dmesg - 01
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.1-2-ARCH (builduser@foutrelis) (gcc version 5.3.0 (GCC) ) #1 SMP PREEMPT Wed Feb 3 13:12:33 UTC 2016
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000954effff] usable
BIOS-e820: [mem 0x00000000954f0000-0x0000000095deffff] reserved
BIOS-e820: [mem 0x0000000095df0000-0x000000009c6befff] usable
BIOS-e820: [mem 0x000000009c6bf000-0x000000009cebefff] reserved
BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS
BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x93813018-0x93823057] usable ==> usable
e820: update [mem 0x95df1018-0x95df9e57] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000006efff] usable
reserve setup_data: [mem 0x000000000006f000-0x000000000006ffff] reserved
reserve setup_data: [mem 0x0000000000070000-0x0000000000087fff] usable
reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000093813017] usable
reserve setup_data: [mem 0x0000000093813018-0x0000000093823057] usable
reserve setup_data: [mem 0x0000000093823058-0x00000000954effff] usable
reserve setup_data: [mem 0x00000000954f0000-0x0000000095deffff] reserved
reserve setup_data: [mem 0x0000000095df0000-0x0000000095df1017] usable
reserve setup_data: [mem 0x0000000095df1018-0x0000000095df9e57] usable
reserve setup_data: [mem 0x0000000095df9e58-0x000000009c6befff] usable
reserve setup_data: [mem 0x000000009c6bf000-0x000000009cebefff] reserved
reserve setup_data: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS
reserve setup_data: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
reserve setup_data: [mem 0x000000009cfff000-0x000000009cffffff] usable
reserve setup_data: [mem 0x000000009d000000-0x000000009f9fffff] reserved
reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
reserve setup_data: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
reserve setup_data: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000025f5fffff] usable
efi: EFI v2.31 by INSYDE Corp.
efi: ESRT=0x9ca1f218 ACPI=0x9cffe000 ACPI 2.0=0x9cffe014 SMBIOS=0x9cebef98
esrt: Reserving ESRT space from 0x000000009ca1f218 to 0x000000009ca1f250.
SMBIOS 2.8 present.
DMI: Acer Aspire V3-572G/EA50_HB , BIOS V1.31 08/03/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x25f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-combining
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7C00000000 write-back
1 base 009D000000 mask 7FFF000000 uncachable
2 base 009E000000 mask 7FFE000000 uncachable
3 base 00A0000000 mask 7FE0000000 uncachable
4 base 00C0000000 mask 7FC0000000 uncachable
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000082000] 82000 size 24576
Using GB pages for direct mapping
BRK [0x01b3f000, 0x01b3ffff] PGTABLE
BRK [0x01b40000, 0x01b40fff] PGTABLE
BRK [0x01b41000, 0x01b41fff] PGTABLE
BRK [0x01b42000, 0x01b42fff] PGTABLE
BRK [0x01b43000, 0x01b43fff] PGTABLE
BRK [0x01b44000, 0x01b44fff] PGTABLE
RAMDISK: [mem 0x7fc76000-0x7fffffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000009CFFE014 000024 (v02 ACRSYS)
ACPI: XSDT 0x000000009CFFE210 0000BC (v01 ACRSYS ACRPRDCT 00000001 01000013)
ACPI: FACP 0x000000009CFF8000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: DSDT 0x000000009CFE4000 010C73 (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
ACPI: FACS 0x000000009CFB9000 000040
ACPI: UEFI 0x000000009CFFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: FPDT 0x000000009CFFB000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: MSDM 0x000000009CFFA000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: ASF! 0x000000009CFF9000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: HPET 0x000000009CFF7000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: APIC 0x000000009CFF6000 00008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: MCFG 0x000000009CFF5000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 0x000000009CFE1000 002028 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
ACPI: BOOT 0x000000009CFDF000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: LPIT 0x000000009CFDE000 000094 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
ACPI: ASPT 0x000000009CFDC000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: DBGP 0x000000009CFDB000 000034 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 0x000000009CFDA000 000539 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: SSDT 0x000000009CFD9000 000AD8 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: SSDT 0x000000009CFD5000 003B8C (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: SSDT 0x000000009CFD0000 002CFB (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
ACPI: CSRT 0x000000009CFD3000 0000C4 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: BGRT 0x000000009CFD4000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000025f5fffff]
NODE_DATA(0) allocated [mem 0x25f5f9000-0x25f5fcfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000025f5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000006efff]
node 0: [mem 0x0000000000070000-0x0000000000087fff]
node 0: [mem 0x0000000000100000-0x00000000954effff]
node 0: [mem 0x0000000095df0000-0x000000009c6befff]
node 0: [mem 0x000000009cfff000-0x000000009cffffff]
node 0: [mem 0x0000000100000000-0x000000025f5fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000025f5fffff]
On node 0 totalpages: 2077510
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3974 pages, LIFO batch:0
DMA32 zone: 9911 pages used for memmap
DMA32 zone: 634304 pages, LIFO batch:31
Normal zone: 22488 pages used for memmap
Normal zone: 1439232 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0x9da00000-0x9f9fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
PM: Registered nosave memory: [mem 0x93813000-0x93813fff]
PM: Registered nosave memory: [mem 0x93823000-0x93823fff]
PM: Registered nosave memory: [mem 0x954f0000-0x95deffff]
PM: Registered nosave memory: [mem 0x95df1000-0x95df1fff]
PM: Registered nosave memory: [mem 0x95df9000-0x95df9fff]
PM: Registered nosave memory: [mem 0x9c6bf000-0x9cebefff]
PM: Registered nosave memory: [mem 0x9cebf000-0x9cfbefff]
PM: Registered nosave memory: [mem 0x9cfbf000-0x9cffefff]
PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff]
PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff]
PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff]
PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 32 pages/cpu @ffff88025f200000 s92696 r8192 d30184 u262144
pcpu-alloc: s92696 r8192 d30184 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2045026
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8020964K/8310040K available (5721K kernel code, 945K rwdata, 1820K rodata, 1188K init, 1156K bss, 289076K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:8448 nr_irqs:760 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2394.431 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.39 BogoMIPS (lpj=7981436)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 6 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 20K (ffffffff81a17000 - ffffffff81a1c000)
ftrace: allocating 22852 entries in 90 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz (family: 0x6, model: 0x45, stepping: 0x1)
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (19163.59 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 19:28:30, date: 02/24/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
Simple Boot Flag at 0x44 set to 0x1
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 2 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880255552000 000465 (v01 PmRef Cpu0Cst 00003001 INTL 20131115)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880255552800 0005AA (v01 PmRef ApIst 00003000 INTL 20131115)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88025555B000 000119 (v01 PmRef ApCst 00003000 INTL 20131115)
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [NVP3] (on)
ACPI: Power Resource [NVP2] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xb3000000-0xb33fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xb3610000-0xb3613fff 64bit]
pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xb3600000-0xb360ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xb3618000-0xb361801f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xb3614000-0xb3617fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:9c14] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xb361c000-0xb361c3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f]
pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097]
pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087]
pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093]
pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
pci 0000:00:1f.2: reg 0x24: [mem 0xb361b000-0xb361b7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xb3619000-0xb36190ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x5040-0x505f]
pci 0000:01:00.0: [10ec:5287] type 00 class 0xff0000
pci 0000:01:00.0: reg 0x10: [mem 0xb3505000-0xb3505fff]
pci 0000:01:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.1: reg 0x10: [io 0x4000-0x40ff]
pci 0000:01:00.1: reg 0x18: [mem 0xb3504000-0xb3504fff 64bit]
pci 0000:01:00.1: reg 0x20: [mem 0xb3500000-0xb3503fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.0: bridge window [mem 0xb3500000-0xb35fffff]
pci 0000:02:00.0: [168c:0034] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xb3400000-0xb347ffff 64bit]
pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [mem 0xb3400000-0xb34fffff]
pci 0000:03:00.0: [10de:1341] type 00 class 0x030200
pci 0000:03:00.0: reg 0x10: [mem 0xb2000000-0xb2ffffff]
pci 0000:03:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:03:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
pci 0000:03:00.0: reg 0x24: [io 0x3000-0x307f]
pci 0000:03:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xb2000000-0xb2ffffff]
pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 4 GPEs in block 00 to 7F
ACPI : EC: GPE = 0x27, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
e820: reserve RAM buffer [mem 0x93813018-0x93ffffff]
e820: reserve RAM buffer [mem 0x954f0000-0x97ffffff]
e820: reserve RAM buffer [mem 0x95df1018-0x97ffffff]
e820: reserve RAM buffer [mem 0x9c6bf000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0xfd60-0xfd63] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x1800-0x18fe] could not be reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x1854-0x1857] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:04: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:04: [mem 0xff000000-0xff000fff] has been reserved
system 00:04: [mem 0xff010000-0xffffffff] could not be reserved
system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:04: [mem 0x9fa20000-0x9fa20fff] has been reserved
system 00:04: [mem 0x9fa10000-0x9fa1ffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0xb361f000-0xb361ffff] has been reserved
system 00:05: [mem 0xb361d000-0xb361dfff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:01:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
pci 0000:03:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
pci 0000:01:00.0: BAR 6: assigned [mem 0xb3510000-0xb351ffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.0: bridge window [mem 0xb3500000-0xb35fffff]
pci 0000:02:00.0: BAR 6: assigned [mem 0xb3480000-0xb348ffff pref]
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [mem 0xb3400000-0xb34fffff]
pci 0000:03:00.0: BAR 6: no space for [mem size 0x00080000 pref]
pci 0000:03:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xb2000000-0xb2ffffff]
pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:01: resource 1 [mem 0xb3500000-0xb35fffff]
pci_bus 0000:02: resource 1 [mem 0xb3400000-0xb34fffff]
pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xb2000000-0xb2ffffff]
pci_bus 0000:03: resource 2 [mem 0xa0000000-0xb1ffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 3624K (ffff88007fc76000 - ffff880080000000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x8ee00000-0x92e00000] (64MB) mapped at [ffff88008ee00000-ffff880092dfffff]
RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
hw unit of domain pp0-core 2^-14 Joules
hw unit of domain package 2^-14 Joules
hw unit of domain dram 2^-14 Joules
hw unit of domain pp1-gpu 2^-14 Joules
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Key type big_key registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, mapped to 0xffffc90001000000, using 8100k, total 8100k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x67
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4 model 0x45
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
Linux agpgart interface v0.103
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Magic number: 4:720:496
rtc_cmos 00:01: setting system clock to 2016-02-24 19:28:30 UTC (1456342110)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1188K (ffffffff818ee000 - ffffffff81a17000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 412K (ffff880001599000 - ffff880001600000)
Freeing unused kernel memory: 228K (ffff8800017c7000 - ffff880001800000)
random: systemd-tmpfile urandom read with 3 bits of entropy available
i8042: PNP: PS/2 Controller [PNP0303:KBC0] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
serio: i8042 KBD port at 0x60,0x64 irq 1
rtsx_pci 0000:01:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 43
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xb361c000
libata version 3.00 loaded.
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 9 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xb361b000 port 0xb361b100 irq 45
ata2: SATA max UDMA/133 abar m2048@0xb361b000 port 0xb361b180 irq 45
ata3: DUMMY
ata4: DUMMY
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: WDC WD10JPVX-22JC3T0, 01.01A01, max UDMA/133
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD10JPVX-22J 1A01 PQ: 0 ANSI: 5
usb 2-2: new low-speed USB device number 2 using xhci_hcd
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 8 ports detected
usb 2-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 2-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:1C4F:0002.0001/input/input1
hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:14.0-2/input0
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.1/0003:1C4F:0002.0002/input/input2
hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:14.0-2/input1
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-10: INTEL SSDSC2BW120H6, RG21, max UDMA/133
ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA INTEL SSDSC2BW12 RG21 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 2-3: new low-speed USB device number 3 using xhci_hcd
sda: sda1 sda2 sda3 sda4 sda5 sda7 sda9
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: HID 04b4:0033 as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/0003:04B4:0033.0003/input/input3
hid-generic 0003:04B4:0033.0003: input,hidraw2: USB HID v1.00 Mouse [HID 04b4:0033] on usb-0000:00:14.0-3/input0
tsc: Refined TSC clocksource calibration: 2394.457 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283c360c9e, max_idle_ns: 440795302742 ns
usb 2-5: new full-speed USB device number 4 using xhci_hcd
usb 2-5: string descriptor 0 read error: -22
usb 2-7: new high-speed USB device number 5 using xhci_hcd
clocksource: Switched to clocksource tsc
random: nonblocking pool is initialized
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Swap.
systemd[1]: Listening on Journal Socket.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Mounting Debug File System...
systemd[1]: Mounting Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting Journal Service...
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Set Up Additional Binary Formats...
systemd[1]: Reached target Slices.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Created slice system-getty.slice.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Reached target Login Prompts.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Reached target Paths.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Configuration File System.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 166 (systemd-binfmt)
EXT4-fs (sdb2): re-mounted. Opts: data=ordered
systemd[1]: Started Remount Root and Kernel File Systems.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Mounting Arbitrary Executable File Formats File System...
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Load/Save Random Seed.
systemd[1]: Mounted Arbitrary Executable File Formats File System.
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
systemd[1]: Mounting /tmp...
systemd[1]: home-tomas-.cache.mount: Directory /home/tomas/.cache to mount over is not empty, mounting anyway.
systemd[1]: Mounting /home/tomas/.cache...
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Mounted /tmp.
systemd[1]: Mounted /home/tomas/.cache.
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Journal Service.
systemd-journald[164]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input4
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input5
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input6
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
ACPI: Power Button [PWRF]
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[drm] Initialized drm 1.1.0 20060810
ACPI: AC Adapter [ACAD] (off-line)
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC283: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Mic=0x12
wmi: Mapper loaded
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.1: can't disable ASPM; OS doesn't have ASPM control
[drm] Memory usable by graphics device = 2048M
checking generic (c0000000 7e9000) vs hw (c0000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
r8169 0000:01:00.1 eth0: RTL8411 at 0xffffc90000cd0000, f8:a9:63:e5:1b:66, XID 1c800800 IRQ 48
r8169 0000:01:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
ACPI: Battery Slot [BAT1] (battery present)
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
input: PC Speaker as /devices/platform/pcspkr/input/input9
[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.RP05.PEGP.DD02._BCL] (Node ffff8802568ebb40), AE_NOT_FOUND (20150930/psparse-542)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:38/LNXVIDEO:00/input/input10
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
ACPI Warning: \_SB_.PCI0.GFX0._DSM:
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
Argument #4 type mismatch - Found [Buffer], ACPI requires [Package]
(20150930/nsarguments-95)
i915 0000:00:02.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input11
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
pci 0000:03:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.RP05.PEGP handle
nouveau 0000:03:00.0: enabling device (0006 -> 0007)
nouveau 0000:03:00.0: unknown chipset (118010a2)
nouveau: probe of 0000:03:00.0 failed with error -12
ath: phy0: ASPM enabled: 0x42
ath: EEPROM regdomain: 0x6c
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x6c
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90001300000, irq=19
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
intel_rapl: RAPL package 0 domain package locked by BIOS
input: SYN1B7E:01 06CB:2970 Touchpad as /devices/pci0000:00/INT33C3:00/i2c-0/i2c-SYN1B7E:01/0018:06CB:2970.0004/input/input12
hid-multitouch 0018:06CB:2970.0004: input,hidraw3: I2C HID v1.00 Mouse [SYN1B7E:01 06CB:2970] on i2c-SYN1B7E:01
acer_wmi: Acer Laptop ACPI-WMI Extras
acer_wmi: Function bitmap for Communication Button: 0x801
acer_wmi: Enabling Launch Manager failed: 0xe2 - 0x0
input: Acer WMI hotkeys as /devices/virtual/input/input14
input: Acer BMA150 accelerometer as /devices/virtual/input/input15
r8169 0000:01:00.1 enp1s0f1: renamed from eth0
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Non-volatile memory driver v1.3
ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
mousedev: PS/2 mouse device common for all mice
cfg80211: Regulatory domain changed to country: CZ
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2301 mBm), (N/A)
cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
fbcon: inteldrmfb (fb0) is primary device
ahci 0000:00:1f.2: port does not support device sleep
media: Linux media interface: v0.10
Linux video capture interface: v2.00
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
usbcore: registered new interface driver ath3k
uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b455)
input: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input16
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
Console: switching to colour frame buffer device 240x67
ACPI Warning: SystemIO range 0x0000000000005040-0x000000000000505F conflicts with OpRegion 0x0000000000005040-0x000000000000504F (\_SB_.PCI0.SBUS.SMBI) (20150930/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
raid6: sse2x1 gen() 7473 MB/s
raid6: sse2x1 xor() 5899 MB/s
raid6: sse2x2 gen() 9587 MB/s
raid6: sse2x2 xor() 6430 MB/s
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
raid6: sse2x4 gen() 10900 MB/s
raid6: sse2x4 xor() 7539 MB/s
raid6: avx2x1 gen() 14601 MB/s
raid6: avx2x2 gen() 16795 MB/s
raid6: avx2x4 gen() 19819 MB/s
raid6: using algorithm avx2x4 gen() 19819 MB/s
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 23990.400 MB/sec
Btrfs loaded
BTRFS: device label main devid 1 transid 48304 /dev/sda7
BTRFS: device label main devid 2 transid 48304 /dev/sda9
BTRFS info (device sda9): disk space caching is enabled
BTRFS: has skinny extents
r8169 0000:01:00.1 enp1s0f1: rtl_counters_cond == 1 (loop: 1000, delay: 10).
r8169 0000:01:00.1 enp1s0f1: rtl_counters_cond == 1 (loop: 1000, delay: 10).
r8169 0000:01:00.1 enp1s0f1: rtl_counters_cond == 1 (loop: 1000, delay: 10).
IPv6: ADDRCONF(NETDEV_UP): enp1s0f1: link is not ready
r8169 0000:01:00.1 enp1s0f1: link down
r8169 0000:01:00.1 enp1s0f1: link down
IPv6: ADDRCONF(NETDEV_UP): enp1s0f1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
r8169 0000:01:00.1 enp1s0f1: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0f1: link becomes ready
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
device virbr1-nic entered promiscuous mode
virbr1: port 1(virbr1-nic) entered listening state
virbr1: port 1(virbr1-nic) entered listening state
IPv6: ADDRCONF(NETDEV_UP): virbr1: link is not ready
virbr1: port 1(virbr1-nic) entered disabled state
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with 00:1f:1f:ff:b5:24
wlp2s0: send auth to 00:1f:1f:ff:b5:24 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with 00:1f:1f:ff:b5:24 (try 1/3)
wlp2s0: RX AssocResp from 00:1f:1f:ff:b5:24 (capab=0x411 status=0 aid=4)
wlp2s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
ahci 0000:00:1f.2: port does not support device sleep
ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen
ata1.00: irq_stat 0x00400000, PHY RDY changed
ata1: SError: { PHYRdyChg CommWake }
ata1.00: failed command: CHECK POWER MODE
ata1.00: cmd e5/00:00:00:00:00/00:00:00:00:00/00 tag 27
res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1: hard resetting link
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
wlp2s0: deauthenticating from 00:1f:1f:ff:b5:24 by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
cfg80211: Regulatory domain changed to country: CZ
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2301 mBm), (N/A)
cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.004 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
sd 1:0:0:0: [sdb] Stopping disk
PM: suspend of devices complete after 580.550 msecs
PM: late suspend of devices complete after 23.329 msecs
pcieport 0000:00:1c.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 13.587 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
mce: [Hardware Error]: Machine check events logged
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:01: Turning OFF
acpi LNXPOWER:00: Turning OFF
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 119.432 msecs
PM: early resume of devices complete after 5.451 msecs
pcieport 0000:00:1c.0: System wakeup disabled by ACPI
ath: phy0: ASPM enabled: 0x42
rtc_cmos 00:01: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
sd 1:0:0:0: [sdb] Starting disk
pci 0000:03:00.0: Refused to change power state, currently in D3
r8169 0000:01:00.1 enp1s0f1: link down
xhci_hcd 0000:00:14.0: port 2 resume PLC timeout
usb 2-5: reset full-speed USB device number 4 using xhci_hcd
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/133
ahci 0000:00:1f.2: port does not support device sleep
usb 2-5: device firmware changed
usb 2-7: reset high-speed USB device number 5 using xhci_hcd
PM: resume of devices complete after 862.262 msecs
PM: Finishing wakeup.
Restarting tasks ...
usb 2-2: USB disconnect, device number 2
done.
pci_bus 0000:01: Allocating resources
pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
pci_bus 0000:02: Allocating resources
pcieport 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pcieport 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pci_bus 0000:03: Allocating resources
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pcieport 0000:00:1c.3: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pcieport 0000:00:1c.0: BAR 15: assigned [mem 0x9fb00000-0x9fcfffff 64bit pref]
pcieport 0000:00:1c.3: BAR 15: assigned [mem 0x9fd00000-0x9fefffff 64bit pref]
pcieport 0000:00:1c.3: BAR 13: assigned [io 0x2000-0x2fff]
pci_bus 0000:01: Allocating resources
pci_bus 0000:02: Allocating resources
pci_bus 0000:03: Allocating resources
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
acpi device:2f: Cannot transition to power state D3hot for parent in (unknown)
pci_bus 0000:01: Allocating resources
pci_bus 0000:02: Allocating resources
pci_bus 0000:03: Allocating resources
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
acpi device:2f: Cannot transition to power state D3hot for parent in (unknown)
pci_bus 0000:01: Allocating resources
pci_bus 0000:02: Allocating resources
pci_bus 0000:03: Allocating resources
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
usb 2-3: USB disconnect, device number 3
usb 2-5: USB disconnect, device number 4
IPv6: ADDRCONF(NETDEV_UP): enp1s0f1: link is not ready
r8169 0000:01:00.1 enp1s0f1: link down
IPv6: ADDRCONF(NETDEV_UP): enp1s0f1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
usb 2-5: new full-speed USB device number 6 using xhci_hcd
usb 2-5: string descriptor 0 read error: -22
usb 2-5: USB disconnect, device number 6
usb 2-5: new full-speed USB device number 7 using xhci_hcd
usb 2-5: string descriptor 0 read error: -22
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: configured for UDMA/133
wlp2s0: authenticate with 00:1f:1f:ff:b5:24
wlp2s0: send auth to 00:1f:1f:ff:b5:24 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with 00:1f:1f:ff:b5:24 (try 1/3)
wlp2s0: RX AssocResp from 00:1f:1f:ff:b5:24 (capab=0x411 status=0 aid=4)
wlp2s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
acer_wmi: Unknown function number - 4 - 0
acer_wmi: Unknown function number - 4 - 0
acer_wmi: Unknown function number - 4 - 0
acer_wmi: Unknown function number - 4 - 0