dmesg - openarena
microcode: CPU0 microcode updated early to revision 0x1e, date = 2015-08-13
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-4-lowlatency (buildd@lgw01-32) (gcc version 5.3.1 20160121 (Ubuntu 5.3.1-7ubuntu1) ) #19-Ubuntu SMP PREEMPT Fri Feb 5 18:51:32 UTC 2016 (Ubuntu 4.4.0-4.19-lowlatency 4.4.1)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000c8039fff] usable
BIOS-e820: [mem 0x00000000c803a000-0x00000000c8040fff] ACPI NVS
BIOS-e820: [mem 0x00000000c8041000-0x00000000c848bfff] usable
BIOS-e820: [mem 0x00000000c848c000-0x00000000c88e1fff] reserved
BIOS-e820: [mem 0x00000000c88e2000-0x00000000dd736fff] usable
BIOS-e820: [mem 0x00000000dd737000-0x00000000dd93ffff] reserved
BIOS-e820: [mem 0x00000000dd940000-0x00000000dd958fff] ACPI data
BIOS-e820: [mem 0x00000000dd959000-0x00000000dde96fff] ACPI NVS
BIOS-e820: [mem 0x00000000dde97000-0x00000000deffefff] reserved
BIOS-e820: [mem 0x00000000defff000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: ASUS All Series/Z87-C, BIOS 1802 01/28/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x41f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7C00000000 write-back
1 base 0400000000 mask 7FF0000000 write-back
2 base 0410000000 mask 7FF8000000 write-back
3 base 0418000000 mask 7FFC000000 write-back
4 base 041C000000 mask 7FFE000000 write-back
5 base 041E000000 mask 7FFF000000 write-back
6 base 00E0000000 mask 7FE0000000 uncachable
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 16GB, range: 256MB, type WB
reg 2, base: 16640MB, range: 128MB, type WB
reg 3, base: 16768MB, range: 64MB, type WB
reg 4, base: 16832MB, range: 32MB, type WB
reg 5, base: 16864MB, range: 16MB, type WB
reg 6, base: 3584MB, range: 512MB, type UC
total RAM covered: 16368M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 512MB, type WB
reg 6, base: 16880MB, range: 16MB, type UC
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd850-0x000fd85f] mapped at [ffff8800000fd850]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
BRK [0x021ee000, 0x021eefff] PGTABLE
BRK [0x021ef000, 0x021effff] PGTABLE
BRK [0x021f0000, 0x021f0fff] PGTABLE
BRK [0x021f1000, 0x021f1fff] PGTABLE
BRK [0x021f2000, 0x021f2fff] PGTABLE
BRK [0x021f3000, 0x021f3fff] PGTABLE
RAMDISK: [mem 0x338cc000-0x35c5dfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DD945080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DD953838 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000DD945198 00E699 (v02 ALASKA A M I 00000031 INTL 20091112)
ACPI: FACS 0x00000000DDE95080 000040
ACPI: APIC 0x00000000DD953948 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DD9539E0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: LPIT 0x00000000DD953A28 00005C (v01 ALASKA A M I 00000000 AMI. 00000005)
ACPI: SSDT 0x00000000DD953A88 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20091112)
ACPI: SSDT 0x00000000DD953FC8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20091112)
ACPI: MCFG 0x00000000DD954AA0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000DD954AE0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000DD954B18 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 0x00000000DD954E88 0034E1 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
ACPI: BGRT 0x00000000DD9583C8 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041effffff]
NODE_DATA(0) allocated [mem 0x41eff8000-0x41effbfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000041effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x00000000c8039fff]
node 0: [mem 0x00000000c8041000-0x00000000c848bfff]
node 0: [mem 0x00000000c88e2000-0x00000000dd736fff]
node 0: [mem 0x00000000defff000-0x00000000deffffff]
node 0: [mem 0x0000000100000000-0x000000041effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000041effffff]
On node 0 totalpages: 4178551
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 14092 pages used for memmap
DMA32 zone: 901851 pages, LIFO batch:31
Normal zone: 51136 pages used for memmap
Normal zone: 3272704 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xc803a000-0xc8040fff]
PM: Registered nosave memory: [mem 0xc848c000-0xc88e1fff]
PM: Registered nosave memory: [mem 0xdd737000-0xdd93ffff]
PM: Registered nosave memory: [mem 0xdd940000-0xdd958fff]
PM: Registered nosave memory: [mem 0xdd959000-0xdde96fff]
PM: Registered nosave memory: [mem 0xdde97000-0xdeffefff]
PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88041ec00000 s97880 r8192 d29096 u262144
pcpu-alloc: s97880 r8192 d29096 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4113238
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16329776K/16714204K available (8334K kernel code, 1276K rwdata, 3912K rodata, 1412K init, 1292K bss, 384428K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:488 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3498.241 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6996.48 BogoMIPS (lpj=3498241)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 5 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 28K (ffffffff820a2000 - ffffffff820a9000)
ftrace: allocating 31730 entries in 124 pages
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-4771 CPU @ 3.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
microcode: CPU1 microcode updated early to revision 0x1e, date = 2015-08-13
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2
microcode: CPU2 microcode updated early to revision 0x1e, date = 2015-08-13
#3
microcode: CPU3 microcode updated early to revision 0x1e, date = 2015-08-13
#4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (55971.85 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xc803a000-0xc8040fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xdd959000-0xdde96fff] (5496832 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 19:20:59, date: 02/11/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88040C3F1400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88040C0EA000 0005AA (v01 PmRef ApIst 00003000 INTL 20091112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88040C3E9800 000119 (v01 PmRef ApCst 00003000 INTL 20091112)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7200000-0xf720ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf721a000-0xf721a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7218000-0xf72183ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7210000-0xf7213fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7217000-0xf72173ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7216000-0xf72167ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7215000-0xf72150ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [10de:11c0] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [10de:0e0b] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xf7100000-0xf7100fff 64bit]
pci 0000:03:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xf7100000-0xf71fffff]
pci 0000:00:1c.2: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 04-05] (subtractive decode)
pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:04:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: Enabled 5 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xc803a000-0xcbffffff]
e820: reserve RAM buffer [mem 0xc848c000-0xcbffffff]
e820: reserve RAM buffer [mem 0xdd737000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x1c00-0x1cfe] has been reserved
system 00:01: [io 0x1d00-0x1dfe] has been reserved
system 00:01: [io 0x1e00-0x1efe] has been reserved
system 00:01: [io 0x1f00-0x1ffe] has been reserved
system 00:01: [io 0x1800-0x18fe] could not be reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0290-0x029f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved
system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xf7100000-0xf71fffff]
pci 0000:00:1c.2: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:00:1c.3: PCI bridge to [bus 04-05]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xf7100000-0xf71fffff]
pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:04: resource 13 [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:05: resource 11 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:05: resource 12 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:05: resource 13 [mem 0xe0000000-0xfeafffff window]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 36424K (ffff8800338cc000 - ffff880035c5e000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd9737000-0xdd737000] (64MB) mapped at [ffff8800d9737000-ffff8800dd736fff]
RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
hw unit of domain pp0-core 2^-14 Joules
hw unit of domain package 2^-14 Joules
hw unit of domain dram 2^-14 Joules
hw unit of domain pp1-gpu 2^-14 Joules
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1455218459.508:1): initialized
Initialise system trusted keyring
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xf1000000, mapped to 0xffffc90001c00000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 20, io mem 0xf7218000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-4-lowlatency ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7217000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-4-lowlatency ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.4.0-4-lowlatency xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.4.0-4-lowlatency xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x1e
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x1e
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x1e
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x1e
microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x1e
microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x1e
microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x1e
microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x1e
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 113539f7f2d5ddd2210f0e9bb6f53d4946fb79e9'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 4:89:344
tty tty61: hash matches
rtc_cmos 00:02: setting system clock to 2016-02-11 19:20:59 UTC (1455218459)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 4-5: new SuperSpeed USB device number 2 using xhci_hcd
usb 4-5: LPM exit latency is zeroed, disabling LPM.
usb 4-5: New USB device found, idVendor=1058, idProduct=1130
usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-5: Product: My Book 1130
usb 4-5: Manufacturer: Western Digital
usb 4-5: SerialNumber: 574341575A30323435343434
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1412K (ffffffff81f41000 - ffffffff820a2000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1892K (ffff880001827000 - ffff880001a00000)
Freeing unused kernel memory: 184K (ffff880001dd2000 - ffff880001e00000)
random: systemd-udevd urandom read with 6 bits of entropy available
usb 3-14: new high-speed USB device number 2 using xhci_hcd
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
r8168: module verification failed: signature and/or required key missing - tainting kernel
r8168 Gigabit Ethernet driver 8.041.00-NAPI loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf7216000 port 0xf7216100 irq 27
ata2: SATA max UDMA/133 abar m2048@0xf7216000 port 0xf7216180 irq 27
ata3: SATA max UDMA/133 abar m2048@0xf7216000 port 0xf7216200 irq 27
ata4: SATA max UDMA/133 abar m2048@0xf7216000 port 0xf7216280 irq 27
ata5: DUMMY
ata6: DUMMY
r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
r8168 Copyright (C) 2015 Realtek NIC software team
This program comes with ABSOLUTELY NO WARRANTY; for details, please see .
This is free software, and you are welcome to redistribute it under certain conditions; see .
usb 1-1: New USB device found, idVendor=8087, idProduct=8008
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=8000
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 4-6: new SuperSpeed USB device number 3 using xhci_hcd
usb 4-6: LPM exit latency is zeroed, disabling LPM.
usb 4-6: New USB device found, idVendor=1058, idProduct=1130
usb 4-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-6: Product: My Book 1130
usb 4-6: Manufacturer: Western Digital
usb 4-6: SerialNumber: 574341575A30323635363032
usb-storage 4-5:1.0: USB Mass Storage device detected
scsi host6: usb-storage 4-5:1.0
usb-storage 4-6:1.0: USB Mass Storage device detected
scsi host7: usb-storage 4-6:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
usb 3-14: New USB device found, idVendor=1a40, idProduct=0201
usb 3-14: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-14: Product: USB 2.0 Hub [MTT]
hub 3-14:1.0: USB hub found
hub 3-14:1.0: 7 ports detected
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: supports DRM functions and may not be fully accessible
ata3.00: ATA-9: ST1000DM003-1CH162, CC49, max UDMA/133
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: configured for UDMA/133
ata2.00: ATA-9: Crucial_CT512MX100SSD1, MU02, max UDMA/133
ata2.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: ATAPI: HL-DT-ST BD-RE GGW-H20L, YL07, max UDMA/133
ata2.00: supports DRM functions and may not be fully accessible
ata4.00: configured for UDMA/133
ata2.00: configured for UDMA/133
ata1.00: ATA-8: KINGSTON SV300S37A120G, 603ABBF0, max UDMA/133
ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
scsi 1:0:0:0: Direct-Access ATA Crucial_CT512MX1 MU02 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: Enabling discard_zeroes_data
sd 1:0:0:0: [sdb] 1000215216 512-byte logical blocks: (512 GB/476 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: Direct-Access ATA ST1000DM003-1CH1 CC49 PQ: 0 ANSI: 5
ata2.00: Enabling discard_zeroes_data
sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: [sdc] 4096-byte physical blocks
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sda: sda1 sda2
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Attached SCSI disk
sdb: sdb1 sdb2 sdb3 sdb4
ata2.00: Enabling discard_zeroes_data
sd 1:0:0:0: [sdb] Attached SCSI disk
sdc: sdc1 sdc2 sdc3
sd 2:0:0:0: [sdc] Attached SCSI disk
usb 3-14.1: new high-speed USB device number 3 using xhci_hcd
scsi 3:0:0:0: CD-ROM HL-DT-ST BD-RE GGW-H20L YL07 PQ: 0 ANSI: 5
usb 3-14.1: New USB device found, idVendor=2040, idProduct=c000
usb 3-14.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-14.1: Product: WinTV MiniStick
usb 3-14.1: Manufacturer: Hauppauge Computer Works
usb 3-14.1: SerialNumber: 4033982786
tsc: Refined TSC clocksource calibration: 3497.972 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x326bd592a83, max_idle_ns: 440795311901 ns
usb 3-14.2: new full-speed USB device number 4 using xhci_hcd
sr 3:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg3 type 5
usb 3-14.2: New USB device found, idVendor=0a5c, idProduct=2121
usb 3-14.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-14.2: Product: Bluetooth Dongle V2.0+EDR
usb 3-14.2: Manufacturer: Broadcom Corp
usb 3-14.3: new high-speed USB device number 5 using xhci_hcd
usb 3-14.3: New USB device found, idVendor=1a40, idProduct=0101
usb 3-14.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-14.3: Product: USB 2.0 Hub [MTT]
hub 3-14.3:1.0: USB hub found
hub 3-14.3:1.0: 4 ports detected
usb 3-14.4: new full-speed USB device number 6 using xhci_hcd
usb 3-14.4: New USB device found, idVendor=046d, idProduct=c52b
usb 3-14.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-14.4: Product: USB Receiver
usb 3-14.4: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-14.4/input2
usb 3-14.6: new high-speed USB device number 7 using xhci_hcd
input: Logitech M325 as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14.4/3-14.4:1.2/0003:046D:C52B.0003/0003:046D:400A.0004/input/input5
logitech-hidpp-device 0003:046D:400A.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M325] on usb-0000:00:14.0-14.4:1
usb 3-14.6: New USB device found, idVendor=041e, idProduct=4088
usb 3-14.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-14.6: Product: VF0700 Live! Cam Chat HD
usb 3-14.6: Manufacturer: Creative Technology Ltd.
usb 3-14.6: SerialNumber: -1@001544
scsi 6:0:0:0: Direct-Access WD My Book 1130 1016 PQ: 0 ANSI: 6
scsi 7:0:0:0: Direct-Access WD My Book 1130 1016 PQ: 0 ANSI: 6
scsi 6:0:0:1: Enclosure WD SES Device 1016 PQ: 0 ANSI: 6
scsi 7:0:0:1: Enclosure WD SES Device 1016 PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg4 type 0
scsi 6:0:0:1: Attached scsi generic sg5 type 13
sd 6:0:0:0: [sdd] 732558336 4096-byte logical blocks: (2.93 TB/2.72 TiB)
sd 7:0:0:0: Attached scsi generic sg6 type 0
sd 6:0:0:0: [sdd] Write Protect is off
sd 6:0:0:0: [sdd] Mode Sense: 47 00 10 08
scsi 7:0:0:1: Attached scsi generic sg7 type 13
sd 6:0:0:0: [sdd] No Caching mode page found
sd 7:0:0:0: [sde] 732558336 4096-byte logical blocks: (2.93 TB/2.72 TiB)
sd 7:0:0:0: [sde] Write Protect is off
sd 7:0:0:0: [sde] Mode Sense: 47 00 10 08
sd 6:0:0:0: [sdd] Assuming drive cache: write through
sd 7:0:0:0: [sde] No Caching mode page found
sd 7:0:0:0: [sde] Assuming drive cache: write through
sd 7:0:0:0: [sde] 732558336 4096-byte logical blocks: (2.93 TB/2.72 TiB)
sd 6:0:0:0: [sdd] 732558336 4096-byte logical blocks: (2.93 TB/2.72 TiB)
sde: sde1
sd 7:0:0:0: [sde] 732558336 4096-byte logical blocks: (2.93 TB/2.72 TiB)
sd 7:0:0:0: [sde] Attached SCSI disk
sdd: sdd1
random: nonblocking pool is initialized
sd 6:0:0:0: [sdd] 732558336 4096-byte logical blocks: (2.93 TB/2.72 TiB)
sd 6:0:0:0: [sdd] Attached SCSI disk
usb 3-14.3.1: new full-speed USB device number 8 using xhci_hcd
usb 3-14.3.1: New USB device found, idVendor=046d, idProduct=c534
usb 3-14.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-14.3.1: Product: USB Receiver
usb 3-14.3.1: Manufacturer: Logitech
ses 6:0:0:1: Attached Enclosure device
ses 7:0:0:1: Attached Enclosure device
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14.3/3-14.3.1/3-14.3.1:1.0/0003:046D:C534.0005/input/input6
hid-generic 0003:046D:C534.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-14.3.1/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14.3/3-14.3.1/3-14.3.1:1.1/0003:046D:C534.0006/input/input7
usb 3-14.3.3: new high-speed USB device number 9 using xhci_hcd
hid-generic 0003:046D:C534.0006: input,hiddev0,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-14.3.1/input1
usb 3-14.3.3: New USB device found, idVendor=2304, idProduct=0223
usb 3-14.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-14.3.3: Product: Pinnacle High Speed USB Device
usb 3-14.3.3: Manufacturer: Pinnacle Systems, Inc.
raid6: sse2x1 gen() 9734 MB/s
clocksource: Switched to clocksource tsc
raid6: sse2x1 xor() 9347 MB/s
raid6: sse2x2 gen() 15250 MB/s
raid6: sse2x2 xor() 10208 MB/s
raid6: sse2x4 gen() 17558 MB/s
raid6: sse2x4 xor() 12283 MB/s
raid6: avx2x1 gen() 23386 MB/s
raid6: avx2x2 gen() 27402 MB/s
raid6: avx2x4 gen() 31574 MB/s
raid6: using algorithm avx2x4 gen() 31574 MB/s
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 35716.000 MB/sec
Btrfs loaded
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
systemd[1]: Failed to insert module 'kdbus': Function not implemented
systemd[1]: systemd 228 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Created slice system-getty.slice.
systemd[1]: Mounting Debug File System...
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Reached target Remote File Systems.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Journal Service...
systemd[1]: Listening on udev Control Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Journal Service.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro
systemd-journald[375]: Received request to flush runtime journal from PID 1
wmi: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
[drm] Initialized drm 1.1.0 20060810
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input8
asus_wmi: Number of fans: 1
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 352.63 Sat Nov 7 21:25:42 PST 2015
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
Adding 16777212k swap on /dev/sdb2. Priority:-1 extents:1 across:16777212k SSFS
nvidia_uvm: Loaded the UVM driver, major device number 246
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
media: Linux media interface: v0.10
Linux video capture interface: v2.00
smsusb:smsusb_probe: board id=8, interface number 0
uvcvideo: Found UVC 1.00 device VF0700 Live! Cam Chat HD (041e:4088)
input: VF0700 Live! Cam Chat HD as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14.6/3-14.6:1.0/input/input22
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
Registered IR keymap rc-hauppauge
input: SMS IR (Hauppauge WinTV MiniStick) as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14.1/rc/rc0/input21
rc0: SMS IR (Hauppauge WinTV MiniStick) as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14.1/rc/rc0
IR NEC protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
smsusb:smsusb_probe: Device initialized with return code 0
lirc_dev: IR Remote Control driver registered, major 244
IR XMP protocol handler initialized
IR Sharp protocol handler initialized
IR SANYO protocol handler initialized
input: MCE IR Keyboard/Mouse (smsmdtv) as /devices/virtual/input/input23
IR MCE Keyboard/mouse protocol handler initialized
IR RC6 protocol handler initialized
IR RC5(x/sz) protocol handler initialized
rc rc0: lirc_dev: driver ir-lirc-codec (smsmdtv) registered at minor = 0
IR LIRC bridge handler initialized
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
DVB: registering new adapter (Hauppauge WinTV MiniStick)
usb 3-14.1: DVB: registering adapter 0 frontend 0 (Siano Mobile Digital MDTV Receiver)...
smsdvb:smsdvb_hotplug: DVB interface registered.
usbcore: registered new interface driver smsusb
usb 3-14.6: Warning! Unlikely big volume range (=5632), cval->res is probably wrong.
usb 3-14.6: [2] FU [Mic Capture Volume] ch = 1, val = -5632/0/1
usbcore: registered new interface driver snd-usb-audio
usbcore: registered new interface driver btusb
audit: type=1400 audit(1455214868.945:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=885 comm="apparmor_parser"
audit: type=1400 audit(1455214868.945:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=885 comm="apparmor_parser"
audit: type=1400 audit(1455214868.981:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=885 comm="apparmor_parser"
audit: type=1400 audit(1455214868.981:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=885 comm="apparmor_parser"
audit: type=1400 audit(1455214868.981:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=885 comm="apparmor_parser"
audit: type=1400 audit(1455214868.981:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=885 comm="apparmor_parser"
audit: type=1400 audit(1455214869.114:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=885 comm="apparmor_parser"
audit: type=1400 audit(1455214869.114:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=885 comm="apparmor_parser"
audit: type=1400 audit(1455214869.114:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=885 comm="apparmor_parser"
audit: type=1400 audit(1455214869.114:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=885 comm="apparmor_parser"
cgroup: new mount options do not match the existing superblock, will be ignored
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
vboxdrv: Found 8 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3497963666 Hz
vboxdrv: Successfully loaded version 5.0.14 (interface 0x00240000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
eth0: 0xffffc90001b9a000, 74:d0:2b:9e:33:4d, IRQ 26
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8168: eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 40
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
audit_printk_skb: 54 callbacks suppressed
audit: type=1400 audit(1455214882.111:30): apparmor="DENIED" operation="connect" profile="/usr/sbin/clamd" name="/run/clamav/clamd.ctl" pid=1032 comm="clamd" requested_mask="r" denied_mask="r" fsuid=122 ouid=122