dmesg - jgf
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.0-30-generic (buildd@lgw01-13) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #33-Ubuntu SMP Mon Sep 21 20:58:04 UTC 2015 (Ubuntu 3.19.0-30.33-generic 3.19.8-ckt6)
Command line: BOOT_IMAGE=lenovotest/casper/vmlinuz root=/dev/nfs boot=casper netboot=nfs nfsroot=192.168.11.2:/tftpboot/lenovotest initrd=lenovotest/casper/initrd.gz quiet splash --
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000685c0fff] usable
BIOS-e820: [mem 0x00000000685c1000-0x00000000685c1fff] ACPI NVS
BIOS-e820: [mem 0x00000000685c2000-0x00000000685ebfff] reserved
BIOS-e820: [mem 0x00000000685ec000-0x000000007958efff] usable
BIOS-e820: [mem 0x000000007958f000-0x0000000079f7efff] reserved
BIOS-e820: [mem 0x0000000079f7f000-0x000000007bf7efff] ACPI NVS
BIOS-e820: [mem 0x000000007bf7f000-0x000000007bffefff] ACPI data
BIOS-e820: [mem 0x000000007bfff000-0x000000007bffffff] usable
BIOS-e820: [mem 0x000000007c000000-0x000000007f7fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffa10000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000017f7fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: LENOVO 59AC/VIUU4, BIOS D5CN17WW(L001) 06/05/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x17f800 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-combining
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7E00000000 write-back
1 base 007C000000 mask 7FFC000000 uncachable
2 base 0080000000 mask 7F80000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 1984MB, range: 64MB, type UC
reg 2, base: 2GB, range: 2GB, type UC
total RAM covered: 6080M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 1984MB, range: 64MB, type UC
reg 2, base: 4GB, range: 4GB, type WB
e820: update [mem 0x7c000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x7c000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
BRK [0x01fe7000, 0x01fe7fff] PGTABLE
init_memory_mapping: [mem 0x17f600000-0x17f7fffff]
[mem 0x17f600000-0x17f7fffff] page 2M
BRK [0x01fe8000, 0x01fe8fff] PGTABLE
init_memory_mapping: [mem 0x160000000-0x17f5fffff]
[mem 0x160000000-0x17f5fffff] page 2M
init_memory_mapping: [mem 0x140000000-0x15fffffff]
[mem 0x140000000-0x15fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x685c0fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x683fffff] page 2M
[mem 0x68400000-0x685c0fff] page 4k
init_memory_mapping: [mem 0x685ec000-0x7958efff]
[mem 0x685ec000-0x685fffff] page 4k
[mem 0x68600000-0x793fffff] page 2M
[mem 0x79400000-0x7958efff] page 4k
BRK [0x01fe9000, 0x01fe9fff] PGTABLE
init_memory_mapping: [mem 0x7bfff000-0x7bffffff]
[mem 0x7bfff000-0x7bffffff] page 4k
BRK [0x01fea000, 0x01feafff] PGTABLE
init_memory_mapping: [mem 0x100000000-0x13fffffff]
[mem 0x100000000-0x13fffffff] page 1G
RAMDISK: [mem 0x777e5000-0x7958efff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
ACPI: XSDT 0x000000007BFCA188 0000D4 (v01 LENOVO CB-01 00000001 01000013)
ACPI: FACP 0x000000007BFEF000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: DSDT 0x000000007BFD4000 0169B1 (v02 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: FACS 0x000000007BF7C000 000040
ACPI: SSDT 0x000000007BFCE000 000E58 (v02 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x000000007BFCF000 000B2F (v02 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x000000007BFD0000 002BAE (v02 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x000000007BFD3000 0002D4 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: MCFG 0x000000007BFEB000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: APIC 0x000000007BFEC000 0000BC (v03 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: LPIT 0x000000007BFED000 000094 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: HPET 0x000000007BFEE000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: DBGP 0x000000007BFF0000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: BOOT 0x000000007BFF1000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: ASPT 0x000000007BFF2000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: ASF! 0x000000007BFF3000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x000000007BFF4000 0006EA (v02 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: DBG2 0x000000007BFF5000 000054 (v00 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: DBGP 0x000000007BFF6000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x000000007BFF7000 003051 (v02 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: UEFI 0x000000007BFFC000 000042 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: UEFI 0x000000007BFFD000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x000000007BFCC000 001AFC (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: DMAR 0x000000007BFCB000 0000A8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: FPDT 0x000000007BFC9000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000017f7fffff]
NODE_DATA(0) allocated [mem 0x17f7f9000-0x17f7fdfff]
[ffffea0000000000-ffffea0005ffffff] PMD -> [ffff88017ae00000-ffff88017edfffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x17f7fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0x685c0fff]
node 0: [mem 0x685ec000-0x7958efff]
node 0: [mem 0x7bfff000-0x7bffffff]
node 0: [mem 0x100000000-0x17f7fffff]
Initmem setup node 0 [mem 0x00001000-0x17f7fffff]
On node 0 totalpages: 1019138
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 7702 pages used for memmap
DMA32 zone: 492901 pages, LIFO batch:31
Normal zone: 8160 pages used for memmap
Normal zone: 522240 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0x7d800000-0x7f7fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x685c1000-0x685c1fff]
PM: Registered nosave memory: [mem 0x685c2000-0x685ebfff]
PM: Registered nosave memory: [mem 0x7958f000-0x79f7efff]
PM: Registered nosave memory: [mem 0x79f7f000-0x7bf7efff]
PM: Registered nosave memory: [mem 0x7bf7f000-0x7bffefff]
PM: Registered nosave memory: [mem 0x7c000000-0x7f7fffff]
PM: Registered nosave memory: [mem 0x7f800000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfcffffff]
PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
PM: Registered nosave memory: [mem 0xfe800000-0xfeafffff]
PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffa0ffff]
PM: Registered nosave memory: [mem 0xffa10000-0xffffffff]
e820: [mem 0x7f800000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88017f400000 s87104 r8192 d31680 u262144
pcpu-alloc: s87104 r8192 d31680 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1003191
Policy zone: Normal
Kernel command line: BOOT_IMAGE=lenovotest/casper/vmlinuz root=/dev/nfs boot=casper netboot=nfs nfsroot=192.168.11.2:/tftpboot/lenovotest initrd=lenovotest/casper/initrd.gz quiet splash --
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x3, cntxt size 0x240 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3896932K/4076552K available (8004K kernel code, 1234K rwdata, 3764K rodata, 1408K init, 1300K bss, 179620K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:2048 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: Unable to calibrate against PIT
tsc: using HPET reference calibration
tsc: Detected 2111.291 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4222.58 BogoMIPS (lpj=8445164)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI Error: [_UPC] Namespace lookup failure, AE_ALREADY_EXISTS (20141107/dswload-369)
ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20141107/psobject-224)
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 8 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 32K (ffffffff81e96000 - ffffffff81e9e000)
ftrace: allocating 30120 entries in 118 pages
dmar: Host address width 39
dmar: DRHD base: 0x000000fed90000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
dmar: DRHD base: 0x000000fed91000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
dmar: RMRR base: 0x00000079eaa000 end: 0x00000079ec9fff
dmar: RMRR base: 0x0000007d000000 end: 0x0000007f7fffff
IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
HPET id 0 under DRHD base 0xfed91000
Queued invalidation will be enabled to support x2apic and Intr-remapping.
Your BIOS is broken and requested that x2apic be disabled.
This will slightly decrease performance.
Use 'intremap=no_x2apic_optout' to override BIOS request.
Enabled IRQ remapping in xapic mode
x2apic not enabled, IRQ remapping is in xapic mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Pentium(R) CPU 4405U @ 2.10GHz (fam: 06, model: 4e, stepping: 03)
TSC deadline timer enabled
Performance Events: no PEBS fmt3+, generic architected perfmon, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (16890.32 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x685c1000-0x685c1fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x79f7f000-0x7bf7efff] (33554432 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 9:55:53, date: 02/02/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 17 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880179A0A400 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20121220)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880179953000 0005BB (v02 PmRef Cpu0Ist 00003000 INTL 20121220)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880179953800 0005AA (v02 PmRef ApIst 00003000 INTL 20121220)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880179A74200 000119 (v02 PmRef ApCst 00003000 INTL 20121220)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PC05] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x7f800000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff]
pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
pci 0000:00:02.0: [8086:1906] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xa1300000-0xa130ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xa132a000-0xa132afff 64bit]
pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xa132b000-0xa132bfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xa1328000-0xa1329fff]
pci 0000:00:17.0: reg 0x14: [mem 0xa132e000-0xa132e0ff]
pci 0000:00:17.0: reg 0x18: [io 0x5080-0x5087]
pci 0000:00:17.0: reg 0x1c: [io 0x5088-0x508b]
pci 0000:00:17.0: reg 0x20: [io 0x5060-0x507f]
pci 0000:00:17.0: reg 0x24: [mem 0xa132c000-0xa132c7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:9d14] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9d43] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xa1324000-0xa1327fff]
pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xa1320000-0xa1323fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xa1310000-0xa131ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.3: System wakeup disabled by ACPI
pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xa132d000-0xa132d0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0x5040-0x505f]
pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [io 0x4000-0x40ff]
pci 0000:01:00.0: reg 0x18: [mem 0xa1204000-0xa1204fff 64bit]
pci 0000:01:00.0: reg 0x20: [mem 0xa1200000-0xa1203fff 64bit]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.0: bridge window [mem 0xa1200000-0xa12fffff]
pci 0000:02:00.0: [8086:3166] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xa1100000-0xa1101fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: PCI bridge to [bus 02]
pci 0000:00:1c.5: bridge window [mem 0xa1100000-0xa11fffff]
pci 0000:03:00.0: [1002:6660] type 00 class 0x038000
pci 0000:03:00.0: reg 0x10: [mem 0x80000000-0x8fffffff 64bit pref]
pci 0000:03:00.0: reg 0x18: [mem 0xa1000000-0xa103ffff 64bit]
pci 0000:03:00.0: reg 0x20: [io 0x3000-0x30ff]
pci 0000:03:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: PCI bridge to [bus 03]
pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1d.0: bridge window [mem 0xa1000000-0xa10fffff]
pci 0000:00:1d.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 5 GPEs in block 00 to 7F
ACPI : EC: GPE = 0x4f, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0x685c1000-0x6bffffff]
e820: reserve RAM buffer [mem 0x7958f000-0x7bffffff]
e820: reserve RAM buffer [mem 0x17f800000-0x17fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x1800-0x18fe] could not be reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:05: Plug and Play ACPI device, IDs SYN2b5a PNP0f13 SYN0002 SYN2b00 (active)
system 00:06: [mem 0xfe029000-0xfe029fff] has been reserved
system 00:06: [mem 0xfe028000-0xfe028fff] has been reserved
system 00:06: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:06: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:06: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] could not be reserved
system 00:07: [mem 0xff000000-0xffffffff] could not be reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0x7f800000-0x7f81ffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
pci 0000:03:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.0: bridge window [mem 0xa1200000-0xa12fffff]
pci 0000:00:1c.5: PCI bridge to [bus 02]
pci 0000:00:1c.5: bridge window [mem 0xa1100000-0xa11fffff]
pci 0000:03:00.0: BAR 6: assigned [mem 0xa1040000-0xa105ffff pref]
pci 0000:00:1d.0: PCI bridge to [bus 03]
pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1d.0: bridge window [mem 0xa1000000-0xa10fffff]
pci 0000:00:1d.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x7f800000-0xdfffffff]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff]
pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:01: resource 1 [mem 0xa1200000-0xa12fffff]
pci_bus 0000:02: resource 1 [mem 0xa1100000-0xa11fffff]
pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xa1000000-0xa10fffff]
pci_bus 0000:03: resource 2 [mem 0x80000000-0x8fffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 30376K (ffff8800777e5000 - ffff88007958f000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x737e5000-0x777e5000] (64MB) mapped at [ffff8800737e5000-ffff8800777e4fff]
Simple Boot Flag at 0x44 set to 0x1
microcode: CPU0 sig=0x406e3, pf=0x80, revision=0x23
microcode: CPU1 sig=0x406e3, pf=0x80, revision=0x23
microcode: CPU2 sig=0x406e3, pf=0x80, revision=0x23
microcode: CPU3 sig=0x406e3, pf=0x80, revision=0x23
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1454406953.852:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1d.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1d.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 78
ACPI: AC Adapter [ADP0] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.19.0-30-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 12 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.19.0-30-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
ACPI PCC probe failed.
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 091db276173d833742e96ac870591adb9bccda53'
registered taskstats version 1
Key type trusted registered
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 4:966:928
rtc_cmos 00:02: setting system clock to 2016-02-02 09:55:54 UTC (1454406954)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
ACPI: Battery Slot [BAT0] (battery present)
Freeing unused kernel memory: 1408K (ffffffff81d36000 - ffffffff81e96000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 176K (ffff8800017d4000 - ffff880001800000)
Freeing unused kernel memory: 332K (ffff880001bad000 - ffff880001c00000)
random: systemd-udevd urandom read with 12 bits of entropy available
wmi: Mapper loaded
ahci 0000:00:17.0: version 3.0
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[drm] Initialized drm 1.1.0 20060810
r8169 0000:01:00.0 eth0: RTL8168h/8111h at 0xffffc90000664000, 68:f7:28:e6:97:2c, XID 14100880 IRQ 127
r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m2048@0xa132c000 port 0xa132c100 irq 126
ata2: SATA max UDMA/133 abar m2048@0xa132c000 port 0xa132c180 irq 126
[drm] radeon kernel modesetting enabled.
VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
radeon 0000:03:00.0: enabling device (0400 -> 0403)
[drm] initializing kernel modesetting (HAINAN 0x1002:0x6660 0x17AA:0x3809).
[drm] register mmio base: 0xA1000000
[drm] register mmio size: 262144
ATOM BIOS: Lenovo/Compal
[drm] GPU not posted. posting now...
radeon 0000:03:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:03:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 1964628 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading hainan Microcode
[drm] Internal thermal controller without fan control
[drm] probing gen 2 caps for device 8086:9d18 = 9724042/6
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] probing gen 2 caps for device 8086:9d18 = 9724042/6
[drm] PCIE gen 2 link speeds already enabled
[drm] PCIE GART of 1024M enabled (table at 0x0000000000040000).
radeon 0000:03:00.0: WB enabled
radeon 0000:03:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880176369c00
radeon 0000:03:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff880176369c04
radeon 0000:03:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff880176369c08
radeon 0000:03:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880176369c0c
radeon 0000:03:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff880176369c10
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:03:00.0: radeon: MSI limited to 32-bit
radeon 0000:03:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
usb 1-4: new high-speed USB device number 2 using xhci_hcd
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] Radeon Display Connectors
radeon 0000:03:00.0: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
[drm] fb mappable at 0x80242000
[drm] vram apper at 0x80000000
[drm] size 3145728
[drm] fb depth is 24
[drm] pitch is 4096
Console: switching to colour frame buffer device 128x48
radeon 0000:03:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:03:00.0: registered panic notifier
[drm] Initialized radeon 2.40.0 20080528 for 0000:03:00.0 on minor 0
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: WDC WD10JPCX-24UE4T0, 01.01A01, max UDMA/133
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD10JPCX-24U 1A01 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: HL-DT-ST DVDRAM GUE0N, T.02, max UDMA/33
ata2.00: configured for UDMA/33
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GUE0N T.02 PQ: 0 ANSI: 5
sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
usb 1-4: New USB device found, idVendor=5986, idProduct=0673
usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-4: Product: Lenovo EasyCamera
usb 1-4: Manufacturer: Bison Corp.
usb 1-4: SerialNumber: 200901010001
usb 1-5: new high-speed USB device number 3 using xhci_hcd
usb 1-5: New USB device found, idVendor=0bda, idProduct=0129
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: USB2.0-CRW
usb 1-5: Manufacturer: Generic
usb 1-5: SerialNumber: 20100201396000000
usbcore: registered new interface driver rtsx_usb
tsc: Refined TSC clocksource calibration: 2111.999 MHz
usb 1-7: new full-speed USB device number 4 using xhci_hcd
psmouse serio1: synaptics: queried max coordinates: x [..5670], y [..4794]
psmouse serio1: synaptics: queried min coordinates: x [1314..], y [1098..]
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00223/0x840300/0x2a800, board id: 2848, fw id: 1886398
usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
Switched to clocksource tsc
sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
sd 0:0:0:0: [sda] Attached SCSI disk
random: nonblocking pool is initialized
r8169 0000:01:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:01:00.0 eth0: link down
r8169 0000:01:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
squashfs: version 4.0 (2009/01/31) Phillip Lougher
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: [/lib/systemd/system/casper.service:10] Failed to parse input specifier, ignoring: force-tty
systemd[1]: Unit rofs.mount is bound to inactive unit dev-loop0.device. Stopping, too.
systemd[1]: Startup finished in 13.216s (kernel) + 221ms (userspace) = 13.438s.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Starting Remote File Systems (Pre).
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Starting Journal Audit Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting system-getty.slice.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Mounted VMware vmblock fuse mount.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Started Braille Device Support.
systemd[1]: Starting Braille Device Support...
systemd[1]: Starting Nameserver information manager...
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Read required files in advance...
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Remount Root and Kernel File Systems.
systemd[1]: Started Nameserver information manager.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Various fixups to make systemd work better on Debian...
systemd[1]: Started Rebuild Hardware Database.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Started Load/Save Random Seed.
systemd[1]: Started Various fixups to make systemd work better on Debian.
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Starting udev Wait for Complete Device Initialization...
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Started Journal Service.
systemd-journald[471]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
hidraw: raw HID events driver (C) Jiri Kosina
input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input6
[drm] probing gen 2 caps for device 8086:9d18 = 9724042/6
[drm] PCIE gen 2 link speeds already enabled
[drm] PCIE GART of 1024M enabled (table at 0x0000000000040000).
radeon 0000:03:00.0: WB enabled
radeon 0000:03:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880176369c00
radeon 0000:03:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff880176369c04
radeon 0000:03:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff880176369c08
radeon 0000:03:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880176369c0c
radeon 0000:03:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff880176369c10
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
Bluetooth: hci0: read Intel version: 370810011003110e00
media: Linux media interface: v0.10
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
Linux video capture interface: v2.00
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
kvm: disabled by bios
uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0673)
input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
[drm:r600_ring_test [radeon]] *ERROR* radeon: ring 0 test failed (scratch(0x850C)=0xCAFEDEAD)
[drm:si_resume [radeon]] *ERROR* si startup failed on resume
[drm] Memory usable by graphics device = 4096M
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vga_switcheroo: enabled
ATPX version 1, functions 0x00000033
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
fbcon: inteldrmfb (fb1) is primary device
fbcon: Remapping primary device, fb1, to tty 1-63
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[drm] Initialized i915_bpo 1.6.0 20150522 for 0000:00:02.0 on minor 1
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915_bpo])
sound hdaudioC0D0: CX20751/2: BIOS auto-probing.
sound hdaudioC0D0: autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Internal Mic=0x1a
sound hdaudioC0D0: Mic=0x19
sound hdaudioC0D0: Enable sync_write for stable communication
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
i915_bpo 0000:00:02.0: fb1: inteldrmfb frame buffer device
ifquery[687]: segfault at 1 ip 00000000004031c8 sp 00007fffc51a8d10 error 4 in ifup[400000+d000]
[drm] RC6 on
cgroup: new mount options do not match the existing superblock, will be ignored
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[drm:fw_domains_get [i915_bpo]] *ERROR* render: timed out waiting for forcewake ack request.