Xorg.0.log - no-C3

Return To no-C3 System Information

X.Org X Server 1.18.3
Release Date: 2016-04-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.10.0-229.14.1.el7.x86_64 x86_64 
Current Operating System: Linux clr-supernova-1 4.6.2-233.native #1 SMP Sun Jun 19 15:28:13 UTC 2016 x86_64
Build Date: 26 May 2016  06:30:24PM
 
Current version of pixman: 0.34.0
	Before reporting problems, check 
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 25 19:36:40 2016
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section.  Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) |   |-->Monitor ""
(==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Automatically adding GPU devices
(==) Max clients allowed: 256, resource mask: 0x1fffff
(WW) The directory "/usr/share/fonts/X11/misc/" does not exist.
	Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/X11/OTF/".
	Entry deleted from font path.
	(Run 'mkfontdir' on "/usr/share/fonts/X11/OTF/").
(WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/TTF/,
	/usr/share/fonts/X11/Type1/
(==) ModulePath set to "/usr/lib64/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x88a400
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 20.0
	X.Org XInput driver : 22.1
	X.Org Server Extension : 9.0
(II) xfree86: Adding drm device (/dev/dri/card0)
(--) PCI:*(0:0:2:0) 8086:162b:8086:2057 rev 9, Mem @ 0xa9000000/16777216, 0xb0000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "glx"
(II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.18.3, module version = 1.0.0
	ABI class: X.Org Server Extension, version 9.0
(==) AIGLX enabled
(==) Matched intel as autoconfigured driver 0
(==) Matched intel as autoconfigured driver 1
(==) Matched modesetting as autoconfigured driver 2
(==) Matched fbdev as autoconfigured driver 3
(==) Matched vesa as autoconfigured driver 4
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.18.3, module version = 2.99.917
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 20.0
(II) LoadModule: "modesetting"
(II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
(II) Module modesetting: vendor="X.Org Foundation"
	compiled for 1.18.3, module version = 1.18.3
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 20.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
	compiled for 1.18.3, module version = 0.4.4
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 20.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
	compiled for 1.18.3, module version = 2.3.4
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 20.0
(II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
(II) intel: Driver for Intel(R) HD Graphics: 2000-6000
(II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
(II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
(II) modesetting: Driver for Modesetting Kernel Drivers: kms
(II) FBDEV: driver for framebuffer: fbdev
(II) VESA: driver for VESA chipsets: vesa
(--) using VT number 2

(II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160229
(WW) Falling back to old probe method for modesetting
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
	compiled for 1.18.3, module version = 0.0.2
	ABI class: X.Org Video Driver, version 20.0
(WW) Falling back to old probe method for vesa
(--) intel(0): Integrated Graphics Chipset: Intel(R) Iris Graphics 6100
(--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads
(II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Output HDMI1 has no monitor section
(II) intel(0): Enabled output HDMI1
(II) intel(0): Output DP1 has no monitor section
(II) intel(0): Enabled output DP1
(II) intel(0): Output HDMI2 has no monitor section
(II) intel(0): Enabled output HDMI2
(--) intel(0): Using a maximum size of 256x256 for hardware cursors
(II) intel(0): Output VIRTUAL1 has no monitor section
(II) intel(0): Enabled output VIRTUAL1
(--) intel(0): Output HDMI1 using initial mode 1920x1080 on pipe 0
(==) intel(0): TearFree enabled
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "dri3"
(II) LoadModule: "dri3"
(II) Module "dri3" already built-in
(II) Loading sub module "dri2"
(II) LoadModule: "dri2"
(II) Module "dri2" already built-in
(II) Loading sub module "present"
(II) LoadModule: "present"
(II) Module "present" already built-in
(II) UnloadModule: "modesetting"
(II) Unloading modesetting
(II) UnloadModule: "fbdev"
(II) Unloading fbdev
(II) UnloadSubModule: "fbdevhw"
(II) Unloading fbdevhw
(II) UnloadModule: "vesa"
(II) Unloading vesa
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): SNA initialized with Broadwell (gen8) backend
(==) intel(0): Backing store enabled
(==) intel(0): Silken mouse enabled
(II) intel(0): HW Cursor enabled
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Display hotplug detection enabled
(II) intel(0): [DRI2] Setup complete
(II) intel(0): [DRI2]   DRI driver: i965
(II) intel(0): [DRI2]   VDPAU driver: va_gl
(II) intel(0): direct rendering: DRI2 DRI3 enabled
(II) intel(0): hardware support for Present enabled
(--) RandR disabled
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_ARB_create_context
(II) AIGLX: enabled GLX_ARB_create_context_profile
(II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
(II) AIGLX: enabled GLX_INTEL_swap_event
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
(II) AIGLX: enabled GLX_ARB_fbconfig_float
(II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: enabled GLX_ARB_create_context_robustness
(II) AIGLX: Loaded and initialized i965
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): switch to mode 1920x1080@60.0 on HDMI1 using pipe 0, position (0, 0), rotation normal, reflection none
(II) intel(0): Setting screen physical size to 508 x 285
(II) config/udev: Adding input device Power Button (/dev/input/event2)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.18.3, module version = 2.10.3
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 22.1
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event2"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
(**) Option "xkb_rules" "evdev"
(II) config/udev: Adding input device Video Bus (/dev/input/event3)
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Video Bus'
(**) Video Bus: always reports core events
(**) evdev: Video Bus: Device: "/dev/input/event3"
(--) evdev: Video Bus: Vendor 0 Product 0x6
(--) evdev: Video Bus: Found keys
(II) evdev: Video Bus: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3"
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
(**) Option "xkb_rules" "evdev"
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event1"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
(**) Option "xkb_rules" "evdev"
(II) config/udev: Adding input device Sleep Button (/dev/input/event0)
(**) Sleep Button: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Sleep Button'
(**) Sleep Button: always reports core events
(**) evdev: Sleep Button: Device: "/dev/input/event0"
(--) evdev: Sleep Button: Vendor 0 Product 0x3
(--) evdev: Sleep Button: Found keys
(II) evdev: Sleep Button: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
(**) Option "xkb_rules" "evdev"
(II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event6)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event4)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event5)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.

Return To no-C3 System Information