 after 0 usecs
calling  alarmtimer_init+0x0/0x17e @ 1
initcall alarmtimer_init+0x0/0x17e returned 0 after 13 usecs
calling  clockevents_init_sysfs+0x0/0xd1 @ 1
initcall clockevents_init_sysfs+0x0/0xd1 returned 0 after 23 usecs
calling  init_tstats_procfs+0x0/0x2c @ 1
initcall init_tstats_procfs+0x0/0x2c returned 0 after 0 usecs
calling  futex_init+0x0/0xd9 @ 1
futex hash table entries: 512 (order: 3, 32768 bytes)
initcall futex_init+0x0/0xd9 returned 0 after 7 usecs
calling  proc_dma_init+0x0/0x22 @ 1
initcall proc_dma_init+0x0/0x22 returned 0 after 0 usecs
calling  proc_modules_init+0x0/0x22 @ 1
initcall proc_modules_init+0x0/0x22 returned 0 after 0 usecs
calling  kallsyms_init+0x0/0x25 @ 1
initcall kallsyms_init+0x0/0x25 returned 0 after 0 usecs
calling  pid_namespaces_init+0x0/0x40 @ 1
initcall pid_namespaces_init+0x0/0x40 returned 0 after 2 usecs
calling  utsname_sysctl_init+0x0/0x14 @ 1
initcall utsname_sysctl_init+0x0/0x14 returned 0 after 2 usecs
calling  init_tracepoints+0x0/0x28 @ 1
initcall init_tracepoints+0x0/0x28 returned 0 after 0 usecs
calling  init_lstats_procfs+0x0/0x25 @ 1
initcall init_lstats_procfs+0x0/0x25 returned 0 after 0 usecs
calling  init_blk_tracer+0x0/0x56 @ 1
initcall init_blk_tracer+0x0/0x56 returned 0 after 3 usecs
calling  perf_event_sysfs_init+0x0/0x98 @ 1
initcall perf_event_sysfs_init+0x0/0x98 returned 0 after 79 usecs
calling  system_trusted_keyring_init+0x0/0x63 @ 1
Initialise system trusted keyring
initcall system_trusted_keyring_init+0x0/0x63 returned 0 after 2 usecs
calling  kswapd_init+0x0/0x6f @ 1
initcall kswapd_init+0x0/0x6f returned 0 after 45 usecs
calling  extfrag_debug_init+0x0/0x78 @ 1
initcall extfrag_debug_init+0x0/0x78 returned 0 after 1 usecs
calling  setup_vmstat+0x0/0x1b3 @ 1
initcall setup_vmstat+0x0/0x1b3 returned 0 after 48 usecs
calling  mm_compute_batch_init+0x0/0x56 @ 1
initcall mm_compute_batch_init+0x0/0x56 returned 0 after 0 usecs
calling  workingset_init+0x0/0x7c @ 1
workingset: timestamp_bits=42 max_order=21 bucket_order=0
initcall workingset_init+0x0/0x7c returned 0 after 1 usecs
calling  proc_vmalloc_init+0x0/0x25 @ 1
initcall proc_vmalloc_init+0x0/0x25 returned 0 after 0 usecs
calling  procswaps_init+0x0/0x22 @ 1
initcall procswaps_init+0x0/0x22 returned 0 after 0 usecs
calling  slab_sysfs_init+0x0/0xfc @ 1
initcall slab_sysfs_init+0x0/0xfc returned 0 after 695 usecs
calling  fcntl_init+0x0/0x2a @ 1
initcall fcntl_init+0x0/0x2a returned 0 after 1 usecs
calling  proc_filesystems_init+0x0/0x22 @ 1
initcall proc_filesystems_init+0x0/0x22 returned 0 after 0 usecs
calling  start_dirtytime_writeback+0x0/0x2a @ 1
initcall start_dirtytime_writeback+0x0/0x2a returned 0 after 0 usecs
calling  dio_init+0x0/0x2d @ 1
initcall dio_init+0x0/0x2d returned 0 after 10 usecs
calling  dnotify_init+0x0/0x79 @ 1
initcall dnotify_init+0x0/0x79 returned 0 after 1 usecs
calling  fanotify_user_setup+0x0/0x52 @ 1
initcall fanotify_user_setup+0x0/0x52 returned 0 after 1 usecs
calling  aio_setup+0x0/0xa3 @ 1
initcall aio_setup+0x0/0xa3 returned 0 after 5 usecs
calling  init_sys32_ioctl+0x0/0x28 @ 1
initcall init_sys32_ioctl+0x0/0x28 returned 0 after 45 usecs
calling  mbcache_init+0x0/0x31 @ 1
initcall mbcache_init+0x0/0x31 returned 0 after 9 usecs
calling  init_devpts_fs+0x0/0x64 @ 1
initcall init_devpts_fs+0x0/0x64 returned 0 after 6 usecs
calling  ext4_init_fs+0x0/0x171 @ 1
initcall ext4_init_fs+0x0/0x171 returned 0 after 42 usecs
calling  journal_init+0x0/0x107 @ 1
initcall journal_init+0x0/0x107 returned 0 after 45 usecs
calling  init_fat_fs+0x0/0x4a @ 1
initcall init_fat_fs+0x0/0x4a returned 0 after 16 usecs
calling  init_vfat_fs+0x0/0x12 @ 1
initcall init_vfat_fs+0x0/0x12 returned 0 after 0 usecs
calling  init_msdos_fs+0x0/0x12 @ 1
initcall init_msdos_fs+0x0/0x12 returned 0 after 0 usecs
calling  init_nls_cp437+0x0/0x14 @ 1
initcall init_nls_cp437+0x0/0x14 returned 0 after 0 usecs
calling  init_nls_ascii+0x0/0x14 @ 1
initcall init_nls_ascii+0x0/0x14 returned 0 after 0 usecs
calling  init_autofs4_fs+0x0/0x26 @ 1
initcall init_autofs4_fs+0x0/0x26 returned 0 after 43 usecs
calling  ovl_init+0x0/0x12 @ 1
initcall ovl_init+0x0/0x12 returned 0 after 0 usecs
calling  init_xfs_fs+0x0/0x187 @ 1
SGI XFS with ACLs, security attributes, realtime, no debug enabled
initcall init_xfs_fs+0x0/0x187 returned 0 after 213 usecs
calling  init_pstore_fs+0x0/0x47 @ 1
initcall init_pstore_fs+0x0/0x47 returned 0 after 0 usecs
calling  efivarfs_init+0x0/0x34 @ 1
initcall efivarfs_init+0x0/0x34 returned 0 after 0 usecs
calling  ipc_init+0x0/0x17 @ 1
initcall ipc_init+0x0/0x17 returned 0 after 1 usecs
calling  ipc_sysctl_init+0x0/0x14 @ 1
initcall ipc_sysctl_init+0x0/0x14 returned 0 after 3 usecs
calling  init_mqueue_fs+0x0/0x10a @ 1
initcall init_mqueue_fs+0x0/0x10a returned 0 after 15 usecs
calling  key_proc_init+0x0/0x5e @ 1
initcall key_proc_init+0x0/0x5e returned 0 after 1 usecs
calling  crypto_algapi_init+0x0/0xd @ 1
initcall crypto_algapi_init+0x0/0xd returned 0 after 0 usecs
calling  chainiv_module_init+0x0/0x12 @ 1
initcall chainiv_module_init+0x0/0x12 returned 0 after 0 usecs
calling  eseqiv_module_init+0x0/0x12 @ 1
initcall eseqiv_module_init+0x0/0x12 returned 0 after 0 usecs
calling  seqiv_module_init+0x0/0x12 @ 1
initcall seqiv_module_init+0x0/0x12 returned 0 after 0 usecs
calling  echainiv_module_init+0x0/0x12 @ 1
initcall echainiv_module_init+0x0/0x12 returned 0 after 0 usecs
calling  rsa_init+0x0/0x40 @ 1
initcall rsa_init+0x0/0x40 returned 0 after 93 usecs
calling  hmac_module_init+0x0/0x12 @ 1
initcall hmac_module_init+0x0/0x12 returned 0 after 0 usecs
calling  crypto_null_mod_init+0x0/0x48 @ 1
initcall crypto_null_mod_init+0x0/0x48 returned 0 after 383 usecs
calling  md5_mod_init+0x0/0x12 @ 1
initcall md5_mod_init+0x0/0x12 returned 0 after 92 usecs
calling  sha1_generic_mod_init+0x0/0x12 @ 1
initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 92 usecs
calling  sha256_generic_mod_init+0x0/0x17 @ 1
initcall sha256_generic_mod_init+0x0/0x17 returned 0 after 220 usecs
calling  sha512_generic_mod_init+0x0/0x17 @ 1
initcall sha512_generic_mod_init+0x0/0x17 returned 0 after 189 usecs
calling  crypto_ecb_module_init+0x0/0x12 @ 1
initcall crypto_ecb_module_init+0x0/0x12 returned 0 after 0 usecs
calling  crypto_cbc_module_init+0x0/0x12 @ 1
initcall crypto_cbc_module_init+0x0/0x12 returned 0 after 0 usecs
calling  crypto_module_init+0x0/0x12 @ 1
initcall crypto_module_init+0x0/0x12 returned 0 after 0 usecs
calling  crypto_module_init+0x0/0x12 @ 1
initcall crypto_module_init+0x0/0x12 returned 0 after 0 usecs
calling  crypto_ctr_module_init+0x0/0x39 @ 1
initcall crypto_ctr_module_init+0x0/0x39 returned 0 after 0 usecs
calling  crypto_ccm_module_init+0x0/0x58 @ 1
initcall crypto_ccm_module_init+0x0/0x58 returned 0 after 0 usecs
calling  serpent_mod_init+0x0/0x17 @ 1
initcall serpent_mod_init+0x0/0x17 returned 0 after 189 usecs
calling  aes_init+0x0/0x12 @ 1
initcall aes_init+0x0/0x12 returned 0 after 92 usecs
calling  arc4_init+0x0/0x17 @ 1
initcall arc4_init+0x0/0x17 returned 0 after 189 usecs
calling  deflate_mod_init+0x0/0x12 @ 1
initcall deflate_mod_init+0x0/0x12 returned 0 after 93 usecs
calling  crc32c_mod_init+0x0/0x12 @ 1
initcall crc32c_mod_init+0x0/0x12 returned 0 after 123 usecs
calling  crct10dif_mod_init+0x0/0x12 @ 1
initcall crct10dif_mod_init+0x0/0x12 returned 0 after 92 usecs
calling  drbg_init+0x0/0x1c6 @ 1
initcall drbg_init+0x0/0x1c6 returned 0 after 771 usecs
calling  jent_mod_init+0x0/0x30 @ 1
initcall jent_mod_init+0x0/0x30 returned 0 after 174 usecs
calling  af_alg_init+0x0/0x3b @ 1
NET: Registered protocol family 38
initcall af_alg_init+0x0/0x3b returned 0 after 0 usecs
calling  algif_hash_init+0x0/0x12 @ 1
initcall algif_hash_init+0x0/0x12 returned 0 after 0 usecs
calling  algif_skcipher_init+0x0/0x12 @ 1
initcall algif_skcipher_init+0x0/0x12 returned 0 after 0 usecs
calling  asymmetric_key_init+0x0/0x12 @ 1
Key type asymmetric registered
initcall asymmetric_key_init+0x0/0x12 returned 0 after 0 usecs
calling  x509_key_init+0x0/0x12 @ 1
Asymmetric key parser 'x509' registered
initcall x509_key_init+0x0/0x12 returned 0 after 0 usecs
calling  proc_genhd_init+0x0/0x3c @ 1
initcall proc_genhd_init+0x0/0x3c returned 0 after 1 usecs
calling  bsg_init+0x0/0x126 @ 1
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
initcall bsg_init+0x0/0x126 returned 0 after 14 usecs
calling  throtl_init+0x0/0x42 @ 1
initcall throtl_init+0x0/0x42 returned 0 after 38 usecs
calling  noop_init+0x0/0x12 @ 1
io scheduler noop registered
initcall noop_init+0x0/0x12 returned 0 after 0 usecs
calling  deadline_init+0x0/0x12 @ 1
io scheduler deadline registered
initcall deadline_init+0x0/0x12 returned 0 after 0 usecs
calling  cfq_init+0x0/0x84 @ 1
io scheduler cfq registered (default)
initcall cfq_init+0x0/0x84 returned 0 after 3 usecs
calling  crc_t10dif_mod_init+0x0/0x61 @ 1
initcall crc_t10dif_mod_init+0x0/0x61 returned 0 after 1 usecs
calling  libcrc32c_mod_init+0x0/0x2c @ 1
initcall libcrc32c_mod_init+0x0/0x2c returned 0 after 0 usecs
calling  percpu_counter_startup+0x0/0x38 @ 1
initcall percpu_counter_startup+0x0/0x38 returned 0 after 0 usecs
calling  pci_proc_init+0x0/0x6e @ 1
initcall pci_proc_init+0x0/0x6e returned 0 after 10 usecs
calling  pcie_portdrv_init+0x0/0x73 @ 1
initcall pcie_portdrv_init+0x0/0x73 returned 0 after 200 usecs
calling  pcie_pme_service_init+0x0/0x12 @ 1
initcall pcie_pme_service_init+0x0/0x12 returned 0 after 2 usecs
calling  pci_hotplug_init+0x0/0x1b @ 1
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
initcall pci_hotplug_init+0x0/0x1b returned 0 after 0 usecs
calling  pci_stub_init+0x0/0x12c @ 1
initcall pci_stub_init+0x0/0x12c returned 0 after 3 usecs
calling  efifb_driver_init+0x0/0x14 @ 1
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, mapped to 0xffffc90001000000, using 1876k, total 1875k
efifb: mode is 800x600x32, linelength=3200, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 100x37
fb0: EFI VGA frame buffer device
initcall efifb_driver_init+0x0/0x14 returned 0 after 1337 usecs
calling  intel_idle_init+0x0/0x4f7 @ 1
intel_idle: MWAIT substates: 0x142120
intel_idle: v0.4.1 model 0x5E
intel_idle: lapic_timer_reliable_states 0xffffffff
initcall intel_idle_init+0x0/0x4f7 returned 0 after 42 usecs
calling  acpi_button_driver_init+0x0/0x12 @ 1
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
initcall acpi_button_driver_init+0x0/0x12 returned 0 after 89 usecs
calling  acpi_fan_driver_init+0x0/0x14 @ 1
initcall acpi_fan_driver_init+0x0/0x14 returned 0 after 24485 usecs
calling  acpi_video_init+0x0/0x8a @ 1
initcall acpi_video_init+0x0/0x8a returned 0 after 2 usecs
calling  acpi_processor_driver_init+0x0/0x3e @ 1
initcall acpi_processor_driver_init+0x0/0x3e returned 0 after 23 usecs
calling  acpi_thermal_init+0x0/0x7d @ 1
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
initcall acpi_thermal_init+0x0/0x7d returned 0 after 24476 usecs
calling  acpi_ec_sys_init+0x0/0xfc @ 1
initcall acpi_ec_sys_init+0x0/0xfc returned -19 after 0 usecs
calling  acpi_pad_init+0x0/0xe2 @ 1
initcall acpi_pad_init+0x0/0xe2 returned 0 after 14 usecs
calling  erst_init+0x0/0x2f5 @ 1
initcall erst_init+0x0/0x2f5 returned 0 after 0 usecs
calling  ioat_init_module+0x0/0xb1 @ 1
ioatdma: Intel(R) QuickData Technology Driver 4.00
initcall ioat_init_module+0x0/0xb1 returned 0 after 10 usecs
calling  virtio_pci_driver_init+0x0/0x1b @ 1
initcall virtio_pci_driver_init+0x0/0x1b returned 0 after 4 usecs
calling  pty_init+0x0/0x210 @ 1
initcall pty_init+0x0/0x210 returned 0 after 147 usecs
calling  sysrq_init+0x0/0x6f @ 1
initcall sysrq_init+0x0/0x6f returned 0 after 1 usecs
calling  serial8250_init+0x0/0x16a @ 1
serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
initcall serial8250_init+0x0/0x16a returned 0 after 20894 usecs
calling  serial_pci_driver_init+0x0/0x1b @ 1
initcall serial_pci_driver_init+0x0/0x1b returned 0 after 9 usecs
calling  ttyprintk_init+0x0/0x102 @ 1
initcall ttyprintk_init+0x0/0x102 returned 0 after 162 usecs
calling  init+0x0/0xfd @ 1
initcall init+0x0/0xfd returned 0 after 9 usecs
calling  hpet_init+0x0/0x65 @ 1
initcall hpet_init+0x0/0x65 returned 0 after 134 usecs
calling  hwrng_modinit+0x0/0x12 @ 1
initcall hwrng_modinit+0x0/0x12 returned 0 after 72 usecs
calling  mod_init+0x0/0x1ed @ 1
initcall mod_init+0x0/0x1ed returned -19 after 13 usecs
calling  virtio_rng_driver_init+0x0/0x12 @ 1
initcall virtio_rng_driver_init+0x0/0x12 returned 0 after 2 usecs
calling  cn_proc_init+0x0/0x36 @ 1
initcall cn_proc_init+0x0/0x36 returned 0 after 0 usecs
calling  topology_sysfs_init+0x0/0x80 @ 1
initcall topology_sysfs_init+0x0/0x80 returned 0 after 5 usecs
calling  cacheinfo_sysfs_init+0x0/0x91 @ 1
initcall cacheinfo_sysfs_init+0x0/0x91 returned 0 after 83 usecs
calling  devcoredump_init+0x0/0x19 @ 1
initcall devcoredump_init+0x0/0x19 returned 0 after 2 usecs
calling  loop_init+0x0/0x140 @ 1
loop: module loaded
initcall loop_init+0x0/0x140 returned 0 after 1244 usecs
calling  init_cryptoloop+0x0/0x28 @ 1
initcall init_cryptoloop+0x0/0x28 returned 0 after 0 usecs
calling  init+0x0/0x7a @ 1
initcall init+0x0/0x7a returned 0 after 4 usecs
calling  raid_init+0x0/0x12 @ 1
initcall raid_init+0x0/0x12 returned 0 after 1 usecs
calling  spi_transport_init+0x0/0x77 @ 1
initcall spi_transport_init+0x0/0x77 returned 0 after 3 usecs
calling  fc_transport_init+0x0/0x80 @ 1
initcall fc_transport_init+0x0/0x80 returned 0 after 4 usecs
calling  sas_transport_init+0x0/0xb6 @ 1
initcall sas_transport_init+0x0/0xb6 returned 0 after 5 usecs
calling  sas_class_init+0x0/0x34 @ 1
initcall sas_class_init+0x0/0x34 returned 0 after 1 usecs
calling  blogic_init+0x0/0x1034 @ 1
initcall blogic_init+0x0/0x1034 returned 0 after 54 usecs
calling  isci_init+0x0/0x68 @ 1
isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
initcall isci_init+0x0/0x68 returned 0 after 8 usecs
calling  hpsa_init+0x0/0x4e @ 1
initcall hpsa_init+0x0/0x4e returned 0 after 5 usecs
calling  megasas_init+0x0/0x1a9 @ 1
megasas: 06.810.09.00-rc1
initcall megasas_init+0x0/0x1a9 returned 0 after 7 usecs
calling  _mpt3sas_init+0x0/0xe1 @ 1
mpt3sas version 12.100.00.00 loaded
initcall _mpt3sas_init+0x0/0xe1 returned 0 after 144 usecs
calling  init+0x0/0xcc @ 1
initcall init+0x0/0xcc returned 0 after 5 usecs
calling  pvscsi_init+0x0/0x35 @ 1
VMware PVSCSI driver - version 1.0.6.0-k
initcall pvscsi_init+0x0/0x35 returned 0 after 5 usecs
calling  storvsc_drv_init+0x0/0x84 @ 1
hv_vmbus: registering driver hv_storvsc
initcall storvsc_drv_init+0x0/0x84 returned -19 after 2 usecs
calling  init_sd+0x0/0x173 @ 1
initcall init_sd+0x0/0x173 returned 0 after 6 usecs
calling  init_sg+0x0/0xc1 @ 1
initcall init_sg+0x0/0xc1 returned 0 after 1 usecs
calling  nvme_core_init+0x0/0xaf @ 1
initcall nvme_core_init+0x0/0xaf returned 0 after 1 usecs
calling  nvme_init+0x0/0x5a @ 1
initcall nvme_init+0x0/0x5a returned 0 after 42 usecs
calling  ahci_pci_driver_init+0x0/0x1b @ 1
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst 
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xdf12c000 port 0xdf12c100 irq 121
ata2: SATA max UDMA/133 abar m2048@0xdf12c000 port 0xdf12c180 irq 121
ata3: SATA max UDMA/133 abar m2048@0xdf12c000 port 0xdf12c200 irq 121
ata4: SATA max UDMA/133 abar m2048@0xdf12c000 port 0xdf12c280 irq 121
ata5: SATA max UDMA/133 abar m2048@0xdf12c000 port 0xdf12c300 irq 121
ata6: SATA max UDMA/133 abar m2048@0xdf12c000 port 0xdf12c380 irq 121
initcall ahci_pci_driver_init+0x0/0x1b returned 0 after 20927 usecs
calling  ahci_driver_init+0x0/0x14 @ 1
initcall ahci_driver_init+0x0/0x14 returned 0 after 7 usecs
calling  piix_init+0x0/0x29 @ 1
initcall piix_init+0x0/0x29 returned 0 after 7 usecs
calling  sch_pci_driver_init+0x0/0x1b @ 1
initcall sch_pci_driver_init+0x0/0x1b returned 0 after 4 usecs
calling  mpiix_pci_driver_init+0x0/0x1b @ 1
initcall mpiix_pci_driver_init+0x0/0x1b returned 0 after 4 usecs
calling  ata_generic_pci_driver_init+0x0/0x1b @ 1
initcall ata_generic_pci_driver_init+0x0/0x1b returned 0 after 5 usecs
calling  drm_kms_helper_init+0x0/0x15 @ 1
initcall drm_kms_helper_init+0x0/0x15 returned 0 after 0 usecs
calling  drm_core_init+0x0/0xed @ 1
[drm] Initialized drm 1.1.0 20060810
initcall drm_core_init+0x0/0xed returned 0 after 6 usecs
calling  ttm_init+0x0/0x5d @ 1
initcall ttm_init+0x0/0x5d returned 0 after 6 usecs
calling  i915_init+0x0/0x9a @ 1
[drm] Memory usable by graphics device = 4096M
checking generic (c0000000 1d5000) vs hw (c0000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
request_firmware: i915/skl_dmc_ver1.bin
i915 0000:00:02.0: Direct firmware load for i915/skl_dmc_ver1.bin failed with error -2
i915 0000:00:02.0: Failed to load DMC firmware [], disabling runtime power management.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] failed to retrieve link info, disabling eDP
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
acpi device:0f: registered as cooling_device7
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[drm] Initialized i915 1.6.0 20160229 for 0000:00:02.0 on minor 0
initcall i915_init+0x0/0x9a returned 0 after 65567 usecs
calling  cirrus_init+0x0/0x3e @ 1
initcall cirrus_init+0x0/0x3e returned 0 after 5 usecs
calling  bochs_init+0x0/0x19 @ 1
initcall bochs_init+0x0/0x19 returned 0 after 5 usecs
calling  virtio_gpu_driver_init+0x0/0x12 @ 1
initcall virtio_gpu_driver_init+0x0/0x12 returned 0 after 3 usecs
calling  net_olddevs_init+0x0/0x62 @ 1
initcall net_olddevs_init+0x0/0x62 returned 0 after 1 usecs
calling  tun_init+0x0/0x86 @ 1
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
initcall tun_init+0x0/0x86 returned 0 after 64 usecs
calling  e100_init_module+0x0/0x59 @ 1
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
initcall e100_init_module+0x0/0x59 returned 0 after 7 usecs
calling  fusion_init+0x0/0xf4 @ 1
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
initcall fusion_init+0x0/0xf4 returned 0 after 2 usecs
calling  mptspi_init+0x0/0xec @ 1
Fusion MPT SPI Host driver 3.04.20
initcall mptspi_init+0x0/0xec returned 0 after 6 usecs
calling  mptsas_init+0x0/0x133 @ 1
Fusion MPT SAS Host driver 3.04.20
initcall mptsas_init+0x0/0x133 returned 0 after 6 usecs
calling  ehci_hcd_init+0x0/0xc1 @ 1
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
initcall ehci_hcd_init+0x0/0xc1 returned 0 after 2 usecs
calling  ehci_pci_init+0x0/0x67 @ 1
ehci-pci: EHCI PCI platform driver
initcall ehci_pci_init+0x0/0x67 returned 0 after 5 usecs
calling  uhci_hcd_init+0x0/0x117 @ 1
uhci_hcd: USB Universal Host Controller Interface driver
initcall uhci_hcd_init+0x0/0x117 returned 0 after 9 usecs
calling  xhci_hcd_init+0x0/0x15 @ 1
initcall xhci_hcd_init+0x0/0x15 returned 0 after 0 usecs
calling  xhci_pci_init+0x0/0x44 @ 1
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.6.4-245.native xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 12 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.6.4-245.native xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
initcall xhci_pci_init+0x0/0x44 returned 0 after 10442 usecs
calling  usb_storage_driver_init+0x0/0x30 @ 1
usbcore: registered new interface driver usb-storage
initcall usb_storage_driver_init+0x0/0x30 returned 0 after 9 usecs
calling  evdev_init+0x0/0x12 @ 1
initcall evdev_init+0x0/0x12 returned 0 after 206 usecs
calling  atkbd_init+0x0/0x27 @ 1
initcall atkbd_init+0x0/0x27 returned 0 after 5 usecs
calling  cmos_init+0x0/0x69 @ 1
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
initcall cmos_init+0x0/0x69 returned 0 after 534 usecs
calling  dw_i2c_driver_init+0x0/0x1b @ 1
initcall dw_i2c_driver_init+0x0/0x1b returned 0 after 5 usecs
calling  acpi_power_meter_init+0x0/0x37 @ 1
initcall acpi_power_meter_init+0x0/0x37 returned 0 after 15 usecs
calling  coretemp_init+0x0/0x85 @ 1
initcall coretemp_init+0x0/0x85 returned 0 after 84 usecs
calling  powerclamp_init+0x0/0x22f @ 1
initcall powerclamp_init+0x0/0x22f returned 0 after 12 usecs
calling  pkg_temp_thermal_init+0x0/0x161 @ 1
initcall pkg_temp_thermal_init+0x0/0x161 returned 0 after 55 usecs
calling  raid0_init+0x0/0x12 @ 1
md: raid0 personality registered for level 0
initcall raid0_init+0x0/0x12 returned 0 after 0 usecs
calling  raid_init+0x0/0x12 @ 1
md: raid1 personality registered for level 1
initcall raid_init+0x0/0x12 returned 0 after 0 usecs
calling  raid_init+0x0/0x12 @ 1
md: raid10 personality registered for level 10
initcall raid_init+0x0/0x12 returned 0 after 0 usecs
calling  dm_init+0x0/0x4c @ 1
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: [email protected]
initcall dm_init+0x0/0x4c returned 0 after 90 usecs
calling  cpufreq_stats_init+0x0/0xd7 @ 1
initcall cpufreq_stats_init+0x0/0xd7 returned 0 after 0 usecs
calling  cpufreq_gov_dbs_init+0x0/0x12 @ 1
initcall cpufreq_gov_dbs_init+0x0/0x12 returned 0 after 0 usecs
calling  mmc_blk_init+0x0/0x79 @ 1
initcall mmc_blk_init+0x0/0x79 returned 0 after 2 usecs
calling  sdhci_drv_init+0x0/0x20 @ 1
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
initcall sdhci_drv_init+0x0/0x20 returned 0 after 1 usecs
calling  sdhci_driver_init+0x0/0x1b @ 1
initcall sdhci_driver_init+0x0/0x1b returned 0 after 5 usecs
calling  sdhci_acpi_driver_init+0x0/0x14 @ 1
initcall sdhci_acpi_driver_init+0x0/0x14 returned 0 after 6 usecs
calling  dmi_sysfs_init+0x0/0x9d @ 1
initcall dmi_sysfs_init+0x0/0x9d returned 0 after 213 usecs
calling  efivars_sysfs_init+0x0/0x210 @ 1
EFI Variables Facility v0.08 2004-May-17
initcall efivars_sysfs_init+0x0/0x210 returned 0 after 4455 usecs
calling  esrt_sysfs_init+0x0/0x333 @ 1
initcall esrt_sysfs_init+0x0/0x333 returned 0 after 11 usecs
calling  efivars_pstore_init+0x0/0x9f @ 1
pstore: Registered efi as persistent store backend
initcall efivars_pstore_init+0x0/0x9f returned 0 after 1 usecs
calling  hid_init+0x0/0x5d @ 1
hidraw: raw HID events driver (C) Jiri Kosina
initcall hid_init+0x0/0x5d returned 0 after 7 usecs
calling  hid_generic_init+0x0/0x1b @ 1
initcall hid_generic_init+0x0/0x1b returned 0 after 3 usecs
calling  lg_driver_init+0x0/0x1b @ 1
initcall lg_driver_init+0x0/0x1b returned 0 after 2 usecs
calling  hid_init+0x0/0x4a @ 1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
initcall hid_init+0x0/0x4a returned 0 after 6 usecs
calling  i2c_hid_driver_init+0x0/0x14 @ 1
initcall i2c_hid_driver_init+0x0/0x14 returned 0 after 3 usecs
calling  gpio_clk_driver_init+0x0/0x14 @ 1
initcall gpio_clk_driver_init+0x0/0x14 returned 0 after 3 usecs
calling  powercap_init+0x0/0x285 @ 1
initcall powercap_init+0x0/0x285 returned 0 after 14 usecs
calling  rapl_init+0x0/0x38d @ 1
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
initcall rapl_init+0x0/0x38d returned 0 after 513 usecs
calling  sock_diag_init+0x0/0x35 @ 1
initcall sock_diag_init+0x0/0x35 returned 0 after 8 usecs
calling  llc_init+0x0/0x20 @ 1
initcall llc_init+0x0/0x20 returned 0 after 0 usecs
calling  snap_init+0x0/0x38 @ 1
initcall snap_init+0x0/0x38 returned 0 after 0 usecs
calling  blackhole_init+0x0/0x12 @ 1
initcall blackhole_init+0x0/0x12 returned 0 after 0 usecs
calling  cbq_module_init+0x0/0x12 @ 1
initcall cbq_module_init+0x0/0x12 returned 0 after 0 usecs
calling  multiq_module_init+0x0/0x12 @ 1
initcall multiq_module_init+0x0/0x12 returned 0 after 0 usecs
calling  codel_module_init+0x0/0x12 @ 1
initcall codel_module_init+0x0/0x12 returned 0 after 0 usecs
calling  fq_codel_module_init+0x0/0x12 @ 1
initcall fq_codel_module_init+0x0/0x12 returned 0 after 0 usecs
calling  fq_module_init+0x0/0x51 @ 1
initcall fq_module_init+0x0/0x51 returned 0 after 2 usecs
calling  init_cgroup_cls+0x0/0x12 @ 1
initcall init_cgroup_cls+0x0/0x12 returned 0 after 0 usecs
calling  nfnetlink_init+0x0/0x6e @ 1
Netfilter messages via NETLINK v0.30.
initcall nfnetlink_init+0x0/0x6e returned 0 after 1 usecs
calling  nfnl_acct_init+0x0/0x64 @ 1
nfnl_acct: registering with nfnetlink.
initcall nfnl_acct_init+0x0/0x64 returned 0 after 0 usecs
calling  nfnetlink_queue_init+0x0/0x86 @ 1
initcall nfnetlink_queue_init+0x0/0x86 returned 0 after 3 usecs
calling  nfnetlink_log_init+0x0/0x9a @ 1
initcall nfnetlink_log_init+0x0/0x9a returned 0 after 0 usecs
calling  xt_init+0x0/0x10e @ 1
initcall xt_init+0x0/0x10e returned 0 after 0 usecs
calling  tcpudp_mt_init+0x0/0x17 @ 1
initcall tcpudp_mt_init+0x0/0x17 returned 0 after 0 usecs
calling  mark_mt_init+0x0/0x3d @ 1
initcall mark_mt_init+0x0/0x3d returned 0 after 0 usecs
calling  gre_offload_init+0x0/0x17 @ 1
initcall gre_offload_init+0x0/0x17 returned 0 after 0 usecs
calling  sysctl_ipv4_init+0x0/0x4c @ 1
initcall sysctl_ipv4_init+0x0/0x4c returned 0 after 25 usecs
calling  ipip_init+0x0/0x83 @ 1
ipip: IPv4 over IPv4 tunneling driver
initcall ipip_init+0x0/0x83 returned 0 after 56 usecs
calling  tunnel4_init+0x0/0x6c @ 1
initcall tunnel4_init+0x0/0x6c returned 0 after 0 usecs
calling  cubictcp_register+0x0/0x5a @ 1
initcall cubictcp_register+0x0/0x5a returned 0 after 0 usecs
calling  xfrm_user_init+0x0/0x45 @ 1
Initializing XFRM netlink socket
initcall xfrm_user_init+0x0/0x45 returned 0 after 1 usecs
calling  inet6_init+0x0/0x2f9 @ 1
NET: Registered protocol family 10
initcall inet6_init+0x0/0x2f9 returned 0 after 214 usecs
calling  packet_init+0x0/0x42 @ 1
NET: Registered protocol family 17
initcall packet_init+0x0/0x42 returned 0 after 1 usecs
calling  packet_diag_init+0x0/0x12 @ 1
initcall packet_diag_init+0x0/0x12 returned 0 after 0 usecs
calling  br_init+0x0/0xdc @ 1
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
initcall br_init+0x0/0xdc returned 0 after 4 usecs
calling  br_netfilter_init+0x0/0xa9 @ 1
Bridge firewalling registered
initcall br_netfilter_init+0x0/0xa9 returned 0 after 3 usecs
calling  ebtables_init+0x0/0x49 @ 1
Ebtables v2.0 registered
initcall ebtables_init+0x0/0x49 returned 0 after 0 usecs
calling  ebtable_broute_init+0x0/0x23 @ 1
initcall ebtable_broute_init+0x0/0x23 returned 0 after 2 usecs
calling  ebtable_filter_init+0x0/0x3e @ 1
initcall ebtable_filter_init+0x0/0x3e returned 0 after 2 usecs
calling  ebtable_nat_init+0x0/0x3e @ 1
initcall ebtable_nat_init+0x0/0x3e returned 0 after 1 usecs
calling  ebt_802_3_init+0x0/0x12 @ 1
initcall ebt_802_3_init+0x0/0x12 returned 0 after 0 usecs
calling  ebt_among_init+0x0/0x12 @ 1
initcall ebt_among_init+0x0/0x12 returned 0 after 0 usecs
calling  ebt_arp_init+0x0/0x12 @ 1
initcall ebt_arp_init+0x0/0x12 returned 0 after 0 usecs
calling  ebt_ip_init+0x0/0x12 @ 1
initcall ebt_ip_init+0x0/0x12 returned 0 after 0 usecs
calling  ebt_ip6_init+0x0/0x12 @ 1
initcall ebt_ip6_init+0x0/0x12 returned 0 after 0 usecs
calling  ebt_limit_init+0x0/0x12 @ 1
initcall ebt_limit_init+0x0/0x12 returned 0 after 0 usecs
calling  ebt_mark_m_init+0x0/0x12 @ 1
initcall ebt_mark_m_init+0x0/0x12 returned 0 after 0 usecs
calling  ebt_pkttype_init+0x0/0x12 @ 1
initcall ebt_pkttype_init+0x0/0x12 returned 0 after 0 usecs
calling  ebt_stp_init+0x0/0x12 @ 1
initcall ebt_stp_init+0x0/0x12 returned 0 after 0 usecs
calling  ebt_vlan_init+0x0/0x2e @ 1
initcall ebt_vlan_init+0x0/0x2e returned 0 after 0 usecs
calling  ebt_arpreply_init+0x0/0x12 @ 1
initcall ebt_arpreply_init+0x0/0x12 returned 0 after 0 usecs
calling  ebt_mark_init+0x0/0x12 @ 1
initcall ebt_mark_init+0x0/0x12 returned 0 after 0 usecs
calling  ebt_dnat_init+0x0/0x12 @ 1
initcall ebt_dnat_init+0x0/0x12 returned 0 after 0 usecs
calling  ebt_redirect_init+0x0/0x12 @ 1
initcall ebt_redirect_init+0x0/0x12 returned 0 after 0 usecs
calling  ebt_snat_init+0x0/0x12 @ 1
initcall ebt_snat_init+0x0/0x12 returned 0 after 0 usecs
calling  ebt_log_init+0x0/0x12 @ 1
initcall ebt_log_init+0x0/0x12 returned 0 after 0 usecs
calling  ebt_nflog_init+0x0/0x12 @ 1
initcall ebt_nflog_init+0x0/0x12 returned 0 after 0 usecs
calling  mcheck_init_device+0x0/0x181 @ 1
initcall mcheck_init_device+0x0/0x181 returned 0 after 85 usecs
calling  tboot_late_init+0x0/0x258 @ 1
initcall tboot_late_init+0x0/0x258 returned 0 after 0 usecs
calling  mcheck_late_init+0x0/0x5b @ 1
initcall mcheck_late_init+0x0/0x5b returned 0 after 1 usecs
calling  severities_debugfs_init+0x0/0x3b @ 1
initcall severities_debugfs_init+0x0/0x3b returned 0 after 0 usecs
calling  microcode_init+0x0/0x1ac @ 1
microcode: CPU0 sig=0x506e3, pf=0x2, revision=0x7c
microcode: CPU1 sig=0x506e3, pf=0x2, revision=0x7c
microcode: Microcode Update Driver: v2.01 , Peter Oruba
initcall microcode_init+0x0/0x1ac returned 0 after 75 usecs
calling  hpet_insert_resource+0x0/0x24 @ 1
initcall hpet_insert_resource+0x0/0x24 returned 0 after 0 usecs
calling  update_mp_table+0x0/0x43e @ 1
initcall update_mp_table+0x0/0x43e returned 0 after 0 usecs
calling  lapic_insert_resource+0x0/0x40 @ 1
initcall lapic_insert_resource+0x0/0x40 returned 0 after 0 usecs
calling  print_ICs+0x0/0x1a5 @ 1
initcall print_ICs+0x0/0x1a5 returned 0 after 0 usecs
calling  pat_memtype_list_init+0x0/0x35 @ 1
initcall pat_memtype_list_init+0x0/0x35 returned 0 after 0 usecs
calling  create_tlb_single_page_flush_ceiling+0x0/0x29 @ 1
initcall create_tlb_single_page_flush_ceiling+0x0/0x29 returned 0 after 0 usecs
calling  aesni_init+0x0/0x127 @ 1
SSE version of gcm_enc/dec engaged.
initcall aesni_init+0x0/0x127 returned 0 after 1916 usecs
calling  init_oops_id+0x0/0x40 @ 1
initcall init_oops_id+0x0/0x40 returned 0 after 1 usecs
calling  sched_init_debug+0x0/0x24 @ 1
initcall sched_init_debug+0x0/0x24 returned 0 after 0 usecs
calling  pm_qos_power_init+0x0/0xac @ 1
initcall pm_qos_power_init+0x0/0xac returned 0 after 248 usecs
calling  printk_late_init+0x0/0x65 @ 1
initcall printk_late_init+0x0/0x65 returned 0 after 0 usecs
calling  tk_debug_sleep_time_init+0x0/0x3c @ 1
initcall tk_debug_sleep_time_init+0x0/0x3c returned 0 after 0 usecs
calling  taskstats_init+0x0/0x6c @ 1
registered taskstats version 1
initcall taskstats_init+0x0/0x6c returned 0 after 3 usecs
calling  clear_boot_tracer+0x0/0x2e @ 1
initcall clear_boot_tracer+0x0/0x2e returned 0 after 0 usecs
calling  register_htab_map+0x0/0x20 @ 1
initcall register_htab_map+0x0/0x20 returned 0 after 0 usecs
calling  register_perf_event_array_map+0x0/0x14 @ 1
initcall register_perf_event_array_map+0x0/0x14 returned 0 after 0 usecs
calling  register_prog_array_map+0x0/0x14 @ 1
initcall register_prog_array_map+0x0/0x14 returned 0 after 0 usecs
calling  register_array_map+0x0/0x20 @ 1
initcall register_array_map+0x0/0x20 returned 0 after 0 usecs
calling  register_stack_map+0x0/0x14 @ 1
initcall register_stack_map+0x0/0x14 returned 0 after 0 usecs
calling  load_system_certificate_list+0x0/0xf5 @ 1
Loading compiled-in X.509 certificates
call_modprobe: crypto-pkcs1pad(rsa,sha512)   2 
call_modprobe: crypto-pkcs1pad(rsa,sha512)-all   2 
Loaded X.509 cert 'Build time autogenerated kernel key: 9fa25af399e8eb68662d6026743050e81d4aef6c'
initcall load_system_certificate_list+0x0/0xf5 returned 0 after 1066 usecs
calling  fault_around_debugfs+0x0/0x35 @ 1
initcall fault_around_debugfs+0x0/0x35 returned 0 after 0 usecs
calling  max_swapfiles_check+0x0/0x8 @ 1
initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs
calling  split_huge_pages_debugfs+0x0/0x35 @ 1
initcall split_huge_pages_debugfs+0x0/0x35 returned 0 after 0 usecs
calling  check_early_ioremap_leak+0x0/0x42 @ 1
initcall check_early_ioremap_leak+0x0/0x42 returned 0 after 0 usecs
calling  init_btrfs_fs+0x0/0x121 @ 1
Btrfs loaded
initcall init_btrfs_fs+0x0/0x121 returned 0 after 271 usecs
calling  init_root_keyring+0x0/0xb @ 1
initcall init_root_keyring+0x0/0xb returned 0 after 5 usecs
calling  prandom_reseed+0x0/0x40 @ 1
initcall prandom_reseed+0x0/0x40 returned 0 after 3 usecs
calling  pci_resource_alignment_sysfs_init+0x0/0x22 @ 1
initcall pci_resource_alignment_sysfs_init+0x0/0x22 returned 0 after 0 usecs
calling  pci_sysfs_init+0x0/0x55 @ 1
initcall pci_sysfs_init+0x0/0x55 returned 0 after 498 usecs
calling  dmar_free_unused_resources+0x0/0xbb @ 1
initcall dmar_free_unused_resources+0x0/0xbb returned 0 after 0 usecs
calling  deferred_probe_initcall+0x0/0x70 @ 1
initcall deferred_probe_initcall+0x0/0x70 returned 0 after 36 usecs
calling  acpi_cpufreq_init+0x0/0x1e5 @ 1
initcall acpi_cpufreq_init+0x0/0x1e5 returned 0 after 283 usecs
calling  firmware_memmap_init+0x0/0x33 @ 1
initcall firmware_memmap_init+0x0/0x33 returned 0 after 31 usecs
calling  efi_shutdown_init+0x0/0x31 @ 1
initcall efi_shutdown_init+0x0/0x31 returned 0 after 0 usecs
calling  clk_debug_init+0x0/0x147 @ 1
initcall clk_debug_init+0x0/0x147 returned 0 after 3 usecs
calling  pci_mmcfg_late_insert_resources+0x0/0x53 @ 1
initcall pci_mmcfg_late_insert_resources+0x0/0x53 returned 0 after 0 usecs
calling  register_sk_filter_ops+0x0/0x2c @ 1
initcall register_sk_filter_ops+0x0/0x2c returned 0 after 0 usecs
calling  tcp_congestion_default+0x0/0x12 @ 1
initcall tcp_congestion_default+0x0/0x12 returned 0 after 0 usecs
calling  clk_disable_unused+0x0/0x160 @ 1
initcall clk_disable_unused+0x0/0x160 returned 0 after 0 usecs
calling  init_default_flow_dissectors+0x0/0x38 @ 1
initcall init_default_flow_dissectors+0x0/0x38 returned 0 after 0 usecs
ata5: SATA link down (SStatus 4 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata6: SATA link down (SStatus 4 SControl 300)
ata1: SATA link down (SStatus 4 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: supports DRM functions and may not be fully accessible
ata4.00: READ LOG DMA EXT failed, trying unqueued
ata4.00: failed to get NCQ Send/Recv Log Emask 0x1
ata4.00: ATA-9: Samsung SSD 850 EVO 120GB, EMT01B6Q, max UDMA/133
ata4.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata4.00: supports DRM functions and may not be fully accessible
ata4.00: failed to get NCQ Send/Recv Log Emask 0x1
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access     ATA      Samsung SSD 850  1B6Q PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 3:0:0:0: [sda] Attached SCSI disk
i915 0000:00:02.0: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 8:3.
devtmpfs: mounted
Freeing unused kernel memory: 1084K (ffffffffa1f65000 - ffffffffa2074000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 208K (ffff8800219cc000 - ffff880021a00000)
Freeing unused kernel memory: 120K (ffff880021de2000 - ffff880021e00000)
tsc: Refined TSC clocksource calibration: 3312.006 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fbd9a18d24, max_idle_ns: 440795246168 ns
clocksource: Switched to clocksource tsc
systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR -SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL -XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
call_modprobe: net-pf-16-proto-9   2 
systemd[1]: Reached target Remote File Systems.
systemd[1]: Listening on Network Service Netlink Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Mounting Temporary Directory...
systemd[1]: Reached target Slices.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
random: systemd-random- urandom read with 57 bits of entropy available
systemd[1]: Started Load/Save Random Seed.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Mounted Temporary Directory.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Reached target Local File Systems.
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Started Journal Service.
systemd-journald[149]: Received request to flush runtime journal from PID 1
calling  tpm_init+0x0/0x1000 [tpm] @ 170
initcall tpm_init+0x0/0x1000 [tpm] returned 0 after 3 usecs
calling  init_tis+0x0/0x1000 [tpm_tis] @ 172
initcall init_tis+0x0/0x1000 [tpm_tis] returned 0 after 36 usecs
calling  i8042_init+0x0/0x6ca [i8042] @ 177
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
initcall i8042_init+0x0/0x6ca [i8042] returned 0 after 6186 usecs
calling  shpcd_init+0x0/0x1000 [shpchp] @ 170
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
initcall shpcd_init+0x0/0x1000 [shpchp] returned 0 after 12 usecs
calling  init_soundcore+0x0/0x1000 [soundcore] @ 199
initcall init_soundcore+0x0/0x1000 [soundcore] returned 0 after 3 usecs
calling  alsa_sound_init+0x0/0x82 [snd] @ 199
initcall alsa_sound_init+0x0/0x82 [snd] returned 0 after 3 usecs
calling  alsa_pcm_init+0x0/0x1000 [snd_pcm] @ 199
initcall alsa_pcm_init+0x0/0x1000 [snd_pcm] returned 0 after 1 usecs
calling  hda_bus_init+0x0/0x12 [snd_hda_core] @ 199
initcall hda_bus_init+0x0/0x12 [snd_hda_core] returned 0 after 5 usecs
calling  rtl8169_pci_driver_init+0x0/0x1000 [r8169] @ 175
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
calling  alsa_hwdep_init+0x0/0x1000 [snd_hwdep] @ 199
initcall alsa_hwdep_init+0x0/0x1000 [snd_hwdep] returned 0 after 1 usecs
r8169 0000:02:00.0 eth0: RTL8168h/8111h at 0xffffc90000cc8000, d8:cb:8a:eb:d5:b9, XID 14100800 IRQ 124
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
initcall rtl8169_pci_driver_init+0x0/0x1000 [r8169] returned 0 after 3602 usecs
r8169 0000:02:00.0 enp2s0: renamed from eth0
calling  azx_driver_init+0x0/0xfd4 [snd_hda_intel] @ 199
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
initcall azx_driver_init+0x0/0xfd4 [snd_hda_intel] returned 0 after 109 usecs
calling  serio_raw_drv_init+0x0/0x1000 [serio_raw] @ 210
initcall serio_raw_drv_init+0x0/0x1000 [serio_raw] returned 0 after 7 usecs
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops)
call_modprobe: i915   2 
calling  psmouse_init+0x0/0x81 [psmouse] @ 210
initcall psmouse_init+0x0/0x81 [psmouse] returned 0 after 27 usecs
call_modprobe: hdaudio:v10EC0892r00100302a01
                  2 
calling  generic_driver_init+0x0/0x1000 [snd_hda_codec_generic] @ 252
initcall generic_driver_init+0x0/0x1000 [snd_hda_codec_generic] returned 0 after 9 usecs
calling  realtek_driver_init+0x0/0x1000 [snd_hda_codec_realtek] @ 252
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0:    inputs:
snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
Adding 524284k swap on /dev/sda2.  Priority:-1 extents:1 across:524284k SS
initcall realtek_driver_init+0x0/0x1000 [snd_hda_codec_realtek] returned 0 after 12126 usecs
call_modprobe: hdaudio:v80862809r00100000a01
                  2 
calling  hdmi_driver_init+0x0/0x1000 [snd_hda_codec_hdmi] @ 255
initcall hdmi_driver_init+0x0/0x1000 [snd_hda_codec_hdmi] returned 0 after 2001 usecs
random: nonblocking pool is initialized
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
request_firmware: rtl_nic/rtl8168h-2.fw
r8169 0000:02:00.0 enp2s0: link down
r8169 0000:02:00.0 enp2s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[drm] RC6 on
calling  fuse_init+0x0/0x19e [fuse] @ 400
fuse init (API version 7.24)
initcall fuse_init+0x0/0x19e [fuse] returned 0 after 45 usecs
r8169 0000:02:00.0 enp2s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
python (5191): drop_caches: 3
python (5191): drop_caches: 3
python (5253): drop_caches: 3
python (5253): drop_caches: 3
python (5369): drop_caches: 3
python (5369): drop_caches: 3
python (5485): drop_caches: 3
python (5485): drop_caches: 3
python (5548): drop_caches: 3
python (5548): drop_caches: 3
python (5664): drop_caches: 3
python (5664): drop_caches: 3

Return To 2016-07-20 System Information