dmesg - testr
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.2.0-25-generic (buildd@lgw01-13) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #30~14.04.1-Ubuntu SMP Mon Jan 18 16:25:56 UTC 2016 (Ubuntu 4.2.0-25.30~14.04.1-generic 4.2.6)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bfeaffff] usable
BIOS-e820: [mem 0x00000000bfeb0000-0x00000000bfecbfff] ACPI data
BIOS-e820: [mem 0x00000000bfecc000-0x00000000bfefffff] ACPI NVS
BIOS-e820: [mem 0x00000000bff00000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000013bffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: LENOVO 6457AN9/6457AN9, BIOS 7LETD0WW (2.30 ) 02/27/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x13c000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0C0000000 mask FC0000000 uncachable
1 base 13C000000 mask FFC000000 uncachable
2 base 000000000 mask F00000000 write-back
3 base 100000000 mask FC0000000 write-back
4 base 0BFF00000 mask FFFF00000 uncachable
5 disabled
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
original variable MTRRs
reg 0, base: 3GB, range: 1GB, type UC
reg 1, base: 5056MB, range: 64MB, type UC
reg 2, base: 0GB, range: 4GB, type WB
reg 3, base: 4GB, range: 1GB, type WB
reg 4, base: 3071MB, range: 1MB, type UC
total RAM covered: 4031M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 5 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3071MB, range: 1MB, type UC
reg 3, base: 4GB, range: 1GB, type WB
reg 4, base: 5056MB, range: 64MB, type UC
e820: update [mem 0xbff00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbfeb0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f68f0-0x000f68ff] mapped at [ffff8800000f68f0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01ff2000, 0x01ff2fff] PGTABLE
BRK [0x01ff3000, 0x01ff3fff] PGTABLE
BRK [0x01ff4000, 0x01ff4fff] PGTABLE
init_memory_mapping: [mem 0x13be00000-0x13bffffff]
[mem 0x13be00000-0x13bffffff] page 2M
BRK [0x01ff5000, 0x01ff5fff] PGTABLE
init_memory_mapping: [mem 0x120000000-0x13bdfffff]
[mem 0x120000000-0x13bdfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x11fffffff]
[mem 0x100000000-0x11fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbfeaffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xbfdfffff] page 2M
[mem 0xbfe00000-0xbfeaffff] page 4k
RAMDISK: [mem 0x344f6000-0x36272fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F68C0 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000BFEBB614 000094 (v01 LENOVO TP-7L 00002300 LTP 00000000)
ACPI: FACP 0x00000000BFEBB700 0000F4 (v03 LENOVO TP-7L 00002300 LNVO 00000001)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20150619/tbfadt-623)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe1Block: 0/32 (20150619/tbfadt-623)
ACPI BIOS Warning (bug): Optional FADT field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20150619/tbfadt-654)
ACPI: DSDT 0x00000000BFEBBB1D 01003C (v01 LENOVO TP-7L 00002300 MSFT 03000000)
ACPI: FACS 0x00000000BFEE4000 000040
ACPI: FACS 0x00000000BFEE4000 000040
ACPI: SSDT 0x00000000BFEBB8B4 000269 (v01 LENOVO TP-7L 00002300 MSFT 03000000)
ACPI: ECDT 0x00000000BFECBB59 000052 (v01 LENOVO TP-7L 00002300 LNVO 00000001)
ACPI: TCPA 0x00000000BFECBBAB 000032 (v02 LENOVO TP-7L 00002300 LNVO 00000001)
ACPI: APIC 0x00000000BFECBBDD 000068 (v01 LENOVO TP-7L 00002300 LNVO 00000001)
ACPI: MCFG 0x00000000BFECBC45 00003C (v01 LENOVO TP-7L 00002300 LNVO 00000001)
ACPI: HPET 0x00000000BFECBC81 000038 (v01 LENOVO TP-7L 00002300 LNVO 00000001)
ACPI: SLIC 0x00000000BFECBDF0 000176 (v01 LENOVO TP-7L 00002300 LTP 00000000)
ACPI: BOOT 0x00000000BFECBF66 000028 (v01 LENOVO TP-7L 00002300 LTP 00000001)
ACPI: ASF! 0x00000000BFECBF8E 000072 (v16 LENOVO TP-7L 00002300 PTL 00000001)
ACPI: SSDT 0x00000000BFEE26D9 00025F (v01 LENOVO TP-7L 00002300 INTL 20050513)
ACPI: SSDT 0x00000000BFEE2938 0000A6 (v01 LENOVO TP-7L 00002300 INTL 20050513)
ACPI: SSDT 0x00000000BFEE29DE 0004F7 (v01 LENOVO TP-7L 00002300 INTL 20050513)
ACPI: SSDT 0x00000000BFEE2ED5 0001D8 (v01 LENOVO TP-7L 00002300 INTL 20050513)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000013bffffff]
NODE_DATA(0) allocated [mem 0x13bff8000-0x13bffcfff]
[ffffea0000000000-ffffea0004ffffff] PMD -> [ffff880137600000-ffff88013b5fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000013bffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x00000000bfeaffff]
node 0: [mem 0x0000000100000000-0x000000013bffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000013bffffff]
On node 0 totalpages: 1031756
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 12219 pages used for memmap
DMA32 zone: 782000 pages, LIFO batch:31
Normal zone: 3840 pages used for memmap
Normal zone: 245760 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
PM: Registered nosave memory: [mem 0x000d4000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbfeb0000-0xbfecbfff]
PM: Registered nosave memory: [mem 0xbfecc000-0xbfefffff]
PM: Registered nosave memory: [mem 0xbff00000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
PM: Registered nosave memory: [mem 0xf4000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed13fff]
PM: Registered nosave memory: [mem 0xfed14000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xc0000000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88013bc00000 s96728 r8192 d30248 u1048576
pcpu-alloc: s96728 r8192 d30248 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1015612
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3948256K/4127024K available (7934K kernel code, 1242K rwdata, 3812K rodata, 1464K init, 1292K bss, 178768K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
NR_IRQS:16640 nr_irqs:440 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-1.
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2194.660 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.32 BogoMIPS (lpj=8778640)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff81ea6000 - ffffffff81ead000)
ftrace: allocating 30958 entries in 121 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz (fam: 06, model: 0f, stepping: 0b)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
.... node #0, CPUs: #1
TSC synchronization [CPU#0 -> CPU#1]:
Measured 1330439 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (8778.64 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xbfecc000-0xbfefffff] (212992 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 17:58:54, date: 03/13/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
Simple Boot Flag at 0x35 set to 0x1
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC description table is found, configuring boot EC
ACPI : EC: EC started
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880136564C00 0002C4 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8801364C8000 00085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880136468100 0000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880136464600 000085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PUBS] (on)
acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
acpi IBM0079:00: ACPI dock station (docks/bays count: 3)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window]
pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
pci 0000:00:01.0: [8086:2a01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:1049] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfe200000-0xfe21ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfe225000-0xfe225fff]
pci 0000:00:19.0: reg 0x18: [io 0x1840-0x185f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0x1860-0x187f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0x1880-0x189f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xfe226c00-0xfe226fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfe220000-0xfe223fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x18a0-0x18bf]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x18c0-0x18df]
pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x18e0-0x18ff]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xfe227000-0xfe2273ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2811] type 00 class 0x060100
pci 0000:00:1f.0: can't claim BAR 13 [io 0x1000-0x107f]: address conflict with ACPI CPU throttle [io 0x1010-0x1015]
pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 0x20: [io 0x1830-0x183f]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x1c48-0x1c4f]
pci 0000:00:1f.2: reg 0x14: [io 0x1c1c-0x1c1f]
pci 0000:00:1f.2: reg 0x18: [io 0x1c40-0x1c47]
pci 0000:00:1f.2: reg 0x1c: [io 0x1c18-0x1c1b]
pci 0000:00:1f.2: reg 0x20: [io 0x1c20-0x1c3f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfe226000-0xfe2267ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfe227400-0xfe2274ff]
pci 0000:00:1f.3: reg 0x20: [io 0x1c60-0x1c7f]
pci 0000:01:00.0: [10de:040c] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd6000000-0xd6ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd4000000-0xd5ffffff 64bit]
pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xd4000000-0xd6ffffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfdffffff]
pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref]
pci 0000:03:00.0: [8086:4230] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xdf2fe000-0xdf2fffff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.1: bridge window [mem 0xdc100000-0xdf2fffff]
pci 0000:00:1c.1: bridge window [mem 0xdfd00000-0xdfdfffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.2: bridge window [mem 0xd8000000-0xd9ffffff]
pci 0000:00:1c.2: bridge window [mem 0xdfa00000-0xdfafffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd1ffffff]
pci 0000:00:1c.3: bridge window [mem 0xdf700000-0xdf7fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
pci 0000:00:1c.4: bridge window [io 0x7000-0x7fff]
pci 0000:00:1c.4: bridge window [mem 0xcc000000-0xcdffffff]
pci 0000:00:1c.4: bridge window [mem 0xdf400000-0xdf4fffff 64bit pref]
pci 0000:15:00.0: [1180:0476] type 02 class 0x060700
pci 0000:15:00.0: proprietary Ricoh MMC controller disabled (via cardbus function)
pci 0000:15:00.0: MMC cards are now supported by standard SDHCI controller
pci 0000:15:00.0: reg 0x10: [mem 0xf8100000-0xf8100fff]
pci 0000:15:00.0: supports D1 D2
pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.2: [1180:0822] type 00 class 0x080500
pci 0000:15:00.2: reg 0x10: [mem 0xf8101000-0xf81010ff]
pci 0000:15:00.2: supports D1 D2
pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.4: [1180:0592] type 00 class 0x088000
pci 0000:15:00.4: reg 0x10: [mem 0xf8101800-0xf81018ff]
pci 0000:15:00.4: supports D1 D2
pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.5: [1180:0852] type 00 class 0x088000
pci 0000:15:00.5: reg 0x10: [mem 0xf8101c00-0xf8101cff]
pci 0000:15:00.5: supports D1 D2
pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x8000-0xbfff]
pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xfbffffff]
pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed4bfff window] (subtractive decode)
pci_bus 0000:16: busn_res: can not insert [bus 16-ff] under [bus 15-18] (conflicts with (null) [bus 15-18])
pci_bus 0000:16: busn_res: [bus 16-ff] end is updated to 17
ACPI: Enabled 3 GPEs in block 00 to 1F
ACPI : EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbfeb0000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: [io 0x1000-0x107f] could not be reserved
system 00:01: [io 0x1180-0x11bf] has been reserved
system 00:01: [io 0x0800-0x080f] has been reserved
system 00:01: [io 0x15e0-0x15ef] has been reserved
system 00:01: [io 0x1600-0x165f] could not be reserved
system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active)
pnp 00:05: Plug and Play ACPI device, IDs ATM1200 PNP0c31 (active)
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1f.0: BAR 13: [io size 0x0080] has bogus alignment
pci 0000:01:00.0: BAR 6: no space for [mem size 0x00020000 pref]
pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00020000 pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xd4000000-0xd6ffffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfdffffff]
pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.1: bridge window [mem 0xdc100000-0xdf2fffff]
pci 0000:00:1c.1: bridge window [mem 0xdfd00000-0xdfdfffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.2: bridge window [mem 0xd8000000-0xd9ffffff]
pci 0000:00:1c.2: bridge window [mem 0xdfa00000-0xdfafffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd1ffffff]
pci 0000:00:1c.3: bridge window [mem 0xdf700000-0xdf7fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
pci 0000:00:1c.4: bridge window [io 0x7000-0x7fff]
pci 0000:00:1c.4: bridge window [mem 0xcc000000-0xcdffffff]
pci 0000:00:1c.4: bridge window [mem 0xdf400000-0xdf4fffff 64bit pref]
pci 0000:15:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
pci 0000:15:00.0: res[15]=[mem 0x04000000-0x07ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
pci 0000:15:00.0: res[16]=[mem 0x04000000-0x03ffffff] res_to_dev_res add_size 4000000 min_align 4000000
pci 0000:15:00.0: res[16]=[mem 0x04000000-0x07ffffff] res_to_dev_res add_size 4000000 min_align 4000000
pci 0000:15:00.0: res[13]=[io 0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
pci 0000:15:00.0: res[13]=[io 0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100
pci 0000:15:00.0: res[14]=[io 0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
pci 0000:15:00.0: res[14]=[io 0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100
pci 0000:15:00.0: BAR 15: assigned [mem 0xf4000000-0xf7ffffff pref]
pci 0000:15:00.0: BAR 16: assigned [mem 0xc0000000-0xc3ffffff]
pci 0000:15:00.0: BAR 13: assigned [io 0x8000-0x80ff]
pci 0000:15:00.0: BAR 14: assigned [io 0x8400-0x84ff]
pci 0000:15:00.0: CardBus bridge to [bus 16-17]
pci 0000:15:00.0: bridge window [io 0x8000-0x80ff]
pci 0000:15:00.0: bridge window [io 0x8400-0x84ff]
pci 0000:15:00.0: bridge window [mem 0xf4000000-0xf7ffffff pref]
pci 0000:15:00.0: bridge window [mem 0xc0000000-0xc3ffffff]
pci 0000:00:1e.0: PCI bridge to [bus 15-18]
pci 0000:00:1e.0: bridge window [io 0x8000-0xbfff]
pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xfbffffff]
pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff window]
pci_bus 0000:00: resource 11 [mem 0xfed40000-0xfed4bfff window]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xd4000000-0xd6ffffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xfc000000-0xfdffffff]
pci_bus 0000:02: resource 2 [mem 0xf8000000-0xf80fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:03: resource 1 [mem 0xdc100000-0xdf2fffff]
pci_bus 0000:03: resource 2 [mem 0xdfd00000-0xdfdfffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:04: resource 1 [mem 0xd8000000-0xd9ffffff]
pci_bus 0000:04: resource 2 [mem 0xdfa00000-0xdfafffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:05: resource 1 [mem 0xd0000000-0xd1ffffff]
pci_bus 0000:05: resource 2 [mem 0xdf700000-0xdf7fffff 64bit pref]
pci_bus 0000:0d: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:0d: resource 1 [mem 0xcc000000-0xcdffffff]
pci_bus 0000:0d: resource 2 [mem 0xdf400000-0xdf4fffff 64bit pref]
pci_bus 0000:15: resource 0 [io 0x8000-0xbfff]
pci_bus 0000:15: resource 1 [mem 0xf8100000-0xfbffffff]
pci_bus 0000:15: resource 2 [mem 0xf4000000-0xf7ffffff 64bit pref]
pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:15: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:15: resource 7 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:15: resource 8 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:15: resource 9 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:15: resource 10 [mem 0xc0000000-0xfebfffff window]
pci_bus 0000:15: resource 11 [mem 0xfed40000-0xfed4bfff window]
pci_bus 0000:16: resource 0 [io 0x8000-0x80ff]
pci_bus 0000:16: resource 1 [io 0x8400-0x84ff]
pci_bus 0000:16: resource 2 [mem 0xf4000000-0xf7ffffff pref]
pci_bus 0000:16: resource 3 [mem 0xc0000000-0xc3ffffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS mismatch (64 != 32), using 64 bytes
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 30196K (ffff8800344f6000 - ffff880036273000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbbeb0000-0xbfeb0000] (64MB) mapped at [ffff8800bbeb0000-ffff8800bfeaffff]
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa27e630c9, max_idle_ns: 440795310689 ns
microcode: CPU0 sig=0x6fb, pf=0x80, revision=0xba
microcode: CPU1 sig=0x6fb, pf=0x80, revision=0xba
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 512 (order: 3, 32768 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1457891934.792:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:01.0:pcie04: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ LLActRep-
pciehp 0000:00:01.0:pcie04: service driver pciehp loaded
pciehp 0000:00:1c.0:pcie04: Slot #2 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
pciehp 0000:00:1c.1:pcie04: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
pciehp 0000:00:1c.2:pcie04: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
pciehp 0000:00:1c.3:pcie04: Slot #5 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
pciehp 0000:00:1c.4:pcie04: Slot #2 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 15
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (61 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [THM1] (61 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
ACPI: Battery Slot [BAT0] (battery present)
tpm_tis 00:05: 1.2 TPM (device-id 0x3203, rev-id 9)
tpm_tis 00:05: TPM is disabled/deactivated (0x6)
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1830 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1838 irq 15
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ata2: port disabled--ignoring
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 22, io mem 0xfe226c00
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.2.0-25-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 19, io mem 0xfe227000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.2.0-25-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 4.2.0-25-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 4.2.0-25-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 4.2.0-25-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 4.2.0-25-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 4.2.0-25-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: f6be44a295e4a73f564775c4f2ef9a79f3e358d6'
registered taskstats version 1
zswap: loading zswap
zswap: using zbud pool
zswap: using lzo compressor
Key type trusted registered
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
tpm_tis 00:05: A TPM error (6) occurred attempting to read a pcr value
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 8:204:997
rtc_cmos 00:02: setting system clock to 2016-03-13 17:58:56 UTC (1457891936)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-U10N, 1.05, max UDMA/33
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-U10N 1.05 PQ: 0 ANSI: 5
sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
Freeing unused kernel memory: 1464K (ffffffff81d38000 - ffffffff81ea6000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 248K (ffff8800017c2000 - ffff880001800000)
Freeing unused kernel memory: 284K (ffff880001bb9000 - ffff880001c00000)
systemd-udevd[111]: starting version 204
ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
acpi device:06: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input5
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.5-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21)
pci 0000:00:1e.0: enabling device (0005 -> 0007)
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: No vmmc regulator found
sdhci-pci 0000:15:00.2: No vqmmc regulator found
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA
usb 3-1: new full-speed USB device number 2 using uhci_hcd
usb 6-2: new full-speed USB device number 2 using uhci_hcd
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:25:20:b9:60
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 6, PHY: 6, PBA No: FFFFFF-0FF
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
ata3: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 31
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226200 irq 31
usb 3-1: New USB device found, idVendor=0a5c, idProduct=2110
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: BCM2045B
usb 3-1: Manufacturer: Broadcom Corp
usb 6-2: New USB device found, idVendor=17ef, idProduct=1003
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2: Product: Integrated Smart Card Reader
usb 6-2: Manufacturer: Lenovo
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ATA-8: WDC WD3200BPVT-00JJ5T0, 01.01A01, max UDMA/133
ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD3200BPVT-0 1A01 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 2:0:0:0: [sda] 4096-byte physical blocks
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000/0x0/0x0, board id: 0, fw id: 67352
psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 2:0:0:0: [sda] Attached SCSI disk
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
usb 3-2: new full-speed USB device number 3 using uhci_hcd
usb 3-2: New USB device found, idVendor=0483, idProduct=2016
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: Biometric Coprocessor
usb 3-2: Manufacturer: STMicroelectronics
random: nonblocking pool is initialized
floppy0: no floppy controllers found
work still pending
raid6: sse2x1 gen() 3947 MB/s
raid6: sse2x1 xor() 3974 MB/s
raid6: sse2x2 gen() 4636 MB/s
raid6: sse2x2 xor() 4833 MB/s
raid6: sse2x4 gen() 6989 MB/s
raid6: sse2x4 xor() 5480 MB/s
raid6: using algorithm sse2x4 gen() 6989 MB/s
raid6: .... xor() 5480 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 9365.000 MB/sec
generic_sse: 8488.000 MB/sec
xor: using function: prefetch64-sse (9365.000 MB/sec)
Btrfs loaded
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
Adding 5354492k swap on /dev/sda2. Priority:-1 extents:1 across:5354492k FS
systemd-udevd[369]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[drm] Initialized drm 1.1.0 20060810
wmi: Mapper loaded
Non-volatile memory driver v1.3
thinkpad_acpi: ThinkPad ACPI Extras v0.25
thinkpad_acpi:
thinkpad_acpi: ThinkPad BIOS 7LETD0WW (2.30 ), EC 7KHT24WW-1.08
thinkpad_acpi: Lenovo ThinkPad T61p, model 6457AN9
thinkpad_acpi: detected a 16-level brightness capable ThinkPad
thinkpad_acpi: ACPI backlight control delay disabled
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000107F (\_SB_.PCI0.LPC_.PMIO) (20150619/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011BF (\_SB_.PCI0.LPC_.LPIO) (20150619/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011BF (\_SB_.PCI0.LPC_.LPIO) (20150619/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
iwl4965: Copyright(c) 2003-2011 Intel Corporation
iwl4965 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
iwl4965 0000:03:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
iwl4965 0000:03:00.0: device EEPROM VER=0x36, CALIB=0x5
iwl4965 0000:03:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
snd_hda_intel 0000:00:1b.0: probe_mask set to 0x1 for device 17aa:20ac
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
yenta_cardbus 0000:15:00.0: Socket status: 30000006
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x8000-0xbfff]
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf8100000-0xfbffffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xf8100000-0xfbffffff:
excluding 0xf8100000-0xf84effff
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf4000000-0xf7ffffff 64bit pref]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4000000-0xf7ffffff:
excluding 0xf4000000-0xf7ffffff
r592: driver successfully loaded
r852: driver loaded successfully
device-mapper: multipath: version 1.9.0 loaded
iwl4965 0000:03:00.0: loaded firmware version 228.61.2.24
ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs'
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.96 Sun Nov 8 22:33:28 PST 2015
snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1984: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_analog hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_analog hdaudioC0D0: hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
snd_hda_codec_analog hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_analog hdaudioC0D0: dig-out=0x1b/0x0
snd_hda_codec_analog hdaudioC0D0: inputs:
snd_hda_codec_analog hdaudioC0D0: Internal Mic=0x15
snd_hda_codec_analog hdaudioC0D0: Mic=0x14
snd_hda_codec_analog hdaudioC0D0: Dock Mic=0x1c
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
excluding 0xc0000-0xd3fff 0xe0000-0xfffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
excluding 0xa0000000-0xa0ffffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
excluding 0x60000000-0x60ffffff
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
floppy0: no floppy controllers found
work still pending
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
init: failsafe main process (789) killed by TERM signal
usb 3-1: USB disconnect, device number 2
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: cups main process (1254) killed by HUP signal
init: cups main process ended, respawning
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
init: samba-ad-dc main process (1287) terminated with status 1
wlan0: authenticate with 00:0e:8f:31:87:13
wlan0: send auth to 00:0e:8f:31:87:13 (try 1/3)
wlan0: authenticated
wlan0: associate with 00:0e:8f:31:87:13 (try 1/3)
wlan0: RX AssocResp from 00:0e:8f:31:87:13 (capab=0x411 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Regulatory domain changed to country: DE
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm), (0 s)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
wlan0: deauthenticating from 00:0e:8f:31:87:13 by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
wlan0: authenticate with 00:0e:8f:31:87:13
wlan0: send auth to 00:0e:8f:31:87:13 (try 1/3)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: authenticated
wlan0: associate with 00:0e:8f:31:87:13 (try 1/3)
wlan0: RX AssocResp from 00:0e:8f:31:87:13 (capab=0x411 status=0 aid=3)
wlan0: associated
cfg80211: Regulatory domain changed to country: DE
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm), (0 s)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net ffffffff81ceca00)
vboxdrv: Found 2 processor cores
vboxdrv: fAsync=1 offMin=0x144b9c offMax=0x144b9c
vboxdrv: TSC mode is Asynchronous, tentative frequency 2194498934 Hz
vboxdrv: Successfully loaded version 5.0.4_LinuxMint (interface 0x00240000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1908) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-stop pre-start process (1929) terminated with status 1
Monitor-Mwait will be used to enter C-3 state
perf interrupt took too long (2517 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
CE: hpet increased min_delta_ns to 20115 nsec
perf interrupt took too long (5024 > 5000), lowering kernel.perf_event_max_sample_rate to 25000