dmesg - test
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-101-generic (buildd@lgw01-35) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #141-Ubuntu SMP Thu Mar 10 21:43:24 UTC 2016 (Ubuntu 3.2.0-101.141-generic 3.2.76)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000092000 (usable)
BIOS-e820: 0000000000092000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dd232000 (usable)
BIOS-e820: 00000000dd232000 - 00000000dd243000 (ACPI data)
BIOS-e820: 00000000dd243000 - 00000000dda25000 (usable)
BIOS-e820: 00000000dda25000 - 00000000ddac6000 (reserved)
BIOS-e820: 00000000ddac6000 - 00000000ddad2000 (ACPI data)
BIOS-e820: 00000000ddad2000 - 00000000ddb5d000 (usable)
BIOS-e820: 00000000ddb5d000 - 00000000ddc13000 (ACPI NVS)
BIOS-e820: 00000000ddc13000 - 00000000ddfb6000 (reserved)
BIOS-e820: 00000000ddfb6000 - 00000000ddfb7000 (usable)
BIOS-e820: 00000000ddfb7000 - 00000000ddffa000 (ACPI NVS)
BIOS-e820: 00000000ddffa000 - 00000000dee13000 (usable)
BIOS-e820: 00000000dee13000 - 00000000deff2000 (reserved)
BIOS-e820: 00000000deff2000 - 00000000df000000 (usable)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed45000 (reserved)
BIOS-e820: 00000000fed90000 - 00000000fed94000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000041e000000 (usable)
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Hewlett-Packard HP Z220 CMT Workstation/1790, BIOS K51 v01.58 02/07/2013
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x41e000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DBFFF write-protect
DC000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask C00000000 write-back
1 base 400000000 mask FF0000000 write-back
2 base 410000000 mask FF8000000 write-back
3 base 418000000 mask FFC000000 write-back
4 base 41C000000 mask FFE000000 write-back
5 base 0E0000000 mask FE0000000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 16GB, range: 256MB, type WB
reg 2, base: 16640MB, range: 128MB, type WB
reg 3, base: 16768MB, range: 64MB, type WB
reg 4, base: 16832MB, range: 32MB, type WB
reg 5, base: 3584MB, range: 512MB, type UC
total RAM covered: 16352M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 512MB, type WB
reg 6, base: 16864MB, range: 32MB, type UC
e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xdf000 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000f4e90] f4e90
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff88000008d000] 8d000 size 20480
init_memory_mapping: 0000000000000000-00000000df000000
0000000000 - 00df000000 page 2M
kernel direct mapping tables up to df000000 @ 1fffb000-20000000
init_memory_mapping: 0000000100000000-000000041e000000
0100000000 - 041e000000 page 2M
kernel direct mapping tables up to 41e000000 @ deff2000-df000000
RAMDISK: 3573e000 - 36b97000
ACPI: RSDP 0x00000000000F9810 00024 (v02 HPQOEM)
ACPI: XSDT 0x00000000DD232088 0008C (v01 HPQOEM SLIC-WKS 01072009 AMI 00010013)
ACPI: FACP 0x00000000DD23B380 0010C (v05 HPQOEM SLIC-WKS 01072009 AMI 00010013)
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20110623/tbfadt-288)
ACPI: DSDT 0x00000000DD2321A0 091DC (v02 HPQOEM SLIC-WKS 00000051 INTL 20051117)
ACPI: FACS 0x00000000DDC11080 00040
ACPI: APIC 0x00000000DD23B490 00092 (v03 HPQOEM SLIC-WKS 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DD23B528 00044 (v01 HPQOEM SLIC-WKS 01072009 AMI 00010013)
ACPI: MCFG 0x00000000DD23B570 0003C (v01 HPQOEM SLIC-WKS 01072009 MSFT 00000097)
ACPI: HPET 0x00000000DD23B5B0 00038 (v01 HPQOEM SLIC-WKS 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000DD23B5E8 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 0x00000000DD23B958 052A9 (v01 COMPAQ WMI 00000001 MSFT 03000001)
ACPI: SLIC 0x00000000DD240C08 00176 (v01 HPQOEM SLIC-WKS 00000001 00000000)
ACPI: SSDT 0x00000000DD240D80 009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000DD241730 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: TCPA 0x00000000DD2421C8 00032 (v02 APTIO4 NAPAASF 00000001 MSFT 01000013)
ACPI: DMAR 0x00000000DD242200 00080 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: ASF! 0x00000000DD242280 000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000041e000000
Initmem setup node 0 0000000000000000-000000041e000000
NODE_DATA [000000041dffb000 - 000000041dffffff]
[ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040d600000-ffff88041d5fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0041e000
Movable zone start PFN for each node
early_node_map[8] active PFN ranges
0: 0x00000010 -> 0x00000092
0: 0x00000100 -> 0x000dd232
0: 0x000dd243 -> 0x000dda25
0: 0x000ddad2 -> 0x000ddb5d
0: 0x000ddfb6 -> 0x000ddfb7
0: 0x000ddffa -> 0x000dee13
0: 0x000deff2 -> 0x000df000
0: 0x00100000 -> 0x0041e000
On node 0 totalpages: 4180041
DMA zone: 64 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3901 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 891143 pages, LIFO batch:31
Normal zone: 51072 pages used for memmap
Normal zone: 3217536 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 0000000000092000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000dd232000 - 00000000dd243000
PM: Registered nosave memory: 00000000dda25000 - 00000000ddac6000
PM: Registered nosave memory: 00000000ddac6000 - 00000000ddad2000
PM: Registered nosave memory: 00000000ddb5d000 - 00000000ddc13000
PM: Registered nosave memory: 00000000ddc13000 - 00000000ddfb6000
PM: Registered nosave memory: 00000000ddfb7000 - 00000000ddffa000
PM: Registered nosave memory: 00000000dee13000 - 00000000deff2000
PM: Registered nosave memory: 00000000df000000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed45000
PM: Registered nosave memory: 00000000fed45000 - 00000000fed90000
PM: Registered nosave memory: 00000000fed90000 - 00000000fed94000
PM: Registered nosave memory: 00000000fed94000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at df000000 (gap: df000000:19000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88041dc00000 s79104 r8192 d23296 u262144
pcpu-alloc: s79104 r8192 d23296 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4112580
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16354360k/17268736k available (6621k kernel code, 548572k absent, 365804k reserved, 6587k data, 932k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:744 16
Extended CMOS year: 2000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3392.227 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.45 BogoMIPS (lpj=13568908)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20110623
ftrace: allocating 26702 entries in 105 pages
DMAR: Host address width 36
DMAR: DRHD base: 0x000000fed90000 flags: 0x1
IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f010da
DMAR: RMRR base: 0x000000dda2f000 end: 0x000000dda59fff
IOAPIC id 0 under DRHD base 0xfed90000 IOMMU 0
HPET id 0 under DRHD base 0xfed90000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz stepping 09
Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 8d000
NMI watchdog enabled, takes one hw-pmu counter.
#2
smpboot cpu 2: start_ip = 8d000
NMI watchdog enabled, takes one hw-pmu counter.
#3
smpboot cpu 3: start_ip = 8d000
NMI watchdog enabled, takes one hw-pmu counter.
#4
smpboot cpu 4: start_ip = 8d000
NMI watchdog enabled, takes one hw-pmu counter.
#5
smpboot cpu 5: start_ip = 8d000
NMI watchdog enabled, takes one hw-pmu counter.
#6
smpboot cpu 6: start_ip = 8d000
NMI watchdog enabled, takes one hw-pmu counter.
#7 Ok.
smpboot cpu 7: start_ip = 8d000
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 8 CPUs
Total of 8 processors activated (54274.36 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region at ddb5d000 (745472 bytes)
PM: Registering ACPI NVS region at ddfb7000 (274432 bytes)
print_constraints: dummy:
RTC time: 2:44:30, date: 03/31/16
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 0x00000000DDA73018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x0000000000000000 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 0x00000000DDA74A98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x0000000000000000 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 0x00000000DDA75C18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x0000000000000000 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfeafffff]
pci 0000:00:00.0: [8086:0150] type 0 class 0x000600
pci 0000:00:01.0: [8086:0151] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:14.0: [8086:1e31] type 0 class 0x000c03
pci 0000:00:14.0: reg 10: [mem 0xf7120000-0xf712ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: PME# disabled
pci 0000:00:16.0: [8086:1e3a] type 0 class 0x000780
pci 0000:00:16.0: reg 10: [mem 0xf713c000-0xf713c00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:16.3: [8086:1e3d] type 0 class 0x000700
pci 0000:00:16.3: reg 10: [io 0xf0a0-0xf0a7]
pci 0000:00:16.3: reg 14: [mem 0xf713a000-0xf713afff]
pci 0000:00:19.0: [8086:1502] type 0 class 0x000200
pci 0000:00:19.0: reg 10: [mem 0xf7100000-0xf711ffff]
pci 0000:00:19.0: reg 14: [mem 0xf7139000-0xf7139fff]
pci 0000:00:19.0: reg 18: [io 0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: [8086:1e2d] type 0 class 0x000c03
pci 0000:00:1a.0: reg 10: [mem 0xf7138000-0xf71383ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: [8086:1e20] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xf7130000-0xf7133fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1d.0: [8086:1e26] type 0 class 0x000c03
pci 0000:00:1d.0: reg 10: [mem 0xf7137000-0xf71373ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:1e53] type 0 class 0x000601
pci 0000:00:1f.2: [8086:2822] type 0 class 0x000104
pci 0000:00:1f.2: reg 10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 24: [mem 0xf7136000-0xf71367ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:1e22] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xf7135000-0xf71350ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [10de:0ffa] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:01:00.1: [10de:0e1b] type 0 class 0x000403
pci 0000:01:00.1: reg 10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x18) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
i2c-core: driver [aat2870] using legacy suspend method
i2c-core: driver [aat2870] using legacy resume method
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 0000000000092000 - 000000000009ffff
reserve RAM buffer: 00000000dd232000 - 00000000dfffffff
reserve RAM buffer: 00000000dda25000 - 00000000dfffffff
reserve RAM buffer: 00000000ddb5d000 - 00000000dfffffff
reserve RAM buffer: 00000000ddfb7000 - 00000000dfffffff
reserve RAM buffer: 00000000dee13000 - 00000000dfffffff
reserve RAM buffer: 00000000df000000 - 00000000dfffffff
reserve RAM buffer: 000000041e000000 - 000000041fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-3e]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0xe0000000-0xfeafffff window]
pnp 00:00: [mem 0x00010000-0x0001ffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfed40000-0xfed44fff]
system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [io 0x0000-0x001f]
pnp 00:02: [io 0x0081-0x0091]
pnp 00:02: [io 0x0093-0x009f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [mem 0xff000000-0xffffffff]
pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:04: [mem 0xfed00000-0xfed003ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io 0x002e-0x002f]
pnp 00:05: [io 0x004e-0x004f]
pnp 00:05: [io 0x0061]
pnp 00:05: [io 0x0063]
pnp 00:05: [io 0x0065]
pnp 00:05: [io 0x0067]
pnp 00:05: [io 0x0070]
pnp 00:05: [io 0x0080]
pnp 00:05: [io 0x0092]
pnp 00:05: [io 0x00b2-0x00b3]
pnp 00:05: [io 0x0680-0x069f]
pnp 00:05: [io 0x0200-0x020f]
pnp 00:05: [io 0xffff]
pnp 00:05: [io 0xffff]
pnp 00:05: [io 0x0400-0x0453]
pnp 00:05: [io 0x0458-0x047f]
pnp 00:05: [io 0x0500-0x057f]
pnp 00:05: [io 0x164e-0x164f]
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0x0200-0x020f] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0x0400-0x0453] could not be reserved
system 00:05: [io 0x0458-0x047f] has been reserved
system 00:05: [io 0x0500-0x057f] has been reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [io 0x0070-0x0077]
pnp 00:06: [irq 8]
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: [io 0x0454-0x0457]
system 00:07: [io 0x0454-0x0457] has been reserved
system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:08: [io 0x0a20-0x0a3f]
pnp 00:08: [io 0x0800-0x07ff disabled]
pnp 00:08: [io 0x0a10-0x0a1f]
system 00:08: [io 0x0a20-0x0a3f] has been reserved
system 00:08: [io 0x0a10-0x0a1f] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io 0x0060]
pnp 00:09: [io 0x0064]
pnp 00:09: [irq 1]
pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0a: [io 0x0060]
pnp 00:0a: [io 0x0064]
pnp 00:0a: [irq 12]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:0b: [io 0x0010-0x001f]
pnp 00:0b: [io 0x0022-0x003f]
pnp 00:0b: [io 0x0044-0x005f]
pnp 00:0b: [io 0x0062-0x0063]
pnp 00:0b: [io 0x0065-0x006f]
pnp 00:0b: [io 0x0072-0x007f]
pnp 00:0b: [io 0x0080]
pnp 00:0b: [io 0x0084-0x0086]
pnp 00:0b: [io 0x0088]
pnp 00:0b: [io 0x008c-0x008e]
pnp 00:0b: [io 0x0090-0x009f]
pnp 00:0b: [io 0x00a2-0x00bf]
pnp 00:0b: [io 0x00e0-0x00ef]
pnp 00:0b: [io 0x04d0-0x04d1]
system 00:0b: [io 0x04d0-0x04d1] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [io 0x00f0-0x00ff]
pnp 00:0c: [irq 13]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:0d: [mem 0xfed1c000-0xfed1ffff]
pnp 00:0d: [mem 0xfed10000-0xfed17fff]
pnp 00:0d: [mem 0xfed18000-0xfed18fff]
pnp 00:0d: [mem 0xfed19000-0xfed19fff]
pnp 00:0d: [mem 0xf8000000-0xfbffffff]
pnp 00:0d: [mem 0xfed20000-0xfed3ffff]
pnp 00:0d: [mem 0xfed90000-0xfed93fff]
pnp 00:0d: [mem 0xfed45000-0xfed8ffff]
pnp 00:0d: [mem 0xff000000-0xffffffff]
pnp 00:0d: [mem 0xfee00000-0xfeefffff]
pnp 00:0d: [mem 0xf2000000-0xf2000fff]
system 00:0d: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0d: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0d: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0d: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0d: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0d: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0d: [mem 0xff000000-0xffffffff] has been reserved
system 00:0d: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0d: [mem 0xf2000000-0xf2000fff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0e: [mem 0xfed40000-0xfed44fff]
system 00:0e: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 02-02]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 9 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:02: resource 7 [mem 0x000dc000-0x000dffff]
pci_bus 0000:02: resource 8 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:02: resource 9 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:02: resource 10 [mem 0xe0000000-0xfeafffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:14.0: PCI INT A disabled
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: PCI INT A disabled
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800d9232000 - ffff8800dd232000
software IO TLB at phys 0xd9232000 - 0xdd232000
audit: initializing netlink socket (disabled)
type=2000 audit(1459392269.892:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 31942
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
Freeing initrd memory: 20836k freed
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
ERST: Table is not found!
GHES: HEST is not enabled!
serial 0000:00:16.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
0000:00:16.3: ttyS4 at I/O 0xf0a0 (irq = 19) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7136000 port 0xf7136100 irq 42
ata2: SATA max UDMA/133 abar m2048@0xf7136000 port 0xf7136180 irq 42
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7138000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7137000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 8:205:714
rtc_cmos 00:06: setting system clock to 2016-03-31 02:44:30 UTC (1459392270)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata2.00: ATA-8: ST4000DM000-1F2168, CC52, max UDMA/133
ata2.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ATA-8: ST500DM002-1BD142, HP73, max UDMA/100
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA ST500DM002-1BD14 HP73 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access ATA ST4000DM000-1F21 CC52 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-1: new high-speed USB device number 2 using ehci_hcd
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 932k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1552k freed
Freeing unused kernel memory: 1172k freed
udevd[125]: starting version 175
e1000e: Intel(R) PRO/1000 Network Driver - 2.5.4-NAPI
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci_hcd
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 88:51:fb:5f:51:c4
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 0100FF-0FF
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
Refined TSC clocksource calibration: 3392.293 MHz.
Switching to clocksource tsc
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xf1000000, mapped to 0xffffc90006680000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
Btrfs loaded
xor: automatically using best checksumming function: generic_sse
generic_sse: 17133.000 MB/sec
xor: using function: generic_sse (17133.000 MB/sec)
device-mapper: dm-raid45: initialized v0.2594b
EXT4-fs (sda2): INFO: recovery required on readonly filesystem
EXT4-fs (sda2): write access will be enabled during recovery
EXT4-fs (sda2): orphan cleanup on readonly fs
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 260738
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 335920
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 335928
EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 335929
EXT4-fs (sda2): 4 orphan inodes deleted
EXT4-fs (sda2): recovery complete
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
init: ureadahead main process (379) terminated with status 5
Adding 3998716k swap on /dev/sda5. Priority:-1 extents:1 across:3998716k
ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[432]: starting version 175
lp: driver loaded but no devices found
wmi: Mapper loaded
mei: module is from the staging directory, the quality is unknown, you have been warned.
mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 45 for MSI/MSI-X
device-mapper: multipath: version 1.3.2 loaded
type=1400 audit(1459392279.878:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=646 comm="apparmor_parser"
type=1400 audit(1459392279.878:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=646 comm="apparmor_parser"
type=1400 audit(1459392279.878:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=646 comm="apparmor_parser"
type=1400 audit(1459392280.034:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=662 comm="apparmor_parser"
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.88 Wed Mar 27 14:26:46 PDT 2013
input: HP WMI hotkeys as /devices/virtual/input/input2
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Line-Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
hda_intel: Disabling MSI
snd_hda_intel 0000:01:00.1: setting latency timer to 64
HDMI status: Codec=0 Pin=4 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
Adding 9999996k swap on /local/mnt/swapfile. Priority:-2 extents:158 across:26820608k
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
type=1400 audit(1459392288.366:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1037 comm="apparmor_parser"
type=1400 audit(1459392288.366:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1037 comm="apparmor_parser"
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
init: cups main process (1040) terminated with status 1
init: cups main process ended, respawning
init: failsafe main process (959) killed by TERM signal
type=1400 audit(1459392291.254:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1228 comm="apparmor_parser"
type=1400 audit(1459392291.254:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1228 comm="apparmor_parser"
type=1400 audit(1459392291.254:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1228 comm="apparmor_parser"
type=1400 audit(1459392291.258:11): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=1234 comm="apparmor_parser"
type=1400 audit(1459392291.258:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1232 comm="apparmor_parser"
type=1400 audit(1459392291.258:13): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1232 comm="apparmor_parser"
type=1400 audit(1459392291.282:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1227 comm="apparmor_parser"
type=1400 audit(1459392291.294:15): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=1233 comm="apparmor_parser"
init: cups main process (1267) terminated with status 1
init: cups main process ended, respawning
init: gdm main process (1381) killed by TERM signal
init: ubiquity main process (1352) killed by TERM signal
init: whoopsie main process (1469) terminated with status 1
init: whoopsie main process ended, respawning
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
audit_printk_skb: 42 callbacks suppressed
type=1400 audit(1459392294.482:30): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1580 comm="apparmor_parser"
type=1400 audit(1459392294.482:31): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1580 comm="apparmor_parser"
init: cups main process (1581) terminated with status 1
init: cups main process ended, respawning
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
init: lightdm main process (1476) terminated with status 1
type=1400 audit(1459392297.510:32): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1751 comm="apparmor_parser"
type=1400 audit(1459392297.510:33): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1751 comm="apparmor_parser"
type=1400 audit(1459392297.522:34): apparmor="DENIED" operation="open" parent=1 profile="/usr/sbin/cupsd" name="/etc/opt/quest/vas/vasipc_timeout" pid=1752 comm="cupsd" requested_mask="r" denied_mask="r" fsuid=0 ouid=2
type=1400 audit(1459392297.522:35): apparmor="DENIED" operation="open" parent=1 profile="/usr/sbin/cupsd" name="/etc/opt/quest/vas/vasipc_timeout" pid=1752 comm="cupsd" requested_mask="r" denied_mask="r" fsuid=0 ouid=2
type=1400 audit(1459392298.992:36): apparmor="DENIED" operation="open" parent=1 profile="/usr/sbin/ntpd" name="/opt/quest/lib64/nss/libnss_vas4.so.2" pid=1790 comm="ntpd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
type=1400 audit(1459392298.992:37): apparmor="DENIED" operation="open" parent=1 profile="/usr/sbin/ntpd" name="/opt/quest/lib64/nss/libnss_vas4.so.2" pid=1790 comm="ntpd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
init: cups main process (1752) terminated with status 1
init: cups respawning too fast, stopped
init: failsafe-x main process (1720) terminated with status 1
init: cron main process (1467) killed by TERM signal
init: plymouth-stop pre-start process (3125) terminated with status 1