dmesg - oc+100mhzGPU

Return To oc+100mhzGPU System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.2.0-36-generic (buildd@lcy01-27) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #42~14.04.1-Ubuntu SMP Fri May 13 17:27:22 UTC 2016 (Ubuntu 4.2.0-36.42~14.04.1-generic 4.2.8-ckt8)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000abd98fff] usable
BIOS-e820: [mem 0x00000000abd99000-0x00000000abd9ffff] ACPI NVS
BIOS-e820: [mem 0x00000000abda0000-0x00000000ac202fff] usable
BIOS-e820: [mem 0x00000000ac203000-0x00000000ac690fff] reserved
BIOS-e820: [mem 0x00000000ac691000-0x00000000bda5afff] usable
BIOS-e820: [mem 0x00000000bda5b000-0x00000000bddc3fff] reserved
BIOS-e820: [mem 0x00000000bddc4000-0x00000000bdde1fff] ACPI data
BIOS-e820: [mem 0x00000000bdde2000-0x00000000be30afff] ACPI NVS
BIOS-e820: [mem 0x00000000be30b000-0x00000000bef4cfff] reserved
BIOS-e820: [mem 0x00000000bef4d000-0x00000000beffefff] type 20
BIOS-e820: [mem 0x00000000befff000-0x00000000beffffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi:  ESRT=0xbef4b818  ACPI 2.0=0xbddca000  ACPI=0xbddca000  SMBIOS=0xf04d0  MPS=0xfd5d0 
esrt: Reserving ESRT space from 0x00000000bef4b818 to 0x00000000bef4b850.
SMBIOS 2.8 present.
DMI: ASUS All Series/MAXIMUS VII FORMULA, BIOS 3003 10/28/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-DFFFF uncachable
  E0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask 7E00000000 write-back
  1 base 0200000000 mask 7FE0000000 write-back
  2 base 0220000000 mask 7FF0000000 write-back
  3 base 0230000000 mask 7FF8000000 write-back
  4 base 0238000000 mask 7FFC000000 write-back
  5 base 023C000000 mask 7FFE000000 write-back
  6 base 023E000000 mask 7FFF000000 write-back
  7 base 00C0000000 mask 7FC0000000 uncachable
  8 disabled
  9 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 512MB, type WB
reg 2, base: 8704MB, range: 256MB, type WB
reg 3, base: 8960MB, range: 128MB, type WB
reg 4, base: 9088MB, range: 64MB, type WB
reg 5, base: 9152MB, range: 32MB, type WB
reg 6, base: 9184MB, range: 16MB, type WB
reg 7, base: 3GB, range: 1GB, type UC
total RAM covered: 8176M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 32M 	num_reg: 5  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 4GB, range: 4GB, type WB
reg 3, base: 8GB, range: 1GB, type WB
reg 4, base: 9200MB, range: 16MB, type UC
e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] mapped at [ffff8800000fd8e0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x02ff5000, 0x02ff5fff] PGTABLE
BRK [0x02ff6000, 0x02ff6fff] PGTABLE
BRK [0x02ff7000, 0x02ff7fff] PGTABLE
init_memory_mapping: [mem 0x23ee00000-0x23effffff]
 [mem 0x23ee00000-0x23effffff] page 2M
BRK [0x02ff8000, 0x02ff8fff] PGTABLE
init_memory_mapping: [mem 0x220000000-0x23edfffff]
 [mem 0x220000000-0x23edfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x21fffffff]
 [mem 0x200000000-0x21fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xabd98fff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x3fffffff] page 2M
 [mem 0x40000000-0x7fffffff] page 1G
 [mem 0x80000000-0xabbfffff] page 2M
 [mem 0xabc00000-0xabd98fff] page 4k
init_memory_mapping: [mem 0xabda0000-0xac202fff]
 [mem 0xabda0000-0xabdfffff] page 4k
 [mem 0xabe00000-0xac1fffff] page 2M
 [mem 0xac200000-0xac202fff] page 4k
BRK [0x02ff9000, 0x02ff9fff] PGTABLE
init_memory_mapping: [mem 0xac691000-0xbda5afff]
 [mem 0xac691000-0xac7fffff] page 4k
 [mem 0xac800000-0xbd9fffff] page 2M
 [mem 0xbda00000-0xbda5afff] page 4k
BRK [0x02ffa000, 0x02ffafff] PGTABLE
init_memory_mapping: [mem 0xbefff000-0xbeffffff]
 [mem 0xbefff000-0xbeffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
 [mem 0x100000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x3589c000-0x36c45fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000BDDCA000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BDDCA080 00007C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x00000000BDDD9F88 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x00000000BDDCA198 00FDEB (v02 ALASKA A M I    00000011 INTL 20120711)
ACPI: FACS 0x00000000BE30AF80 000040
ACPI: APIC 0x00000000BDDDA098 000092 (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x00000000BDDDA130 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: SSDT 0x00000000BDDDA178 000C7D (v01 Ther_R Ther_Rvp 00001000 INTL 20120711)
ACPI: SSDT 0x00000000BDDDADF8 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
ACPI: SSDT 0x00000000BDDDB338 000B74 (v01 CpuRef CpuSsdt  00003000 INTL 20051117)
ACPI: MCFG 0x00000000BDDDBEB0 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
ACPI: HPET 0x00000000BDDDBEF0 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
ACPI: SSDT 0x00000000BDDDBF28 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
ACPI: SSDT 0x00000000BDDDC298 005977 (v01 SaSsdt SaSsdt   00003000 INTL 20120711)
ACPI: UEFI 0x00000000BDDE1C68 000042 (v01 ALASKA A M I    01072009      00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023effffff]
NODE_DATA(0) allocated [mem 0x23eff7000-0x23effbfff]
 [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236600000-ffff88023e5fffff] on node 0
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000023effffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x0000000000057fff]
  node   0: [mem 0x0000000000059000-0x000000000009efff]
  node   0: [mem 0x0000000000100000-0x00000000abd98fff]
  node   0: [mem 0x00000000abda0000-0x00000000ac202fff]
  node   0: [mem 0x00000000ac691000-0x00000000bda5afff]
  node   0: [mem 0x00000000befff000-0x00000000beffffff]
  node   0: [mem 0x0000000100000000-0x000000023effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000023effffff]
On node 0 totalpages: 2082148
  DMA zone: 64 pages used for memmap
  DMA zone: 27 pages reserved
  DMA zone: 3997 pages, LIFO batch:0
  DMA32 zone: 12056 pages used for memmap
  DMA32 zone: 771527 pages, LIFO batch:31
  Normal zone: 20416 pages used for memmap
  Normal zone: 1306624 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xabd99000-0xabd9ffff]
PM: Registered nosave memory: [mem 0xac203000-0xac690fff]
PM: Registered nosave memory: [mem 0xbda5b000-0xbddc3fff]
PM: Registered nosave memory: [mem 0xbddc4000-0xbdde1fff]
PM: Registered nosave memory: [mem 0xbdde2000-0xbe30afff]
PM: Registered nosave memory: [mem 0xbe30b000-0xbef4cfff]
PM: Registered nosave memory: [mem 0xbef4d000-0xbeffefff]
PM: Registered nosave memory: [mem 0xbf000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xbf000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88023ec00000 s96728 r8192 d30248 u262144
pcpu-alloc: s96728 r8192 d30248 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2049585
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7863204K/8328592K available (7969K kernel code, 1244K rwdata, 3816K rodata, 1472K init, 1292K bss, 465388K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 64.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:488 16
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
spurious 8259A interrupt: IRQ7.
tsc: Detected 4000.307 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 8000.61 BogoMIPS (lpj=16001228)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 28K (ffffffff81ea9000 - ffffffff81eb0000)
ftrace: allocating 30999 entries in 122 pages
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz (fam: 06, model: 3c, stepping: 03)
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (64004.91 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xabd99000-0xabd9ffff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xbdde2000-0xbe30afff] (5410816 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time:  6:01:34, date: 06/04/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 4 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880234F92000 0005AA (v01 PmRef  ApIst    00003000 INTL 20051117)
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff window]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdf420000-0xdf42ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdf43a000-0xdf43a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xdf400000-0xdf41ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xdf438000-0xdf438fff]
pci 0000:00:19.0: reg 0x18: [io  0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xdf437000-0xdf4373ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xdf430000-0xdf433fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8c96] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:8c9c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xdf436000-0xdf4363ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io  0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io  0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io  0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xdf435000-0xdf4357ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xdf434000-0xdf4340ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
pci 0000:01:00.0: [10de:13c0] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [10de:0fbb] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xdf080000-0xdf083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [1b21:1187] type 01 class 0x060400
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 03-0b]
pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.3:   bridge window [mem 0xdf100000-0xdf2fffff]
pci 0000:04:01.0: [1b21:1187] type 01 class 0x060400
pci 0000:04:01.0: PME# supported from D0 D3hot D3cold
pci 0000:04:02.0: [1b21:1187] type 01 class 0x060400
pci 0000:04:02.0: PME# supported from D0 D3hot D3cold
pci 0000:04:03.0: [1b21:1187] type 01 class 0x060400
pci 0000:04:03.0: PME# supported from D0 D3hot D3cold
pci 0000:04:04.0: [1b21:1187] type 01 class 0x060400
pci 0000:04:04.0: PME# supported from D0 D3hot D3cold
pci 0000:04:05.0: [1b21:1187] type 01 class 0x060400
pci 0000:04:05.0: PME# supported from D0 D3hot D3cold
pci 0000:04:06.0: [1b21:1187] type 01 class 0x060400
pci 0000:04:06.0: PME# supported from D0 D3hot D3cold
pci 0000:04:07.0: [1b21:1187] type 01 class 0x060400
pci 0000:04:07.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PCI bridge to [bus 04-0b]
pci 0000:03:00.0:   bridge window [io  0xd000-0xdfff]
pci 0000:03:00.0:   bridge window [mem 0xdf100000-0xdf2fffff]
pci 0000:04:01.0: PCI bridge to [bus 05]
pci 0000:04:02.0: PCI bridge to [bus 06]
pci 0000:07:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:07:00.0: reg 0x10: [io  0xd050-0xd057]
pci 0000:07:00.0: reg 0x14: [io  0xd040-0xd043]
pci 0000:07:00.0: reg 0x18: [io  0xd030-0xd037]
pci 0000:07:00.0: reg 0x1c: [io  0xd020-0xd023]
pci 0000:07:00.0: reg 0x20: [io  0xd000-0xd01f]
pci 0000:07:00.0: reg 0x24: [mem 0xdf200000-0xdf2001ff]
pci 0000:04:03.0: PCI bridge to [bus 07]
pci 0000:04:03.0:   bridge window [io  0xd000-0xdfff]
pci 0000:04:03.0:   bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:04:04.0: PCI bridge to [bus 08]
pci 0000:04:05.0: PCI bridge to [bus 09]
pci 0000:0a:00.0: [1b21:1142] type 00 class 0x0c0330
pci 0000:0a:00.0: reg 0x10: [mem 0xdf100000-0xdf107fff 64bit]
pci 0000:0a:00.0: PME# supported from D3cold
pci 0000:04:06.0: PCI bridge to [bus 0a]
pci 0000:04:06.0:   bridge window [mem 0xdf100000-0xdf1fffff]
pci 0000:04:07.0: PCI bridge to [bus 0b]
pci 0000:0c:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:0c:00.0: reg 0x10: [io  0xc050-0xc057]
pci 0000:0c:00.0: reg 0x14: [io  0xc040-0xc043]
pci 0000:0c:00.0: reg 0x18: [io  0xc030-0xc037]
pci 0000:0c:00.0: reg 0x1c: [io  0xc020-0xc023]
pci 0000:0c:00.0: reg 0x20: [io  0xc000-0xc01f]
pci 0000:0c:00.0: reg 0x24: [mem 0xdf300000-0xdf3001ff]
pci 0000:0c:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.6: PCI bridge to [bus 0c]
pci 0000:00:1c.6:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.6:   bridge window [mem 0xdf300000-0xdf3fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 11 12 14 15)
ACPI: Enabled 6 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0xabd99000-0xabffffff]
e820: reserve RAM buffer [mem 0xac203000-0xafffffff]
e820: reserve RAM buffer [mem 0xbda5b000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff]
e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io  0x0800-0x087f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io  0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io  0x0290-0x029f] has been reserved
system 00:04: [io  0x02a0-0x02af] has been reserved
system 00:04: [io  0x0a00-0x0aff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io  0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: [mem 0xdffe0000-0xdffeffff] has been reserved
system 00:06: [mem 0xdfff0000-0xdfffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:04:01.0: PCI bridge to [bus 05]
pci 0000:04:02.0: PCI bridge to [bus 06]
pci 0000:04:03.0: PCI bridge to [bus 07]
pci 0000:04:03.0:   bridge window [io  0xd000-0xdfff]
pci 0000:04:03.0:   bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:04:04.0: PCI bridge to [bus 08]
pci 0000:04:05.0: PCI bridge to [bus 09]
pci 0000:04:06.0: PCI bridge to [bus 0a]
pci 0000:04:06.0:   bridge window [mem 0xdf100000-0xdf1fffff]
pci 0000:04:07.0: PCI bridge to [bus 0b]
pci 0000:03:00.0: PCI bridge to [bus 04-0b]
pci 0000:03:00.0:   bridge window [io  0xd000-0xdfff]
pci 0000:03:00.0:   bridge window [mem 0xdf100000-0xdf2fffff]
pci 0000:00:1c.3: PCI bridge to [bus 03-0b]
pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.3:   bridge window [mem 0xdf100000-0xdf2fffff]
pci 0000:00:1c.6: PCI bridge to [bus 0c]
pci 0000:00:1c.6:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.6:   bridge window [mem 0xdf300000-0xdf3fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0xc0000000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xdf100000-0xdf2fffff]
pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xdf100000-0xdf2fffff]
pci_bus 0000:07: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:07: resource 1 [mem 0xdf200000-0xdf2fffff]
pci_bus 0000:0a: resource 1 [mem 0xdf100000-0xdf1fffff]
pci_bus 0000:0c: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:0c: resource 1 [mem 0xdf300000-0xdf3fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 20136K (ffff88003589c000 - ffff880036c46000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xa7d99000-0xabd99000] (64MB) mapped at [ffff8800a7d99000-ffff8800abd98fff]
RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
hw unit of domain pp0-core 2^-14 Joules
hw unit of domain package 2^-14 Joules
hw unit of domain dram 2^-14 Joules
hw unit of domain pp1-gpu 2^-14 Joules
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x19
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1465020094.388:1): initialized
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xd1000000, mapped to 0xffffc90001000000, using 1920k, total 1920k
efifb: mode is 800x600x32, linelength=3200, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 100x37
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4.1 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.2.0-36-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.2.0-36-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
xhci_hcd 0000:0a:00.0: xHCI Host Controller
xhci_hcd 0000:0a:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:0a:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x00000010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.2.0-36-generic xhci-hcd
usb usb3: SerialNumber: 0000:0a:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:0a:00.0: xHCI Host Controller
xhci_hcd 0000:0a:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.2.0-36-generic xhci-hcd
usb usb4: SerialNumber: 0000:0a:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 5
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 20, io mem 0xdf437000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 4.2.0-36-generic ehci_hcd
usb usb5: SerialNumber: 0000:00:1a.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 6
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xdf436000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: EHCI Host Controller
usb usb6: Manufacturer: Linux 4.2.0-36-generic ehci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc rtc0: invalid alarm value: 2016-6-4 6:63:63
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: [email protected]
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
PCCT header not found.
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 88c2a3e9923be7846a02954d3dcfd246b2c2079a'
registered taskstats version 1
zswap: loading zswap
zswap: using zbud pool
zswap: using lzo compressor
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
  Magic number: 4:893:12
memory memory56: hash matches
rtc_cmos 00:02: setting system clock to 2016-06-04 06:01:34 UTC (1465020094)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1472K (ffffffff81d39000 - ffffffff81ea9000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 212K (ffff8800027cb000 - ffff880002800000)
Freeing unused kernel memory: 280K (ffff880002bba000 - ffff880002c00000)
systemd-udevd[148]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst 
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.5-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xdf435000 port 0xdf435100 irq 42
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xdf435000 port 0xdf435200 irq 42
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
ahci 0000:07:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:07:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:07:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc 
scsi host6: ahci
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
scsi host7: ahci
ata7: SATA max UDMA/133 abar m512@0xdf200000 port 0xdf200100 irq 43
ata8: SATA max UDMA/133 abar m512@0xdf200000 port 0xdf200180 irq 43
ahci 0000:0c:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:0c:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:0c:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc 
scsi host8: ahci
scsi host9: ahci
ata9: SATA max UDMA/133 abar m512@0xdf300000 port 0xdf300100 irq 45
ata10: SATA max UDMA/133 abar m512@0xdf300000 port 0xdf300180 irq 45
usb 2-6: new SuperSpeed USB device number 2 using xhci_hcd
usb 2-6: New USB device found, idVendor=05e3, idProduct=0616
usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-6: Product: USB3.0 Hub
usb 2-6: Manufacturer: GenesysLogic
hub 2-6:1.0: USB hub found
hub 2-6:1.0: 4 ports detected
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 78:24:af:bc:5d:c9
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
usb 1-10: new high-speed USB device number 2 using xhci_hcd
usb 5-1: new high-speed USB device number 2 using ehci-pci
usb 6-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: supports DRM functions and may not be fully accessible
ata3.00: READ LOG DMA EXT failed, trying unqueued
ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
ata3.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT01B6Q, max UDMA/133
ata3.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: disabling queued TRIM support
ata1.00: ATA-9: Samsung SSD 850 PRO 256GB, EXM02B6Q, max UDMA/133
ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: disabling queued TRIM support
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 850  2B6Q PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: supports DRM functions and may not be fully accessible
ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
ata3.00: configured for UDMA/133
 sda: sda1 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 2:0:0:0: Direct-Access     ATA      Samsung SSD 850  1B6Q PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI disk
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
usb 1-10: New USB device found, idVendor=05e3, idProduct=0610
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-10: Product: USB2.0 Hub
usb 1-10: Manufacturer: GenesysLogic
hub 1-10:1.0: USB hub found
hub 1-10:1.0: 4 ports detected
usb 5-1: New USB device found, idVendor=8087, idProduct=8009
usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 6 ports detected
usb 6-1: New USB device found, idVendor=8087, idProduct=8001
usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 6-1:1.0: USB hub found
hub 6-1:1.0: 8 ports detected
usb 1-11: new low-speed USB device number 3 using xhci_hcd
ata8: SATA link down (SStatus 0 SControl 300)
usb 1-11: New USB device found, idVendor=04d9, idProduct=1818
usb 1-11: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-11: Product: USB Keyboard
tsc: Refined TSC clocksource calibration: 3999.996 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x7350b459580, max_idle_ns: 881591204237 ns
usb 1-14: new full-speed USB device number 4 using xhci_hcd
ata10: SATA link down (SStatus 0 SControl 300)
random: init urandom read with 28 bits of entropy available
init: plymouth-upstart-bridge main process (248) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (259) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (264) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
usb 1-14: New USB device found, idVendor=1532, idProduct=0043
usb 1-14: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-14: Product: Razer DeathAdder Chroma
usb 1-14: Manufacturer: Razer
Adding 8328188k swap on /dev/sda3.  Priority:-1 extents:1 across:8328188k SSFS
systemd-udevd[384]: starting version 204
EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
wmi: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[drm] Initialized drm 1.1.0 20060810
hidraw: raw HID events driver (C) Jiri Kosina
nvidia_drm: module license 'MIT' taints kernel.
Disabling lock debugging due to kernel taint
nvidia_drm: module verification failed: signature and/or required key missing - tainting kernel
nvidia_drm: Unknown symbol nvKmsKapiGetFunctionsTable (err 0)
nvidia_drm: Unknown symbol nvKmsKapiGetFunctionsTable (err 0)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
init: cups pre-start process (583) terminated with status 1
audit: type=1400 audit(1465020095.737:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=618 comm="apparmor_parser"
audit: type=1400 audit(1465020095.737:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=618 comm="apparmor_parser"
audit: type=1400 audit(1465020095.737:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=618 comm="apparmor_parser"
audit: type=1400 audit(1465020095.737:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=618 comm="apparmor_parser"
audit: type=1400 audit(1465020095.737:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=618 comm="apparmor_parser"
audit: type=1400 audit(1465020095.737:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=618 comm="apparmor_parser"
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input5
asus_wmi: Number of fans: 1
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/0003:04D9:1818.0001/input/input6
init: avahi-cups-reload main process (695) terminated with status 1
kvm: disabled by bios
hid-generic 0003:04D9:1818.0001: input,hidraw0: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:00:14.0-11/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.1/0003:04D9:1818.0002/input/input7
kvm: disabled by bios
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
nvidia-nvlink: Nvlink Core is being initialized, major device number 244
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  364.19  Tue Apr 19 14:44:55 PDT 2016
init: failsafe main process (729) killed by TERM signal
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  364.19  Tue Apr 19 14:15:03 PDT 2016
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
nvidia-uvm: Loaded the UVM driver in lite mode, major device number 243
hid-generic 0003:04D9:1818.0002: input,hidraw1: USB HID v1.10 Device [USB Keyboard] on usb-0000:00:14.0-11/input1
input: Razer Razer DeathAdder Chroma as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/0003:1532:0043.0003/input/input8
hid-generic 0003:1532:0043.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer DeathAdder Chroma] on usb-0000:00:14.0-14/input0
input: Razer Razer DeathAdder Chroma as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.1/0003:1532:0043.0004/input/input9
snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0:    inputs:
snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
random: nonblocking pool is initialized
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
audit: type=1400 audit(1465020095.917:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=908 comm="apparmor_parser"
audit: type=1400 audit(1465020095.921:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=904 comm="apparmor_parser"
audit: type=1400 audit(1465020095.921:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=904 comm="apparmor_parser"
hid-generic 0003:1532:0043.0004: input,hidraw3: USB HID v1.11 Keyboard [Razer Razer DeathAdder Chroma] on usb-0000:00:14.0-14/input1
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: Razer Razer DeathAdder Chroma as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.2/0003:1532:0043.0005/input/input18
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
hid-generic 0003:1532:0043.0005: input,hidraw4: USB HID v1.11 Keyboard [Razer Razer DeathAdder Chroma] on usb-0000:00:14.0-14/input2
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
clocksource: Switched to clocksource tsc
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22
init: cups-browsed pre-start process (1074) terminated with status 1
nvidia-modeset: Allocated GPU:0 (GPU-c9410924-661a-632f-800b-ad358879d533) @ PCI:0000:01:00.0
input: Razer Razer DeathAdder Chroma as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/0003:1532:0043.0006/input/input23
hid-generic 0003:1532:0043.0006: input,hidraw2: USB HID v1.11 Mouse [Razer Razer DeathAdder Chroma] on usb-0000:00:14.0-14/input0
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1410) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
input: Razer Razer DeathAdder Chroma as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/0003:1532:0043.0007/input/input24
hid-generic 0003:1532:0043.0007: input,hidraw2: USB HID v1.11 Mouse [Razer Razer DeathAdder Chroma] on usb-0000:00:14.0-14/input0
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
input: Razer Razer DeathAdder Chroma as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/0003:1532:0043.0008/input/input25
hid-generic 0003:1532:0043.0008: input,hidraw2: USB HID v1.11 Mouse [Razer Razer DeathAdder Chroma] on usb-0000:00:14.0-14/input0

Return To oc+100mhzGPU System Information