dmesg - 3
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.7-300.fc23.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 5.3.1 20151207 (Red Hat 5.3.1-2) (GCC) ) #1 SMP Wed Apr 13 02:52:52 UTC 2016
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007896afff] usable
BIOS-e820: [mem 0x000000007896b000-0x000000007aae1fff] reserved
BIOS-e820: [mem 0x000000007aae2000-0x000000007ab52fff] ACPI data
BIOS-e820: [mem 0x000000007ab53000-0x000000007b9d3fff] ACPI NVS
BIOS-e820: [mem 0x000000007b9d4000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000107fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: ASUSTeK COMPUTER INC. Z10PE-D16 WS/Z10PE-D16 WS, BIOS 3204 12/18/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x1080000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000080000000 mask 3FFF80000000 uncachable
1 base 038000000000 mask 3F8000000000 uncachable
2 base 0000C0000000 mask 3FFFE0000000 write-through
3 base 0000E0000000 mask 3FFFF0000000 write-through
4 base 0000F0000000 mask 3FFFFE000000 write-through
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x7896b max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fdc20-0x000fdc2f] mapped at [ffff8800000fdc20]
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0x02051000, 0x02051fff] PGTABLE
BRK [0x02052000, 0x02052fff] PGTABLE
BRK [0x02053000, 0x02053fff] PGTABLE
RAMDISK: [mem 0x35eb4000-0x36f51fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0580 000024 (v02 ALASKA)
ACPI: XSDT 0x000000007AAF80A8 0000CC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000007AB265E8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000007AAF8210 02E3D8 (v02 ALASKA A M I 01072009 INTL 20091013)
ACPI: FACS 0x000000007B9D2F80 000040
ACPI: APIC 0x000000007AB266F8 000304 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000007AB26A00 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000007AB26A48 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: TCPA 0x000000007AB26AE8 000032 (v02 ALASKA NAPAASF 00000001 MSFT 01000013)
ACPI: MCFG 0x000000007AB26B20 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: EINJ 0x000000007AB41B38 000130 (v01 ALASKA A M I 00000001 INTL 00000001)
ACPI: UEFI 0x000000007AB26BB8 000042 (v01 ALASKA A M I 01072009 00000000)
ACPI: HPET 0x000000007AB26C00 000038 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: MSCT 0x000000007AB26C38 000090 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: SLIT 0x000000007AB26CC8 00002D (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: SRAT 0x000000007AB26CF8 001158 (v03 ALASKA A M I 00000001 INTL 20091013)
ACPI: WDDT 0x000000007AB27E50 000040 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: SSDT 0x000000007AB27E90 0170C7 (v02 ALASKA PmMgt 00000001 INTL 20120913)
ACPI: SSDT 0x000000007AB3EF58 002652 (v02 ALASKA SpsNm 00000002 INTL 20120913)
ACPI: SSDT 0x000000007AB415B0 000064 (v02 ALASKA SpsNvs 00000002 INTL 20120913)
ACPI: PRAD 0x000000007AB41618 000102 (v02 ALASKA A M I 00000002 INTL 20120913)
ACPI: DMAR 0x000000007AB41720 000110 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: HEST 0x000000007AB41830 0000A8 (v01 ALASKA A M I 00000001 INTL 00000001)
ACPI: BERT 0x000000007AB418D8 000030 (v01 ALASKA A M I 00000001 INTL 00000001)
ACPI: ERST 0x000000007AB41908 000230 (v01 ALASKA A M I 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x0a -> Node 0
SRAT: PXM 0 -> APIC 0x10 -> Node 0
SRAT: PXM 0 -> APIC 0x12 -> Node 0
SRAT: PXM 0 -> APIC 0x14 -> Node 0
SRAT: PXM 0 -> APIC 0x16 -> Node 0
SRAT: PXM 0 -> APIC 0x18 -> Node 0
SRAT: PXM 0 -> APIC 0x1a -> Node 0
SRAT: PXM 1 -> APIC 0x20 -> Node 1
SRAT: PXM 1 -> APIC 0x22 -> Node 1
SRAT: PXM 1 -> APIC 0x24 -> Node 1
SRAT: PXM 1 -> APIC 0x26 -> Node 1
SRAT: PXM 1 -> APIC 0x28 -> Node 1
SRAT: PXM 1 -> APIC 0x2a -> Node 1
SRAT: PXM 1 -> APIC 0x30 -> Node 1
SRAT: PXM 1 -> APIC 0x32 -> Node 1
SRAT: PXM 1 -> APIC 0x34 -> Node 1
SRAT: PXM 1 -> APIC 0x36 -> Node 1
SRAT: PXM 1 -> APIC 0x38 -> Node 1
SRAT: PXM 1 -> APIC 0x3a -> Node 1
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x0b -> Node 0
SRAT: PXM 0 -> APIC 0x11 -> Node 0
SRAT: PXM 0 -> APIC 0x13 -> Node 0
SRAT: PXM 0 -> APIC 0x15 -> Node 0
SRAT: PXM 0 -> APIC 0x17 -> Node 0
SRAT: PXM 0 -> APIC 0x19 -> Node 0
SRAT: PXM 0 -> APIC 0x1b -> Node 0
SRAT: PXM 1 -> APIC 0x21 -> Node 1
SRAT: PXM 1 -> APIC 0x23 -> Node 1
SRAT: PXM 1 -> APIC 0x25 -> Node 1
SRAT: PXM 1 -> APIC 0x27 -> Node 1
SRAT: PXM 1 -> APIC 0x29 -> Node 1
SRAT: PXM 1 -> APIC 0x2b -> Node 1
SRAT: PXM 1 -> APIC 0x31 -> Node 1
SRAT: PXM 1 -> APIC 0x33 -> Node 1
SRAT: PXM 1 -> APIC 0x35 -> Node 1
SRAT: PXM 1 -> APIC 0x37 -> Node 1
SRAT: PXM 1 -> APIC 0x39 -> Node 1
SRAT: PXM 1 -> APIC 0x3b -> Node 1
SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x107fffffff]
NUMA: Initialized distance table, cnt=2
NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x107fffffff] -> [mem 0x00000000-0x107fffffff]
NODE_DATA(0) allocated [mem 0x107ffeb000-0x107fffcfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000107fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x000000007896afff]
node 0: [mem 0x0000000100000000-0x000000107fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000107fffffff]
On node 0 totalpages: 16746760
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 7654 pages used for memmap
DMA32 zone: 489835 pages, LIFO batch:31
Normal zone: 253952 pages used for memmap
Normal zone: 16252928 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x20] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x22] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x24] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x26] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x28] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x2a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x30] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x32] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x34] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x36] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x38] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x3a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x21] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x23] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x25] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x27] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x29] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x2b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x31] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x33] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x35] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x37] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x39] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x3b] high edge lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
IOAPIC[2]: apic_id 3, version 32, address 0xfec40000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 48 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x7896b000-0x7aae1fff]
PM: Registered nosave memory: [mem 0x7aae2000-0x7ab52fff]
PM: Registered nosave memory: [mem 0x7ab53000-0x7b9d3fff]
PM: Registered nosave memory: [mem 0x7b9d4000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x90000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:1024 nr_cpumask_bits:48 nr_cpu_ids:48 nr_node_ids:2
PERCPU: Embedded 34 pages/cpu @ffff88103ea00000 s98712 r8192 d32360 u262144
pcpu-alloc: s98712 r8192 d32360 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
pcpu-alloc: [0] 32 33 34 35 36 37 38 39 [0] 40 41 42 43 44 45 46 47
Built 1 zonelists in Node order, mobility grouping on. Total pages: 16485069
Policy zone: Normal
log_buf_len individual max cpu contribution: 4096 bytes
log_buf_len total cpu_extra contributions: 192512 bytes
log_buf_len min size: 262144 bytes
log_buf_len: 524288 bytes
early log buf free: 245636(93%)
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 65831184K/66987040K available (7831K kernel code, 1307K rwdata, 3444K rodata, 1528K init, 1544K bss, 1155856K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=48, Nodes=2
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=48.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=48
NR_IRQS:65792 nr_irqs:1624 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-47.
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 2394.727 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.45 BogoMIPS (lpj=2394727)
pid_max: default: 49152 minimum: 384
ACPI: Core revision 20150930
ACPI: 4 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 28K (ffffffff81ec6000 - ffffffff81ecd000)
ftrace: allocating 29532 entries in 116 pages
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffc000 flags: 0x0
DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020df
DMAR: DRHD base: 0x000000bfffc000 flags: 0x1
DMAR: dmar1: reg_base_addr bfffc000 ver 1:0 cap d2078c106f0466 ecap f020df
DMAR: RMRR base: 0x0000007db7e000 end: 0x0000007db8dfff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000bfffc000 proximity domain: 0x0
DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x1
DMAR-IR: IOAPIC id 3 under DRHD base 0xfbffc000 IOMMU 0
DMAR-IR: IOAPIC id 1 under DRHD base 0xbfffc000 IOMMU 1
DMAR-IR: IOAPIC id 2 under DRHD base 0xbfffc000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xbfffc000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Genuine Intel(R) CPU @ 2.40GHz (family: 0x6, model: 0x3f, stepping: 0x1)
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 #22 #23 #24 #25 #26 #27 #28 #29 #30 #31 #32 #33 #34 #35 #36 #37 #38 #39 #40 #41 #42 #43 #44 #45 #46 #47
x86: Booted up 1 node, 48 CPUs
smpboot: Total of 48 processors activated (230041.63 BogoMIPS)
devtmpfs: initialized
memory block size : 2048MB
PM: Registering ACPI NVS region [mem 0x7ab53000-0x7b9d3fff] (15208448 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pinctrl core: initialized pinctrl subsystem
RTC time: 9:13:16, date: 04/25/16
NET: Registered protocol family 16
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: PRAD 0x0000000000000000 000102 (v02 ALASKA A M I 00000002 INTL 20120913)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [UNC1] (domain 0000 [bus ff])
acpi PNP0A03:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:02: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:08.0: [8086:2f80] type 00 class 0x088000
pci 0000:ff:08.2: [8086:2f32] type 00 class 0x110100
pci 0000:ff:08.3: [8086:2f83] type 00 class 0x088000
pci 0000:ff:09.0: [8086:2f90] type 00 class 0x088000
pci 0000:ff:09.2: [8086:2f33] type 00 class 0x110100
pci 0000:ff:09.3: [8086:2f93] type 00 class 0x088000
pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100
pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:2fe4] type 00 class 0x088000
pci 0000:ff:0c.5: [8086:2fe5] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:2fe6] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:2fe7] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:2fe8] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:2fe9] type 00 class 0x088000
pci 0000:ff:0d.2: [8086:2fea] type 00 class 0x088000
pci 0000:ff:0d.3: [8086:2feb] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:2ffa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:2ffb] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100
pci 0000:ff:12.4: [8086:2f60] type 00 class 0x088000
pci 0000:ff:12.5: [8086:2f38] type 00 class 0x110100
pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000
pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000
pci 0000:ff:14.4: [8086:2fbc] type 00 class 0x088000
pci 0000:ff:14.5: [8086:2fbd] type 00 class 0x088000
pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000
pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000
pci 0000:ff:16.1: [8086:2f79] type 00 class 0x088000
pci 0000:ff:16.2: [8086:2f6a] type 00 class 0x088000
pci 0000:ff:16.3: [8086:2f6b] type 00 class 0x088000
pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000
pci 0000:ff:17.1: [8086:2fd1] type 00 class 0x088000
pci 0000:ff:17.2: [8086:2fd2] type 00 class 0x088000
pci 0000:ff:17.3: [8086:2fd3] type 00 class 0x088000
pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000
pci 0000:ff:1e.3: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus 7f])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:7f
pci_bus 0000:7f: root bus resource [bus 7f]
pci 0000:7f:08.0: [8086:2f80] type 00 class 0x088000
pci 0000:7f:08.2: [8086:2f32] type 00 class 0x110100
pci 0000:7f:08.3: [8086:2f83] type 00 class 0x088000
pci 0000:7f:09.0: [8086:2f90] type 00 class 0x088000
pci 0000:7f:09.2: [8086:2f33] type 00 class 0x110100
pci 0000:7f:09.3: [8086:2f93] type 00 class 0x088000
pci 0000:7f:0b.0: [8086:2f81] type 00 class 0x088000
pci 0000:7f:0b.1: [8086:2f36] type 00 class 0x110100
pci 0000:7f:0b.2: [8086:2f37] type 00 class 0x110100
pci 0000:7f:0c.0: [8086:2fe0] type 00 class 0x088000
pci 0000:7f:0c.1: [8086:2fe1] type 00 class 0x088000
pci 0000:7f:0c.2: [8086:2fe2] type 00 class 0x088000
pci 0000:7f:0c.3: [8086:2fe3] type 00 class 0x088000
pci 0000:7f:0c.4: [8086:2fe4] type 00 class 0x088000
pci 0000:7f:0c.5: [8086:2fe5] type 00 class 0x088000
pci 0000:7f:0c.6: [8086:2fe6] type 00 class 0x088000
pci 0000:7f:0c.7: [8086:2fe7] type 00 class 0x088000
pci 0000:7f:0d.0: [8086:2fe8] type 00 class 0x088000
pci 0000:7f:0d.1: [8086:2fe9] type 00 class 0x088000
pci 0000:7f:0d.2: [8086:2fea] type 00 class 0x088000
pci 0000:7f:0d.3: [8086:2feb] type 00 class 0x088000
pci 0000:7f:0f.0: [8086:2ff8] type 00 class 0x088000
pci 0000:7f:0f.1: [8086:2ff9] type 00 class 0x088000
pci 0000:7f:0f.2: [8086:2ffa] type 00 class 0x088000
pci 0000:7f:0f.3: [8086:2ffb] type 00 class 0x088000
pci 0000:7f:0f.4: [8086:2ffc] type 00 class 0x088000
pci 0000:7f:0f.5: [8086:2ffd] type 00 class 0x088000
pci 0000:7f:0f.6: [8086:2ffe] type 00 class 0x088000
pci 0000:7f:10.0: [8086:2f1d] type 00 class 0x088000
pci 0000:7f:10.1: [8086:2f34] type 00 class 0x110100
pci 0000:7f:10.5: [8086:2f1e] type 00 class 0x088000
pci 0000:7f:10.6: [8086:2f7d] type 00 class 0x110100
pci 0000:7f:10.7: [8086:2f1f] type 00 class 0x088000
pci 0000:7f:12.0: [8086:2fa0] type 00 class 0x088000
pci 0000:7f:12.1: [8086:2f30] type 00 class 0x110100
pci 0000:7f:12.4: [8086:2f60] type 00 class 0x088000
pci 0000:7f:12.5: [8086:2f38] type 00 class 0x110100
pci 0000:7f:13.0: [8086:2fa8] type 00 class 0x088000
pci 0000:7f:13.1: [8086:2f71] type 00 class 0x088000
pci 0000:7f:13.2: [8086:2faa] type 00 class 0x088000
pci 0000:7f:13.3: [8086:2fab] type 00 class 0x088000
pci 0000:7f:13.6: [8086:2fae] type 00 class 0x088000
pci 0000:7f:13.7: [8086:2faf] type 00 class 0x088000
pci 0000:7f:14.0: [8086:2fb0] type 00 class 0x088000
pci 0000:7f:14.1: [8086:2fb1] type 00 class 0x088000
pci 0000:7f:14.2: [8086:2fb2] type 00 class 0x088000
pci 0000:7f:14.3: [8086:2fb3] type 00 class 0x088000
pci 0000:7f:14.4: [8086:2fbc] type 00 class 0x088000
pci 0000:7f:14.5: [8086:2fbd] type 00 class 0x088000
pci 0000:7f:14.6: [8086:2fbe] type 00 class 0x088000
pci 0000:7f:14.7: [8086:2fbf] type 00 class 0x088000
pci 0000:7f:16.0: [8086:2f68] type 00 class 0x088000
pci 0000:7f:16.1: [8086:2f79] type 00 class 0x088000
pci 0000:7f:16.2: [8086:2f6a] type 00 class 0x088000
pci 0000:7f:16.3: [8086:2f6b] type 00 class 0x088000
pci 0000:7f:16.6: [8086:2f6e] type 00 class 0x088000
pci 0000:7f:16.7: [8086:2f6f] type 00 class 0x088000
pci 0000:7f:17.0: [8086:2fd0] type 00 class 0x088000
pci 0000:7f:17.1: [8086:2fd1] type 00 class 0x088000
pci 0000:7f:17.2: [8086:2fd2] type 00 class 0x088000
pci 0000:7f:17.3: [8086:2fd3] type 00 class 0x088000
pci 0000:7f:17.4: [8086:2fb8] type 00 class 0x088000
pci 0000:7f:17.5: [8086:2fb9] type 00 class 0x088000
pci 0000:7f:17.6: [8086:2fba] type 00 class 0x088000
pci 0000:7f:17.7: [8086:2fbb] type 00 class 0x088000
pci 0000:7f:1e.0: [8086:2f98] type 00 class 0x088000
pci 0000:7f:1e.1: [8086:2f99] type 00 class 0x088000
pci 0000:7f:1e.2: [8086:2f9a] type 00 class 0x088000
pci 0000:7f:1e.3: [8086:2fc0] type 00 class 0x088000
pci 0000:7f:1e.3: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
pci 0000:7f:1e.4: [8086:2f9c] type 00 class 0x088000
pci 0000:7f:1f.0: [8086:2f88] type 00 class 0x088000
pci 0000:7f:1f.2: [8086:2f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x1000-0x7fff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xbfffbfff window]
pci_bus 0000:00: root bus resource [bus 00-7e]
pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:2f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:2f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xbff1d000-0xbff1dfff]
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601
pci 0000:00:11.4: reg 0x10: [io 0x7110-0x7117]
pci 0000:00:11.4: reg 0x14: [io 0x7100-0x7103]
pci 0000:00:11.4: reg 0x18: [io 0x70f0-0x70f7]
pci 0000:00:11.4: reg 0x1c: [io 0x70e0-0x70e3]
pci 0000:00:11.4: reg 0x20: [io 0x7020-0x703f]
pci 0000:00:11.4: reg 0x24: [mem 0xbff1c000-0xbff1c7ff]
pci 0000:00:11.4: PME# supported from D3hot
pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xbff00000-0xbff0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xbff1b000-0xbff1b00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: [8086:8d3b] type 00 class 0x078000
pci 0000:00:16.1: reg 0x10: [mem 0xbff1a000-0xbff1a00f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xbff18000-0xbff183ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xbff10000-0xbff13fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:8d14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8d16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xbff17000-0xbff173ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8d44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x7070-0x7077]
pci 0000:00:1f.2: reg 0x14: [io 0x7060-0x7063]
pci 0000:00:1f.2: reg 0x18: [io 0x7050-0x7057]
pci 0000:00:1f.2: reg 0x1c: [io 0x7040-0x7043]
pci 0000:00:1f.2: reg 0x20: [io 0x7000-0x701f]
pci 0000:00:1f.2: reg 0x24: [mem 0xbff16000-0xbff167ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xbff15000-0xbff150ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
pci 0000:01:00.0: [1b6f:7052] type 00 class 0x0c0330
pci 0000:01:00.0: reg 0x10: [mem 0xbfe00000-0xbfe07fff 64bit]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xbfe00000-0xbfefffff]
pci 0000:02:00.0: [1b73:1100] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xbfd00000-0xbfd0ffff 64bit]
pci 0000:02:00.0: reg 0x18: [mem 0xbfd11000-0xbfd11fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xbfd10000-0xbfd10fff 64bit]
pci 0000:02:00.0: supports D1
pci 0000:02:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [mem 0xbfd00000-0xbfdfffff]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [8086:1533] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [mem 0xbfc00000-0xbfc7ffff]
pci 0000:04:00.0: reg 0x18: [io 0x6000-0x601f]
pci 0000:04:00.0: reg 0x1c: [mem 0xbfc80000-0xbfc83fff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.2: bridge window [mem 0xbfc00000-0xbfcfffff]
pci 0000:05:00.0: [8086:1533] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xbfb00000-0xbfb7ffff]
pci 0000:05:00.0: reg 0x18: [io 0x5000-0x501f]
pci 0000:05:00.0: reg 0x1c: [mem 0xbfb80000-0xbfb83fff]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.3: bridge window [mem 0xbfb00000-0xbfbfffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-fe])
acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:80
pci_bus 0000:80: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:80: root bus resource [io 0x8000-0xffff window]
pci_bus 0000:80: root bus resource [io 0x03b0-0x03bb window]
pci_bus 0000:80: root bus resource [io 0x03c0-0x03df window]
pci_bus 0000:80: root bus resource [mem 0xc0000000-0xfbffbfff window]
pci_bus 0000:80: root bus resource [bus 80-fe]
pci 0000:80:01.0: [8086:2f02] type 01 class 0x060400
pci 0000:80:01.0: PME# supported from D0 D3hot D3cold
pci 0000:80:01.0: System wakeup disabled by ACPI
pci 0000:80:02.0: [8086:2f04] type 01 class 0x060400
pci 0000:80:02.0: PME# supported from D0 D3hot D3cold
pci 0000:80:02.0: System wakeup disabled by ACPI
pci 0000:80:05.0: [8086:2f28] type 00 class 0x088000
pci 0000:80:05.1: [8086:2f29] type 00 class 0x088000
pci 0000:80:05.2: [8086:2f2a] type 00 class 0x088000
pci 0000:80:05.4: [8086:2f2c] type 00 class 0x080020
pci 0000:80:05.4: reg 0x10: [mem 0xf9100000-0xf9100fff]
pci 0000:81:00.0: [10de:1401] type 00 class 0x030000
pci 0000:81:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:81:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:81:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:81:00.0: reg 0x24: [io 0xf000-0xf07f]
pci 0000:81:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:81:00.1: [10de:0fba] type 00 class 0x040300
pci 0000:81:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
pci 0000:80:01.0: PCI bridge to [bus 81]
pci 0000:80:01.0: bridge window [io 0xf000-0xffff]
pci 0000:80:01.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:80:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:82:00.0: [10de:1401] type 00 class 0x030000
pci 0000:82:00.0: reg 0x10: [mem 0xf8000000-0xf8ffffff]
pci 0000:82:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:82:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:82:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:82:00.0: reg 0x30: [mem 0xf9000000-0xf907ffff pref]
pci 0000:82:00.1: [10de:0fba] type 00 class 0x040300
pci 0000:82:00.1: reg 0x10: [mem 0xf9080000-0xf9083fff]
pci 0000:80:02.0: PCI bridge to [bus 82]
pci 0000:80:02.0: bridge window [io 0xe000-0xefff]
pci 0000:80:02.0: bridge window [mem 0xf8000000-0xf90fffff]
pci 0000:80:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:80: on NUMA node 1
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 *7 9 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: Enabled 1 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:81:00.0
vgaarb: device added: PCI:0000:81:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:82:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:82:00.0
vgaarb: bridge control possible 0000:81:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0x7896b000-0x7bffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x0400-0x047f] could not be reserved
system 00:01: [io 0x0580-0x059f] has been reserved
system 00:01: [io 0x0600-0x061f] has been reserved
system 00:01: [io 0x0880-0x0883] has been reserved
system 00:01: [io 0x0800-0x081f] has been reserved
system 00:01: [mem 0xfed1c000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0290-0x029f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c31 (active)
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xbfe00000-0xbfefffff]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [mem 0xbfd00000-0xbfdfffff]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.2: bridge window [mem 0xbfc00000-0xbfcfffff]
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.3: bridge window [mem 0xbfb00000-0xbfbfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x1000-0x7fff window]
pci_bus 0000:00: resource 6 [mem 0x90000000-0xbfffbfff window]
pci_bus 0000:01: resource 1 [mem 0xbfe00000-0xbfefffff]
pci_bus 0000:02: resource 1 [mem 0xbfd00000-0xbfdfffff]
pci_bus 0000:04: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:04: resource 1 [mem 0xbfc00000-0xbfcfffff]
pci_bus 0000:05: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:05: resource 1 [mem 0xbfb00000-0xbfbfffff]
pci 0000:80:01.0: PCI bridge to [bus 81]
pci 0000:80:01.0: bridge window [io 0xf000-0xffff]
pci 0000:80:01.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:80:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:80:02.0: PCI bridge to [bus 82]
pci 0000:80:02.0: bridge window [io 0xe000-0xefff]
pci 0000:80:02.0: bridge window [mem 0xf8000000-0xf90fffff]
pci 0000:80:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:80: resource 4 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:80: resource 5 [io 0x8000-0xffff window]
pci_bus 0000:80: resource 6 [io 0x03b0-0x03bb window]
pci_bus 0000:80: resource 7 [io 0x03c0-0x03df window]
pci_bus 0000:80: resource 8 [mem 0xc0000000-0xfbffbfff window]
pci_bus 0000:81: resource 0 [io 0xf000-0xffff]
pci_bus 0000:81: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:81: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:82: resource 0 [io 0xe000-0xefff]
pci_bus 0000:82: resource 1 [mem 0xf8000000-0xf90fffff]
pci_bus 0000:82: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 32768 (order: 8, 1048576 bytes)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
NET: Registered protocol family 1
PCI: CLS mismatch (64 != 32), using 64 bytes
pci 0000:81:00.0: Video device with shadowed ROM
Unpacking initramfs...
Freeing initrd memory: 17016K (ffff880035eb4000 - ffff880036f52000)
DMAR: [Firmware Bug]: RMRR entry for device 01:00.0 is broken - applying workaround
DMAR: [Firmware Bug]: RMRR entry for device 02:00.0 is broken - applying workaround
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x7496b000-0x7896b000] (64MB) mapped at [ffff88007496b000-ffff88007896afff]
RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 655360 ms ovfl timer
hw unit of domain pp0-core 2^-14 Joules
hw unit of domain package 2^-14 Joules
hw unit of domain dram 2^-16 Joules
Intel CQM monitoring enabled
futex hash table entries: 16384 (order: 8, 1048576 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1461575595.837:1): initialized
Initialise system trusted keyring
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Key type big_key registered
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
aer 0000:00:01.0:pcie02: service driver aer loaded
aer 0000:00:03.0:pcie02: service driver aer loaded
aer 0000:80:01.0:pcie02: service driver aer loaded
aer 0000:80:02.0:pcie02: service driver aer loaded
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:80:01.0: Signaling PME through PCIe PME interrupt
pci 0000:81:00.0: Signaling PME through PCIe PME interrupt
pci 0000:81:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:80:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:80:02.0: Signaling PME through PCIe PME interrupt
pci 0000:82:00.0: Signaling PME through PCIe PME interrupt
pci 0000:82:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:80:02.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4.1 model 0x3F
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:11.4: version 3.0
ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.4: flags: 64bit ncq pm led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xbff1c000 port 0xbff1c100 irq 29
ata2: SATA max UDMA/133 abar m2048@0xbff1c000 port 0xbff1c180 irq 29
ata3: SATA max UDMA/133 abar m2048@0xbff1c000 port 0xbff1c200 irq 29
ata4: SATA max UDMA/133 abar m2048@0xbff1c000 port 0xbff1c280 irq 29
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
scsi host8: ahci
scsi host9: ahci
ata5: SATA max UDMA/133 abar m2048@0xbff16000 port 0xbff16100 irq 32
ata6: SATA max UDMA/133 abar m2048@0xbff16000 port 0xbff16180 irq 32
ata7: SATA max UDMA/133 abar m2048@0xbff16000 port 0xbff16200 irq 32
ata8: SATA max UDMA/133 abar m2048@0xbff16000 port 0xbff16280 irq 32
ata9: SATA max UDMA/133 abar m2048@0xbff16000 port 0xbff16300 irq 32
ata10: SATA max UDMA/133 abar m2048@0xbff16000 port 0xbff16380 irq 32
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 19, io mem 0xbff18000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.7-300.fc23.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0xbff17000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.7-300.fc23.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.4.7-300.fc23.x86_64 xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.4.7-300.fc23.x86_64 xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:01:00.0: hcc params 0x040040a5 hci version 0x100 quirks 0x00000010
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.4.7-300.fc23.x86_64 xhci-hcd
usb usb5: SerialNumber: 0000:01:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.4.7-300.fc23.x86_64 xhci-hcd
usb usb6: SerialNumber: 0000:01:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 7
xhci_hcd 0000:02:00.0: hcc params 0x200071e1 hci version 0x100 quirks 0x00000010
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 4.4.7-300.fc23.x86_64 xhci-hcd
usb usb7: SerialNumber: 0000:02:00.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 4.4.7-300.fc23.x86_64 xhci-hcd
usb usb8: SerialNumber: 0000:02:00.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 4 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
ip_tables: (C) 2000-2006 Netfilter Core Team
Initializing XFRM netlink socket
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
microcode: CPU0 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU1 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU2 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU3 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU4 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU5 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU6 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU7 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU8 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU9 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU10 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU11 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU12 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU13 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU14 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU15 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU16 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU17 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU18 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU19 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU20 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU21 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU22 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU23 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU24 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU25 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU26 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU27 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU28 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU29 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU30 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU31 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU32 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU33 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU34 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU35 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU36 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU37 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU38 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU39 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU40 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU41 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU42 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU43 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU44 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU45 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU46 sig=0x306f1, pf=0x1, revision=0x14
microcode: CPU47 sig=0x306f1, pf=0x1, revision=0x14
microcode: Microcode Update Driver: v2.01 , Peter Oruba
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Fedora kernel signing key: 72bbf7ab46ebf21095fa25a109147d52fe8cf79a'
zswap: loaded using pool lzo/zbud
Magic number: 12:985:222
acpi device:1d1: hash matches
rtc_cmos 00:00: setting system clock to 2016-04-25 09:13:17 UTC (1461575597)
PM: Hibernation image not present or could not be loaded.
usb 8-3: new SuperSpeed USB device number 2 using xhci_hcd
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata8.00: ATA-8: ST2000DM001-9YN164, CC4B, max UDMA/133
ata8.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata8.00: configured for UDMA/133
ata10.00: ATAPI: MATSHITABD-MLT UJ260AF, 1.00, max UDMA/133
ata7.00: supports DRM functions and may not be fully accessible
ata7.00: READ LOG DMA EXT failed, trying unqueued
ata7.00: failed to get NCQ Send/Recv Log Emask 0x1
ata7.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT01B6Q, max UDMA/133
ata7.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata7.00: supports DRM functions and may not be fully accessible
ata7.00: failed to get NCQ Send/Recv Log Emask 0x1
ata7.00: configured for UDMA/133
ata10.00: configured for UDMA/133
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata5.00: ATA-9: ST1000LM014-1EJ164, SM36, max UDMA/133
ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
usb 3-6: new full-speed USB device number 2 using xhci_hcd
usb 5-2: new full-speed USB device number 2 using xhci_hcd
usb 7-3: new high-speed USB device number 2 using xhci_hcd
ata6.00: ATA-9: ST1000LM014-1EJ164, SM30, max UDMA/133
ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA ST1000LM014-1EJ1 SM36 PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 4:0:0:0: [sda] 4096-byte physical blocks
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 4:0:0:0: [sda] Attached SCSI disk
usb 1-1: New USB device found, idVendor=8087, idProduct=800a
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=8002
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA ST1000LM014-1EJ1 SM30 PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg1 type 0
sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 5:0:0:0: [sdb] 4096-byte physical blocks
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 6:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
sd 6:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 7:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC4B PQ: 0 ANSI: 5
sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >
sd 7:0:0:0: Attached scsi generic sg3 type 0
sd 7:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 7:0:0:0: [sdd] 4096-byte physical blocks
sd 7:0:0:0: [sdd] Write Protect is off
sd 7:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdb] Attached SCSI disk
scsi 9:0:0:0: CD-ROM MATSHITA BD-MLT UJ260AF 1.00 PQ: 0 ANSI: 5
sdc: sdc1 sdc2
sd 6:0:0:0: [sdc] Attached SCSI disk
usb 8-3: New USB device found, idVendor=2109, idProduct=0812
usb 8-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-3: Product: USB3.0 Hub
usb 8-3: Manufacturer: VIA Labs, Inc.
sr 9:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 9:0:0:0: Attached scsi CD-ROM sr0
hub 8-3:1.0: USB hub found
sr 9:0:0:0: Attached scsi generic sg4 type 5
hub 8-3:1.0: 4 ports detected
sdd: sdd1
sd 7:0:0:0: [sdd] Attached SCSI disk
Freeing unused kernel memory: 1528K (ffffffff81d48000 - ffffffff81ec6000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 348K (ffff8800017a9000 - ffff880001800000)
Freeing unused kernel memory: 652K (ffff880001b5d000 - ffff880001c00000)
random: systemd urandom read with 42 bits of entropy available
systemd[1]: systemd 222 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
usb 3-6: New USB device found, idVendor=046d, idProduct=c318
usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-6: Product: Logitech Illuminated Keyboard
usb 3-6: Manufacturer: Logitech
usb 7-3: New USB device found, idVendor=2109, idProduct=2812
usb 7-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-3: Product: USB2.0 Hub
usb 7-3: Manufacturer: VIA Labs, Inc.
hub 7-3:1.0: USB hub found
hub 7-3:1.0: 4 ports detected
input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:046D:C318.0001/input/input5
usb 5-2: New USB device found, idVendor=046d, idProduct=c52b
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: USB Receiver
usb 5-2: Manufacturer: Logitech
hid-generic 0003:046D:C318.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:14.0-6/input0
input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/0003:046D:C318.0003/input/input6
systemd[1]: Reached target Timers.
systemd[1]: Starting Timers.
systemd[1]: Created slice -.slice.
systemd[1]: Starting -.slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Started dracut ask for additional cmdline parameters.
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Starting Journal Audit Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting Local File Systems.
systemd[1]: Reached target Sockets.
systemd[1]: Starting Sockets.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
i2c /dev entries driver
systemd[1]: Started Load Kernel Modules.
audit: type=1130 audit(1461575598.005:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Create Static Device Nodes in /dev.
audit: type=1130 audit(1461575598.006:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
hid-generic 0003:046D:C318.0003: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:14.0-6/input1
systemd[1]: Started Apply Kernel Variables.
audit: type=1130 audit(1461575598.025:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Started Setup Virtual Console.
audit: type=1130 audit(1461575598.079:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Started Journal Service.
audit: type=1130 audit(1461575598.082:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1461575598.112:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1461575598.165:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
usb 3-7: new high-speed USB device number 3 using xhci_hcd
audit: type=1130 audit(1461575598.180:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
usb 7-3.1: new full-speed USB device number 3 using xhci_hcd
tsc: Refined TSC clocksource calibration: 2394.734 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2284c8deb39, max_idle_ns: 440795290016 ns
usb 7-3.1: New USB device found, idVendor=0a5c, idProduct=21ec
usb 7-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 7-3.1: Product: BCM20702A0
usb 7-3.1: Manufacturer: Broadcom Corp
usb 7-3.1: SerialNumber: 001986000029
wmi: Mapper loaded
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
audit: type=1130 audit(1461575598.340:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
usb 3-7: New USB device found, idVendor=05e3, idProduct=0608
usb 3-7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-7: Product: USB2.0 Hub
hub 3-7:1.0: USB hub found
hub 3-7:1.0: 4 ports detected
dca service started, version 1.12.1
logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:01:00.0-2/input2
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
pps pps0: new PPS source ptp0
igb 0000:04:00.0: added PHC on eth0
igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:04:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 14:dd:a9:d4:ed:d4
igb 0000:04:00.0: eth0: PBA No: 001300-000
igb 0000:04:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
pps pps1: new PPS source ptp1
igb 0000:05:00.0: added PHC on eth1
igb 0000:05:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:05:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 14:dd:a9:d4:ed:d5
igb 0000:05:00.0: eth1: PBA No: 001300-000
igb 0000:05:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
igb 0000:04:00.0 enp4s0: renamed from eth0
usb 3-8: new high-speed USB device number 4 using xhci_hcd
igb 0000:05:00.0 enp5s0: renamed from eth1
input: Logitech MX Anywhere 2 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/usb5/5-2/5-2:1.2/0003:046D:C52B.0005/0003:046D:404A.0006/input/input7
logitech-hidpp-device 0003:046D:404A.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech MX Anywhere 2] on usb-0000:01:00.0-2:1
random: nonblocking pool is initialized
usb 3-8: New USB device found, idVendor=05e3, idProduct=0608
usb 3-8: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-8: Product: USB2.0 Hub
hub 3-8:1.0: USB hub found
hub 3-8:1.0: 4 ports detected
usb 3-7.2: new high-speed USB device number 5 using xhci_hcd
usb 3-7.2: New USB device found, idVendor=058f, idProduct=6362
usb 3-7.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-7.2: Product: Flash Card Reader/Writer
usb 3-7.2: Manufacturer: Generic
usb 3-7.2: SerialNumber: 058F63626479
usb 3-7.3: new full-speed USB device number 6 using xhci_hcd
usb 3-7.3: New USB device found, idVendor=0403, idProduct=fc0d
usb 3-7.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-7.3: Product: Crystalfontz CFA635-USB LCD
usb 3-7.3: Manufacturer: Crystalfontz
usb 3-7.3: SerialNumber: CF034972
usb 3-8.1: new full-speed USB device number 7 using xhci_hcd
usb 3-8.1: New USB device found, idVendor=067b, idProduct=2303
usb 3-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-8.1: Product: USB-Serial Controller D
usb 3-8.1: Manufacturer: Prolific Technology Inc.
usb 3-7.4: new full-speed USB device number 8 using xhci_hcd
usb 3-7.4: New USB device found, idVendor=1b1c, idProduct=1c00
usb 3-7.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-7.4: Product: Corsair Link TM USB Dongle
usb 3-7.4: Manufacturer: Silicon Labs
usb 3-7.4: SerialNumber: R58K0626
usb-storage 3-7.2:1.0: USB Mass Storage device detected
scsi host10: usb-storage 3-7.2:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
clocksource: Switched to clocksource tsc
usb 3-8.4: new full-speed USB device number 9 using xhci_hcd
usb 3-8.4: New USB device found, idVendor=067b, idProduct=2303
usb 3-8.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-8.4: Product: USB-Serial Controller D
usb 3-8.4: Manufacturer: Prolific Technology Inc.
scsi 10:0:0:0: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 4
scsi 10:0:0:1: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 4
scsi 10:0:0:2: Direct-Access Generic- MS/MS-PRO 1.03 PQ: 0 ANSI: 4 CCS
scsi 10:0:0:3: Direct-Access Generic- xD-Picture 1.02 PQ: 0 ANSI: 4
sd 10:0:0:0: Attached scsi generic sg5 type 0
sd 10:0:0:1: Attached scsi generic sg6 type 0
sd 10:0:0:2: Attached scsi generic sg7 type 0
sd 10:0:0:0: [sde] Attached SCSI removable disk
sd 10:0:0:3: Attached scsi generic sg8 type 0
sd 10:0:0:1: [sdf] Attached SCSI removable disk
sd 10:0:0:2: [sdg] Attached SCSI removable disk
sd 10:0:0:3: [sdh] Attached SCSI removable disk
usb 7-3.2: new full-speed USB device number 4 using xhci_hcd
usb 7-3.2: New USB device found, idVendor=1050, idProduct=0116
usb 7-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-3.2: Product: Yubikey NEO OTP+U2F+CCID
usb 7-3.2: Manufacturer: Yubico
usb 7-3.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Yubico Yubikey NEO OTP+U2F+CCID as /devices/pci0000:00/0000:00:03.0/0000:02:00.0/usb7/7-3/7-3.2/7-3.2:1.0/0003:1050:0116.0007/input/input8
hid-generic 0003:1050:0116.0007: input,hidraw4: USB HID v1.10 Keyboard [Yubico Yubikey NEO OTP+U2F+CCID] on usb-0000:02:00.0-3.2/input0
hid-generic 0003:1050:0116.0008: hiddev0,hidraw5: USB HID v1.10 Device [Yubico Yubikey NEO OTP+U2F+CCID] on usb-0000:02:00.0-3.2/input1
audit_printk_skb: 6 callbacks suppressed
audit: type=1130 audit(1461575604.348:13): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1130 audit(1461575604.545:14): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1461575604.545:15): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1461575604.703:16): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1461575604.720:17): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1461575604.720:18): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1461575604.722:19): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1461575604.723:20): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1461575604.723:21): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1461575604.723:22): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd-journald[525]: Received SIGTERM from PID 1 (systemd).
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
systemd[1]: RTC configured in localtime, applying delta of -420 minutes to system time.
EXT4-fs (sdb5): re-mounted. Opts: (null)
systemd-journald[935]: File /var/log/journal/ecb8ec9ddefa4fc3833837349680792c/system.journal corrupted or uncleanly shut down, renaming and replacing.
systemd-journald[935]: Received request to flush runtime journal from PID 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
tpm_tis 00:05: 1.2 TPM (device-id 0xB, rev-id 16)
power_meter ACPI000D:00: Found ACPI power meter.
power_meter ACPI000D:00: Ignoring unsafe software power cap!
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Unable to find any System Interface(s)
IPMI SSIF Interface driver
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
EDAC MC: Ver: 3.0.0
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2f60
EDAC sbridge: Seeking for: PCI ID 8086:2f60
EDAC sbridge: Seeking for: PCI ID 8086:2f60
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fac
EDAC sbridge: Seeking for: PCI ID 8086:2fad
EDAC sbridge: Seeking for: PCI ID 8086:2fbd
EDAC sbridge: Seeking for: PCI ID 8086:2fbd
EDAC sbridge: Seeking for: PCI ID 8086:2fbd
EDAC sbridge: Seeking for: PCI ID 8086:2fbf
EDAC sbridge: Seeking for: PCI ID 8086:2fbf
EDAC sbridge: Seeking for: PCI ID 8086:2fbf
EDAC sbridge: Seeking for: PCI ID 8086:2fb9
EDAC sbridge: Seeking for: PCI ID 8086:2fb9
EDAC sbridge: Seeking for: PCI ID 8086:2fb9
EDAC sbridge: Seeking for: PCI ID 8086:2fbb
EDAC sbridge: Seeking for: PCI ID 8086:2fbb
EDAC sbridge: Seeking for: PCI ID 8086:2fbb
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f79
EDAC sbridge: Seeking for: PCI ID 8086:2f79
EDAC sbridge: Seeking for: PCI ID 8086:2f79
EDAC sbridge: Seeking for: PCI ID 8086:2f6a
EDAC sbridge: Seeking for: PCI ID 8086:2f6a
EDAC sbridge: Seeking for: PCI ID 8086:2f6a
EDAC sbridge: Seeking for: PCI ID 8086:2f6b
EDAC sbridge: Seeking for: PCI ID 8086:2f6b
EDAC sbridge: Seeking for: PCI ID 8086:2f6b
EDAC sbridge: Seeking for: PCI ID 8086:2f6c
EDAC sbridge: Seeking for: PCI ID 8086:2f6d
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Couldn't find mci handler
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input9
asus_wmi: Number of fans: 1
mei_me 0000:00:16.0: Device doesn't have valid ME Interface
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
snd_hda_intel 0000:81:00.1: Disabling MSI
snd_hda_intel 0000:81:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:82:00.1: Disabling MSI
snd_hda_intel 0000:82:00.1: Handle vga_switcheroo audio client
usbcore: registered new interface driver btusb
Bluetooth: hci0: BCM: chip id 63
Bluetooth: hci0: BCM20702A
Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21ec.hcd failed with error -2
Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21ec.hcd not found
[drm] Initialized drm 1.1.0 20060810
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
bcache: register_bdev() registered backing device sdd1
Adding 134217724k swap on /dev/sdb3. Priority:-1 extents:1 across:134217724k FS
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
vgaarb: device changed decodes: PCI:0000:81:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
nvidia 0000:82:00.0: enabling device (0100 -> 0103)
vgaarb: device changed decodes: PCI:0000:82:00.0,olddecodes=io+mem,decodes=none:owns=none
nvidia-nvlink: Nvlink Core is being initialized, major device number 243
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:81:00.0 on minor 0
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:82:00.0 on minor 1
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 358.16 Mon Nov 16 19:25:55 PST 2015
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:80/0000:80:01.0/0000:81:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:80/0000:80:01.0/0000:81:00.1/sound/card1/input19
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:80/0000:80:01.0/0000:81:00.1/sound/card1/input20
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:80/0000:80:01.0/0000:81:00.1/sound/card1/input21
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:80/0000:80:02.0/0000:82:00.1/sound/card2/input22
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:80/0000:80:02.0/0000:82:00.1/sound/card2/input23
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:80/0000:80:02.0/0000:82:00.1/sound/card2/input24
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:80/0000:80:02.0/0000:82:00.1/sound/card2/input25
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain dram
intel_rapl: DRAM domain energy unit 15300pj
intel_rapl: Found RAPL domain package
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
bcache: bch_journal_replay() journal replay done, 29 keys in 5 entries, seq 950458
bcache: bch_cached_dev_attach() Caching sdd1 as bcache0 on set e2e49184-7685-4c93-bd70-0e0339dfc3fe
bcache: register_cache() registered cache device sdc2
audit_printk_skb: 126 callbacks suppressed
audit: type=1130 audit(1461600809.755:65): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill@rfkill0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
usbcore: registered new interface driver cp210x
cp210x 3-7.4:1.0: cp210x converter detected
usb 3-7.4: cp210x converter now attached to ttyUSB0
usbcore: registered new interface driver pl2303
pl2303 3-8.1:1.0: pl2303 converter detected
usb 3-8.1: pl2303 converter now attached to ttyUSB1
pl2303 3-8.4:1.0: pl2303 converter detected
usb 3-8.4: pl2303 converter now attached to ttyUSB2
usbcore: registered new interface driver ftdi_sio
ftdi_sio 3-7.3:1.0: FTDI USB Serial Device converter detected
usb 3-7.3: Detected FT232RL
usb 3-7.3: FTDI USB Serial Device converter now attached to ttyUSB3
audit: type=1130 audit(1461600811.193:66): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1461600816.152:67): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1461600816.153:68): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1461600817.104:69): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-bcache0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
EXT4-fs (bcache0): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1130 audit(1461600817.191:70): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1461600817.191:71): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1461600817.192:72): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1461600817.207:73): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1461600817.207:74): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1461600817.213:75): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=fedora-import-state comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1461600817.865:76): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1305 audit(1461600817.915:77): audit_enabled=1 old=1 auid=4294967295 ses=4294967295 res=1
audit: type=1305 audit(1461600817.915:78): audit_pid=1434 old=0 auid=4294967295 ses=4294967295 res=1
nct6775: Found NCT6779D or compatible chip at 0x2e:0x290
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
IPv6: ADDRCONF(NETDEV_UP): qemu0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
device enp5s0 entered promiscuous mode
igb 0000:05:00.0 enp5s0: igb: enp5s0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
qemu0: port 1(enp5s0) entered listening state
qemu0: port 1(enp5s0) entered listening state
igb 0000:04:00.0 enp4s0: igb: enp4s0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
qemu0: port 1(enp5s0) entered learning state
loop: module loaded
qemu0: topology change detected, propagating
qemu0: port 1(enp5s0) entered forwarding state
Adjusting tsc more than 11% (5957275 vs 7776525)
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
device virbr0-nic entered promiscuous mode
Bridge firewalling registered
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
pmd_set_huge: Cannot satisfy [mem 0xf0000000-0xf0200000] with a huge-page mapping due to MTRR override.
nvidia_uvm: Loaded the UVM driver, major device number 242
systemd-journald[935]: File /var/log/journal/ecb8ec9ddefa4fc3833837349680792c/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 358.16 Mon Nov 16 18:58:09 PST 2015
nvidia-modeset: Allocated GPU:0 (GPU-9baceb1b-7a26-8bde-3736-964fdd923914) @ PCI:0000:81:00.0
nvidia-modeset: Allocated GPU:1 (GPU-3c6b4a50-fcc9-97b1-2f91-cd919efc8b61) @ PCI:0000:82:00.0
fuse init (API version 7.23)
xhci_hcd 0000:02:00.0: WARN Event TRB for slot 4 ep 4 with no TDs queued?
xhci_hcd 0000:02:00.0: WARN Event TRB for slot 4 ep 4 with no TDs queued?
xhci_hcd 0000:02:00.0: WARN Event TRB for slot 4 ep 4 with no TDs queued?
xhci_hcd 0000:02:00.0: WARN Event TRB for slot 4 ep 4 with no TDs queued?
xhci_hcd 0000:02:00.0: WARN Event TRB for slot 4 ep 4 with no TDs queued?
xhci_hcd 0000:02:00.0: WARN Event TRB for slot 4 ep 4 with no TDs queued?
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
nvidia 0000:81:00.0: Invalid ROM contents
nvidia 0000:81:00.0: Invalid ROM contents
nvidia 0000:81:00.0: Invalid ROM contents
nvidia 0000:81:00.0: Invalid ROM contents
nvidia 0000:81:00.0: Invalid ROM contents
nvidia 0000:81:00.0: Invalid ROM contents
nvidia 0000:81:00.0: Invalid ROM contents
nvidia 0000:81:00.0: Invalid ROM contents
nvidia 0000:81:00.0: Invalid ROM contents
nvidia 0000:81:00.0: Invalid ROM contents
nvidia 0000:81:00.0: Invalid ROM contents
nvidia 0000:81:00.0: Invalid ROM contents
nvidia 0000:81:00.0: Invalid ROM contents
nvidia 0000:81:00.0: Invalid ROM contents
nvidia 0000:81:00.0: Invalid ROM contents
nvidia 0000:81:00.0: Invalid ROM contents
nvidia 0000:82:00.0: Invalid ROM contents
xhci_hcd 0000:02:00.0: WARN Event TRB for slot 4 ep 4 with no TDs queued?
xhci_hcd 0000:02:00.0: WARN Event TRB for slot 4 ep 4 with no TDs queued?
xhci_hcd 0000:02:00.0: WARN Event TRB for slot 4 ep 4 with no TDs queued?
xhci_hcd 0000:02:00.0: WARN Event TRB for slot 4 ep 4 with no TDs queued?
xhci_hcd 0000:02:00.0: WARN Event TRB for slot 4 ep 4 with no TDs queued?
xhci_hcd 0000:02:00.0: WARN Event TRB for slot 4 ep 4 with no TDs queued?
xhci_hcd 0000:02:00.0: WARN Event TRB for slot 4 ep 4 with no TDs queued?
xhci_hcd 0000:02:00.0: WARN Event TRB for slot 4 ep 4 with no TDs queued?
xhci_hcd 0000:02:00.0: WARN Event TRB for slot 4 ep 4 with no TDs queued?
kuhler_1250[30253]: segfault at 6050dc ip 0000000000401780 sp 00007fff8b2139d0 error 6 in kuhler_1250[400000+3000]
kuhler_1250[30305]: segfault at 6050dc ip 0000000000401780 sp 00007fffad6c13a0 error 6 in kuhler_1250[400000+3000]
INFO: NMI handler (perf_event_nmi_handler) took too long to run: 1.011 msecs
perf interrupt took too long (8360 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf interrupt took too long (8312 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
INFO: NMI handler (perf_event_nmi_handler) took too long to run: 2.333 msecs
perf interrupt took too long (19171 > 9615), lowering kernel.perf_event_max_sample_rate to 13000