dmesg - nvidia-352

Return To nvidia-352 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-6-generic (buildd@lgw01-21) (gcc version 5.3.1 20160211 (Ubuntu 5.3.1-8ubuntu3) ) #21-Ubuntu SMP Tue Feb 16 20:32:27 UTC 2016 (Ubuntu 4.4.0-6.21-generic 4.4.1)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
tseg: 00cdf00000
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cd82ffff] usable
BIOS-e820: [mem 0x00000000cd830000-0x00000000cd882fff] ACPI NVS
BIOS-e820: [mem 0x00000000cd883000-0x00000000cd88cfff] ACPI data
BIOS-e820: [mem 0x00000000cd88d000-0x00000000cd88dfff] ACPI NVS
BIOS-e820: [mem 0x00000000cd88e000-0x00000000cdad8fff] reserved
BIOS-e820: [mem 0x00000000cdad9000-0x00000000cdae9fff] ACPI NVS
BIOS-e820: [mem 0x00000000cdaea000-0x00000000cdafefff] reserved
BIOS-e820: [mem 0x00000000cdaff000-0x00000000cdb00fff] ACPI NVS
BIOS-e820: [mem 0x00000000cdb01000-0x00000000cdb09fff] reserved
BIOS-e820: [mem 0x00000000cdb0a000-0x00000000cdb0ffff] ACPI NVS
BIOS-e820: [mem 0x00000000cdb10000-0x00000000cdb71fff] reserved
BIOS-e820: [mem 0x00000000cdb72000-0x00000000cdd74fff] ACPI NVS
BIOS-e820: [mem 0x00000000cdd75000-0x00000000cdefffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000042effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: To be filled by O.E.M. To be filled by O.E.M./M5A97 EVO, BIOS 1604 10/16/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x42f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF write-through
  C0000-CDFFF write-protect
  CE000-EBFFF uncachable
  EC000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000C0000000 mask FFFFF0000000 write-back
  3 base 0000CDF00000 mask FFFFFFF00000 uncachable
  4 base 0000CE000000 mask FFFFFE000000 uncachable
  5 disabled
  6 disabled
  7 disabled
TOM2: 000000042f000000 aka 17136M
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3295MB, range: 1MB, type UC
reg 4, base: 3296MB, range: 32MB, type UC
total RAM covered: 3295M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 64M 	num_reg: 5  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3295MB, range: 1MB, type UC
reg 4, base: 3296MB, range: 32MB, type UC
e820: update [mem 0xcdf00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcdf00 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
BRK [0x021fc000, 0x021fcfff] PGTABLE
BRK [0x021fd000, 0x021fdfff] PGTABLE
BRK [0x021fe000, 0x021fefff] PGTABLE
BRK [0x021ff000, 0x021fffff] PGTABLE
BRK [0x02200000, 0x02200fff] PGTABLE
BRK [0x02201000, 0x02201fff] PGTABLE
RAMDISK: [mem 0x33cce000-0x35e5efff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000CD883070 000054 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x00000000CD88AE08 0000F4 (v04 ALASKA A M I    01072009 AMI  00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150930/tbfadt-654)
ACPI: DSDT 0x00000000CD883158 007CA9 (v02 ALASKA A M I    00000000 INTL 20051117)
ACPI: FACS 0x00000000CDB0AF80 000040
ACPI: APIC 0x00000000CD88AF00 00009E (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: MCFG 0x00000000CD88AFA0 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
ACPI: HPET 0x00000000CD88AFE0 000038 (v01 ALASKA A M I    01072009 AMI  00000004)
ACPI: SSDT 0x00000000CD88B140 001714 (v01 AMD    POWERNOW 00000001 AMD  00000001)
ACPI: IVRS 0x00000000CD88B070 0000D0 (v01 AMD    RD890S   00202031 AMD  00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000042effffff]
NODE_DATA(0) allocated [mem 0x42eff7000-0x42effbfff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000042effffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009cfff]
  node   0: [mem 0x0000000000100000-0x00000000cd82ffff]
  node   0: [mem 0x00000000cdd75000-0x00000000cdefffff]
  node   0: [mem 0x0000000100001000-0x000000042effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000042effffff]
On node 0 totalpages: 4180310
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3996 pages, LIFO batch:0
  DMA32 zone: 13095 pages used for memmap
  DMA32 zone: 838075 pages, LIFO batch:31
  Normal zone: 52160 pages used for memmap
  Normal zone: 3338239 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcd830000-0xcd882fff]
PM: Registered nosave memory: [mem 0xcd883000-0xcd88cfff]
PM: Registered nosave memory: [mem 0xcd88d000-0xcd88dfff]
PM: Registered nosave memory: [mem 0xcd88e000-0xcdad8fff]
PM: Registered nosave memory: [mem 0xcdad9000-0xcdae9fff]
PM: Registered nosave memory: [mem 0xcdaea000-0xcdafefff]
PM: Registered nosave memory: [mem 0xcdaff000-0xcdb00fff]
PM: Registered nosave memory: [mem 0xcdb01000-0xcdb09fff]
PM: Registered nosave memory: [mem 0xcdb0a000-0xcdb0ffff]
PM: Registered nosave memory: [mem 0xcdb10000-0xcdb71fff]
PM: Registered nosave memory: [mem 0xcdb72000-0xcdd74fff]
PM: Registered nosave memory: [mem 0xcdf00000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
e820: [mem 0xcdf00000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88042ec00000 s97496 r8192 d29480 u262144
pcpu-alloc: s97496 r8192 d29480 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 4114970
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0xf8000000-0xfbffffff] (64MB)
Memory: 16338804K/16721240K available (8287K kernel code, 1274K rwdata, 3912K rodata, 1472K init, 1292K bss, 382436K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 64.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:1032 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3110.283 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.56 BogoMIPS (lpj=12441132)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff820b0000 - ffffffff820b7000)
ftrace: allocating 31751 entries in 125 pages
[Firmware Bug]: AMD-Vi: IOAPIC[9] not in IVRS table
[Firmware Bug]: AMD-Vi: IOAPIC[10] not in IVRS table
[Firmware Bug]: AMD-Vi: No southbridge IOAPIC found
AMD-Vi: Disabling interrupt remapping
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD FX(tm)-8120 Eight-Core Processor (family: 0x15, model: 0x1, stepping: 0x2)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      6
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (49764.52 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xcd830000-0xcd882fff] (339968 bytes)
PM: Registering ACPI NVS region [mem 0xcd88d000-0xcd88dfff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xcdad9000-0xcdae9fff] (69632 bytes)
PM: Registering ACPI NVS region [mem 0xcdaff000-0xcdb00fff] (8192 bytes)
PM: Registering ACPI NVS region [mem 0xcdb0a000-0xcdb0ffff] (24576 bytes)
PM: Registering ACPI NVS region [mem 0xcdb72000-0xcdd74fff] (2109440 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 21:41:21, date: 02/24/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 2 blocks of module-level executable AML code
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: System wakeup disabled by ACPI
pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [1002:5a1b] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io  0xf040-0xf047]
pci 0000:00:11.0: reg 0x14: [io  0xf030-0xf033]
pci 0000:00:11.0: reg 0x18: [io  0xf020-0xf027]
pci 0000:00:11.0: reg 0x1c: [io  0xf010-0xf013]
pci 0000:00:11.0: reg 0x20: [io  0xf000-0xf00f]
pci 0000:00:11.0: reg 0x24: [mem 0xfe50b000-0xfe50b3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfe50a000-0xfe50afff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfe509000-0xfe5090ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfe508000-0xfe508fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfe507000-0xfe5070ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfe500000-0xfe503fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfe506000-0xfe506fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfe505000-0xfe505fff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfe504000-0xfe5040ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:00.0: [10de:1200] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfc000000-0xfdffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd8000000-0xdbffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
pci 0000:01:00.1: [10de:0e0c] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xfc000000-0xfe0fffff]
pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdbffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io  0xd000-0xd0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xdc104000-0xdc104fff 64bit pref]
pci 0000:02:00.0: reg 0x20: [mem 0xdc100000-0xdc103fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:04.0:   bridge window [mem 0xdc100000-0xdc1fffff 64bit pref]
pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xfe400000-0xfe407fff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:00:05.0: PCI bridge to [bus 03]
pci 0000:00:05.0:   bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:04:00.0: [197b:2362] type 00 class 0x010185
pci 0000:04:00.0: reg 0x10: [io  0xc040-0xc047]
pci 0000:04:00.0: reg 0x14: [io  0xc030-0xc033]
pci 0000:04:00.0: reg 0x18: [io  0xc020-0xc027]
pci 0000:04:00.0: reg 0x1c: [io  0xc010-0xc013]
pci 0000:04:00.0: reg 0x20: [io  0xc000-0xc00f]
pci 0000:04:00.0: reg 0x24: [mem 0xfe310000-0xfe3101ff]
pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:04:00.0: PME# supported from D3hot
pci 0000:00:06.0: PCI bridge to [bus 04]
pci 0000:00:06.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:06.0:   bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:05:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:05:00.0: reg 0x10: [mem 0xfe200000-0xfe207fff 64bit]
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:00:07.0: PCI bridge to [bus 05]
pci 0000:00:07.0:   bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:06:07.0: [1106:3044] type 00 class 0x0c0010
pci 0000:06:07.0: reg 0x10: [mem 0xfe100000-0xfe1007ff]
pci 0000:06:07.0: reg 0x14: [io  0xb000-0xb07f]
pci 0000:06:07.0: supports D2
pci 0000:06:07.0: PME# supported from D2 D3hot D3cold
pci 0000:00:14.4: PCI bridge to [bus 06] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
pci 0000:00:14.4:   bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:00:14.4:   bridge window [io  0x0000-0x03af window] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xffffffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xcd830000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcdf00000-0xcfffffff]
e820: reserve RAM buffer [mem 0x42f000000-0x42fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io  0x040b] has been reserved
system 00:01: [io  0x04d6] has been reserved
system 00:01: [io  0x0c00-0x0c01] has been reserved
system 00:01: [io  0x0c14] has been reserved
system 00:01: [io  0x0c50-0x0c51] has been reserved
system 00:01: [io  0x0c52] has been reserved
system 00:01: [io  0x0c6c] has been reserved
system 00:01: [io  0x0c6f] has been reserved
system 00:01: [io  0x0cd0-0x0cd1] has been reserved
system 00:01: [io  0x0cd2-0x0cd3] has been reserved
system 00:01: [io  0x0cd4-0x0cd5] has been reserved
system 00:01: [io  0x0cd6-0x0cd7] has been reserved
system 00:01: [io  0x0cd8-0x0cdf] has been reserved
system 00:01: [io  0x0800-0x089f] could not be reserved
system 00:01: [io  0x0b20-0x0b3f] has been reserved
system 00:01: [io  0x0900-0x090f] has been reserved
system 00:01: [io  0x0910-0x091f] has been reserved
system 00:01: [io  0xfe00-0xfefe] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io  0x0290-0x02af] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io  0x04d0-0x04d1] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:07: [mem 0xfeb20000-0xfeb23fff] could not be reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xfc000000-0xfe0fffff]
pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdbffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:04.0:   bridge window [mem 0xdc100000-0xdc1fffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 03]
pci 0000:00:05.0:   bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:04:00.0: BAR 6: assigned [mem 0xfe300000-0xfe30ffff pref]
pci 0000:00:06.0: PCI bridge to [bus 04]
pci 0000:00:06.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:06.0:   bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:00:07.0: PCI bridge to [bus 05]
pci 0000:00:07.0:   bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:00:14.4: PCI bridge to [bus 06]
pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
pci 0000:00:14.4:   bridge window [mem 0xfe100000-0xfe1fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xd0000000-0xffffffff window]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfe0fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdbffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:02: resource 2 [mem 0xdc100000-0xdc1fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe4fffff]
pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xfe300000-0xfe3fffff]
pci_bus 0000:05: resource 1 [mem 0xfe200000-0xfe2fffff]
pci_bus 0000:06: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:06: resource 1 [mem 0xfe100000-0xfe1fffff]
pci_bus 0000:06: resource 4 [io  0x0000-0x03af window]
pci_bus 0000:06: resource 5 [io  0x03e0-0x0cf7 window]
pci_bus 0000:06: resource 6 [io  0x03b0-0x03df window]
pci_bus 0000:06: resource 7 [io  0x0d00-0xffff window]
pci_bus 0000:06: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:06: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:06: resource 10 [mem 0xd0000000-0xffffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 34372K (ffff880033cce000 - ffff880035e5f000)
iommu: Adding device 0000:00:00.0 to group 0
iommu: Adding device 0000:00:02.0 to group 1
iommu: Adding device 0000:00:04.0 to group 2
iommu: Adding device 0000:00:05.0 to group 3
iommu: Adding device 0000:00:06.0 to group 4
iommu: Adding device 0000:00:07.0 to group 5
iommu: Adding device 0000:00:11.0 to group 6
iommu: Adding device 0000:00:12.0 to group 7
iommu: Adding device 0000:00:12.2 to group 7
iommu: Adding device 0000:00:13.0 to group 8
iommu: Adding device 0000:00:13.2 to group 8
iommu: Adding device 0000:00:14.0 to group 9
iommu: Adding device 0000:00:14.2 to group 10
iommu: Adding device 0000:00:14.3 to group 11
iommu: Adding device 0000:00:14.4 to group 12
iommu: Adding device 0000:00:14.5 to group 13
iommu: Adding device 0000:00:16.0 to group 14
iommu: Adding device 0000:00:16.2 to group 14
iommu: Adding device 0000:01:00.0 to group 15
iommu: Adding device 0000:01:00.1 to group 15
iommu: Adding device 0000:02:00.0 to group 16
iommu: Adding device 0000:03:00.0 to group 17
iommu: Adding device 0000:04:00.0 to group 18
iommu: Adding device 0000:05:00.0 to group 19
iommu: Adding device 0000:06:07.0 to group 12
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Lazy IO/TLB flushing enabled
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1456350082.960:1): initialized
Initialise system trusted keyring
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfe509000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-6-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 21, io mem 0xfe507000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-6-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 23, io mem 0xfe504000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 4.4.0-6-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.0: irq 18, io mem 0xfe50a000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 4.4.0-6-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 20, io mem 0xfe508000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 4.4.0-6-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:14.5: irq 18, io mem 0xfe506000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 4.4.0-6-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:16.0: irq 22, io mem 0xfe505000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 4.4.0-6-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8
usb 1-3: new high-speed USB device number 2 using ehci-pci
xhci_hcd 0000:03:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 4.4.0-6-generic xhci-hcd
usb usb8: SerialNumber: 0000:03:00.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9
usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 4.4.0-6-generic xhci-hcd
usb usb9: SerialNumber: 0000:03:00.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 10
xhci_hcd 0000:05:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 4.4.0-6-generic xhci-hcd
usb usb10: SerialNumber: 0000:05:00.0
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 11
usb usb11: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: xHCI Host Controller
usb usb11: Manufacturer: Linux 4.4.0-6-generic xhci-hcd
usb usb11: SerialNumber: 0000:05:00.0
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0: patch_level=0x06000629
microcode: CPU1: patch_level=0x06000629
microcode: CPU2: patch_level=0x06000629
microcode: CPU3: patch_level=0x06000629
microcode: CPU4: patch_level=0x06000629
microcode: CPU5: patch_level=0x06000629
microcode: CPU6: patch_level=0x06000629
microcode: CPU7: patch_level=0x06000629
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 061e260be8d7fe1ef17cc411aa1c5e584bdd0ddf'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
  Magic number: 4:141:703
rtc_cmos 00:03: setting system clock to 2016-02-24 21:41:23 UTC (1456350083)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1472K (ffffffff81f40000 - ffffffff820b0000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1940K (ffff88000181b000 - ffff880001a00000)
Freeing unused kernel memory: 184K (ffff880001dd2000 - ffff880001e00000)
random: systemd-udevd urandom read with 9 bits of entropy available
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc9000000e000, c8:60:00:06:b8:2a, XID 0c900800 IRQ 44
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b280 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b300 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b380 irq 19
ahci 0000:04:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
scsi host6: ahci
scsi host7: ahci
ata7: SATA max UDMA/133 abar m512@0xfe310000 port 0xfe310100 irq 27
ata8: SATA max UDMA/133 abar m512@0xfe310000 port 0xfe310180 irq 27
r8169 0000:02:00.0 enp2s0: renamed from eth0
firewire_ohci 0000:06:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
usb 5-1: new full-speed USB device number 2 using ohci-pci
usb 1-3: New USB device found, idVendor=046d, idProduct=081b
usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=2
usb 1-3: SerialNumber: A30D0B60
usb 5-1: New USB device found, idVendor=1b1c, idProduct=1b09
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: Corsair K70B Gaming Keyboard
usb 5-1: Manufacturer: Corsair
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Corsair Corsair K70B Gaming Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/0003:1B1C:1B09.0001/input/input5
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
hid-generic 0003:1B1C:1B09.0001: input,hidraw0: USB HID v1.11 Keyboard [Corsair Corsair K70B Gaming Keyboard] on usb-0000:00:13.0-1/input0
input: Corsair Corsair K70B Gaming Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.1/0003:1B1C:1B09.0002/input/input6
hid-generic 0003:1B1C:1B09.0002: input,hidraw1: USB HID v1.11 Device [Corsair Corsair K70B Gaming Keyboard] on usb-0000:00:13.0-1/input1
input: Corsair Corsair K70B Gaming Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.2/0003:1B1C:1B09.0003/input/input7
hid-generic 0003:1B1C:1B09.0003: input,hidraw2: USB HID v1.11 Keyboard [Corsair Corsair K70B Gaming Keyboard] on usb-0000:00:13.0-1/input2
tsc: Refined TSC clocksource calibration: 3110.369 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd58b490e4, max_idle_ns: 440795355987 ns
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: ASUS    DRW-24B1ST   a, 1.04, max UDMA/100
ata1.00: ATA-8: ST1500DL003-9VT16L, CC3C, max UDMA/133
ata1.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/100
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      ST1500DL003-9VT1 CC3C PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: ATA-8: MKNSSDEC60GB, 603ABBF0, max UDMA/133
ata2.00: 117231408 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      MKNSSDEC60GB     BBF0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
scsi 2:0:0:0: CD-ROM            ASUS     DRW-24B1ST   a   1.04 PQ: 0 ANSI: 5
sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg2 type 5
usb 4-4: new full-speed USB device number 2 using ohci-pci
firewire_core 0000:06:07.0: created device fw0: GUID 001fc600001b7050, S400
 sda: sda1 sda2 sda3 < sda5 sda6 > sda4
sd 0:0:0:0: [sda] Attached SCSI disk
usb 4-4: New USB device found, idVendor=0909, idProduct=001a
usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-4: Product: ATR USB microphone 
usb 4-4: Manufacturer: Audio-Technica
input: Audio-Technica ATR USB microphone  as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.3/0003:0909:001A.0004/input/input8
hid-generic 0003:0909:001A.0004: input,hiddev0,hidraw3: USB HID v1.00 Device [Audio-Technica ATR USB microphone ] on usb-0000:00:12.0-4/input3
usb 4-5: new full-speed USB device number 3 using ohci-pci
usb 4-5: New USB device found, idVendor=1b1c, idProduct=1b05
usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-5: Product: Corsair M65 Gaming Mouse
usb 4-5: Manufacturer: Corsair
input: Corsair Corsair M65 Gaming Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/0003:1B1C:1B05.0005/input/input9
hid-generic 0003:1B1C:1B05.0005: input,hidraw4: USB HID v1.11 Mouse [Corsair Corsair M65 Gaming Mouse] on usb-0000:00:12.0-5/input0
input: Corsair Corsair M65 Gaming Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.1/0003:1B1C:1B05.0006/input/input10
hid-generic 0003:1B1C:1B05.0006: input,hidraw5: USB HID v1.11 Keyboard [Corsair Corsair M65 Gaming Mouse] on usb-0000:00:12.0-5/input1
input: Corsair Corsair M65 Gaming Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.2/0003:1B1C:1B05.0007/input/input11
hid-generic 0003:1B1C:1B05.0007: input,hidraw6: USB HID v1.11 Device [Corsair Corsair M65 Gaming Mouse] on usb-0000:00:12.0-5/input2
raid6: sse2x1   gen()  4544 MB/s
raid6: sse2x1   xor()  3607 MB/s
raid6: sse2x2   gen()  6312 MB/s
raid6: sse2x2   xor()  4787 MB/s
raid6: sse2x4   gen()  7267 MB/s
raid6: sse2x4   xor()  4947 MB/s
raid6: using algorithm sse2x4 gen() 7267 MB/s
raid6: .... xor() 4947 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
clocksource: Switched to clocksource tsc
xor: automatically using best checksumming function:
   avx       :  9285.000 MB/sec
Btrfs loaded
BTRFS: device fsid 874321aa-eac5-4281-bcff-289f4b2bc50d devid 1 transid 432587 /dev/sda5
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: RTC configured in localtime, applying delta of -360 minutes to system time.
systemd[1]: Failed to insert module 'kdbus': Function not implemented
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on udev Control Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Mounting RPC Pipe File System...
systemd[1]: Mounting Debug File System...
systemd[1]: Created slice system-getty.slice.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Started Read required files in advance.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Braille Device Support...
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Reached target Slices.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Set up automount home.automount.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Started Load Kernel Modules.
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
systemd[1]: Mounted RPC Pipe File System.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Braille Device Support.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Journal Service.
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
systemd-journald[295]: Received request to flush runtime journal from PID 1
random: nonblocking pool is initialized
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 3.0.0
wmi: Mapper loaded
audit: type=1400 audit(1456371686.731:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=508 comm="apparmor_parser"
audit: type=1400 audit(1456371686.731:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=508 comm="apparmor_parser"
audit: type=1400 audit(1456371686.731:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=508 comm="apparmor_parser"
audit: type=1400 audit(1456371686.731:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=508 comm="apparmor_parser"
MCE: In-kernel MCE decoding enabled.
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
audit: type=1400 audit(1456371686.747:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=508 comm="apparmor_parser"
audit: type=1400 audit(1456371686.747:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=508 comm="apparmor_parser"
audit: type=1400 audit(1456371686.747:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=508 comm="apparmor_parser"
audit: type=1400 audit(1456371686.747:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=508 comm="apparmor_parser"
audit: type=1400 audit(1456371686.747:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=508 comm="apparmor_parser"
[drm] Initialized drm 1.1.0 20060810
media: Linux media interface: v0.10
Linux video capture interface: v2.00
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  352.63  Sat Nov  7 21:25:42 PST 2015
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D0:    inputs:
snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input18
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input19
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
Adding 17407996k swap on /dev/sda4.  Priority:-1 extents:1 across:17407996k FS
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input20
asus_wmi: Number of fans: 1
BTRFS info (device sda5): enabling auto defrag
BTRFS info (device sda5): disk space caching is enabled
nvidia_uvm: Loaded the UVM driver, major device number 245
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input21
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input22
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input23
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input24
usb 1-3: set resolution quirk: cval->res = 384
uvcvideo: Found UVC 1.00 device  (046d:081b)
input: UVC Camera (046d:081b) as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input25
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
usbcore: registered new interface driver snd-usb-audio
BTRFS error (device sda5): could not find root 8
BTRFS error (device sda5): could not find root 8
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link down
r8169 0000:02:00.0 enp2s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
snd_hda_codec_hdmi hdaudioC2D0: HDMI: invalid ELD data byte 18
snd_hda_codec_hdmi hdaudioC2D0: HDMI: invalid ELD data byte 42
usb 1-3: reset high-speed USB device number 2 using ehci-pci
snd_hda_codec_hdmi hdaudioC2D0: HDMI: invalid ELD data byte 18
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
BTRFS error (device sda5): could not find root 8
BTRFS error (device sda5): could not find root 8
audit_printk_skb: 36 callbacks suppressed
audit: type=1400 audit(1456351484.614:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=23640 comm="apparmor_parser"
audit: type=1400 audit(1456351484.618:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=23640 comm="apparmor_parser"
audit: type=1400 audit(1456351484.638:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="third_party" pid=23640 comm="apparmor_parser"
SGI XFS with ACLs, security attributes, realtime, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
ntfs: driver 2.1.32 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
EXT4-fs (sda3): unable to read superblock
EXT4-fs (sda3): unable to read superblock
EXT4-fs (sda3): unable to read superblock
FAT-fs (sda3): invalid media value (0x4b)
FAT-fs (sda3): Can't find a valid FAT filesystem
XFS (sda3): Invalid superblock magic number
FAT-fs (sda3): invalid media value (0x4b)
FAT-fs (sda3): Can't find a valid FAT filesystem
MINIX-fs: unable to read superblock
attempt to access beyond end of device
sda3: rw=16, want=3, limit=2
hfsplus: unable to find HFS+ superblock
qnx4: no qnx4 filesystem (no root dir).
ufs: You didn't specify the type of your ufs filesystem
               
               mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ...
               
               >>>WARNING>WARNING

Return To nvidia-352 System Information