dmesg - blk_mq
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-28-generic (buildd@lcy01-13) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2.1) ) #47-Ubuntu SMP Fri Jun 24 10:09:13 UTC 2016 (Ubuntu 4.4.0-28.47-generic 4.4.13)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
tseg: 00dfc00000
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000086fff] usable
BIOS-e820: [mem 0x0000000000087000-0x0000000000087fff] reserved
BIOS-e820: [mem 0x0000000000088000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000d9795fff] usable
BIOS-e820: [mem 0x00000000d9796000-0x00000000da195fff] reserved
BIOS-e820: [mem 0x00000000da196000-0x00000000df39efff] usable
BIOS-e820: [mem 0x00000000df39f000-0x00000000dfa9efff] reserved
BIOS-e820: [mem 0x00000000dfa9f000-0x00000000dfb9efff] ACPI NVS
BIOS-e820: [mem 0x00000000dfb9f000-0x00000000dfbfefff] ACPI data
BIOS-e820: [mem 0x00000000dfbff000-0x00000000dfbfffff] usable
BIOS-e820: [mem 0x00000000f0900000-0x00000000f09fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000003feffffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0xd7ee7018-0xd7ef6c57] usable ==> usable
e820: update [mem 0xd7eda018-0xd7ee6857] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x0000000000086fff] usable
reserve setup_data: [mem 0x0000000000087000-0x0000000000087fff] reserved
reserve setup_data: [mem 0x0000000000088000-0x000000000009ffff] usable
reserve setup_data: [mem 0x0000000000100000-0x00000000d7eda017] usable
reserve setup_data: [mem 0x00000000d7eda018-0x00000000d7ee6857] usable
reserve setup_data: [mem 0x00000000d7ee6858-0x00000000d7ee7017] usable
reserve setup_data: [mem 0x00000000d7ee7018-0x00000000d7ef6c57] usable
reserve setup_data: [mem 0x00000000d7ef6c58-0x00000000d9795fff] usable
reserve setup_data: [mem 0x00000000d9796000-0x00000000da195fff] reserved
reserve setup_data: [mem 0x00000000da196000-0x00000000df39efff] usable
reserve setup_data: [mem 0x00000000df39f000-0x00000000dfa9efff] reserved
reserve setup_data: [mem 0x00000000dfa9f000-0x00000000dfb9efff] ACPI NVS
reserve setup_data: [mem 0x00000000dfb9f000-0x00000000dfbfefff] ACPI data
reserve setup_data: [mem 0x00000000dfbff000-0x00000000dfbfffff] usable
reserve setup_data: [mem 0x00000000f0900000-0x00000000f09fffff] reserved
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
reserve setup_data: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x00000003feffffff] usable
efi: EFI v2.40 by INSYDE Corp.
efi: SMBIOS=0xdf644000 ESRT=0xdf648b18 ACPI 2.0=0xdfbfe014
esrt: Reserving ESRT space from 0x00000000df648b18 to 0x00000000df648b50.
SMBIOS 2.8 present.
DMI: TOSHIBA SATELLITE L50D-C/06F6, BIOS 5.20 10/05/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x3ff000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 base 0000FF800000 mask FFFFFF800000 write-protect
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000041f000000 aka 16880M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0xdfc00 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
BRK [0x02200000, 0x02200fff] PGTABLE
BRK [0x02201000, 0x02201fff] PGTABLE
BRK [0x02202000, 0x02202fff] PGTABLE
BRK [0x02203000, 0x02203fff] PGTABLE
BRK [0x02204000, 0x02204fff] PGTABLE
BRK [0x02205000, 0x02205fff] PGTABLE
RAMDISK: [mem 0x3ddb6000-0x3fffafff]
Secure boot enabled
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DFBFE014 000024 (v02 TOSQCI)
ACPI: XSDT 0x00000000DFBC3188 0000F4 (v01 TOSQCI TOSQCI00 00000001 01000013)
ACPI: FACP 0x00000000DFBF8000 00010C (v05 TOSQCI TOSQCI00 00000001 ACPI 00040000)
ACPI: DSDT 0x00000000DFBE4000 00CB3D (v01 TOSQCI TOSQCI00 00040000 ACPI 00040000)
ACPI: FACS 0x00000000DFB43000 000040
ACPI: UEFI 0x00000000DFBFC000 001036 (v01 TOSQCI TOSQCI00 00000001 ACPI 00040000)
ACPI: UEFI 0x00000000DFBFB000 000042 (v01 TOSQCI TOSQCI00 00000000 00000000)
ACPI: ASF! 0x00000000DFBFA000 0000A5 (v32 TOSQCI TOSQCI00 00000001 ACPI 00040000)
ACPI: BOOT 0x00000000DFBF9000 000028 (v01 TOSQCI TOSQCI00 00000001 ACPI 00040000)
ACPI: HPET 0x00000000DFBF7000 000038 (v01 TOSQCI TOSQCI00 00000001 ACPI 00040000)
ACPI: APIC 0x00000000DFBF6000 000090 (v03 TOSQCI TOSQCI00 00000001 ACPI 00040000)
ACPI: MCFG 0x00000000DFBF5000 00003C (v01 TOSQCI TOSQCI00 00000001 ACPI 00040000)
ACPI: SLIC 0x00000000DFBF4000 000176 (v01 TOSQCI TOSQCI00 00000001 ACPI 00040000)
ACPI: SPCR 0x00000000DFBF3000 000050 (v01 TOSQCI TOSQCI00 00000001 ACPI 00040000)
ACPI: WDAT 0x00000000DFBF2000 00017C (v01 TOSQCI TOSQCI00 00000001 ACPI 00040000)
ACPI: WDRT 0x00000000DFBF1000 000047 (v01 TOSQCI TOSQCI00 00000000 ACPI 00040000)
ACPI: MSDM 0x00000000DFBE3000 000055 (v03 TOSQCI TOSQCI00 00000001 ACPI 00040000)
ACPI: SSDT 0x00000000DFBE2000 000854 (v01 AMD AGESA 00000001 AMD 00000001)
ACPI: SSDT 0x00000000DFBD9000 00873A (v02 AMD AGESA 00000002 MSFT 04000000)
ACPI: IVRS 0x00000000DFBD8000 0000D0 (v02 TOSQCI TOSQCI00 00000001 AMD 00000000)
ACPI: CRAT 0x00000000DFBD7000 0005A0 (v01 TOSQCI TOSQCI00 00000001 AMD 00000001)
ACPI: VFCT 0x00000000DFBC7000 00FC84 (v01 TOSQCI TOSQCI00 00000001 AMD 31504F47)
ACPI: SSDT 0x00000000DFBC6000 000462 (v01 Insyde TPMACPI 00001000 INTL 20120816)
ACPI: TPM2 0x00000000DFBC5000 000034 (v03 TOSQCI TOSQCI00 00000000 00000000)
ACPI: SSDT 0x00000000DFBC4000 000692 (v01 AMD CPMADPS4 00000001 INTL 20120816)
ACPI: SSDT 0x00000000DFBC1000 00147F (v01 AMD CPMDFIGP 00000001 INTL 20120816)
ACPI: SSDT 0x00000000DFBBF000 0015F0 (v01 AMD CPMCMN 00000001 INTL 20120816)
ACPI: FPDT 0x00000000DFBBE000 000044 (v01 TOSQCI TOSQCI00 00000002 01000013)
ACPI: SSDT 0x00000000DFBBC000 000FDB (v01 AMD CPMZPODD 00000001 INTL 20120816)
ACPI: BGRT 0x00000000DFBBD000 000038 (v01 TOSQCI TOSQCI00 00000001 ACPI 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000003feffffff]
NODE_DATA(0) allocated [mem 0x3feff8000-0x3feffcfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000003feffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000086fff]
node 0: [mem 0x0000000000088000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x00000000d9795fff]
node 0: [mem 0x00000000da196000-0x00000000df39efff]
node 0: [mem 0x00000000dfbff000-0x00000000dfbfffff]
node 0: [mem 0x0000000100000000-0x00000003feffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000003feffffff]
On node 0 totalpages: 4053310
DMA zone: 64 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 14183 pages used for memmap
DMA32 zone: 907680 pages, LIFO batch:31
Normal zone: 49088 pages used for memmap
Normal zone: 3141632 pages, LIFO batch:31
tboot: non-0 tboot_addr but it is not of type E820_RESERVED
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00087000-0x00087fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xd7eda000-0xd7edafff]
PM: Registered nosave memory: [mem 0xd7ee6000-0xd7ee6fff]
PM: Registered nosave memory: [mem 0xd7ee7000-0xd7ee7fff]
PM: Registered nosave memory: [mem 0xd7ef6000-0xd7ef6fff]
PM: Registered nosave memory: [mem 0xd9796000-0xda195fff]
PM: Registered nosave memory: [mem 0xdf39f000-0xdfa9efff]
PM: Registered nosave memory: [mem 0xdfa9f000-0xdfb9efff]
PM: Registered nosave memory: [mem 0xdfb9f000-0xdfbfefff]
PM: Registered nosave memory: [mem 0xdfc00000-0xf08fffff]
PM: Registered nosave memory: [mem 0xf0900000-0xf09fffff]
PM: Registered nosave memory: [mem 0xf0a00000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
e820: [mem 0xdfc00000-0xf08fffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff8803fec00000 s98008 r8192 d28968 u524288
pcpu-alloc: s98008 r8192 d28968 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 3989953
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 15789132K/16213240K available (8368K kernel code, 1280K rwdata, 3928K rodata, 1480K init, 1292K bss, 424108K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:1000 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1796.510 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3593.02 BogoMIPS (lpj=7186040)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 8 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff820b4000 - ffffffff820bb000)
ftrace: allocating 31920 entries in 125 pages
smpboot: Max logical packages: 2
smpboot: APIC(10) Converting physical 1 to logical package 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A10-8700P Radeon R6, 10 Compute Cores 4C+6G (family: 0x15, model: 0x60, stepping: 0x1)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (14372.08 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xdfa9f000-0xdfb9efff] (1048576 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 9:58:55, date: 07/03/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
Simple Boot Flag at 0x44 set to 0x80
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [P0U2] (off)
ACPI: Power Resource [P0U3] (off)
ACPI: Power Resource [P3U3] (off)
ACPI: Power Resource [P0ST] (on)
ACPI: Power Resource [P3ST] (on)
ACPI: Power Resource [P0SA] (off)
ACPI: Power Resource [P3SA] (off)
ACPI: Power Resource [P3U2] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window]
pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1576] type 00 class 0x060000
pci 0000:00:00.2: [1022:1577] type 00 class 0x080600
pci 0000:00:01.0: [1002:9874] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
pci 0000:00:01.0: reg 0x20: [io 0x4000-0x40ff]
pci 0000:00:01.0: reg 0x24: [mem 0xf0d00000-0xf0d3ffff]
pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.0: PME# supported from D1 D2 D3hot
pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xf0d60000-0xf0d63fff 64bit]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:02.0: [1022:157b] type 00 class 0x060000
pci 0000:00:02.2: [1022:157c] type 01 class 0x060400
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: System wakeup disabled by ACPI
pci 0000:00:02.3: [1022:157c] type 01 class 0x060400
pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.4: [1022:157c] type 01 class 0x060400
pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [1022:157b] type 00 class 0x060000
pci 0000:00:08.0: [1022:1578] type 00 class 0x108000
pci 0000:00:08.0: reg 0x10: [mem 0xf0d40000-0xf0d5ffff 64bit pref]
pci 0000:00:08.0: reg 0x18: [mem 0xf0a00000-0xf0afffff]
pci 0000:00:08.0: reg 0x1c: [mem 0xf0d70000-0xf0d70fff]
pci 0000:00:08.0: reg 0x24: [mem 0xf0d6a000-0xf0d6bfff]
pci 0000:00:09.0: [1022:157d] type 00 class 0x060000
pci 0000:00:09.2: [1022:157a] type 00 class 0x040300
pci 0000:00:09.2: reg 0x10: [mem 0xf0d64000-0xf0d67fff]
pci 0000:00:09.2: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [1022:7914] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xf0d68000-0xf0d69fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1022:7901] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0x4118-0x411f]
pci 0000:00:11.0: reg 0x14: [io 0x4124-0x4127]
pci 0000:00:11.0: reg 0x18: [io 0x4110-0x4117]
pci 0000:00:11.0: reg 0x1c: [io 0x4120-0x4123]
pci 0000:00:11.0: reg 0x20: [io 0x4100-0x410f]
pci 0000:00:11.0: reg 0x24: [mem 0xf0d6c000-0xf0d6c3ff]
pci 0000:00:11.0: PME# supported from D3hot
pci 0000:00:12.0: [1022:7908] type 00 class 0x0c0320
pci 0000:00:12.0: reg 0x10: [mem 0xf0d6e000-0xf0d6e0ff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:14.7: [1022:7906] type 00 class 0x080501
pci 0000:00:14.7: reg 0x10: [mem 0xf0d6d000-0xf0d6d0ff 64bit]
pci 0000:00:14.7: PME# supported from D3cold
pci 0000:00:18.0: [1022:1570] type 00 class 0x060000
pci 0000:00:18.1: [1022:1571] type 00 class 0x060000
pci 0000:00:18.2: [1022:1572] type 00 class 0x060000
pci 0000:00:18.3: [1022:1573] type 00 class 0x060000
pci 0000:00:18.4: [1022:1574] type 00 class 0x060000
pci 0000:00:18.5: [1022:1575] type 00 class 0x060000
pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff]
pci 0000:01:00.0: reg 0x18: [mem 0xf0804000-0xf0804fff 64bit pref]
pci 0000:01:00.0: reg 0x20: [mem 0xf0800000-0xf0803fff 64bit pref]
pci 0000:01:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:02.2: PCI bridge to [bus 01]
pci 0000:00:02.2: bridge window [io 0x3000-0x3fff]
pci 0000:00:02.2: bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
pci 0000:02:00.0: [10ec:8821] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff]
pci 0000:02:00.0: reg 0x18: [mem 0xf0c00000-0xf0c03fff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.3: PCI bridge to [bus 02]
pci 0000:00:02.3: bridge window [io 0x2000-0x2fff]
pci 0000:00:02.3: bridge window [mem 0xf0c00000-0xf0cfffff]
pci 0000:03:00.0: [10ec:5229] type 00 class 0xff0000
pci 0000:03:00.0: reg 0x10: [mem 0xf0b00000-0xf0b00fff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot
pci 0000:00:02.4: PCI bridge to [bus 03]
pci 0000:00:02.4: bridge window [mem 0xf0b00000-0xf0bfffff]
ACPI: IRQ 7 override to edge, high
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 6 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 6 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 6 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 6 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 5 6 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 5 6 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 5 6 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 5 6 10 11) *0, disabled.
ACPI: Enabled 1 GPEs in block 00 to 1F
ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:01.0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00087000-0x0008ffff]
e820: reserve RAM buffer [mem 0xd7eda018-0xd7ffffff]
e820: reserve RAM buffer [mem 0xd7ee7018-0xd7ffffff]
e820: reserve RAM buffer [mem 0xd9796000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdf39f000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdfc00000-0xdfffffff]
e820: reserve RAM buffer [mem 0x3ff000000-0x3ffffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: [mem 0xf0900000-0xf09fffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs TOS1102 PNP0303 (active)
pnp 00:03: Plug and Play ACPI device, IDs TSH111a SYN1000 SYN0002 PNP0f13 (active)
system 00:04: [io 0x0400-0x04cf] could not be reserved
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x04d6] has been reserved
system 00:04: [io 0x0c00-0x0c01] has been reserved
system 00:04: [io 0x0c14] has been reserved
system 00:04: [io 0x0c50-0x0c52] has been reserved
system 00:04: [io 0x0c6c] has been reserved
system 00:04: [io 0x0c6f] has been reserved
system 00:04: [io 0x0cd0-0x0cdb] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:05: [mem 0xff800000-0xffffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
pci 0000:01:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
pci 0000:00:02.2: BAR 14: assigned [mem 0xf0e00000-0xf0efffff]
pci 0000:00:01.0: BAR 6: assigned [mem 0xf0d80000-0xf0d9ffff pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xf0e00000-0xf0e0ffff pref]
pci 0000:00:02.2: PCI bridge to [bus 01]
pci 0000:00:02.2: bridge window [io 0x3000-0x3fff]
pci 0000:00:02.2: bridge window [mem 0xf0e00000-0xf0efffff]
pci 0000:00:02.2: bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
pci 0000:00:02.3: PCI bridge to [bus 02]
pci 0000:00:02.3: bridge window [io 0x2000-0x2fff]
pci 0000:00:02.3: bridge window [mem 0xf0c00000-0xf0cfffff]
pci 0000:00:02.4: PCI bridge to [bus 03]
pci 0000:00:02.4: bridge window [mem 0xf0b00000-0xf0bfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 19 [mem 0xe0000000-0xf7ffffff window]
pci_bus 0000:00: resource 20 [mem 0xfc000000-0xfed3ffff window]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xf0e00000-0xf0efffff]
pci_bus 0000:01: resource 2 [mem 0xf0800000-0xf08fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xf0c00000-0xf0cfffff]
pci_bus 0000:03: resource 1 [mem 0xf0b00000-0xf0bfffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Video device with shadowed ROM
PCI: CLS mismatch (64 != 1020), using 64 bytes
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 35092K (ffff88003ddb6000 - ffff88003fffb000)
AMD-Vi: IOMMU performance counters supported
pci 0000:00:00.2: can't derive routing for PCI INT A
pci 0000:00:00.2: PCI INT A: no GSI
iommu: Adding device 0000:00:01.0 to group 0
iommu: Using direct mapping for device 0000:00:01.0
iommu: Adding device 0000:00:01.1 to group 0
iommu: Adding device 0000:00:02.0 to group 1
iommu: Adding device 0000:00:02.2 to group 1
iommu: Adding device 0000:00:02.3 to group 1
iommu: Adding device 0000:00:02.4 to group 1
iommu: Adding device 0000:00:03.0 to group 2
iommu: Adding device 0000:00:08.0 to group 3
iommu: Adding device 0000:00:09.0 to group 4
iommu: Adding device 0000:00:09.2 to group 4
iommu: Adding device 0000:00:10.0 to group 5
iommu: Adding device 0000:00:11.0 to group 6
iommu: Adding device 0000:00:12.0 to group 7
iommu: Adding device 0000:00:14.0 to group 8
iommu: Adding device 0000:00:14.3 to group 8
iommu: Adding device 0000:00:14.7 to group 8
iommu: Adding device 0000:00:18.0 to group 9
iommu: Adding device 0000:00:18.1 to group 9
iommu: Adding device 0000:00:18.2 to group 9
iommu: Adding device 0000:00:18.3 to group 9
iommu: Adding device 0000:00:18.4 to group 9
iommu: Adding device 0000:00:18.5 to group 9
iommu: Adding device 0000:01:00.0 to group 1
iommu: Adding device 0000:02:00.0 to group 1
iommu: Adding device 0000:03:00.0 to group 1
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Extended features: PPR NX GT IA GA PC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: Lazy IO/TLB flushing enabled
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000007ff)
perf: amd_iommu: Detected. (0 banks, 0 counters/bank)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1467539935.000:1): initialized
Initialise system trusted keyring
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Allocating IMA MOK and blacklist keyrings.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.2: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.3: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.4: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.4:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, mapped to 0xffffc90002000000, using 4224k, total 4224k
efifb: mode is 1366x768x32, linelength=5632, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 170x48
fb0: EFI VGA frame buffer device
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
Linux agpgart interface v0.103
ACPI: Battery Slot [BAT1] (battery present)
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.0: EHCI Host Controller
ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.0: debug port 2
ehci-pci 0000:00:12.0: irq 18, io mem 0xf0d6e000
ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-28-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000410
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-28-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:10.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.4.0-28-generic xhci-hcd
usb usb3: SerialNumber: 0000:00:10.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBC1,PNP0f13:MSE2] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0: patch_level=0x06006110
microcode: CPU1: patch_level=0x06006110
microcode: CPU2: patch_level=0x06006110
microcode: CPU3: patch_level=0x06006110
microcode: Microcode Update Driver: v2.01 , Peter Oruba
EFI: Loaded cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to '.system_keyring'
EFI: Loaded cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to '.system_keyring'
EFI: Loaded cert 'Toshiba Corporation Utility CA 2012: cc37e82804de6d8242718850b1af8d5f' linked to '.system_keyring'
EFI: Loaded cert ': 4941d90e94cb9a964b1397fa859f45c7' linked to '.system_keyring'
EFI: Loaded cert ': d786405226a5ddbb4fb3d04af46a3aa4' linked to '.system_keyring'
EFI: Loaded cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to '.system_keyring'
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 6ea974e07bd0b30541f4d838a3b7a8a80d5ca9af'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 8:625:979
memory memory26: hash matches
rtc_cmos 00:01: setting system clock to 2016-07-03 09:58:57 UTC (1467539937)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 1480K (ffffffff81f42000 - ffffffff820b4000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1860K (ffff88000182f000 - ffff880001a00000)
Freeing unused kernel memory: 168K (ffff880001dd6000 - ffff880001e00000)
random: systemd-udevd urandom read with 7 bits of entropy available
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
acpi device:00: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
wmi: Mapper loaded
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 227
r8169 0000:01:00.0 eth0: RTL8106e at 0xffffc900018dc000, 54:ab:3a:0d:0a:93, XID 04900000 IRQ 229
[drm] Initialized drm 1.1.0 20060810
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m1024@0xf0d6c000 port 0xf0d6c100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xf0d6c000 port 0xf0d6c180 irq 19
sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7906] (rev 1)
sdhci-pci 0000:00:14.7: Invalid first BAR. Aborting.
[drm] amdgpu kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
Found CRAT image with size=1440
Parsing CRAT table with 1 nodes
Found CU entry in CRAT table with proximity_domain=0 caps=0
CU CPU: cores=4 id_base=16
Found CU entry in CRAT table with proximity_domain=0 caps=0
CU GPU: simds=40 id_base=-2147483648
Found memory entry in CRAT table with proximity_domain=0
Found memory entry in CRAT table with proximity_domain=0
Found memory entry in CRAT table with proximity_domain=0
Found memory entry in CRAT table with proximity_domain=0
Found cache entry in CRAT table with processor_id=16
Found cache entry in CRAT table with processor_id=16
Found cache entry in CRAT table with processor_id=16
Found cache entry in CRAT table with processor_id=17
Found cache entry in CRAT table with processor_id=18
Found cache entry in CRAT table with processor_id=18
Found cache entry in CRAT table with processor_id=18
Found cache entry in CRAT table with processor_id=19
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Creating topology SYSFS entries
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (e0000000 420000) vs hw (e0000000 10000000)
fb: switching to amdgpudrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (CARRIZO 0x1002:0x9874 0x1179:0xF845 0xC5).
[drm] register mmio base: 0xF0D00000
[drm] register mmio size: 262144
[drm] doorbell mmio base: 0xF0000000
[drm] doorbell mmio size: 8388608
[drm] ACPI VFCT contains a BIOS for 00:01.0 1002:9874, size 64512
ATOM BIOS: 113
amdgpu 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
amdgpu 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 7971624 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 512M of VRAM memory ready
[drm] amdgpu: 1024M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x0000000000040000).
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
amdgpu 0000:00:01.0: amdgpu: using MSI.
[drm] amdgpu: irq initialized.
[drm] amdgpu: dpm initialized
[drm] amdgpu atom DIG backlight initialized
[drm] AMDGPU Display Connectors
[drm] Connector 0:
[drm] eDP-1
[drm] HPD1
[drm] DDC: 0x4868 0x4868 0x4869 0x4869 0x486a 0x486a 0x486b 0x486b
[drm] Encoders:
[drm] LCD1: INTERNAL_UNIPHY
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD2
[drm] DDC: 0x486c 0x486c 0x486d 0x486d 0x486e 0x486e 0x486f 0x486f
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
[drm] Connector 2:
[drm] HDMI-A-2
[drm] HPD3
[drm] DDC: 0x4870 0x4870 0x4871 0x4871 0x4872 0x4872 0x4873 0x4873
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY1
amdgpu 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000010, cpu addr 0xffff8803e67de010
amdgpu 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000020, cpu addr 0xffff8803e67de020
amdgpu 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000030, cpu addr 0xffff8803e67de030
amdgpu 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000040, cpu addr 0xffff8803e67de040
amdgpu 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000050, cpu addr 0xffff8803e67de050
amdgpu 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000020000060, cpu addr 0xffff8803e67de060
amdgpu 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000070, cpu addr 0xffff8803e67de070
amdgpu 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000080, cpu addr 0xffff8803e67de080
amdgpu 0000:00:01.0: fence driver on ring 8 use gpu addr 0x0000000020000090, cpu addr 0xffff8803e67de090
amdgpu 0000:00:01.0: fence driver on ring 9 use gpu addr 0x00000000200000a0, cpu addr 0xffff8803e67de0a0
amdgpu 0000:00:01.0: fence driver on ring 10 use gpu addr 0x00000000200000b0, cpu addr 0xffff8803e67de0b0
[drm] Found UVD firmware Version: 1.64 Family ID: 11
amdgpu 0000:00:01.0: fence driver on ring 11 use gpu addr 0x00000000002804c0, cpu addr 0xffffc9000343f4c0
[drm] Found VCE firmware Version: 50.17 Binary ID: 3
amdgpu 0000:00:01.0: fence driver on ring 12 use gpu addr 0x00000000200000d0, cpu addr 0xffff8803e67de0d0
amdgpu 0000:00:01.0: fence driver on ring 13 use gpu addr 0x00000000200000e0, cpu addr 0xffff8803e67de0e0
r8169 0000:01:00.0 enp1s0: renamed from eth0
[drm] ring test on 0 succeeded in 7 usecs
[drm] ring test on 1 succeeded in 8 usecs
[drm] ring test on 2 succeeded in 7 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 4 succeeded in 2 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] ring test on 6 succeeded in 2 usecs
[drm] ring test on 7 succeeded in 0 usecs
[drm] ring test on 8 succeeded in 1 usecs
[drm] ring test on 9 succeeded in 4 usecs
[drm] ring test on 10 succeeded in 4 usecs
[drm] ring test on 11 succeeded in 1 usecs
[drm] UVD initialized successfully.
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using xhci_hcd
usb 1-1: New USB device found, idVendor=0438, idProduct=7900
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
[drm] ring test on 12 succeeded in 16 usecs
[drm] ring test on 13 succeeded in 3 usecs
[drm] VCE initialized successfully.
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATAPI: TSSTcorp CDDVDW SU-208GB, TF01, max UDMA/100
ata1.00: ATA-9: KINGSTON SHSS37A240G, SAFM00.Y, max UDMA/133
ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA KINGSTON SHSS37A 00.Y PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
sda: sda1 sda2 sda3
ata2.00: configured for UDMA/100
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SU-208GB TF01 PQ: 0 ANSI: 5
psmouse serio2: elantech: assuming hardware version 4 (with firmware version 0x5e1f02)
psmouse serio2: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0d.
sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
psmouse serio2: elantech: Elan sample query result 06, 03, 86
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio2/input/input10
tsc: Refined TSC clocksource calibration: 1796.626 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19e5b66a75d, max_idle_ns: 440795268065 ns
usb 2-1: New USB device found, idVendor=04f2, idProduct=b446
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: TOSHIBA Web Camera - HD
usb 2-1: Manufacturer: SunplusIT Inc
[drm] fb mappable at 0xE059B000
[drm] vram apper at 0xE0000000
[drm] size 4325376
[drm] fb depth is 24
[drm] pitch is 5632
fbcon: amdgpudrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
amdgpu 0000:00:01.0: fb0: amdgpudrmfb frame buffer device
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded in 0 usecs
[drm] ib test on ring 6 succeeded in 0 usecs
[drm] ib test on ring 7 succeeded in 0 usecs
[drm] ib test on ring 8 succeeded in 0 usecs
[drm] ib test on ring 9 succeeded in 0 usecs
[drm] ib test on ring 10 succeeded in 0 usecs
[drm] ib test on ring 11 succeeded
[drm] ib test on ring 12 succeeded
kfd kfd: Allocated 3944480 bytes on gart for device(1002:9874)
amdkfd: adding doorbell packet type capability
kfd kfd: added device (1002:9874)
[drm] Initialized amdgpu 3.1.0 20150101 for 0000:00:01.0 on minor 0
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
clocksource: Switched to clocksource tsc
systemd[1]: Listening on udev Control Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Created slice System Slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Mounting Debug File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Journal Service...
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Reached target Remote File Systems.
systemd[1]: Started Braille Device Support.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Uncomplicated firewall.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Journal Service.
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
systemd-journald[254]: Received request to flush runtime journal from PID 1
toshiba_bluetooth: Toshiba ACPI Bluetooth device driver
tpm_crb MSFT0101:00: can't request region for resource [mem 0xdfb9a000-0xdfb9dfff]
tpm_crb: probe of MSFT0101:00 failed with error -16
toshiba_acpi: Toshiba Laptop ACPI Extras version 0.23
input: Toshiba input device as /devices/virtual/input/input13
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
EDAC MC: Ver: 3.0.0
MCE: In-kernel MCE decoding enabled.
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
kvm: disabled by bios
usb 2-2: new full-speed USB device number 3 using xhci_hcd
usb 2-2: New USB device found, idVendor=0930, idProduct=022f
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: Bluetooth Radio
usb 2-2: Manufacturer: Realtek
usb 2-2: SerialNumber: 00e04c000001
media: Linux media interface: v0.10
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - HD (04f2:b446)
input: TOSHIBA Web Camera - HD as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input14
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
snd_hda_intel 0000:00:01.1: Force to non-snoop mode
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input15
rtl8821ae: Using firmware rtlwifi/rtl8821aefw.bin
rtl8821ae: Using firmware rtlwifi/rtl8821aefw_wowlan.bin
toshiba_acpi: Supported laptop features: hotkeys touchpad usb-sleep-charge usb-rapid-charge special-function-keys panel-power-on
Adding 16212988k swap on /dev/sda3. Priority:-1 extents:1 across:16212988k SSFS
usb 2-2: USB disconnect, device number 3
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC233: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
kvm: disabled by bios
random: nonblocking pool is initialized
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
rtlwifi: rtlwifi: wireless switch is on
rtl8821ae 0000:02:00.0 wlp2s0: renamed from wlan0
input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:09.2/sound/card1/input16
input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:09.2/sound/card1/input17
usbcore: registered new interface driver btusb
audit: type=1400 audit(1467539943.110:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=660 comm="apparmor_parser"
audit: type=1400 audit(1467539943.110:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=660 comm="apparmor_parser"
audit: type=1400 audit(1467539943.110:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=660 comm="apparmor_parser"
audit: type=1400 audit(1467539943.110:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=660 comm="apparmor_parser"
audit: type=1400 audit(1467539943.110:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=659 comm="apparmor_parser"
audit: type=1400 audit(1467539943.110:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=659 comm="apparmor_parser"
audit: type=1400 audit(1467539943.114:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=665 comm="apparmor_parser"
audit: type=1400 audit(1467539943.114:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=667 comm="apparmor_parser"
audit: type=1400 audit(1467539943.118:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=672 comm="apparmor_parser"
audit: type=1400 audit(1467539943.122:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=674 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
r8169 0000:01:00.0 enp1s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with c4:ea:1d:08:5f:dd
wlp2s0: send auth to c4:ea:1d:08:5f:dd (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with c4:ea:1d:08:5f:dd (try 1/3)
wlp2s0: RX AssocResp from c4:ea:1d:08:5f:dd (capab=0x411 status=0 aid=2)
wlp2s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
perf interrupt took too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 50000