dmesg - 3
microcode: CPU0 microcode updated early to revision 0x60f, date = 2010-09-29
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-21-generic (buildd@lgw01-16) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #37~14.04.1-Ubuntu SMP Wed Apr 20 16:33:38 UTC 2016 (Ubuntu 4.4.0-21.37~14.04.1-generic 4.4.6)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e3ff] usable
BIOS-e820: [mem 0x000000000009e400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bf8a0fff] usable
BIOS-e820: [mem 0x00000000bf8a1000-0x00000000bf8a6fff] reserved
BIOS-e820: [mem 0x00000000bf8a7000-0x00000000bf9bcfff] usable
BIOS-e820: [mem 0x00000000bf9bd000-0x00000000bfa0efff] reserved
BIOS-e820: [mem 0x00000000bfa0f000-0x00000000bfb07fff] usable
BIOS-e820: [mem 0x00000000bfb08000-0x00000000bfd0efff] reserved
BIOS-e820: [mem 0x00000000bfd0f000-0x00000000bfd17fff] usable
BIOS-e820: [mem 0x00000000bfd18000-0x00000000bfd1efff] reserved
BIOS-e820: [mem 0x00000000bfd1f000-0x00000000bfd64fff] usable
BIOS-e820: [mem 0x00000000bfd65000-0x00000000bfd9efff] ACPI NVS
BIOS-e820: [mem 0x00000000bfd9f000-0x00000000bfdfffff] ACPI data
BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: SAMSUNG ELECTRONICS CO., LTD. R710 /R710 , BIOS 11SV.MP00.20091217.WZW 12/17/2009
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0C0000000 mask FC0000000 uncachable
1 base 000000000 mask F00000000 write-back
2 base 100000000 mask FC0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
original variable MTRRs
reg 0, base: 3GB, range: 1GB, type UC
reg 1, base: 0GB, range: 4GB, type WB
reg 2, base: 4GB, range: 1GB, type WB
total RAM covered: 4096M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64K num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 4GB, range: 1GB, type WB
e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbfd65 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f7300-0x000f730f] mapped at [ffff8800000f7300]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
BRK [0x02002000, 0x02002fff] PGTABLE
BRK [0x02003000, 0x02003fff] PGTABLE
BRK [0x02004000, 0x02004fff] PGTABLE
BRK [0x02005000, 0x02005fff] PGTABLE
BRK [0x02006000, 0x02006fff] PGTABLE
BRK [0x02007000, 0x02007fff] PGTABLE
RAMDISK: [mem 0x34408000-0x361fbfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F7260 000024 (v02 PTLTD )
ACPI: XSDT 0x00000000BFDF7050 000064 (v01 SECCSD LH43STAR 06040000 LTP 00000000)
ACPI: FACP 0x00000000BFDE7000 0000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
ACPI: DSDT 0x00000000BFDE8000 007CB8 (v02 Intel CANTIGA 06040000 INTL 20050624)
ACPI: FACS 0x00000000BFD9EFC0 000040
ACPI: FACS 0x00000000BFD9EFC0 000040
ACPI: HPET 0x00000000BFDFEEFC 000038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
ACPI: MCFG 0x00000000BFDFEF34 00003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
ACPI: APIC 0x00000000BFDFEF70 000068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: BOOT 0x00000000BFDFEFD8 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SSDT 0x00000000BFDE6000 0005F9 (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: SSDT 0x00000000BFDE5000 000259 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
ACPI: SSDT 0x00000000BFDE4000 00020F (v01 PmRef ApTst 00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
NODE_DATA(0) allocated [mem 0x13fff8000-0x13fffcfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000013fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x00000000bf8a0fff]
node 0: [mem 0x00000000bf8a7000-0x00000000bf9bcfff]
node 0: [mem 0x00000000bfa0f000-0x00000000bfb07fff]
node 0: [mem 0x00000000bfd0f000-0x00000000bfd17fff]
node 0: [mem 0x00000000bfd1f000-0x00000000bfd64fff]
node 0: [mem 0x0000000100000000-0x000000013fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
On node 0 totalpages: 1047196
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 12204 pages used for memmap
DMA32 zone: 781055 pages, LIFO batch:31
Normal zone: 4096 pages used for memmap
Normal zone: 262144 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
PM: Registered nosave memory: [mem 0x000d4000-0x000dbfff]
PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
PM: Registered nosave memory: [mem 0xbf8a1000-0xbf8a6fff]
PM: Registered nosave memory: [mem 0xbf9bd000-0xbfa0efff]
PM: Registered nosave memory: [mem 0xbfb08000-0xbfd0efff]
PM: Registered nosave memory: [mem 0xbfd18000-0xbfd1efff]
PM: Registered nosave memory: [mem 0xbfd65000-0xbfd9efff]
PM: Registered nosave memory: [mem 0xbfd9f000-0xbfdfffff]
PM: Registered nosave memory: [mem 0xbfe00000-0xffffffff]
e820: [mem 0xbfe00000-0xffffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88013fc00000 s98008 r8192 d28968 u1048576
pcpu-alloc: s98008 r8192 d28968 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030811
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 4009480K/4188784K available (8141K kernel code, 1287K rwdata, 3936K rodata, 1484K init, 1292K bss, 179304K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
NR_IRQS:16640 nr_irqs:440 16
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2260.926 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.85 BogoMIPS (lpj=9043704)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 4 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff81eb6000 - ffffffff81ebd000)
ftrace: allocating 31914 entries in 125 pages
smpboot: Max logical packages: 1
smpboot: APIC(0) Converting physical 0 to logical package 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz (family: 0x6, model: 0x17, stepping: 0x6)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1
microcode: CPU1 microcode updated early to revision 0x60f, date = 2010-09-29
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (9043.70 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xbfd65000-0xbfd9efff] (237568 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 5:00:39, date: 05/02/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
Simple Boot Flag at 0x37 set to 0x1
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88013B08FC00 000265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88013A40E000 000C78 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88013A574600 0001CF (v01 PmRef ApIst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88013A46B480 00008D (v01 PmRef ApCst 00003000 INTL 20050624)
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
acpi SEC0003:00: ACPI dock station (docks/bays count: 1)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0x1800-0x181f]
pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0x1820-0x183f]
pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0x1840-0x185f]
pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xf6204800-0xf6204bff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf6200000-0xf6203fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x1860-0x187f]
pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x1880-0x189f]
pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x18a0-0x18bf]
pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xf6204c00-0xf6204fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x18f0-0x18f7]
pci 0000:00:1f.2: reg 0x14: [io 0x18e4-0x18e7]
pci 0000:00:1f.2: reg 0x18: [io 0x18e8-0x18ef]
pci 0000:00:1f.2: reg 0x1c: [io 0x18e0-0x18e3]
pci 0000:00:1f.2: reg 0x20: [io 0x18c0-0x18df]
pci 0000:00:1f.2: reg 0x24: [mem 0xf6204000-0xf62047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x1c00-0x1c1f]
pci 0000:01:00.0: [10de:0649] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xce000000-0xceffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xcc000000-0xcdffffff 64bit]
pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [168c:001c] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xf3000000-0xf300ffff 64bit]
pci 0000:02:00.0: PME# supported from D3hot
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.0: PCI bridge to [bus 02-03]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xf3000000-0xf3ffffff]
pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf0ffffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1c.2: PCI bridge to [bus 04-05]
pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf4ffffff]
pci 0000:00:1c.2: bridge window [mem 0xf1000000-0xf1ffffff 64bit pref]
pci 0000:06:00.0: [11ab:4363] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [mem 0xf5000000-0xf5003fff 64bit]
pci 0000:06:00.0: reg 0x18: [io 0x5000-0x50ff]
pci 0000:06:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 06-07]
pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.3: bridge window [mem 0xf5000000-0xf5ffffff]
pci 0000:00:1c.3: bridge window [mem 0xf2000000-0xf2ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
ACPI: PCI Interrupt Link [LNKC] (IRQs *5)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *10)
ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
ACPI: PCI Interrupt Link [LNKH] (IRQs *5)
ACPI: Enabled 9 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI : EC: 0 stale EC events cleared
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e400-0x0009ffff]
e820: reserve RAM buffer [mem 0xbf8a1000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf9bd000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbfb08000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbfd18000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbfd65000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
pnp 00:01: disabling [io 0x5000-0x500f] because it overlaps 0000:00:1c.3 BAR 13 [io 0x5000-0x5fff]
pnp 00:01: disabling [io 0x5000-0x500f disabled] because it overlaps 0000:06:00.0 BAR 2 [io 0x5000-0x50ff]
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0x0480-0x048f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x0400-0x047f] could not be reserved
system 00:01: [io 0x0480-0x048f] has been reserved
system 00:01: [io 0x1180-0x11ff] has been reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: [io 0xfe00] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x06a0-0x06af] has been reserved
system 00:02: [io 0x06b0-0x06ff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0000000-0xc00000ff 64bit]
pci 0000:01:00.0: BAR 6: no space for [mem size 0x00080000 pref]
pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-03]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xf3000000-0xf3ffffff]
pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf0ffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04-05]
pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf4ffffff]
pci 0000:00:1c.2: bridge window [mem 0xf1000000-0xf1ffffff 64bit pref]
pci 0000:06:00.0: BAR 6: assigned [mem 0xf5020000-0xf503ffff pref]
pci 0000:00:1c.3: PCI bridge to [bus 06-07]
pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.3: bridge window [mem 0xf5000000-0xf5ffffff]
pci 0000:00:1c.3: bridge window [mem 0xf2000000-0xf2ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 08]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff window]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xcc000000-0xceffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xf3000000-0xf3ffffff]
pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf0ffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:04: resource 1 [mem 0xf4000000-0xf4ffffff]
pci_bus 0000:04: resource 2 [mem 0xf1000000-0xf1ffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:06: resource 1 [mem 0xf5000000-0xf5ffffff]
pci_bus 0000:06: resource 2 [mem 0xf2000000-0xf2ffffff 64bit pref]
pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:08: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:08: resource 7 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:08: resource 8 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:08: resource 9 [mem 0xc0000000-0xfebfffff window]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 30672K (ffff880034408000 - ffff8800361fc000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbb8a1000-0xbf8a1000] (64MB) mapped at [ffff8800bb8a1000-ffff8800bf8a0fff]
Scanning for low memory corruption every 60 seconds
futex hash table entries: 512 (order: 3, 32768 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1462165239.768:1): initialized
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 23
ACPI: AC Adapter [ADP1] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (52 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (52 C)
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT1] (battery absent)
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 19, io mem 0xf6204800
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-21-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xf6204c00
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-21-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 4.4.0-21-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 4.4.0-21-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: detected 2 ports
uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 4.4.0-21-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 4.4.0-21-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 4.4.0-21-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 4.4.0-21-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60f
microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60f
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 0002e23df312c3a3744fe28cbc8c10144435c9e3'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 0:631:10
hub 5-0:1.0: hash matches
rtc_cmos 00:03: setting system clock to 2016-05-02 05:00:40 UTC (1462165240)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1484K (ffffffff81d43000 - ffffffff81eb6000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 40K (ffff8800017f6000 - ffff880001800000)
Freeing unused kernel memory: 160K (ffff880001bd8000 - ffff880001c00000)
systemd-udevd[121]: starting version 204
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
ACPI: Video Device [NVID] (multi-head: yes rom: no post: no)
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
sky2: driver version 1.30
sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3
sky2 0000:06:00.0 eth0: addr 00:13:77:b0:18:cc
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
acpi device:02: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input9
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf6204000 port 0xf6204100 irq 29
ata2: SATA max UDMA/133 abar m2048@0xf6204000 port 0xf6204180 irq 29
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf6204000 port 0xf6204300 irq 29
ata6: SATA max UDMA/133 abar m2048@0xf6204000 port 0xf6204380 irq 29
usb 3-1: new full-speed USB device number 2 using uhci_hcd
usb 6-1: new full-speed USB device number 2 using uhci_hcd
usb 1-2: new high-speed USB device number 3 using ehci-pci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: FUJITSU MHZ2250BH G2, 00000009, max UDMA/100
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA FUJITSU MHZ2250B 0009 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 < sda5 > sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
usb 3-1: New USB device found, idVendor=09da, idProduct=9090
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB Device
usb 3-1: Manufacturer: A4TECH
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: A4TECH USB Device as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/0003:09DA:9090.0001/input/input14
usb 7-1: new low-speed USB device number 2 using uhci_hcd
usb 1-2: New USB device found, idVendor=17ef, idProduct=7920
usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-2: Product: Lenovo
usb 1-2: Manufacturer: MediaTek
usb 1-2: SerialNumber: VW75PVVW99LNU8SG
hid-generic 0003:09DA:9090.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:1a.0-1/input0
input: A4TECH USB Device as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/0003:09DA:9090.0002/input/input15
hid-generic 0003:09DA:9090.0002: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:1a.0-1/input1
usb 8-2: new full-speed USB device number 2 using uhci_hcd
usb 1-3: new high-speed USB device number 4 using ehci-pci
usb 6-1: New USB device found, idVendor=1852, idProduct=7921
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: Audiotrak ProDigy CUBE
usb 6-1: Manufacturer: GYROCOM C&C Co., LTD
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x20970595e41, max_idle_ns: 440795281497 ns
input: GYROCOM C&C Co., LTD Audiotrak ProDigy CUBE as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/0003:1852:7921.0003/input/input16
usb 7-1: New USB device found, idVendor=0603, idProduct=00f2
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-1: Product: USB Keyboard
usb 7-1: Manufacturer: NOVATEK
hid-generic 0003:1852:7921.0003: input,hidraw2: USB HID v1.00 Device [GYROCOM C&C Co., LTD Audiotrak ProDigy CUBE] on usb-0000:00:1d.0-1/input0
input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/0003:0603:00F2.0004/input/input17
psmouse serio4: synaptics: Touchpad model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04711/0xa00000/0x0/0x0, board id: 0, fw id: 437321
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633A, SC03, max UDMA/100
ata2.00: applying bridge limits
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633A SC03 PQ: 0 ANSI: 5
hid-generic 0003:0603:00F2.0004: input,hidraw3: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:1d.1-1/input0
sr 1:0:0:0: [sr0] scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input13
input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/0003:0603:00F2.0005/input/input18
usb 1-3: New USB device found, idVendor=0ac8, idProduct=c302
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3: Product: Vega USB 2.0 Camera.
usb 1-3: Manufacturer: Vimicro Corp.
hid-generic 0003:0603:00F2.0005: input,hiddev0,hidraw4: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1d.1-1/input1
usb-storage 1-2:1.1: USB Mass Storage device detected
scsi host6: usb-storage 1-2:1.1
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
usb 8-2: New USB device found, idVendor=0a5c, idProduct=2101
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-2: Product: BCM92045NMD
usb 8-2: Manufacturer: Broadcom Corp
usb 8-2: SerialNumber: 002269C987FD
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
scsi 6:0:0:0: CD-ROM Linux File-CD Gadget 0310 PQ: 0 ANSI: 2
sr 6:0:0:0: [sr1] scsi-1 drive
sr 6:0:0:0: Attached scsi CD-ROM sr1
sr 6:0:0:0: Attached scsi generic sg2 type 5
random: nonblocking pool is initialized
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Adding 1464836k swap on /dev/sda5. Priority:-1 extents:1 across:1464836k FS
systemd-udevd[407]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011FF (\GPIO) (20150930/utaddress-254)
ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011CB (\DKGP) (20150930/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011FF (\GPIO) (20150930/utaddress-254)
ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011CB (\DKGP) (20150930/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC262: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
[drm] Initialized drm 1.1.0 20060810
usbcore: registered new interface driver btusb
ath5k 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
ath5k 0000:02:00.0: registered as 'phy0'
media: Linux media interface: v0.10
Linux video capture interface: v2.00
device-mapper: multipath: version 1.10.0 loaded
usbcore: registered new interface driver snd-usb-audio
uvcvideo: Found UVC 1.00 device Vega USB 2.0 Camera. (0ac8:c302)
input: Vega USB 2.0 Camera. as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input21
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
ath: EEPROM regdomain: 0x65
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x65
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
samsung_laptop: detected SABI interface: SwSmi@
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.96 Sun Nov 8 22:33:28 PST 2015
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
init: failsafe main process (735) killed by TERM signal
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: cups main process (803) killed by HUP signal
init: cups main process ended, respawning
zram: Added device: zram0
zram: Added device: zram1
zram0: detected capacity change from 0 to 1034719232
Adding 1010464k swap on /dev/zram0. Priority:5 extents:1 across:1010464k SSFS
zram1: detected capacity change from 0 to 1034719232
Adding 1010464k swap on /dev/zram1. Priority:5 extents:1 across:1010464k SSFS
init: samba-ad-dc main process (1184) terminated with status 1
sky2 0000:06:00.0 eth0: enabling interface
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (2201) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
CE: hpet increased min_delta_ns to 20115 nsec
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
usb 1-2: USB disconnect, device number 3
usb 1-2: new high-speed USB device number 5 using ehci-pci
usb 1-2: New USB device found, idVendor=17ef, idProduct=7924
usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-2: Product: Lenovo
usb 1-2: Manufacturer: MediaTek
usb 1-2: SerialNumber: VW75PVVW99LNU8SG
usbcore: registered new interface driver cdc_ether
rndis_host 1-2:1.0 usb0: register 'rndis_host' at usb-0000:00:1a.7-2, RNDIS device, 46:ae:d2:e9:d5:5b
usbcore: registered new interface driver rndis_host
systemd-hostnamed[7221]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
SGI XFS with ACLs, security attributes, realtime, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
ntfs: driver 2.1.32 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
raid6: sse2x1 gen() 2844 MB/s
raid6: sse2x1 xor() 2702 MB/s
raid6: sse2x2 gen() 3147 MB/s
raid6: sse2x2 xor() 3291 MB/s
raid6: sse2x4 gen() 4644 MB/s
raid6: sse2x4 xor() 3761 MB/s
raid6: using algorithm sse2x4 gen() 4644 MB/s
raid6: .... xor() 3761 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 9317.000 MB/sec
generic_sse: 8222.000 MB/sec
xor: using function: prefetch64-sse (9317.000 MB/sec)
Btrfs loaded
perf interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000