dmesg - ac-advantech-uno-2473g-motherboard
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.2.0-27-generic (buildd@lcy01-23) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #32~14.04.1-Ubuntu SMP Fri Jan 22 15:32:26 UTC 2016 (Ubuntu 4.2.0-27.32~14.04.1-generic 4.2.8-ckt1)
Command line: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable
BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] ACPI NVS
BIOS-e820: [mem 0x0000000000040000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable
BIOS-e820: [mem 0x000000001f000000-0x000000001f0fffff] reserved
BIOS-e820: [mem 0x000000001f100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
BIOS-e820: [mem 0x0000000020100000-0x00000000b9312fff] usable
BIOS-e820: [mem 0x00000000b9313000-0x00000000b9342fff] reserved
BIOS-e820: [mem 0x00000000b9343000-0x00000000b9353fff] ACPI data
BIOS-e820: [mem 0x00000000b9354000-0x00000000b98aefff] ACPI NVS
BIOS-e820: [mem 0x00000000b98af000-0x00000000b9b31fff] reserved
BIOS-e820: [mem 0x00000000b9b32000-0x00000000b9b7efff] type 20
BIOS-e820: [mem 0x00000000b9b7f000-0x00000000b9b7ffff] usable
BIOS-e820: [mem 0x00000000b9b80000-0x00000000b9bc1fff] reserved
BIOS-e820: [mem 0x00000000b9bc2000-0x00000000b9d30fff] usable
BIOS-e820: [mem 0x00000000b9d31000-0x00000000b9ff9fff] reserved
BIOS-e820: [mem 0x00000000b9ffa000-0x00000000b9ffffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
BIOS-e820: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000feffffff] reserved
BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ACPI=0xb9347000 ACPI 2.0=0xb9347000 ESRT=0xb9b2e098 SMBIOS=0xf0560 MPS=0xfd5c0
esrt: Reserving ESRT space from 0x00000000b9b2e098 to 0x00000000b9b2e0d0.
SMBIOS 2.8 present.
DMI: Advantech UNO-2473G-E3AE/UNO-2473G-E3AE, BIOS 5.6.5 09/24/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0BA800000 mask FFF800000 uncachable
3 base 0BB000000 mask FFF000000 uncachable
4 base 0BC000000 mask FFC000000 uncachable
5 base 100000000 mask FC0000000 write-back
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 2984MB, range: 8MB, type UC
reg 3, base: 2992MB, range: 16MB, type UC
reg 4, base: 3008MB, range: 64MB, type UC
reg 5, base: 4GB, range: 1GB, type WB
total RAM covered: 4008M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 2984MB, range: 8MB, type UC
reg 3, base: 2992MB, range: 16MB, type UC
reg 4, base: 3008MB, range: 64MB, type UC
reg 5, base: 4GB, range: 1GB, type WB
e820: update [mem 0xba800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xba000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd820-0x000fd82f] mapped at [ffff8800000fd820]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x02ff3000, 0x02ff3fff] PGTABLE
BRK [0x02ff4000, 0x02ff4fff] PGTABLE
BRK [0x02ff5000, 0x02ff5fff] PGTABLE
init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[mem 0x13fe00000-0x13fffffff] page 2M
BRK [0x02ff6000, 0x02ff6fff] PGTABLE
init_memory_mapping: [mem 0x120000000-0x13fdfffff]
[mem 0x120000000-0x13fdfffff] page 2M
init_memory_mapping: [mem 0x00100000-0x1effffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x1effffff] page 2M
init_memory_mapping: [mem 0x1f100000-0x1fffffff]
[mem 0x1f100000-0x1f1fffff] page 4k
[mem 0x1f200000-0x1fffffff] page 2M
BRK [0x02ff7000, 0x02ff7fff] PGTABLE
init_memory_mapping: [mem 0x20100000-0xb9312fff]
[mem 0x20100000-0x201fffff] page 4k
[mem 0x20200000-0xb91fffff] page 2M
[mem 0xb9200000-0xb9312fff] page 4k
BRK [0x02ff8000, 0x02ff8fff] PGTABLE
init_memory_mapping: [mem 0xb9b7f000-0xb9b7ffff]
[mem 0xb9b7f000-0xb9b7ffff] page 4k
init_memory_mapping: [mem 0xb9bc2000-0xb9d30fff]
[mem 0xb9bc2000-0xb9d30fff] page 4k
init_memory_mapping: [mem 0xb9ffa000-0xb9ffffff]
[mem 0xb9ffa000-0xb9ffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x11fffffff]
[mem 0x100000000-0x11fffffff] page 2M
RAMDISK: [mem 0x35592000-0x36ac0fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000B9347000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000B9347078 000074 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000B9352BD0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20150619/tbfadt-623)
ACPI: DSDT 0x00000000B9347180 00BA4B (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000B98AEF80 000040
ACPI: APIC 0x00000000B9352CE0 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000B9352D68 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: LPIT 0x00000000B9352DB0 000104 (v01 ALASKA A M I 00000003 VLV2 0100000D)
ACPI: MCFG 0x00000000B9352EB8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000B9352EF8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000B9352F30 000763 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: SSDT 0x00000000B9353698 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
ACPI: SSDT 0x00000000B9353928 00017A (v01 PmRef ApTst 00003000 INTL 20061109)
ACPI: UEFI 0x00000000B9353AA8 000042 (v01 ALASKA A M I 00000000 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
NODE_DATA(0) allocated [mem 0x13fff5000-0x13fff9fff]
[ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000013fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000003efff]
node 0: [mem 0x0000000000040000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x000000001effffff]
node 0: [mem 0x000000001f100000-0x000000001fffffff]
node 0: [mem 0x0000000020100000-0x00000000b9312fff]
node 0: [mem 0x00000000b9b7f000-0x00000000b9b7ffff]
node 0: [mem 0x00000000b9bc2000-0x00000000b9d30fff]
node 0: [mem 0x00000000b9ffa000-0x00000000b9ffffff]
node 0: [mem 0x0000000100000000-0x000000013fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
On node 0 totalpages: 1020455
DMA zone: 64 pages used for memmap
DMA zone: 26 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 11787 pages used for memmap
DMA32 zone: 754313 pages, LIFO batch:31
Normal zone: 4096 pages used for memmap
Normal zone: 262144 pages, LIFO batch:31
x86/hpet: Will disable the HPET for this platform because it's not reliable
Reserving Intel graphics stolen memory at 0xbb000000-0xbeffffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-86
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0003f000-0x0003ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x1f000000-0x1f0fffff]
PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
PM: Registered nosave memory: [mem 0xb9313000-0xb9342fff]
PM: Registered nosave memory: [mem 0xb9343000-0xb9353fff]
PM: Registered nosave memory: [mem 0xb9354000-0xb98aefff]
PM: Registered nosave memory: [mem 0xb98af000-0xb9b31fff]
PM: Registered nosave memory: [mem 0xb9b32000-0xb9b7efff]
PM: Registered nosave memory: [mem 0xb9b80000-0xb9bc1fff]
PM: Registered nosave memory: [mem 0xb9d31000-0xb9ff9fff]
PM: Registered nosave memory: [mem 0xba000000-0xbaffffff]
PM: Registered nosave memory: [mem 0xbb000000-0xbeffffff]
PM: Registered nosave memory: [mem 0xbf000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
PM: Registered nosave memory: [mem 0xfed02000-0xfed02fff]
PM: Registered nosave memory: [mem 0xfed03000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed07fff]
PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
PM: Registered nosave memory: [mem 0xfed09000-0xfed0bfff]
PM: Registered nosave memory: [mem 0xfed0c000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1cfff]
PM: Registered nosave memory: [mem 0xfed1d000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffafffff]
PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
e820: [mem 0xbf000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88013fc00000 s96728 r8192 d30248 u524288
pcpu-alloc: s96728 r8192 d30248 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1004482
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3861884K/4081820K available (7940K kernel code, 1243K rwdata, 3816K rodata, 1468K init, 1292K bss, 219936K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:1024 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
Console: colour dummy device 80x25
console [tty0] enabled
Maximum core-clock to bus-clock ratio: 0x17
Resolved frequency ID: 0, frequency: 83200 KHz
TSC runs at 1913600 KHz
lapic_timer_frequency = 332800
tsc: Detected 1913.600 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3827.20 BogoMIPS (lpj=7654400)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff81ea7000 - ffffffff81eae000)
ftrace: allocating 30981 entries in 122 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Atom(TM) CPU E3845 @ 1.91GHz (fam: 06, model: 37, stepping: 09)
Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000ffffffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (15308.80 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x0003f000-0x0003ffff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xb9354000-0xb98aefff] (5615616 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 22:34:35, date: 03/07/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [USBC] (on)
ACPI: Power Resource [PLPE] (on)
ACPI: Power Resource [PLPE] (on)
ACPI: Power Resource [CLK0] (on)
ACPI: Power Resource [CLK1] (on)
ACPI: Power Resource [FN00] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xd0f15ffe window]
pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
pci 0000:00:02.0: reg 0x20: [io 0xe080-0xe087]
pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
pci 0000:00:13.0: reg 0x10: [io 0xe070-0xe077]
pci 0000:00:13.0: reg 0x14: [io 0xe060-0xe063]
pci 0000:00:13.0: reg 0x18: [io 0xe050-0xe057]
pci 0000:00:13.0: reg 0x1c: [io 0xe040-0xe043]
pci 0000:00:13.0: reg 0x20: [io 0xe020-0xe03f]
pci 0000:00:13.0: reg 0x24: [mem 0xd0f15000-0xd0f157ff]
pci 0000:00:13.0: PME# supported from D3hot
pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xd0f00000-0xd0f0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
pci 0000:00:1a.0: reg 0x10: [mem 0xd0500000-0xd05fffff]
pci 0000:00:1a.0: reg 0x14: [mem 0xd0400000-0xd04fffff]
pci 0000:00:1a.0: PME# supported from D0 D3hot
pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xd0f10000-0xd0f13fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xd0f14000-0xd0f1401f]
pci 0000:00:1f.3: reg 0x20: [io 0xe000-0xe01f]
pci 0000:01:00.0: [10b5:8606] type 01 class 0x060400
pci 0000:01:00.0: reg 0x10: [mem 0xd0e00000-0xd0e1ffff]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01-06]
pci 0000:00:1c.0: bridge window [io 0xa000-0xbfff]
pci 0000:00:1c.0: bridge window [mem 0xd0c00000-0xd0efffff]
pci 0000:02:01.0: [10b5:8606] type 01 class 0x060400
pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
pci 0000:02:05.0: [10b5:8606] type 01 class 0x060400
pci 0000:02:05.0: PME# supported from D0 D3hot D3cold
pci 0000:02:07.0: [10b5:8606] type 01 class 0x060400
pci 0000:02:07.0: PME# supported from D0 D3hot D3cold
pci 0000:02:09.0: [10b5:8606] type 01 class 0x060400
pci 0000:02:09.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PCI bridge to [bus 02-06]
pci 0000:01:00.0: bridge window [io 0xa000-0xbfff]
pci 0000:01:00.0: bridge window [mem 0xd0c00000-0xd0dfffff]
pci 0000:03:00.0: [8086:1533] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xd0d00000-0xd0d7ffff]
pci 0000:03:00.0: reg 0x18: [io 0xb000-0xb01f]
pci 0000:03:00.0: reg 0x1c: [mem 0xd0d80000-0xd0d83fff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:02:01.0: PCI bridge to [bus 03]
pci 0000:02:01.0: bridge window [io 0xb000-0xbfff]
pci 0000:02:01.0: bridge window [mem 0xd0d00000-0xd0dfffff]
pci 0000:04:00.0: [8086:1533] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [mem 0xd0c00000-0xd0c7ffff]
pci 0000:04:00.0: reg 0x18: [io 0xa000-0xa01f]
pci 0000:04:00.0: reg 0x1c: [mem 0xd0c80000-0xd0c83fff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:02:05.0: PCI bridge to [bus 04]
pci 0000:02:05.0: bridge window [io 0xa000-0xafff]
pci 0000:02:05.0: bridge window [mem 0xd0c00000-0xd0cfffff]
pci 0000:02:07.0: PCI bridge to [bus 05]
pci 0000:02:09.0: PCI bridge to [bus 06]
pci 0000:07:00.0: [8086:1533] type 00 class 0x020000
pci 0000:07:00.0: reg 0x10: [mem 0xd0a00000-0xd0afffff]
pci 0000:07:00.0: reg 0x18: [io 0xd000-0xd01f]
pci 0000:07:00.0: reg 0x1c: [mem 0xd0b00000-0xd0b03fff]
pci 0000:07:00.0: reg 0x30: [mem 0xd0900000-0xd09fffff pref]
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:07:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 07]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xd0900000-0xd0bfffff]
pci 0000:00:1c.2: PCI bridge to [bus 08]
pci 0000:09:00.0: [8086:1533] type 00 class 0x020000
pci 0000:09:00.0: reg 0x10: [mem 0xd0700000-0xd07fffff]
pci 0000:09:00.0: reg 0x18: [io 0xc000-0xc01f]
pci 0000:09:00.0: reg 0x1c: [mem 0xd0800000-0xd0803fff]
pci 0000:09:00.0: reg 0x30: [mem 0xd0600000-0xd06fffff pref]
pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
pci 0000:09:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 09]
pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.3: bridge window [mem 0xd0600000-0xd08fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 5 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff]
e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff]
e820: reserve RAM buffer [mem 0xb9313000-0xbbffffff]
e820: reserve RAM buffer [mem 0xb9b80000-0xbbffffff]
e820: reserve RAM buffer [mem 0xb9d31000-0xbbffffff]
e820: reserve RAM buffer [mem 0xba000000-0xbbffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
clocksource: Switched to clocksource refined-jiffies
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0x0400-0x047f] has been reserved
system 00:01: [io 0x0500-0x05fe] has been reserved
system 00:01: [io 0x0600-0x061f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0a00-0x0a2f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
system 00:07: [mem 0xfed01000-0xfed01fff] has been reserved
system 00:07: [mem 0xfed03000-0xfed03fff] has been reserved
system 00:07: [mem 0xfed04000-0xfed04fff] has been reserved
system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:07: [mem 0xfed1c000-0xfed1cfff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xfef00000-0xfeffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
clocksource: Switched to clocksource acpi_pm
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01-06] add_size 200000 add_align 100000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000 add_align 100000
pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000 add_align 100000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 08] add_size 200000 add_align 100000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000 add_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.2: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:00:1c.2: BAR 14: no space for [mem size 0x00200000]
pci 0000:00:1c.2: BAR 14: failed to assign [mem size 0x00200000]
pci 0000:00:1c.2: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:00:1c.3: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:00:1c.3: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:00:1c.2: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:1c.3: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:00:1c.3: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:00:1c.2: BAR 14: no space for [mem size 0x00200000]
pci 0000:00:1c.2: BAR 14: failed to assign [mem size 0x00200000]
pci 0000:00:1c.2: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:02:01.0: PCI bridge to [bus 03]
pci 0000:02:01.0: bridge window [io 0xb000-0xbfff]
pci 0000:02:01.0: bridge window [mem 0xd0d00000-0xd0dfffff]
pci 0000:02:05.0: PCI bridge to [bus 04]
pci 0000:02:05.0: bridge window [io 0xa000-0xafff]
pci 0000:02:05.0: bridge window [mem 0xd0c00000-0xd0cfffff]
pci 0000:02:07.0: PCI bridge to [bus 05]
pci 0000:02:09.0: PCI bridge to [bus 06]
pci 0000:01:00.0: PCI bridge to [bus 02-06]
pci 0000:01:00.0: bridge window [io 0xa000-0xbfff]
pci 0000:01:00.0: bridge window [mem 0xd0c00000-0xd0dfffff]
pci 0000:00:1c.0: PCI bridge to [bus 01-06]
pci 0000:00:1c.0: bridge window [io 0xa000-0xbfff]
pci 0000:00:1c.0: bridge window [mem 0xd0c00000-0xd0efffff]
pci 0000:00:1c.1: PCI bridge to [bus 07]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xd0900000-0xd0bfffff]
pci 0000:00:1c.2: PCI bridge to [bus 08]
pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.3: PCI bridge to [bus 09]
pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.3: bridge window [mem 0xd0600000-0xd08fffff]
pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
pci_bus 0000:00: resource 11 [mem 0xc0000000-0xd0f15ffe window]
pci_bus 0000:01: resource 0 [io 0xa000-0xbfff]
pci_bus 0000:01: resource 1 [mem 0xd0c00000-0xd0efffff]
pci_bus 0000:02: resource 0 [io 0xa000-0xbfff]
pci_bus 0000:02: resource 1 [mem 0xd0c00000-0xd0dfffff]
pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xd0d00000-0xd0dfffff]
pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
pci_bus 0000:04: resource 1 [mem 0xd0c00000-0xd0cfffff]
pci_bus 0000:07: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:07: resource 1 [mem 0xd0900000-0xd0bfffff]
pci_bus 0000:08: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:09: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:09: resource 1 [mem 0xd0600000-0xd08fffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 21692K (ffff880035592000 - ffff880036ac1000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb20e3000-0xb60e3000] (64MB) mapped at [ffff8800b20e3000-ffff8800b60e2fff]
microcode: CPU0 sig=0x30679, pf=0x1, revision=0x901
microcode: CPU1 sig=0x30679, pf=0x1, revision=0x901
microcode: CPU2 sig=0x30679, pf=0x1, revision=0x901
microcode: CPU3 sig=0x30679, pf=0x1, revision=0x901
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1457390083.807:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, mapped to 0xffffc90000800000, using 1216k, total 1216k
efifb: mode is 640x480x32, linelength=2560, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 80x30
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x3000020
intel_idle: v0.4 model 0x37
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (27 C)
GHES: HEST is not enabled!
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
00:05: ttyS2 at I/O 0x3e8 (irq = 10, base_baud = 115200) is a 16550A
00:06: ttyS3 at I/O 0x2e8 (irq = 5, base_baud = 115200) is a 16550A
hpet: number irqs doesn't agree with number of timers
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.2.0-27-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.2.0-27-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
efivars: duplicate variable: PCI_COMMON-aca9f304-21e2-4852-9875-7ff4881d67a5
PCCT header not found.
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 736e2f9ea1b4728a15ac169b1869267e1128d6e8'
registered taskstats version 1
zswap: loading zswap
zswap: using zbud pool
zswap: using lzo compressor
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 8:869:602
rtc_cmos 00:00: setting system clock to 2016-03-07 22:34:44 UTC (1457390084)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1468K (ffffffff81d38000 - ffffffff81ea7000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 240K (ffff8800027c4000 - ffff880002800000)
Freeing unused kernel memory: 280K (ffff880002bba000 - ffff880002c00000)
systemd-udevd[119]: starting version 204
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
ahci 0000:00:13.0: version 3.0
ahci 0000:00:13.0: controller can't do DEVSLP, turning off
ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x2 impl SATA mode
ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso
PTP clock support registered
dca service started, version 1.12.1
[drm] Initialized drm 1.1.0 20060810
scsi host0: ahci
scsi host1: ahci
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.18-k
igb: Copyright (c) 2007-2014 Intel Corporation.
ata1: DUMMY
ata2: SATA max UDMA/133 abar m2048@0xd0f15000 port 0xd0f15180 irq 93
pps pps0: new PPS source ptp0
igb 0000:03:00.0: added PHC on eth0
igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:03:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 74:fe:48:2d:41:d4
igb 0000:03:00.0: eth0: PBA No: 000300-000
igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[drm] Memory usable by graphics device = 2048M
checking generic (c0000000 130000) vs hw (c0000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
pps pps1: new PPS source ptp1
igb 0000:04:00.0: added PHC on eth1
igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:04:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 74:fe:48:2d:41:d5
igb 0000:04:00.0: eth1: PBA No: 000300-000
igb 0000:04:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
pps pps2: new PPS source ptp2
igb 0000:07:00.0: added PHC on eth2
igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:07:00.0: eth2: (PCIe:2.5Gb/s:Width x1) 00:0b:ab:a6:81:5d
igb 0000:07:00.0: eth2: PBA No: 000200-000
igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
usb 1-3: new high-speed USB device number 2 using xhci_hcd
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:09: registered as cooling_device5
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 0
pps pps3: new PPS source ptp3
igb 0000:09:00.0: added PHC on eth3
igb 0000:09:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:09:00.0: eth3: (PCIe:2.5Gb/s:Width x1) 00:0b:ab:a6:81:5c
igb 0000:09:00.0: eth3: PBA No: 000200-000
igb 0000:09:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
fbcon: inteldrmfb (fb0) is primary device
usb 1-3: New USB device found, idVendor=0424, idProduct=2514
usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: SQF-SMSM4-32G-S8E, S8FM06A7, max UDMA/133
ata2.00: 62533296 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA SQF-SMSM4-32G-S8 06A7 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 1:0:0:0: [sda] Attached SCSI disk
[drm:intel_dp_start_link_train [i915]] *ERROR* failed to enable link training
[drm:intel_dp_complete_link_train [i915]] *ERROR* failed to start channel equalization
[drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe B FIFO underrun
usb 1-4: new high-speed USB device number 3 using xhci_hcd
usb 1-4: New USB device found, idVendor=0424, idProduct=2514
usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
usb 1-3.1: new high-speed USB device number 4 using xhci_hcd
tsc: Refined TSC clocksource calibration: 1916.666 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x37415710be0, max_idle_ns: 881590555136 ns
Console: switching to colour frame buffer device 160x64
usb 1-3.1: New USB device found, idVendor=0424, idProduct=a700
usb 1-3.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-3.1:1.0: USB hub found
hub 1-3.1:1.0: 4 ports detected
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
usb 1-3.2: new high-speed USB device number 5 using xhci_hcd
usb 1-3.2: New USB device found, idVendor=058f, idProduct=6387
usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3.2: Product: Mass Storage
usb 1-3.2: Manufacturer: Generic
usb 1-3.2: SerialNumber: AE91BA64
usb-storage 1-3.2:1.0: USB Mass Storage device detected
scsi host2: usb-storage 1-3.2:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
usb 1-3.1.3: new low-speed USB device number 6 using xhci_hcd
usb 1-3.1.3: New USB device found, idVendor=413c, idProduct=2003
usb 1-3.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3.1.3: Product: Dell USB Keyboard
usb 1-3.1.3: Manufacturer: Dell
usb 1-3.1.3: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1.3/1-3.1.3:1.0/0003:413C:2003.0001/input/input5
hid-generic 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:14.0-3.1.3/input0
usb 1-3.1.4: new low-speed USB device number 7 using xhci_hcd
usb 1-3.1.4: New USB device found, idVendor=046d, idProduct=c016
usb 1-3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3.1.4: Product: Optical USB Mouse
usb 1-3.1.4: Manufacturer: Logitech
usb 1-3.1.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1.4/1-3.1.4:1.0/0003:046D:C016.0002/input/input6
hid-generic 0003:046D:C016.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:14.0-3.1.4/input0
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
clocksource: Switched to clocksource tsc
scsi 2:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] 7987200 512-byte logical blocks: (4.08 GB/3.80 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 2:0:0:0: [sdb] Attached SCSI removable disk
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
squashfs: version 4.0 (2009/01/31) Phillip Lougher
random: debconf-communi urandom read with 79 bits of entropy available
random: nonblocking pool is initialized
efivars: duplicate variable: PCI_COMMON-aca9f304-21e2-4852-9875-7ff4881d67a5
Adding 4080636k swap on /dev/sda3. Priority:-1 extents:1 across:4080636k SSFS
systemd-udevd[1150]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: cups main process (1247) killed by HUP signal
init: cups main process ended, respawning
snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:hp
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
device-mapper: multipath: version 1.9.0 loaded
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
SSE version of gcm_enc/dec engaged.
intel_soc_dts_thermal: request_threaded_irq ret -22
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
init: failsafe main process (1441) killed by TERM signal
init: alsa-restore main process (1841) terminated with status 99
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (2262) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
igb 0000:09:00.0 eth3: igb: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
usb 1-3.1.3: USB disconnect, device number 6
hub 1-3.1:1.0: hub_port_status failed (err = -71)
usb 1-3.1-port3: connect-debounce failed
usb 1-3.1: USB disconnect, device number 4
usb 1-3.1.4: USB disconnect, device number 7
usb 1-3.1: new high-speed USB device number 8 using xhci_hcd
usb 1-3.1: New USB device found, idVendor=0424, idProduct=a700
usb 1-3.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-3.1:1.0: USB hub found
hub 1-3.1:1.0: 4 ports detected
usb 1-3.1.3: new low-speed USB device number 9 using xhci_hcd
usb 1-3.1.3: New USB device found, idVendor=413c, idProduct=2003
usb 1-3.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3.1.3: Product: Dell USB Keyboard
usb 1-3.1.3: Manufacturer: Dell
usb 1-3.1.3: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1.3/1-3.1.3:1.0/0003:413C:2003.0003/input/input11
hid-generic 0003:413C:2003.0003: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:14.0-3.1.3/input0
usb 1-3.1.4: new low-speed USB device number 10 using xhci_hcd
usb 1-3.1.4: New USB device found, idVendor=046d, idProduct=c016
usb 1-3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3.1.4: Product: Optical USB Mouse
usb 1-3.1.4: Manufacturer: Logitech
usb 1-3.1.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1.4/1-3.1.4:1.0/0003:046D:C016.0004/input/input12
hid-generic 0003:046D:C016.0004: input,hidraw1: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:14.0-3.1.4/input0
usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
usb 2-1: New USB device found, idVendor=0480, idProduct=a200
usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 2-1: Product: External USB 3.0
usb 2-1: Manufacturer: TOSHIBA
usb 2-1: SerialNumber: 20150712006095F
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi host3: usb-storage 2-1:1.0
scsi 3:0:0:0: Direct-Access TOSHIBA External USB 3.0 0 PQ: 0 ANSI: 6
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 3:0:0:0: [sdc] Attached SCSI disk
EXT4-fs (sdc1): recovery complete
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
systemd-hostnamed[18364]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 2-1: USB disconnect, device number 2
blk_update_request: I/O error, dev sdc, sector 0
sd 3:0:0:0: [sdc] Synchronizing SCSI cache
sd 3:0:0:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
Buffer I/O error on dev sdc1, logical block 121667584, lost sync page write
JBD2: Error -5 detected when updating journal superblock for sdc1-8.
Aborting journal on device sdc1-8.
Buffer I/O error on dev sdc1, logical block 121667584, lost sync page write
JBD2: Error -5 detected when updating journal superblock for sdc1-8.
usb 2-1: new SuperSpeed USB device number 3 using xhci_hcd
usb 2-1: New USB device found, idVendor=054c, idProduct=09c2
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: Storage Media
usb 2-1: Manufacturer: Sony
usb 2-1: SerialNumber: 5C07104BF44E15CF00
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi host4: usb-storage 2-1:1.0
scsi 4:0:0:0: Direct-Access Sony Storage Media PMAP PQ: 0 ANSI: 6
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdc] 60698112 512-byte logical blocks: (31.0 GB/28.9 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 4:0:0:0: [sdc] No Caching mode page found
sd 4:0:0:0: [sdc] Assuming drive cache: write through
sdc:
sd 4:0:0:0: [sdc] Attached SCSI removable disk
FAT-fs (sdc): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
systemd-hostnamed[19319]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
perf interrupt took too long (2515 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf interrupt took too long (5008 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
usb 1-3.1: USB disconnect, device number 8
usb 1-3.1.3: USB disconnect, device number 9
usb 1-3.1.4: USB disconnect, device number 10
igb 0000:09:00.0 eth3: igb: eth3 NIC Link is Down
igb 0000:09:00.0 eth3: igb: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
usb 1-2: new high-speed USB device number 11 using xhci_hcd
usb 1-2: New USB device found, idVendor=0424, idProduct=a700
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 1-2.4: new low-speed USB device number 12 using xhci_hcd
usb 1-2.4: New USB device found, idVendor=046d, idProduct=c016
usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.4: Product: Optical USB Mouse
usb 1-2.4: Manufacturer: Logitech
usb 1-2.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.0/0003:046D:C016.0005/input/input13
hid-generic 0003:046D:C016.0005: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:14.0-2.4/input0
usb 1-2.3: new low-speed USB device number 13 using xhci_hcd
usb 1-2.3: New USB device found, idVendor=413c, idProduct=2003
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3: Product: Dell USB Keyboard
usb 1-2.3: Manufacturer: Dell
usb 1-2.3: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:413C:2003.0006/input/input14
hid-generic 0003:413C:2003.0006: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:14.0-2.3/input0
usb 1-2: USB disconnect, device number 11
usb 1-2.3: USB disconnect, device number 13
usb 1-2.4: USB disconnect, device number 12
igb 0000:09:00.0 eth3: igb: eth3 NIC Link is Down
igb 0000:09:00.0 eth3: igb: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
usb 1-2: new high-speed USB device number 14 using xhci_hcd
usb 1-2: New USB device found, idVendor=0424, idProduct=a700
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 1-2.4: new low-speed USB device number 15 using xhci_hcd
usb 1-2.4: New USB device found, idVendor=046d, idProduct=c016
usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.4: Product: Optical USB Mouse
usb 1-2.4: Manufacturer: Logitech
usb 1-2.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.0/0003:046D:C016.0007/input/input15
hid-generic 0003:046D:C016.0007: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:14.0-2.4/input0
usb 1-2.3: new low-speed USB device number 16 using xhci_hcd
usb 1-2.3: New USB device found, idVendor=413c, idProduct=2003
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3: Product: Dell USB Keyboard
usb 1-2.3: Manufacturer: Dell
usb 1-2.3: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:413C:2003.0008/input/input16
hid-generic 0003:413C:2003.0008: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:14.0-2.3/input0
usb 1-2: USB disconnect, device number 14
usb 1-2.3: USB disconnect, device number 16
usb 1-2.4: USB disconnect, device number 15
igb 0000:09:00.0 eth3: igb: eth3 NIC Link is Down
usb 1-2: new high-speed USB device number 17 using xhci_hcd
usb 1-2: New USB device found, idVendor=0424, idProduct=a700
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 1-2.4: new low-speed USB device number 18 using xhci_hcd
usb 1-2.4: New USB device found, idVendor=046d, idProduct=c016
usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.4: Product: Optical USB Mouse
usb 1-2.4: Manufacturer: Logitech
usb 1-2.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.0/0003:046D:C016.0009/input/input17
hid-generic 0003:046D:C016.0009: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:14.0-2.4/input0
usb 1-2.3: new low-speed USB device number 19 using xhci_hcd
usb 1-2.3: New USB device found, idVendor=413c, idProduct=2003
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3: Product: Dell USB Keyboard
usb 1-2.3: Manufacturer: Dell
usb 1-2.3: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:413C:2003.000A/input/input18
hid-generic 0003:413C:2003.000A: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:14.0-2.3/input0
igb 0000:09:00.0 eth3: igb: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
systemd-hostnamed[29754]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 2-1: USB disconnect, device number 3
usb 1-2: USB disconnect, device number 17
usb 1-2.3: USB disconnect, device number 19
usb 1-2.4: USB disconnect, device number 18
igb 0000:09:00.0 eth3: igb: eth3 NIC Link is Down
igb 0000:09:00.0 eth3: igb: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
usb 1-2: new high-speed USB device number 20 using xhci_hcd
usb 1-2: New USB device found, idVendor=0424, idProduct=a700
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 1-2.4: new low-speed USB device number 21 using xhci_hcd
usb 1-2.4: New USB device found, idVendor=046d, idProduct=c016
usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.4: Product: Optical USB Mouse
usb 1-2.4: Manufacturer: Logitech
usb 1-2.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.0/0003:046D:C016.000B/input/input19
hid-generic 0003:046D:C016.000B: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:14.0-2.4/input0
usb 1-2.3: new low-speed USB device number 22 using xhci_hcd
usb 1-2.3: New USB device found, idVendor=413c, idProduct=2003
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3: Product: Dell USB Keyboard
usb 1-2.3: Manufacturer: Dell
usb 1-2.3: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:413C:2003.000C/input/input20
hid-generic 0003:413C:2003.000C: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:14.0-2.3/input0
igb 0000:09:00.0 eth3: igb: eth3 NIC Link is Down
usb 1-2: USB disconnect, device number 20
usb 1-2.3: USB disconnect, device number 22
usb 1-2.4: USB disconnect, device number 21
igb 0000:09:00.0 eth3: igb: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
usb 1-2: new high-speed USB device number 23 using xhci_hcd
usb 1-2: New USB device found, idVendor=0424, idProduct=a700
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 1-2.4: new low-speed USB device number 24 using xhci_hcd
usb 1-2.4: New USB device found, idVendor=046d, idProduct=c016
usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.4: Product: Optical USB Mouse
usb 1-2.4: Manufacturer: Logitech
usb 1-2.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.0/0003:046D:C016.000D/input/input21
hid-generic 0003:046D:C016.000D: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:14.0-2.4/input0
usb 1-2.3: new low-speed USB device number 25 using xhci_hcd
usb 1-2.3: New USB device found, idVendor=413c, idProduct=2003
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3: Product: Dell USB Keyboard
usb 1-2.3: Manufacturer: Dell
usb 1-2.3: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:413C:2003.000E/input/input22
hid-generic 0003:413C:2003.000E: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:14.0-2.3/input0
igb 0000:09:00.0 eth3: igb: eth3 NIC Link is Down
igb 0000:09:00.0 eth3: igb: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
igb 0000:09:00.0 eth3: igb: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
usb 1-2: USB disconnect, device number 23
usb 1-2.3: USB disconnect, device number 25
usb 1-2.4: USB disconnect, device number 24
igb 0000:09:00.0 eth3: igb: eth3 NIC Link is Down
igb 0000:09:00.0 eth3: igb: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
usb 1-2: new high-speed USB device number 26 using xhci_hcd
usb 1-2: New USB device found, idVendor=0424, idProduct=a700
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 1-2.4: new low-speed USB device number 27 using xhci_hcd
usb 1-2.4: New USB device found, idVendor=046d, idProduct=c016
usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.4: Product: Optical USB Mouse
usb 1-2.4: Manufacturer: Logitech
usb 1-2.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.0/0003:046D:C016.000F/input/input23
hid-generic 0003:046D:C016.000F: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:14.0-2.4/input0
usb 1-2.3: new low-speed USB device number 28 using xhci_hcd
usb 1-2.3: New USB device found, idVendor=413c, idProduct=2003
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3: Product: Dell USB Keyboard
usb 1-2.3: Manufacturer: Dell
usb 1-2.3: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:413C:2003.0010/input/input24
hid-generic 0003:413C:2003.0010: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:14.0-2.3/input0
usb 1-2: USB disconnect, device number 26
usb 1-2.3: USB disconnect, device number 28
usb 1-2.4: USB disconnect, device number 27
igb 0000:09:00.0 eth3: igb: eth3 NIC Link is Down
usb 1-1: new high-speed USB device number 29 using xhci_hcd
usb 1-1: New USB device found, idVendor=0424, idProduct=a700
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-1.4: new low-speed USB device number 30 using xhci_hcd
usb 1-1.4: New USB device found, idVendor=046d, idProduct=c016
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.4: Product: Optical USB Mouse
usb 1-1.4: Manufacturer: Logitech
usb 1-1.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C016.0011/input/input25
hid-generic 0003:046D:C016.0011: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:14.0-1.4/input0
usb 1-1.3: new low-speed USB device number 31 using xhci_hcd
usb 1-1.3: New USB device found, idVendor=413c, idProduct=2003
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.3: Product: Dell USB Keyboard
usb 1-1.3: Manufacturer: Dell
usb 1-1.3: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:413C:2003.0012/input/input26
hid-generic 0003:413C:2003.0012: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:14.0-1.3/input0
igb 0000:09:00.0 eth3: igb: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
igb 0000:09:00.0 eth3: igb: eth3 NIC Link is Down
usb 1-1: USB disconnect, device number 29
usb 1-1.3: USB disconnect, device number 31
usb 1-1.4: USB disconnect, device number 30
usb 1-2: new high-speed USB device number 32 using xhci_hcd
usb 1-2: New USB device found, idVendor=0424, idProduct=a700
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 1-2.4: new low-speed USB device number 33 using xhci_hcd
usb 1-2.4: New USB device found, idVendor=046d, idProduct=c016
usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.4: Product: Optical USB Mouse
usb 1-2.4: Manufacturer: Logitech
usb 1-2.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.0/0003:046D:C016.0013/input/input27
hid-generic 0003:046D:C016.0013: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:14.0-2.4/input0
usb 1-2.3: new low-speed USB device number 34 using xhci_hcd
usb 1-2.3: New USB device found, idVendor=413c, idProduct=2003
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3: Product: Dell USB Keyboard
usb 1-2.3: Manufacturer: Dell
usb 1-2.3: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:413C:2003.0014/input/input28
hid-generic 0003:413C:2003.0014: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:14.0-2.3/input0
igb 0000:09:00.0 eth3: igb: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
usb 1-2: USB disconnect, device number 32
usb 1-2.3: USB disconnect, device number 34
usb 1-2.4: USB disconnect, device number 33
usb 1-2: new high-speed USB device number 35 using xhci_hcd
usb 1-2: New USB device found, idVendor=0424, idProduct=a700
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 1-2.4: new low-speed USB device number 36 using xhci_hcd
usb 1-2.4: New USB device found, idVendor=046d, idProduct=c016
usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.4: Product: Optical USB Mouse
usb 1-2.4: Manufacturer: Logitech
usb 1-2.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.0/0003:046D:C016.0015/input/input29
hid-generic 0003:046D:C016.0015: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:14.0-2.4/input0
usb 1-2.3: new low-speed USB device number 37 using xhci_hcd
usb 1-2.3: New USB device found, idVendor=413c, idProduct=2003
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3: Product: Dell USB Keyboard
usb 1-2.3: Manufacturer: Dell
usb 1-2.3: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:413C:2003.0016/input/input30
hid-generic 0003:413C:2003.0016: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:14.0-2.3/input0
igb 0000:09:00.0 eth3: igb: eth3 NIC Link is Down
usb 1-2: USB disconnect, device number 35
usb 1-2.3: USB disconnect, device number 37
usb 1-2.4: USB disconnect, device number 36
usb 1-2: new high-speed USB device number 38 using xhci_hcd
usb 1-2: New USB device found, idVendor=0424, idProduct=a700
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 1-2.4: new low-speed USB device number 39 using xhci_hcd
usb 1-2.4: New USB device found, idVendor=046d, idProduct=c016
usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.4: Product: Optical USB Mouse
usb 1-2.4: Manufacturer: Logitech
usb 1-2.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.0/0003:046D:C016.0017/input/input31
hid-generic 0003:046D:C016.0017: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:14.0-2.4/input0
usb 1-2.3: new low-speed USB device number 40 using xhci_hcd
usb 1-2.3: New USB device found, idVendor=413c, idProduct=2003
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3: Product: Dell USB Keyboard
usb 1-2.3: Manufacturer: Dell
usb 1-2.3: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:413C:2003.0018/input/input32
hid-generic 0003:413C:2003.0018: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:14.0-2.3/input0
usb 1-2: USB disconnect, device number 38
usb 1-2.3: USB disconnect, device number 40
usb 1-2.4: USB disconnect, device number 39