dmesg - test1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-67-generic (buildd@lcy01-10) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #110-Ubuntu SMP Fri Oct 23 13:25:18 UTC 2015 (Ubuntu 3.13.0-67.110-generic 3.13.11-ckt27)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bffc2e3f] usable
BIOS-e820: [mem 0x00000000bffc2e40-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: Hewlett-Packard HP xw8400 Workstation/0A08h, BIOS 786D5 v02.23 06/12/2007
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x240000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-back
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 0F80000000 write-back
1 base 0080000000 mask 0FC0000000 write-back
2 base 0100000000 mask 0F00000000 write-back
3 base 0200000000 mask 0FC0000000 write-back
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
mtrr: your BIOS has configured an incorrect mask, fixing it.
mtrr: your BIOS has configured an incorrect mask, fixing it.
mtrr: your BIOS has configured an incorrect mask, fixing it.
mtrr: your BIOS has configured an incorrect mask, fixing it.
mtrr: your BIOS has configured an incorrect mask, fixing it.
mtrr: your BIOS has configured an incorrect mask, fixing it.
mtrr: your BIOS has configured an incorrect mask, fixing it.
mtrr: your BIOS has configured an incorrect mask, fixing it.
e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
found SMP MP-table at [mem 0x000fffc0-0x000fffcf] mapped at [c00fffc0]
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37800000-0x379fffff]
[mem 0x37800000-0x379fffff] page 2M
init_memory_mapping: [mem 0x34000000-0x377fffff]
[mem 0x34000000-0x377fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x33ffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x33ffffff] page 2M
init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[mem 0x37a00000-0x37bfdfff] page 4k
BRK [0x01b9d000, 0x01b9dfff] PGTABLE
RAMDISK: [mem 0x7e617000-0x7fffefff]
Allocated new RAMDISK: [mem 0x36216000-0x37bfd408]
Move RAMDISK from [mem 0x7e617000-0x7fffe408] to [mem 0x36216000-0x37bfd408]
ACPI: RSDP 000e9e10 000024 (v02 COMPAQ)
ACPI: XSDT bffc58ec 000064 (v01 HPQOEM SLIC-WKS 20070612 00000000)
ACPI: FACP bffc5a94 0000F4 (v03 COMPAQ GREENCRK 00000001 00000000)
ACPI BIOS Error (bug): 32/64X address mismatch in FADT/Gpe0Block: 0x0000F828/0x000000000001F030, using 32 (20131115/tbfadt-462)
ACPI: DSDT bffc5ee2 002171 (v01 COMPAQ DSDT 00000001 MSFT 0100000E)
ACPI: FACS bffc5800 000040
ACPI: SSDT bffc8053 00773C (v01 COMPAQ PROJECT 00000001 MSFT 0100000E)
ACPI: APIC bffc5b88 0000D4 (v01 COMPAQ GREENCRK 00000001 00000000)
ACPI: ASF! bffc5c5c 00006A (v32 COMPAQ GREENCRK 00000001 00000000)
ACPI: MCFG bffc5cc6 00003C (v01 COMPAQ GREENCRK 00000001 00000000)
ACPI: TCPA bffc5eb0 000032 (v01 COMPAQ GREENCRK 00000001 00000000)
ACPI: SLIC bffc5d02 000176 (v01 HPQOEM SLIC-WKS 00000001 00000000)
ACPI: HPET bffc5e78 000038 (v01 COMPAQ GREENCRK 00000001 00000000)
ACPI: Local APIC address 0xfee00000
8324MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
BRK [0x01b9e000, 0x01b9efff] PGTABLE
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x3fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xbffc1fff]
node 0: [mem 0x00000000-0x3fffffff]
On node 0 totalpages: 2096992
free_area_init_node: node 0, pgdat c19a3780, node_mem_map f1a16020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3998 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 224254 pages, LIFO batch:31
HighMem zone: 16649 pages used for memmap
HighMem zone: 1868740 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0xf808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x08] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x09] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0b] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0c] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x0d] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec10000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec10000, GSI 24-47
ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[48])
IOAPIC[2]: apic_id 3, version 32, address 0xfec80000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 6 hotplug CPUs
nr_irqs_gsi: 88
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff]
PM: Registered nosave memory: [mem 0x000e8000-0x000fffff]
e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f1993000 s35520 r0 d21824 u57344
pcpu-alloc: s35520 r0 d21824 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2095208
Kernel command line: initrd=/casper/initrd.gz file=/cdrom/preseed/custom.seed boot=casper xdriver=vesa nomodeset quiet splash -- BOOT_IMAGE=/casper/vmlinuz
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 18874360 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:00240000)
Memory: 8255984K/8387968K available (6559K kernel code, 645K rwdata, 2772K rodata, 880K init, 924K bss, 131984K reserved, 7474960K highmem)
virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc19c1000 - 0xc1a9d000 ( 880 kB)
.data : 0xc16681c0 - 0xc19c0640 (3425 kB)
.text : 0xc1000000 - 0xc16681c0 (6560 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:1560 16
CPU 0 irqstacks, hard=f000a000 soft=f000c000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2660.053 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.10 BogoMIPS (lpj=10640212)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 32K (c1a9d000 - c1aa5000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27884 entries in 55 pages
Enabling APIC mode: Flat. Using 3 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU 5150 @ 2.66GHz (fam: 06, model: 0f, stepping: 0b)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
CPU 1 irqstacks, hard=f0122000 soft=f0124000
x86: Booting SMP configuration:
Initializing CPU#1
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (10640.21 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 11:32:11, date: 04/06/16
NET: Registered protocol family 16
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xe0000000-0xe7ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe7ffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
ACPI BIOS Error (bug): \_SB_.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20131115/nsarguments-189)
ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20131115/dsfield-211)
ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f002c7f8), AE_ALREADY_EXISTS (20131115/psparse-536)
ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM
acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
acpi PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff] (ignored)
acpi PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored)
acpi PNP0A08:00: host bridge window [mem 0xfed00000-0xfed003ff] (ignored)
acpi PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] (ignored)
acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
PCI: root bus 00: using default resources
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0x3fffffffff]
pci 0000:00:00.0: [8086:25c0] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:25e2] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:25e3] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:04.0: [8086:25fa] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:25e5] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: [8086:25e6] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: [8086:25e7] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [8086:25f0] type 00 class 0x060000
pci 0000:00:10.1: [8086:25f0] type 00 class 0x060000
pci 0000:00:10.2: [8086:25f0] type 00 class 0x060000
pci 0000:00:11.0: [8086:25f1] type 00 class 0x060000
pci 0000:00:13.0: [8086:25f3] type 00 class 0x060000
pci 0000:00:15.0: [8086:25f5] type 00 class 0x060000
pci 0000:00:16.0: [8086:25f6] type 00 class 0x060000
pci 0000:00:1b.0: [8086:269a] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xd2500000-0xd2503fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:2690] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2688] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x3000-0x301f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2689] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x3020-0x303f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:268a] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x3040-0x305f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.3: [8086:268b] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0x3060-0x307f]
pci 0000:00:1d.3: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:268c] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xd2504000-0xd25043ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2670] type 00 class 0x060100
pci 0000:00:1f.1: [8086:269e] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io 0x30c0-0x30c7]
pci 0000:00:1f.1: reg 0x14: [io 0x30e0-0x30e3]
pci 0000:00:1f.1: reg 0x18: [io 0x30c8-0x30cf]
pci 0000:00:1f.1: reg 0x1c: [io 0x30e4-0x30e7]
pci 0000:00:1f.1: reg 0x20: [io 0x30a0-0x30af]
pci 0000:00:1f.2: [8086:2680] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0x30d0-0x30d7]
pci 0000:00:1f.2: reg 0x14: [io 0x30e8-0x30eb]
pci 0000:00:1f.2: reg 0x18: [io 0x30d8-0x30df]
pci 0000:00:1f.2: reg 0x1c: [io 0x30ec-0x30ef]
pci 0000:00:1f.2: reg 0x20: [io 0x30b0-0x30bf]
pci 0000:00:1f.2: reg 0x24: [mem 0xd2504400-0xd25047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:10:00.0: [8086:3500] type 01 class 0x060400
pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
pci 0000:10:00.3: [8086:350c] type 01 class 0x060400
pci 0000:10:00.3: PME# supported from D0 D3hot D3cold
pci 0000:10:00.3: System wakeup disabled by ACPI
pci 0000:10:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:02.0: PCI bridge to [bus 10-20]
pci 0000:00:02.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:02.0: bridge window [mem 0xd4300000-0xd69fffff]
pci 0000:1e:00.0: [8086:3510] type 01 class 0x060400
pci 0000:1e:00.0: PME# supported from D0 D3hot D3cold
pci 0000:1e:00.0: System wakeup disabled by ACPI
pci 0000:1e:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:1e:01.0: [8086:3514] type 01 class 0x060400
pci 0000:1e:01.0: PME# supported from D0 D3hot D3cold
pci 0000:1e:01.0: System wakeup disabled by ACPI
pci 0000:1e:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:10:00.0: PCI bridge to [bus 1e-20]
pci 0000:10:00.0: bridge window [mem 0xd4300000-0xd4bfffff]
pci 0000:1e:00.0: PCI bridge to [bus 20]
pci 0000:1f:00.0: [14e4:1600] type 00 class 0x020000
pci 0000:1f:00.0: reg 0x10: [mem 0xd4300000-0xd430ffff 64bit]
pci 0000:1f:00.0: PME# supported from D3hot D3cold
pci 0000:1f:00.0: System wakeup disabled by ACPI
pci 0000:1f:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:1e:01.0: PCI bridge to [bus 1f]
pci 0000:1e:01.0: bridge window [mem 0xd4300000-0xd49fffff]
pci 0000:11:06.0: [1000:0050] type 00 class 0x010000
pci 0000:11:06.0: reg 0x10: [io 0x2000-0x20ff]
pci 0000:11:06.0: reg 0x14: [mem 0xd6610000-0xd6613fff 64bit]
pci 0000:11:06.0: reg 0x1c: [mem 0xd6600000-0xd660ffff 64bit]
pci 0000:11:06.0: reg 0x30: [mem 0x00000000-0x000fffff pref]
pci 0000:11:06.0: supports D1 D2
pci 0000:10:00.3: PCI bridge to [bus 11]
pci 0000:10:00.3: bridge window [io 0x2000-0x2fff]
pci 0000:10:00.3: bridge window [mem 0xd6400000-0xd66fffff]
pci 0000:00:03.0: PCI bridge to [bus 60]
pci 0000:40:00.0: [10de:10c3] type 00 class 0x030000
pci 0000:40:00.0: reg 0x10: [mem 0xd3000000-0xd3ffffff]
pci 0000:40:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:40:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:40:00.0: reg 0x24: [io 0x1000-0x107f]
pci 0000:40:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:40:00.0: System wakeup disabled by ACPI
pci 0000:40:00.1: [10de:0be3] type 00 class 0x040300
pci 0000:40:00.1: reg 0x10: [mem 0xd4200000-0xd4203fff]
pci 0000:00:04.0: PCI bridge to [bus 40]
pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:04.0: bridge window [mem 0xd3000000-0xd42fffff]
pci 0000:00:04.0: bridge window [mem 0xc0000000-0xd21fffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus fe]
pci 0000:00:06.0: PCI bridge to [bus fd]
pci 0000:00:07.0: PCI bridge to [bus fc]
pci 0000:08:00.0: [8086:032c] type 01 class 0x060400
pci 0000:08:00.0: PXH quirk detected; SHPC device MSI disabled
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:08:00.0: System wakeup disabled by ACPI
pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.0: PCI bridge to [bus 08-09]
pci 0000:08:00.0: PCI bridge to [bus 09]
pci 0000:01:05.0: [104c:8023] type 00 class 0x0c0010
pci 0000:01:05.0: reg 0x10: [mem 0xd2404000-0xd24047ff]
pci 0000:01:05.0: reg 0x14: [mem 0xd2400000-0xd2403fff]
pci 0000:01:05.0: supports D1 D2
pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd2200000-0xd24fffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x00000000-0x3fffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: setting as boot device: PCI:0000:40:00.0
vgaarb: device added: PCI:0000:40:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:40:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbffc2e40-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:03: [dma 4]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:08: [dma 3]
pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:0a: [dma 2]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:0b: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:0d: [io 0x04d0-0x04d1] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0e: [io 0x0400-0x041f] has been reserved
system 00:0e: [io 0x0420-0x043f] has been reserved
system 00:0e: [io 0x0440-0x045f] has been reserved
system 00:0e: [io 0x0460-0x047f] has been reserved
system 00:0e: [io 0x0480-0x048f] has been reserved
system 00:0e: [io 0x0490-0x049f] has been reserved
system 00:0e: [io 0xf800-0xf81f] could not be reserved
system 00:0e: [io 0xf820-0xf83f] has been reserved
system 00:0e: [io 0xf840-0xf85f] has been reserved
system 00:0e: [io 0xf860-0xf87f] has been reserved
system 00:0e: [io 0xfa00-0xfa3f] has been reserved
system 00:0e: [io 0xfc00-0xfc7f] has been reserved
system 00:0e: [io 0xfc80-0xfcff] has been reserved
system 00:0e: [io 0xfe00-0xfe7f] has been reserved
system 00:0e: [io 0xfe80-0xfeff] has been reserved
system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0f: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0f: [mem 0xffe00000-0xffffffff] has been reserved
system 00:0f: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:0f: [mem 0xfe700000-0xfe7003ff] has been reserved
system 00:0f: [mem 0xfe600000-0xfe6fffff] has been reserved
system 00:0f: [mem 0xfe000000-0xfe01ffff] has been reserved
system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:10: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:11:06.0 BAR 6 [mem 0x00000000-0x000fffff pref]
pnp 00:10: disabling [mem 0x000c0000-0x000e7fff] because it overlaps 0000:11:06.0 BAR 6 [mem 0x00000000-0x000fffff pref]
pnp 00:10: disabling [mem 0x000e8000-0x000effff] because it overlaps 0000:11:06.0 BAR 6 [mem 0x00000000-0x000fffff pref]
pnp 00:10: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:11:06.0 BAR 6 [mem 0x00000000-0x000fffff pref]
system 00:10: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:10: [mem 0xfeda0000-0xfedbffff] has been reserved
system 00:10: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:11: [mem 0xe0000000-0xefffffff] has been reserved
system 00:11: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 18 devices
ACPI: bus type PNP unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:02.0: BAR 15: assigned [mem 0xd2600000-0xd26fffff pref]
pci 0000:10:00.3: BAR 15: assigned [mem 0xd2600000-0xd26fffff pref]
pci 0000:1e:00.0: PCI bridge to [bus 20]
pci 0000:1e:01.0: PCI bridge to [bus 1f]
pci 0000:1e:01.0: bridge window [mem 0xd4300000-0xd49fffff]
pci 0000:10:00.0: PCI bridge to [bus 1e-20]
pci 0000:10:00.0: bridge window [mem 0xd4300000-0xd4bfffff]
pci 0000:11:06.0: BAR 6: assigned [mem 0xd2600000-0xd26fffff pref]
pci 0000:10:00.3: PCI bridge to [bus 11]
pci 0000:10:00.3: bridge window [io 0x2000-0x2fff]
pci 0000:10:00.3: bridge window [mem 0xd6400000-0xd66fffff]
pci 0000:10:00.3: bridge window [mem 0xd2600000-0xd26fffff pref]
pci 0000:00:02.0: PCI bridge to [bus 10-20]
pci 0000:00:02.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:02.0: bridge window [mem 0xd4300000-0xd69fffff]
pci 0000:00:02.0: bridge window [mem 0xd2600000-0xd26fffff pref]
pci 0000:00:03.0: PCI bridge to [bus 60]
pci 0000:40:00.0: BAR 6: assigned [mem 0xd2000000-0xd207ffff pref]
pci 0000:00:04.0: PCI bridge to [bus 40]
pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:04.0: bridge window [mem 0xd3000000-0xd42fffff]
pci 0000:00:04.0: bridge window [mem 0xc0000000-0xd21fffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus fe]
pci 0000:00:06.0: PCI bridge to [bus fd]
pci 0000:00:07.0: PCI bridge to [bus fc]
pci 0000:08:00.0: PCI bridge to [bus 09]
pci 0000:00:1c.0: PCI bridge to [bus 08-09]
pci 0000:00:1e.0: PCI bridge to [bus 01]
pci 0000:00:1e.0: bridge window [mem 0xd2200000-0xd24fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0x3fffffffff]
pci_bus 0000:10: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:10: resource 1 [mem 0xd4300000-0xd69fffff]
pci_bus 0000:10: resource 2 [mem 0xd2600000-0xd26fffff pref]
pci_bus 0000:1e: resource 1 [mem 0xd4300000-0xd4bfffff]
pci_bus 0000:1f: resource 1 [mem 0xd4300000-0xd49fffff]
pci_bus 0000:11: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:11: resource 1 [mem 0xd6400000-0xd66fffff]
pci_bus 0000:11: resource 2 [mem 0xd2600000-0xd26fffff pref]
pci_bus 0000:40: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:40: resource 1 [mem 0xd3000000-0xd42fffff]
pci_bus 0000:40: resource 2 [mem 0xc0000000-0xd21fffff 64bit pref]
pci_bus 0000:01: resource 1 [mem 0xd2200000-0xd24fffff]
pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
pci_bus 0000:01: resource 5 [mem 0x00000000-0x3fffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
pci 0000:40:00.0: Video device with shadowed ROM
pci 0000:08:00.0: rerouting interrupts for [8086:032c]
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 26528K (f6216000 - f7bfe000)
microcode: CPU0 sig=0x6fb, pf=0x4, revision=0xb4
microcode: CPU1 sig=0x6fb, pf=0x4, revision=0xb4
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1459942330.844:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 1577
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: irq 88 for MSI/MSI-X
pcieport 0000:1e:00.0: device [8086:3510] has invalid IRQ; check vendor BIOS
pcieport 0000:1e:01.0: device [8086:3514] has invalid IRQ; check vendor BIOS
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 15
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30a0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30a8 irq 15
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata2: port disabled--ignoring
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x30d0 ctl 0x30e8 bmdma 0x30b0 irq 19
ata4: SATA max UDMA/133 cmd 0x30d8 ctl 0x30ec bmdma 0x30b8 irq 19
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 16, io mem 0xd2504000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-67-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-67-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003020
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-67-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-67-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 23, io base 0x00003060
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.13.0-67-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: EISA: Detected 0 cards
cpufreq-nforce2: No nForce2 chipset.
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 1445bfb894ac059fffb51817727fff580b34a7ac'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 12:81:529
rtc_cmos 00:04: setting system clock to 2016-04-06 11:32:12 UTC (1459942332)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
ata4.01: NODEV after polling detection
isapnp: No Plug & Play device found
ata4.00: ATAPI: ATAPI DVD A DH16A1L, KH3B, max UDMA/100
ata3.00: ATA-7: ST3750640NS, 3.AEK, max UDMA/133
ata3.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/100
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST3750640NS 3.AE PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: CD-ROM ATAPI DVD A DH16A1L KH3B PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 sda2
sd 2:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 880K (c19c1000 - c1a9d000)
Write protecting the kernel text: 6564k
Write protecting the kernel read-only data: 2776k
NX-protecting the kernel data: 5724k
systemd-udevd[105]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
wmi: Mapper loaded
tg3.c:v3.134 (Sep 16, 2013)
[drm] Initialized drm 1.1.0 20060810
Fusion MPT SAS Host driver 3.04.20
mptbase: ioc0: Initiating bringup
FDC 0 is a post-1991 82077
tg3 0000:1f:00.0 eth0: Tigon3 [partno(BCM95752) rev 6001] (PCI Express) MAC address 00:1c:c4:ae:72:04
tg3 0000:1f:00.0 eth0: attached PHY is 5752 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:1f:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:1f:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
firewire_ohci 0000:01:05.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
usb 1-6: new high-speed USB device number 5 using ehci-pci
tsc: Refined TSC clocksource calibration: 2659.999 MHz
usb 1-6: New USB device found, idVendor=03f0, idProduct=4117
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: HP LaserJet 1018
usb 1-6: Manufacturer: Hewlett-Packard
usb 1-6: SerialNumber: KP051WJ
usb 1-7: new high-speed USB device number 6 using ehci-pci
firewire_core 0000:01:05.0: created device fw0: GUID 0060b0000024e95b, S400
usb 1-7: New USB device found, idVendor=13fe, idProduct=5500
usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-7: Product:
usb 1-7: Manufacturer:
usb 1-7: SerialNumber: 07015C6F9B273B93
usb-storage 1-7:1.0: USB Mass Storage device detected
scsi4 : usb-storage 1-7:1.0
usbcore: registered new interface driver usb-storage
ioc0: LSISAS1064 A4: Capabilities={Initiator}
usb 2-1: new low-speed USB device number 2 using uhci_hcd
usb 2-1: New USB device found, idVendor=1c4f, idProduct=0002
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB Keykoard
usb 2-1: Manufacturer: USB
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input5
hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1d.0-1/input0
input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input6
hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1d.0-1/input1
usb 2-2: new low-speed USB device number 3 using uhci_hcd
Switched to clocksource tsc
usb 2-2: New USB device found, idVendor=046d, idProduct=c05a
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: USB Optical Mouse
usb 2-2: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input7
hid-generic 0003:046D:C05A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-2/input0
scsi 4:0:0:0: Direct-Access PMAP PQ: 0 ANSI: 6
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdb] 30302208 512-byte logical blocks: (15.5 GB/14.4 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 45 00 00 00
sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 4:0:0:0: [sdb] Attached SCSI removable disk
usb 3-1: new full-speed USB device number 2 using uhci_hcd
usb 3-1: device descriptor read/64, error -71
usb 3-1: New USB device found, idVendor=0922, idProduct=1001
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: DYMO LabelManager PnP
usb 3-1: Manufacturer: Dymo
usb 3-1: SerialNumber: 10242709122014
hid-generic 0003:0922:1001.0004: hiddev0,hidraw3: USB HID v1.11 Device [Dymo DYMO LabelManager PnP] on usb-0000:00:1d.1-1/input0
usb-storage 3-1:1.1: USB Mass Storage device detected
scsi5 : usb-storage 3-1:1.1
scsi 5:0:0:0: Direct-Access DYMO PnP 1.00 PQ: 0 ANSI: 0 CCS
sd 5:0:0:0: Attached scsi generic sg3 type 0
sd 5:0:0:0: [sdc] 8191 512-byte logical blocks: (4.19 MB/3.99 MiB)
sd 5:0:0:0: [sdc] Write Protect is off
sd 5:0:0:0: [sdc] Mode Sense: 03 00 00 80
sd 5:0:0:0: [sdc] No Caching mode page found
sd 5:0:0:0: [sdc] Assuming drive cache: write through
sd 5:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 5:0:0:0: [sdc] No Caching mode page found
sd 5:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 5:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 5:0:0:0: [sdc] No Caching mode page found
sd 5:0:0:0: [sdc] Assuming drive cache: write through
sd 5:0:0:0: [sdc] Attached SCSI removable disk
sd 5:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
random: nonblocking pool is initialized
sd 5:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 5:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 5:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
scsi6 : ioc0: LSISAS1064 A4, FwRev=01100000h, Ports=1, MaxQ=511, IRQ=62
squashfs: version 4.0 (2009/01/31) Phillip Lougher
sd 5:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 5:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 5:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 5:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 5:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 5:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 5:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 5:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 5:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 5:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[981]: starting version 204
lp: driver loaded but no devices found
init: Failed to spawn connman main process: unable to execute: No such file or directory
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
EDAC MC: Ver: 3.0.0
ppdev: user-space parallel port driver
EDAC MC0: Giving out device to module i5000_edac.c controller I5000: DEV 0000:00:10.0 (POLLED)
EDAC PCI0: Giving out device to module i5000_edac controller EDAC PCI controller: DEV 0000:00:10.0 (POLLED)
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
lp0: using parport0 (interrupt-driven).
intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
init: cups main process (1114) killed by HUP signal
init: cups main process ended, respawning
ACPI Warning: 0x0000f828-0x0000f82f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
device-mapper: multipath: version 1.6.0 loaded
snd_hda_intel 0000:00:1b.0: irq 89 for MSI/MSI-X
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
hda_codec: ALC262: SKU not ready 0x411111f0
autoconfig: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:line
speaker_outs=1 (0x16/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Rear Mic=0x18
Front Mic=0x19
Line=0x1a
CD=0x1c
Aux=0x14
realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
realtek: Enable default setup for auto mode as fallback
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
hda_intel: Disabling MSI
hda-intel 0000:40:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:40:00.1: Disabling 64bit DMA
hda-intel 0000:40:00.1: Enable delay in RIRB handling
WARNING! power/level is deprecated; use power/control instead
init: failsafe main process (1337) killed by TERM signal
gpio_ich: ACPI BAR is unavailable, GPI 0 - 15 unavailable
gpio_ich: GPIO from 206 to 255 on gpio_ich
sd 5:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:04.0/0000:40:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:04.0/0000:40:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:04.0/0000:40:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:04.0/0000:40:00.1/sound/card1/input14
input: HP WMI hotkeys as /devices/virtual/input/input13
sd 5:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 5:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory
tg3 0000:1f:00.0: irq 90 for MSI/MSI-X
sd 5:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
zram: module is from the staging directory, the quality is unknown, you have been warned.
zram: Created 2 device(s) ...
usb 3-1: USB disconnect, device number 2
systemd-udevd[1038]: inotify_add_watch(6, /dev/sdc, 10) failed: No such file or directory
Adding 2070852k swap on /dev/zram0. Priority:5 extents:1 across:2070852k SSFS
Adding 2070852k swap on /dev/zram1. Priority:5 extents:1 across:2070852k SSFS
init: alsa-restore main process (1725) terminated with status 99
init: samba-ad-dc main process (1920) terminated with status 1
Non-volatile memory driver v1.3
tg3 0000:1f:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:1f:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: plymouth-upstart-bridge main process ended, respawning
usb 3-1: new full-speed USB device number 3 using uhci_hcd
init: plymouth-upstart-bridge main process (2752) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
usb 3-1: New USB device found, idVendor=0922, idProduct=1002
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: DYMO LabelManager PnP
usb 3-1: Manufacturer: Dymo
usb 3-1: SerialNumber: 10242709122014
usb-storage 3-1:1.1: USB Mass Storage device detected
scsi7 : usb-storage 3-1:1.1
hid-generic 0003:0922:1002.0005: hiddev0,hidraw3: USB HID v1.11 Device [Dymo DYMO LabelManager PnP] on usb-0000:00:1d.1-1/input2
scsi 7:0:0:0: Direct-Access DYMO PnP 1.00 PQ: 0 ANSI: 0 CCS
sd 7:0:0:0: Attached scsi generic sg3 type 0
sd 7:0:0:0: [sdc] 8191 512-byte logical blocks: (4.19 MB/3.99 MiB)
sd 7:0:0:0: [sdc] Write Protect is off
sd 7:0:0:0: [sdc] Mode Sense: 03 00 00 80
sd 7:0:0:0: [sdc] No Caching mode page found
sd 7:0:0:0: [sdc] Assuming drive cache: write through
sd 7:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 7:0:0:0: [sdc] No Caching mode page found
sd 7:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 7:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 7:0:0:0: [sdc] No Caching mode page found
sd 7:0:0:0: [sdc] Assuming drive cache: write through
sd 7:0:0:0: [sdc] Attached SCSI removable disk
usblp 1-6:1.0: usblp1: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x4117
sd 7:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
usblp 3-1:1.0: usblp2: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x0922 pid 0x1002
usbcore: registered new interface driver usblp
sd 7:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 7:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 7:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 7:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 7:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 7:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 7:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
init: plymouth-upstart-bridge main process (19235) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: upstart-udev-bridge main process ended, respawning
systemd-udevd[19370]: starting version 204
init: udev main process ended, respawning
init: dbus main process (19378) terminated with status 1
init: dbus main process ended, respawning
init: Failed to spawn connman main process: unable to execute: No such file or directory
init: bluetooth main process ended, respawning
init: systemd-logind main process (19452) terminated with status 1
init: systemd-logind main process ended, respawning
intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
init: systemd-logind main process (19527) terminated with status 1
init: systemd-logind main process ended, respawning
init: avahi-daemon main process (19539) terminated with status 255
init: avahi-daemon main process ended, respawning
intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
init: rsyslog main process (19554) terminated with status 1
init: rsyslog main process ended, respawning
init: systemd-logind main process (19559) terminated with status 1
init: systemd-logind main process ended, respawning
init: systemd-logind main process (19588) terminated with status 1
init: systemd-logind main process ended, respawning
init: systemd-logind main process (19627) terminated with status 1
init: systemd-logind main process ended, respawning
init: systemd-logind main process (19661) terminated with status 1
init: systemd-logind main process ended, respawning
init: systemd-logind main process (19686) terminated with status 1
init: systemd-logind main process ended, respawning
init: systemd-logind main process (19730) terminated with status 1
init: systemd-logind main process ended, respawning
init: systemd-logind main process (19776) terminated with status 1
init: systemd-logind main process ended, respawning
init: systemd-logind main process (19824) terminated with status 1
init: systemd-logind main process ended, respawning
init: systemd-logind main process (19848) terminated with status 1
init: systemd-logind respawning too fast, stopped
init: smbd main process (19988) terminated with status 1
init: smbd main process ended, respawning
init: smbd main process (20011) terminated with status 1
init: smbd main process ended, respawning
init: smbd main process (20029) terminated with status 1
init: smbd main process ended, respawning
usblp1: removed
usblp 1-6:1.0: usblp1: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x4117
usblp2: removed
usblp 3-1:1.0: usblp2: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x0922 pid 0x1002
init: smbd main process (20043) terminated with status 1
init: smbd main process ended, respawning
init: smbd main process (20060) terminated with status 1
init: smbd main process ended, respawning
init: smbd main process (20084) terminated with status 1
init: smbd main process ended, respawning
init: smbd main process (20095) terminated with status 1
init: smbd main process ended, respawning
init: smbd main process (20102) terminated with status 1
init: smbd main process ended, respawning
init: smbd main process (20108) terminated with status 1
init: smbd main process ended, respawning
init: smbd main process (20117) terminated with status 1
init: smbd main process ended, respawning
init: upstart-file-bridge main process ended, respawning
init: smbd main process (20135) terminated with status 1
init: smbd respawning too fast, stopped
init: upstart-socket-bridge main process ended, respawning
usblp1: removed
usblp 1-6:1.0: usblp1: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x4117
usblp2: removed
usblp 3-1:1.0: usblp2: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x0922 pid 0x1002
init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory
usblp1: removed
init: acpid main process ended, respawning
init: alsa-restore main process (20493) terminated with status 99
init: cron main process (20359) terminated with status 1
init: cron main process ended, respawning
init: atd main process ended, respawning
zram: Cannot change disksize for initialized device
init: zram-config pre-start process (20364) terminated with status 1
init: lightdm main process (20598) terminated with status 1
init: plymouth-ready (startup) main process (19234) terminated with status 1
sd 7:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 7:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 7:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 7:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 7:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 7:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 7:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 7:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 7:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 7:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 7:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 7:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 7:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 7:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 7:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 7:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 7:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 7:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 7:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 7:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 7:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 7:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
init: cups-browsed main process (19680) killed by KILL signal
init: cups main process (19602) killed by KILL signal
init: upstart-udev-bridge main process ended, respawning
systemd-udevd[12580]: starting version 204
init: udev main process ended, respawning
init: systemd-logind main process (12672) terminated with status 1
init: systemd-logind main process ended, respawning
init: systemd-logind main process (12688) terminated with status 1
init: systemd-logind main process ended, respawning
init: systemd-logind main process (12701) terminated with status 1
init: systemd-logind main process ended, respawning
init: systemd-logind main process (12713) terminated with status 1
init: systemd-logind main process ended, respawning
init: systemd-logind main process (12725) terminated with status 1
init: systemd-logind main process ended, respawning
init: systemd-logind main process (12754) terminated with status 1
init: systemd-logind main process ended, respawning
init: systemd-logind main process (12762) terminated with status 1
init: systemd-logind main process ended, respawning
init: systemd-logind main process (12772) terminated with status 1
init: systemd-logind main process ended, respawning
init: systemd-logind main process (12779) terminated with status 1
init: systemd-logind main process ended, respawning
init: systemd-logind main process (12786) terminated with status 1
init: systemd-logind main process ended, respawning
init: systemd-logind main process (12794) terminated with status 1
init: systemd-logind respawning too fast, stopped
init: modemmanager main process ended, respawning
init: modemmanager main process ended, respawning
init: modemmanager main process ended, respawning
init: modemmanager main process ended, respawning
init: modemmanager main process ended, respawning
init: modemmanager main process ended, respawning
init: modemmanager main process ended, respawning
init: modemmanager main process ended, respawning
init: modemmanager main process ended, respawning
init: modemmanager main process ended, respawning
init: smbd main process (13846) terminated with status 1
init: smbd main process ended, respawning
init: modemmanager respawning too fast, stopped
init: smbd main process (13858) terminated with status 1
init: smbd main process ended, respawning
init: smbd main process (13869) terminated with status 1
init: smbd main process ended, respawning
init: smbd main process (13887) terminated with status 1
init: smbd main process ended, respawning
init: smbd main process (13898) terminated with status 1
init: smbd main process ended, respawning
init: smbd main process (13904) terminated with status 1
init: smbd main process ended, respawning
init: smbd main process (13912) terminated with status 1
init: smbd main process ended, respawning
init: nmbd main process ended, respawning
init: smbd main process (13918) terminated with status 1
init: smbd main process ended, respawning
init: smbd main process (13928) terminated with status 1
init: smbd main process ended, respawning
init: smbd main process (13949) terminated with status 1
init: smbd main process ended, respawning
init: smbd main process (13957) terminated with status 1
init: smbd respawning too fast, stopped
sd 7:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
sd 7:0:0:0: ioctl_internal_command return code = 8070000
: Sense Key : Hardware Error [current]
: Add. Sense: No additional sense information
hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
usb 2-1: USB disconnect, device number 2
usb 2-1: new low-speed USB device number 4 using uhci_hcd
usb 2-1: New USB device found, idVendor=1c4f, idProduct=0002
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB Keykoard
usb 2-1: Manufacturer: USB
input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input18
hid-generic 0003:1C4F:0002.0006: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1d.0-1/input0
input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input19
hid-generic 0003:1C4F:0002.0007: input,hidraw1: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1d.0-1/input1