dmesg - 1a
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.0-49-generic (buildd@lgw01-08) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #55~14.04.1-Ubuntu SMP Fri Jan 22 11:24:31 UTC 2016 (Ubuntu 3.19.0-49.55~14.04.1-generic 3.19.8-ckt12)
Command line: BOOT_IMAGE=/vmlinuz-3.19.0-49-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x00000000000917ff] usable
BIOS-e820: [mem 0x0000000000091800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000009e013fff] usable
BIOS-e820: [mem 0x000000009e014000-0x000000009e01afff] ACPI NVS
BIOS-e820: [mem 0x000000009e01b000-0x000000009e47afff] usable
BIOS-e820: [mem 0x000000009e47b000-0x000000009e8f2fff] reserved
BIOS-e820: [mem 0x000000009e8f3000-0x00000000bdb5bfff] usable
BIOS-e820: [mem 0x00000000bdb5c000-0x00000000bdd6bfff] reserved
BIOS-e820: [mem 0x00000000bdd6c000-0x00000000bdd8afff] ACPI data
BIOS-e820: [mem 0x00000000bdd8b000-0x00000000be2b3fff] ACPI NVS
BIOS-e820: [mem 0x00000000be2b4000-0x00000000beffefff] reserved
BIOS-e820: [mem 0x00000000befff000-0x00000000beffffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000043effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: ASUS All Series/Z97-A, BIOS 2501 04/27/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x43f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DBFFF write-protect
DC000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7C00000000 write-back
1 base 0400000000 mask 7FE0000000 write-back
2 base 0420000000 mask 7FF0000000 write-back
3 base 0430000000 mask 7FF8000000 write-back
4 base 0438000000 mask 7FFC000000 write-back
5 base 043C000000 mask 7FFE000000 write-back
6 base 043E000000 mask 7FFF000000 write-back
7 base 00C0000000 mask 7FC0000000 uncachable
8 disabled
9 disabled
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 16GB, range: 512MB, type WB
reg 2, base: 16896MB, range: 256MB, type WB
reg 3, base: 17152MB, range: 128MB, type WB
reg 4, base: 17280MB, range: 64MB, type WB
reg 5, base: 17344MB, range: 32MB, type WB
reg 6, base: 17376MB, range: 16MB, type WB
reg 7, base: 3GB, range: 1GB, type UC
total RAM covered: 16368M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 4GB, range: 4GB, type WB
reg 3, base: 8GB, range: 8GB, type WB
reg 4, base: 16GB, range: 1GB, type WB
reg 5, base: 17392MB, range: 16MB, type UC
e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd8c0-0x000fd8cf] mapped at [ffff8800000fd8c0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff88000008b000] 8b000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
init_memory_mapping: [mem 0x43ee00000-0x43effffff]
[mem 0x43ee00000-0x43effffff] page 2M
BRK [0x01fd7000, 0x01fd7fff] PGTABLE
init_memory_mapping: [mem 0x420000000-0x43edfffff]
[mem 0x420000000-0x43edfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x41fffffff]
[mem 0x400000000-0x41fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x9e013fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0x9dffffff] page 2M
[mem 0x9e000000-0x9e013fff] page 4k
init_memory_mapping: [mem 0x9e01b000-0x9e47afff]
[mem 0x9e01b000-0x9e1fffff] page 4k
[mem 0x9e200000-0x9e3fffff] page 2M
[mem 0x9e400000-0x9e47afff] page 4k
BRK [0x01fd8000, 0x01fd8fff] PGTABLE
init_memory_mapping: [mem 0x9e8f3000-0xbdb5bfff]
[mem 0x9e8f3000-0x9e9fffff] page 4k
[mem 0x9ea00000-0xbd9fffff] page 2M
[mem 0xbda00000-0xbdb5bfff] page 4k
BRK [0x01fd9000, 0x01fd9fff] PGTABLE
init_memory_mapping: [mem 0xbefff000-0xbeffffff]
[mem 0xbefff000-0xbeffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 1G
RAMDISK: [mem 0x34b20000-0x36587fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BDD72090 000094 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000BDD81E10 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000BDD721B8 00FC58 (v02 ALASKA A M I 00000011 INTL 20120711)
ACPI: FACS 0x00000000BE2B3F80 000040
ACPI: APIC 0x00000000BDD81F20 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000BDD81FB8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000BDD82000 000C7D (v01 Ther_R Ther_Rvp 00001000 INTL 20120711)
ACPI: SSDT 0x00000000BDD82C80 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000BDD831C0 000B74 (v01 CpuRef CpuSsdt 00003000 INTL 20051117)
ACPI: MCFG 0x00000000BDD83D38 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000BDD83D78 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000BDD83DB0 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
ACPI: SSDT 0x00000000BDD84120 005977 (v01 SaSsdt SaSsdt 00003000 INTL 20120711)
ACPI: UEFI 0x00000000BDD8A1C0 00005C (v01 INTEL RstSataV 00000000 ?? 00000000)
ACPI: UEFI 0x00000000BDD89AF0 000042 (v01 ALASKA A M I 01072009 00000000)
ACPI: UEFI 0x00000000BDD89B38 000044 (v01 INTEL RstSataR 00000000 ?? 00000000)
ACPI: UEFI 0x00000000BDD89B80 00063A (v01 INTEL RstSataE 00000000 ?? 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000043effffff]
NODE_DATA(0) allocated [mem 0x43eff7000-0x43effbfff]
[ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042e600000-ffff88043e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x43effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x00090fff]
node 0: [mem 0x00100000-0x9e013fff]
node 0: [mem 0x9e01b000-0x9e47afff]
node 0: [mem 0x9e8f3000-0xbdb5bfff]
node 0: [mem 0xbefff000-0xbeffffff]
node 0: [mem 0x100000000-0x43effffff]
Initmem setup node 0 [mem 0x00001000-0x43effffff]
On node 0 totalpages: 4179566
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3984 pages, LIFO batch:0
DMA32 zone: 12060 pages used for memmap
DMA32 zone: 771806 pages, LIFO batch:31
Normal zone: 53184 pages used for memmap
Normal zone: 3403776 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x9e014000-0x9e01afff]
PM: Registered nosave memory: [mem 0x9e47b000-0x9e8f2fff]
PM: Registered nosave memory: [mem 0xbdb5c000-0xbdd6bfff]
PM: Registered nosave memory: [mem 0xbdd6c000-0xbdd8afff]
PM: Registered nosave memory: [mem 0xbdd8b000-0xbe2b3fff]
PM: Registered nosave memory: [mem 0xbe2b4000-0xbeffefff]
PM: Registered nosave memory: [mem 0xbf000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xbf000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88043ec00000 s86144 r8192 d32640 u262144
pcpu-alloc: s86144 r8192 d32640 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4114237
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.19.0-49-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16345432K/16718264K available (7923K kernel code, 1174K rwdata, 3760K rodata, 1408K init, 1292K bss, 372832K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:488 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 4000.075 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 8000.15 BogoMIPS (lpj=16000300)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 32K (ffffffff81e87000 - ffffffff81e8f000)
ftrace: allocating 30034 entries in 118 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
smpboot: CPU0: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz (fam: 06, model: 3c, stepping: 03)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (64001.20 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x9e014000-0x9e01afff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xbdd8b000-0xbe2b3fff] (5410816 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 3:06:48, date: 02/10/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 4 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88042C362800 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdff20000-0xdff2ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdff3a000-0xdff3a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xdff00000-0xdff1ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xdff38000-0xdff38fff]
pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xdff37000-0xdff373ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xdff30000-0xdff33fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xdff36000-0xdff363ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400
pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xdff35000-0xdff357ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xdff34000-0xdff340ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [1002:68f9] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xdfe20000-0xdfe3ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x30: [mem 0xdfe00000-0xdfe1ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [1002:aa68] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xdfe40000-0xdfe43fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xdfe00000-0xdfefffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [1b21:1080] type 01 class 0x060401
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 03-04] (subtractive decode)
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode)
pci 0000:04:01.0: [1186:4b01] type 00 class 0x020000
pci 0000:04:01.0: reg 0x10: [mem 0xdfd20000-0xdfd23fff]
pci 0000:04:01.0: reg 0x14: [io 0xd000-0xd0ff]
pci 0000:04:01.0: reg 0x30: [mem 0xdfd00000-0xdfd1ffff pref]
pci 0000:04:01.0: supports D1 D2
pci 0000:04:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode)
pci 0000:03:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:03:00.0: bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:03:00.0: bridge window [io 0xd000-0xdfff] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0xdfd00000-0xdfdfffff] (subtractive decode)
pci 0000:03:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:03:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 11 12 14 15)
ACPI: Enabled 6 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00091800-0x0009ffff]
e820: reserve RAM buffer [mem 0x9e014000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9e47b000-0x9fffffff]
e820: reserve RAM buffer [mem 0xbdb5c000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff]
e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0290-0x029f] has been reserved
system 00:04: [io 0x02a0-0x02af] has been reserved
system 00:04: [io 0x0a00-0x0aff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xdffe0000-0xdffeffff] has been reserved
system 00:07: [mem 0xdfff0000-0xdfffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xdfe00000-0xdfefffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:03:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:03:00.0: bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:00:1c.3: PCI bridge to [bus 03-04]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xdfd00000-0xdfdfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 9 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xdfe00000-0xdfefffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xdfd00000-0xdfdfffff]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000dc000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:03: resource 9 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:03: resource 10 [mem 0xc0000000-0xfeafffff]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xdfd00000-0xdfdfffff]
pci_bus 0000:04: resource 4 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 5 [mem 0xdfd00000-0xdfdfffff]
pci_bus 0000:04: resource 6 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:04: resource 10 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:04: resource 11 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:04: resource 12 [mem 0xc0000000-0xfeafffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 27040K (ffff880034b20000 - ffff880036588000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb9b5c000-0xbdb5c000] (64MB) mapped at [ffff8800b9b5c000-ffff8800bdb5bfff]
RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x19
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1455073608.480:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1400x1050x32, linelength=5632, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90011c00000, using 5824k, total 5824k
Console: switching to colour frame buffer device 175x65
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.19.0-49-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.19.0-49-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xdff37000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.19.0-49-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xdff36000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 3.19.0-49-generic ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
Consider also installing thermald for improved thermal control.
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: a932dc237895a44d3959bf91a3566a20ee211f37'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 4:106:108
rtc_cmos 00:02: setting system clock to 2016-02-10 03:06:49 UTC (1455073609)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 256K (ffff8800017c0000 - ffff880001800000)
Freeing unused kernel memory: 336K (ffff880001bac000 - ffff880001c00000)
systemd-udevd[148]: starting version 204
wmi: Mapper loaded
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
skge: 1.14 addr 0xdfd20000 irq 16 chip Yukon-Lite rev 9
skge 0000:04:01.0 eth0: addr 00:19:5b:fd:a5:bc
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xdff35000 port 0xdff35100 irq 26
ata2: SATA max UDMA/133 abar m2048@0xdff35000 port 0xdff35180 irq 26
ata3: SATA max UDMA/133 abar m2048@0xdff35000 port 0xdff35200 irq 26
ata4: SATA max UDMA/133 abar m2048@0xdff35000 port 0xdff35280 irq 26
ata5: SATA max UDMA/133 abar m2048@0xdff35000 port 0xdff35300 irq 26
ata6: SATA max UDMA/133 abar m2048@0xdff35000 port 0xdff35380 irq 26
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0 eth1: registered PHC clock
e1000e 0000:00:19.0 eth1: (PCI Express:2.5GT/s:Width x1) 78:24:af:88:8d:3e
e1000e 0000:00:19.0 eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth1: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
usb 1-1: new full-speed USB device number 2 using xhci_hcd
usb 3-1: new high-speed USB device number 2 using ehci-pci
usb 4-1: new high-speed USB device number 2 using ehci-pci
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
ata3.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: ATA-9: WDC WD30EFRX-68AX9N0, 80.00A80, max UDMA/133
ata4.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
ata1.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff88042e0e65f0), AE_NOT_FOUND (20141107/psparse-536)
ata3.00: configured for UDMA/133
ata4.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff88042e0e6578), AE_NOT_FOUND (20141107/psparse-536)
ata5.00: supports DRM functions and may not be fully accessible
ata5.00: failed to get NCQ Send/Recv Log Emask 0x1
ata5.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0BB6Q, max UDMA/133
ata5.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff88042e0e6578), AE_NOT_FOUND (20141107/psparse-536)
ata5.00: supports DRM functions and may not be fully accessible
ata5.00: failed to get NCQ Send/Recv Log Emask 0x1
ata5.00: configured for UDMA/133
ata2.00: ATAPI: ATAPI DVD A DH16A1L, KH15, max UDMA/33
usb 1-1: New USB device found, idVendor=046d, idProduct=c52b
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: USB Receiver
usb 1-1: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ata2.00: configured for UDMA/33
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1/input2
scsi 1:0:0:0: CD-ROM ATAPI DVD A DH16A1L KH15 PQ: 0 ANSI: 5
ata6.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
ata6.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32)
usb 3-1: New USB device found, idVendor=8087, idProduct=8009
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 6 ports detected
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff88042e0e65f0), AE_NOT_FOUND (20141107/psparse-536)
sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
scsi 2:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 2:0:0:0: [sdb] 4096-byte physical blocks
scsi 3:0:0:0: Direct-Access ATA WDC WD30EFRX-68A 0A80 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 3:0:0:0: [sdc] 4096-byte physical blocks
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 4:0:0:0: Direct-Access ATA Samsung SSD 840 BB6Q PQ: 0 ANSI: 5
sd 4:0:0:0: [sdd] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 4:0:0:0: [sdd] Write Protect is off
sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1 sdd2 < sdd5 >
sd 4:0:0:0: [sdd] Attached SCSI disk
usb 4-1: New USB device found, idVendor=8087, idProduct=8001
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 8 ports detected
GPT:Primary header thinks Alt. header is not at the end of the disk.
GPT:5860528127 != 5860533167
GPT:Alternate GPT header not at the end of the disk.
GPT:5860528127 != 5860533167
GPT: Use GNU Parted to correct GPT errors.
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
sd 5:0:0:0: [sde] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
sd 5:0:0:0: [sde] Write Protect is off
sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: Attached scsi generic sg5 type 0
sde:
sd 5:0:0:0: [sde] Attached SCSI disk
GPT:Primary header thinks Alt. header is not at the end of the disk.
GPT:5860528127 != 5860533167
GPT:Alternate GPT header not at the end of the disk.
GPT:5860528127 != 5860533167
GPT: Use GNU Parted to correct GPT errors.
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI disk
sdc: sdc1
sd 3:0:0:0: [sdc] Attached SCSI disk
random: lvm urandom read with 59 bits of entropy available
random: nonblocking pool is initialized
tsc: Refined TSC clocksource calibration: 3999.996 MHz
device-mapper: table: 252:5: mirror: Device lookup failure
device-mapper: ioctl: error adding target to table
Switched to clocksource tsc
raid6: sse2x1 14188 MB/s
raid6: sse2x2 17934 MB/s
raid6: sse2x4 20656 MB/s
raid6: avx2x1 27473 MB/s
raid6: avx2x2 32016 MB/s
raid6: avx2x4 37209 MB/s
raid6: using algorithm avx2x4 (37209 MB/s)
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 43236.000 MB/sec
Btrfs loaded
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
Adding 16715772k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-1 extents:1 across:16715772k SSFS
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
EXT4-fs (sdd1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sdd1): mounted filesystem without journal. Opts: (null)
systemd-udevd[717]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
fglrx: module verification failed: signature and/or required key missing - tainting kernel
input: Logitech K400 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:400E.0004/input/input5
logitech-hidpp-device 0003:046D:400E.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K400] on usb-0000:00:14.0-1:1
input: Logitech M325 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:400A.0005/input/input6
logitech-hidpp-device 0003:046D:400A.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech M325] on usb-0000:00:14.0-1:2
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
audit: type=1400 audit(1455073612.729:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=858 comm="apparmor_parser"
audit: type=1400 audit(1455073612.729:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=858 comm="apparmor_parser"
audit: type=1400 audit(1455073612.729:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=858 comm="apparmor_parser"
audit: type=1400 audit(1455073612.729:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=858 comm="apparmor_parser"
audit: type=1400 audit(1455073612.729:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=858 comm="apparmor_parser"
audit: type=1400 audit(1455073612.729:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=858 comm="apparmor_parser"
audit: type=1400 audit(1455073612.729:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=877 comm="apparmor_parser"
audit: type=1400 audit(1455073612.729:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=877 comm="apparmor_parser"
audit: type=1400 audit(1455073612.729:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=877 comm="apparmor_parser"
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
sound hdaudioC0D0: autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: dig-out=0x11/0x1e
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Front Mic=0x19
sound hdaudioC0D0: Rear Mic=0x18
sound hdaudioC0D0: Line=0x1a
[fglrx] Maximum main memory to use for locked dma buffers: 15616 MBytes.
[fglrx] vendor: 1002 device: 68f9 revision: 0 count: 1
[fglrx] ioport: bar 4, base 0xe000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 15.20.3 [Sep 8 2015] with 1 minors
device-mapper: multipath: version 1.7.0 loaded
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input15
asus_wmi: Disabling ACPI video driver
init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
device-mapper: table: 252:5: mirror: Device lookup failure
device-mapper: ioctl: error adding target to table
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
device eth1 entered promiscuous mode
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: cups main process (1409) killed by HUP signal
init: cups main process ended, respawning
IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
br0: port 1(eth1) entered listening state
br0: port 1(eth1) entered listening state
br0: port 1(eth1) entered learning state
br0: topology change detected, propagating
br0: port 1(eth1) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
init: failsafe main process (1312) killed by TERM signal
init: network-manager main process (1871) terminated with status 127
init: network-manager main process ended, respawning
init: Failed to spawn x11vnc main process: unable to execute: No such file or directory
init: isc-dhcp-server pre-start process (2060) terminated with status 127
audit_printk_skb: 18 callbacks suppressed
audit: type=1400 audit(1455073624.213:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=2168 comm="apparmor_parser"
Ebtables v2.0 registered
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
[fglrx] Firegl kernel thread PID: 2324
[fglrx] Firegl kernel thread PID: 2325
[fglrx] Firegl kernel thread PID: 2326
[fglrx] IRQ 31 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:f7b4000, size:4000
[fglrx] Reserved FB block: Unshared offset:f7b8000, size:548000
[fglrx] Reserved FB block: Unshared offset:7fff3000, size:d000
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (2377) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
cgroup: systemd-logind (1383) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
cgroup: "memory" requires setting use_hierarchy to 1 on the root
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entered listening state
br0: port 2(vnet0) entered listening state
kvm: zapping shadow pages for mmio generation wraparound
device vnet1 entered promiscuous mode
br0: port 3(vnet1) entered listening state
br0: port 3(vnet1) entered listening state
kvm: zapping shadow pages for mmio generation wraparound
br0: port 2(vnet0) entered learning state
br0: port 3(vnet1) entered learning state
br0: topology change detected, propagating
br0: port 2(vnet0) entered forwarding state
br0: topology change detected, propagating
br0: port 3(vnet1) entered forwarding state
kvm [2762]: vcpu0 disabled perfctr wrmsr: 0xc2 data 0xffff
kvm [2796]: vcpu0 disabled perfctr wrmsr: 0xc2 data 0xffff
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net ffffffff81cda080)
init: plymouth-stop pre-start process (3163) terminated with status 1
audit: type=1400 audit(1455073642.035:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3346 comm="apparmor_parser"
audit: type=1400 audit(1455073642.035:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3346 comm="apparmor_parser"
audit: type=1400 audit(1455073642.035:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3346 comm="apparmor_parser"
init: upstart-udev-bridge main process (693) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-socket-bridge main process (1198) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
init: upstart-file-bridge main process (1425) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-udev-bridge main process (6049) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-socket-bridge main process (6053) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
init: upstart-file-bridge main process (6054) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-udev-bridge main process (6847) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-file-bridge main process (6851) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-socket-bridge main process (6852) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
init: upstart-udev-bridge main process (6875) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-socket-bridge main process (6878) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
init: upstart-file-bridge main process (6880) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-udev-bridge main process (6913) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-socket-bridge main process (6925) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
init: upstart-file-bridge main process (6924) terminated with status 1
init: upstart-file-bridge main process ended, respawning