dmesg - server1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.5-1.el7.elrepo.x86_64 (mockbuild@Build64R7) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-4) (GCC) ) #1 SMP Thu Mar 10 11:45:51 EST 2016
Command line: BOOT_IMAGE=/vmlinuz-4.4.5-1.el7.elrepo.x86_64 root=/dev/mapper/centos-root ro rd.lvm.lv=centos/root rd.lvm.lv=centos/swap crashkernel=auto
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000d762efff] usable
BIOS-e820: [mem 0x00000000d762f000-0x00000000d763bfff] ACPI data
BIOS-e820: [mem 0x00000000d763c000-0x00000000d763cfff] usable
BIOS-e820: [mem 0x00000000d763d000-0x00000000d7ffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fee0ffff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000001027ffefff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: HP ProLiant DL380 G6, BIOS P62 03/30/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x1027fff max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00D8000000 mask FFF8000000 uncachable
1 base 00E0000000 mask FFE0000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0xd763d max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f4f80-0x000f4f8f] mapped at [ffff8800000f4f80]
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
BRK [0x02010000, 0x02010fff] PGTABLE
BRK [0x02011000, 0x02011fff] PGTABLE
BRK [0x02012000, 0x02012fff] PGTABLE
BRK [0x02013000, 0x02013fff] PGTABLE
BRK [0x02014000, 0x02014fff] PGTABLE
RAMDISK: [mem 0x352c9000-0x3695cfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F4F00 000024 (v02 HP )
ACPI: XSDT 0x00000000D7630040 0000BC (v01 HP ProLiant 00000002 \xffffffd2? 0000162E)
ACPI: FACP 0x00000000D7630140 0000F4 (v03 HP ProLiant 00000002 \xffffffd2? 0000162E)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20150930/tbfadt-704)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20150930/tbfadt-704)
ACPI: DSDT 0x00000000D7630240 002005 (v01 HP DSDT 00000001 INTL 20030228)
ACPI: FACS 0x00000000D762F100 000040
ACPI: FACS 0x00000000D762F100 000040
ACPI: SPCR 0x00000000D762F140 000050 (v01 HP SPCRRBSU 00000001 \xffffffd2? 0000162E)
ACPI: MCFG 0x00000000D762F1C0 00003C (v01 HP ProLiant 00000001 00000000)
ACPI: HPET 0x00000000D762F200 000038 (v01 HP ProLiant 00000002 \xffffffd2? 0000162E)
ACPI: FFFF 0x00000000D762F240 000064 (v02 HP ProLiant 00000002 \xffffffd2? 0000162E)
ACPI: SPMI 0x00000000D762F2C0 000040 (v05 HP ProLiant 00000001 \xffffffd2? 0000162E)
ACPI: ERST 0x00000000D762F300 0001D0 (v01 HP ProLiant 00000001 \xffffffd2? 0000162E)
ACPI: APIC 0x00000000D762F500 00015E (v01 HP ProLiant 00000002 00000000)
ACPI: FFFF 0x00000000D762F680 000570 (v01 HP Proliant 00000001 \xffffffd2? 0000162E)
ACPI: FFFF 0x00000000D762FC00 000176 (v01 HP ProLiant 00000001 \xffffffd2? 0000162E)
ACPI: BERT 0x00000000D762FD80 000030 (v01 HP ProLiant 00000001 \xffffffd2? 0000162E)
ACPI: HEST 0x00000000D762FDC0 0000BC (v01 HP ProLiant 00000001 \xffffffd2? 0000162E)
ACPI: DMAR 0x00000000D762FE80 000134 (v01 HP ProLiant 00000001 \xffffffd2? 0000162E)
ACPI: SSDT 0x00000000D7632280 000125 (v03 HP CRSPCI0 00000002 HP 00000001)
ACPI: SSDT 0x00000000D76323C0 000255 (v03 HP riser1a 00000002 INTL 20061109)
ACPI: SSDT 0x00000000D7632640 00025D (v03 HP riser2a 00000002 INTL 20061109)
ACPI: SSDT 0x00000000D76328C0 0003BB (v01 HP pcc 00000001 INTL 20090625)
ACPI: SSDT 0x00000000D7632C80 000377 (v01 HP pmab 00000001 INTL 20090625)
ACPI: SSDT 0x00000000D7633000 003444 (v01 INTEL PPM RCM 00000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000001027ffefff]
NODE_DATA(0) allocated [mem 0x1027fdd000-0x1027ffefff]
kexec_core: crashkernel: memory value expected
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x0000001027ffefff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000d762efff]
node 0: [mem 0x00000000d763c000-0x00000000d763cfff]
node 0: [mem 0x0000000100000000-0x0000001027ffefff]
Initmem setup node 0 [mem 0x0000000000001000-0x0000001027ffefff]
On node 0 totalpages: 16774605
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 13721 pages used for memmap
DMA32 zone: 878128 pages, LIFO batch:31
Normal zone: 248320 pages used for memmap
Normal zone: 15892479 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 0, version 32, address 0xfec80000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 32 CPUs, 8 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xd762f000-0xd763bfff]
PM: Registered nosave memory: [mem 0xd763d000-0xd7ffffff]
PM: Registered nosave memory: [mem 0xd8000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
PM: Registered nosave memory: [mem 0xe4000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfee0ffff]
PM: Registered nosave memory: [mem 0xfee10000-0xff7fffff]
PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
e820: [mem 0xe4000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
PERCPU: Embedded 34 pages/cpu @ffff881027400000 s98584 r8192 d32488 u262144
pcpu-alloc: s98584 r8192 d32488 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
Built 1 zonelists in Node order, mobility grouping on. Total pages: 16512479
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-4.4.5-1.el7.elrepo.x86_64 root=/dev/mapper/centos-root ro rd.lvm.lv=centos/root rd.lvm.lv=centos/swap crashkernel=auto
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 65939344K/67098420K available (7099K kernel code, 1434K rwdata, 3420K rodata, 1768K init, 2676K bss, 1159076K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=32
NR_IRQS:524544 nr_irqs:1088 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-31.
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2665.957 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5331.91 BogoMIPS (lpj=2665957)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 7 ACPI AML tables successfully acquired and loaded
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 24K (ffffffff81d6b000 - ffffffff81d71000)
ftrace: allocating 28265 entries in 111 pages
DMAR-IR: This system BIOS has enabled interrupt remapping
on a chipset that contains an erratum making that
feature unstable. To maintain system stability
interrupt remapping is being disabled. Please
contact your BIOS vendor for an update
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz (family: 0x6, model: 0x2c, stepping: 0x2)
Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Broken BIOS detected, complain to your hardware vendor.
[Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330)
Intel PMU driver.
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 #22 #23
x86: Booted up 1 node, 24 CPUs
smpboot: Total of 24 processors activated (127958.40 BogoMIPS)
devtmpfs: initialized
memory block size : 128MB
evm: security.selinux
evm: security.ima
evm: security.capability
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
PCI: HP ProLiant DL380 detected, enabling pci=bfsort.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI Error: Field [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits) (20150930/dsopcode-236)
ACPI Error: Method parse/execution failed [\_SB._OSC] (Node ffff880fe709ef28), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150930/hwxface-580)
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-19])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A08:00: host bridge window expanded to [mem 0xfed00000-0xfed44fff window]; [mem 0xfed00000-0xfed44fff window] ignored
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0xe7000000-0xfbffffff window]
pci_bus 0000:00: root bus resource [io 0x1000-0x5fff window]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff window]
pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed44fff window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb window]
pci_bus 0000:00: root bus resource [io 0x03c0-0x03df window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [bus 00-19]
pci 0000:00:00.0: [8086:3406] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [8086:340b] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:340c] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: [8086:340d] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [8086:340f] type 01 class 0x060400
pci 0000:00:08.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: [8086:3410] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: [8086:3411] type 01 class 0x060400
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0d.0: [8086:343a] type 00 class 0x060000
pci 0000:00:0d.1: [8086:343b] type 00 class 0x060000
pci 0000:00:0d.2: [8086:343c] type 00 class 0x060000
pci 0000:00:0d.3: [8086:343d] type 00 class 0x060000
pci 0000:00:0d.4: [8086:3418] type 00 class 0x060000
pci 0000:00:0d.5: [8086:3419] type 00 class 0x060000
pci 0000:00:0d.6: [8086:341a] type 00 class 0x060000
pci 0000:00:0e.0: [8086:341c] type 00 class 0x060000
pci 0000:00:0e.1: [8086:341d] type 00 class 0x060000
pci 0000:00:0e.2: [8086:341e] type 00 class 0x060000
pci 0000:00:0e.3: [8086:341f] type 00 class 0x060000
pci 0000:00:0e.4: [8086:3439] type 00 class 0x060000
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:3a44] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x1000-0x101f]
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x1020-0x103f]
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x1040-0x105f]
pci 0000:00:1d.3: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0x1060-0x107f]
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xf1df0000-0xf1df03ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3a18] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0x1080-0x1087]
pci 0000:00:1f.2: reg 0x14: [io 0x1088-0x108b]
pci 0000:00:1f.2: reg 0x18: [io 0x1090-0x1097]
pci 0000:00:1f.2: reg 0x1c: [io 0x1098-0x109b]
pci 0000:00:1f.2: reg 0x20: [io 0x10a0-0x10af]
pci 0000:00:1f.2: reg 0x24: [io 0x10b0-0x10bf]
pci 0000:04:00.0: [103c:323a] type 00 class 0x010400
pci 0000:04:00.0: reg 0x10: [mem 0xfb400000-0xfb7fffff 64bit]
pci 0000:04:00.0: reg 0x18: [mem 0xfb3f0000-0xfb3f0fff 64bit]
pci 0000:04:00.0: reg 0x20: [io 0x4000-0x40ff]
pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:04:00.0: supports D1
pci 0000:04:00.0: PME# supported from D0
pci 0000:00:01.0: PCI bridge to [bus 04]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xfb300000-0xfb7fffff]
pci 0000:00:02.0: PCI bridge to [bus 05]
pci 0000:00:03.0: PCI bridge to [bus 10-12]
pci 0000:00:04.0: PCI bridge to [bus 13]
pci 0000:00:05.0: PCI bridge to [bus 14-16]
pci 0000:00:06.0: PCI bridge to [bus 17-19]
pci 0000:00:07.0: PCI bridge to [bus 0d-0f]
pci 0000:0a:00.0: [103c:323a] type 00 class 0x010400
pci 0000:0a:00.0: reg 0x10: [mem 0xfbc00000-0xfbffffff 64bit]
pci 0000:0a:00.0: reg 0x18: [mem 0xfbbf0000-0xfbbf0fff 64bit]
pci 0000:0a:00.0: reg 0x20: [io 0x5000-0x50ff]
pci 0000:0a:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:0a:00.0: supports D1
pci 0000:0a:00.0: PME# supported from D0
pci 0000:00:08.0: PCI bridge to [bus 0a-0c]
pci 0000:00:08.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:08.0: bridge window [mem 0xfbb00000-0xfbffffff]
pci 0000:00:09.0: PCI bridge to [bus 07-09]
pci 0000:00:0a.0: PCI bridge to [bus 06]
pci 0000:02:00.0: [14e4:1639] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xf4000000-0xf5ffffff 64bit]
pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.1: [14e4:1639] type 00 class 0x020000
pci 0000:02:00.1: reg 0x10: [mem 0xf2000000-0xf3ffffff 64bit]
pci 0000:02:00.1: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xf2000000-0xf5ffffff]
pci 0000:03:00.0: [14e4:1639] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.1: [14e4:1639] type 00 class 0x020000
pci 0000:03:00.1: reg 0x10: [mem 0xf6000000-0xf7ffffff 64bit]
pci 0000:03:00.1: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [mem 0xf6000000-0xf9ffffff]
pci 0000:01:03.0: [1002:515e] type 00 class 0x030000
pci 0000:01:03.0: reg 0x10: [mem 0xe8000000-0xefffffff pref]
pci 0000:01:03.0: reg 0x14: [io 0x3000-0x30ff]
pci 0000:01:03.0: reg 0x18: [mem 0xf1ff0000-0xf1ffffff]
pci 0000:01:03.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:03.0: supports D1 D2
pci 0000:01:04.0: [0e11:b203] type 00 class 0x088000
pci 0000:01:04.0: reg 0x10: [io 0x2800-0x28ff]
pci 0000:01:04.0: reg 0x14: [mem 0xf1fe0000-0xf1fe01ff]
pci 0000:01:04.0: PME# supported from D0 D3hot D3cold
pci 0000:01:04.2: [0e11:b204] type 00 class 0x088000
pci 0000:01:04.2: reg 0x10: [io 0x3400-0x34ff]
pci 0000:01:04.2: reg 0x14: [mem 0xf1fd0000-0xf1fd07ff]
pci 0000:01:04.2: reg 0x18: [mem 0xf1fc0000-0xf1fc3fff]
pci 0000:01:04.2: reg 0x1c: [mem 0xf1f00000-0xf1f7ffff]
pci 0000:01:04.2: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:04.2: PME# supported from D0 D3hot D3cold
pci 0000:01:04.4: [103c:3300] type 00 class 0x0c0300
pci 0000:01:04.4: reg 0x20: [io 0x3800-0x381f]
pci 0000:01:04.4: PME# supported from D0 D3hot D3cold
pci 0000:01:04.6: [103c:3302] type 00 class 0x0c0701
pci 0000:01:04.6: reg 0x10: [mem 0xf1ef0000-0xf1ef00ff]
pci 0000:01:04.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff]
pci 0000:00:1e.0: bridge window [mem 0xf1e00000-0xf1ffffff]
pci 0000:00:1e.0: bridge window [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:00:1e.0: bridge window [mem 0xe7000000-0xfbffffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x1000-0x5fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0x0fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed00000-0xfed44fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03bb window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03c0-0x03df window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *7 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *7 10 11)
vgaarb: setting as boot device: PCI:0000:01:03.0
vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:03.0
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus 3e
PCI: root bus 3e: using default resources
PCI: Probing PCI hardware (bus 3e)
ACPI: \: failed to evaluate _DSM (0x1001)
PCI host bridge to bus 0000:3e
pci_bus 0000:3e: root bus resource [io 0x0000-0xffff]
pci_bus 0000:3e: root bus resource [mem 0x00000000-0xffffffffff]
pci_bus 0000:3e: No busn resource found for root bus, will use [bus 3e-ff]
pci 0000:3e:00.0: [8086:2c70] type 00 class 0x060000
pci 0000:3e:00.1: [8086:2d81] type 00 class 0x060000
pci 0000:3e:02.0: [8086:2d90] type 00 class 0x060000
pci 0000:3e:02.1: [8086:2d91] type 00 class 0x060000
pci 0000:3e:02.2: [8086:2d92] type 00 class 0x060000
pci 0000:3e:02.3: [8086:2d93] type 00 class 0x060000
pci 0000:3e:02.4: [8086:2d94] type 00 class 0x060000
pci 0000:3e:02.5: [8086:2d95] type 00 class 0x060000
pci 0000:3e:03.0: [8086:2d98] type 00 class 0x060000
pci 0000:3e:03.1: [8086:2d99] type 00 class 0x060000
pci 0000:3e:03.2: [8086:2d9a] type 00 class 0x060000
pci 0000:3e:03.4: [8086:2d9c] type 00 class 0x060000
pci 0000:3e:04.0: [8086:2da0] type 00 class 0x060000
pci 0000:3e:04.1: [8086:2da1] type 00 class 0x060000
pci 0000:3e:04.2: [8086:2da2] type 00 class 0x060000
pci 0000:3e:04.3: [8086:2da3] type 00 class 0x060000
pci 0000:3e:05.0: [8086:2da8] type 00 class 0x060000
pci 0000:3e:05.1: [8086:2da9] type 00 class 0x060000
pci 0000:3e:05.2: [8086:2daa] type 00 class 0x060000
pci 0000:3e:05.3: [8086:2dab] type 00 class 0x060000
pci 0000:3e:06.0: [8086:2db0] type 00 class 0x060000
pci 0000:3e:06.1: [8086:2db1] type 00 class 0x060000
pci 0000:3e:06.2: [8086:2db2] type 00 class 0x060000
pci 0000:3e:06.3: [8086:2db3] type 00 class 0x060000
pci_bus 0000:3e: busn_res: [bus 3e-ff] end is updated to 3e
PCI: Discovered peer bus 3f
PCI: root bus 3f: using default resources
PCI: Probing PCI hardware (bus 3f)
ACPI: \: failed to evaluate _DSM (0x1001)
PCI host bridge to bus 0000:3f
pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
pci_bus 0000:3f: root bus resource [mem 0x00000000-0xffffffffff]
pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
pci 0000:3f:00.0: [8086:2c70] type 00 class 0x060000
pci 0000:3f:00.1: [8086:2d81] type 00 class 0x060000
pci 0000:3f:02.0: [8086:2d90] type 00 class 0x060000
pci 0000:3f:02.1: [8086:2d91] type 00 class 0x060000
pci 0000:3f:02.2: [8086:2d92] type 00 class 0x060000
pci 0000:3f:02.3: [8086:2d93] type 00 class 0x060000
pci 0000:3f:02.4: [8086:2d94] type 00 class 0x060000
pci 0000:3f:02.5: [8086:2d95] type 00 class 0x060000
pci 0000:3f:03.0: [8086:2d98] type 00 class 0x060000
pci 0000:3f:03.1: [8086:2d99] type 00 class 0x060000
pci 0000:3f:03.2: [8086:2d9a] type 00 class 0x060000
pci 0000:3f:03.4: [8086:2d9c] type 00 class 0x060000
pci 0000:3f:04.0: [8086:2da0] type 00 class 0x060000
pci 0000:3f:04.1: [8086:2da1] type 00 class 0x060000
pci 0000:3f:04.2: [8086:2da2] type 00 class 0x060000
pci 0000:3f:04.3: [8086:2da3] type 00 class 0x060000
pci 0000:3f:05.0: [8086:2da8] type 00 class 0x060000
pci 0000:3f:05.1: [8086:2da9] type 00 class 0x060000
pci 0000:3f:05.2: [8086:2daa] type 00 class 0x060000
pci 0000:3f:05.3: [8086:2dab] type 00 class 0x060000
pci 0000:3f:06.0: [8086:2db0] type 00 class 0x060000
pci 0000:3f:06.1: [8086:2db1] type 00 class 0x060000
pci 0000:3f:06.2: [8086:2db2] type 00 class 0x060000
pci 0000:3f:06.3: [8086:2db3] type 00 class 0x060000
pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
e820: reserve RAM buffer [mem 0xd762f000-0xd7ffffff]
e820: reserve RAM buffer [mem 0xd763d000-0xd7ffffff]
e820: reserve RAM buffer [mem 0x1027fff000-0x1027ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [io 0x0408-0x040f] has been reserved
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0700-0x071f] has been reserved
system 00:00: [io 0x0880-0x08ff] has been reserved
system 00:00: [io 0x0900-0x097f] has been reserved
system 00:00: [io 0x0c80-0x0c83] has been reserved
system 00:00: [io 0x0cd4-0x0cd7] has been reserved
system 00:00: [io 0x0f50-0x0f58] has been reserved
system 00:00: [io 0x0ca0-0x0ca1] has been reserved
system 00:00: [io 0x0ca4-0x0ca5] has been reserved
system 00:00: [io 0x02f8-0x02ff] has been reserved
system 00:00: [mem 0xe0000000-0xe3ffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:00: [mem 0xe7ffe000-0xe7ffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:04:00.0: BAR 6: assigned [mem 0xfb300000-0xfb37ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 04]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xfb300000-0xfb7fffff]
pci 0000:00:02.0: PCI bridge to [bus 05]
pci 0000:00:03.0: PCI bridge to [bus 10-12]
pci 0000:00:04.0: PCI bridge to [bus 13]
pci 0000:00:05.0: PCI bridge to [bus 14-16]
pci 0000:00:06.0: PCI bridge to [bus 17-19]
pci 0000:00:07.0: PCI bridge to [bus 0d-0f]
pci 0000:0a:00.0: BAR 6: assigned [mem 0xfbb00000-0xfbb7ffff pref]
pci 0000:00:08.0: PCI bridge to [bus 0a-0c]
pci 0000:00:08.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:08.0: bridge window [mem 0xfbb00000-0xfbffffff]
pci 0000:00:09.0: PCI bridge to [bus 07-09]
pci 0000:00:0a.0: PCI bridge to [bus 06]
pci 0000:02:00.0: BAR 6: no space for [mem size 0x00010000 pref]
pci 0000:02:00.0: BAR 6: failed to assign [mem size 0x00010000 pref]
pci 0000:02:00.1: BAR 6: no space for [mem size 0x00010000 pref]
pci 0000:02:00.1: BAR 6: failed to assign [mem size 0x00010000 pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xf2000000-0xf5ffffff]
pci 0000:03:00.0: BAR 6: no space for [mem size 0x00010000 pref]
pci 0000:03:00.0: BAR 6: failed to assign [mem size 0x00010000 pref]
pci 0000:03:00.1: BAR 6: no space for [mem size 0x00010000 pref]
pci 0000:03:00.1: BAR 6: failed to assign [mem size 0x00010000 pref]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [mem 0xf6000000-0xf9ffffff]
pci 0000:01:03.0: BAR 6: assigned [mem 0xf1e00000-0xf1e1ffff pref]
pci 0000:01:04.2: BAR 6: assigned [mem 0xf1e20000-0xf1e2ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 01]
pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff]
pci 0000:00:1e.0: bridge window [mem 0xf1e00000-0xf1ffffff]
pci 0000:00:1e.0: bridge window [mem 0xe8000000-0xefffffff 64bit pref]
pci_bus 0000:00: resource 4 [mem 0xe7000000-0xfbffffff window]
pci_bus 0000:00: resource 5 [io 0x1000-0x5fff window]
pci_bus 0000:00: resource 6 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 7 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff window]
pci_bus 0000:00: resource 9 [mem 0xfed00000-0xfed44fff window]
pci_bus 0000:00: resource 10 [io 0x03b0-0x03bb window]
pci_bus 0000:00: resource 11 [io 0x03c0-0x03df window]
pci_bus 0000:00: resource 12 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:04: resource 1 [mem 0xfb300000-0xfb7fffff]
pci_bus 0000:0a: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:0a: resource 1 [mem 0xfbb00000-0xfbffffff]
pci_bus 0000:02: resource 1 [mem 0xf2000000-0xf5ffffff]
pci_bus 0000:03: resource 1 [mem 0xf6000000-0xf9ffffff]
pci_bus 0000:01: resource 0 [io 0x2000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xf1e00000-0xf1ffffff]
pci_bus 0000:01: resource 2 [mem 0xe8000000-0xefffffff 64bit pref]
pci_bus 0000:01: resource 4 [mem 0xe7000000-0xfbffffff window]
pci_bus 0000:01: resource 5 [io 0x1000-0x5fff window]
pci_bus 0000:01: resource 6 [io 0x0000-0x03af window]
pci_bus 0000:01: resource 7 [io 0x03e0-0x0cf7 window]
pci_bus 0000:01: resource 8 [io 0x0d00-0x0fff window]
pci_bus 0000:01: resource 9 [mem 0xfed00000-0xfed44fff window]
pci_bus 0000:01: resource 10 [io 0x03b0-0x03bb window]
pci_bus 0000:01: resource 11 [io 0x03c0-0x03df window]
pci_bus 0000:01: resource 12 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:3e: resource 4 [io 0x0000-0xffff]
pci_bus 0000:3e: resource 5 [mem 0x00000000-0xffffffffff]
pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
pci_bus 0000:3f: resource 5 [mem 0x00000000-0xffffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 32768 (order: 8, 1048576 bytes)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
NET: Registered protocol family 1
pci 0000:01:03.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 23120K (ffff8800352c9000 - ffff88003695d000)
DMAR: Host address width 39
DMAR: DRHD base: 0x000000e7ffe000 flags: 0x1
DMAR: dmar0: reg_base_addr e7ffe000 ver 1:0 cap c90780106f0462 ecap f0207e
DMAR: RMRR base: 0x000000d77fc000 end: 0x000000d77fdfff
DMAR: RMRR base: 0x000000d77f5000 end: 0x000000d77fafff
DMAR: RMRR base: 0x000000d763e000 end: 0x000000d763ffff
DMAR: ATSR flags: 0x0
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd362f000-0xd762f000] (64MB) mapped at [ffff8800d362f000-ffff8800d762efff]
futex hash table entries: 8192 (order: 7, 524288 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1458610366.630:1): initialized
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Key type big_key registered
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x2C
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (8 C)
ERST: Failed to get Error Log Address Range.
GHES: APEI firmware first mode is enabled by WHEA _OSC.
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 20, io mem 0xf1df0000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.5-1.el7.elrepo.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.5-1.el7.elrepo.x86_64 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 23, io base 0x00001020
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 4.4.5-1.el7.elrepo.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001040
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 4.4.5-1.el7.elrepo.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001060
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 4.4.5-1.el7.elrepo.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:01:04.4: UHCI Host Controller
uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 6
uhci_hcd 0000:01:04.4: detected 8 ports
uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:01:04.4: irq 22, io base 0x00003800
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 4.4.5-1.el7.elrepo.x86_64 uhci_hcd
usb usb6: SerialNumber: 0000:01:04.4
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbcore: registered new interface driver wishbone_serial
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Bridge firewalling registered
microcode: CPU0 sig=0x206c2, pf=0x1, revision=0xc
microcode: CPU1 sig=0x206c2, pf=0x1, revision=0xc
microcode: CPU2 sig=0x206c2, pf=0x1, revision=0xc
microcode: CPU3 sig=0x206c2, pf=0x1, revision=0xc
microcode: CPU4 sig=0x206c2, pf=0x1, revision=0xc
microcode: CPU5 sig=0x206c2, pf=0x1, revision=0xc
microcode: CPU6 sig=0x206c2, pf=0x1, revision=0xc
microcode: CPU7 sig=0x206c2, pf=0x1, revision=0xc
microcode: CPU8 sig=0x206c2, pf=0x1, revision=0xc
microcode: CPU9 sig=0x206c2, pf=0x1, revision=0xc
microcode: CPU10 sig=0x206c2, pf=0x1, revision=0xc
microcode: CPU11 sig=0x206c2, pf=0x1, revision=0xc
microcode: CPU12 sig=0x206c2, pf=0x1, revision=0xc
microcode: CPU13 sig=0x206c2, pf=0x1, revision=0xc
microcode: CPU14 sig=0x206c2, pf=0x1, revision=0xc
microcode: CPU15 sig=0x206c2, pf=0x1, revision=0xc
microcode: CPU16 sig=0x206c2, pf=0x1, revision=0xc
microcode: CPU17 sig=0x206c2, pf=0x1, revision=0xc
microcode: CPU18 sig=0x206c2, pf=0x1, revision=0xc
microcode: CPU19 sig=0x206c2, pf=0x1, revision=0xc
microcode: CPU20 sig=0x206c2, pf=0x1, revision=0xc
microcode: CPU21 sig=0x206c2, pf=0x1, revision=0xc
microcode: CPU22 sig=0x206c2, pf=0x1, revision=0xc
microcode: CPU23 sig=0x206c2, pf=0x1, revision=0xc
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
rtc_cmos 00:04: setting system clock to 2016-03-22 01:32:47 UTC (1458610367)
Freeing unused kernel memory: 1768K (ffffffff81bb1000 - ffffffff81d6b000)
random: systemd urandom read with 3 bits of entropy available
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Reached target Timers.
systemd[1]: Starting Timers.
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting Local File Systems.
systemd[1]: Created slice -.slice.
systemd[1]: Starting -.slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Started dracut ask for additional cmdline parameters.
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting Journal Service...
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Reached target Sockets.
systemd[1]: Starting Sockets.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Started Journal Service.
usb 6-1: new full-speed USB device number 2 using uhci_hcd
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
usb 5-1: new low-speed USB device number 2 using uhci_hcd
usb 6-1: New USB device found, idVendor=03f0, idProduct=1027
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: Virtual Keyboard
usb 6-1: Manufacturer: HP
input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb6/6-1/6-1:1.0/0003:03F0:1027.0001/input/input4
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
bnx2: QLogic bnx2 Gigabit Ethernet Driver v2.2.6 (January 29, 2014)
bnx2 0000:02:00.0 eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f4000000, IRQ 16, node addr 78:e7:d1:8d:53:5e
HP HPSA Driver (v 3.4.14-0)
hpsa 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
hpsa 0000:04:00.0: MSI-X capable controller
hpsa 0000:04:00.0: only 16 MSI-X vectors available
hpsa 0000:04:00.0: Logical aborts not supported
hpsa 0000:04:00.0: HP SSD Smart Path aborts not supported
bnx2 0000:02:00.1 eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f2000000, IRQ 17, node addr 78:e7:d1:8d:53:60
bnx2 0000:03:00.0 eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f8000000, IRQ 18, node addr 78:e7:d1:8d:53:62
bnx2 0000:03:00.1 eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f6000000, IRQ 19, node addr 78:e7:d1:8d:53:64
libata version 3.00 loaded.
hid-generic 0003:03F0:1027.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1/input0
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb6/6-1/6-1:1.1/0003:03F0:1027.0002/input/input5
hid-generic 0003:03F0:1027.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1/input1
scsi host0: hpsa
[drm] Initialized drm 1.1.0 20060810
hpsa 0000:04:00.0: scsi 0:3:0:0: added RAID HP P410i controller SSDSmartPathCap- En- Exp=1
scsi 0:0:0:0: RAID HP P410i 3.00 PQ: 0 ANSI: 0
hpsa 0000:0a:00.0: can't disable ASPM; OS doesn't have ASPM control
hpsa 0000:0a:00.0: MSI-X capable controller
hpsa 0000:0a:00.0: only 16 MSI-X vectors available
hpsa 0000:0a:00.0: Logical aborts not supported
hpsa 0000:0a:00.0: HP SSD Smart Path aborts not supported
scsi host1: hpsa
[drm] radeon kernel modesetting enabled.
bnx2 0000:02:00.0 enp2s0f0: renamed from eth0
AMD IOMMUv2 driver by Joerg Roedel
hpsa 0000:0a:00.0: scsi 1:0:0:0: masked Direct-Access ATA Samsung SSD 840 PHYS DRV SSDSmartPathCap- En- Exp=0
hpsa 0000:0a:00.0: scsi 1:0:1:0: masked Direct-Access ATA ST9500420ASG PHYS DRV SSDSmartPathCap- En- Exp=0
hpsa 0000:0a:00.0: scsi 1:1:0:0: added Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
hpsa 0000:0a:00.0: scsi 1:1:0:1: added Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
hpsa 0000:0a:00.0: scsi 1:3:0:0: added RAID HP P410 controller SSDSmartPathCap- En- Exp=1
scsi 1:1:0:0: Direct-Access HP LOGICAL VOLUME 3.52 PQ: 0 ANSI: 5
scsi 1:1:0:1: Direct-Access HP LOGICAL VOLUME 3.52 PQ: 0 ANSI: 5
AMD IOMMUv2 functionality not available on this system
scsi 1:3:0:0: RAID HP P410 3.52 PQ: 0 ANSI: 5
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
sd 1:1:0:0: [sda] 1000149680 512-byte logical blocks: (512 GB/477 GiB)
sd 1:1:0:1: [sdb] 976707632 512-byte logical blocks: (500 GB/466 GiB)
[drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x103C:0x31FB).
[drm] register mmio base: 0xF1FF0000
[drm] register mmio size: 65536
radeon 0000:01:03.0: VRAM: 128M 0x00000000E8000000 - 0x00000000EFFFFFFF (64M used)
radeon 0000:01:03.0: GTT: 512M 0x00000000C8000000 - 0x00000000E7FFFFFF
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 16bits DDR
[TTM] Zone kernel: Available graphics memory: 32982128 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 64M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
sd 1:1:0:1: [sdb] Write Protect is off
sd 1:1:0:1: [sdb] Mode Sense: 6b 00 00 08
sd 1:1:0:1: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:1:0:0: [sda] Write Protect is off
sd 1:1:0:0: [sda] Mode Sense: 6b 00 00 08
sd 1:1:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
usb 5-1: New USB device found, idVendor=046d, idProduct=c062
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: USB Laser Mouse
sd 1:1:0:0: [sda] Attached SCSI disk
usb 5-1: Manufacturer: Logitech
[drm] PCI GART of 512M enabled (table at 0x0000000036100000).
radeon 0000:01:03.0: WB disabled
radeon 0000:01:03.0: fence driver on ring 0 use gpu addr 0x00000000c8000000 and cpu addr 0xffff880036423000
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] Loading R100 Microcode
[drm] radeon: ring at 0x00000000C8001000
[drm] ring test succeeded in 1 usecs
bnx2 0000:02:00.1 enp2s0f1: renamed from eth1
[drm] ib test succeeded in 0 usecs
input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/0003:046D:C062.0003/input/input6
[drm] No TV DAC info found in BIOS
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC1
[drm] Connector 1:
[drm] VGA-2
[drm] DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c
[drm] Encoders:
[drm] CRT2: INTERNAL_DAC2
hid-generic 0003:046D:C062.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1d.3-1/input0
sdb: sdb1
sd 1:1:0:1: [sdb] Attached SCSI disk
[drm] fb mappable at 0xE8040000
[drm] vram apper at 0xE8000000
[drm] size 786432
[drm] fb depth is 8
[drm] pitch is 1024
fbcon: radeondrmfb (fb0) is primary device
scsi host2: ata_piix
scsi host3: ata_piix
ata1: SATA max UDMA/133 cmd 0x1080 ctl 0x1088 bmdma 0x10a0 irq 17
ata2: SATA max UDMA/133 cmd 0x1090 ctl 0x1098 bmdma 0x10a8 irq 17
bnx2 0000:03:00.0 enp3s0f0: renamed from eth2
Console: switching to colour frame buffer device 128x48
radeon 0000:01:03.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.43.0 20080528 for 0000:01:03.0 on minor 0
bnx2 0000:03:00.1 enp3s0f1: renamed from eth3
tsc: Refined TSC clocksource calibration: 2665.908 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x266d7102a13, max_idle_ns: 440795210634 ns
ata2.00: SATA link down (SStatus 4 SControl 300)
ata2.01: SATA link down (SStatus 4 SControl 300)
ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.01: SATA link down (SStatus 4 SControl 300)
ata1.01: link offline, clearing class 3 to NONE
ata1.00: ATAPI: TEAC DV-W28S-VS, G.V0, max UDMA/100
ata1.00: configured for UDMA/100
scsi 2:0:0:0: CD-ROM TEAC DV-W28S-VS G.V0 PQ: 0 ANSI: 5
sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
random: nonblocking pool is initialized
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
clocksource: Switched to clocksource tsc
systemd-journald[280]: Received SIGTERM from PID 1 (systemd).
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit: type=1404 audit(1458610369.883:2): selinux=0 auid=4294967295 ses=4294967295
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: Inserted module 'ip_tables'
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
EXT4-fs (dm-0): re-mounted. Opts: (null)
systemd-journald[731]: Received request to flush runtime journal from PID 1
loop: module loaded
EXT4-fs (loop0): barriers disabled
EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: nobarrier,user_xattr
pcc-cpufreq: (v1.10.00) driver loaded with frequency limits: 1600 MHz, 2666 MHz
power_meter ACPI000D:00: Found ACPI power meter.
power_meter ACPI000D:00: Ignoring unsafe software power cap!
ipmi message handler version 39.2
Floppy drive(s): fd0 is 1.44M
EDAC MC: Ver: 3.0.0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ipmi_si IPI0001:00: ipmi_si: probing via ACPI
ipmi_si IPI0001:00: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
IPMI System Interface driver.
ipmi_si 0000:01:04.6: probing via PCI
ipmi_si 0000:01:04.6: [mem 0xf1ef0000-0xf1ef00ff] regsize 1 spacing 1 irq 21
ipmi_si: Adding PCI-specified kcs state machine
ipmi_si: probing via SMBIOS
input: PC Speaker as /devices/platform/pcspkr/input/input7
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ACPI Warning: SystemIO range 0x0000000000000928-0x000000000000092F conflicts with OpRegion 0x0000000000000920-0x000000000000092F (\SGPE) (20150930/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
WARNING! power/level is deprecated; use power/control instead
EDAC MC1: Giving out device to module i7core_edac.c controller i7 core #1: DEV 0000:3e:03.0 (POLLED)
EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3e:03.0 (POLLED)
EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (POLLED)
EDAC PCI1: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED)
EDAC i7core: Driver loaded, 2 memory controller(s) found.
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 2 spacing 2 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf1ef0000, slave address 0x0, irq 21
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
scsi 0:0:0:0: Attached scsi generic sg0 type 12
sd 1:1:0:0: Attached scsi generic sg1 type 0
sd 1:1:0:1: Attached scsi generic sg2 type 0
gpio_ich: GPIO from 451 to 511 on gpio_ich
scsi 1:3:0:0: Attached scsi generic sg3 type 12
sr 2:0:0:0: Attached scsi generic sg4 type 5
hpwdt 0000:01:04.0: HP Watchdog Timer Driver: NMI decoding initialized, allow kernel dump: ON (default = 1/ON)
hpwdt 0000:01:04.0: HP Watchdog Timer Driver: 1.3.3, timer margin: 30 seconds (nowayout=0).
SSE version of gcm_enc/dec engaged.
Adding 10481660k swap on /dev/mapper/centos-swap. Priority:-1 extents:1 across:10481660k FS
SGI XFS with ACLs, security attributes, no debug enabled
XFS (sda1): Mounting V4 Filesystem
ipmi_si 0000:01:04.6: Using irq 21
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
ipmi_si 0000:01:04.6: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)
ipmi_si 0000:01:04.6: IPMI kcs interface initialized
ipmi device interface
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
XFS (sda1): Ending clean mount
device-mapper: thin: Data device (dm-4) discard unsupported: Disabling discard passdown.
floppy0: no floppy controllers found
audit: type=1305 audit(1458610374.043:3): audit_pid=1033 old=0 auid=4294967295 ses=4294967295 res=1
bnx2 0000:02:00.0 enp2s0f0: using MSIX
IPv6: ADDRCONF(NETDEV_UP): enp2s0f0: link is not ready
bnx2 0000:02:00.0 enp2s0f0: NIC Copper Link is Up, 1000 Mbps full duplex
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0f0: link becomes ready
Rounding down aligned max_sectors from 4294967295 to 4294967288
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT misc device (ioctl) driver 3.04.20
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
Adjusting tsc more than 11% (7341885 vs 6985503)
ACPI Error: SMBus/IPMI/GenericSerialBus write requires Buffer of length 66, found length 32 (20150930/exfield-418)
ACPI Error: Method parse/execution failed [\_SB.PMI0._PMM] (Node ffff880fe70ba0f0), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20150930/power_meter-338)