dmesg - only-three
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.0.5-antix.1-486-smp (root@antix1) (gcc version 4.9.2 (Debian 4.9.2-20) ) #1 SMP Mon Jun 8 00:21:57 EEST 2015
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e7400-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000137effff] usable
BIOS-e820: [mem 0x00000000137f0000-0x00000000137ffbff] ACPI data
BIOS-e820: [mem 0x00000000137ffc00-0x00000000137fffff] ACPI NVS
BIOS-e820: [mem 0x00000000fffe0000-0x00000000ffffffff] reserved
Notice: NX (Execute Disable) protection missing in CPU!
SMBIOS 2.3 present.
DMI: Compaq Presario/065Ch, BIOS 4.06 09/21/2000
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x137f0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CBFFF write-protect
CC000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FF0000000 write-back
1 base 010000000 mask FFE000000 write-back
2 base 012000000 mask FFF000000 write-back
3 base 013000000 mask FFF800000 write-back
4 disabled
5 disabled
6 disabled
7 disabled
PAT not supported by CPU.
initial memory mapped: [mem 0x00000000-0x01bfffff]
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x13000000-0x133fffff]
[mem 0x13000000-0x133fffff] page 4M
init_memory_mapping: [mem 0x00100000-0x12ffffff]
[mem 0x00100000-0x003fffff] page 4k
[mem 0x00400000-0x12ffffff] page 4M
init_memory_mapping: [mem 0x13400000-0x137effff]
[mem 0x13400000-0x137effff] page 4k
BRK [0x018c2000, 0x018c2fff] PGTABLE
RAMDISK: [mem 0x11db0000-0x12d95fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F7F50 000014 (v00 PTLTD )
ACPI: RSDT 0x00000000137FD34B 00002C (v01 PTLTD RSDT 06040000 LTP 00000000)
ACPI: FACP 0x00000000137FFB48 000084 (v02 COMPAQ COBRA 06040000 PTL_ 000F4240)
ACPI: DSDT 0x00000000137FD377 0027D1 (v01 Compaq Cobra 06040000 MSFT 0100000B)
ACPI: FACS 0x00000000137FFFC0 000040
ACPI: DBGP 0x00000000137FFBCC 000034 (v01 PTLTD $DBGTBL$ 06040000 LTP 00000001)
0MB HIGHMEM available.
311MB LOWMEM available.
mapped low ram: 0 - 137f0000
low ram: 0 - 137f0000
BRK [0x018c3000, 0x018c3fff] PGTABLE
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
Normal [mem 0x0000000001000000-0x00000000137effff]
HighMem empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000137effff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000000137effff]
On node 0 totalpages: 79758
free_area_init_node: node 0, pgdat c17bc640, node_mem_map d3532024
DMA zone: 36 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3998 pages, LIFO batch:0
Normal zone: 666 pages used for memmap
Normal zone: 75760 pages, LIFO batch:15
Using APIC driver default
ACPI: PM-Timer IO Port: 0x8008
smpboot: Allowing 1 CPUs, 0 hotplug CPUs
Local APIC disabled by BIOS -- you can enable it with "lapic"
APIC: disable apic facility
APIC: switched to apic NOOP
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff]
PM: Registered nosave memory: [mem 0x000e8000-0x000fffff]
e820: [mem 0x13800000-0xfffdffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 16 pages/cpu @d351e000 s35980 r0 d29556 u65536
pcpu-alloc: s35980 r0 d29556 u65536 alloc=16*4096
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 79056
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (00000000:00000000)
Memory: 290412K/319032K available (5807K kernel code, 399K rwdata, 1744K rodata, 504K init, 440K bss, 28620K reserved, 0K cma-reserved, 0K highmem)
virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xd3ff0000 - 0xff7fe000 ( 696 MB)
lowmem : 0xc0000000 - 0xd37f0000 ( 311 MB)
.init : 0xc17c7000 - 0xc1845000 ( 504 kB)
.data : 0xc15ac0cb - 0xc17c5d00 (2151 kB)
.text : 0xc1000000 - 0xc15ac0cb (5808 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
NR_IRQS:2304 nr_irqs:32 16
CPU 0 irqstacks, hard=d3006000 soft=d3008000
Console: colour VGA+ 80x25
console [tty0] enabled
tsc: Fast TSC calibration using PIT
tsc: Detected 599.202 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 1198.40 BogoMIPS (lpj=2396808)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150204
ACPI: All ACPI Tables successfully acquired
ACPI: setting ELCR to 0080 (from 0a00)
Security Framework initialized
Yama: becoming mindful.
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
Freeing SMP alternatives memory: 28K (c1845000 - c184c000)
smpboot: weird, boot CPU (#0) not listed by the BIOS
smpboot: SMP motherboard not detected
smpboot: SMP disabled
smpboot: Local APIC not detected. Using dummy APIC emulation.
Performance Events:
no APIC, boot with the "lapic" boot parameter to force-enable it.
no hardware sampling interrupt available.
p6 PMU driver.
... version: 0
... bit width: 32
... generic registers: 2
... value mask: 00000000ffffffff
... max period: 000000007fffffff
... fixed-purpose events: 0
... event mask: 0000000000000003
x86: Booted up 1 node, 1 CPUs
smpboot: Total of 1 processors activated (1198.40 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x137ffc00-0x137fffff] (1024 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: PCI BIOS revision 2.10 entry at 0xfd834, last bus=1
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150204/hwxface-580)
ACPI: (supports S0 S1 S4 S5)
ACPI: Using PIC for interrupt routing
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7 window] (ignored)
acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff window] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff window] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x14000000-0xffdfffff window] (ignored)
PCI: root bus 00: using default resources
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
pci 0000:00:00.0: [1106:0601] type 00 class 0x060000
pci 0000:00:00.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
pci 0000:00:01.0: [1106:8601] type 01 class 0x060400
pci 0000:00:07.0: [1106:0686] type 00 class 0x060100
pci 0000:00:07.1: [1106:0571] type 00 class 0x01018a
pci 0000:00:07.1: reg 0x20: [io 0x1820-0x182f]
pci 0000:00:07.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:07.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:07.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:07.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:07.2: [1106:3038] type 00 class 0x0c0300
pci 0000:00:07.2: reg 0x20: [io 0x1800-0x181f]
pci 0000:00:07.2: System wakeup disabled by ACPI
pci 0000:00:07.4: [1106:3057] type 00 class 0x060100
pci 0000:00:07.4: can't claim BAR 13 [io 0x8000-0x80ff]: address conflict with ACPI PM1a_EVT_BLK [io 0x8000-0x8003]
pci 0000:00:07.4: quirk: [io 0x8080-0x808f] claimed by vt82c686 SMB
pci 0000:00:07.5: [1106:3058] type 00 class 0x040100
pci 0000:00:07.5: reg 0x10: [io 0x1000-0x10ff]
pci 0000:00:07.5: reg 0x14: [io 0x1834-0x1837]
pci 0000:00:07.5: reg 0x18: [io 0x1830-0x1833]
pci 0000:00:09.0: [14f1:1803] type 00 class 0x020000
pci 0000:00:09.0: reg 0x10: [io 0x1400-0x14ff]
pci 0000:00:09.0: reg 0x14: [mem 0xf4000000-0xf4003fff]
pci 0000:00:09.0: PME# supported from D3hot D3cold
pci 0000:00:09.1: [14f1:1815] type 00 class 0x078000
pci 0000:00:09.1: reg 0x10: [io 0x1838-0x183f]
pci 0000:00:09.1: reg 0x14: [mem 0xf4004000-0xf4007fff]
pci 0000:00:09.1: PME# supported from D3hot D3cold
pci 0000:00:0a.0: [104c:ac50] type 02 class 0x060700
pci 0000:00:0a.0: reg 0x10: [mem 0x14000000-0x14000fff]
pci 0000:00:0a.0: supports D1 D2
pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: System wakeup disabled by ACPI
pci 0000:01:00.0: [1023:8520] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf5000000-0xf57fffff]
pci 0000:01:00.0: reg 0x14: [mem 0xf4100000-0xf411ffff]
pci 0000:01:00.0: reg 0x18: [mem 0xf4800000-0xf4ffffff]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xf4100000-0xf57fffff]
pci 0000:00:0a.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 05
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3) *0, disabled.
ACPI : EC: GPE = 0x6, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 32 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0x137f0000-0x13ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switched to clocksource pit
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:01: [mem 0x000dc000-0x000dffff] has been reserved
system 00:01: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:01: [mem 0xfffe0000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: disabling [io 0x8000-0x808f] because it overlaps 0000:00:07.4 BAR 13 [io 0x8000-0x80ff]
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:02: [io 0x0220-0x022f] has been reserved
system 00:02: [io 0x0300-0x0307] has been reserved
system 00:02: [io 0x0388-0x038b] has been reserved
system 00:02: [io 0x9050-0x9051] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
pnp: PnP ACPI: found 5 devices
Switched to clocksource acpi_pm
pci 0000:00:07.4: BAR 13: [io 0x8000-0x80ff] has bogus alignment
pci 0000:00:0a.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
pci 0000:00:0a.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
pci 0000:00:0a.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:00:0a.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:00:0a.0: BAR 15: assigned [mem 0x18000000-0x1bffffff pref]
pci 0000:00:0a.0: BAR 16: assigned [mem 0x1c000000-0x1fffffff]
pci 0000:00:01.0: BAR 15: assigned [mem 0x14100000-0x141fffff pref]
pci 0000:00:0a.0: BAR 13: assigned [io 0x1c00-0x1cff]
pci 0000:00:0a.0: BAR 14: assigned [io 0x2000-0x20ff]
pci 0000:01:00.0: BAR 6: assigned [mem 0x14100000-0x1410ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xf4100000-0xf57fffff]
pci 0000:00:01.0: bridge window [mem 0x14100000-0x141fffff pref]
pci 0000:00:0a.0: CardBus bridge to [bus 02-05]
pci 0000:00:0a.0: bridge window [io 0x1c00-0x1cff]
pci 0000:00:0a.0: bridge window [io 0x2000-0x20ff]
pci 0000:00:0a.0: bridge window [mem 0x18000000-0x1bffffff pref]
pci 0000:00:0a.0: bridge window [mem 0x1c000000-0x1fffffff]
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 1 [mem 0xf4100000-0xf57fffff]
pci_bus 0000:01: resource 2 [mem 0x14100000-0x141fffff pref]
pci_bus 0000:02: resource 0 [io 0x1c00-0x1cff]
pci_bus 0000:02: resource 1 [io 0x2000-0x20ff]
pci_bus 0000:02: resource 2 [mem 0x18000000-0x1bffffff pref]
pci_bus 0000:02: resource 3 [mem 0x1c000000-0x1fffffff]
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: disabling DAC on VIA PCI bridge
pci 0000:00:07.0: Disabling VIA external APIC routing
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
PCI: CLS mismatch (32 != 64), using 32 bytes
pci 0000:01:00.0: Video device with shadowed ROM
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 16280K (d1db0000 - d2d96000)
microcode: CPU0 sig=0x686, pf=0x10, revision=0x0
microcode: Microcode Update Driver: v2.00 , Peter Oruba
futex hash table entries: 256 (order: 2, 16384 bytes)
Initialise system trusted keyring
HugeTLB registered 4 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
ntfs: driver 2.1.31 [Flags: R/W].
fuse init (API version 7.23)
aufs 3.x-rcN-20150406
Key type big_key registered
alg: No test for stdrng (krng)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Linux agpgart interface v0.103
intel_idle: does not run on family 6 model 8
GHES: HEST is not enabled!
brd: module loaded
loop: module loaded
pata_via 0000:00:07.1: version 0.3.4
scsi host0: pata_via
scsi host1: pata_via
ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0x1820 irq 14
ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0x1828 irq 15
libphy: Fixed MDIO Bus: probed
VFIO - User Level meta-driver version: 0.3
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver ums-realtek
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 10
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading compiled-in X.509 certificates
registered taskstats version 1
hd: no drives specified - use hd=cyl,head,sectors on kernel command line
rtc_cmos 00:00: setting system clock to 2016-02-17 01:30:04 UTC (1455672604)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ata1.00: ATA-5: IBM-DJSA-210, JSAOAB0A, max UDMA/66
ata1.00: 11733120 sectors, multi 16: LBA
ata1.00: configured for UDMA/66
scsi 0:0:0:0: Direct-Access ATA IBM-DJSA-210 AB0A PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 11733120 512-byte logical blocks: (6.00 GB/5.59 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
tsc: Refined TSC clocksource calibration: 599.215 MHz
ata2.00: ATAPI: TOSHIBA DVD-ROM SD-C2502, 1007, max UDMA/33
ata2.00: configured for UDMA/33
scsi 1:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-C2502 1007 PQ: 0 ANSI: 5
sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 504K (c17c7000 - c1845000)
Write protecting the kernel text: 5812k
Write protecting the kernel read-only data: 1748k
systemd-udevd[73]: starting version 215
random: systemd-udevd urandom read with 24 bits of entropy available
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (59 C)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 3, io base 0x00001800
tulip: Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007)
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 4.0.5-antix.1-486-smp uhci_hcd
usb usb1: SerialNumber: 0000:00:07.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
tulip0: MII transceiver #1 config 1000 status 782d advertising 01e1
tulip0: MII transceiver #0 config 1000 status 782d advertising 01e1
Switched to clocksource tsc
net eth0: Conexant LANfinity rev 8 at Port 0x1400, 00:50:8b:aa:1f:29, IRQ 11
raid6: mmxx1 520 MB/s
raid6: mmxx2 625 MB/s
raid6: sse1x1 224 MB/s
raid6: sse1x2 657 MB/s
raid6: using algorithm sse1x2 (657 MB/s)
raid6: using intx1 recovery algorithm
xor: measuring software checksum speed
pIII_sse : 1210.000 MB/sec
prefetch64-sse: 1363.000 MB/sec
xor: using function: prefetch64-sse (1363.000 MB/sec)
Btrfs loaded
PM: Starting manual resume from disk
random: nonblocking pool is initialized
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd-udevd[290]: starting version 215
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: AC Adapter [AC] (on-line)
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input4
ACPI: Battery Slot [BAT0] (battery present)
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
Switched to clocksource acpi_pm
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x3FC
parport_pc: VIA parallel port disabled in BIOS
agpgart: Detected VIA Apollo ProMedia/PLE133Ta chipset
agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
ACPI Warning: SystemIO range 0x0000000000008080-0x0000000000008087 conflicts with OpRegion 0x0000000000008080-0x0000000000008086 (\_SB_.PCI0.PM__.SMIO) (20150204/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
yenta_cardbus 0000:00:0a.0: CardBus bridge found [0e11:b103]
yenta_cardbus 0000:00:0a.0: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:00:0a.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:00:0a.0: TI: mfunc 0x01a21cb2, devctl 0x64
input: PC Speaker as /devices/platform/pcspkr/input/input5
yenta_cardbus 0000:00:0a.0: ISA IRQ mask 0x0450, PCI irq 11
yenta_cardbus 0000:00:0a.0: Socket status: 30000006
via686a 0000:00:07.4: base address not set - upgrade BIOS or use force_addr=0xaddr
psmouse serio1: synaptics: Touchpad model: 1, fw: 5.5, id: 0x9e56b1, caps: 0x904713/0x4006/0x0, board id: 0, fw id: 753378
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ppdev: user-space parallel port driver
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
excluding 0xc0000-0xcbfff 0xdc000-0xdffff 0xe4000-0xfffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
clean.
pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
clean.
Adding 1076348k swap on /dev/sda2. Priority:-1 extents:1 across:1076348k FS
EXT4-fs (sda1): re-mounted. Opts: (null)
EXT4-fs (sda1): re-mounted. Opts: (null)
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: dm-devel@redhat.com
lp: driver loaded but no devices found
NET: Registered protocol family 17
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).