dmesg - CPU-P9X79-E-WS
microcode: microcode updated early to revision 0x619, date = 2012-05-22
Linux version 4.6.2-3.g2a68ef0-default (geeko@buildhost) (gcc version 5.3.1 20160412 [gcc-5-branch revision 234894] (SUSE Linux) ) #1 SMP PREEMPT Fri Jun 10 08:12:44 UTC 2016 (2a68ef0)
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dc03afff] usable
BIOS-e820: [mem 0x00000000dc03b000-0x00000000dc320fff] reserved
BIOS-e820: [mem 0x00000000dc321000-0x00000000dc42efff] ACPI data
BIOS-e820: [mem 0x00000000dc42f000-0x00000000dc657fff] ACPI NVS
BIOS-e820: [mem 0x00000000dc658000-0x00000000dd6fdfff] reserved
BIOS-e820: [mem 0x00000000dd6fe000-0x00000000dd6fefff] usable
BIOS-e820: [mem 0x00000000dd6ff000-0x00000000dd784fff] ACPI NVS
BIOS-e820: [mem 0x00000000dd785000-0x00000000ddbc7fff] usable
BIOS-e820: [mem 0x00000000ddbc8000-0x00000000ddff3fff] reserved
BIOS-e820: [mem 0x00000000ddff4000-0x00000000ddffffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000089fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: System manufacturer System Product Name/P9X79-E WS, BIOS 1704 05/08/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x8a0000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask 3FF800000000 write-back
1 base 000800000000 mask 3FFF80000000 write-back
2 base 000880000000 mask 3FFFE0000000 write-back
3 base 0000DF000000 mask 3FFFFF000000 uncachable
4 base 0000E0000000 mask 3FFFE0000000 uncachable
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xdf000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xde000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd980-0x000fd98f] mapped at [ffff8800000fd980]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
BRK [0x0224b000, 0x0224bfff] PGTABLE
BRK [0x0224c000, 0x0224cfff] PGTABLE
BRK [0x0224d000, 0x0224dfff] PGTABLE
BRK [0x0224e000, 0x0224efff] PGTABLE
BRK [0x0224f000, 0x0224ffff] PGTABLE
BRK [0x02250000, 0x02250fff] PGTABLE
RAMDISK: [mem 0x36bd3000-0x375e0fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DC357070 00005C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DC361870 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000DC357168 00A702 (v02 ALASKA A M I 00000016 INTL 20051117)
ACPI: FACS 0x00000000DC64F080 000040
ACPI: APIC 0x00000000DC361980 000138 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DC361AB8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000DC361B00 00003C (v01 ALASKA OEMMCFG. 01072009 MSFT 00000097)
ACPI: HPET 0x00000000DC361B40 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: BGRT 0x00000000DC42ECF8 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DC361BD0 0CD128 (v02 INTEL CpuPm 00004000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000089fffffff]
NODE_DATA(0) allocated [mem 0x89ffe6000-0x89fffcfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000089fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x00000000dc03afff]
node 0: [mem 0x00000000dd6fe000-0x00000000dd6fefff]
node 0: [mem 0x00000000dd785000-0x00000000ddbc7fff]
node 0: [mem 0x00000000ddff4000-0x00000000ddffffff]
node 0: [mem 0x0000000100000000-0x000000089fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000089fffffff]
On node 0 totalpages: 8897575
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 14035 pages used for memmap
DMA32 zone: 898187 pages, LIFO batch:31
Normal zone: 124928 pages used for memmap
Normal zone: 7995392 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdc03b000-0xdc320fff]
PM: Registered nosave memory: [mem 0xdc321000-0xdc42efff]
PM: Registered nosave memory: [mem 0xdc42f000-0xdc657fff]
PM: Registered nosave memory: [mem 0xdc658000-0xdd6fdfff]
PM: Registered nosave memory: [mem 0xdd6ff000-0xdd784fff]
PM: Registered nosave memory: [mem 0xddbc8000-0xddff3fff]
PM: Registered nosave memory: [mem 0xde000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xf0000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 34 pages/cpu @ffff88087d200000 s99672 r8192 d31400 u262144
pcpu-alloc: s99672 r8192 d31400 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Built 1 zonelists in Node order, mobility grouping on. Total pages: 8758527
Policy zone: Normal
log_buf_len individual max cpu contribution: 32768 bytes
log_buf_len total cpu_extra contributions: 491520 bytes
log_buf_len min size: 262144 bytes
log_buf_len: 1048576 bytes
early log buf free: 250900(95%)
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 5611180K/35590300K available (6852K kernel code, 1180K rwdata, 4988K rodata, 1632K init, 1540K bss, 655812K reserved, 0K cma-reserved)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=16
NR_IRQS:33024 nr_irqs:960 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2756.028 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5512.05 BogoMIPS (lpj=11024112)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160108
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 20 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff820c1000 - ffffffff820c8000)
ftrace: allocating 27416 entries in 108 pages
smpboot: Max logical packages: 2
smpboot: APIC(0) Converting physical 0 to logical package 0
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2670 0 @ 2.60GHz (family: 0x6, model: 0x2d, stepping: 0x6)
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
x86: Booted up 1 node, 16 CPUs
smpboot: Total of 16 processors activated (88208.05 BogoMIPS)
node 0 initialised, 7330827 pages in 156ms
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xdc42f000-0xdc657fff] (2265088 bytes)
PM: Registering ACPI NVS region [mem 0xdd6ff000-0xdd784fff] (548864 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 3:57:30, date: 06/15/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfbffffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfbc09000-0xfbc09fff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfbc08000-0xfbc0800f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfbc07000-0xfbc073ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfbc00000-0xfbc03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1d14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1d16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:1d18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:1d1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:1d1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfbc06000-0xfbc063ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfbc05000-0xfbc057ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfbc04000-0xfbc040ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:01.0: PCI bridge to [bus 05]
pci 0000:06:00.0: [10b5:8747] type 01 class 0x060400
pci 0000:06:00.0: reg 0x10: [mem 0xfbb00000-0xfbb3ffff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PCI bridge to [bus 06-09]
pci 0000:00:02.0: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:07:08.0: [10b5:8747] type 01 class 0x060400
pci 0000:07:08.0: Max Payload Size set to 256 (was 128, max 2048)
pci 0000:07:08.0: PME# supported from D0 D3hot D3cold
pci 0000:07:10.0: [10b5:8747] type 01 class 0x060400
pci 0000:07:10.0: Max Payload Size set to 256 (was 128, max 2048)
pci 0000:07:10.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PCI bridge to [bus 07-09]
pci 0000:07:08.0: PCI bridge to [bus 09]
pci 0000:07:10.0: PCI bridge to [bus 08]
pci 0000:01:00.0: [10b5:8747] type 01 class 0x060400
pci 0000:01:00.0: reg 0x10: [mem 0xfb100000-0xfb13ffff]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PCI bridge to [bus 01-04]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb1fffff]
pci 0000:00:03.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci 0000:02:08.0: [10b5:8747] type 01 class 0x060400
pci 0000:02:08.0: Max Payload Size set to 256 (was 128, max 2048)
pci 0000:02:08.0: PME# supported from D0 D3hot D3cold
pci 0000:02:10.0: [10b5:8747] type 01 class 0x060400
pci 0000:02:10.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PCI bridge to [bus 02-04]
pci 0000:01:00.0: bridge window [io 0xe000-0xefff]
pci 0000:01:00.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:01:00.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci 0000:02:08.0: PCI bridge to [bus 04]
pci 0000:03:00.0: [10de:1287] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:03:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:03:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit pref]
pci 0000:03:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:03:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:03:00.1: [10de:0e0f] type 00 class 0x040300
pci 0000:03:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
pci 0000:02:10.0: PCI bridge to [bus 03]
pci 0000:02:10.0: bridge window [io 0xe000-0xefff]
pci 0000:02:10.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:02:10.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci 0000:00:11.0: PCI bridge to [bus 0a]
pci 0000:0b:00.0: [8086:1533] type 00 class 0x020000
pci 0000:0b:00.0: reg 0x10: [mem 0xfb400000-0xfb4fffff]
pci 0000:0b:00.0: reg 0x18: [io 0xd000-0xd01f]
pci 0000:0b:00.0: reg 0x1c: [mem 0xfb500000-0xfb503fff]
pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 0b]
pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: bridge window [mem 0xfb400000-0xfb5fffff]
pci 0000:0c:00.0: [8086:1533] type 00 class 0x020000
pci 0000:0c:00.0: reg 0x10: [mem 0xfb200000-0xfb2fffff]
pci 0000:0c:00.0: reg 0x18: [io 0xc000-0xc01f]
pci 0000:0c:00.0: reg 0x1c: [mem 0xfb300000-0xfb303fff]
pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 0c]
pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb3fffff]
pci 0000:0d:00.0: [1106:3403] type 00 class 0x0c0010
pci 0000:0d:00.0: reg 0x10: [mem 0xfba00000-0xfba007ff 64bit]
pci 0000:0d:00.0: reg 0x18: [io 0xb000-0xb0ff]
pci 0000:0d:00.0: supports D2
pci 0000:0d:00.0: PME# supported from D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 0d]
pci 0000:00:1c.2: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.2: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:0e:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:0e:00.0: reg 0x10: [io 0xa050-0xa057]
pci 0000:0e:00.0: reg 0x14: [io 0xa040-0xa043]
pci 0000:0e:00.0: reg 0x18: [io 0xa030-0xa037]
pci 0000:0e:00.0: reg 0x1c: [io 0xa020-0xa023]
pci 0000:0e:00.0: reg 0x20: [io 0xa000-0xa01f]
pci 0000:0e:00.0: reg 0x24: [mem 0xfb900000-0xfb9001ff]
pci 0000:00:1c.3: PCI bridge to [bus 0e]
pci 0000:00:1c.3: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.3: bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:0f:00.0: [1b4b:9230] type 00 class 0x010601
pci 0000:0f:00.0: reg 0x10: [io 0x9050-0x9057]
pci 0000:0f:00.0: reg 0x14: [io 0x9040-0x9043]
pci 0000:0f:00.0: reg 0x18: [io 0x9030-0x9037]
pci 0000:0f:00.0: reg 0x1c: [io 0x9020-0x9023]
pci 0000:0f:00.0: reg 0x20: [io 0x9000-0x901f]
pci 0000:0f:00.0: reg 0x24: [mem 0xfb810000-0xfb8107ff]
pci 0000:0f:00.0: reg 0x30: [mem 0xfb800000-0xfb80ffff pref]
pci 0000:0f:00.0: PME# supported from D3hot
pci 0000:00:1c.4: PCI bridge to [bus 0f]
pci 0000:00:1c.4: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.4: bridge window [mem 0xfb800000-0xfb8fffff]
pci 0000:10:00.0: [1b21:1142] type 00 class 0x0c0330
pci 0000:10:00.0: reg 0x10: [mem 0xfb700000-0xfb707fff 64bit]
pci 0000:10:00.0: PME# supported from D3cold
pci 0000:00:1c.6: PCI bridge to [bus 10]
pci 0000:00:1c.6: bridge window [mem 0xfb700000-0xfb7fffff]
pci 0000:11:00.0: [1b21:1142] type 00 class 0x0c0330
pci 0000:11:00.0: reg 0x10: [mem 0xfb600000-0xfb607fff 64bit]
pci 0000:11:00.0: PME# supported from D3cold
pci 0000:00:1c.7: PCI bridge to [bus 11]
pci 0000:00:1c.7: bridge window [mem 0xfb600000-0xfb6fffff]
pci 0000:00:1e.0: PCI bridge to [bus 12] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xfbffffff window] (subtractive decode)
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:ff:08.3: [8086:3c83] type 00 class 0x088000
pci 0000:ff:08.4: [8086:3c84] type 00 class 0x088000
pci 0000:ff:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:ff:09.3: [8086:3c93] type 00 class 0x088000
pci 0000:ff:09.4: [8086:3c94] type 00 class 0x088000
pci 0000:ff:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:ff:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:ff:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:ff:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:ff:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:ff:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.2: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.3: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:ff:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:ff:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:ff:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:ff:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:ff:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:ff:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:ff:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:ff:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:ff:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:ff:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:ff:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:ff:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:ff:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:ff:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:ff:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:ff:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:ff:13.6: [8086:3c45] type 00 class 0x088000
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: Enabled 2 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:03:00.0
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
e820: reserve RAM buffer [mem 0xdc03b000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdd6ff000-0xdfffffff]
e820: reserve RAM buffer [mem 0xddbc8000-0xdfffffff]
e820: reserve RAM buffer [mem 0xde000000-0xdfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed45000-0xfedfffff] has been reserved
system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0290-0x029f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:05: [io 0x0400-0x0453] could not be reserved
system 00:05: [io 0x0458-0x047f] has been reserved
system 00:05: [io 0x1180-0x119f] has been reserved
system 00:05: [io 0x0500-0x057f] has been reserved
system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:06: [io 0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 05]
pci 0000:07:08.0: PCI bridge to [bus 09]
pci 0000:07:10.0: PCI bridge to [bus 08]
pci 0000:06:00.0: PCI bridge to [bus 07-09]
pci 0000:00:02.0: PCI bridge to [bus 06-09]
pci 0000:00:02.0: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:02:08.0: PCI bridge to [bus 04]
pci 0000:02:10.0: PCI bridge to [bus 03]
pci 0000:02:10.0: bridge window [io 0xe000-0xefff]
pci 0000:02:10.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:02:10.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci 0000:01:00.0: PCI bridge to [bus 02-04]
pci 0000:01:00.0: bridge window [io 0xe000-0xefff]
pci 0000:01:00.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:01:00.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 01-04]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb1fffff]
pci 0000:00:03.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci 0000:00:11.0: PCI bridge to [bus 0a]
pci 0000:00:1c.0: PCI bridge to [bus 0b]
pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: bridge window [mem 0xfb400000-0xfb5fffff]
pci 0000:00:1c.1: PCI bridge to [bus 0c]
pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb3fffff]
pci 0000:00:1c.2: PCI bridge to [bus 0d]
pci 0000:00:1c.2: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.2: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:00:1c.3: PCI bridge to [bus 0e]
pci 0000:00:1c.3: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.3: bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:00:1c.4: PCI bridge to [bus 0f]
pci 0000:00:1c.4: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.4: bridge window [mem 0xfb800000-0xfb8fffff]
pci 0000:00:1c.6: PCI bridge to [bus 10]
pci 0000:00:1c.6: bridge window [mem 0xfb700000-0xfb7fffff]
pci 0000:00:1c.7: PCI bridge to [bus 11]
pci 0000:00:1c.7: bridge window [mem 0xfb600000-0xfb6fffff]
pci 0000:00:1e.0: PCI bridge to [bus 12]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfbffffff window]
pci_bus 0000:06: resource 1 [mem 0xfbb00000-0xfbbfffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfb1fffff]
pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf9ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf9ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf9ffffff 64bit pref]
pci_bus 0000:0b: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:0b: resource 1 [mem 0xfb400000-0xfb5fffff]
pci_bus 0000:0c: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:0c: resource 1 [mem 0xfb200000-0xfb3fffff]
pci_bus 0000:0d: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:0d: resource 1 [mem 0xfba00000-0xfbafffff]
pci_bus 0000:0e: resource 0 [io 0xa000-0xafff]
pci_bus 0000:0e: resource 1 [mem 0xfb900000-0xfb9fffff]
pci_bus 0000:0f: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:0f: resource 1 [mem 0xfb800000-0xfb8fffff]
pci_bus 0000:10: resource 1 [mem 0xfb700000-0xfb7fffff]
pci_bus 0000:11: resource 1 [mem 0xfb600000-0xfb6fffff]
pci_bus 0000:12: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:12: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:12: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:12: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:12: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:12: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:12: resource 10 [mem 0xe0000000-0xfbffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 32768 (order: 8, 1048576 bytes)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 10296K (ffff880036bd3000 - ffff8800375e1000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd803b000-0xdc03b000] (64MB) mapped at [ffff8800d803b000-ffff8800dc03afff]
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain dram 2^-16 Joules
Scanning for low memory corruption every 60 seconds
futex hash table entries: 4096 (order: 6, 262144 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1465963051.248:1): initialized
workingset: timestamp_bits=34 max_order=24 bucket_order=0
zbud: loaded
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90007000000, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4.1 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x2f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xfbc05000 port 0xfbc05100 irq 33
ata2: SATA max UDMA/133 abar m2048@0xfbc05000 port 0xfbc05180 irq 33
ata3: SATA max UDMA/133 abar m2048@0xfbc05000 port 0xfbc05200 irq 33
ata4: SATA max UDMA/133 abar m2048@0xfbc05000 port 0xfbc05280 irq 33
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xfbc05000 port 0xfbc05380 irq 33
ahci 0000:0e:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:0e:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:0e:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc
scsi host6: ahci
scsi host7: ahci
ata7: SATA max UDMA/133 abar m512@0xfb900000 port 0xfb900100 irq 34
ata8: SATA max UDMA/133 abar m512@0xfb900000 port 0xfb900180 irq 34
ahci 0000:0f:00.0: controller can do FBS, turning on CAP_FBS
ahci 0000:0f:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:0f:00.0: flags: 64bit ncq fbs pio
scsi host8: ahci
scsi host9: ahci
scsi host10: ahci
scsi host11: ahci
scsi host12: ahci
scsi host13: ahci
scsi host14: ahci
scsi host15: ahci
ata9: SATA max UDMA/133 abar m2048@0xfb810000 port 0xfb810100 irq 35
ata10: SATA max UDMA/133 abar m2048@0xfb810000 port 0xfb810180 irq 35
ata11: SATA max UDMA/133 abar m2048@0xfb810000 port 0xfb810200 irq 35
ata12: SATA max UDMA/133 abar m2048@0xfb810000 port 0xfb810280 irq 35
ata13: SATA max UDMA/133 abar m2048@0xfb810000 port 0xfb810300 irq 35
ata14: SATA max UDMA/133 abar m2048@0xfb810000 port 0xfb810380 irq 35
ata15: SATA max UDMA/133 abar m2048@0xfb810000 port 0xfb810400 irq 35
ata16: SATA max UDMA/133 abar m2048@0xfb810000 port 0xfb810480 irq 35
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
NET: Registered protocol family 10
microcode: CPU0 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU1 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU2 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU3 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU4 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU5 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU6 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU7 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU8 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU9 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU10 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU11 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU12 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU13 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU14 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU15 sig=0x206d6, pf=0x1, revision=0x619
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
zswap: loaded using pool lzo/zbud
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
Magic number: 4:883:967
memory memory18: hash matches
rtc_cmos 00:02: setting system clock to 2016-06-15 03:57:32 UTC (1465963052)
PM: Checking hibernation image partition /dev/sde1
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata3.00: ATA-8: WDC WD10EZRX-00A8LB0, 01.01A01, max UDMA/133
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
ata6.00: ATA-8: WDC WD7500BPVT-22HXZT3, 01.01A01, max UDMA/133
ata6.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
ata2.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ATAPI: HL-DT-ST BD-RE BH10LS30, 1.00, max UDMA/133
ata6.00: configured for UDMA/133
ata1.00: configured for UDMA/133
ata11: SATA link down (SStatus 0 SControl 300)
ata2.00: configured for UDMA/133
ata15: SATA link down (SStatus 0 SControl 300)
ata14: SATA link down (SStatus 0 SControl 300)
ata16: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata12: SATA link down (SStatus 0 SControl 300)
ata13: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: CD-ROM HL-DT-ST BD-RE BH10LS30 1.00 PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD154UI 1118 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
scsi 2:0:0:0: Direct-Access ATA WDC WD10EZRX-00A 1A01 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 2:0:0:0: [sdb] 4096-byte physical blocks
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata16.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
sdb: sdb1 sdb2
ata16.00: configured for UDMA/66
sd 2:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2 sda3
sd 1:0:0:0: [sda] Attached SCSI disk
ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata9.00: ATA-7: MARVELL Raid VD, MV.R00-0, max UDMA7
ata9.00: 3906865280 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata9.00: configured for UDMA/133
tsc: Refined TSC clocksource calibration: 2755.965 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27b9c27dbc8, max_idle_ns: 440795218251 ns
ata4.00: ATA-8: ST9320325AS, 0001SDM1, max UDMA/133
ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA ST9320325AS SDM1 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 5:0:0:0: Direct-Access ATA WDC WD7500BPVT-2 1A01 PQ: 0 ANSI: 5
sd 5:0:0:0: [sdd] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
sd 5:0:0:0: [sdd] 4096-byte physical blocks
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 3:0:0:0: [sdc] Attached SCSI disk
ata8: SATA link down (SStatus 0 SControl 300)
scsi 8:0:0:0: Direct-Access ATA MARVELL Raid VD 00-0 PQ: 0 ANSI: 5
sd 8:0:0:0: [sde] 3906865280 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 8:0:0:0: [sde] Write Protect is off
sd 8:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 15:0:0:0: Processor Marvell Console 1.01 PQ: 0 ANSI: 5
sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12
sd 8:0:0:0: [sde] Attached SCSI disk
clocksource: Switched to clocksource tsc
sdd: sdd1 sdd2
sd 5:0:0:0: [sdd] Attached SCSI disk
PM: Hibernation image partition 8:65 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1632K (ffffffff81f29000 - ffffffff820c1000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1324K (ffff8800016b5000 - ffff880001800000)
Freeing unused kernel memory: 1156K (ffff880001cdf000 - ffff880001e00000)
random: systemd urandom read with 76 bits of entropy available
systemd[1]: systemd 228 running in system mode. (+PAM +AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Listening on Journal Socket.
systemd[1]: Reached target Timers.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Created slice system-systemd\x2dhibernate\x2dresume.slice.
systemd[1]: Reached target Slices.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Reached target Sockets.
PPP generic driver version 2.4.2
systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm.
systemd[1]: Starting Journal Service...
systemd[1]: Reached target Swap.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Started dracut cmdline hook.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Started udev Kernel Device Manager.
systemd[1]: Starting dracut pre-trigger hook...
systemd[1]: Started dracut pre-trigger hook.
scsi 0:0:0:0: Attached scsi generic sg0 type 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 5:0:0:0: Attached scsi generic sg4 type 0
sd 8:0:0:0: Attached scsi generic sg5 type 0
scsi 15:0:0:0: Attached scsi generic sg6 type 3
systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
systemd[1]: Failed to start Load Kernel Modules.
systemd[1]: systemd-modules-load.service: Unit entered failed state.
audit: type=1130 audit(1465963055.701:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Apply Kernel Variables.
audit: type=1130 audit(1465963055.705:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Started Journal Service.
audit: type=1130 audit(1465963055.725:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1465963055.737:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
wmi: Mapper loaded
audit: type=1130 audit(1465963055.793:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 23, io mem 0xfbc07000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.6.2-3.g2a68ef0-default ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:10:00.0: xHCI Host Controller
xhci_hcd 0000:10:00.0: new USB bus registered, assigned bus number 2
sr 0:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
audit: type=1130 audit(1465963055.829:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
firewire_ohci 0000:0d:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x10
random: nonblocking pool is initialized
xhci_hcd 0000:10:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x00000010
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.6.2-3.g2a68ef0-default xhci-hcd
usb usb2: SerialNumber: 0000:10:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:10:00.0: xHCI Host Controller
xhci_hcd 0000:10:00.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
ehci-pci 0000:00:1d.0: debug port 2
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.6.2-3.g2a68ef0-default xhci-hcd
usb usb3: SerialNumber: 0000:10:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbc06000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 4.6.2-3.g2a68ef0-default ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:11:00.0: xHCI Host Controller
xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:11:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x00000010
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.6.2-3.g2a68ef0-default xhci-hcd
usb usb5: SerialNumber: 0000:11:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:11:00.0: xHCI Host Controller
xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.6.2-3.g2a68ef0-default xhci-hcd
usb usb6: SerialNumber: 0000:11:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 4-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
raid6: sse2x1 gen() 7387 MB/s
usb 4-1: New USB device found, idVendor=8087, idProduct=0024
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 8 ports detected
raid6: sse2x1 xor() 5592 MB/s
firewire_core 0000:0d:00.0: created device fw0: GUID 001e8c000072a42d, S400
raid6: sse2x2 gen() 9152 MB/s
raid6: sse2x2 xor() 6666 MB/s
raid6: sse2x4 gen() 10684 MB/s
usb 4-1.1: new full-speed USB device number 3 using ehci-pci
raid6: sse2x4 xor() 5024 MB/s
raid6: using algorithm sse2x4 gen() 10684 MB/s
raid6: .... xor() 5024 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 18212.000 MB/sec
BTRFS: using crc32c-intel for crc32c
Btrfs loaded, assert=on
BTRFS: device fsid 639c8f04-b8af-4a81-8080-425932bc321b devid 1 transid 5054 /dev/sdb2
usb 4-1.1: New USB device found, idVendor=046d, idProduct=c534
usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1.1: Product: USB Receiver
usb 4-1.1: Manufacturer: Logitech
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.0/0003:046D:C534.0001/input/input5
hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.1/0003:046D:C534.0002/input/input6
usb 4-1.2: new full-speed USB device number 4 using ehci-pci
PM: Starting manual resume from disk
PM: Hibernation image partition 8:65 present
PM: Looking for hibernation image.
hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input1
usb 4-1.2: New USB device found, idVendor=046d, idProduct=c52b
usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1.2: Product: USB Receiver
usb 4-1.2: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input2
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
audit: type=1130 audit(1465963056.889:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hibernate-resume@dev-sde1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1465963056.889:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hibernate-resume@dev-sde1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
BTRFS: device fsid 3e9c357a-ed84-4383-8a15-4bf25f2959f0 devid 1 transid 45 /dev/sde4
BTRFS: device fsid 32a9450a-eb2a-47ab-9e68-555993163543 devid 1 transid 38 /dev/sde8
usb 4-1.4: new full-speed USB device number 5 using ehci-pci
BTRFS: device fsid 0371330e-1a1f-4967-9bf0-0d37d71c757e devid 1 transid 90 /dev/sde6
BTRFS: device fsid 026a6831-ee7c-4371-8c6a-379cd3fec07b devid 1 transid 999 /dev/sde5
BTRFS: device fsid 8a0bef3b-ea69-477c-a32d-4622cccd8840 devid 1 transid 408 /dev/sde9
BTRFS: device fsid 32215e26-d3db-44ee-bf5e-0f896e5dd52f devid 1 transid 14713 /dev/sde3
input: Logitech K350 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.2/0003:046D:C52B.0005/0003:046D:200A.0006/input/input7
logitech-hidpp-device 0003:046D:200A.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech K350] on usb-0000:00:1d.0-1.2:1
audit: type=1130 audit(1465963057.037:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
BTRFS info (device sde3): disk space caching is enabled
BTRFS: has skinny extents
usb 4-1.4: New USB device found, idVendor=08e6, idProduct=3437
usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-1.4: Product: USB SmartCard Reader
usb 4-1.4: Manufacturer: Gemalto
usb 4-1.4: SerialNumber: A77EA692
usb 4-1.7: new high-speed USB device number 6 using ehci-pci
usb 4-1.7: New USB device found, idVendor=04b8, idProduct=08c4
usb 4-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-1.7: Product: EPSON WF-2630 Series
usb 4-1.7: Manufacturer: EPSON
usb 4-1.7: SerialNumber: 554D43593135363467
usb-storage 4-1.7:1.2: USB Mass Storage device detected
scsi host16: usb-storage 4-1.7:1.2
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
audit: type=1130 audit(1465963057.553:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1465963057.553:12): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1465963057.557:13): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1465963057.557:14): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1465963057.557:15): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1465963057.557:16): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1465963057.561:17): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd-journald[259]: Received SIGTERM from PID 1 (systemd).
scsi 16:0:0:0: Direct-Access EPSON Storage 1.00 PQ: 0 ANSI: 2
sd 16:0:0:0: Attached scsi generic sg7 type 0
sd 16:0:0:0: [sdf] Attached SCSI removable disk
PPP MPPE Compression module registered
BTRFS info (device sde3): disk space caching is enabled
ip6_tables: (C) 2000-2006 Netfilter Core Team
audit_printk_skb: 105 callbacks suppressed
audit: type=1400 audit(1465963062.273:53): apparmor="STATUS" operation="profile_load" name="/{usr/,}bin/ping" pid=613 comm="apparmor_parser"
audit: type=1300 audit(1465963062.273:53): arch=c000003e syscall=1 success=yes exit=24905 a0=4 a1=263a820 a2=6149 a3=59 items=0 ppid=550 pid=613 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="apparmor_parser" exe="/sbin/apparmor_parser" key=(null)
audit: type=1327 audit(1465963062.273:53): proctitle=2F7362696E2F61707061726D6F725F706172736572002D492F6574632F61707061726D6F722E64002D2D616464002F6574632F61707061726D6F722E642F62696E2E70696E67
audit: type=1325 audit(1465963062.313:54): table=filter family=10 entries=0
audit: type=1300 audit(1465963062.313:54): arch=c000003e syscall=313 success=yes exit=0 a0=0 a1=41a258 a2=0 a3=0 items=0 ppid=195 pid=615 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/usr/bin/kmod" key=(null)
audit: type=1327 audit(1465963062.313:54): proctitle=2F7362696E2F6D6F6470726F6265002D71002D2D006970367461626C655F66696C746572
audit: type=1400 audit(1465963062.317:55): apparmor="STATUS" operation="profile_load" name="klogd" pid=622 comm="apparmor_parser"
audit: type=1300 audit(1465963062.317:55): arch=c000003e syscall=1 success=yes exit=15009 a0=4 a1=1327490 a2=3aa1 a3=59 items=0 ppid=550 pid=622 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="apparmor_parser" exe="/sbin/apparmor_parser" key=(null)
audit: type=1327 audit(1465963062.317:55): proctitle=2F7362696E2F61707061726D6F725F706172736572002D492F6574632F61707061726D6F722E64002D2D616464002F6574632F61707061726D6F722E642F7362696E2E6B6C6F6764
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
audit: type=1400 audit(1465963062.501:56): apparmor="STATUS" operation="profile_load" name="syslog-ng" pid=627 comm="apparmor_parser"
ip_tables: (C) 2000-2006 Netfilter Core Team
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
EDAC MC: Ver: 3.0.0
input: PC Speaker as /devices/platform/pcspkr/input/input8
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
Adding 71303164k swap on /dev/sde1. Priority:-1 extents:1 across:71303164k FS
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Patsburg TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input9
asus_wmi: Number of fans: 1
[drm] Initialized drm 1.1.0 20060810
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
nvidia-nvlink: Nvlink Core is being initialized, major device number 243
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 367.27 Thu Jun 9 18:53:27 PDT 2016
dca service started, version 1.12.1
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 367.27 Thu Jun 9 18:24:10 PDT 2016
[drm] [nvidia-drm] [GPU ID 0x00000300] Loading driver
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
pps pps0: new PPS source ptp0
igb 0000:0b:00.0: added PHC on eth0
igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:0b:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 54:a0:50:87:40:c3
igb 0000:0b:00.0: eth0: PBA No: 000500-000
igb 0000:0b:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
pps pps1: new PPS source ptp1
igb 0000:0c:00.0: added PHC on eth1
igb 0000:0c:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:0c:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 54:a0:50:87:40:c4
igb 0000:0c:00.0: eth1: PBA No: 000500-000
igb 0000:0c:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
igb 0000:0b:00.0 enp11s0: renamed from eth0
igb 0000:0c:00.0 enp12s0: renamed from eth1
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
usblp 4-1.7:1.1: usblp0: USB Bidirectional printer dev 6 if 1 alt 0 proto 2 vid 0x04B8 pid 0x08C4
usbcore: registered new interface driver usblp
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
audit_printk_skb: 474 callbacks suppressed
audit: type=1130 audit(1465963067.293:111): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1465963067.593:112): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-activation-early comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1465963067.593:113): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-activation-early comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1465963067.657:114): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1465963067.657:115): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
BTRFS info (device sde6): disk space caching is enabled
BTRFS: has skinny extents
BTRFS info (device sde4): disk space caching is enabled
BTRFS: has skinny extents
BTRFS info (device sde9): disk space caching is enabled
BTRFS: has skinny extents
SGI XFS with ACLs, security attributes, realtime, no debug enabled
XFS (sda3): Mounting V5 Filesystem
XFS (sdb1): Mounting V5 Filesystem
XFS (sdc1): Mounting V5 Filesystem
XFS (sdd2): Mounting V5 Filesystem
XFS (sda1): Mounting V5 Filesystem
XFS (sda2): Mounting V5 Filesystem
XFS (sdb1): Ending clean mount
BTRFS info (device sde5): disk space caching is enabled
BTRFS: has skinny extents
BTRFS info (device sdb2): disk space caching is enabled
BTRFS: has skinny extents
BTRFS info (device sde8): disk space caching is enabled
BTRFS: has skinny extents
XFS (sdc1): Ending clean mount
XFS (sde12): Mounting V5 Filesystem
XFS (sda2): Ending clean mount
XFS (sda3): Ending clean mount
XFS (sde10): Mounting V5 Filesystem
XFS (sde11): Mounting V5 Filesystem
XFS (sda1): Ending clean mount
XFS (sde7): Mounting V5 Filesystem
EXT4-fs (sde2): mounted filesystem with ordered data mode. Opts: acl,user_xattr
systemd-journald[552]: Received request to flush runtime journal from PID 1
XFS (sde10): Ending clean mount
XFS (sde7): Ending clean mount
XFS (sde11): Ending clean mount
XFS (sde12): Ending clean mount
XFS (sdd1): Mounting V5 Filesystem
XFS (sdd1): Ending clean mount
XFS (sdd2): Ending clean mount
nct6775: Found NCT6776D/F or compatible chip at 0x2e:0x290
No iBFT detected.
IPv6: ADDRCONF(NETDEV_UP): enp11s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp12s0: link is not ready
igb 0000:0b:00.0 enp11s0: igb: enp11s0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): enp11s0: link becomes ready
igb 0000:0c:00.0 enp12s0: igb: enp12s0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): enp12s0: link becomes ready
NET: Registered protocol family 17
usblp0: removed
usblp 4-1.7:1.1: usblp0: USB Bidirectional printer dev 6 if 1 alt 0 proto 2 vid 0x04B8 pid 0x08C4
PAX: PMU arbitration service v1.0.1 has been started.
socperf2_0: SocPerf Driver loading...
socperf2_0: SocPerf Driver about to register chrdev...
socperf2_0: SocPerf Driver: result of alloc_chrdev_region is 0
socperf2_0: SocPerf Driver: major number is 239
socperf2_0: SocPerf Driver: detected 16 CPUs in lwpmudrv_Load
socperf2_0: SocPerf Driver v2.0.0 has been loaded.
sep4_0: PMU collection driver v4.0.0 has been loaded.
sep4_0: Chipset support is enabled.
sep4_0: Graphics support is enabled.
sep4_0: IDT vector 0x21 will be used for handling PMU interrupts.
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
nvidia-modeset: Allocated GPU:0 (GPU-a82af167-5071-23fb-7518-28a38a3d5f1c) @ PCI:0000:03:00.0
cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation
fuse init (API version 7.24)
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 235
perf: interrupt took too long (2509 > 2500), lowering kernel.perf_event_max_sample_rate to 79500