dmesg - galo1-unigine-valley
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.2.0-27-generic (buildd@lgw01-12) (gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu2) ) #32-Ubuntu SMP Fri Jan 22 04:49:08 UTC 2016 (Ubuntu 4.2.0-27.32-generic 4.2.8-ckt1)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cbc75fff] usable
BIOS-e820: [mem 0x00000000cbc76000-0x00000000cbc7cfff] ACPI NVS
BIOS-e820: [mem 0x00000000cbc7d000-0x00000000cc3a7fff] usable
BIOS-e820: [mem 0x00000000cc3a8000-0x00000000cc64bfff] reserved
BIOS-e820: [mem 0x00000000cc64c000-0x00000000db7c4fff] usable
BIOS-e820: [mem 0x00000000db7c5000-0x00000000db84dfff] reserved
BIOS-e820: [mem 0x00000000db84e000-0x00000000db8aafff] usable
BIOS-e820: [mem 0x00000000db8ab000-0x00000000db9dffff] ACPI NVS
BIOS-e820: [mem 0x00000000db9e0000-0x00000000dbffefff] reserved
BIOS-e820: [mem 0x00000000dbfff000-0x00000000dbffffff] usable
BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: System76, Inc. Galago UltraPro/W740SU , BIOS 4.6.5 12/12/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x21fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7E00000000 write-back
1 base 0200000000 mask 7FE0000000 write-back
2 base 00E0000000 mask 7FE0000000 uncachable
3 base 00DE000000 mask 7FFE000000 uncachable
4 base 00DD000000 mask 7FFF000000 uncachable
5 base 021FE00000 mask 7FFFE00000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 512MB, type WB
reg 2, base: 3584MB, range: 512MB, type UC
reg 3, base: 3552MB, range: 32MB, type UC
reg 4, base: 3536MB, range: 16MB, type UC
reg 5, base: 8702MB, range: 2MB, type UC
total RAM covered: 8142M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 8 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 3536MB, range: 16MB, type UC
reg 4, base: 3552MB, range: 32MB, type UC
reg 5, base: 4GB, range: 4GB, type WB
reg 6, base: 8GB, range: 512MB, type WB
reg 7, base: 8702MB, range: 2MB, type UC
e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdc000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd7a0-0x000fd7af] mapped at [ffff8800000fd7a0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01ff0000, 0x01ff0fff] PGTABLE
BRK [0x01ff1000, 0x01ff1fff] PGTABLE
BRK [0x01ff2000, 0x01ff2fff] PGTABLE
init_memory_mapping: [mem 0x21fc00000-0x21fdfffff]
[mem 0x21fc00000-0x21fdfffff] page 2M
BRK [0x01ff3000, 0x01ff3fff] PGTABLE
init_memory_mapping: [mem 0x200000000-0x21fbfffff]
[mem 0x200000000-0x21fbfffff] page 2M
init_memory_mapping: [mem 0x1e0000000-0x1ffffffff]
[mem 0x1e0000000-0x1ffffffff] page 1G
init_memory_mapping: [mem 0x00100000-0xcbc75fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xcbbfffff] page 2M
[mem 0xcbc00000-0xcbc75fff] page 4k
init_memory_mapping: [mem 0xcbc7d000-0xcc3a7fff]
[mem 0xcbc7d000-0xcbdfffff] page 4k
[mem 0xcbe00000-0xcc1fffff] page 2M
[mem 0xcc200000-0xcc3a7fff] page 4k
BRK [0x01ff4000, 0x01ff4fff] PGTABLE
init_memory_mapping: [mem 0xcc64c000-0xdb7c4fff]
[mem 0xcc64c000-0xcc7fffff] page 4k
[mem 0xcc800000-0xdb5fffff] page 2M
[mem 0xdb600000-0xdb7c4fff] page 4k
BRK [0x01ff5000, 0x01ff5fff] PGTABLE
init_memory_mapping: [mem 0xdb84e000-0xdb8aafff]
[mem 0xdb84e000-0xdb8aafff] page 4k
init_memory_mapping: [mem 0xdbfff000-0xdbffffff]
[mem 0xdbfff000-0xdbffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1dfffffff]
[mem 0x100000000-0x1dfffffff] page 1G
RAMDISK: [mem 0x33cfc000-0x35e75fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DB9B3080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DB9BFBF8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000DB9B3190 00CA67 (v02 ALASKA A M I 00000024 INTL 20091112)
ACPI: FACS 0x00000000DB9DE080 000040
ACPI: APIC 0x00000000DB9BFD08 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DB9BFDA0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DB9BFDE8 0015C2 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
ACPI: SSDT 0x00000000DB9C13B0 0004F7 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000DB9C18A8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: MCFG 0x00000000DB9C2380 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000DB9C23C0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000DB9C23F8 000315 (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 0x00000000DB9C2710 001917 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
ACPI: DMAR 0x00000000DB9C4028 0000B8 (v01 INTEL HSW 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021fdfffff]
NODE_DATA(0) allocated [mem 0x21fdf6000-0x21fdfafff]
[ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217400000-ffff88021f3fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000021fdfffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x00000000cbc75fff]
node 0: [mem 0x00000000cbc7d000-0x00000000cc3a7fff]
node 0: [mem 0x00000000cc64c000-0x00000000db7c4fff]
node 0: [mem 0x00000000db84e000-0x00000000db8aafff]
node 0: [mem 0x00000000dbfff000-0x00000000dbffffff]
node 0: [mem 0x0000000100000000-0x000000021fdfffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000021fdfffff]
On node 0 totalpages: 2077460
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 13974 pages used for memmap
DMA32 zone: 894328 pages, LIFO batch:31
Normal zone: 18424 pages used for memmap
Normal zone: 1179136 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xdd200000-0xdf1fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcbc76000-0xcbc7cfff]
PM: Registered nosave memory: [mem 0xcc3a8000-0xcc64bfff]
PM: Registered nosave memory: [mem 0xdb7c5000-0xdb84dfff]
PM: Registered nosave memory: [mem 0xdb8ab000-0xdb9dffff]
PM: Registered nosave memory: [mem 0xdb9e0000-0xdbffefff]
PM: Registered nosave memory: [mem 0xdc000000-0xdcffffff]
PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff]
PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88021fa00000 s96728 r8192 d30248 u262144
pcpu-alloc: s96728 r8192 d30248 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2044977
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8060660K/8309840K available (8154K kernel code, 1238K rwdata, 3804K rodata, 1460K init, 1292K bss, 249180K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:488 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1995.472 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.94 BogoMIPS (lpj=7981888)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 28K (ffffffff81ea4000 - ffffffff81eab000)
ftrace: allocating 30933 entries in 121 pages
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
DMAR: RMRR base: 0x000000dbed1000 end: 0x000000dbedffff
DMAR: RMRR base: 0x000000dd000000 end: 0x000000df1fffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-4750HQ CPU @ 2.00GHz (fam: 06, model: 46, stepping: 01)
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (31927.55 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xcbc76000-0xcbc7cfff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xdb8ab000-0xdb9dffff] (1265664 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 11:30:17, date: 03/15/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880215A35400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880215A3A000 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880215A2F200 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
pci 0000:00:00.0: [8086:0d04] type 00 class 0x060000
pci 0000:00:02.0: [8086:0d26] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:03.0: [8086:0d0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xf7e34000-0xf7e37fff 64bit]
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7e20000-0xf7e2ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7e3f000-0xf7e3f00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:153b] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf7e00000-0xf7e1ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf7e3d000-0xf7e3dfff]
pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7e3c000-0xf7e3c3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7e30000-0xf7e33fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7e3b000-0xf7e3b3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7e3a000-0xf7e3a7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7e39000-0xf7e390ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [10ec:5229] type 00 class 0xff0000
pci 0000:02:00.0: reg 0x10: [mem 0xf7d00000-0xf7d00fff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D1 D2 D3hot
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:03:00.0: [8086:08b1] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xcbc76000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcc3a8000-0xcfffffff]
e820: reserve RAM buffer [mem 0xdb7c5000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdb8ab000-0xdbffffff]
e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x1c00-0x1cfe] has been reserved
system 00:01: [io 0x1d00-0x1dfe] has been reserved
system 00:01: [io 0x1e00-0x1efe] has been reserved
system 00:01: [io 0x1f00-0x1ffe] has been reserved
system 00:01: [io 0x1800-0x18fe] could not be reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: [io 0x3322-0x3323] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:05: Plug and Play ACPI device, IDs SYN1213 PNP0f13 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xf7fef000-0xf7feffff] has been reserved
system 00:07: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window]
pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 34280K (ffff880033cfc000 - ffff880035e76000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd77c5000-0xdb7c5000] (64MB) mapped at [ffff8800d77c5000-ffff8800db7c4fff]
microcode: CPU0 sig=0x40661, pf=0x20, revision=0xa
microcode: CPU1 sig=0x40661, pf=0x20, revision=0xa
microcode: CPU2 sig=0x40661, pf=0x20, revision=0xa
microcode: CPU3 sig=0x40661, pf=0x20, revision=0xa
microcode: CPU4 sig=0x40661, pf=0x20, revision=0xa
microcode: CPU5 sig=0x40661, pf=0x20, revision=0xa
microcode: CPU6 sig=0x40661, pf=0x20, revision=0xa
microcode: CPU7 sig=0x40661, pf=0x20, revision=0xa
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1458041418.644:1): initialized
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90001000000, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x46
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (off-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ0] (14 C)
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT0] (battery present)
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.2.0-27-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.2.0-27-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e3c000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 4.2.0-27-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e3b000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 4.2.0-27-generic ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SYNM] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc rtc0: invalid alarm value: 2016-3-15 11:30:62
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 9421ce78f7dd6932d7a71d3bab89bb036afa29eb'
registered taskstats version 1
zswap: loading zswap
zswap: using zbud pool
zswap: using lzo compressor
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 8:750:529
rtc_cmos 00:02: setting system clock to 2016-03-15 11:30:19 UTC (1458041419)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1460K (ffffffff81d37000 - ffffffff81ea4000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 24K (ffff8800017fa000 - ffff880001800000)
Freeing unused kernel memory: 292K (ffff880001bb7000 - ffff880001c00000)
random: systemd-udevd urandom read with 5 bits of entropy available
wmi: Mapper loaded
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 27
PTP clock support registered
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag led clo pio slum part ems apst
[drm] Initialized drm 1.1.0 20060810
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf7e3a000 port 0xf7e3a100 irq 28
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.5-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:90:f5:fb:f0:26
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[drm] Found 128MB of eLLC
[drm] Memory usable by graphics device = 2048M
checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
[drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 0
usb 1-4: new full-speed USB device number 2 using xhci_hcd
usb 3-1: new high-speed USB device number 2 using ehci-pci
usb 4-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: READ LOG DMA EXT failed, trying unqueued
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0BB6Q, max UDMA/133
ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 BB6Q PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-4: New USB device found, idVendor=8087, idProduct=07dc
usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
usb 3-1: New USB device found, idVendor=8087, idProduct=8008
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 6 ports detected
usb 4-1: New USB device found, idVendor=8087, idProduct=8000
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 8 ports detected
usb 1-10: new high-speed USB device number 3 using xhci_hcd
usb 1-10: New USB device found, idVendor=5986, idProduct=0536
usb 1-10: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-10: Product: BisonCam, NB Pro
usb 1-10: Manufacturer: Generic
usb 1-10: SerialNumber: 200901010001
raid6: sse2x1 gen() 6283 MB/s
raid6: sse2x1 xor() 4951 MB/s
raid6: sse2x2 gen() 8040 MB/s
tsc: Refined TSC clocksource calibration: 1995.378 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3986404c536, max_idle_ns: 881590442461 ns
raid6: sse2x2 xor() 5415 MB/s
raid6: sse2x4 gen() 9266 MB/s
raid6: sse2x4 xor() 6524 MB/s
raid6: avx2x1 gen() 12363 MB/s
raid6: avx2x2 gen() 14261 MB/s
psmouse serio2: synaptics: queried max coordinates: x [..5680], y [..4728]
raid6: avx2x4 gen() 16490 MB/s
raid6: using algorithm avx2x4 gen() 16490 MB/s
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function:
psmouse serio2: synaptics: queried min coordinates: x [1262..], y [1124..]
avx : 19209.000 MB/sec
Btrfs loaded
psmouse serio2: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126c00/0x0, board id: 2439, fw id: 1215751
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input10
systemd[1]: Failed to insert module 'kdbus': Function not implemented
systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
clocksource: Switched to clocksource tsc
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Created slice Root Slice.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on udev Control Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Started Braille Device Support.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started udev Coldplug all Devices.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started LVM2 metadata daemon.
systemd[1]: Started Journal Service.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[313]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7260-15.ucode failed with error -2
iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7260-14.ucode failed with error -2
usbcore: registered new interface driver btusb
iwlwifi 0000:03:00.0: loaded firmware version 25.30.13.0 op_mode iwlmvm
media: Linux media interface: v0.10
Linux video capture interface: v2.00
Bluetooth: hci0: read Intel version: 370710018002030d00
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
iwlwifi 0000:03:00.0: L1 Disabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Disabled - LTR Enabled
uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:0536)
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
input: BisonCam, NB Pro as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/input/input14
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
snd_hda_codec_via hdaudioC1D0: autoconfig for VT1802: line_outs=1 (0x24/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_via hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_via hdaudioC1D0: hp_outs=1 (0x25/0x0/0x0/0x0/0x0)
snd_hda_codec_via hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_via hdaudioC1D0: inputs:
snd_hda_codec_via hdaudioC1D0: Internal Mic=0x30
snd_hda_codec_via hdaudioC1D0: Mic=0x2b
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
Adding 4194300k swap on /dev/sda2. Priority:-1 extents:1 across:4194300k SSFS
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
random: nonblocking pool is initialized
audit: type=1400 audit(1458041422.099:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=634 comm="apparmor_parser"
audit: type=1400 audit(1458041422.099:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=634 comm="apparmor_parser"
audit: type=1400 audit(1458041422.099:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=634 comm="apparmor_parser"
audit: type=1400 audit(1458041422.099:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=634 comm="apparmor_parser"
audit: type=1400 audit(1458041422.099:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=634 comm="apparmor_parser"
audit: type=1400 audit(1458041422.099:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=634 comm="apparmor_parser"
audit: type=1400 audit(1458041422.111:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=634 comm="apparmor_parser"
audit: type=1400 audit(1458041422.111:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=634 comm="apparmor_parser"
audit: type=1400 audit(1458041422.111:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=634 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
iwlwifi 0000:03:00.0: L1 Disabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Disabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Disabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Disabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
wlan0: authenticate with 00:17:df:aa:19:40
wlan0: send auth to 00:17:df:aa:19:40 (try 1/3)
wlan0: authenticated
wlan0: associate with 00:17:df:aa:19:40 (try 1/3)
wlan0: RX AssocResp from 00:17:df:aa:19:40 (capab=0x421 status=0 aid=49)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Regulatory domain changed to country: IS
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
wlan0: Limiting TX power to 14 dBm as advertised by 00:17:df:aa:19:40
wlan0: deauthenticating from 00:17:df:aa:19:40 by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend of devices complete after 590.947 msecs
------------[ cut here ]------------
WARNING: CPU: 0 PID: 182 at /build/linux-NgsOGa/linux-4.2.0/drivers/gpu/drm/i915/intel_display.c:9152 hsw_enable_pc8+0x53b/0x730 [i915]()
Power well on
Modules linked in: rfcomm ec_sys binfmt_misc bnep arc4 snd_hda_codec_hdmi snd_hda_codec_via snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm snd_pcm crct10dif_pclmul uvcvideo iwlmvm videobuf2_vmalloc crc32_pclmul videobuf2_memops videobuf2_core aesni_intel snd_seq_midi mac80211 snd_seq_midi_event aes_x86_64 lrw v4l2_common snd_rawmidi gf128mul videodev glue_helper ablk_helper input_leds media cryptd joydev btusb serio_raw btrtl btbcm snd_seq btintel iwlwifi rtsx_pci_ms memstick bluetooth cfg80211 snd_seq_device lpc_ich snd_timer snd mei_me shpchp mei soundcore tpm_infineon mac_hid parport_pc ppdev lp parport autofs4 btrfs xor raid6_pq dm_mirror dm_region_hash dm_log rtsx_pci_sdmmc i915 i2c_algo_bit drm_kms_helper
e1000e psmouse ahci drm libahci ptp rtsx_pci pps_core wmi video
CPU: 0 PID: 182 Comm: kworker/u16:5 Not tainted 4.2.0-27-generic #32-Ubuntu
Hardware name: System76, Inc. Galago UltraPro/W740SU , BIOS 4.6.5 12/12/2013
Workqueue: events_unbound async_run_entry_fn
0000000000000000 000000002de637ef ffff88021197bbd8 ffffffff817eae99
0000000000000000 ffff88021197bc30 ffff88021197bc18 ffffffff8107b9c6
00000000ffff5ddf ffff880211240000 ffff880215903370 ffff880215903380
Call Trace:
[] dump_stack+0x45/0x57
[] warn_slowpath_common+0x86/0xc0
[] warn_slowpath_fmt+0x55/0x70
[] hsw_enable_pc8+0x53b/0x730 [i915]
[] intel_suspend_complete+0x4d/0x80 [i915]
[] i915_drm_suspend_late+0x22/0x80 [i915]
[] ? i915_pm_poweroff_late+0x30/0x30 [i915]
[] i915_pm_suspend_late+0x27/0x30 [i915]
[] dpm_run_callback+0x7a/0xf0
[] __device_suspend_late+0xfd/0x210
[] async_suspend_late+0x1f/0xa0
[] async_run_entry_fn+0x4c/0x160
[] process_one_work+0x1aa/0x440
[] worker_thread+0x4b/0x4c0
[] ? process_one_work+0x440/0x440
[] kthread+0xd8/0xf0
[] ? kthread_create_on_node+0x1f0/0x1f0
[] ret_from_fork+0x3f/0x70
[] ? kthread_create_on_node+0x1f0/0x1f0
---[ end trace 664c9fdbc2638115 ]---
PM: late suspend of devices complete after 13.724 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 15.924 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
Broke affinity for irq 23
smpboot: CPU 5 is now offline
Broke affinity for irq 16
Broke affinity for irq 23
Broke affinity for irq 28
smpboot: CPU 6 is now offline
Broke affinity for irq 16
Broke affinity for irq 23
Broke affinity for irq 28
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
cache: parent cpu4 should not be sleeping
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
cache: parent cpu5 should not be sleeping
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
cache: parent cpu6 should not be sleeping
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
cache: parent cpu7 should not be sleeping
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 14.130 msecs
PM: early resume of devices complete after 69.217 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
rtc_cmos 00:02: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
usb 1-4: reset full-speed USB device number 2 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: configured for UDMA/133
usb 1-10: reset high-speed USB device number 3 using xhci_hcd
PM: resume of devices complete after 653.590 msecs
PM: Finishing wakeup.
Restarting tasks ...
pci_bus 0000:01: Allocating resources
pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
pci_bus 0000:02: Allocating resources
pcieport 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pcieport 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pci_bus 0000:03: Allocating resources
pcieport 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
pcieport 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
pcieport 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pcieport 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pcieport 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pcieport 0000:00:1c.1: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pcieport 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pcieport 0000:00:1c.3: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pcieport 0000:00:1c.0: BAR 14: assigned [mem 0xdf200000-0xdf3fffff]
pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xdf400000-0xdf5fffff 64bit pref]
pcieport 0000:00:1c.1: BAR 15: assigned [mem 0xdf600000-0xdf7fffff 64bit pref]
pcieport 0000:00:1c.3: BAR 15: assigned [mem 0xdf800000-0xdf9fffff 64bit pref]
pcieport 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pcieport 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
pcieport 0000:00:1c.3: BAR 13: assigned [io 0x5000-0x5fff]
done.
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
Bluetooth: hci0: read Intel version: 370710018002030d00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
e1000e: eth0 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
iwlwifi 0000:03:00.0: L1 Disabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Disabled - LTR Enabled
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
iwlwifi 0000:03:00.0: L1 Disabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Disabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
psmouse serio2: synaptics: queried max coordinates: x [..5680], y [..4728]
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
psmouse serio2: synaptics: queried min coordinates: x [1262..], y [1124..]
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
show_signal_msg: 57 callbacks suppressed
teamviewerd[1530]: segfault at 14 ip 00000000f778a586 sp 00000000f41e55a0 error 4 in libpthread-2.21.so[f7782000+19000]
clocksource: timekeeping watchdog: Marking clocksource 'tsc' as unstable because the skew is too large:
clocksource: 'hpet' wd_now: ffffffff wd_last: 160369a mask: ffffffff
clocksource: 'tsc' cs_now: 144ec0ec2 cs_last: 1096e3d2e mask: ffffffffffffffff
clocksource: Switched to clocksource hpet
wlan0: authenticate with 00:17:df:aa:18:df
wlan0: send auth to 00:17:df:aa:18:df (try 1/3)
wlan0: authenticated
wlan0: associate with 00:17:df:aa:18:df (try 1/3)
wlan0: RX AssocResp from 00:17:df:aa:18:df (capab=0x1 status=0 aid=27)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Regulatory domain changed to country: IS
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
wlan0: Limiting TX power to 17 dBm as advertised by 00:17:df:aa:18:df
wlan0: deauthenticated from 00:17:df:aa:18:df (Reason: 2=PREV_AUTH_NOT_VALID)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: authenticate with 00:17:df:aa:19:40
wlan0: send auth to 00:17:df:aa:19:40 (try 1/3)
wlan0: authenticated
wlan0: associate with 00:17:df:aa:19:40 (try 1/3)
wlan0: RX AssocResp from 00:17:df:aa:19:40 (capab=0x421 status=0 aid=113)
wlan0: associated
cfg80211: Regulatory domain changed to country: IS
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
wlan0: Limiting TX power to 14 dBm as advertised by 00:17:df:aa:19:40
wlan0: Limiting TX power to 14 dBm as advertised by 00:17:df:aa:19:40
wlan0: Limiting TX power to 14 dBm as advertised by 00:17:df:aa:19:40
wlan0: Limiting TX power to 14 dBm as advertised by 00:17:df:aa:19:40