dmesg - vem1
systemd-sysv-generator[3382]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
usb 3-1.4: new full-speed USB device number 34 using xhci_hcd
usb 3-1.4: New USB device found, idVendor=046d, idProduct=0a02
usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.4: Product: Logitech USB Headset
usb 3-1.4: Manufacturer: Logitech
usb 3-1.4: Warning! Unlikely big volume range (=464), cval->res is probably wrong.
usb 3-1.4: [6] FU [Mic Playback Volume] ch = 1, val = -10496/-3072/16
input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:1c.6/0000:09:00.0/usb3/3-1/3-1.4/3-1.4:1.3/0003:046D:0A02.001B/input/input86
hid-generic 0003:046D:0A02.001B: input,hidraw4: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:09:00.0-1.4/input3
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 3:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 3:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend of devices complete after 77.161 msecs
PM: late suspend of devices complete after 0.317 msecs
xhci_hcd 0000:09:00.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 15.666 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
Broke affinity for irq 23
Broke affinity for irq 31
Broke affinity for irq 36
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
microcode: CPU0 microcode updated early to revision 0x1c, date = 2014-07-03
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
microcode: CPU1 microcode updated early to revision 0x1c, date = 2014-07-03
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
microcode: CPU2 microcode updated early to revision 0x1c, date = 2014-07-03
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
microcode: CPU3 microcode updated early to revision 0x1c, date = 2014-07-03
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
xhci_hcd 0000:09:00.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 13.575 msecs
PM: early resume of devices complete after 0.248 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
rtc_cmos 00:02: System wakeup disabled by ACPI
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
sd 0:0:0:0: [sda] Starting disk
sd 3:0:0:0: [sdb] Starting disk
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
usb 3-1: reset full-speed USB device number 2 using xhci_hcd
usb 3-1: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
usb 3-2: reset full-speed USB device number 20 using xhci_hcd
usb 3-1.3: reset low-speed USB device number 5 using xhci_hcd
usb 3-1.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-1.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-1.4: reset full-speed USB device number 34 using xhci_hcd
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
usb 3-1.1: reset full-speed USB device number 4 using xhci_hcd
PM: resume of devices complete after 1980.269 msecs
PM: Finishing wakeup.
Restarting tasks ...
pci_bus 0000:04: Allocating resources
pcieport 0000:03:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-08] add_size 200000 add_align 100000
pcieport 0000:03:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:03:00.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:03:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pcieport 0000:03:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pcieport 0000:03:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pcieport 0000:03:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
done.
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
ata1: link is slow to respond, please be patient (ready=0)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
e1000e: eth0 NIC Link is Down
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 3:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 3:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend of devices complete after 74.643 msecs
PM: late suspend of devices complete after 0.314 msecs
xhci_hcd 0000:09:00.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 15.658 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
Broke affinity for irq 23
Broke affinity for irq 36
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
microcode: CPU0 microcode updated early to revision 0x1c, date = 2014-07-03
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
microcode: CPU1 microcode updated early to revision 0x1c, date = 2014-07-03
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
microcode: CPU2 microcode updated early to revision 0x1c, date = 2014-07-03
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
microcode: CPU3 microcode updated early to revision 0x1c, date = 2014-07-03
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
xhci_hcd 0000:09:00.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 13.598 msecs
PM: early resume of devices complete after 0.264 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
rtc_cmos 00:02: System wakeup disabled by ACPI
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
sd 0:0:0:0: [sda] Starting disk
sd 3:0:0:0: [sdb] Starting disk
ata8: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
usb 3-2: reset full-speed USB device number 20 using xhci_hcd
usb 3-1: reset full-speed USB device number 2 using xhci_hcd
usb 3-1: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
usb 3-1.3: reset low-speed USB device number 5 using xhci_hcd
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
usb 3-1.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-1.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-1.1: reset full-speed USB device number 4 using xhci_hcd
PM: resume of devices complete after 2012.226 msecs
PM: Finishing wakeup.
Restarting tasks ...
pci_bus 0000:04: Allocating resources
pcieport 0000:03:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-08] add_size 200000 add_align 100000
pcieport 0000:03:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:03:00.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:03:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pcieport 0000:03:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pcieport 0000:03:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pcieport 0000:03:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
usb 3-1.4: USB disconnect, device number 34
done.
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
ata1: link is slow to respond, please be patient (ready=0)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
SGI XFS with ACLs, security attributes, realtime, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
ntfs: driver 2.1.32 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
EXT4-fs (sda2): unable to read superblock
EXT4-fs (sda2): unable to read superblock
EXT4-fs (sda2): unable to read superblock
FAT-fs (sda2): invalid media value (0x1f)
FAT-fs (sda2): Can't find a valid FAT filesystem
XFS (sda2): Invalid superblock magic number
FAT-fs (sda2): invalid media value (0x1f)
FAT-fs (sda2): Can't find a valid FAT filesystem
MINIX-fs: unable to read superblock
attempt to access beyond end of device
sda2: rw=16, want=3, limit=2
hfsplus: unable to find HFS+ superblock
qnx4: no qnx4 filesystem (no root dir).
ufs: You didn't specify the type of your ufs filesystem
mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ...
>>>WARNING>WARNINGres is probably wrong.
usb 3-1.4: [6] FU [Mic Playback Volume] ch = 1, val = -10496/-3072/16
input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:1c.6/0000:09:00.0/usb3/3-1/3-1.4/3-1.4:1.3/0003:046D:0A02.0023/input/input121
hid-generic 0003:046D:0A02.0023: input,hidraw4: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:09:00.0-1.4/input3
usb 3-1.2: new full-speed USB device number 43 using xhci_hcd
usb 3-1.2: not running at top speed; connect to a high speed hub
usb 3-1.2: New USB device found, idVendor=04a9, idProduct=1779
usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.2: Product: MB2300 series
usb 3-1.2: Manufacturer: Canon
usb 3-1.2: SerialNumber: 116D09
usb 3-1.2: ep 0x89 - rounding interval to 64 microframes, ep desc says 88 microframes
usblp 3-1.2:1.1: usblp3: USB Bidirectional printer dev 43 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1779
usblp 3-1.2:1.2: usblp4: USB Bidirectional printer dev 43 if 2 alt 0 proto 2 vid 0x04A9 pid 0x1779
usb 3-1.4: USB disconnect, device number 42
usb 3-1.4: new full-speed USB device number 44 using xhci_hcd
usb 3-1.4: New USB device found, idVendor=046d, idProduct=0a02
usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.4: Product: Logitech USB Headset
usb 3-1.4: Manufacturer: Logitech
usb 3-1.4: Warning! Unlikely big volume range (=464), cval->res is probably wrong.
usb 3-1.4: [6] FU [Mic Playback Volume] ch = 1, val = -10496/-3072/16
input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:1c.6/0000:09:00.0/usb3/3-1/3-1.4/3-1.4:1.3/0003:046D:0A02.0024/input/input122
hid-generic 0003:046D:0A02.0024: input,hidraw4: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:09:00.0-1.4/input3
usb 3-1.4: USB disconnect, device number 44
usb 3-1.4: new full-speed USB device number 45 using xhci_hcd
usb 3-1.4: New USB device found, idVendor=046d, idProduct=0a02
usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.4: Product: Logitech USB Headset
usb 3-1.4: Manufacturer: Logitech
usb 3-1.4: Warning! Unlikely big volume range (=464), cval->res is probably wrong.
usb 3-1.4: [6] FU [Mic Playback Volume] ch = 1, val = -10496/-3072/16
input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:1c.6/0000:09:00.0/usb3/3-1/3-1.4/3-1.4:1.3/0003:046D:0A02.0025/input/input123
hid-generic 0003:046D:0A02.0025: input,hidraw4: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:09:00.0-1.4/input3
usblp3: removed
Did not find alt setting 1 for intf 0, config 1
usblp4: removed
Did not find alt setting 2 for intf 0, config 1
usblp 3-1.2:1.1: usblp3: USB Bidirectional printer dev 43 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1779
usblp 3-1.2:1.2: usblp4: USB Bidirectional printer dev 43 if 2 alt 0 proto 2 vid 0x04A9 pid 0x1779
usblp3: removed
usblp 3-1.2:1.1: usblp3: USB Bidirectional printer dev 43 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1779
usblp4: removed
usblp 3-1.2:1.2: usblp4: USB Bidirectional printer dev 43 if 2 alt 0 proto 2 vid 0x04A9 pid 0x1779
usblp3: removed
Did not find alt setting 1 for intf 0, config 1
usb 3-1.2: USB disconnect, device number 43
usblp4: removed
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.015 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 3:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 3:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend of devices complete after 80.187 msecs
PM: late suspend of devices complete after 0.315 msecs
xhci_hcd 0000:09:00.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 15.667 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
Broke affinity for irq 23
Broke affinity for irq 31
smpboot: CPU 2 is now offline
Broke affinity for irq 23
Broke affinity for irq 31
Broke affinity for irq 36
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
microcode: CPU0 microcode updated early to revision 0x1c, date = 2014-07-03
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
microcode: CPU1 microcode updated early to revision 0x1c, date = 2014-07-03
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
microcode: CPU2 microcode updated early to revision 0x1c, date = 2014-07-03
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
microcode: CPU3 microcode updated early to revision 0x1c, date = 2014-07-03
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
xhci_hcd 0000:09:00.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 13.572 msecs
PM: early resume of devices complete after 0.255 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
rtc_cmos 00:02: System wakeup disabled by ACPI
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
sd 0:0:0:0: [sda] Starting disk
sd 3:0:0:0: [sdb] Starting disk
ata8: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
usb 3-2: reset full-speed USB device number 20 using xhci_hcd
usb 3-1: reset full-speed USB device number 36 using xhci_hcd
usb 3-1: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
usb 3-1.3: reset low-speed USB device number 41 using xhci_hcd
usb 3-1.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-1.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
usb 3-1.4: reset full-speed USB device number 45 using xhci_hcd
usb 3-1.1: reset full-speed USB device number 37 using xhci_hcd
PM: resume of devices complete after 2192.362 msecs
PM: Finishing wakeup.
Restarting tasks ...
pci_bus 0000:04: Allocating resources
pcieport 0000:03:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-08] add_size 200000 add_align 100000
pcieport 0000:03:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:03:00.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:03:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pcieport 0000:03:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pcieport 0000:03:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pcieport 0000:03:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
done.
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
ata1: link is slow to respond, please be patient (ready=0)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
usb 3-1.4: USB disconnect, device number 45
usb 3-1.4: new full-speed USB device number 46 using xhci_hcd
usb 3-1.4: New USB device found, idVendor=046d, idProduct=0a02
usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.4: Product: Logitech USB Headset
usb 3-1.4: Manufacturer: Logitech
usb 3-1.4: Warning! Unlikely big volume range (=464), cval->res is probably wrong.
usb 3-1.4: [6] FU [Mic Playback Volume] ch = 1, val = -10496/-3072/16
input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:1c.6/0000:09:00.0/usb3/3-1/3-1.4/3-1.4:1.3/0003:046D:0A02.0026/input/input127
hid-generic 0003:046D:0A02.0026: input,hidraw4: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:09:00.0-1.4/input3
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 3:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 3:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend of devices complete after 79.869 msecs
PM: late suspend of devices complete after 0.309 msecs
xhci_hcd 0000:09:00.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 15.661 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
Broke affinity for irq 31
smpboot: CPU 2 is now offline
Broke affinity for irq 23
Broke affinity for irq 31
Broke affinity for irq 36
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
microcode: CPU0 microcode updated early to revision 0x1c, date = 2014-07-03
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
microcode: CPU1 microcode updated early to revision 0x1c, date = 2014-07-03
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
microcode: CPU2 microcode updated early to revision 0x1c, date = 2014-07-03
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
microcode: CPU3 microcode updated early to revision 0x1c, date = 2014-07-03
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
xhci_hcd 0000:09:00.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 13.584 msecs
PM: early resume of devices complete after 0.250 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
rtc_cmos 00:02: System wakeup disabled by ACPI
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
sd 0:0:0:0: [sda] Starting disk
sd 3:0:0:0: [sdb] Starting disk
ata8: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata7: SATA link down (SStatus 0 SControl 300)
usb 3-2: reset full-speed USB device number 20 using xhci_hcd
usb 3-1: reset full-speed USB device number 36 using xhci_hcd
usb 3-1: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
usb 3-1.3: reset low-speed USB device number 41 using xhci_hcd
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
usb 3-1.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-1.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-1.4: reset full-speed USB device number 46 using xhci_hcd
usb 3-1.1: reset full-speed USB device number 37 using xhci_hcd
PM: resume of devices complete after 2192.347 msecs
PM: Finishing wakeup.
Restarting tasks ...
pci_bus 0000:04: Allocating resources
pcieport 0000:03:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-08] add_size 200000 add_align 100000
pcieport 0000:03:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:03:00.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:03:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pcieport 0000:03:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pcieport 0000:03:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pcieport 0000:03:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
usb 3-1.4: 1:1: cannot set freq 44100 to ep 0x1
done.
usb 3-1.4: USB disconnect, device number 46
usb 3-1.4: new full-speed USB device number 47 using xhci_hcd
usb 3-1.4: New USB device found, idVendor=046d, idProduct=0a02
usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.4: Product: Logitech USB Headset
usb 3-1.4: Manufacturer: Logitech
usb 3-1.4: Warning! Unlikely big volume range (=464), cval->res is probably wrong.
usb 3-1.4: [6] FU [Mic Playback Volume] ch = 1, val = -10496/-3072/16
input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:1c.6/0000:09:00.0/usb3/3-1/3-1.4/3-1.4:1.3/0003:046D:0A02.0027/input/input131
hid-generic 0003:046D:0A02.0027: input,hidraw4: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:09:00.0-1.4/input3
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
ata1: link is slow to respond, please be patient (ready=0)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 3:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 3:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend of devices complete after 78.269 msecs
PM: late suspend of devices complete after 0.324 msecs
xhci_hcd 0000:09:00.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 15.658 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 36
smpboot: CPU 1 is now offline
Broke affinity for irq 23
Broke affinity for irq 36
smpboot: CPU 2 is now offline
Broke affinity for irq 23
Broke affinity for irq 36
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
microcode: CPU0 microcode updated early to revision 0x1c, date = 2014-07-03
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
microcode: CPU1 microcode updated early to revision 0x1c, date = 2014-07-03
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
microcode: CPU2 microcode updated early to revision 0x1c, date = 2014-07-03
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
microcode: CPU3 microcode updated early to revision 0x1c, date = 2014-07-03
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
xhci_hcd 0000:09:00.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 13.589 msecs
PM: early resume of devices complete after 0.241 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
rtc_cmos 00:02: System wakeup disabled by ACPI
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
sd 0:0:0:0: [sda] Starting disk
sd 3:0:0:0: [sdb] Starting disk
ata8: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
usb 3-2: reset full-speed USB device number 20 using xhci_hcd
usb 3-1: reset full-speed USB device number 36 using xhci_hcd
usb 3-1: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
usb 3-1.3: reset low-speed USB device number 41 using xhci_hcd
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
usb 3-1.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-1.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-1.4: reset full-speed USB device number 47 using xhci_hcd
usb 3-1.1: reset full-speed USB device number 37 using xhci_hcd
PM: resume of devices complete after 2192.283 msecs
PM: Finishing wakeup.
Restarting tasks ...
pci_bus 0000:04: Allocating resources
pcieport 0000:03:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-08] add_size 200000 add_align 100000
pcieport 0000:03:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:03:00.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:03:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pcieport 0000:03:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pcieport 0000:03:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pcieport 0000:03:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
done.
usb 3-1.2: new full-speed USB device number 48 using xhci_hcd
usb 3-1.2: not running at top speed; connect to a high speed hub
usb 3-1.2: New USB device found, idVendor=04a9, idProduct=1779
usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.2: Product: MB2300 series
usb 3-1.2: Manufacturer: Canon
usb 3-1.2: SerialNumber: 116D09
usb 3-1.2: ep 0x89 - rounding interval to 64 microframes, ep desc says 88 microframes
usblp 3-1.2:1.1: usblp3: USB Bidirectional printer dev 48 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1779
usblp 3-1.2:1.2: usblp4: USB Bidirectional printer dev 48 if 2 alt 0 proto 2 vid 0x04A9 pid 0x1779
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
ata1: link is slow to respond, please be patient (ready=0)
usblp3: removed
Did not find alt setting 1 for intf 0, config 1
usblp4: removed
Did not find alt setting 2 for intf 0, config 1
usblp 3-1.2:1.1: usblp3: USB Bidirectional printer dev 48 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1779
usblp 3-1.2:1.2: usblp4: USB Bidirectional printer dev 48 if 2 alt 0 proto 2 vid 0x04A9 pid 0x1779
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 3:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 3:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend of devices complete after 77.369 msecs
PM: late suspend of devices complete after 0.324 msecs
xhci_hcd 0000:09:00.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 15.655 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
Broke affinity for irq 23
smpboot: CPU 2 is now offline
Broke affinity for irq 23
Broke affinity for irq 36
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
microcode: CPU0 microcode updated early to revision 0x1c, date = 2014-07-03
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
microcode: CPU1 microcode updated early to revision 0x1c, date = 2014-07-03
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
microcode: CPU2 microcode updated early to revision 0x1c, date = 2014-07-03
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
microcode: CPU3 microcode updated early to revision 0x1c, date = 2014-07-03
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
xhci_hcd 0000:09:00.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 13.592 msecs
PM: early resume of devices complete after 0.273 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
rtc_cmos 00:02: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
sd 3:0:0:0: [sdb] Starting disk
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
usb 3-1: reset full-speed USB device number 36 using xhci_hcd
usb 3-1: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
usb 3-2: reset full-speed USB device number 20 using xhci_hcd
usb 3-1.4: reset full-speed USB device number 47 using xhci_hcd
usb 3-1.3: reset low-speed USB device number 41 using xhci_hcd
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
usb 3-1.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-1.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-1.2: reset full-speed USB device number 48 using xhci_hcd
usb 3-1.2: ep 0x89 - rounding interval to 64 microframes, ep desc says 88 microframes
usblp3: removed
usblp4: removed
usb 3-1.1: reset full-speed USB device number 37 using xhci_hcd
PM: resume of devices complete after 2172.234 msecs
usblp 3-1.2:1.1: usblp3: USB Bidirectional printer dev 48 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1779
usblp 3-1.2:1.2: usblp4: USB Bidirectional printer dev 48 if 2 alt 0 proto 2 vid 0x04A9 pid 0x1779
PM: Finishing wakeup.
Restarting tasks ...
pci_bus 0000:04: Allocating resources
pcieport 0000:03:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-08] add_size 200000 add_align 100000
pcieport 0000:03:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:03:00.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:03:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pcieport 0000:03:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pcieport 0000:03:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pcieport 0000:03:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
done.
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
ata1: link is slow to respond, please be patient (ready=0)
usb 3-1.2: USB disconnect, device number 48
usblp3: removed
usblp4: removed
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
usb 3-1.4: USB disconnect, device number 47
usb 3-1.4: new full-speed USB device number 49 using xhci_hcd
usb 3-1.4: New USB device found, idVendor=046d, idProduct=0a02
usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.4: Product: Logitech USB Headset
usb 3-1.4: Manufacturer: Logitech
usb 3-1.4: Warning! Unlikely big volume range (=464), cval->res is probably wrong.
usb 3-1.4: [6] FU [Mic Playback Volume] ch = 1, val = -10496/-3072/16
input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:1c.6/0000:09:00.0/usb3/3-1/3-1.4/3-1.4:1.3/0003:046D:0A02.0028/input/input138
hid-generic 0003:046D:0A02.0028: input,hidraw4: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:09:00.0-1.4/input3
usb 3-1.4: USB disconnect, device number 49
usb 3-1.4: new full-speed USB device number 50 using xhci_hcd
usb 3-1.4: New USB device found, idVendor=046d, idProduct=0a02
usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.4: Product: Logitech USB Headset
usb 3-1.4: Manufacturer: Logitech
usb 3-1.4: Warning! Unlikely big volume range (=464), cval->res is probably wrong.
usb 3-1.4: [6] FU [Mic Playback Volume] ch = 1, val = -10496/-3072/16
input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:1c.6/0000:09:00.0/usb3/3-1/3-1.4/3-1.4:1.3/0003:046D:0A02.0029/input/input139
hid-generic 0003:046D:0A02.0029: input,hidraw4: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:09:00.0-1.4/input3
python3[8429]: segfault at 8 ip 00007f5d7ef62f36 sp 00007ffd59c11620 error 4 in libpython3.5m.so.1.0[7f5d7ee74000+258000]
python3[8451]: segfault at 8 ip 00007fb9f4691f36 sp 00007ffc79df3ac0 error 4 in libpython3.5m.so.1.0[7fb9f45a3000+258000]
python3[8464]: segfault at 8 ip 00007fa4bd129f36 sp 00007ffefb0c2ae0 error 4 in libpython3.5m.so.1.0[7fa4bd03b000+258000]
python3[9480]: segfault at 8 ip 00007fa53c1caf36 sp 00007ffd63a5fb40 error 4 in libpython3.5m.so.1.0[7fa53c0dc000+258000]
python3[19519]: segfault at 8 ip 00007f6d40f93f36 sp 00007ffdff365d70 error 4 in libpython3.5m.so.1.0[7f6d40ea5000+258000]
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 3:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 3:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend of devices complete after 77.111 msecs
PM: late suspend of devices complete after 0.312 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
xhci_hcd 0000:09:00.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 15.670 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
Broke affinity for irq 23
Broke affinity for irq 31
Broke affinity for irq 36
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
microcode: CPU0 microcode updated early to revision 0x1c, date = 2014-07-03
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
microcode: CPU1 microcode updated early to revision 0x1c, date = 2014-07-03
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
microcode: CPU2 microcode updated early to revision 0x1c, date = 2014-07-03
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
microcode: CPU3 microcode updated early to revision 0x1c, date = 2014-07-03
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
xhci_hcd 0000:09:00.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 13.579 msecs
PM: early resume of devices complete after 0.233 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
rtc_cmos 00:02: System wakeup disabled by ACPI
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
sd 0:0:0:0: [sda] Starting disk
sd 3:0:0:0: [sdb] Starting disk
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
usb 3-1: reset full-speed USB device number 36 using xhci_hcd
usb 3-1: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
usb 3-2: reset full-speed USB device number 20 using xhci_hcd
usb 3-1.3: reset low-speed USB device number 41 using xhci_hcd
usb 3-1.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-1.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-1.4: reset full-speed USB device number 50 using xhci_hcd
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
usb 3-1.1: reset full-speed USB device number 37 using xhci_hcd
PM: resume of devices complete after 1980.234 msecs
PM: Finishing wakeup.
Restarting tasks ...
pci_bus 0000:04: Allocating resources
pcieport 0000:03:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-08] add_size 200000 add_align 100000
pcieport 0000:03:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:03:00.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:03:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pcieport 0000:03:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pcieport 0000:03:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pcieport 0000:03:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
done.
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
ata1: link is slow to respond, please be patient (ready=0)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
usb 3-1.4: USB disconnect, device number 50
usb 3-1.4: new full-speed USB device number 51 using xhci_hcd
usb 3-1.4: New USB device found, idVendor=046d, idProduct=0a02
usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.4: Product: Logitech USB Headset
usb 3-1.4: Manufacturer: Logitech
usb 3-1.4: Warning! Unlikely big volume range (=464), cval->res is probably wrong.
usb 3-1.4: [6] FU [Mic Playback Volume] ch = 1, val = -10496/-3072/16
input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:1c.6/0000:09:00.0/usb3/3-1/3-1.4/3-1.4:1.3/0003:046D:0A02.002A/input/input143
hid-generic 0003:046D:0A02.002A: input,hidraw4: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:09:00.0-1.4/input3
usb 3-1.4: USB disconnect, device number 51
usb 3-1.4: new full-speed USB device number 52 using xhci_hcd
usb 3-1.4: New USB device found, idVendor=046d, idProduct=0a02
usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.4: Product: Logitech USB Headset
usb 3-1.4: Manufacturer: Logitech
usb 3-1.4: Warning! Unlikely big volume range (=464), cval->res is probably wrong.
usb 3-1.4: [6] FU [Mic Playback Volume] ch = 1, val = -10496/-3072/16
input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:1c.6/0000:09:00.0/usb3/3-1/3-1.4/3-1.4:1.3/0003:046D:0A02.002B/input/input144
hid-generic 0003:046D:0A02.002B: input,hidraw4: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:09:00.0-1.4/input3
usb 3-1.4: USB disconnect, device number 52
usb 3-1.4: new full-speed USB device number 53 using xhci_hcd
usb 3-1.4: New USB device found, idVendor=046d, idProduct=0a02
usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.4: Product: Logitech USB Headset
usb 3-1.4: Manufacturer: Logitech
usb 3-1.4: Warning! Unlikely big volume range (=464), cval->res is probably wrong.
usb 3-1.4: [6] FU [Mic Playback Volume] ch = 1, val = -10496/-3072/16
input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:1c.6/0000:09:00.0/usb3/3-1/3-1.4/3-1.4:1.3/0003:046D:0A02.002C/input/input145
hid-generic 0003:046D:0A02.002C: input,hidraw4: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:09:00.0-1.4/input3
usb 3-1.4: 2:1: usb_set_interface failed (-71)
usb 3-1.4: 2:1: usb_set_interface failed (-71)
usb 3-1.4: 2:1: usb_set_interface failed (-71)
usb 3-1.4: 2:1: usb_set_interface failed (-71)
usb 3-1.4: 2:1: usb_set_interface failed (-71)
xhci_hcd 0000:09:00.0: URB transfer length is wrong, xHC issue? req. len = 0, act. len = 4294967288
usb 3-1.4: 2:1: cannot set freq 44100 to ep 0x84
usb 3-1.4: 2:1: cannot set freq 44100 to ep 0x84
usb 3-1.4: 2:1: cannot set freq 44100 to ep 0x84
usb 3-1.4: 2:1: cannot set freq 44100 to ep 0x84
usb 3-1.4: 2:1: cannot set freq 44100 to ep 0x84
usb 3-1.4: 2:1: usb_set_interface failed (-71)
usb 3-1.4: 2:1: usb_set_interface failed (-71)
usb 3-1.4: 2:1: usb_set_interface failed (-71)
usb 3-1.4: 2:1: usb_set_interface failed (-71)
usb 3-1.4: 2:1: usb_set_interface failed (-71)
usb 3-1.4: 2:1: usb_set_interface failed (-71)
usb 3-1.4: 2:1: usb_set_interface failed (-71)
usb 3-1.4: USB disconnect, device number 53
usb 3-1.4: 2:1: usb_set_interface failed (-19)
usb 3-1.4: 2:1: usb_set_interface failed (-19)
usb 3-1.4: 2:1: usb_set_interface failed (-19)
usb 3-1.4: 1:2: usb_set_interface failed (-19)
usb 3-1.4: 1:2: usb_set_interface failed (-19)
usb 3-1.4: 1:2: usb_set_interface failed (-19)
usb 3-1.4: 1:2: usb_set_interface failed (-19)
usb 3-1.4: 1:2: usb_set_interface failed (-19)
usb 3-1.4: 1:2: usb_set_interface failed (-19)
usb 3-1.4: 1:2: usb_set_interface failed (-19)
usb 3-1.4: 1:2: usb_set_interface failed (-19)
usb 3-1.4: 1:2: usb_set_interface failed (-19)
usb 3-1.4: 1:2: usb_set_interface failed (-19)
usb 3-1.4: 1:2: usb_set_interface failed (-19)
usb 3-1.4: 1:2: usb_set_interface failed (-19)
usb 3-1.4: 1:2: usb_set_interface failed (-19)
usb 3-1.4: 1:2: usb_set_interface failed (-19)
usb 3-1.4: 1:2: usb_set_interface failed (-19)
usb 3-1.4: 1:2: usb_set_interface failed (-19)
usb 3-1.4: 1:2: usb_set_interface failed (-19)
usb 3-1.4: 1:2: usb_set_interface failed (-19)
usb 3-1.4: 1:2: usb_set_interface failed (-19)
usb 3-1.4: 1:2: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: 1:1: usb_set_interface failed (-19)
usb 3-1.4: new full-speed USB device number 54 using xhci_hcd
usb 3-1.4: New USB device found, idVendor=046d, idProduct=0a02
usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.4: Product: Logitech USB Headset
usb 3-1.4: Manufacturer: Logitech
usb 3-1.4: Warning! Unlikely big volume range (=464), cval->res is probably wrong.
usb 3-1.4: [6] FU [Mic Playback Volume] ch = 1, val = -10496/-3072/16
input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:1c.6/0000:09:00.0/usb3/3-1/3-1.4/3-1.4:1.3/0003:046D:0A02.002D/input/input146
hid-generic 0003:046D:0A02.002D: input,hidraw4: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:09:00.0-1.4/input3
usb 3-1.4: USB disconnect, device number 54
usb 3-1.4: new full-speed USB device number 55 using xhci_hcd
usb 3-1.4: New USB device found, idVendor=046d, idProduct=0a02
usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.4: Product: Logitech USB Headset
usb 3-1.4: Manufacturer: Logitech
usb 3-1.4: Warning! Unlikely big volume range (=464), cval->res is probably wrong.
usb 3-1.4: [6] FU [Mic Playback Volume] ch = 1, val = -10496/-3072/16
input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:1c.6/0000:09:00.0/usb3/3-1/3-1.4/3-1.4:1.3/0003:046D:0A02.002E/input/input147
hid-generic 0003:046D:0A02.002E: input,hidraw4: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:09:00.0-1.4/input3
usb 3-1.4: USB disconnect, device number 55
usb 3-1.4: new full-speed USB device number 56 using xhci_hcd
usb 3-1.4: New USB device found, idVendor=046d, idProduct=0a02
usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.4: Product: Logitech USB Headset
usb 3-1.4: Manufacturer: Logitech
usb 3-1.4: Warning! Unlikely big volume range (=464), cval->res is probably wrong.
usb 3-1.4: [6] FU [Mic Playback Volume] ch = 1, val = -10496/-3072/16
input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:1c.6/0000:09:00.0/usb3/3-1/3-1.4/3-1.4:1.3/0003:046D:0A02.002F/input/input148
hid-generic 0003:046D:0A02.002F: input,hidraw4: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:09:00.0-1.4/input3
usb 3-1.4: USB disconnect, device number 56
usb 3-1.4: new full-speed USB device number 57 using xhci_hcd
usb 3-1.4: New USB device found, idVendor=046d, idProduct=0a02
usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.4: Product: Logitech USB Headset
usb 3-1.4: Manufacturer: Logitech
usb 3-1.4: Warning! Unlikely big volume range (=464), cval->res is probably wrong.
usb 3-1.4: [6] FU [Mic Playback Volume] ch = 1, val = -10496/-3072/16
input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:1c.6/0000:09:00.0/usb3/3-1/3-1.4/3-1.4:1.3/0003:046D:0A02.0030/input/input149
hid-generic 0003:046D:0A02.0030: input,hidraw4: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:09:00.0-1.4/input3
usb 3-1.4: USB disconnect, device number 57
usb 3-1.4: new full-speed USB device number 58 using xhci_hcd
usb 3-1.4: New USB device found, idVendor=046d, idProduct=0a02
usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.4: Product: Logitech USB Headset
usb 3-1.4: Manufacturer: Logitech
usb 3-1.4: Warning! Unlikely big volume range (=464), cval->res is probably wrong.
usb 3-1.4: [6] FU [Mic Playback Volume] ch = 1, val = -10496/-3072/16
input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:1c.6/0000:09:00.0/usb3/3-1/3-1.4/3-1.4:1.3/0003:046D:0A02.0031/input/input150
hid-generic 0003:046D:0A02.0031: input,hidraw4: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:09:00.0-1.4/input3
usb 1-9: new high-speed USB device number 2 using xhci_hcd
usb 1-9: New USB device found, idVendor=04e8, idProduct=6860
usb 1-9: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-9: Product: SAMSUNG_Android
usb 1-9: Manufacturer: SAMSUNG
usb 1-9: SerialNumber: 3100143032466200
usb 1-9: USB disconnect, device number 2
usb 1-9: new high-speed USB device number 3 using xhci_hcd
usb 1-9: New USB device found, idVendor=04e8, idProduct=6860
usb 1-9: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-9: Product: SAMSUNG_Android
usb 1-9: Manufacturer: SAMSUNG
usb 1-9: SerialNumber: 3100143032466200
usb 3-1.4: USB disconnect, device number 58
usb 3-1.4: new full-speed USB device number 59 using xhci_hcd
usb 3-1.4: New USB device found, idVendor=046d, idProduct=0a02
usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.4: Product: Logitech USB Headset
usb 3-1.4: Manufacturer: Logitech
usb 3-1.4: Warning! Unlikely big volume range (=464), cval->res is probably wrong.
usb 3-1.4: [6] FU [Mic Playback Volume] ch = 1, val = -10496/-3072/16
input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:1c.6/0000:09:00.0/usb3/3-1/3-1.4/3-1.4:1.3/0003:046D:0A02.0032/input/input151
hid-generic 0003:046D:0A02.0032: input,hidraw4: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:09:00.0-1.4/input3
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
usb 3-1.4: USB disconnect, device number 59
usb 3-1.4: new full-speed USB device number 60 using xhci_hcd
usb 3-1.4: New USB device found, idVendor=046d, idProduct=0a02
usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.4: Product: Logitech USB Headset
usb 3-1.4: Manufacturer: Logitech
usb 3-1.4: Warning! Unlikely big volume range (=464), cval->res is probably wrong.
usb 3-1.4: [6] FU [Mic Playback Volume] ch = 1, val = -10496/-3072/16
input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:1c.6/0000:09:00.0/usb3/3-1/3-1.4/3-1.4:1.3/0003:046D:0A02.0033/input/input152
hid-generic 0003:046D:0A02.0033: input,hidraw4: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:09:00.0-1.4/input3
usb 3-1.4: USB disconnect, device number 60
usb 3-1.4: new full-speed USB device number 61 using xhci_hcd
usb 3-1.4: New USB device found, idVendor=046d, idProduct=0a02
usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.4: Product: Logitech USB Headset
usb 3-1.4: Manufacturer: Logitech
usb 3-1.4: Warning! Unlikely big volume range (=464), cval->res is probably wrong.
usb 3-1.4: [6] FU [Mic Playback Volume] ch = 1, val = -10496/-3072/16
input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:1c.6/0000:09:00.0/usb3/3-1/3-1.4/3-1.4:1.3/0003:046D:0A02.0034/input/input153
hid-generic 0003:046D:0A02.0034: input,hidraw4: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:09:00.0-1.4/input3
usb 1-9: usbfs: process 31471 (events) did not claim interface 0 before use
usb 1-9: USB disconnect, device number 3
usb 3-1.4: USB disconnect, device number 61
usb 3-1.4: new full-speed USB device number 62 using xhci_hcd
usb 3-1.4: New USB device found, idVendor=046d, idProduct=0a02
usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.4: Product: Logitech USB Headset
usb 3-1.4: Manufacturer: Logitech
usb 3-1.4: Warning! Unlikely big volume range (=464), cval->res is probably wrong.
usb 3-1.4: [6] FU [Mic Playback Volume] ch = 1, val = -10496/-3072/16
input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:1c.6/0000:09:00.0/usb3/3-1/3-1.4/3-1.4:1.3/0003:046D:0A02.0035/input/input154
hid-generic 0003:046D:0A02.0035: input,hidraw4: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:09:00.0-1.4/input3
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 3:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 3:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend of devices complete after 78.550 msecs
PM: late suspend of devices complete after 0.319 msecs
xhci_hcd 0000:09:00.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 15.664 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
Broke affinity for irq 30
smpboot: CPU 2 is now offline
Broke affinity for irq 23
Broke affinity for irq 30
Broke affinity for irq 36
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
microcode: CPU0 microcode updated early to revision 0x1c, date = 2014-07-03
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
microcode: CPU1 microcode updated early to revision 0x1c, date = 2014-07-03
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
microcode: CPU2 microcode updated early to revision 0x1c, date = 2014-07-03
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
microcode: CPU3 microcode updated early to revision 0x1c, date = 2014-07-03
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
xhci_hcd 0000:09:00.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 13.595 msecs
PM: early resume of devices complete after 0.244 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
rtc_cmos 00:02: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
sd 3:0:0:0: [sdb] Starting disk
ata8: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
usb 3-2: reset full-speed USB device number 20 using xhci_hcd
usb 3-1: reset full-speed USB device number 36 using xhci_hcd
usb 3-1: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
usb 3-1.3: reset low-speed USB device number 41 using xhci_hcd
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
usb 3-1.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-1.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-1.1: reset full-speed USB device number 37 using xhci_hcd
PM: resume of devices complete after 2016.205 msecs
PM: Finishing wakeup.
Restarting tasks ...
pci_bus 0000:04: Allocating resources
pcieport 0000:03:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-08] add_size 200000 add_align 100000
pcieport 0000:03:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:03:00.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:03:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pcieport 0000:03:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pcieport 0000:03:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pcieport 0000:03:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
usb 3-1.4: USB disconnect, device number 62
done.
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
ata1: link is slow to respond, please be patient (ready=0)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
usb 3-1.2: new full-speed USB device number 63 using xhci_hcd
usb 3-1.2: not running at top speed; connect to a high speed hub
usb 3-1.2: New USB device found, idVendor=04a9, idProduct=1779
usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.2: Product: MB2300 series
usb 3-1.2: Manufacturer: Canon
usb 3-1.2: SerialNumber: 116D09
usb 3-1.2: ep 0x89 - rounding interval to 64 microframes, ep desc says 88 microframes
usblp 3-1.2:1.1: usblp3: USB Bidirectional printer dev 63 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1779
usblp 3-1.2:1.2: usblp4: USB Bidirectional printer dev 63 if 2 alt 0 proto 2 vid 0x04A9 pid 0x1779
usblp3: removed
usblp 3-1.2:1.1: usblp3: USB Bidirectional printer dev 63 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1779
usblp4: removed
usblp 3-1.2:1.2: usblp4: USB Bidirectional printer dev 63 if 2 alt 0 proto 2 vid 0x04A9 pid 0x1779
usblp3: removed
Did not find alt setting 1 for intf 0, config 1
usblp4: removed
Did not find alt setting 2 for intf 0, config 1
usblp 3-1.2:1.1: usblp3: USB Bidirectional printer dev 63 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1779
usblp 3-1.2:1.2: usblp4: USB Bidirectional printer dev 63 if 2 alt 0 proto 2 vid 0x04A9 pid 0x1779
usb 3-1.2: USB disconnect, device number 63
usblp3: removed
usblp4: removed
usb 3-1.4: new full-speed USB device number 64 using xhci_hcd
usb 3-1.4: New USB device found, idVendor=046d, idProduct=0a02
usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.4: Product: Logitech USB Headset
usb 3-1.4: Manufacturer: Logitech
usb 3-1.4: Warning! Unlikely big volume range (=464), cval->res is probably wrong.
usb 3-1.4: [6] FU [Mic Playback Volume] ch = 1, val = -10496/-3072/16
input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:1c.6/0000:09:00.0/usb3/3-1/3-1.4/3-1.4:1.3/0003:046D:0A02.0036/input/input158
hid-generic 0003:046D:0A02.0036: input,hidraw4: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:09:00.0-1.4/input3
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 3:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 3:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend of devices complete after 78.137 msecs
PM: late suspend of devices complete after 0.319 msecs
xhci_hcd 0000:09:00.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 15.662 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
Broke affinity for irq 30
smpboot: CPU 2 is now offline
Broke affinity for irq 23
Broke affinity for irq 30
Broke affinity for irq 36
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
microcode: CPU0 microcode updated early to revision 0x1c, date = 2014-07-03
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
microcode: CPU1 microcode updated early to revision 0x1c, date = 2014-07-03
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
microcode: CPU2 microcode updated early to revision 0x1c, date = 2014-07-03
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
microcode: CPU3 microcode updated early to revision 0x1c, date = 2014-07-03
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
xhci_hcd 0000:09:00.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 13.590 msecs
PM: early resume of devices complete after 0.209 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
rtc_cmos 00:02: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
sd 3:0:0:0: [sdb] Starting disk
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
usb 3-2: reset full-speed USB device number 20 using xhci_hcd
usb 3-1: reset full-speed USB device number 36 using xhci_hcd
usb 3-1: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
usb 3-1.3: reset low-speed USB device number 41 using xhci_hcd
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
usb 3-1.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-1.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-1.4: reset full-speed USB device number 64 using xhci_hcd
usb 3-1.1: reset full-speed USB device number 37 using xhci_hcd
PM: resume of devices complete after 2192.386 msecs
PM: Finishing wakeup.
Restarting tasks ...
pci_bus 0000:04: Allocating resources
pcieport 0000:03:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-08] add_size 200000 add_align 100000
pcieport 0000:03:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:03:00.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:03:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pcieport 0000:03:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pcieport 0000:03:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pcieport 0000:03:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
done.
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
ata1: link is slow to respond, please be patient (ready=0)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
usb 3-1.4: USB disconnect, device number 64
usb 3-1.4: new full-speed USB device number 65 using xhci_hcd
usb 3-1.4: device descriptor read/all, error -71
usb 3-1.4: new full-speed USB device number 66 using xhci_hcd
usb 3-1.4: New USB device found, idVendor=046d, idProduct=0a02
usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.4: Product: Logitech USB Headset
usb 3-1.4: Manufacturer: Logitech
usb 3-1.4: Warning! Unlikely big volume range (=464), cval->res is probably wrong.
usb 3-1.4: [6] FU [Mic Playback Volume] ch = 1, val = -10496/-3072/16
input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:1c.6/0000:09:00.0/usb3/3-1/3-1.4/3-1.4:1.3/0003:046D:0A02.0037/input/input162
hid-generic 0003:046D:0A02.0037: input,hidraw4: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:09:00.0-1.4/input3
systemd-sysv-generator[24716]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[25528]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[25596]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[25696]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[25745]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[25776]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[25851]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[27017]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[27413]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[27442]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[27461]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[27480]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[27499]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[27518]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[27537]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[27556]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[27575]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[27594]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[27613]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[27632]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[27651]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[27670]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[27689]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[27708]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[27727]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[27746]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[27765]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[27784]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[27803]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[27822]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[27841]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[27861]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[27881]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[27901]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[27967]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[28478]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[28514]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[28531]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[28548]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[28565]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[28720]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[29913]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
systemd-sysv-generator[30013]: Overwriting existing symlink /run/systemd/generator.late/umountiscsi.service with real service
EXT4-fs (sda2): unable to read superblock
EXT4-fs (sda2): unable to read superblock
EXT4-fs (sda2): unable to read superblock
FAT-fs (sda2): invalid media value (0x1f)
FAT-fs (sda2): Can't find a valid FAT filesystem
XFS (sda2): Invalid superblock magic number
FAT-fs (sda2): invalid media value (0x1f)
FAT-fs (sda2): Can't find a valid FAT filesystem
MINIX-fs: unable to read superblock
attempt to access beyond end of device
sda2: rw=16, want=3, limit=2
hfsplus: unable to find HFS+ superblock
qnx4: no qnx4 filesystem (no root dir).
ufs: You didn't specify the type of your ufs filesystem
mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ...
>>>WARNING>WARNING