dmesg - 1

Return To 1 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.6-archermind-standard+ (root@archermind-HP-EliteDesk-880-G1-TWR) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP Thu May 19 04:29:30 CST 2016
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x000000007b62bfff] usable
BIOS-e820: [mem 0x000000007b62c000-0x000000007b65bfff] reserved
BIOS-e820: [mem 0x000000007b65c000-0x000000007b680fff] usable
BIOS-e820: [mem 0x000000007b681000-0x000000007b765fff] ACPI NVS
BIOS-e820: [mem 0x000000007b766000-0x000000007ba1afff] reserved
BIOS-e820: [mem 0x000000007ba1b000-0x000000007ba71fff] type 20
BIOS-e820: [mem 0x000000007ba72000-0x000000007ba76fff] usable
BIOS-e820: [mem 0x000000007ba77000-0x000000007ba77fff] reserved
BIOS-e820: [mem 0x000000007ba78000-0x000000007ba7afff] usable
BIOS-e820: [mem 0x000000007ba7b000-0x000000007ba7bfff] reserved
BIOS-e820: [mem 0x000000007ba7c000-0x000000007bffffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed06000-0x00000000fed06fff] reserved
BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
efi: EFI v2.40 by American Megatrends
efi:  ESRT=0x7b65a000  ACPI=0x7b6c5000  ACPI 2.0=0x7b6c5000  SMBIOS=0x7ba19118 
efi: requested map not found.
esrt: ESRT header is not in the memory map.
SMBIOS 2.8 present.
DMI: To be filled by O.E.M. To be filled by O.E.M./Cherry Trail CR, BIOS T09011 03/10/2016
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x7c000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 07E000000 mask FFE000000 uncachable
  2 base 07D000000 mask FFF000000 uncachable
  3 base 07C800000 mask FFF800000 uncachable
  4 base 07C400000 mask FFFC00000 uncachable
  5 disabled
  6 disabled
  7 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
BRK [0x02f89000, 0x02f89fff] PGTABLE
BRK [0x02f8a000, 0x02f8afff] PGTABLE
BRK [0x02f8b000, 0x02f8bfff] PGTABLE
BRK [0x02f8c000, 0x02f8cfff] PGTABLE
BRK [0x02f8d000, 0x02f8dfff] PGTABLE
BRK [0x02f8e000, 0x02f8efff] PGTABLE
RAMDISK: [mem 0x3797e000-0x37cb6fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000007B6C5000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000007B6C50A8 0000CC (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x000000007B6E0418 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x000000007B6C5208 01B20C (v02 ALASKA A M I    01072009 INTL 20120913)
ACPI: FACS 0x000000007B765F80 000040
ACPI: APIC 0x000000007B6E0528 000084 (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x000000007B6E05B0 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FIDT 0x000000007B6E05F8 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: MCFG 0x000000007B6E0698 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
ACPI: SSDT 0x000000007B6E06D8 0041D2 (v01 DptfTb DptfTab  00001000 INTL 20120913)
ACPI: SSDT 0x000000007B6E48B0 00050C (v01 CpuDpf CpuDptf  00001000 INTL 20120913)
ACPI: SSDT 0x000000007B6E4DC0 000058 (v01 LowPM  LowPwrM  00001000 INTL 20120913)
ACPI: UEFI 0x000000007B6E4E18 000042 (v01 ALASKA A M I    00000000      00000000)
ACPI: HPET 0x000000007B6E4E60 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
ACPI: SSDT 0x000000007B6E4E98 000763 (v01 PmRef  CpuPm    00003000 INTL 20120913)
ACPI: SSDT 0x000000007B6E5600 000292 (v01 PmRef  Cpu0Tst  00003000 INTL 20120913)
ACPI: SSDT 0x000000007B6E5898 00017A (v01 PmRef  ApTst    00003000 INTL 20120913)
ACPI: SSDT 0x000000007B6E5A18 00043A (v01 Intel_ Tpm2Tabl 00001000 INTL 20120913)
ACPI: TPM2 0x000000007B6E5E58 000034 (v03                 00000000      00000000)
ACPI: LPIT 0x000000007B6E5E90 000104 (v01 ALASKA A M I    00000005 MSFT 0100000D)
ACPI: BCFG 0x000000007B6E5F98 000139 (v01 INTEL  BATTCONF 00000001 INTL 00000000)
ACPI: PRAM 0x000000007B6E60D8 000030 (v01                 00000001      00000000)
ACPI: BGRT 0x000000007B6E6108 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: CSRT 0x000000007B6E6140 00014C (v00 INTEL  LANFORDC 00000005 MSFT 0100000D)
ACPI: WDAT 0x000000007B6E6290 000104 (v01                 00000000      00000000)
ACPI: Local APIC address 0xfee00000
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x000000007bffffff]
  Normal   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000008efff]
  node   0: [mem 0x0000000000090000-0x000000000009dfff]
  node   0: [mem 0x0000000000100000-0x000000001fffffff]
  node   0: [mem 0x0000000020200000-0x000000007b62bfff]
  node   0: [mem 0x000000007b65c000-0x000000007b680fff]
  node   0: [mem 0x000000007ba72000-0x000000007ba76fff]
  node   0: [mem 0x000000007ba78000-0x000000007ba7afff]
  node   0: [mem 0x000000007ba7c000-0x000000007bffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000007bffffff]
On node 0 totalpages: 506233
  DMA zone: 64 pages used for memmap
  DMA zone: 22 pages reserved
  DMA zone: 3996 pages, LIFO batch:0
  DMA32 zone: 7872 pages used for memmap
  DMA32 zone: 502237 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0x7cc00000-0x7ebfffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
e820: [mem 0x7ec00000-0xdfffffff] available for PCI devices
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 32 pages/cpu @ffff88007b200000 s90520 r8192 d32360 u524288
pcpu-alloc: s90520 r8192 d32360 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 498275
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Memory: 1915588K/2024932K available (10309K kernel code, 1201K rwdata, 4272K rodata, 1320K init, 1052K bss, 109344K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 64.
	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:4352 nr_irqs:1024 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 1439.943 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 2879.88 BogoMIPS (lpj=1439943)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 8 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys debug
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
Freeing SMP alternatives memory: 36K (ffffffff82478000 - ffffffff82481000)
ftrace: allocating 36870 entries in 145 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Atom(TM) x5-Z8300  CPU @ 1.44GHz (family: 0x6, model: 0x4c, stepping: 0x3)
Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
... version:                3
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000ffffffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (11519.54 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x7b681000-0x7b765fff] (937984 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
xor: measuring software checksum speed
   prefetch64-sse:  4876.000 MB/sec
   generic_sse:  4368.000 MB/sec
xor: using function: prefetch64-sse (4876.000 MB/sec)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
vlv2_plat_clk_init : 258
vlv2_plat_clk_probe : LINE 192
vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
dca service started, version 1.12.1
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!)
PCI: Using configuration type 1 for base access
raid6: sse2x1   gen()   660 MB/s
raid6: sse2x1   xor()  1548 MB/s
raid6: sse2x2   gen()  1054 MB/s
raid6: sse2x2   xor()  1714 MB/s
raid6: sse2x4   gen()  1664 MB/s
raid6: sse2x4   xor()  1720 MB/s
raid6: using algorithm sse2x4 gen() 1664 MB/s
raid6: .... xor() 1720 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88007ABB1000 00057B (v01 PmRef  Cpu0Ist  00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88007ABAB800 0003A5 (v01 PmRef  Cpu0Cst  00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88007ABD3200 00015F (v01 PmRef  ApIst    00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88007ABACCC0 00008D (v01 PmRef  ApCst    00003000 INTL 20120913)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150930/hwxface-580)
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [P06X] (off)
ACPI: Power Resource [ID3C] (on)
ACPI: Power Resource [USBC] (on)
ACPI: Power Resource [WWPR] (off)
ACPI: Power Resource [WWPR] (off)
ACPI: Power Resource [WWPR] (off)
ACPI: Power Resource [WWPR] (off)
ACPI: Power Resource [WWPR] (off)
ACPI: Power Resource [WWPR] (off)
ACPI: Power Resource [CLK3] (off)
ACPI: Power Resource [CLK4] (off)
ACPI: Power Resource [CLK2] (off)
ACPI: Power Resource [CLK1] (off)
ACPI: Power Resource [CLK0] (off)
ACPI: Power Resource [CLK1] (off)
ACPI: Power Resource [P19X] (off)
ACPI: Power Resource [P28X] (off)
ACPI: Power Resource [P18X] (off)
ACPI: Power Resource [P12X] (off)
ACPI: Power Resource [P28P] (off)
ACPI: Power Resource [P18P] (off)
ACPI: Power Resource [P28T] (off)
ACPI: Power Resource [P18D] (off)
ACPI: Power Resource [P18T] (off)
ACPI: Power Resource [P3P3] (off)
ACPI: Power Resource [P12T] (off)
ACPI: Power Resource [P28W] (off)
ACPI: Power Resource [P18W] (off)
ACPI: Power Resource [P12W] (off)
ACPI: Power Resource [P33W] (off)
ACPI: Power Resource [P33X] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x20000000-0x201fffff window]
pci_bus 0000:00: root bus resource [mem 0x7cc00001-0x7ec00000 window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
pci 0000:00:02.0: [8086:22b0] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
pci 0000:00:0b.0: [8086:22dc] type 00 class 0x118000
pci 0000:00:0b.0: reg 0x10: [mem 0x9153b000-0x9153bfff 64bit]
pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0x91500000-0x9150ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
pci 0000:00:1a.0: reg 0x10: [mem 0x91300000-0x913fffff]
pci 0000:00:1a.0: reg 0x14: [mem 0x91200000-0x912fffff]
pci 0000:00:1a.0: PME# supported from D0 D3hot
pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
pci 0000:01:00.0: [8086:3165] type 00 class 0x028000
pci 0000:01:00.0: reg 0x10: [mem 0x91400000-0x91401fff 64bit]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0:   bridge window [mem 0x91400000-0x914fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
Advanced Linux Sound Architecture Driver Initialized.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x7b62c000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7b681000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7ba77000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7ba7b000-0x7bffffff]
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [io  0x0680-0x069f] has been reserved
system 00:00: [io  0x0400-0x047f] has been reserved
system 00:00: [io  0x0500-0x05fe] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:02: [mem 0x91539000-0x91539fff] has been reserved
system 00:02: [mem 0x91537000-0x91537fff] has been reserved
system 00:02: [mem 0x91535000-0x91535fff] has been reserved
system 00:02: [mem 0x91524000-0x91524fff] has been reserved
system 00:02: [mem 0x91522000-0x91522fff] has been reserved
system 00:02: [mem 0x91520000-0x91520fff] has been reserved
system 00:02: [mem 0x9151e000-0x9151efff] has been reserved
system 00:02: [mem 0x9151c000-0x9151cfff] has been reserved
system 00:02: [mem 0x9151a000-0x9151afff] has been reserved
system 00:02: [mem 0x91518000-0x91518fff] has been reserved
system 00:02: [mem 0x91533000-0x91533fff] has been reserved
system 00:02: [mem 0x91531000-0x91531fff] has been reserved
system 00:02: [mem 0x9152f000-0x9152ffff] has been reserved
system 00:02: [mem 0x9152d000-0x9152dfff] has been reserved
system 00:02: [mem 0x9152b000-0x9152bfff] has been reserved
system 00:02: [mem 0x91529000-0x91529fff] has been reserved
system 00:02: [mem 0x91527000-0x91527fff] has been reserved
system 00:02: [mem 0x91525000-0x91525fff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved
system 00:03: [mem 0xfea00000-0xfeafffff] has been reserved
system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
system 00:03: [mem 0xfed06000-0xfed06fff] has been reserved
system 00:03: [mem 0xfed08000-0xfed09fff] has been reserved
system 00:03: [mem 0xfed80000-0xfedbffff] could not be reserved
system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0:   bridge window [mem 0x91400000-0x914fffff]
pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
pci_bus 0000:00: resource 11 [mem 0x20000000-0x201fffff window]
pci_bus 0000:00: resource 12 [mem 0x7cc00001-0x7ec00000 window]
pci_bus 0000:00: resource 13 [mem 0x80000000-0xdfffffff window]
pci_bus 0000:01: resource 1 [mem 0x91400000-0x914fffff]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 3300K (ffff88003797e000 - ffff880037cb7000)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
HugeTLB registered 2 MB page size, pre-allocated 0 pages
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
efifb: probing for efifb
efifb: framebuffer at 0x80000000, mapped to 0xffffc90001000000, using 9024k, total 9024k
efifb: mode is 1920x1200x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x75
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x33000020
intel_idle: v0.4 model 0x4C
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [ADP1] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input2
ACPI: Sleep Button [SLPF]
ACPI Error: Could not enable SleepButton event (20150930/evxfevnt-212)
ACPI Warning: Could not enable fixed event - SleepButton (3) (20150930/evxface-654)
button: probe of LNXSLPBN:00 failed with error -22
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (0 C)
INFO_MDMA: LNW DMA Driver Version 1.1.0
intel_mid_dma_acpi: dma_acpi_probe for INTL9C60
mid_get_acpi_driver_data[    0.764771] intel_mid_dma_acpi: mid_platform_get_resources_lpio
intel_mid_dma_acpi: rsrc #0 = 0x91510000
intel_mid_dma_acpi: dma_base:ffffc900000c8000
intel_mid_dma_acpi: irq from pdev is:42
MDMA:Adding 6 channel for this controller
MDMA:Init CH 0, ID 0
MDMA:Init CH 1, ID 1
MDMA:Init CH 2, ID 2
MDMA:Init CH 3, ID 3
MDMA:Init CH 4, ID 4
MDMA:Init CH 5, ID 5
MDMA: Calc Mask as 3f for this controller
MDMA:Requesting irq for DMAC2
setting up tasklet2 for DMAC2
intel_mid_dma_acpi: dma_acpi_probe:completed
MDMA: dma_suspend called
intel_mid_dma_acpi: dma_acpi_probe for INTL9C60
mid_get_acpi_driver_data[    0.765302] intel_mid_dma_acpi: mid_platform_get_resources_lpio
intel_mid_dma_acpi: rsrc #0 = 0x91514000
intel_mid_dma_acpi: dma_base:ffffc900000d0000
intel_mid_dma_acpi: irq from pdev is:43
MDMA:Adding 6 channel for this controller
MDMA:Init CH 0, ID 0
MDMA:Init CH 1, ID 1
MDMA:Init CH 2, ID 2
MDMA:Init CH 3, ID 3
MDMA:Init CH 4, ID 4
MDMA:Init CH 5, ID 5
MDMA: Calc Mask as 3f for this controller
MDMA:Requesting irq for DMAC2
setting up tasklet2 for DMAC2
intel_mid_dma_acpi: dma_acpi_probe:completed
MDMA: dma_suspend called
ioatdma: Intel(R) QuickData Technology Driver 4.00
00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
8086228A:00: ttyS1 at MMIO 0x91521000 (irq = 39, base_baud = 2764800) is a 16550A
8086228A:01: ttyS2 at MMIO 0x9151f000 (irq = 40, base_baud = 2764800) is a 16550A
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
[drm] Memory usable by graphics device = 2048M
checking generic (80000000 8d0000) vs hw (80000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] failed to retrieve link info, disabling eDP
[drm] hdmi port 3, ddc_bus 3, hpd_pin 7
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
acpi device:01: registered as cooling_device4
acpi device:02: registered as cooling_device5
acpi device:03: registered as cooling_device6
acpi device:04: registered as cooling_device7
acpi device:05: registered as cooling_device8
acpi device:06: registered as cooling_device9
acpi device:07: registered as cooling_device10
acpi device:08: registered as cooling_device11
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ide-cd driver 5.00
pcnet32: pcnet32.c:v1.35 21.Apr.2008 [email protected]
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
usbcore: registered new interface driver kaweth
pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new interface driver pegasus
usbcore: registered new interface driver rtl8150
usbcore: registered new interface driver asix
usbcore: registered new interface driver ax88179_178a
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver dm9601
usbcore: registered new interface driver smsc75xx
usbcore: registered new interface driver smsc95xx
usbcore: registered new interface driver net1080
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver MOSCHIP usb-ethernet driver
usbcore: registered new interface driver int51x1
usbcore: registered new interface driver cdc_ncm
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
tsc: Refined TSC clocksource calibration: 1439.953 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x14c18e756e4, max_idle_ns: 440795259570 ns
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 7 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
usb: port power management may be unreliable
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbcore: registered new interface driver ftdi_sio
usbcore: registered new interface driver pl2303
i8042: PNP: No PS/2 controller found. Probing ports directly.
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x75
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i8042: Can't read CTR while initializing i8042
i8042: probe of i8042 failed with error -5
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
usbcore: registered new interface driver cx231xx
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Braswell SoC TCO device (Version=3, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: multipath personality registered for level -4
md: faulty personality registered for level -5
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: [email protected]
Intel P-state driver initializing.
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-acpi 80860F14:00: No vmmc regulator found
sdhci-acpi 80860F14:00: No vqmmc regulator found
mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
sdhci-acpi 80860F14:03: No vmmc regulator found
sdhci-acpi 80860F14:03: No vqmmc regulator found
mmc1: SDHCI controller on ACPI [80860F14:03] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
oprofile: using NMI interrupt.
u32 classifier
    Actions configured
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 36
Key type dns_resolver registered
microcode: CPU0 sig=0x406c3, pf=0x1, revision=0x35e
microcode: CPU1 sig=0x406c3, pf=0x1, revision=0x35e
microcode: CPU2 sig=0x406c3, pf=0x1, revision=0x35e
microcode: CPU3 sig=0x406c3, pf=0x1, revision=0x35e
microcode: Microcode Update Driver: v2.01 , Peter Oruba
SSE version of gcm_enc/dec engaged.
Btrfs loaded
console [netcon0] enabled
netconsole: network logging started
rtc_cmos 00:04: setting system clock to 2016-05-23 06:55:27 UTC (1463986527)
had: Vidya: Enter alsa_card_intelhad_init
had: ******** HAD DRIVER loading..*** Ver: 0.01.003
[drm:mid_hdmi_audio_setup] *ERROR* mid_hdmi_audio_setup: called
[drm:mid_hdmi_audio_register] *ERROR* mid_hdmi_audio_register: called
[drm] mid_hdmi_audio_register: Scheduling HDMI audio work queue
[drm:hdmi_audio_get_caps] *ERROR* 
had: init complete retval=0
ALSA device list:
  #0: 
Freeing unused kernel memory: 1320K (ffffffff8232e000 - ffffffff82478000)
Write protecting the kernel read-only data: 18432k
Freeing unused kernel memory: 1968K (ffff880002414000 - ffff880002600000)
Freeing unused kernel memory: 1872K (ffff880002a2c000 - ffff880002c00000)
systemd-udevd[127]: starting version 204
mmc0: MAN_BKOPS_EN bit is not set
mmc0: new HS200 MMC card at address 0001
mmcblk0: mmc0:0001 032G72 29.1 GiB 
mmcblk0boot0: mmc0:0001 032G72 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 032G72 partition 2 4.00 MiB
mmcblk0rpmb: mmc0:0001 032G72 partition 3 4.00 MiB
 mmcblk0: p1 p2 p3
usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
usb 1-1: new high-speed USB device number 2 using xhci_hcd
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
clocksource: Switched to clocksource tsc
usb 1-4: new full-speed USB device number 3 using xhci_hcd
usb 1-1.1: new high-speed USB device number 4 using xhci_hcd
random: init urandom read with 31 bits of entropy available
usb 1-1.1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
usb 1-1.1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host0: usb-storage 1-1.1:1.0
init: plymouth-upstart-bridge main process (197) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
usb 1-1.3: new low-speed USB device number 5 using xhci_hcd
init: plymouth-upstart-bridge main process (207) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: ureadahead main process (200) terminated with status 5
init: plymouth-upstart-bridge main process (210) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
usb 1-1.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-1.3: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
i2c_designware 808622C1:06: controller timed out
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C31C.0001/input/input4
hid-generic 0003:046D:C31C.0001: input: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-1.3/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C31C.0002/input/input5
hid-generic 0003:046D:C31C.0002: input: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-1.3/input1
Adding 2024444k swap on /dev/mmcblk0p3.  Priority:-1 extents:1 across:2024444k SS
EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
usb 1-1.4: new low-speed USB device number 6 using xhci_hcd
usb 1-1.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:093A:2510.0003/input/input6
hid-generic 0003:093A:2510.0003: input: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-1.4/input0
systemd-udevd[342]: starting version 204
lp: driver loaded but no devices found
proc_thermal 0000:00:0b.0: enabling device (0000 -> 0002)
fuse init (API version 7.23)
pxa2xx-spi 8086228E:00: found DMA channel "tx" at index 0
pxa2xx-spi 8086228E:01: found DMA channel "tx" at index 0
pxa2xx-spi 8086228E:02: found DMA channel "tx" at index 0
snd_intel_sst: sst_acpi_probe : LINE 564
------------[ cut here ]------------
WARNING: CPU: 0 PID: 398 at /work/jenkins/workspace/ubuntu_build/ubuntu/linux-kernel/fs/sysfs/dir.c:31 sysfs_warn_dup+0x6f/0x90()
sysfs: cannot create duplicate filename '/devices/platform/hdmi-audio'
Modules linked in: snd_intel_sst(+) snd_soc_sst_platform pwm_lpss_platform pwm_lpss spi_pxa2xx_platform fuse int3400_thermal int3403_thermal acpi_thermal_rel parport_pc processor_thermal_device int340x_thermal_zone intel_soc_dts_iosf iosf_mbi lp parport
CPU: 0 PID: 398 Comm: systemd-udevd Not tainted 4.4.6-archermind-standard+ #1
Hardware name: To be filled by O.E.M. To be filled by O.E.M./Cherry Trail CR, BIOS T09011 03/10/2016
 0000000000000000 ffff88000005b878 ffffffff813de6b1 ffff88000005b8c8
 000000000000001f ffff88000005b8b8 ffffffff81077047 ffff88007a827690
 ffff880078f51000 ffff880079416090 ffff88007a917708 ffffffff822bbb80
Call Trace:
 [] dump_stack+0x4d/0x6c
 [] warn_slowpath_common+0x97/0xe0
 [] warn_slowpath_fmt+0x46/0x50
 [] ? kernfs_path+0x55/0x70
 [] sysfs_warn_dup+0x6f/0x90
 [] sysfs_create_dir_ns+0x7c/0x90
 [] kobject_add_internal+0xa8/0x2d0
 [] kobject_add+0x67/0xc0
 [] ? device_private_init+0x27/0x80
 [] device_add+0xdf/0x570
 [] platform_device_add+0x103/0x230
 [] platform_device_register+0x2a/0x40
 [] ? ida_get_new_above+0x1fe/0x250
 [] sst_acpi_probe+0x62/0x6c0 [snd_intel_sst]
 [] ? acpi_dev_pm_attach+0x8f/0xae
 [] ? ida_get_new_above+0x1fe/0x250
 [] platform_drv_probe+0x42/0x90
 [] ? devices_kset_move_last+0x26/0x70
 [] driver_probe_device+0x1ad/0x2c0
 [] __driver_attach+0x9d/0xa0
 [] ? driver_probe_device+0x2c0/0x2c0
 [] bus_for_each_dev+0x5b/0x90
 [] driver_attach+0x1e/0x20
 [] bus_add_driver+0x11d/0x230
 [] driver_register+0x60/0xe0
 [] ? trace_event_define_fields_sst_ipc+0xc7/0xc7 [snd_intel_sst]
 [] __platform_driver_register+0x36/0x40
 [] intel_sst_init+0x60/0x7b [snd_intel_sst]
 [] ? trace_event_define_fields_sst_ipc+0xc7/0xc7 [snd_intel_sst]
 [] do_one_initcall+0x86/0x1b0
 [] ? kmem_cache_alloc_trace+0xec/0x1f0
 [] ? do_init_module+0x2b/0x200
 [] do_init_module+0x64/0x200
 [] load_module+0x1212/0x17a0
 [] ? show_initstate+0x50/0x50
 [] SYSC_finit_module+0x86/0x90
 [] SyS_finit_module+0xe/0x10
 [] entry_SYSCALL_64_fastpath+0x12/0x6a
---[ end trace 70c2f7a5a6d283a9 ]---
------------[ cut here ]------------
WARNING: CPU: 0 PID: 398 at /work/jenkins/workspace/ubuntu_build/ubuntu/linux-kernel/lib/kobject.c:240 kobject_add_internal+0x25d/0x2d0()
kobject_add_internal failed for hdmi-audio with -EEXIST, don't try to register things with the same name in the same directory.
Modules linked in: snd_intel_sst(+) snd_soc_sst_platform pwm_lpss_platform pwm_lpss spi_pxa2xx_platform fuse int3400_thermal int3403_thermal acpi_thermal_rel parport_pc processor_thermal_device int340x_thermal_zone intel_soc_dts_iosf iosf_mbi lp parport
CPU: 0 PID: 398 Comm: systemd-udevd Tainted: G        W       4.4.6-archermind-standard+ #1
Hardware name: To be filled by O.E.M. To be filled by O.E.M./Cherry Trail CR, BIOS T09011 03/10/2016
 0000000000000000 ffff88000005b8d8 ffffffff813de6b1 ffff88000005b928
 00000000000000f0 ffff88000005b918 ffffffff81077047 ffff88000005b918
 00000000ffffffef ffffffffa00e64e0 0000000000000000 ffffffff822bbb80
Call Trace:
 [] dump_stack+0x4d/0x6c
 [] warn_slowpath_common+0x97/0xe0
 [] warn_slowpath_fmt+0x46/0x50
 [] ? sysfs_warn_dup+0x77/0x90
 [] kobject_add_internal+0x25d/0x2d0
 [] kobject_add+0x67/0xc0
 [] ? device_private_init+0x27/0x80
 [] device_add+0xdf/0x570
 [] platform_device_add+0x103/0x230
 [] platform_device_register+0x2a/0x40
 [] ? ida_get_new_above+0x1fe/0x250
 [] sst_acpi_probe+0x62/0x6c0 [snd_intel_sst]
 [] ? acpi_dev_pm_attach+0x8f/0xae
 [] ? ida_get_new_above+0x1fe/0x250
 [] platform_drv_probe+0x42/0x90
 [] ? devices_kset_move_last+0x26/0x70
 [] driver_probe_device+0x1ad/0x2c0
 [] __driver_attach+0x9d/0xa0
 [] ? driver_probe_device+0x2c0/0x2c0
 [] bus_for_each_dev+0x5b/0x90
 [] driver_attach+0x1e/0x20
 [] bus_add_driver+0x11d/0x230
 [] driver_register+0x60/0xe0
 [] ? trace_event_define_fields_sst_ipc+0xc7/0xc7 [snd_intel_sst]
 [] __platform_driver_register+0x36/0x40
 [] intel_sst_init+0x60/0x7b [snd_intel_sst]
 [] ? trace_event_define_fields_sst_ipc+0xc7/0xc7 [snd_intel_sst]
 [] do_one_initcall+0x86/0x1b0
 [] ? kmem_cache_alloc_trace+0xec/0x1f0
 [] ? do_init_module+0x2b/0x200
 [] do_init_module+0x64/0x200
 [] load_module+0x1212/0x17a0
 [] ? show_initstate+0x50/0x50
 [] SYSC_finit_module+0x86/0x90
 [] SyS_finit_module+0xe/0x10
 [] entry_SYSCALL_64_fastpath+0x12/0x6a
---[ end trace 70c2f7a5a6d283aa ]---
snd_intel_sst: sst_acpi_probe : LINE 577
snd_intel_sst: sst_acpi_probe : LINE 584
snd_intel_sst: sst_platform_get_resources_edk
snd_intel_sst: LPE base: 0x91000000 size:0x200000snd_intel_sst: IRAM base: 0x910c0000
snd_intel_sst: DRAM base: 0x91100000snd_intel_sst: SHIM base: 0x91140000
snd_intel_sst: Mailbox base: 0x91144000snd_intel_sst: DDR base: 0x20000000
snd_intel_sst: sst_acpi_probe : LINE 624
snd_intel_sst: sst_acpi_probe : LINE 665
snd_intel_sst: Enter: sst_audio_platform_init
snd_intel_sst: audio:set_cht_platform_config
snd_soc_sst_platform: sst_platform_probe called
snd_soc_sst_platform: sst_platform_probe : LINE 1057
snd_soc_sst_platform: sst_platform_probe is deferred
snd_intel_sst: sst_request_firmware_async : Registering machine device cht_rt5672
snd_intel_sst: sst_request_firmware_async : Requesting FW fw_sst_22a8.bin now...
snd_intel_sst: sst_request_firmware_async : LINE 706, ret=0
snd_intel_sst: sst_request_firmware_async : load firmware fw_sst_22a8.bin successfully msx
snd_intel_sst: sst_acpi_probe : LINE 672
snd_intel_sst: sst_acpi_probe : LINE 680
snd_intel_sst: sst_acpi_probe : LINE 687
snd_intel_sst: sst_acpi_probe : LINE 703
snd_intel_sst: sst_acpi_probe : LINE 712
snd_intel_sst: sst_acpi_probe successfully done!
snd_soc_sst_platform: sst_platform_probe called
snd_soc_sst_platform: sst_platform_probe : LINE 1057
snd_soc_sst_platform: sst_platform_probe is deferred
intel_sst_acpi 808622A8:00: Direct firmware load for fw_sst_22a8.bin failed with error -2
snd_intel_sst: In sst_firmware_load_cb
snd_intel_sst: sst_firmware_load_cb : 1185 request fw failed
snd_soc_sst_platform: sst_platform_probe called
snd_soc_sst_platform: sst_platform_probe : LINE 1057
snd_soc_sst_platform: sst_platform_probe is deferred
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:01:00.0: enabling device (0000 -> 0002)
snd_soc_sst_platform: sst_platform_probe called
snd_soc_sst_platform: sst_platform_probe : LINE 1057
snd_soc_sst_platform: sst_platform_probe is deferred
iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-7265D-19.ucode failed with error -2
iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-7265D-18.ucode failed with error -2
iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-7265D-17.ucode failed with error -2
usbcore: registered new interface driver btusb
snd_soc_sst_platform: sst_platform_probe called
snd_soc_sst_platform: sst_platform_probe : LINE 1057
snd_soc_sst_platform: sst_platform_probe is deferred
Bluetooth: hci0: read Intel version: 370810011003110e00
iwlwifi 0000:01:00.0: loaded firmware version 16.242414.0 op_mode iwlmvm
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
WARNING! power/level is deprecated; use power/control instead
EFI Variables Facility v0.08 2004-May-17
snd_soc_sst_platform: sst_platform_probe called
snd_soc_sst_platform: sst_platform_probe : LINE 1057
snd_soc_sst_platform: sst_platform_probe is deferred
iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 3165, REV=0x210
iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
scsi 0:0:0:0: Direct-Access     hp       v220w            1100 PQ: 0 ANSI: 4
snd_soc_sst_platform: sst_platform_probe called
snd_soc_sst_platform: sst_platform_probe : LINE 1057
snd_soc_sst_platform: sst_platform_probe is deferred
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 63012864 512-byte logical blocks: (32.3 GB/30.0 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1
sd 0:0:0:0: [sda] Attached SCSI removable disk
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Cherrytrail Machine Driver cht_rt5672 registerd
Entry snd_cht_mc_probe
cht_rt5672 cht_rt5672: ASoC: CPU DAI Headset-cpu-dai not registered
snd_soc_register_card failed -517
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
random: nonblocking pool is initialized
iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
init: alsa-restore main process (851) terminated with status 99
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1004) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
[drm:hdmi_audio_get_caps] *ERROR* 
[drm:hdmi_audio_get_caps] *ERROR* 
[drm:hdmi_audio_get_caps] *ERROR* 
[drm:hdmi_audio_get_caps] *ERROR* 
[drm:hdmi_audio_get_caps] *ERROR* 
[drm:hdmi_audio_get_caps] *ERROR* 
[drm:hdmi_audio_get_caps] *ERROR* 
[drm:hdmi_audio_get_caps] *ERROR* 
[drm:hdmi_audio_set_caps] *ERROR* LINE: 276 set_element=8
[drm:hdmi_audio_set_caps] *ERROR* LINE: 276 set_element=6
wlan0: authenticate with d4:68:ba:19:d8:e0
wlan0: send auth to d4:68:ba:19:d8:e0 (try 1/3)
wlan0: send auth to d4:68:ba:19:d8:e0 (try 2/3)
wlan0: authenticated
wlan0: associate with d4:68:ba:19:d8:e0 (try 1/3)
wlan0: RX AssocResp from d4:68:ba:19:d8:e0 (capab=0x1421 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by d4:68:ba:19:d8:e0
FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[drm:hdmi_audio_set_caps] *ERROR* LINE: 276 set_element=9
[drm:hdmi_audio_set_caps] *ERROR* LINE: 276 set_element=7
[drm:hdmi_audio_get_caps] *ERROR* 
[drm:hdmi_audio_get_caps] *ERROR* 
[drm:hdmi_audio_get_caps] *ERROR* 
[drm:hdmi_audio_get_caps] *ERROR* 
[drm:hdmi_audio_get_caps] *ERROR* 
[drm:hdmi_audio_get_caps] *ERROR* 
[drm:hdmi_audio_get_caps] *ERROR* 
[drm:hdmi_audio_get_caps] *ERROR* 
[drm:hdmi_audio_set_caps] *ERROR* LINE: 276 set_element=8
[drm:hdmi_audio_set_caps] *ERROR* LINE: 276 set_element=6
[drm:hdmi_audio_set_caps] *ERROR* LINE: 276 set_element=9
[drm:hdmi_audio_set_caps] *ERROR* LINE: 276 set_element=7
init: alsa-restore main process (2669) terminated with status 99
init: plymouth-stop pre-start process (2748) terminated with status 1
usb 1-1.1: USB disconnect, device number 4
iwlwifi 0000:01:00.0: Queue 2 stuck for 10000 ms.
iwlwifi 0000:01:00.0: Current SW read_ptr 14 write_ptr 16
iwl data: 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
iwlwifi 0000:01:00.0: FH TRBs(0) = 0x80003000
iwlwifi 0000:01:00.0: FH TRBs(1) = 0x8010200f
iwlwifi 0000:01:00.0: FH TRBs(2) = 0x00000000
iwlwifi 0000:01:00.0: FH TRBs(3) = 0x80300011
iwlwifi 0000:01:00.0: FH TRBs(4) = 0x00000000
iwlwifi 0000:01:00.0: FH TRBs(5) = 0x00000000
iwlwifi 0000:01:00.0: FH TRBs(6) = 0x00000000
iwlwifi 0000:01:00.0: FH TRBs(7) = 0x00709063
iwlwifi 0000:01:00.0: Q 0 is active and mapped to fifo 3 ra_tid 0x0000 [18,18]
iwlwifi 0000:01:00.0: Q 1 is active and mapped to fifo 2 ra_tid 0x0000 [0,0]
iwlwifi 0000:01:00.0: Q 2 is active and mapped to fifo 1 ra_tid 0x0000 [14,16]
iwlwifi 0000:01:00.0: Q 3 is active and mapped to fifo 0 ra_tid 0x0000 [1,1]
iwlwifi 0000:01:00.0: Q 4 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
iwlwifi 0000:01:00.0: Q 5 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
iwlwifi 0000:01:00.0: Q 6 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
iwlwifi 0000:01:00.0: Q 7 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
iwlwifi 0000:01:00.0: Q 8 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
iwlwifi 0000:01:00.0: Q 9 is active and mapped to fifo 7 ra_tid 0x0000 [100,100]
iwlwifi 0000:01:00.0: Q 10 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
iwlwifi 0000:01:00.0: Q 11 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
iwlwifi 0000:01:00.0: Q 12 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
iwlwifi 0000:01:00.0: Q 13 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
iwlwifi 0000:01:00.0: Q 14 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
iwlwifi 0000:01:00.0: Q 15 is active and mapped to fifo 5 ra_tid 0x0000 [0,0]
iwlwifi 0000:01:00.0: Q 16 is inactive and mapped to fifo 1 ra_tid 0x0000 [228,228]
iwlwifi 0000:01:00.0: Q 17 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
iwlwifi 0000:01:00.0: Q 18 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
iwlwifi 0000:01:00.0: Q 19 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
iwlwifi 0000:01:00.0: Q 20 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
iwlwifi 0000:01:00.0: Q 21 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
iwlwifi 0000:01:00.0: Q 22 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
iwlwifi 0000:01:00.0: Q 23 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
iwlwifi 0000:01:00.0: Q 24 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
iwlwifi 0000:01:00.0: Q 25 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
iwlwifi 0000:01:00.0: Q 26 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
iwlwifi 0000:01:00.0: Q 27 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
iwlwifi 0000:01:00.0: Q 28 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
iwlwifi 0000:01:00.0: Q 29 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
iwlwifi 0000:01:00.0: Q 30 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0]
iwlwifi 0000:01:00.0: Microcode SW error detected.  Restarting 0x2000000.
iwlwifi 0000:01:00.0: CSR values:
iwlwifi 0000:01:00.0: (2nd byte of CSR_INT_COALESCING is CSR_INT_PERIODIC_REG)
iwlwifi 0000:01:00.0:        CSR_HW_IF_CONFIG_REG: 0X00c89200
iwlwifi 0000:01:00.0:          CSR_INT_COALESCING: 0X00000040
iwlwifi 0000:01:00.0:                     CSR_INT: 0X00000000
iwlwifi 0000:01:00.0:                CSR_INT_MASK: 0X00000000
iwlwifi 0000:01:00.0:           CSR_FH_INT_STATUS: 0X00000000
iwlwifi 0000:01:00.0:                 CSR_GPIO_IN: 0X00000000
iwlwifi 0000:01:00.0:                   CSR_RESET: 0X00000000
iwlwifi 0000:01:00.0:                CSR_GP_CNTRL: 0X080403c5
iwlwifi 0000:01:00.0:                  CSR_HW_REV: 0X00000210
iwlwifi 0000:01:00.0:              CSR_EEPROM_REG: 0Xd55555d5
iwlwifi 0000:01:00.0:               CSR_EEPROM_GP: 0X00000000
iwlwifi 0000:01:00.0:              CSR_OTP_GP_REG: 0Xd55555d5
iwlwifi 0000:01:00.0:                 CSR_GIO_REG: 0X001f0042
iwlwifi 0000:01:00.0:            CSR_GP_UCODE_REG: 0X00000000
iwlwifi 0000:01:00.0:           CSR_GP_DRIVER_REG: 0X00000000
iwlwifi 0000:01:00.0:           CSR_UCODE_DRV_GP1: 0X00000000
iwlwifi 0000:01:00.0:           CSR_UCODE_DRV_GP2: 0X00000000
iwlwifi 0000:01:00.0:                 CSR_LED_REG: 0X00000060
iwlwifi 0000:01:00.0:        CSR_DRAM_INT_TBL_REG: 0X880794fb
iwlwifi 0000:01:00.0:        CSR_GIO_CHICKEN_BITS: 0X27800200
iwlwifi 0000:01:00.0:             CSR_ANA_PLL_CFG: 0Xd55555d5
iwlwifi 0000:01:00.0:      CSR_MONITOR_STATUS_REG: 0Xd3b7f7f7
iwlwifi 0000:01:00.0:           CSR_HW_REV_WA_REG: 0X0001001a
iwlwifi 0000:01:00.0:        CSR_DBG_HPET_MEM_REG: 0Xffff0000
iwlwifi 0000:01:00.0: FH register values:
iwlwifi 0000:01:00.0:         FH_RSCSR_CHNL0_STTS_WPTR_REG: 0X078a1100
iwlwifi 0000:01:00.0:        FH_RSCSR_CHNL0_RBDCB_BASE_REG: 0X0078a100
iwlwifi 0000:01:00.0:                  FH_RSCSR_CHNL0_WPTR: 0X000000b8
iwlwifi 0000:01:00.0:         FH_MEM_RCSR_CHNL0_CONFIG_REG: 0X00801114
iwlwifi 0000:01:00.0:          FH_MEM_RSSR_SHARED_CTRL_REG: 0X000000fc
iwlwifi 0000:01:00.0:            FH_MEM_RSSR_RX_STATUS_REG: 0X03030000
iwlwifi 0000:01:00.0:    FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV: 0X00000000
iwlwifi 0000:01:00.0:                FH_TSSR_TX_STATUS_REG: 0X07ff0001
iwlwifi 0000:01:00.0:                 FH_TSSR_TX_ERROR_REG: 0X00000000
iwlwifi 0000:01:00.0: Start IWL Error Log Dump:
iwlwifi 0000:01:00.0: Status: 0x00000000, count: 6
iwlwifi 0000:01:00.0: Loaded firmware version: 16.242414.0
iwlwifi 0000:01:00.0: 0x00000084 | NMI_INTERRUPT_UNKNOWN       
iwlwifi 0000:01:00.0: 0x000002F0 | uPc
iwlwifi 0000:01:00.0: 0x00000000 | branchlink1
iwlwifi 0000:01:00.0: 0x00042524 | branchlink2
iwlwifi 0000:01:00.0: 0x00042E68 | interruptlink1
iwlwifi 0000:01:00.0: 0x00042E68 | interruptlink2
iwlwifi 0000:01:00.0: 0x00000000 | data1
iwlwifi 0000:01:00.0: 0x00000080 | data2
iwlwifi 0000:01:00.0: 0x07030000 | data3
iwlwifi 0000:01:00.0: 0xC3812D09 | beacon time
iwlwifi 0000:01:00.0: 0xE0961880 | tsf low
iwlwifi 0000:01:00.0: 0x00000097 | tsf hi
iwlwifi 0000:01:00.0: 0x00000000 | time gp1
iwlwifi 0000:01:00.0: 0x78A5A72B | time gp2
iwlwifi 0000:01:00.0: 0x00000000 | time gp3
iwlwifi 0000:01:00.0: 0x00000010 | uCode version major
iwlwifi 0000:01:00.0: 0x0003B2EE | uCode version minor
iwlwifi 0000:01:00.0: 0x00000210 | hw version
iwlwifi 0000:01:00.0: 0x00C89200 | board version
iwlwifi 0000:01:00.0: 0x0963009C | hcmd
iwlwifi 0000:01:00.0: 0x00022002 | isr0
iwlwifi 0000:01:00.0: 0x00800000 | isr1
iwlwifi 0000:01:00.0: 0x00000002 | isr2
iwlwifi 0000:01:00.0: 0x004140C0 | isr3
iwlwifi 0000:01:00.0: 0x00000000 | isr4
iwlwifi 0000:01:00.0: 0x00000110 | isr_pref
iwlwifi 0000:01:00.0: 0x00000000 | wait_event
iwlwifi 0000:01:00.0: 0x00002208 | l2p_control
iwlwifi 0000:01:00.0: 0x00000020 | l2p_duration
iwlwifi 0000:01:00.0: 0x0000003F | l2p_mhvalid
iwlwifi 0000:01:00.0: 0x000000A0 | l2p_addr_match
iwlwifi 0000:01:00.0: 0x00000005 | lmpm_pmg_sel
iwlwifi 0000:01:00.0: 0x17111915 | timestamp
iwlwifi 0000:01:00.0: 0x0034B8C8 | flow_handler
ieee80211 phy0: Hardware restart was requested
iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
wlan0: deauthenticated from d4:68:ba:19:d8:e0 (Reason: 101=)
wlan0: authenticate with d4:68:ba:19:d7:f9
wlan0: send auth to d4:68:ba:19:d7:f9 (try 1/3)
wlan0: authenticated
wlan0: associate with d4:68:ba:19:d7:f9 (try 1/3)
wlan0: RX AssocResp from d4:68:ba:19:d7:f9 (capab=0x1421 status=0 aid=3)
wlan0: associated
wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by d4:68:ba:19:d7:f9
wlan0: authenticate with 10:0e:0e:83:07:d1
wlan0: send auth to 10:0e:0e:83:07:d1 (try 1/3)
wlan0: authenticated
wlan0: associate with 10:0e:0e:83:07:d1 (try 1/3)
wlan0: RX AssocResp from 10:0e:0e:83:07:d1 (capab=0x1421 status=0 aid=1)
wlan0: associated
wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by 10:0e:0e:83:07:d1
wlan0: authenticate with d4:68:ba:19:d7:f9
wlan0: send auth to d4:68:ba:19:d7:f9 (try 1/3)
wlan0: authenticated
wlan0: associate with d4:68:ba:19:d7:f9 (try 1/3)
wlan0: RX AssocResp from d4:68:ba:19:d7:f9 (capab=0x1421 status=0 aid=3)
wlan0: associated
wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by d4:68:ba:19:d7:f9
wlan0: authenticate with d4:68:ba:99:d8:e0
wlan0: send auth to d4:68:ba:99:d8:e0 (try 1/3)
wlan0: authenticated
wlan0: associate with d4:68:ba:99:d8:e0 (try 1/3)
wlan0: RX AssocResp from d4:68:ba:99:d8:e0 (capab=0x1401 status=0 aid=2)
wlan0: associated
wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by d4:68:ba:99:d8:e0

Return To 1 System Information