Xorg.0.log - comparisonJRH
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: hs20-bc2-4 2.6.18-274.3.1.el5
Current Operating System: Linux rogue.ne.oregonstate.edu 2.6.32-131.17.1.el6.x86_64 #1 SMP Thu Sep 29 10:24:25 EDT 2011 x86_64
Kernel command line: ro root=/dev/mapper/vg_rhel6-lv_root rd_LVM_LV=vg_rhel6/lv_root rd_LVM_LV=vg_rhel6/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us crashkernel=129M@0M rhgb quiet
Build Date: 27 September 2011 03:13:53PM
Build ID: xorg-x11-server 1.7.7-29.el6_1.2
Current version of pixman: 0.18.4
Before reporting problems, check
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 27 09:05:45 2011
(II) Loader magic: 0x7c7600
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 1
(--) PCI:*(0:6:3:0) 102b:0532:1028:0236 Matrox Graphics, Inc. MGA G200eW WPCM450 rev 10, Mem @ 0xd5800000/8388608, 0xde7fc000/16384, 0xde800000/8388608, BIOS @ 0x????????/65536
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default mga Device 0"
Driver "mga"
EndSection
Section "Screen"
Identifier "Builtin Default mga Screen 0"
Device "Builtin Default mga Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default mga Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default mga Screen 0" (0)
(**) | |-->Monitor ""
(**) | |-->Device "Builtin Default mga Device 0"
(==) No monitor specified for screen "Builtin Default mga Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor ""
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor ""
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
(==) ModulePath set to "/usr/lib64/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AutoAddDevices.
(II) LoadModule: "extmod"
(II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "mga"
(II) Loading /usr/lib64/xorg/modules/drivers/mga_drv.so
(II) Module mga: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.4.12
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.4.2
ABI class: X.Org Video Driver, version 6.0
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI,
mgag200 SE A PCI, mgag200 SE B PCI, mgag200 EV Maxim,
mgag200 ER SH7757, mgag200 eW Nuvoton, mgag200eH, mgag400, mgag550
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 06@00:03:0
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib64/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.0.2
ABI class: X.Org Video Driver, version 6.0
(EE) open /dev/fb0: No such device
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib64/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(--) MGA(0): Chipset: "mgag200 eW Nuvoton"
(--) MGA(0): Linear framebuffer at 0xD5800000
(--) MGA(0): MMIO registers at 0xDE7FC000
(--) MGA(0): Pseudo-DMA transfer window at 0xDE800000
(II) MGA(0): Creating default Display subsection in Screen section
"Builtin Default mga Screen 0" for depth/fbbpp 24/32
(==) MGA(0): Depth 24, (--) framebuffer bpp 32
(==) MGA(0): RGB weight 888
(**) MGA(0): Enabling KVM
(==) MGA(0): Using AGP 1x mode
(==) MGA(0): Using HW cursor
(==) MGA(0): Using XAA acceleration
(--) MGA(0): Video BIOS info block at offset 0x07D40
(==) MGA(0): VideoRAM: 8128 kByte
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) MGA(0): I2C bus "DDC P1" initialized.
(II) MGA(0): I2C device "DDC P1:ddc2" registered at address 0xA0.
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib64/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib64/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) MGA(0): initializing int10
(II) MGA(0): Primary V_BIOS segment is: 0xc000
(II) MGA(0): VESA BIOS detected
(II) MGA(0): VESA VBE Version 3.0
(II) MGA(0): VESA VBE Total Mem: 8192 kB
(II) MGA(0): VESA VBE OEM: Matrox Graphics Inc.
(II) MGA(0): VESA VBE OEM Software Rev: 3.8
(II) MGA(0): VESA VBE OEM Vendor: Matrox
(II) MGA(0): VESA VBE OEM Product: MGA-G200
(II) MGA(0): VESA VBE OEM Product Rev: 00
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) MGA(0): VESA VBE DDC supported
(II) MGA(0): VESA VBE DDC Level none
(II) MGA(0): VESA VBE DDC transfer in appr. 0 sec.
(II) MGA(0): VESA VBE DDC read failed
(==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
(==) MGA(0): Min pixel clock is 18 MHz
(--) MGA(0): Max pixel clock is 203 MHz
(II) MGA(0): : Using default hsync range of 31.50-48.00 kHz
(II) MGA(0): : Using default vrefresh range of 50.00-70.00 Hz
(II) MGA(0): : Using default maximum pixel clock of 65.00 MHz
(WW) MGA(0): Unable to estimate virtual size
(II) MGA(0): Clock range: 18.75 to 203.40 MHz
(II) MGA(0): Not using default mode "640x350" (vrefresh out of range)
(II) MGA(0): Not using default mode "640x400" (vrefresh out of range)
(II) MGA(0): Not using default mode "720x400" (vrefresh out of range)
(II) MGA(0): Not using default mode "640x480" (vrefresh out of range)
(II) MGA(0): Not using default mode "640x480" (vrefresh out of range)
(II) MGA(0): Not using default mode "640x480" (vrefresh out of range)
(II) MGA(0): Not using default mode "800x600" (vrefresh out of range)
(II) MGA(0): Not using default mode "800x600" (vrefresh out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "848x480" (hsync out of range)
(II) MGA(0): Not using default mode "1024x768" (vrefresh out of range)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "1024x768" (mode requires too much memory bandwidth)
(II) MGA(0): Not using default mode "1152x864" (hsync out of range)
(II) MGA(0): Not using default mode "1280x768" (monitor doesn't support reduced blanking)
(II) MGA(0): Not using default mode "1280x768" (mode clock too high)
(II) MGA(0): Not using default mode "1280x768" (hsync out of range)
(II) MGA(0): Not using default mode "1280x768" (hsync out of range)
(II) MGA(0): Not using default mode "1280x768" (mode requires too much memory bandwidth)
(II) MGA(0): Not using default mode "1280x800" (hsync out of range)
(II) MGA(0): Not using default mode "1280x800" (hsync out of range)
(II) MGA(0): Not using default mode "1280x800" (hsync out of range)
(II) MGA(0): Not using default mode "1280x800" (mode requires too much memory bandwidth)
(II) MGA(0): Not using default mode "1280x800" (mode requires too much memory bandwidth)
(II) MGA(0): Not using default mode "1280x960" (hsync out of range)
(II) MGA(0): Not using default mode "1280x960" (mode requires too much memory bandwidth)
(II) MGA(0): Not using default mode "1280x960" (mode requires too much memory bandwidth)
(II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
(II) MGA(0): Not using default mode "1280x1024" (mode requires too much memory bandwidth)
(II) MGA(0): Not using default mode "1280x1024" (mode requires too much memory bandwidth)
(II) MGA(0): Not using default mode "1280x1024" (mode requires too much memory bandwidth)
(II) MGA(0): Not using default mode "1360x768" (width too large for virtual size)
(II) MGA(0): Not using default mode "1360x768" (width too large for virtual size)
(II) MGA(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) MGA(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) MGA(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) MGA(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) MGA(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1440x900" (width too large for virtual size)
(II) MGA(0): Not using default mode "1440x900" (width too large for virtual size)
(II) MGA(0): Not using default mode "1440x900" (width too large for virtual size)
(II) MGA(0): Not using default mode "1440x900" (width too large for virtual size)
(II) MGA(0): Not using default mode "1440x900" (width too large for virtual size)
(II) MGA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) MGA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) MGA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) MGA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) MGA(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1680x1050" (width too large for virtual size)
(II) MGA(0): Not using default mode "1680x1050" (width too large for virtual size)
(II) MGA(0): Not using default mode "1680x1050" (width too large for virtual size)
(II) MGA(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1920x1200" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1920x1200" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1920x1200" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1920x1200" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1920x1200" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) MGA(0): Not using default mode "2560x1600" (insufficient memory for mode)
(II) MGA(0): Not using default mode "2560x1600" (insufficient memory for mode)
(II) MGA(0): Not using default mode "2560x1600" (insufficient memory for mode)
(II) MGA(0): Not using default mode "2560x1600" (insufficient memory for mode)
(II) MGA(0): Not using default mode "2560x1600" (insufficient memory for mode)
(--) MGA(0): Has SDRAM
(--) MGA(0): Virtual size is 1024x768 (pitch 1024)
(**) MGA(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) MGA(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(**) MGA(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) MGA(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(**) MGA(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) MGA(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(**) MGA(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) MGA(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(==) MGA(0): DPI set to (96, 96)
(II) MGA(0): YDstOrg is set to 0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib64/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib64/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.2.1
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib64/xorg/modules/drivers/vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib64/xorg/modules/linux/libfbdevhw.so
(--) Depth 24 pixmap format is 32 bpp
(II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(--) MGA(0): 64 DWORD fifo
(==) MGA(0): Default visual is TrueColor
(EE) MGA(0): Static buffer allocation failed, not initializing the DRI
(EE) MGA(0): Need at least 9216 kB video memory at this resolution, bit depth
(II) MGA(0): Using 1263 lines for offscreen memory.
(II) MGA(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid filled trapezoids
8x8 mono pattern filled rectangles
8x8 mono pattern filled trapezoids
Indirect CPU to Screen color expansion
Screen to Screen color expansion
Solid Lines
Dashed Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
10 256x256 slots
(==) MGA(0): Backing store disabled
(==) MGA(0): Silken mouse enabled
(==) MGA(0): DPMS enabled
(WW) MGA(0): Direct rendering disabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) SELinux: Disabled by boolean
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib64/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/hal: Adding input device Avocent USB Composite Device-0
(II) LoadModule: "evdev"
(II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Avocent USB Composite Device-0: always reports core events
(**) Avocent USB Composite Device-0: Device: "/dev/input/event2"
(II) Avocent USB Composite Device-0: Found keys
(II) Avocent USB Composite Device-0: Configuring as keyboard
(II) XINPUT: Adding extended input device "Avocent USB Composite Device-0" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105+inet"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105+inet"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event1"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device Avocent USB Composite Device-0
(**) Avocent USB Composite Device-0: always reports core events
(**) Avocent USB Composite Device-0: Device: "/dev/input/event3"
(II) Avocent USB Composite Device-0: Found 3 mouse buttons
(II) Avocent USB Composite Device-0: Found scroll wheel(s)
(II) Avocent USB Composite Device-0: Found relative axes
(II) Avocent USB Composite Device-0: Found absolute axes
(II) Avocent USB Composite Device-0: Found x and y absolute axes
(II) Avocent USB Composite Device-0: Configuring as mouse
(**) Avocent USB Composite Device-0: YAxisMapping: buttons 4 and 5
(**) Avocent USB Composite Device-0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Avocent USB Composite Device-0" (type: MOUSE)
(EE) Avocent USB Composite Device-0: failed to initialize for relative axes.
(**) Avocent USB Composite Device-0: (accel) keeping acceleration scheme 1
(**) Avocent USB Composite Device-0: (accel) acceleration profile 0
(II) Avocent USB Composite Device-0: initialized for absolute axes.
(II) Avocent USB Composite Device-0: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) Avocent USB Composite Device-0: Close
(II) UnloadModule: "evdev"