dmesg - acercompress1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-76-generic (buildd@lgw01-21) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #120-Ubuntu SMP Mon Jan 18 15:59:10 UTC 2016 (Ubuntu 3.13.0-76.120-generic 3.13.11-ckt30)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] ACPI NVS
BIOS-e820: [mem 0x0000000000070000-0x0000000000085fff] usable
BIOS-e820: [mem 0x0000000000086000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
BIOS-e820: [mem 0x0000000020100000-0x0000000077cfdfff] usable
BIOS-e820: [mem 0x0000000077cfe000-0x000000007860dfff] reserved
BIOS-e820: [mem 0x000000007860e000-0x000000007870dfff] ACPI NVS
BIOS-e820: [mem 0x000000007870e000-0x000000007874dfff] ACPI data
BIOS-e820: [mem 0x000000007874e000-0x0000000079365fff] usable
BIOS-e820: [mem 0x0000000079366000-0x0000000079c65fff] ACPI NVS
BIOS-e820: [mem 0x0000000079c66000-0x0000000079ffffff] usable
BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
e820: update [mem 0x74bfc018-0x74c0c057] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000006efff] usable
reserve setup_data: [mem 0x000000000006f000-0x000000000006ffff] ACPI NVS
reserve setup_data: [mem 0x0000000000070000-0x0000000000085fff] usable
reserve setup_data: [mem 0x0000000000086000-0x000000000009ffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable
reserve setup_data: [mem 0x0000000020000000-0x00000000200fffff] reserved
reserve setup_data: [mem 0x0000000020100000-0x0000000074bfc017] usable
reserve setup_data: [mem 0x0000000074bfc018-0x0000000074c0c057] usable
reserve setup_data: [mem 0x0000000074c0c058-0x0000000077cfdfff] usable
reserve setup_data: [mem 0x0000000077cfe000-0x000000007860dfff] reserved
reserve setup_data: [mem 0x000000007860e000-0x000000007870dfff] ACPI NVS
reserve setup_data: [mem 0x000000007870e000-0x000000007874dfff] ACPI data
reserve setup_data: [mem 0x000000007874e000-0x0000000079365fff] usable
reserve setup_data: [mem 0x0000000079366000-0x0000000079c65fff] ACPI NVS
reserve setup_data: [mem 0x0000000079c66000-0x0000000079ffffff] usable
reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
reserve setup_data: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
reserve setup_data: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000017fffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by INSYDE Corp.
efi: ACPI 2.0=0x7874d014 SMBIOS=0x7860d000
efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000002000) (0MB)
efi: mem02: type=7, attr=0xf, range=[0x0000000000002000-0x000000000006f000) (0MB)
efi: mem03: type=10, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
efi: mem04: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000086000) (0MB)
efi: mem05: type=0, attr=0xf, range=[0x0000000000086000-0x0000000000088000) (0MB)
efi: mem06: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB)
efi: mem07: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
efi: mem08: type=2, attr=0xf, range=[0x0000000001000000-0x0000000002404000) (20MB)
efi: mem09: type=7, attr=0xf, range=[0x0000000002404000-0x0000000020000000) (475MB)
efi: mem10: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020100000) (1MB)
efi: mem11: type=7, attr=0xf, range=[0x0000000020100000-0x000000003ed87000) (492MB)
efi: mem12: type=2, attr=0xf, range=[0x000000003ed87000-0x0000000040000000) (18MB)
efi: mem13: type=7, attr=0xf, range=[0x0000000040000000-0x0000000052872000) (296MB)
efi: mem14: type=2, attr=0xf, range=[0x0000000052872000-0x0000000070000000) (471MB)
efi: mem15: type=4, attr=0xf, range=[0x0000000070000000-0x0000000070020000) (0MB)
efi: mem16: type=7, attr=0xf, range=[0x0000000070020000-0x0000000074bfc000) (75MB)
efi: mem17: type=2, attr=0xf, range=[0x0000000074bfc000-0x0000000074cfe000) (1MB)
efi: mem18: type=7, attr=0xf, range=[0x0000000074cfe000-0x0000000074cff000) (0MB)
efi: mem19: type=2, attr=0xf, range=[0x0000000074cff000-0x0000000074d03000) (0MB)
efi: mem20: type=7, attr=0xf, range=[0x0000000074d03000-0x0000000074d04000) (0MB)
efi: mem21: type=2, attr=0xf, range=[0x0000000074d04000-0x0000000074d05000) (0MB)
efi: mem22: type=7, attr=0xf, range=[0x0000000074d05000-0x0000000074d06000) (0MB)
efi: mem23: type=2, attr=0xf, range=[0x0000000074d06000-0x0000000074d0c000) (0MB)
efi: mem24: type=7, attr=0xf, range=[0x0000000074d0c000-0x0000000074d0e000) (0MB)
efi: mem25: type=2, attr=0xf, range=[0x0000000074d0e000-0x0000000074d10000) (0MB)
efi: mem26: type=7, attr=0xf, range=[0x0000000074d10000-0x0000000074d11000) (0MB)
efi: mem27: type=2, attr=0xf, range=[0x0000000074d11000-0x0000000074dfe000) (0MB)
efi: mem28: type=7, attr=0xf, range=[0x0000000074dfe000-0x0000000074ed8000) (0MB)
efi: mem29: type=1, attr=0xf, range=[0x0000000074ed8000-0x0000000074ffe000) (1MB)
efi: mem30: type=7, attr=0xf, range=[0x0000000074ffe000-0x0000000075eda000) (14MB)
efi: mem31: type=4, attr=0xf, range=[0x0000000075eda000-0x00000000774fe000) (22MB)
efi: mem32: type=7, attr=0xf, range=[0x00000000774fe000-0x000000007798b000) (4MB)
efi: mem33: type=3, attr=0xf, range=[0x000000007798b000-0x0000000077cfe000) (3MB)
efi: mem34: type=5, attr=0x800000000000000f, range=[0x0000000077cfe000-0x0000000077d8e000) (0MB)
efi: mem35: type=6, attr=0x800000000000000f, range=[0x0000000077d8e000-0x000000007800e000) (2MB)
efi: mem36: type=0, attr=0xf, range=[0x000000007800e000-0x000000007860e000) (6MB)
efi: mem37: type=10, attr=0xf, range=[0x000000007860e000-0x000000007870e000) (1MB)
efi: mem38: type=9, attr=0xf, range=[0x000000007870e000-0x000000007874e000) (0MB)
efi: mem39: type=4, attr=0xf, range=[0x000000007874e000-0x0000000079366000) (12MB)
efi: mem40: type=10, attr=0xf, range=[0x0000000079366000-0x0000000079c66000) (9MB)
efi: mem41: type=4, attr=0xf, range=[0x0000000079c66000-0x000000007a000000) (3MB)
efi: mem42: type=7, attr=0xf, range=[0x0000000100000000-0x0000000180000000) (2048MB)
efi: mem43: type=11, attr=0x8000000000000001, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB)
efi: mem44: type=11, attr=0x8000000000000000, range=[0x00000000fed01000-0x00000000fed02000) (0MB)
efi: mem45: type=11, attr=0x8000000000000000, range=[0x00000000ffb80000-0x0000000100000000) (4MB)
SMBIOS 2.7 present.
DMI: Acer Aspire E5-511/Aspire E5-511, BIOS V1.03 05/16/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFC00000 mask FFFC00000 write-protect
1 base 0FFB80000 mask FFFF80000 write-protect
2 base 000000000 mask F80000000 write-back
3 base 07C000000 mask FFC000000 uncachable
4 base 07B000000 mask FFF000000 uncachable
5 base 07AE00000 mask FFFE00000 uncachable
6 base 100000000 mask F80000000 write-back
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0x7a000 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000080000] 80000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
[mem 0x17fe00000-0x17fffffff] page 2M
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
[mem 0x17c000000-0x17fdfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x17bffffff]
[mem 0x100000000-0x17bffffff] page 2M
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
init_memory_mapping: [mem 0x00100000-0x1fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x1fffffff] page 2M
init_memory_mapping: [mem 0x20100000-0x77cfdfff]
[mem 0x20100000-0x201fffff] page 4k
[mem 0x20200000-0x77bfffff] page 2M
[mem 0x77c00000-0x77cfdfff] page 4k
BRK [0x01fe7000, 0x01fe7fff] PGTABLE
init_memory_mapping: [mem 0x7874e000-0x79365fff]
[mem 0x7874e000-0x787fffff] page 4k
[mem 0x78800000-0x791fffff] page 2M
[mem 0x79200000-0x79365fff] page 4k
init_memory_mapping: [mem 0x79c66000-0x79ffffff]
[mem 0x79c66000-0x79dfffff] page 4k
[mem 0x79e00000-0x79ffffff] page 2M
RAMDISK: [mem 0x3ed87000-0x3fffafff]
ACPI: RSDP 000000007874d014 000024 (v02 ACRSYS)
ACPI: XSDT 000000007874d120 00009C (v01 ACRSYS ACRPRDCT 00000003 01000013)
ACPI: FACP 0000000078746000 00010C (v05 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: DSDT 0000000078735000 00CE05 (v02 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: FACS 00000000786d6000 000040
ACPI: UEFI 000000007874c000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: MSDM 000000007874b000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: UEFI 000000007874a000 000042 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
ACPI: SSDT 0000000078747000 002F1D (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
ACPI: HPET 0000000078745000 000038 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: LPIT 0000000078744000 000104 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: APIC 0000000078743000 000084 (v03 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: MCFG 0000000078742000 00003C (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: SSDT 0000000078733000 000763 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: SSDT 0000000078732000 000290 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: SSDT 0000000078731000 00017A (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: SSDT 0000000078730000 0003E6 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
ACPI: FPDT 000000007872f000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: BGRT 0000000078734000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000017fffffff]
Initmem setup node 0 [mem 0x00000000-0x17fffffff]
NODE_DATA [mem 0x17fff6000-0x17fffafff]
[ffffea0000000000-ffffea0005ffffff] PMD -> [ffff88017b600000-ffff88017f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x17fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0006efff]
node 0: [mem 0x00070000-0x00085fff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20100000-0x77cfdfff]
node 0: [mem 0x7874e000-0x79365fff]
node 0: [mem 0x79c66000-0x79ffffff]
node 0: [mem 0x100000000-0x17fffffff]
On node 0 totalpages: 1018676
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3972 pages, LIFO batch:0
DMA32 zone: 7663 pages used for memmap
DMA32 zone: 490416 pages, LIFO batch:31
Normal zone: 8192 pages used for memmap
Normal zone: 524288 pages, LIFO batch:31
tboot: non-0 tboot_addr but it is not of type E820_RESERVED
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 103
PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
PM: Registered nosave memory: [mem 0x00086000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
PM: Registered nosave memory: [mem 0x74bfc000-0x74bfcfff]
PM: Registered nosave memory: [mem 0x74c0c000-0x74c0cfff]
PM: Registered nosave memory: [mem 0x77cfe000-0x7860dfff]
PM: Registered nosave memory: [mem 0x7860e000-0x7870dfff]
PM: Registered nosave memory: [mem 0x7870e000-0x7874dfff]
PM: Registered nosave memory: [mem 0x79366000-0x79c65fff]
PM: Registered nosave memory: [mem 0x7a000000-0x7affffff]
PM: Registered nosave memory: [mem 0x7b000000-0x7effffff]
PM: Registered nosave memory: [mem 0x7f000000-0xe00f7fff]
PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
PM: Registered nosave memory: [mem 0xfed02000-0xffb7ffff]
PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
e820: [mem 0x7f000000-0xe00f7fff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88017fc00000 s81536 r8192 d20864 u524288
pcpu-alloc: s81536 r8192 d20864 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1002736
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3864648K/4074704K available (7399K kernel code, 1146K rwdata, 3416K rodata, 1336K init, 1448K bss, 210056K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
NR_IRQS:16640 nr_irqs:1024 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2166.753 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4333.50 BogoMIPS (lpj=8667012)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
process: using mwait in idle threads
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 128, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28598 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Celeron(R) CPU N2840 @ 2.16GHz (fam: 06, model: 37, stepping: 08)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000ffffffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
CPU1: Thermal monitoring handled by SMI
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (8667.01 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x0006f000-0x0006ffff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x7860e000-0x7870dfff] (1048576 bytes)
PM: Registering ACPI NVS region [mem 0x79366000-0x79c65fff] (9437184 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 19:02:30, date: 02/01/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: SSDT 00000000785caa18 00045B (v01 PmRef Cpu0Ist 00003000 INTL 20130117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00045B (v01 PmRef Cpu0Ist 00003000 INTL 20130117)
ACPI: SSDT 00000000785c9918 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
ACPI: SSDT 00000000785cbe18 00015F (v01 PmRef ApIst 00003000 INTL 20130117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00015F (v01 PmRef ApIst 00003000 INTL 20130117)
ACPI: SSDT 00000000785d7e18 00008D (v01 PmRef ApCst 00003000 INTL 20130117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00008D (v01 PmRef ApCst 00003000 INTL 20130117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [USBC] (on)
ACPI: Power Resource [FN00] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x006f]
pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
pci_bus 0000:00: root bus resource [mem 0x80000000-0x908ffffe]
pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff]
pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
pci 0000:00:02.0: reg 0x20: [io 0x2050-0x2057]
pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
pci 0000:00:13.0: reg 0x10: [io 0x2048-0x204f]
pci 0000:00:13.0: reg 0x14: [io 0x205c-0x205f]
pci 0000:00:13.0: reg 0x18: [io 0x2040-0x2047]
pci 0000:00:13.0: reg 0x1c: [io 0x2058-0x205b]
pci 0000:00:13.0: reg 0x20: [io 0x2020-0x203f]
pci 0000:00:13.0: reg 0x24: [mem 0x9081f000-0x9081f7ff]
pci 0000:00:13.0: PME# supported from D3hot
pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0x90800000-0x9080ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
pci 0000:00:1a.0: reg 0x10: [mem 0x90700000-0x907fffff]
pci 0000:00:1a.0: reg 0x14: [mem 0x90600000-0x906fffff]
pci 0000:00:1a.0: PME# supported from D0 D3hot
pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0x90810000-0x90813fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0x90819000-0x9081901f]
pci 0000:00:1f.3: reg 0x20: [io 0x2000-0x201f]
pci 0000:01:00.0: [10ec:5287] type 00 class 0xff0000
pci 0000:01:00.0: reg 0x10: [mem 0x90505000-0x90505fff]
pci 0000:01:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.1: reg 0x10: [io 0x1000-0x10ff]
pci 0000:01:00.1: reg 0x18: [mem 0x90504000-0x90504fff 64bit]
pci 0000:01:00.1: reg 0x20: [mem 0x90500000-0x90503fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0x90500000-0x905fffff]
pci 0000:02:00.0: [14e4:4365] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0x90400000-0x90407fff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [mem 0x90400000-0x904fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
e820: reserve RAM buffer [mem 0x00086000-0x0008ffff]
e820: reserve RAM buffer [mem 0x74bfc018-0x77ffffff]
e820: reserve RAM buffer [mem 0x77cfe000-0x77ffffff]
e820: reserve RAM buffer [mem 0x79366000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.0 BAR 13 [io 0x1000-0x1fff]
system 00:03: [io 0x0680-0x069f] has been reserved
system 00:03: [io 0x0400-0x047f] has been reserved
system 00:03: [io 0x0500-0x05fe] has been reserved
system 00:03: [io 0x0600-0x061f] has been reserved
system 00:03: [io 0xfd60-0xfd63] has been reserved
system 00:03: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
pnp 00:05: Plug and Play ACPI device, IDs SYN1b7e PNP0f13 (active)
system 00:06: [mem 0xe0000000-0xefffffff] could not be reserved
system 00:06: [mem 0xfed01000-0xfed01fff] has been reserved
system 00:06: [mem 0xfed03000-0xfed03fff] has been reserved
system 00:06: [mem 0xfed04000-0xfed04fff] has been reserved
system 00:06: [mem 0xfed0c000-0xfed0ffff] has been reserved
system 00:06: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:06: [mem 0xfed1c000-0xfed1cfff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:06: [mem 0xfef00000-0xfeffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
ACPI: bus type PNP unregistered
pci 0000:01:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
pci 0000:00:1c.0: BAR 15: can't assign mem pref (size 0x100000)
pci 0000:01:00.0: BAR 6: assigned [mem 0x90510000-0x9051ffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0x90500000-0x905fffff]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [mem 0x90400000-0x904fffff]
pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc
pci_bus 0000:00: resource 4 [io 0x0000-0x006f]
pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
pci_bus 0000:00: resource 10 [mem 0x80000000-0x908ffffe]
pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:01: resource 1 [mem 0x90500000-0x905fffff]
pci_bus 0000:02: resource 1 [mem 0x90400000-0x904fffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18896K (ffff88003ed87000 - ffff88003fffb000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x70bfc000-0x74bfc000] (64MB) mapped at [ffff880070bfc000-ffff880074bfbfff]
microcode: CPU0 sig=0x30678, pf=0x8, revision=0x815
microcode: CPU1 sig=0x30678, pf=0x8, revision=0x815
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1454353351.152:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 7667
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0x80000000, mapped to 0xffffc90004780000, using 4128k, total 4128k
efifb: mode is 1366x768x32, linelength=5504, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 170x48
fb0: EFI VGA frame buffer device
intel_idle: does not run on family 6 model 55
ipmi message handler version 39.2
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [ACAD] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: acpi_idle registered with cpuidle
[Firmware Bug]: No valid trip found
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 103 for MSI/MSI-X
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-76-generic xhci_hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-76-generic xhci_hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
[Firmware Bug]: battery: (dis)charge rate invalid.
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
ACPI: Battery Slot [BAT1] (battery present)
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 4896e7e7a5a8cc7d655d1cff9be9cc10866496fb'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 4:27:40
bdi 7:5: hash matches
rtc_cmos 00:00: setting system clock to 2016-02-01 19:02:32 UTC (1454353352)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 780K (ffff88000173d000 - ffff880001800000)
Freeing unused kernel memory: 680K (ffff880001b56000 - ffff880001c00000)
systemd-udevd[104]: starting version 204
usb 1-2: new high-speed USB device number 2 using xhci_hcd
rtsx_pci 0000:01:00.0: irq 104 for MSI/MSI-X
rtsx_pci 0000:01:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 104
ahci 0000:00:13.0: version 3.0
ahci 0000:00:13.0: irq 105 for MSI/MSI-X
usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-2: Product: USB2.0 Hub
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 3 ports detected
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.1: can't disable ASPM; OS doesn't have ASPM control
ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso sadm sds
scsi0 : ahci
scsi1 : ahci
r8169 0000:01:00.1: irq 106 for MSI/MSI-X
r8169 0000:01:00.1 eth0: RTL8411 at 0xffffc90000666000, f8:a9:63:e3:f1:2e, XID 1c800800 IRQ 106
r8169 0000:01:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ata1: SATA max UDMA/133 abar m2048@0x9081f000 port 0x9081f100 irq 105
ata2: SATA max UDMA/133 abar m2048@0x9081f000 port 0x9081f180 irq 105
usb 1-4: new high-speed USB device number 3 using xhci_hcd
usb 1-4: New USB device found, idVendor=04f2, idProduct=b452
usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-4: Product: HD WebCam
usb 1-4: Manufacturer: Chicony Electronics Co.,Ltd.
usb 1-4: SerialNumber: 0001
usb 1-2.1: new full-speed USB device number 4 using xhci_hcd
usb 1-2.1: New USB device found, idVendor=04ca, idProduct=2009
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
usb 1-2.1: Product: BCM43142A0
ata2.00: ATAPI: HL-DT-ST DVDRAM GUA0N, 1.00, max UDMA/133
usb 1-2.1: Manufacturer: Broadcom Corp
usb 1-2.1: SerialNumber: 18CF5EAB9FC5
ata2.00: configured for UDMA/133
tsc: Refined TSC clocksource calibration: 2166.666 MHz
ata1.00: ATA-8: ST500LT012-1DG142, 0001SDM1, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST500LT012-1DG14 0001 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GUA0N 1.00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
sd 0:0:0:0: [sda] Attached SCSI disk
psmouse serio1: synaptics: queried max coordinates: x [..5662], y [..4656]
psmouse serio1: synaptics: queried min coordinates: x [1280..], y [1198..]
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd40123/0x840300/0x12e800, board id: 2970, fw id: 1627477
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
Switched to clocksource tsc
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
random: nonblocking pool is initialized
init: plymouth-upstart-bridge main process (161) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (175) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (177) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (179) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (181) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (183) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (185) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (187) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (189) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (191) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (193) terminated with status 1
init: plymouth-upstart-bridge respawning too fast, stopped
Adding 4075516k swap on /dev/sda7. Priority:-1 extents:1 across:4075516k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[301]: starting version 204
wmi: Mapper loaded
acer_wmi: Acer Laptop ACPI-WMI Extras
acer_wmi: Function bitmap for Communication Button: 0x801
acer_wmi: Brightness must be controlled by acpi video driver
acer_wmi: Enabling Launch Manager failed: 0xe4 - 0x0
input: Acer WMI hotkeys as /devices/virtual/input/input7
input: Acer BMA150 accelerometer as /devices/virtual/input/input8
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
[drm] Initialized drm 1.1.0 20060810
[drm] Memory usable by graphics device = 2048M
checking generic (80000000 408000) vs hw (80000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: irq 107 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
type=1400 audit(1454353367.691:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=370 comm="apparmor_parser"
type=1400 audit(1454353367.691:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=370 comm="apparmor_parser"
type=1400 audit(1454353367.691:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=370 comm="apparmor_parser"
type=1400 audit(1454353367.695:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=370 comm="apparmor_parser"
type=1400 audit(1454353367.695:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=370 comm="apparmor_parser"
type=1400 audit(1454353367.695:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=370 comm="apparmor_parser"
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b452)
input: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input9
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:30: registered as cooling_device3
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input10
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
snd_hda_intel 0000:00:1b.0: irq 108 for MSI/MSI-X
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
cfg80211: Calling CRDA to update world regulatory domain
wl: module license 'MIXED/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
wl: module verification failed: signature and/or required key missing - tainting kernel
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
SKU: Nid=0x1d sku_cfg=0x40e00001
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000000
SKU: customization=0x00000000
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Mic=0x12
realtek: No valid SSID, checking pincfg 0x40e00001 for NID 0x1d
realtek: Enabling init ASM_ID=0x0001 CODEC_ID=10ec0283
wlan0: Broadcom BCM4365 802.11 Hybrid Wireless Controller 6.30.223.248 (r487574)
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
r8169 0000:01:00.1 eth0: link down
r8169 0000:01:00.1 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
type=1400 audit(1454353374.055:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=736 comm="apparmor_parser"
type=1400 audit(1454353374.055:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=736 comm="apparmor_parser"
type=1400 audit(1454353374.059:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=736 comm="apparmor_parser"
init: cups main process (750) killed by HUP signal
init: cups main process ended, respawning
r8169 0000:01:00.1 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: failsafe main process (546) killed by TERM signal
type=1400 audit(1454353379.227:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=988 comm="apparmor_parser"
type=1400 audit(1454353379.227:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=988 comm="apparmor_parser"
type=1400 audit(1454353379.227:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=988 comm="apparmor_parser"
type=1400 audit(1454353379.227:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=988 comm="apparmor_parser"
type=1400 audit(1454353379.227:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=988 comm="apparmor_parser"
type=1400 audit(1454353379.231:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=988 comm="apparmor_parser"
type=1400 audit(1454353379.239:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=989 comm="apparmor_parser"
type=1400 audit(1454353379.239:18): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=989 comm="apparmor_parser"
type=1400 audit(1454353379.239:19): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=989 comm="apparmor_parser"
type=1400 audit(1454353379.239:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=989 comm="apparmor_parser"
init: plymouth-stop pre-start process (1371) terminated with status 1
audit_printk_skb: 117 callbacks suppressed
type=1400 audit(1454353391.548:60): apparmor="DENIED" operation="mkdir" profile="/usr/lib/telepathy/mission-control-5" name="/var/lib/gdm/.config/libaccounts-glib/" pid=1476 comm="mission-control" requested_mask="c" denied_mask="c" fsuid=113 ouid=113
type=1400 audit(1454353391.552:61): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/mission-control-5" name="/etc/dconf/profile/gdm" pid=1476 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=113 ouid=0
type=1400 audit(1454353403.120:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1514 comm="apparmor_parser"
type=1400 audit(1454353403.120:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1514 comm="apparmor_parser"
type=1400 audit(1454353403.120:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1514 comm="apparmor_parser"
[drm:vlv_set_rps_idle] *ERROR* timed out waiting for Punit
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
NTFS driver 2.1.30 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
xor: measuring software checksum speed
prefetch64-sse: 8836.000 MB/sec
generic_sse: 7903.000 MB/sec
xor: using function: prefetch64-sse (8836.000 MB/sec)
raid6: sse2x1 733 MB/s
raid6: sse2x2 750 MB/s
raid6: sse2x4 1210 MB/s
raid6: using algorithm sse2x4 (1210 MB/s)
raid6: using ssse3x2 recovery algorithm
bio: create slab at 1
Btrfs loaded
[drm:vlv_set_rps_idle] *ERROR* timed out waiting for Punit
perf samples too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[drm:vlv_set_rps_idle] *ERROR* timed out waiting for Punit
[drm:vlv_set_rps_idle] *ERROR* timed out waiting for Punit
[drm:vlv_set_rps_idle] *ERROR* timed out waiting for Punit
[drm:vlv_set_rps_idle] *ERROR* timed out waiting for Punit
[drm:vlv_set_rps_idle] *ERROR* timed out waiting for Punit