dmesg - y
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.0-327.el7.x86_64 (builder@kbuilder.dev.centos.org) (gcc version 4.8.3 20140911 (Red Hat 4.8.3-9) (GCC) ) #1 SMP Thu Nov 19 22:10:57 UTC 2015
Command line: BOOT_IMAGE=/vmlinuz-3.10.0-327.el7.x86_64 root=/dev/mapper/vg_root-lv_root ro crashkernel=auto rd.lvm.lv=vg_root/lv_root rd.lvm.lv=vg_root/lv_swap console=ttyS0,115200n8 LANG=en_US.UTF-8
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bfffdfff] usable
BIOS-e820: [mem 0x00000000bfffe000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Red Hat KVM, BIOS 0.5.1 01/01/2011
Hypervisor detected: KVM
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000C0000000 mask 3FFFC0000000 uncachable
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xbfffe max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f1f80-0x000f1f8f] mapped at [ffff8800000f1f80]
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01f32000, 0x01f32fff] PGTABLE
BRK [0x01f33000, 0x01f33fff] PGTABLE
BRK [0x01f34000, 0x01f34fff] PGTABLE
init_memory_mapping: [mem 0x23fe00000-0x23fffffff]
[mem 0x23fe00000-0x23fffffff] page 2M
BRK [0x01f35000, 0x01f35fff] PGTABLE
init_memory_mapping: [mem 0x23c000000-0x23fdfffff]
[mem 0x23c000000-0x23fdfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x23bffffff]
[mem 0x200000000-0x23bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbfffdfff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xbfdfffff] page 2M
[mem 0xbfe00000-0xbfffdfff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 2M
BRK [0x01f36000, 0x01f36fff] PGTABLE
BRK [0x01f37000, 0x01f37fff] PGTABLE
RAMDISK: [mem 0x35ac3000-0x36d59fff]
ACPI: RSDP 00000000000f1d30 00014 (v00 BOCHS )
ACPI: RSDT 00000000bffffbd6 00030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
ACPI: FACP 00000000bffff177 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
ACPI: DSDT 00000000bfffe040 01137 (v01 BXPC BXDSDT 00000001 INTL 20150619)
ACPI: FACS 00000000bfffe000 00040
ACPI: SSDT 00000000bffff1eb 0095B (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
ACPI: APIC 00000000bffffb46 00090 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
Initmem setup node 0 [mem 0x00000000-0x23fffffff]
NODE_DATA [mem 0x23ffd4000-0x23fffafff]
Reserving 161MB of memory at 688MB for crashkernel (System RAM: 8191MB)
kvm-clock: Using msrs 4b564d01 and 4b564d00
kvm-clock: cpu 0, msr 2:3ff84001, primary cpu clock
kvm-clock: using sched offset of 5825807302 cycles
[ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237600000-ffff88023f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x23fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xbfffdfff]
node 0: [mem 0x100000000-0x23fffffff]
On node 0 totalpages: 2097052
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 12224 pages used for memmap
DMA32 zone: 782334 pages, LIFO batch:31
Normal zone: 20480 pages used for memmap
Normal zone: 1310720 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x608
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbfffe000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xfeffbfff]
PM: Registered nosave memory: [mem 0xfeffc000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xfffbffff]
PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff]
e820: [mem 0xc0000000-0xfeffbfff] available for PCI devices
Booting paravirtualized kernel on KVM
setup_percpu: NR_CPUS:5120 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88023fc00000 s87168 r8192 d31616 u524288
pcpu-alloc: s87168 r8192 d31616 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
KVM setup async PF for cpu 0
kvm-stealtime: cpu 0, msr 23fc0d240
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064263
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.10.0-327.el7.x86_64 root=/dev/mapper/vg_root-lv_root ro crashkernel=auto rd.lvm.lv=vg_root/lv_root rd.lvm.lv=vg_root/lv_swap console=ttyS0,115200n8 LANG=en_US.UTF-8
PID hash table entries: 4096 (order: 3, 32768 bytes)
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
xsave: enabled xstate_bv 0x7, cntxt size 0x340
AGP: Checking aperture...
AGP: No AGP bridge found
Memory: 7990272k/9437184k available (6440k kernel code, 1048976k absent, 397936k reserved, 4266k data, 1620k init)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
NR_IRQS:327936 nr_irqs:456 0
Console: colour VGA+ 80x25
console [ttyS0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
tsc: Detected 2399.996 MHz processor
Calibrating delay loop (skipped) preset value.. 4799.99 BogoMIPS (lpj=2399996)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 4096
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
mce: CPU supports 10 MCE banks
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives: 28k freed
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 24585 entries in 97 pages
Enabling x2apic
Enabled x2apic
Switched APIC routing to physical x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel Xeon E312xx (Sandy Bridge) (fam: 06, model: 2a, stepping: 01)
TSC deadline timer enabled
Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only.
KVM setup paravirtual spinlock
NMI watchdog: disabled (cpu0): hardware events not enabled
kvm-clock: cpu 1, msr 2:3ff84041, secondary cpu clock
KVM setup async PF for cpu 1
kvm-stealtime: cpu 1, msr 23fc8d240
kvm-clock: cpu 2, msr 2:3ff84081, secondary cpu clock
KVM setup async PF for cpu 2
smpboot: Booting Node 0, Processors #1 #2 #3 OK
kvm-stealtime: cpu 2, msr 23fd0d240
kvm-clock: cpu 3, msr 2:3ff840c1, secondary cpu clock
Brought up 4 CPUs
KVM setup async PF for cpu 3
kvm-stealtime: cpu 3, msr 23fd8d240
smpboot: Total of 4 processors activated (19199.96 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.ima
EVM: security.capability
atomic64 test passed for x86-64 platform with CX8 and with SSE
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20130517/hwxface-571)
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
acpiphp: Slot [9] registered
acpiphp: Slot [10] registered
acpiphp: Slot [11] registered
acpiphp: Slot [12] registered
acpiphp: Slot [13] registered
acpiphp: Slot [14] registered
acpiphp: Slot [15] registered
acpiphp: Slot [16] registered
acpiphp: Slot [17] registered
acpiphp: Slot [18] registered
acpiphp: Slot [19] registered
acpiphp: Slot [20] registered
acpiphp: Slot [21] registered
acpiphp: Slot [22] registered
acpiphp: Slot [23] registered
acpiphp: Slot [24] registered
acpiphp: Slot [25] registered
acpiphp: Slot [26] registered
acpiphp: Slot [27] registered
acpiphp: Slot [28] registered
acpiphp: Slot [29] registered
acpiphp: Slot [30] registered
acpiphp: Slot [31] registered
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
pci 0000:00:01.1: reg 0x20: [io 0xc120-0xc12f]
pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
pci 0000:00:02.0: [1b36:0100] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf4000000-0xf7ffffff]
pci 0000:00:02.0: reg 0x14: [mem 0xf8000000-0xfbffffff]
pci 0000:00:02.0: reg 0x18: [mem 0xfc054000-0xfc055fff]
pci 0000:00:02.0: reg 0x1c: [io 0xc040-0xc05f]
pci 0000:00:02.0: reg 0x30: [mem 0xfc040000-0xfc04ffff pref]
pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
pci 0000:00:03.0: reg 0x10: [io 0xc060-0xc07f]
pci 0000:00:03.0: reg 0x14: [mem 0xfc056000-0xfc056fff]
pci 0000:00:03.0: reg 0x30: [mem 0xfc000000-0xfc03ffff pref]
pci 0000:00:04.0: [8086:2668] type 00 class 0x040300
pci 0000:00:04.0: reg 0x10: [mem 0xfc050000-0xfc053fff]
pci 0000:00:05.0: [1af4:1003] type 00 class 0x078000
pci 0000:00:05.0: reg 0x10: [io 0xc080-0xc09f]
pci 0000:00:05.0: reg 0x14: [mem 0xfc057000-0xfc057fff]
pci 0000:00:06.0: [8086:2934] type 00 class 0x0c0300
pci 0000:00:06.0: reg 0x20: [io 0xc0a0-0xc0bf]
pci 0000:00:06.1: [8086:2935] type 00 class 0x0c0300
pci 0000:00:06.1: reg 0x20: [io 0xc0c0-0xc0df]
pci 0000:00:06.2: [8086:2936] type 00 class 0x0c0300
pci 0000:00:06.2: reg 0x20: [io 0xc0e0-0xc0ff]
pci 0000:00:06.7: [8086:293a] type 00 class 0x0c0320
pci 0000:00:06.7: reg 0x10: [mem 0xfc058000-0xfc058fff]
pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000
pci 0000:00:07.0: reg 0x10: [io 0xc000-0xc03f]
pci 0000:00:07.0: reg 0x14: [mem 0xfc059000-0xfc059fff]
pci 0000:00:08.0: [1af4:1002] type 00 class 0x00ff00
pci 0000:00:08.0: reg 0x10: [io 0xc100-0xc11f]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
ACPI: Enabled 16 GPEs in block 00 to 0F
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbfffe000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource kvm-clock
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:03: [dma 2]
pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 5 devices
ACPI: bus type PNP unregistered
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Boot video device
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 19036k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbbffe000-0xbfffe000] (64MB) mapped at [ffff8800bbffe000-ffff8800bfffdfff]
microcode: CPU0 sig=0x206a1, pf=0x1, revision=0x1
microcode: CPU1 sig=0x206a1, pf=0x1, revision=0x1
microcode: CPU2 sig=0x206a1, pf=0x1, revision=0x1
microcode: CPU3 sig=0x206a1, pf=0x1, revision=0x1
microcode: Microcode Update Driver: v2.00 , Peter Oruba
sha1_ssse3: Using AVX optimized SHA-1 implementation
sha256_ssse3: Using AVX optimized SHA-256 implementation
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1466220736.556:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15643
Key type big_key registered
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 42
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:06.7: EHCI Host Controller
ehci-pci 0000:00:06.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:06.7: irq 10, io mem 0xfc058000
ehci-pci 0000:00:06.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.0-327.el7.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:06.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:06.0: UHCI Host Controller
uhci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:06.0: detected 2 ports
uhci_hcd 0000:00:06.0: irq 10, io base 0x0000c0a0
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.10.0-327.el7.x86_64 uhci_hcd
usb usb2: SerialNumber: 0000:00:06.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:06.1: UHCI Host Controller
uhci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:06.1: detected 2 ports
uhci_hcd 0000:00:06.1: irq 11, io base 0x0000c0c0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.10.0-327.el7.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:06.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:06.2: UHCI Host Controller
uhci_hcd 0000:00:06.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:06.2: detected 2 ports
uhci_hcd 0000:00:06.2: irq 11, io base 0x0000c0e0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.10.0-327.el7.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:06.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one day, 114 bytes nvram
cpuidle: using governor menu
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
Loaded X.509 cert 'CentOS Linux kernel signing key: 79ad886a113ca0223526336c0f825b8a94296ab3'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
IMA: No TPM chip found, activating TPM-bypass!
rtc_cmos 00:00: setting system clock to 2016-06-18 03:32:16 UTC (1466220736)
Freeing unused kernel memory: 1620k freed
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected virtualization kvm.
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Created slice -.slice.
systemd[1]: Starting -.slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting Local File Systems.
usb 1-1: new high-speed USB device number 2 using ehci-pci
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started dracut ask for additional cmdline parameters.
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Reached target Timers.
systemd[1]: Starting Timers.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
usb 1-1: New USB device found, idVendor=0627, idProduct=0001
usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
usb 1-1: Product: QEMU USB Tablet
usb 1-1: Manufacturer: QEMU
usb 1-1: SerialNumber: 42
systemd[1]: Reached target Sockets.
systemd[1]: Starting Sockets.
input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:06.7/usb1/1-1/1-1:1.0/input/input2
systemd[1]: Starting Create list of required static device nodes for the current kernel...
hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU QEMU USB Tablet] on usb-0000:00:06.7-1/input0
systemd[1]: Started Journal Service.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
virtio-pci 0000:00:03.0: virtio_pci: leaving for legacy driver
FDC 0 is a S82078B
libata version 3.00 loaded.
virtio-pci 0000:00:05.0: virtio_pci: leaving for legacy driver
[drm] Initialized drm 1.1.0 20060810
virtio-pci 0000:00:07.0: virtio_pci: leaving for legacy driver
virtio-pci 0000:00:08.0: virtio_pci: leaving for legacy driver
ata_piix 0000:00:01.1: version 2.13
scsi host0: ata_piix
virtio-pci 0000:00:03.0: irq 24 for MSI/MSI-X
virtio-pci 0000:00:03.0: irq 25 for MSI/MSI-X
virtio-pci 0000:00:03.0: irq 26 for MSI/MSI-X
scsi host1: ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15
virtio-pci 0000:00:07.0: irq 27 for MSI/MSI-X
virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
virtio-pci 0000:00:07.0: irq 29 for MSI/MSI-X
virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
vda: vda1 vda2
[drm] Device Version 0.0
[drm] Compression level 0 log level 0
[drm] Currently using mode #0, list at 0x488
[drm] 12286 io pages at offset 0x1000000
[drm] 16777216 byte draw area at offset 0x0
[drm] RAM header offset: 0x3ffe000
[drm] rom modes offset 0x488 for 128 modes
[TTM] Zone kernel: Available graphics memory: 4005478 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] qxl: 16M of VRAM memory size
[drm] qxl: 63M of IO pages memory ready (VRAM domain)
[drm] qxl: 64M of Surface memory size
[drm] main mem slot 1 [f4000000,3ffe000]
[drm] surface mem slot 2 [f8000000,4000000]
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
[drm] fb mappable at 0xF4000000, size 3145728
[drm] fb: depth 24, pitch 4096, width 1024, height 768
fbcon: qxldrmfb (fb0) is primary device
tsc: Refined TSC clocksource calibration: 2400.009 MHz
Console: switching to colour frame buffer device 128x48
qxl 0000:00:02.0: fb0: qxldrmfb frame buffer device
qxl 0000:00:02.0: registered panic notifier
[drm] Initialized qxl 0.1.0 20120117 for 0000:00:02.0 on minor 0
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[110]: Received SIGTERM from PID 1 (systemd).
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1466220740.535:2): selinux=0 auid=4294967295 ses=4294967295
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: Inserted module 'ip_tables'
EXT4-fs (dm-0): re-mounted. Opts: (null)
systemd-journald[486]: Received request to flush runtime journal from PID 1
piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
input: PC Speaker as /devices/platform/pcspkr/input/input4
ppdev: user-space parallel port driver
AES CTR mode by8 optimization enabled
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
alg: No test for crc32 (crc32-pclmul)
intel_rapl: no valid rapl domains found in package 0
snd_hda_intel 0000:00:04.0: irq 31 for MSI/MSI-X
Adding 4095996k swap on /dev/mapper/vg_root-lv_swap. Priority:-1 extents:1 across:4095996k FS
snd_hda_codec_generic hdaudioC0D0: autoconfig for ID 22: line_outs=1 (0x3/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_generic hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_generic hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_generic hdaudioC0D0: inputs:
snd_hda_codec_generic hdaudioC0D0: Line=0x5
EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: (null)
type=1305 audit(1466220741.314:3): audit_pid=621 old=0 auid=4294967295 ses=4294967295 res=1
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
Bridge firewalling registered
nr_pdflush_threads exported in /proc is scheduled for removal