dmesg - DL320_G5

Return To DL320_G5 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.2.0-16-generic (buildd@lcy01-07) (gcc version 5.2.1 20151003 (Ubuntu 5.2.1-21ubuntu2) ) #19-Ubuntu SMP Thu Oct 8 15:35:06 UTC 2015 (Ubuntu 4.2.0-16.19-generic 4.2.3)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001ffeffff] usable
BIOS-e820: [mem 0x000000001fff0000-0x000000001fffefff] ACPI data
BIOS-e820: [mem 0x000000001ffff000-0x000000001fffffff] ACPI NVS
NX (Execute Disable) protection: active
SMBIOS 2.3 present.
DMI: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090006  05/23/2012
Hypervisor detected: Microsoft HyperV
HyperV: features 0xc7f, hints 0x2f
HyperV: LAPIC Timer Frequency: 0xc3500
clocksource: hyperv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
tsc: Marking TSC unstable due to running on Hyper-V
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x1fff0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-DFFFF uncachable
  E0000-FFFFF write-back
MTRR variable ranges enabled:
  0 base 0000000000 mask 3F00000000 write-back
  1 disabled
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01ff0000, 0x01ff0fff] PGTABLE
BRK [0x01ff1000, 0x01ff1fff] PGTABLE
BRK [0x01ff2000, 0x01ff2fff] PGTABLE
init_memory_mapping: [mem 0x1fc00000-0x1fdfffff]
 [mem 0x1fc00000-0x1fdfffff] page 2M
init_memory_mapping: [mem 0x00100000-0x1fbfffff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x1fbfffff] page 2M
init_memory_mapping: [mem 0x1fe00000-0x1ffeffff]
 [mem 0x1fe00000-0x1ffeffff] page 4k
BRK [0x01ff3000, 0x01ff3fff] PGTABLE
RAMDISK: [mem 0x1d7af000-0x1f42cfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F56F0 000014 (v00 ACPIAM)
ACPI: RSDT 0x000000001FFF0000 000040 (v01 VRTUAL MICROSFT 05001223 MSFT 00000097)
ACPI: FACP 0x000000001FFF0200 000081 (v02 VRTUAL MICROSFT 05001223 MSFT 00000097)
ACPI: DSDT 0x000000001FFF1724 002E78 (v01 MSFTVM MSFTVM02 00000002 INTL 02002026)
ACPI: FACS 0x000000001FFFF000 000040
ACPI: WAET 0x000000001FFF1480 000028 (v01 VRTUAL MICROSFT 05001223 MSFT 00000097)
ACPI: SLIC 0x000000001FFF14C0 000176 (v01 VRTUAL MICROSFT 05001223 MSFT 00000097)
ACPI: OEM0 0x000000001FFF16C0 000064 (v01 VRTUAL MICROSFT 05001223 MSFT 00000097)
ACPI: SRAT 0x000000001FFF0600 000068 (v02 VRTUAL MICROSFT 00000001 MSFT 00000001)
ACPI: APIC 0x000000001FFF0300 00024C (v01 VRTUAL MICROSFT 05001223 MSFT 00000097)
ACPI: OEMB 0x000000001FFFF040 000064 (v01 VRTUAL MICROSFT 05001223 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x1fffffff]
NODE_DATA(0) allocated [mem 0x1ffeb000-0x1ffeffff]
 [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001ce00000-ffff88001d5fffff] on node 0
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x000000001ffeffff]
  Normal   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009efff]
  node   0: [mem 0x0000000000100000-0x000000001ffeffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffeffff]
On node 0 totalpages: 130958
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3998 pages, LIFO batch:0
  DMA32 zone: 1984 pages used for memmap
  DMA32 zone: 126960 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 64 CPUs, 63 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
e820: [mem 0x20000000-0xffffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:64 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88001be00000 s96728 r8192 d30248 u262144
pcpu-alloc: s96728 r8192 d30248 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 
pcpu-alloc: [0] 32 33 34 35 36 37 38 39 [0] 40 41 42 43 44 45 46 47 
pcpu-alloc: [0] 48 49 50 51 52 53 54 55 [0] 56 57 58 59 60 61 62 63 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 128889
Policy zone: DMA32
log_buf_len individual max cpu contribution: 4096 bytes
log_buf_len total cpu_extra contributions: 258048 bytes
log_buf_len min size: 262144 bytes
log_buf_len: 524288 bytes
early log buf free: 254088(96%)
PID hash table entries: 2048 (order: 2, 16384 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 460820K/523832K available (8146K kernel code, 1237K rwdata, 3800K rodata, 1460K init, 1292K bss, 63012K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=64, Nodes=1
Hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 64.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=64.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=64
NR_IRQS:16640 nr_irqs:936 16
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-63.
Console: colour dummy device 80x25
console [tty0] enabled
tsc: Fast TSC calibration failed
tsc: Unable to calibrate against PIT
tsc: using PMTIMER reference calibration
tsc: Detected 2000.050 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.10 BogoMIPS (lpj=8000200)
pid_max: default: 65536 minimum: 512
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
mce: CPU supports 1 MCE banks
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
ftrace: allocating 30905 entries in 121 pages
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU           E5335  @ 2.00GHz (fam: 06, model: 0f, stepping: 0b)
Performance Events: unsupported p6 CPU model 15 no PMU driver, software events only.
x86: Booted up 1 node, 1 CPUs
smpboot: Total of 1 processors activated (4000.10 BogoMIPS)
NMI watchdog: disabled (cpu0): hardware events not enabled
NMI watchdog: Shutting down hard lockup detector on all cpus
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x1ffff000-0x1fffffff] (4096 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 15:03:37, date: 02/10/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20150619/hwxface-580)
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [mem 0xfe0000000-0xfffefffff window]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfffbffff window]
pci 0000:00:00.0: [8086:7192] type 00 class 0x060000
pci 0000:00:07.0: [8086:7110] type 00 class 0x060100
pci 0000:00:07.1: [8086:7111] type 00 class 0x010180
pci 0000:00:07.1: reg 0x20: [io  0xffa0-0xffaf]
pci 0000:00:07.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
pci 0000:00:07.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
pci 0000:00:07.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
pci 0000:00:07.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
pci 0000:00:07.3: [8086:7113] type 00 class 0x068000
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
               * this clock source is slow. Consider trying other clock sources
pci 0000:00:07.3: quirk: [io  0x0400-0x043f] claimed by PIIX4 ACPI
pci 0000:00:08.0: [1414:5353] type 00 class 0x030000
pci 0000:00:08.0: reg 0x10: [mem 0xf8000000-0xfbffffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: Enabled 1 GPEs in block 00 to 0F
vgaarb: setting as boot device: PCI:0000:00:08.0
vgaarb: device added: PCI:0000:00:08.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:08.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x1fff0000-0x1fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
clocksource: Switched to clocksource hyperv_clocksource
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: [dma 2]
pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
system 00:06: [io  0x01e0-0x01ef] has been reserved
system 00:06: [io  0x0160-0x016f] has been reserved
system 00:06: [io  0x0278-0x027f] has been reserved
system 00:06: [io  0x0378-0x037f] has been reserved
system 00:06: [io  0x0678-0x067f] has been reserved
system 00:06: [io  0x0778-0x077f] has been reserved
system 00:06: [io  0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io  0x0400-0x043f] has been reserved
system 00:07: [io  0x0370-0x0371] has been reserved
system 00:07: [io  0x0440-0x044f] has been reserved
system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:08: [mem 0x000c0000-0x000dffff] could not be reserved
system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:08: [mem 0x00100000-0xf7ffffff] could not be reserved
system 00:08: [mem 0xfffc0000-0xffffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci_bus 0000:00: resource 4 [mem 0xfe0000000-0xfffefffff window]
pci_bus 0000:00: resource 5 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 6 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 8 [mem 0xf8000000-0xfffbffff window]
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:08.0: Video device with shadowed ROM
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 29176K (ffff88001d7af000 - ffff88001f42d000)
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cd45d9537b, max_idle_ns: 440795285105 ns
microcode: CPU0 sig=0x6fb, pf=0x1, revision=0xffffffff
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 16384 (order: 8, 1048576 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1455116618.128:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 800x600x32, linelength=3200, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xf8000000, mapped to 0xffffc90000200000, using 1920k, total 1920k
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 15
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:07.1: version 2.13
ata_piix 0000:00:07.1: Hyper-V Virtual Machine detected, ATA device ignore set
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, 114 bytes nvram
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
PCCT header not found.
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 6a1c9c21f04ab86fd1d7ced6ca113540fc8e35b6'
registered taskstats version 1
zswap: loading zswap
zswap: using zbud pool
zswap: using lzo compressor
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
  Magic number: 4:828:82
rtc_cmos 00:00: setting system clock to 2016-02-10 15:03:38 UTC (1455116618)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
ata2.00: ATAPI: Virtual CD, , max MWDMA2
ata1.00: host indicates ignore ATA devices, ignored
ata2.00: configured for MWDMA2
scsi 1:0:0:0: CD-ROM            Msft     Virtual CD/ROM   1.0  PQ: 0 ANSI: 5
sr 1:0:0:0: [sr0] scsi3-mmc drive: 0x/0x tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg0 type 5
Freeing unused kernel memory: 1460K (ffffffff81d37000 - ffffffff81ea4000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 36K (ffff8800017f7000 - ffff880001800000)
Freeing unused kernel memory: 296K (ffff880001bb6000 - ffff880001c00000)
random: udevadm urandom read with 3 bits of entropy available
hv_vmbus: Hyper-V Host Build:9600-6.3-17-0.17031; Vmbus version:3.0
hv_vmbus: CPU offlining is not supported by hypervisor
Floppy drive(s): fd0 is 1.44M
FDC 0 is an 82078.
psmouse serio1: trackpoint: failed to get extended button data
hv_utils: Registering HyperV Utility Driver
hv_vmbus: registering driver hv_util
hv_vmbus: registering driver hv_storvsc
hidraw: raw HID events driver (C) Jiri Kosina
hv_vmbus: registering driver hid_hyperv
scsi host2: storvsc_host_t
scsi 2:0:0:0: Direct-Access     Msft     Virtual Disk     1.0  PQ: 0 ANSI: 4
hv_vmbus: registering driver hv_netvsc
sd 2:0:0:0: [sda] 33554432 512-byte logical blocks: (17.1 GB/16.0 GiB)
sd 2:0:0:0: [sda] 4096-byte physical blocks
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 0f 00 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < sda5 >
input: Microsoft Vmbus HID-compliant Mouse as /devices/0006:045E:0621.0001/input/input4
sd 2:0:0:0: [sda] Attached SCSI disk
hid 0006:045E:0621.0001: input:  HID v0.01 Mouse [Microsoft Vmbus HID-compliant Mouse] on 
hv_netvsc: hv_netvsc channel opened successfully
hv_netvsc vmbus_14: Send section size: 6144, Section count:2560
hv_netvsc vmbus_14: Device MAC 00:15:5d:01:0d:00 link state up
scsi host3: storvsc_host_t
scsi 3:0:0:0: scsi scan: INQUIRY result too short (5), using 36
scsi 3:0:0:1: scsi scan: INQUIRY result too short (5), using 36
scsi 3:0:1:0: scsi scan: INQUIRY result too short (5), using 36
scsi 3:0:1:1: scsi scan: INQUIRY result too short (5), using 36
scsi 3:1:0:0: scsi scan: INQUIRY result too short (5), using 36
scsi 3:1:0:1: scsi scan: INQUIRY result too short (5), using 36
scsi 3:1:1:0: scsi scan: INQUIRY result too short (5), using 36
scsi 3:1:1:1: scsi scan: INQUIRY result too short (5), using 36
scsi 3:2:0:0: scsi scan: INQUIRY result too short (5), using 36
scsi 3:2:0:1: scsi scan: INQUIRY result too short (5), using 36
scsi 3:2:1:0: scsi scan: INQUIRY result too short (5), using 36
scsi 3:2:1:1: scsi scan: INQUIRY result too short (5), using 36
scsi 3:3:0:0: scsi scan: INQUIRY result too short (5), using 36
scsi 3:3:0:1: scsi scan: INQUIRY result too short (5), using 36
scsi 3:3:1:0: scsi scan: INQUIRY result too short (5), using 36
scsi 3:3:1:1: scsi scan: INQUIRY result too short (5), using 36
scsi 3:4:0:0: scsi scan: INQUIRY result too short (5), using 36
scsi 3:4:0:1: scsi scan: INQUIRY result too short (5), using 36
scsi 3:4:1:0: scsi scan: INQUIRY result too short (5), using 36
scsi 3:4:1:1: scsi scan: INQUIRY result too short (5), using 36
scsi 3:5:0:0: scsi scan: INQUIRY result too short (5), using 36
scsi 3:5:0:1: scsi scan: INQUIRY result too short (5), using 36
scsi 3:5:1:0: scsi scan: INQUIRY result too short (5), using 36
scsi 3:5:1:1: scsi scan: INQUIRY result too short (5), using 36
scsi 3:6:0:0: scsi scan: INQUIRY result too short (5), using 36
scsi 3:6:0:1: scsi scan: INQUIRY result too short (5), using 36
scsi 3:6:1:0: scsi scan: INQUIRY result too short (5), using 36
scsi 3:6:1:1: scsi scan: INQUIRY result too short (5), using 36
scsi 3:7:0:0: scsi scan: INQUIRY result too short (5), using 36
scsi 3:7:0:1: scsi scan: INQUIRY result too short (5), using 36
scsi 3:7:1:0: scsi scan: INQUIRY result too short (5), using 36
scsi 3:7:1:1: scsi scan: INQUIRY result too short (5), using 36
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Failed to insert module 'kdbus': Function not implemented
systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected virtualization microsoft.
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Initializing machine ID from D-Bus machine ID.
systemd[1]: Installed transient /etc/machine-id file.
systemd[1]: /etc/mtab is not a symlink or not pointing to /proc/self/mounts. This is not supported anymore. Please make sure to replace this file by a symlink to avoid incorrect or misleading mount(8) output.
systemd[1]: display-manager.service: Cannot add dependency job, ignoring: Unit display-manager.service failed to load: No such file or directory.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice Root Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting Debug File System...
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Load Kernel Modules.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Started Journal Service.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
random: nonblocking pool is initialized
systemd-journald[289]: Received request to flush runtime journal from PID 1
psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x01, buttons: 0/0
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input3
audit: type=1400 audit(1455145425.569:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=382 comm="apparmor_parser"
audit: type=1400 audit(1455145425.573:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=382 comm="apparmor_parser"
audit: type=1400 audit(1455145425.577:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=382 comm="apparmor_parser"
audit: type=1400 audit(1455145425.577:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=382 comm="apparmor_parser"
ifquery[440]: segfault at 1 ip 0000000000403187 sp 00007ffc6a802d50 error 4 in ifup[400000+d000]
hv_vmbus: registering driver hyperv_keyboard
hv_vmbus: registering driver hyperv_fb
input: AT Translated Set 2 keyboard as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:07/VMBUS:01/vmbus_4/serio2/input/input5
hyperv_fb: Screen resolution: 1152x864, Color depth: 32
checking generic (f8000000 1e0000) vs hw (f8000000 4000000)
fb: switching to hyperv_fb from VESA VGA
Console: switching to colour dummy device 80x25
Console: switching to colour frame buffer device 144x54
piix4_smbus 0000:00:07.3: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
audit: type=1400 audit(1455145426.033:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld" pid=439 comm="apparmor_parser"
audit: type=1400 audit(1455145426.553:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=446 comm="apparmor_parser"
Adding 522236k swap on /dev/sda5.  Priority:-1 extents:1 across:522236k FS

Return To DL320_G5 System Information