dmesg - 1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.2.0-36-generic (buildd@lgw01-42) (gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu2) ) #42-Ubuntu SMP Thu May 12 22:05:35 UTC 2016 (Ubuntu 4.2.0-36.42-generic 4.2.8-ckt8)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x00000000000927ff] usable
BIOS-e820: [mem 0x0000000000092800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007de7bfff] usable
BIOS-e820: [mem 0x000000007de7c000-0x000000007deabfff] reserved
BIOS-e820: [mem 0x000000007deac000-0x000000007dfc3fff] ACPI data
BIOS-e820: [mem 0x000000007dfc4000-0x000000007e1d2fff] ACPI NVS
BIOS-e820: [mem 0x000000007e1d3000-0x000000007f361fff] reserved
BIOS-e820: [mem 0x000000007f362000-0x000000007f7fffff] ACPI NVS
BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./EP2C602, BIOS P1.80 12/09/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x880000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask 3FF800000000 write-back
1 base 000800000000 mask 3FFF80000000 write-back
2 base 000080000000 mask 3FFF80000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
original variable MTRRs
reg 0, base: 0GB, range: 32GB, type WB
reg 1, base: 32GB, range: 2GB, type WB
reg 2, base: 2GB, range: 2GB, type UC
total RAM covered: 32768M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64K num_reg: 5 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 4GB, range: 4GB, type WB
reg 2, base: 8GB, range: 8GB, type WB
reg 3, base: 16GB, range: 16GB, type WB
reg 4, base: 32GB, range: 2GB, type WB
e820: update [mem 0x80000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x7de7c max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fda80-0x000fda8f] mapped at [ffff8800000fda80]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff88000008c000] 8c000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x021f1000, 0x021f1fff] PGTABLE
BRK [0x021f2000, 0x021f2fff] PGTABLE
BRK [0x021f3000, 0x021f3fff] PGTABLE
init_memory_mapping: [mem 0x87fe00000-0x87fffffff]
[mem 0x87fe00000-0x87fffffff] page 1G
init_memory_mapping: [mem 0x860000000-0x87fdfffff]
[mem 0x860000000-0x87fdfffff] page 1G
init_memory_mapping: [mem 0x00100000-0x7de7bfff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x7ddfffff] page 2M
[mem 0x7de00000-0x7de7bfff] page 4k
init_memory_mapping: [mem 0x100000000-0x85fffffff]
[mem 0x100000000-0x85fffffff] page 1G
RAMDISK: [mem 0x340d4000-0x36061fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
ACPI: XSDT 0x000000007DEE4090 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000007DEF1BD0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000007DEE41B8 00DA14 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 0x000000007E1CA080 000040
ACPI: APIC 0x000000007DEF1CE0 000138 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000007DEF1E18 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000007DEF1E60 00003C (v01 ALASKA OEMMCFG. 01072009 MSFT 00000097)
ACPI: AAFT 0x000000007DEF1EA0 00003A (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: HPET 0x000000007DEF1EE0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: PRAD 0x000000007DEF1F18 0000BE (v02 PRADID PRADTID 00000001 MSFT 03000001)
ACPI: SPMI 0x000000007DEF1FD8 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000)
ACPI: SSDT 0x000000007DEF2018 0D0CB0 (v02 INTEL CpuPm 00004000 INTL 20051117)
ACPI: SPCR 0x000000007DFC2CC8 000050 (v01 A M I APTIO4 01072009 AMI. 00000005)
ACPI: EINJ 0x000000007DFC2D18 000130 (v01 AMI AMI EINJ 00000000 00000000)
ACPI: ERST 0x000000007DFC2E48 000230 (v01 AMIER AMI ERST 00000000 00000000)
ACPI: HEST 0x000000007DFC3078 0000A8 (v01 AMI AMI HEST 00000000 00000000)
ACPI: BERT 0x000000007DFC3120 000030 (v01 AMI AMI BERT 00000000 00000000)
ACPI: DMAR 0x000000007DFC3150 0000CC (v01 A M I OEMDMAR 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000087fffffff]
NODE_DATA(0) allocated [mem 0x87fff9000-0x87fffdfff]
[ffffea0000000000-ffffea0021ffffff] PMD -> [ffff88085f600000-ffff88087f5fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000087fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000091fff]
node 0: [mem 0x0000000000100000-0x000000007de7bfff]
node 0: [mem 0x0000000100000000-0x000000087fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff]
On node 0 totalpages: 8379917
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3985 pages, LIFO batch:0
DMA32 zone: 7994 pages used for memmap
DMA32 zone: 511612 pages, LIFO batch:31
Normal zone: 122880 pages used for memmap
Normal zone: 7864320 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00092000-0x00092fff]
PM: Registered nosave memory: [mem 0x00093000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x7de7c000-0x7deabfff]
PM: Registered nosave memory: [mem 0x7deac000-0x7dfc3fff]
PM: Registered nosave memory: [mem 0x7dfc4000-0x7e1d2fff]
PM: Registered nosave memory: [mem 0x7e1d3000-0x7f361fff]
PM: Registered nosave memory: [mem 0x7f362000-0x7f7fffff]
PM: Registered nosave memory: [mem 0x7f800000-0x7fffffff]
PM: Registered nosave memory: [mem 0x80000000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x90000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88085f200000 s96728 r8192 d30248 u262144
pcpu-alloc: s96728 r8192 d30248 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Built 1 zonelists in Node order, mobility grouping on. Total pages: 8248958
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32876136K/33519668K available (8183K kernel code, 1239K rwdata, 3808K rodata, 1464K init, 1292K bss, 643532K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=16
NR_IRQS:16640 nr_irqs:960 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-15.
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2600.020 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5200.04 BogoMIPS (lpj=10400080)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 20 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff820a5000 - ffffffff820ac000)
ftrace: allocating 30950 entries in 121 pages
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffc000 flags: 0x1
DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0462 ecap f020ff
DMAR: RMRR base: 0x0000007f241000 end: 0x0000007f24efff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0
DMAR-IR: IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0
DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfbffc000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2670 0 @ 2.60GHz (fam: 06, model: 2d, stepping: 07)
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
x86: Booted up 1 node, 16 CPUs
smpboot: Total of 16 processors activated (83200.64 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x7dfc4000-0x7e1d2fff] (2158592 bytes)
PM: Registering ACPI NVS region [mem 0x7f362000-0x7f7fffff] (4841472 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 1:05:34, date: 12/09/13
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
_OSC request data:1 1f
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150619/hwxface-580)
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window]
pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:01.1: [8086:3c03] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:03.2: [8086:3c0a] type 01 class 0x060400
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: System wakeup disabled by ACPI
pci 0000:00:04.0: [8086:3c20] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [mem 0xfa91c000-0xfa91ffff 64bit]
pci 0000:00:04.1: [8086:3c21] type 00 class 0x088000
pci 0000:00:04.1: reg 0x10: [mem 0xfa918000-0xfa91bfff 64bit]
pci 0000:00:04.2: [8086:3c22] type 00 class 0x088000
pci 0000:00:04.2: reg 0x10: [mem 0xfa914000-0xfa917fff 64bit]
pci 0000:00:04.3: [8086:3c23] type 00 class 0x088000
pci 0000:00:04.3: reg 0x10: [mem 0xfa910000-0xfa913fff 64bit]
pci 0000:00:04.4: [8086:3c24] type 00 class 0x088000
pci 0000:00:04.4: reg 0x10: [mem 0xfa90c000-0xfa90ffff 64bit]
pci 0000:00:04.5: [8086:3c25] type 00 class 0x088000
pci 0000:00:04.5: reg 0x10: [mem 0xfa908000-0xfa90bfff 64bit]
pci 0000:00:04.6: [8086:3c26] type 00 class 0x088000
pci 0000:00:04.6: reg 0x10: [mem 0xfa904000-0xfa907fff 64bit]
pci 0000:00:04.7: [8086:3c27] type 00 class 0x088000
pci 0000:00:04.7: reg 0x10: [mem 0xfa900000-0xfa903fff 64bit]
pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfa927000-0xfa927fff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfa926000-0xfa92600f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000
pci 0000:00:16.1: reg 0x10: [mem 0xfa925000-0xfa92500f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfa923000-0xfa9233ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:1d18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:1d1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfa922000-0xfa9223ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfa921000-0xfa9217ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfa920000-0xfa9200ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:03:00.0: [10de:0e22] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xf8000000-0xf9ffffff]
pci 0000:03:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:03:00.0: reg 0x1c: [mem 0xf0000000-0xf3ffffff 64bit pref]
pci 0000:03:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:03:00.0: reg 0x30: [mem 0xfa000000-0xfa07ffff pref]
pci 0000:03:00.1: [10de:0beb] type 00 class 0x040300
pci 0000:03:00.1: reg 0x10: [mem 0xfa080000-0xfa083fff]
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfa0fffff]
pci 0000:00:02.0: bridge window [mem 0xe8000000-0xf3ffffff 64bit pref]
pci 0000:04:00.0: [1814:0781] type 00 class 0x028000
pci 0000:04:00.0: reg 0x10: [mem 0xfa800000-0xfa80ffff]
pci 0000:04:00.0: PME# supported from D0 D3hot
pci 0000:00:03.0: PCI bridge to [bus 04]
pci 0000:00:03.0: bridge window [mem 0xfa800000-0xfa8fffff]
pci 0000:05:00.0: [1b73:1100] type 00 class 0x0c0330
pci 0000:05:00.0: reg 0x10: [mem 0xfa700000-0xfa70ffff 64bit]
pci 0000:05:00.0: reg 0x18: [mem 0xfa711000-0xfa711fff 64bit]
pci 0000:05:00.0: reg 0x20: [mem 0xfa710000-0xfa710fff 64bit]
pci 0000:05:00.0: supports D1
pci 0000:05:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:03.2: PCI bridge to [bus 05]
pci 0000:00:03.2: bridge window [mem 0xfa700000-0xfa7fffff]
pci 0000:06:00.0: [8086:1d6b] type 00 class 0x010700
pci 0000:06:00.0: reg 0x10: [mem 0xf487c000-0xf487ffff 64bit pref]
pci 0000:06:00.0: reg 0x18: [mem 0xf4400000-0xf47fffff 64bit pref]
pci 0000:06:00.0: reg 0x20: [io 0xd000-0xd0ff]
pci 0000:06:00.0: reg 0x164: [mem 0xf4800000-0xf4803fff 64bit pref]
pci 0000:06:00.0: VF(n) BAR0 space: [mem 0xf4800000-0xf487bfff 64bit pref] (contains BAR0 for 31 VFs)
pci 0000:00:11.0: PCI bridge to [bus 06]
pci 0000:00:11.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:11.0: bridge window [mem 0xfa600000-0xfa6fffff]
pci 0000:00:11.0: bridge window [mem 0xf4400000-0xf48fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 07]
pci 0000:08:00.0: [8086:10d3] type 00 class 0x020000
pci 0000:08:00.0: reg 0x10: [mem 0xfa440000-0xfa45ffff]
pci 0000:08:00.0: reg 0x14: [mem 0xfa300000-0xfa3fffff]
pci 0000:08:00.0: reg 0x18: [io 0xc000-0xc01f]
pci 0000:08:00.0: reg 0x1c: [mem 0xfa460000-0xfa463fff]
pci 0000:08:00.0: reg 0x30: [mem 0xfa400000-0xfa43ffff pref]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 08]
pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.1: bridge window [mem 0xfa300000-0xfa4fffff]
pci 0000:09:00.0: [1b4b:9230] type 00 class 0x010601
pci 0000:09:00.0: reg 0x10: [io 0xb050-0xb057]
pci 0000:09:00.0: reg 0x14: [io 0xb040-0xb043]
pci 0000:09:00.0: reg 0x18: [io 0xb030-0xb037]
pci 0000:09:00.0: reg 0x1c: [io 0xb020-0xb023]
pci 0000:09:00.0: reg 0x20: [io 0xb000-0xb01f]
pci 0000:09:00.0: reg 0x24: [mem 0xfa510000-0xfa5107ff]
pci 0000:09:00.0: reg 0x30: [mem 0xfa500000-0xfa50ffff pref]
pci 0000:09:00.0: PME# supported from D3hot
pci 0000:00:1c.4: PCI bridge to [bus 09]
pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.4: bridge window [mem 0xfa500000-0xfa5fffff]
pci 0000:0a:00.0: [8086:10d3] type 00 class 0x020000
pci 0000:0a:00.0: reg 0x10: [mem 0xfa240000-0xfa25ffff]
pci 0000:0a:00.0: reg 0x14: [mem 0xfa100000-0xfa1fffff]
pci 0000:0a:00.0: reg 0x18: [io 0xa000-0xa01f]
pci 0000:0a:00.0: reg 0x1c: [mem 0xfa260000-0xfa263fff]
pci 0000:0a:00.0: reg 0x30: [mem 0xfa200000-0xfa23ffff pref]
pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 0a]
pci 0000:00:1c.7: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.7: bridge window [mem 0xfa100000-0xfa2fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0b] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:ff:08.3: [8086:3c83] type 00 class 0x088000
pci 0000:ff:08.4: [8086:3c84] type 00 class 0x088000
pci 0000:ff:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:ff:09.3: [8086:3c93] type 00 class 0x088000
pci 0000:ff:09.4: [8086:3c94] type 00 class 0x088000
pci 0000:ff:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:ff:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:ff:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:ff:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:ff:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:ff:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.2: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.3: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:ff:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:ff:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:ff:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:ff:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:ff:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:ff:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:ff:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:ff:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:ff:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:ff:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:ff:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:ff:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:ff:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:ff:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:ff:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:ff:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:ff:13.6: [8086:3c45] type 00 class 0x088000
pci_bus 0000:ff: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:03:00.0
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00092800-0x0009ffff]
e820: reserve RAM buffer [mem 0x7de7c000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed45000-0xfedfffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0290-0x029f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
system 00:04: [io 0x0a00-0x0a1f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: Plug and Play ACPI device, IDs IPI0001 (active)
system 00:0a: [io 0x0400-0x0453] could not be reserved
system 00:0a: [io 0x0458-0x047f] has been reserved
system 00:0a: [io 0x1180-0x119f] has been reserved
system 00:0a: [io 0x0500-0x057f] has been reserved
system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:0a: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:0b: [io 0x0454-0x0457] has been reserved
system 00:0b: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp: PnP ACPI: found 12 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfa0fffff]
pci 0000:00:02.0: bridge window [mem 0xe8000000-0xf3ffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 04]
pci 0000:00:03.0: bridge window [mem 0xfa800000-0xfa8fffff]
pci 0000:00:03.2: PCI bridge to [bus 05]
pci 0000:00:03.2: bridge window [mem 0xfa700000-0xfa7fffff]
pci 0000:00:11.0: PCI bridge to [bus 06]
pci 0000:00:11.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:11.0: bridge window [mem 0xfa600000-0xfa6fffff]
pci 0000:00:11.0: bridge window [mem 0xf4400000-0xf48fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 07]
pci 0000:00:1c.1: PCI bridge to [bus 08]
pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.1: bridge window [mem 0xfa300000-0xfa4fffff]
pci 0000:00:1c.4: PCI bridge to [bus 09]
pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.4: bridge window [mem 0xfa500000-0xfa5fffff]
pci 0000:00:1c.7: PCI bridge to [bus 0a]
pci 0000:00:1c.7: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.7: bridge window [mem 0xfa100000-0xfa2fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0b]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0x80000000-0xfbffffff window]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xf8000000-0xfa0fffff]
pci_bus 0000:03: resource 2 [mem 0xe8000000-0xf3ffffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xfa800000-0xfa8fffff]
pci_bus 0000:05: resource 1 [mem 0xfa700000-0xfa7fffff]
pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xfa600000-0xfa6fffff]
pci_bus 0000:06: resource 2 [mem 0xf4400000-0xf48fffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:08: resource 1 [mem 0xfa300000-0xfa4fffff]
pci_bus 0000:09: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:09: resource 1 [mem 0xfa500000-0xfa5fffff]
pci_bus 0000:0a: resource 0 [io 0xa000-0xafff]
pci_bus 0000:0a: resource 1 [mem 0xfa100000-0xfa2fffff]
pci_bus 0000:0b: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:0b: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:0b: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:0b: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:0b: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:0b: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:0b: resource 10 [mem 0x80000000-0xfbffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 32312K (ffff8800340d4000 - ffff880036062000)
DMAR: [Firmware Bug]: RMRR entry for device 05:00.0 is broken - applying workaround
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x79e7c000-0x7de7c000] (64MB) mapped at [ffff880079e7c000-ffff88007de7bfff]
RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
hw unit of domain pp0-core 2^-16 Joules
hw unit of domain package 2^-16 Joules
hw unit of domain dram 2^-16 Joules
microcode: CPU0 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU1 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU2 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU3 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU4 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU5 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU6 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU7 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU8 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU9 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU10 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU11 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU12 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU13 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU14 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU15 sig=0x206d7, pf=0x1, revision=0x710
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 4096 (order: 6, 262144 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1386551134.936:1): initialized
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
aer 0000:00:01.0:pcie02: service driver aer loaded
aer 0000:00:01.1:pcie02: service driver aer loaded
aer 0000:00:02.0:pcie02: service driver aer loaded
aer 0000:00:03.0:pcie02: service driver aer loaded
aer 0000:00:03.2:pcie02: service driver aer loaded
aer 0000:00:11.0:pcie02: service driver aer loaded
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:01.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.2: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:11.0: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:11.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
pci 0000:0a:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4.1 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by WHEA _OSC.
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:05:00.0: hcc params 0x200071e1 hci version 0x100 quirks 0x00000010
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.2.0-36-generic xhci-hcd
usb usb1: SerialNumber: 0000:05:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.2.0-36-generic xhci-hcd
usb usb2: SerialNumber: 0000:05:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xfa923000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 4.2.0-36-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfa922000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 4.2.0-36-generic ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:07: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: b8e38522515dfe48cdc9ba8d8c2f75cf0057650b'
registered taskstats version 1
zswap: loading zswap
zswap: using zbud pool
zswap: using lzo compressor
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 9:328:53
memory memory218: hash matches
memory memory85: hash matches
rtc_cmos 00:07: setting system clock to 2013-12-09 01:05:35 UTC (1386551135)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1464K (ffffffff81f37000 - ffffffff820a5000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 2044K (ffff880001801000 - ffff880001a00000)
Freeing unused kernel memory: 288K (ffff880001db8000 - ffff880001e00000)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
random: systemd-udevd urandom read with 2 bits of entropy available
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
ahci 0000:00:1f.2: version 3.0
PTP clock support registered
isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
isci 0000:06:00.0: driver configured for rev: 6 silicon
isci 0000:06:00.0: OEM parameter table found in OROM
isci 0000:06:00.0: OEM SAS parameters (version: 1.0) loaded (platform)
isci 0000:06:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short}
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.5-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
scsi host0: isci
e1000e 0000:08:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
ata1: SATA max UDMA/133 abar m2048@0xfa921000 port 0xfa921100 irq 45
ata2: SATA max UDMA/133 abar m2048@0xfa921000 port 0xfa921180 irq 45
ata3: SATA max UDMA/133 abar m2048@0xfa921000 port 0xfa921200 irq 45
ata4: SATA max UDMA/133 abar m2048@0xfa921000 port 0xfa921280 irq 45
ata5: SATA max UDMA/133 abar m2048@0xfa921000 port 0xfa921300 irq 45
ata6: SATA max UDMA/133 abar m2048@0xfa921000 port 0xfa921380 irq 45
ahci 0000:09:00.0: controller can do FBS, turning on CAP_FBS
ahci 0000:09:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:09:00.0: flags: 64bit ncq fbs pio
scsi host7: ahci
scsi host8: ahci
scsi host9: ahci
scsi host10: ahci
scsi host11: ahci
scsi host12: ahci
scsi host13: ahci
scsi host14: ahci
ata7: SATA max UDMA/133 abar m2048@0xfa510000 port 0xfa510100 irq 52
ata8: SATA max UDMA/133 abar m2048@0xfa510000 port 0xfa510180 irq 52
ata9: SATA max UDMA/133 abar m2048@0xfa510000 port 0xfa510200 irq 52
ata10: SATA max UDMA/133 abar m2048@0xfa510000 port 0xfa510280 irq 52
ata11: SATA max UDMA/133 abar m2048@0xfa510000 port 0xfa510300 irq 52
ata12: SATA max UDMA/133 abar m2048@0xfa510000 port 0xfa510380 irq 52
ata13: SATA max UDMA/133 abar m2048@0xfa510000 port 0xfa510400 irq 52
ata14: SATA max UDMA/133 abar m2048@0xfa510000 port 0xfa510480 irq 52
e1000e 0000:08:00.0 eth0: registered PHC clock
e1000e 0000:08:00.0 eth0: (PCI Express:2.5GT/s:Width x1) d0:50:99:c0:fa:87
e1000e 0000:08:00.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:08:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
e1000e 0000:0a:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
usb 3-1: new high-speed USB device number 2 using ehci-pci
usb 4-1: new high-speed USB device number 2 using ehci-pci
e1000e 0000:0a:00.0 eth1: registered PHC clock
e1000e 0000:0a:00.0 eth1: (PCI Express:2.5GT/s:Width x1) d0:50:99:c0:fa:88
e1000e 0000:0a:00.0 eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:0a:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
e1000e 0000:0a:00.0 enp10s0: renamed from eth1
e1000e 0000:08:00.0 enp8s0: renamed from eth0
usb 3-1: New USB device found, idVendor=8087, idProduct=0024
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 6 ports detected
usb 4-1: New USB device found, idVendor=8087, idProduct=0024
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 8 ports detected
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata13: SATA link down (SStatus 0 SControl 300)
ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata11: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata12: SATA link down (SStatus 0 SControl 300)
ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
ata14.00: configured for UDMA/66
ata8: SATA link down (SStatus 0 SControl 300)
usb 3-1.5: new high-speed USB device number 3 using ehci-pci
usb 4-1.3: new high-speed USB device number 3 using ehci-pci
usb 3-1.5: New USB device found, idVendor=05e3, idProduct=0736
usb 3-1.5: New USB device strings: Mfr=3, Product=4, SerialNumber=2
usb 3-1.5: Product: USB Storage
usb 3-1.5: Manufacturer: Generic
usb 3-1.5: SerialNumber: 000000000272
usb-storage 3-1.5:1.0: USB Mass Storage device detected
scsi host15: usb-storage 3-1.5:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
usb 4-1.3: New USB device found, idVendor=05e3, idProduct=0608
usb 4-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 4-1.3: Product: USB2.0 Hub
hub 4-1.3:1.0: USB hub found
hub 4-1.3:1.0: 4 ports detected
usb 4-1.4: new full-speed USB device number 4 using ehci-pci
tsc: Refined TSC clocksource calibration: 2599.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a3b2ad7e, max_idle_ns: 440795282337 ns
usb 4-1.4: New USB device found, idVendor=046d, idProduct=c24e
usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-1.4: Product: G500s Laser Gaming Mouse
usb 4-1.4: Manufacturer: Logitech
usb 4-1.4: SerialNumber: 9D80E8DCC80009
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech G500s Laser Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.4/4-1.4:1.0/0003:046D:C24E.0001/input/input3
hid-generic 0003:046D:C24E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech G500s Laser Gaming Mouse] on usb-0000:00:1d.0-1.4/input0
input: Logitech G500s Laser Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.4/4-1.4:1.1/0003:046D:C24E.0002/input/input4
hid-generic 0003:046D:C24E.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech G500s Laser Gaming Mouse] on usb-0000:00:1d.0-1.4/input1
usb 4-1.7: new high-speed USB device number 5 using ehci-pci
usb 4-1.7: New USB device found, idVendor=046b, idProduct=ff01
usb 4-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-1.7: Product: Virtual Hub
usb 4-1.7: Manufacturer: American Megatrends Inc.
usb 4-1.7: SerialNumber: serial
hub 4-1.7:1.0: USB hub found
hub 4-1.7:1.0: 5 ports detected
usb 4-1.7.4: new low-speed USB device number 6 using ehci-pci
usb 4-1.7.4: New USB device found, idVendor=046b, idProduct=ff10
usb 4-1.7.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1.7.4: Product: Virtual Keyboard and Mouse
usb 4-1.7.4: Manufacturer: American Megatrends Inc.
input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.7/4-1.7.4/4-1.7.4:1.0/0003:046B:FF10.0003/input/input5
hid-generic 0003:046B:FF10.0003: input,hidraw2: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1d.0-1.7.4/input0
input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.7/4-1.7.4/4-1.7.4:1.1/0003:046B:FF10.0004/input/input6
hid-generic 0003:046B:FF10.0004: input,hidraw3: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1d.0-1.7.4/input1
sas: phy-0:1 added to port-0:0, phy_mask:0x2 (ffffffff00000000)
sas: phy-0:3 added to port-0:1, phy_mask:0x8 (ffffffff00000002)
sas: DOING DISCOVERY on port 0, pid:279
sas: DONE DISCOVERY on port 0, pid:279, result:0
sas: DOING DISCOVERY on port 1, pid:279
sas: DONE DISCOVERY on port 1, pid:279, result:0
sas: Enter sas_scsi_recover_host busy: 0 failed: 0
sas: ata15: end_device-0:0: dev error handler
scsi 15:0:0:0: Direct-Access Generic STORAGE DEVICE 0272 PQ: 0 ANSI: 0
ata15.00: ATA-7: PATRIOT MEMORY 32GB SSD, 02.10104, max UDMA/100
ata15.00: 62533296 sectors, multi 1: LBA
ata15.00: configured for UDMA/100
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
scsi 0:0:0:0: Direct-Access ATA PATRIOT MEMORY 3 0104 PQ: 0 ANSI: 5
sas: Enter sas_scsi_recover_host busy: 0 failed: 0
sas: ata15: end_device-0:0: dev error handler
sas: ata16: end_device-0:1: dev error handler
clocksource: Switched to clocksource tsc
ata16.00: supports DRM functions and may not be fully accessible
ata16.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT02B6Q, max UDMA/133
ata16.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata16.00: supports DRM functions and may not be fully accessible
ata16.00: configured for UDMA/133
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
scsi 0:0:1:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: Attached scsi generic sg1 type 0
sd 0:0:1:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sda: sda1 sda2
scsi: waiting for bus probes to complete ...
sd 15:0:0:0: Attached scsi generic sg2 type 0
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 14:0:0:0: Processor Marvell Console 1.01 PQ: 0 ANSI: 5
scsi 14:0:0:0: Attached scsi generic sg3 type 3
sd 0:0:1:0: [sdb] Attached SCSI disk
sd 15:0:0:0: [sdc] 15548416 512-byte logical blocks: (7.96 GB/7.41 GiB)
sd 15:0:0:0: [sdc] Write Protect is off
sd 15:0:0:0: [sdc] Mode Sense: 0b 00 00 08
sd 15:0:0:0: [sdc] No Caching mode page found
sd 15:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 15:0:0:0: [sdc] Attached SCSI removable disk
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: RTC configured in localtime, applying delta of -420 minutes to system time.
systemd[1]: Failed to insert module 'kdbus': Function not implemented
systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice Root Slice.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Reached target Slices.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Started Braille Device Support.
systemd[1]: Mounting Debug File System...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Started Journal Service.
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
systemd-journald[385]: Received request to flush runtime journal from PID 1
ipmi message handler version 39.2
dca service started, version 1.12.1
IPMI System Interface driver.
ipmi_si: probing via ACPI
ipmi_si 00:09: [io 0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ioatdma: Intel(R) QuickData Technology Driver 4.00
mei_me 0000:00:16.0: Device doesn't have valid ME Interface
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
wmi: Mapper loaded
EDAC MC: Ver: 3.0.0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC MC0: Giving out device to module sbridge_edac.c controller Sandy Bridge Socket#0: DEV 0000:ff:0e.0 (POLLED)
EDAC sbridge: Ver: 1.1.1
[drm] Initialized drm 1.1.0 20060810
sas: Enter sas_scsi_recover_host busy: 1 failed: 1
sas: ata16: end_device-0:1: cmd error handler
sas: ata15: end_device-0:0: dev error handler
sas: ata16: end_device-0:1: dev error handler
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
snd_hda_intel 0000:03:00.1: Disabling MSI
snd_hda_intel 0000:03:00.1: Handle VGA-switcheroo audio client
ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2872, rev 0202 detected
ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0003 detected
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
rt2800pci 0000:04:00.0 wlp4s0: renamed from wlan0
ipmi_si 00:09: Found new BMC (man_id: 0x000000, prod_id: 0xaabb, dev_id: 0x20)
ipmi_si 00:09: IPMI kcs interface initialized
IPMI SSIF Interface driver
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:03:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 352.63 Sat Nov 7 21:25:42 PST 2015
Adding 7999484k swap on /dev/sda1. Priority:-1 extents:1 across:7999484k SSFS
audit: type=1400 audit(1464721339.587:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=659 comm="apparmor_parser"
audit: type=1400 audit(1464721339.587:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=659 comm="apparmor_parser"
audit: type=1400 audit(1464721339.591:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=659 comm="apparmor_parser"
audit: type=1400 audit(1464721339.591:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=659 comm="apparmor_parser"
audit: type=1400 audit(1464721339.591:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=659 comm="apparmor_parser"
audit: type=1400 audit(1464721339.591:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=659 comm="apparmor_parser"
audit: type=1400 audit(1464721339.615:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=659 comm="apparmor_parser"
audit: type=1400 audit(1464721339.615:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=659 comm="apparmor_parser"
audit: type=1400 audit(1464721339.615:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=659 comm="apparmor_parser"
cgroup: new mount options do not match the existing superblock, will be ignored
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card0/input7
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card0/input8
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card0/input9
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card0/input10
random: nonblocking pool is initialized
IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'
ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.34
IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp10s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp10s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
EXT4-fs (sdb): mounted filesystem with ordered data mode. Opts: (null)
wlp4s0: authenticate with 28:c6:8e:15:05:86
wlp4s0: send auth to 28:c6:8e:15:05:86 (try 1/3)
wlp4s0: authenticated
wlp4s0: associate with 28:c6:8e:15:05:86 (try 1/3)
wlp4s0: RX AssocResp from 28:c6:8e:15:05:86 (capab=0x431 status=0 aid=3)
wlp4s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
usb 4-1.3.2: new full-speed USB device number 7 using ehci-pci
usb 4-1.3.2: New USB device found, idVendor=054c, idProduct=0994
usb 4-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1.3.2: Product: USB Charger
usb 4-1.3.2: Manufacturer: Sony
input: Sony USB Charger as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3.2/4-1.3.2:1.0/0003:054C:0994.0005/input/input11
hid-generic 0003:054C:0994.0005: input,hidraw4: USB HID v1.11 Device [Sony USB Charger] on usb-0000:00:1d.0-1.3.2/input0
usb 4-1.3.2: USB disconnect, device number 7
usb 4-1.3.2: new full-speed USB device number 8 using ehci-pci
usb 4-1.3.2: New USB device found, idVendor=054c, idProduct=0994
usb 4-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1.3.2: Product: USB Charger
usb 4-1.3.2: Manufacturer: Sony
input: Sony USB Charger as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3.2/4-1.3.2:1.0/0003:054C:0994.0006/input/input12
hid-generic 0003:054C:0994.0006: input,hidraw4: USB HID v1.11 Device [Sony USB Charger] on usb-0000:00:1d.0-1.3.2/input0
usb 4-1.3.2: USB disconnect, device number 8
usb 4-1.3.2: new high-speed USB device number 9 using ehci-pci
usb 4-1.3.2: New USB device found, idVendor=054c, idProduct=07c4
usb 4-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-1.3.2: Product: ILCE-6000
usb 4-1.3.2: Manufacturer: Sony
usb 4-1.3.2: SerialNumber: C9D560360C0B
usb-storage 4-1.3.2:1.0: USB Mass Storage device detected
scsi host16: usb-storage 4-1.3.2:1.0
scsi 16:0:0:0: Direct-Access Sony DSC 1.00 PQ: 0 ANSI: 0
scsi 16:0:0:1: Direct-Access Sony DSC 1.00 PQ: 0 ANSI: 0
sd 16:0:0:0: Attached scsi generic sg4 type 0
sd 16:0:0:1: Attached scsi generic sg5 type 0
sd 16:0:0:0: [sdd] 62552064 512-byte logical blocks: (32.0 GB/29.8 GiB)
sd 16:0:0:1: [sde] 2048 512-byte logical blocks: (1.04 MB/1.00 MiB)
sd 16:0:0:0: [sdd] Write Protect is off
sd 16:0:0:0: [sdd] Mode Sense: 03 00 00 00
sd 16:0:0:1: [sde] Write Protect is on
sd 16:0:0:1: [sde] Mode Sense: 03 00 80 00
sd 16:0:0:0: [sdd] No Caching mode page found
sd 16:0:0:0: [sdd] Assuming drive cache: write through
sd 16:0:0:1: [sde] No Caching mode page found
sd 16:0:0:1: [sde] Assuming drive cache: write through
sdd: sdd1
sde: sde1
sd 16:0:0:0: [sdd] Attached SCSI removable disk
sd 16:0:0:1: [sde] Attached SCSI removable disk
EXT4-fs (sdb): mounted filesystem with ordered data mode. Opts: (null)
perf interrupt took too long (2510 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
wlp4s0: authenticate with 28:c6:8e:15:05:86
wlp4s0: send auth to 28:c6:8e:15:05:86 (try 1/3)
wlp4s0: authenticated
wlp4s0: associate with 28:c6:8e:15:05:86 (try 1/3)
wlp4s0: RX AssocResp from 28:c6:8e:15:05:86 (capab=0x431 status=0 aid=3)
wlp4s0: associated