dmesg - kazeThinkAMD
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.0-32-generic (buildd@lgw01-43) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #37~14.04.1-Ubuntu SMP Thu Oct 22 09:41:40 UTC 2015 (Ubuntu 3.19.0-32.37~14.04.1-generic 3.19.8-ckt7)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
tseg: 00bf800000
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bb5abfff] usable
BIOS-e820: [mem 0x00000000bb5ac000-0x00000000be4abfff] reserved
BIOS-e820: [mem 0x00000000be4ac000-0x00000000be5dbfff] ACPI NVS
BIOS-e820: [mem 0x00000000be5dc000-0x00000000be65bfff] ACPI data
BIOS-e820: [mem 0x00000000be65c000-0x00000000bf7fffff] usable
BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fecfffff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: LENOVO 20ED001HUS/20ED001HUS, BIOS JIET22WW (1.07 ) 07/24/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x11f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFC0000000 write-back
2 base 00FED80000 mask FFFFFFF000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 base 00FF800000 mask FFFF800000 write-protect
TOM2: 000000011f000000 aka 4592M
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
init_memory_mapping: [mem 0x11ee00000-0x11effffff]
[mem 0x11ee00000-0x11effffff] page 2M
BRK [0x01fd7000, 0x01fd7fff] PGTABLE
init_memory_mapping: [mem 0x100000000-0x11edfffff]
[mem 0x100000000-0x11edfffff] page 2M
init_memory_mapping: [mem 0xa0000000-0xbb5abfff]
[mem 0xa0000000-0xbb3fffff] page 2M
[mem 0xbb400000-0xbb5abfff] page 4k
BRK [0x01fd8000, 0x01fd8fff] PGTABLE
BRK [0x01fd9000, 0x01fd9fff] PGTABLE
init_memory_mapping: [mem 0xbe65c000-0xbf7fffff]
[mem 0xbe65c000-0xbe7fffff] page 4k
[mem 0xbe800000-0xbf7fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x9fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0x9fffffff] page 2M
RAMDISK: [mem 0x34aa6000-0x3654afff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000BE65B200 0000BC (v01 LENOVO TP-JI 00001070 PTEC 00000002)
ACPI: FACP 0x00000000BE659000 00010C (v05 LENOVO TP-JI 00001070 PTEC 00000002)
ACPI: DSDT 0x00000000BE648000 00CBCD (v01 LENOVO AMD 00001000 INTL 20110316)
ACPI: FACS 0x00000000BE597000 000040
ACPI: HPET 0x00000000BE658000 000038 (v01 LENOVO TP-JI 00001070 PTEC 00000002)
ACPI: APIC 0x00000000BE657000 000090 (v02 LENOVO TP-JI 00001070 PTEC 00000002)
ACPI: MCFG 0x00000000BE656000 00003C (v01 LENOVO TP-JI 00001070 PTEC 00000002)
ACPI: SBST 0x00000000BE655000 000030 (v01 LENOVO TP-JI 00001070 PTEC 00000002)
ACPI: SLIC 0x00000000BE647000 000176 (v01 LENOVO TP-JI 00001070 PTEC 00000002)
ACPI: TCPA 0x00000000BE646000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001)
ACPI: SSDT 0x00000000BE645000 0006B8 (v01 Intel_ TpmTable 00001000 INTL 20110316)
ACPI: FPDT 0x00000000BE644000 000064 (v01 LENOVO TP-JI 00001070 PTEC 00000002)
ACPI: UEFI 0x00000000BE643000 000042 (v01 LENOVO TP-JI 00001070 PTEC 00000002)
ACPI: MSDM 0x00000000BE4E3000 000055 (v03 LENOVO TP-JI 00001070 PTEC 00000002)
ACPI: BATB 0x00000000BE642000 000046 (v01 LENOVO TP-JI 00001070 PTEC 00000002)
ACPI: SSDT 0x00000000BE641000 000C84 (v01 AMD AGESA 00000001 AMD 00000001)
ACPI: SSDT 0x00000000BE63C000 00489D (v02 AMD AGESA 00000002 MSFT 04000000)
ACPI: UEFI 0x00000000BE63B000 0002E2 (v01 LENOVO TP-JI 00001070 PTEC 00000002)
ACPI: SSDT 0x00000000BE63A000 000141 (v01 AMD CPMEC 00000001 INTL 20110316)
ACPI: SSDT 0x00000000BE639000 000418 (v01 AMD CPMXPRES 00000001 INTL 20110316)
ACPI: SSDT 0x00000000BE637000 0013C2 (v01 AMD CPMDFIGP 00000001 INTL 20110316)
ACPI: SSDT 0x00000000BE635000 001138 (v01 AMD CPMCMN 00000001 INTL 20110316)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000011effffff]
NODE_DATA(0) allocated [mem 0x11effa000-0x11effefff]
[ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011ae00000-ffff88011e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x11effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0xbb5abfff]
node 0: [mem 0xbe65c000-0xbf7fffff]
node 0: [mem 0x100000000-0x11effffff]
Initmem setup node 0 [mem 0x00001000-0x11effffff]
On node 0 totalpages: 898797
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 11998 pages used for memmap
DMA32 zone: 767824 pages, LIFO batch:31
Normal zone: 1984 pages used for memmap
Normal zone: 126976 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x05] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbb5ac000-0xbe4abfff]
PM: Registered nosave memory: [mem 0xbe4ac000-0xbe5dbfff]
PM: Registered nosave memory: [mem 0xbe5dc000-0xbe65bfff]
PM: Registered nosave memory: [mem 0xbf800000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
PM: Registered nosave memory: [mem 0xfed81000-0xff7fffff]
PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
e820: [mem 0xc0000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88011ec00000 s86144 r8192 d32640 u524288
pcpu-alloc: s86144 r8192 d32640 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 884730
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
AGP: Your BIOS doesn't leave a aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0xb0000000-0xb3ffffff] (65536KB)
PM: Registered nosave memory: [mem 0xb0000000-0xb3ffffff]
Memory: 3361880K/3595188K available (7920K kernel code, 1174K rwdata, 3756K rodata, 1408K init, 1292K bss, 233308K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:1000 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1796.801 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3593.60 BogoMIPS (lpj=7187204)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffff81e87000 - ffffffff81e8f000)
ftrace: allocating 30021 entries in 118 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A4-6210 APU with AMD Radeon R3 Graphics (fam: 16, model: 30, stepping: 01)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1
TSC synchronization [CPU#0 -> CPU#1]:
Measured 49154284 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
#2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (14374.40 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xbe4ac000-0xbe5dbfff] (1245184 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 17:08:45, date: 02/13/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI Error: [TPME] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.TPM_._STA] (Node ffff88011a8ba5a0), AE_NOT_FOUND (20141107/psparse-536)
ACPI Error: [TPME] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.TPM_._STA] (Node ffff88011a8ba5a0), AE_NOT_FOUND (20141107/psparse-536)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PME]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability]
acpi PNP0A08:00: ignoring host bridge window [mem 0x000ce000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cebff])
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c1fff]
pci_bus 0000:00: root bus resource [mem 0x000c2000-0x000c3fff]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c5fff]
pci_bus 0000:00: root bus resource [mem 0x000c6000-0x000c7fff]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000c9fff]
pci_bus 0000:00: root bus resource [mem 0x000ca000-0x000cbfff]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cdfff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d1fff]
pci_bus 0000:00: root bus resource [mem 0x000d2000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d5fff]
pci_bus 0000:00: root bus resource [mem 0x000d6000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000d9fff]
pci_bus 0000:00: root bus resource [mem 0x000da000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000ddfff]
pci_bus 0000:00: root bus resource [mem 0x000de000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e1fff]
pci_bus 0000:00: root bus resource [mem 0x000e2000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e5fff]
pci_bus 0000:00: root bus resource [mem 0x000e6000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000e9fff]
pci_bus 0000:00: root bus resource [mem 0x000ea000-0x000ebfff]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000edfff]
pci_bus 0000:00: root bus resource [mem 0x000ee000-0x000effff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff]
pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfdffffff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci 0000:00:00.0: [1022:1566] type 00 class 0x060000
pci 0000:00:01.0: [1002:9850] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
pci 0000:00:01.0: reg 0x20: [io 0x3000-0x30ff]
pci 0000:00:01.0: reg 0x24: [mem 0xf1700000-0xf173ffff]
pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.0: PME# supported from D1 D2 D3hot
pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xf1760000-0xf1763fff 64bit]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:02.0: [1022:156b] type 00 class 0x060000
pci 0000:00:02.2: [1022:1439] type 01 class 0x060400
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: System wakeup disabled by ACPI
pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.3: System wakeup disabled by ACPI
pci 0000:00:08.0: [1022:1537] type 00 class 0x108000
pci 0000:00:08.0: reg 0x10: [mem 0xf1740000-0xf175ffff 64bit pref]
pci 0000:00:08.0: reg 0x18: [mem 0xf0e00000-0xf0efffff]
pci 0000:00:08.0: reg 0x1c: [mem 0xf176c000-0xf176cfff]
pci 0000:00:08.0: reg 0x24: [mem 0xf176a000-0xf176bfff]
pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xf1768000-0xf1769fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0x3118-0x311f]
pci 0000:00:11.0: reg 0x14: [io 0x3124-0x3127]
pci 0000:00:11.0: reg 0x18: [io 0x3110-0x3117]
pci 0000:00:11.0: reg 0x1c: [io 0x3120-0x3123]
pci 0000:00:11.0: reg 0x20: [io 0x3100-0x310f]
pci 0000:00:11.0: reg 0x24: [mem 0xf176d000-0xf176d3ff]
pci 0000:00:11.0: PME# supported from D3hot
pci 0000:00:12.0: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.0: reg 0x10: [mem 0xf176d500-0xf176d5ff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:13.0: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.0: reg 0x10: [mem 0xf176d400-0xf176d4ff]
pci 0000:00:13.0: supports D1 D2
pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xf1764000-0xf1767fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1580] type 00 class 0x060000
pci 0000:00:18.1: [1022:1581] type 00 class 0x060000
pci 0000:00:18.2: [1022:1582] type 00 class 0x060000
pci 0000:00:18.3: [1022:1583] type 00 class 0x060000
pci 0000:00:18.4: [1022:1584] type 00 class 0x060000
pci 0000:00:18.5: [1022:1585] type 00 class 0x060000
pci 0000:01:00.0: [14e4:43b1] type 00 class 0x028000
pci 0000:01:00.0: reg 0x10: [mem 0xf0a00000-0xf0a07fff 64bit]
pci 0000:01:00.0: reg 0x18: [mem 0xf0800000-0xf09fffff 64bit]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.2: PCI bridge to [bus 01-02]
pci 0000:00:02.2: bridge window [io 0x2000-0x2fff]
pci 0000:00:02.2: bridge window [mem 0xf0800000-0xf0bfffff]
pci 0000:00:02.2: bridge window [mem 0xf0c00000-0xf0cfffff 64bit pref]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff]
pci 0000:03:00.0: reg 0x18: [mem 0xf0f04000-0xf0f04fff 64bit]
pci 0000:03:00.0: reg 0x20: [mem 0xf0f00000-0xf0f03fff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.3: PCI bridge to [bus 03]
pci 0000:00:02.3: bridge window [io 0x1000-0x1fff]
pci 0000:00:02.3: bridge window [mem 0xf0f00000-0xf16fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: IRQ 7 override to edge, high
ACPI Error: [TPME] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.TPM_._STA] (Node ffff88011a8ba5a0), AE_NOT_FOUND (20141107/psparse-536)
ACPI: Enabled 3 GPEs in block 00 to 1F
ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:01.0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0xbb5ac000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0f50-0x0f51] has been reserved
system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
pnp 00:03: Plug and Play ACPI device, IDs LEN2010 PNP0f13 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x0530-0x0537] has been reserved
system 00:04: [io 0x0800-0x0827] could not be reserved
system 00:04: [io 0x0830] has been reserved
system 00:04: [io 0x0840-0x0847] has been reserved
system 00:04: [io 0x0b00-0x0b1f] has been reserved
system 00:04: [io 0x0c00-0x0c01] has been reserved
system 00:04: [io 0x0c14] has been reserved
system 00:04: [io 0x0c50-0x0c52] has been reserved
system 00:04: [io 0x0cd0-0x0cd1] has been reserved
system 00:04: [io 0x0cd2-0x0cd3] has been reserved
system 00:04: [io 0x0cd4-0x0cd5] has been reserved
system 00:04: [io 0x0cd6-0x0cd7] has been reserved
system 00:04: [io 0x0cd8-0x0cdf] has been reserved
system 00:04: [io 0x0cf9] could not be reserved
system 00:04: [io 0x8100-0x81ff window] has been reserved
system 00:04: [io 0x8200-0x82ff window] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:05: [mem 0xff800000-0xffffffff] has been reserved
system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:05: [mem 0xfed61000-0xfed613ff] has been reserved
system 00:05: [mem 0xfed80000-0xfed80fff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
ACPI Error: [TPME] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.TPM_._STA] (Node ffff88011a8ba5a0), AE_NOT_FOUND (20141107/psparse-536)
pnp 00:06: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
pnp: PnP ACPI: found 7 devices
pci 0000:00:01.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
pci 0000:00:01.0: BAR 6: assigned [mem 0xf0d00000-0xf0d1ffff pref]
pci 0000:00:02.2: PCI bridge to [bus 01-02]
pci 0000:00:02.2: bridge window [io 0x2000-0x2fff]
pci 0000:00:02.2: bridge window [mem 0xf0800000-0xf0bfffff]
pci 0000:00:02.2: bridge window [mem 0xf0c00000-0xf0cfffff 64bit pref]
pci 0000:00:02.3: PCI bridge to [bus 03]
pci 0000:00:02.3: bridge window [io 0x1000-0x1fff]
pci 0000:00:02.3: bridge window [mem 0xf0f00000-0xf16fffff]
pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 5 [mem 0x000c0000-0x000c1fff]
pci_bus 0000:00: resource 6 [mem 0x000c2000-0x000c3fff]
pci_bus 0000:00: resource 7 [mem 0x000c4000-0x000c5fff]
pci_bus 0000:00: resource 8 [mem 0x000c6000-0x000c7fff]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000c9fff]
pci_bus 0000:00: resource 10 [mem 0x000ca000-0x000cbfff]
pci_bus 0000:00: resource 11 [mem 0x000cc000-0x000cdfff]
pci_bus 0000:00: resource 12 [mem 0x000d0000-0x000d1fff]
pci_bus 0000:00: resource 13 [mem 0x000d2000-0x000d3fff]
pci_bus 0000:00: resource 14 [mem 0x000d4000-0x000d5fff]
pci_bus 0000:00: resource 15 [mem 0x000d6000-0x000d7fff]
pci_bus 0000:00: resource 16 [mem 0x000d8000-0x000d9fff]
pci_bus 0000:00: resource 17 [mem 0x000da000-0x000dbfff]
pci_bus 0000:00: resource 18 [mem 0x000dc000-0x000ddfff]
pci_bus 0000:00: resource 19 [mem 0x000de000-0x000dffff]
pci_bus 0000:00: resource 20 [mem 0x000e0000-0x000e1fff]
pci_bus 0000:00: resource 21 [mem 0x000e2000-0x000e3fff]
pci_bus 0000:00: resource 22 [mem 0x000e4000-0x000e5fff]
pci_bus 0000:00: resource 23 [mem 0x000e6000-0x000e7fff]
pci_bus 0000:00: resource 24 [mem 0x000e8000-0x000e9fff]
pci_bus 0000:00: resource 25 [mem 0x000ea000-0x000ebfff]
pci_bus 0000:00: resource 26 [mem 0x000ec000-0x000edfff]
pci_bus 0000:00: resource 27 [mem 0x000ee000-0x000effff]
pci_bus 0000:00: resource 28 [mem 0xe0000000-0xf7ffffff]
pci_bus 0000:00: resource 29 [mem 0xfc000000-0xfdffffff]
pci_bus 0000:00: resource 30 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 31 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xf0800000-0xf0bfffff]
pci_bus 0000:01: resource 2 [mem 0xf0c00000-0xf0cfffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:03: resource 1 [mem 0xf0f00000-0xf16fffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Video device with shadowed ROM
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 27284K (ffff880034aa6000 - ffff88003654b000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb75ac000-0xbb5ac000] (64MB) mapped at [ffff8800b75ac000-ffff8800bb5abfff]
perf: AMD NB counters detected
perf: AMD L2I counters detected
microcode: CPU0: patch_level=0x07030105
microcode: CPU1: patch_level=0x07030105
microcode: CPU2: patch_level=0x07030105
microcode: CPU3: patch_level=0x07030105
microcode: Microcode Update Driver: v2.00 , Peter Oruba
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1455383326.076:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1366x768x32, linelength=5632, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004780000, using 4224k, total 4224k
Console: switching to colour frame buffer device 170x48
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [ACAD] (off-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THZ0] (51 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
ACPI: Battery Slot [BAT1] (battery present)
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.19.0-32-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:10.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.19.0-32-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:10.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.0: EHCI Host Controller
ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:12.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.0: debug port 2
ehci-pci 0000:00:12.0: irq 18, io mem 0xf176d500
ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.19.0-32-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:13.0: EHCI Host Controller
ehci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.0: debug port 2
ehci-pci 0000:00:13.0: irq 18, io mem 0xf176d400
ehci-pci 0000:00:13.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 3.19.0-32-generic ehci_hcd
usb usb4: SerialNumber: 0000:00:13.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
ACPI PCC probe failed.
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Loaded X.509 cert 'Magrathea: Glacier signing key: 0c8befe0c1e289e4d8990926117ada3bdfeb419c'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
evm: HMAC attrs: 0x1
Magic number: 4:818:137
usb usb4-port2: hash matches
block ram2: hash matches
rtc_cmos 00:01: setting system clock to 2016-02-13 17:08:46 UTC (1455383326)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000)
Freeing unused kernel memory: 340K (ffff880001bab000 - ffff880001c00000)
systemd-udevd[123]: starting version 204
ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
acpi device:2f: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input6
wmi: Mapper loaded
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
scsi host0: ahci
ata1: SATA max UDMA/133 abar m1024@0xf176d000 port 0xf176d100 irq 32
r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffc9000001e000, 2c:60:0c:f8:a0:15, XID 10900800 IRQ 33
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
usb 1-1: new full-speed USB device number 2 using xhci_hcd
usb 3-1: new high-speed USB device number 2 using ehci-pci
usb 4-1: new high-speed USB device number 2 using ehci-pci
usb 3-1: New USB device found, idVendor=0438, idProduct=7900
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 4 ports detected
usb 4-1: New USB device found, idVendor=0438, idProduct=7900
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 4 ports detected
usb 1-1: New USB device found, idVendor=046d, idProduct=c52b
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: USB Receiver
usb 1-1: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:10.0-1/input2
usb 3-1.3: new full-speed USB device number 3 using ehci-pci
usb 4-1.2: new high-speed USB device number 3 using ehci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: disabling queued TRIM support
ata1.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT02B6Q, max UDMA/133
ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: disabling queued TRIM support
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
usb 3-1.3: New USB device found, idVendor=0489, idProduct=e07a
usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.3: Product: BCM20702A0
usb 3-1.3: Manufacturer: Broadcom Corp
usb 3-1.3: SerialNumber: ACD1B8E004C4
usb 4-1.2: New USB device found, idVendor=04f2, idProduct=b451
usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1.2: Product: Integrated Camera
usb 4-1.2: Manufacturer: SunplusIT Inc
psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4732]
psmouse serio1: synaptics: queried min coordinates: x [1356..], y [1214..]
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x12e800, board id: 2980, fw id: 1569351
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
random: init urandom read with 37 bits of entropy available
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
random: nonblocking pool is initialized
systemd-udevd[400]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
AMD Cryptographic Coprocessor 0000:00:08.0: 4 command queues available
AMD Cryptographic Coprocessor 0000:00:08.0: enabled
cfg80211: Calling CRDA to update world regulatory domain
media: Linux media interface: v0.10
ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0f (\_SB_.PCI0.SMB_.SMB0) (20141107/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Linux video capture interface: v2.00
MCE: In-kernel MCE decoding enabled.
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
wl: module verification failed: signature and/or required key missing - tainting kernel
Non-volatile memory driver v1.3
thinkpad_acpi: ThinkPad ACPI Extras v0.25
thinkpad_acpi:
thinkpad_acpi: ThinkPad BIOS JIET22WW (1.07 ), EC unknown
thinkpad_acpi: Lenovo ThinkPad 11e, model 20ED001HUS
uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b451)
input: Logitech M325 as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:400A.0004/input/input8
usbcore: registered new interface driver btusb
ACPI Warning: \_SB_.PCI0.GFX_.VGA_.LCD_._BCL: Return Package type mismatch at index 0 - found Buffer, expected Integer (20141107/nspredef-297)
thinkpad_acpi: detected a 8-level brightness capable ThinkPad
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
bluetooth hci0: Direct firmware load for brcm/BCM20702A0-0489-e07a.hcd failed with error -2
Bluetooth: hci0: BCM: patch brcm/BCM20702A0-0489-e07a.hcd not found
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
logitech-hidpp-device 0003:046D:400A.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M325] on usb-0000:00:10.0-1:1
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
input: Integrated Camera as /devices/pci0000:00/0000:00:13.0/usb4/4-1/4-1.2/4-1.2:1.0/input/input10
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9
init: cups main process (554) killed by HUP signal
init: cups main process ended, respawning
wlan0: Broadcom BCM43b1 802.11 Hybrid Wireless Controller 6.30.223.248 (r487574)
device-mapper: multipath: version 1.7.0 loaded
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
[fglrx] Maximum main memory to use for locked dma buffers: 3160 MBytes.
[fglrx] vendor: 1002 device: 9850 revision: 0 count: 1
[fglrx] ioport: bar 4, base 0x3000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 15.20.2 [Feb 27 2015] with 1 minors
snd_hda_intel 0000:00:01.1: Force to non-snoop mode
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input11
sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: mono: mono_out=0x0
sound hdaudioC1D0: inputs:
sound hdaudioC1D0: Mic=0x19
sound hdaudioC1D0: Internal Mic=0x12
input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
init: failsafe main process (711) killed by TERM signal
init: samba-ad-dc main process (754) terminated with status 1
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1219) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-stop pre-start process (1596) terminated with status 1
[fglrx] Firegl kernel thread PID: 1603
[fglrx] Firegl kernel thread PID: 1604
[fglrx] Firegl kernel thread PID: 1605
[fglrx] IRQ 40 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fba8000, size:4000
[fglrx] Reserved FB block: Unshared offset:fbac000, size:454000
[fglrx] Reserved FB block: Unshared offset:1ffdd000, size:23000
[fglrx] ATIF platform detected with notification ID: 0x81
perf interrupt took too long (2542 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf interrupt took too long (5010 > 5000), lowering kernel.perf_event_max_sample_rate to 25000