dmesg - CPU
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-53-generic (buildd@lgw01-45) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #72~14.04.1-Ubuntu SMP Fri Nov 6 18:17:23 UTC 2015 (Ubuntu 3.16.0-53.72~14.04.1-generic 3.16.7-ckt18)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009b7ff] usable
BIOS-e820: [mem 0x000000000009b800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000d0000-0x00000000000d3fff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bfecffff] usable
BIOS-e820: [mem 0x00000000bfed0000-0x00000000bfee0fff] ACPI NVS
BIOS-e820: [mem 0x00000000bfee1000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Acer, inc. Aspire 5920G /Chapala , BIOS v1.3708 08/15/2007
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-DBFFF uncachable
DC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0C0000000 mask FC0000000 uncachable
1 base 000000000 mask F00000000 write-back
2 base 100000000 mask FC0000000 write-back
3 base 0BFF00000 mask FFFF00000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 3GB, range: 1GB, type UC
reg 1, base: 0GB, range: 4GB, type WB
reg 2, base: 4GB, range: 1GB, type WB
reg 3, base: 3071MB, range: 1MB, type UC
total RAM covered: 4095M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 2M num_reg: 4 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3071MB, range: 1MB, type UC
reg 3, base: 4GB, range: 1GB, type WB
e820: update [mem 0xbff00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbfed0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f7b80-0x000f7b8f] mapped at [ffff8800000f7b80]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000095000] 95000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fbe000, 0x01fbefff] PGTABLE
BRK [0x01fbf000, 0x01fbffff] PGTABLE
BRK [0x01fc0000, 0x01fc0fff] PGTABLE
init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[mem 0x13fe00000-0x13fffffff] page 2M
BRK [0x01fc1000, 0x01fc1fff] PGTABLE
init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[mem 0x13c000000-0x13fdfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x13bffffff]
[mem 0x100000000-0x13bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbfecffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xbfdfffff] page 2M
[mem 0xbfe00000-0xbfecffff] page 4k
RAMDISK: [mem 0x35ad6000-0x36d62fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F7B50 000024 (v02 PTLTD )
ACPI: XSDT 0x00000000BFED387D 00007C (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000)
ACPI: FACP 0x00000000BFEDDC2A 0000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
ACPI: DSDT 0x00000000BFED4C20 008F96 (v02 INTEL CRESTLNE 06040000 MSFT 03000001)
ACPI: FACS 0x00000000BFEE0FC0 000040
ACPI: FACS 0x00000000BFEE0FC0 000040
ACPI: APIC 0x00000000BFEDDD1E 000068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
ACPI: HPET 0x00000000BFEDDD86 000038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
ACPI: MCFG 0x00000000BFEDDDBE 00003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
ACPI: APIC 0x00000000BFEDDDFA 000068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: BOOT 0x00000000BFEDDE62 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SLIC 0x00000000BFEDDE8A 000176 (v01 ACRSYS ACRPRDCT 06040000 acer 00000000)
ACPI: SSDT 0x00000000BFED4943 0002DD (v01 SataRe SataAhci 00001000 INTL 20050624)
ACPI: SSDT 0x00000000BFED3E85 00025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
ACPI: SSDT 0x00000000BFED3DDF 0000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
ACPI: SSDT 0x00000000BFED38F9 0004E6 (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
Initmem setup node 0 [mem 0x00000000-0x13fffffff]
NODE_DATA [mem 0x13fff8000-0x13fffcfff]
[ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x13fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009afff]
node 0: [mem 0x00100000-0xbfecffff]
node 0: [mem 0x100000000-0x13fffffff]
On node 0 totalpages: 1048170
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3994 pages, LIFO batch:0
DMA32 zone: 12220 pages used for memmap
DMA32 zone: 782032 pages, LIFO batch:31
Normal zone: 4096 pages used for memmap
Normal zone: 262144 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff]
PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000cffff]
PM: Registered nosave memory: [mem 0x000d0000-0x000d3fff]
PM: Registered nosave memory: [mem 0x000d4000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbfed0000-0xbfee0fff]
PM: Registered nosave memory: [mem 0xbfee1000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed13fff]
PM: Registered nosave memory: [mem 0xfed14000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s81408 r8192 d20992 u1048576
pcpu-alloc: s81408 r8192 d20992 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031769
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 4025368K/4192680K available (7634K kernel code, 1131K rwdata, 3616K rodata, 1356K init, 1300K bss, 167312K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-1.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS:16640 nr_irqs:512 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1999.974 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.94 BogoMIPS (lpj=7999896)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 32K (ffffffff81e6f000 - ffffffff81e77000)
ftrace: allocating 29286 entries in 115 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz (fam: 06, model: 0f, stepping: 0a)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
.... node #0, CPUs: #1
CPU1: Thermal monitoring handled by SMI
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (7999.89 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xbfed0000-0xbfee0fff] (69632 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 23:19:24, date: 01/21/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88013B00FC00 00027A (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880139AA5800 000498 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880139A7DE00 0000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880139411B40 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
ACPI Error: [CDW1] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88013b023eb0), AE_NOT_FOUND (20140424/psparse-536)
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
pci 0000:00:01.0: [8086:2a01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0x1800-0x181f]
pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0x1820-0x183f]
pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xf3604800-0xf3604bff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf3600000-0xf3603fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:2849] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x1840-0x185f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x1860-0x187f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x1880-0x189f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xf3604c00-0xf3604fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
pci 0000:00:1f.0: can't claim BAR 13 [io 0x1000-0x107f]: address conflict with ACPI CPU throttle [io 0x1010-0x1015]
pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0600 (mask 003f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007)
pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 0x20: [io 0x18a0-0x18af]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x18d8-0x18df]
pci 0000:00:1f.2: reg 0x14: [io 0x18cc-0x18cf]
pci 0000:00:1f.2: reg 0x18: [io 0x18d0-0x18d7]
pci 0000:00:1f.2: reg 0x1c: [io 0x18c8-0x18cb]
pci 0000:00:1f.2: reg 0x20: [io 0x18e0-0x18ff]
pci 0000:00:1f.2: reg 0x24: [mem 0xf3604000-0xf36047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff]
pci 0000:00:1f.3: reg 0x20: [io 0x1c00-0x1c1f]
pci 0000:01:00.0: [10de:0407] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf2000000-0xf2ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit]
pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf2ffffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 02-03]
pci 0000:00:1c.0: bridge window [io 0x0000-0x0fff]
pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000fffff]
pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
pci 0000:04:00.0: [8086:444e] type 00 class 0x058000
pci 0000:04:00.0: reg 0x10: [mem 0x00000000-0x000003ff]
pci 0000:04:00.0: reg 0x18: [io 0x0000-0x007f]
pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:00:1c.1: PCI bridge to [bus 04]
pci 0000:00:1c.1: bridge window [io 0x0000-0x0fff]
pci 0000:00:1c.1: bridge window [mem 0x00000000-0x000fffff]
pci 0000:00:1c.1: bridge window [mem 0x00000000-0x000fffff 64bit pref]
pci 0000:06:00.0: [8086:4229] type 00 class 0x028000
pci 0000:06:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 06]
pci 0000:00:1c.3: bridge window [io 0x0000-0x0fff]
pci 0000:00:1c.3: bridge window [mem 0x00000000-0x000fffff]
pci 0000:00:1c.3: bridge window [mem 0x00000000-0x000fffff 64bit pref]
pci 0000:08:00.0: [14e4:1693] type 00 class 0x020000
pci 0000:08:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit]
pci 0000:08:00.0: PME# supported from D3hot D3cold
pci 0000:08:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: PCI bridge to [bus 08]
pci 0000:00:1c.5: bridge window [io 0x0000-0x0fff]
pci 0000:00:1c.5: bridge window [mem 0x00000000-0x000fffff]
pci 0000:00:1c.5: bridge window [mem 0x00000000-0x000fffff 64bit pref]
pci 0000:0a:09.0: [1180:0832] type 00 class 0x0c0010
pci 0000:0a:09.0: proprietary Ricoh MMC controller disabled (via firewire function)
pci 0000:0a:09.0: MMC cards are now supported by standard SDHCI controller
pci 0000:0a:09.0: reg 0x10: [mem 0xf3300000-0xf33007ff]
pci 0000:0a:09.0: supports D1 D2
pci 0000:0a:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0a:09.1: [1180:0822] type 00 class 0x080500
pci 0000:0a:09.1: reg 0x10: [mem 0xf3300800-0xf33008ff]
pci 0000:0a:09.1: supports D1 D2
pci 0000:0a:09.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0a:09.2: [1180:0592] type 00 class 0x088000
pci 0000:0a:09.2: reg 0x10: [mem 0xf3301000-0xf33010ff]
pci 0000:0a:09.2: supports D1 D2
pci 0000:0a:09.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0a:09.3: [1180:0852] type 00 class 0x088000
pci 0000:0a:09.3: reg 0x10: [mem 0xf3301400-0xf33014ff]
pci 0000:0a:09.3: supports D1 D2
pci 0000:0a:09.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf3300000-0xf33fffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)
ACPI: Enabled 7 GPEs in block 00 to 1F
ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009b800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbfed0000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
pnp 00:02: disabling [io 0x002e-0x002f] because it overlaps 0000:04:00.0 BAR 2 [io 0x0000-0x007f]
pnp 00:02: disabling [io 0x004e-0x004f] because it overlaps 0000:04:00.0 BAR 2 [io 0x0000-0x007f]
pnp 00:02: disabling [io 0x0061] because it overlaps 0000:04:00.0 BAR 2 [io 0x0000-0x007f]
pnp 00:02: disabling [io 0x0063] because it overlaps 0000:04:00.0 BAR 2 [io 0x0000-0x007f]
pnp 00:02: disabling [io 0x0065] because it overlaps 0000:04:00.0 BAR 2 [io 0x0000-0x007f]
pnp 00:02: disabling [io 0x0067] because it overlaps 0000:04:00.0 BAR 2 [io 0x0000-0x007f]
pnp 00:02: disabling [io 0x0068-0x006f] because it overlaps 0000:04:00.0 BAR 2 [io 0x0000-0x007f]
system 00:02: [io 0x0680-0x069f] has been reserved
system 00:02: [io 0x0800-0x080f] has been reserved
system 00:02: [io 0x1000-0x107f] could not be reserved
system 00:02: [io 0x1180-0x11bf] has been reserved
system 00:02: [io 0x1640-0x164f] has been reserved
system 00:02: [io 0xfe00] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:05: Plug and Play ACPI device, IDs SYN1b03 SYN1b00 SYN0002 PNP0f13 (active)
pnp: PnP ACPI: found 6 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02-03] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-03] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02-03] add_size 200000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x001fffff] to [bus 04] add_size 200000
pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x001fffff] to [bus 06] add_size 200000
pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000
pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000
pci 0000:00:1c.5: bridge window [mem 0x00100000-0x001fffff] to [bus 08] add_size 200000
pci 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x001fffff] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x001fffff] get_res_add_size add_size 200000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.5: res[14]=[mem 0x00100000-0x001fffff] get_res_add_size add_size 200000
pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:00:1c.1: BAR 14: assigned [mem 0xc0400000-0xc06fffff]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0700000-0xc08fffff 64bit pref]
pci 0000:00:1c.3: BAR 14: assigned [mem 0xc0900000-0xc0bfffff]
pci 0000:00:1c.3: BAR 15: assigned [mem 0xc0c00000-0xc0dfffff 64bit pref]
pci 0000:00:1c.5: BAR 14: assigned [mem 0xc0e00000-0xc10fffff]
pci 0000:00:1c.5: BAR 15: assigned [mem 0xc1100000-0xc12fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
pci 0000:00:1c.3: BAR 13: assigned [io 0x5000-0x5fff]
pci 0000:00:1c.5: BAR 13: assigned [io 0x6000-0x6fff]
pci 0000:00:1f.3: BAR 0: assigned [mem 0xc1300000-0xc13000ff]
pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf2ffffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-03]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:04:00.0: BAR 6: assigned [mem 0xc0400000-0xc040ffff pref]
pci 0000:04:00.0: BAR 0: assigned [mem 0xc0410000-0xc04103ff]
pci 0000:04:00.0: BAR 2: assigned [io 0x4000-0x407f]
pci 0000:00:1c.1: PCI bridge to [bus 04]
pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc06fffff]
pci 0000:00:1c.1: bridge window [mem 0xc0700000-0xc08fffff 64bit pref]
pci 0000:06:00.0: BAR 0: assigned [mem 0xc0900000-0xc0901fff 64bit]
pci 0000:00:1c.3: PCI bridge to [bus 06]
pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.3: bridge window [mem 0xc0900000-0xc0bfffff]
pci 0000:00:1c.3: bridge window [mem 0xc0c00000-0xc0dfffff 64bit pref]
pci 0000:08:00.0: BAR 0: assigned [mem 0xc0e00000-0xc0e0ffff 64bit]
pci 0000:00:1c.5: PCI bridge to [bus 08]
pci 0000:00:1c.5: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.5: bridge window [mem 0xc0e00000-0xc10fffff]
pci 0000:00:1c.5: bridge window [mem 0xc1100000-0xc12fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0a]
pci 0000:00:1e.0: bridge window [mem 0xf3300000-0xf33fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf2ffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff]
pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:04: resource 1 [mem 0xc0400000-0xc06fffff]
pci_bus 0000:04: resource 2 [mem 0xc0700000-0xc08fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:06: resource 1 [mem 0xc0900000-0xc0bfffff]
pci_bus 0000:06: resource 2 [mem 0xc0c00000-0xc0dfffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:08: resource 1 [mem 0xc0e00000-0xc10fffff]
pci_bus 0000:08: resource 2 [mem 0xc1100000-0xc12fffff 64bit pref]
pci_bus 0000:0a: resource 1 [mem 0xf3300000-0xf33fffff]
pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0a: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:0a: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:0a: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:0a: resource 10 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:0a: resource 11 [mem 0xf0000000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18996K (ffff880035ad6000 - ffff880036d63000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbbed0000-0xbfed0000] (64MB) mapped at [ffff8800bbed0000-ffff8800bfecffff]
Simple Boot Flag at 0x35 set to 0x1
microcode: CPU0 sig=0x6fa, pf=0x80, revision=0x92
microcode: CPU1 sig=0x6fa, pf=0x80, revision=0x92
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 512 (order: 3, 32768 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1453418363.620:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
msgmni has been set to 7899
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.1: enabling device (0000 -> 0003)
pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.3: enabling device (0000 -> 0003)
pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.5: enabling device (0000 -> 0003)
pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xf1000000, mapped to 0xffffc90010780000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 15
ACPI: AC Adapter [ACAD] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (63 C)
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT1] (battery absent)
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xf3604800
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-53-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xf3604c00
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-53-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.16.0-53-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.16.0-53-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.16.0-53-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.16.0-53-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.16.0-53-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: eabdacaf3a4b5ec164b4ee226a09f9d1b2bceb6d'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 0:260:353
rtc_cmos 00:03: setting system clock to 2016-01-21 23:19:24 UTC (1453418364)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
ata1.00: ATAPI: Optiarc DVD RW AD-7560A, DX06, max UDMA/33
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM Optiarc DVD RW AD-7560A DX06 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
Freeing unused kernel memory: 1356K (ffffffff81d1c000 - ffffffff81e6f000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 548K (ffff880001777000 - ffff880001800000)
Freeing unused kernel memory: 480K (ffff880001b88000 - ffff880001c00000)
systemd-udevd[106]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
tg3.c:v3.137 (May 11, 2014)
tg3 0000:08:00.0: enabling device (0000 -> 0002)
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:0a:09.1: SDHCI controller found [1180:0822] (rev 22)
sdhci-pci 0000:0a:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
mmc0: no vqmmc regulator found
mmc0: no vmmc regulator found
sdhci-pci 0000:0a:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
scsi2 : ahci
mmc0: SDHCI controller on PCI [0000:0a:09.1] using DMA
scsi3 : ahci
scsi4 : ahci
ata3: SATA max UDMA/133 abar m2048@0xf3604000 port 0xf3604100 irq 45
ata4: DUMMY
ata5: DUMMY
usb 1-2: new high-speed USB device number 2 using ehci-pci
tg3 0000:08:00.0 eth0: Tigon3 [partno(BCM95787m) rev b002] (PCI Express) MAC address 00:1b:24:9c:68:fc
tg3 0000:08:00.0 eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:08:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:08:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
firewire_ohci 0000:0a:09.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
usb 1-2: New USB device found, idVendor=064e, idProduct=a101
usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 1-2: Product: Acer CrystalEye webcam
usb 1-2: Manufacturer: SuYin
usb 1-2: SerialNumber: CN0314-OV03-VA-R02.00.00
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: unexpected _GTF length (8)
ata3.00: ATA-8: WDC WD6400BEVT-22A0RT0, 01.01A01, max UDMA/133
ata3.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: unexpected _GTF length (8)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD6400BEVT-2 1A01 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
sd 2:0:0:0: [sda] Attached SCSI disk
usb 5-2: new low-speed USB device number 2 using uhci_hcd
firewire_core 0000:0a:09.0: created device fw0: GUID 00241b00f96b5900, S400
usb 5-2: device descriptor read/64, error -71
psmouse serio3: synaptics: Touchpad model: 1, fw: 6.5, id: 0x1e0b1, caps: 0xc04751/0xe0500f/0x10000, board id: 0, fw id: 355389
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input11
usb 5-2: New USB device found, idVendor=13ee, idProduct=0001
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: AND
usb 5-2: Manufacturer: MOON
usb 5-2: SerialNumber: @\xffffffc9\xffffff8c\xffffff8cAB
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: MOON AND as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/0003:13EE:0001.0001/input/input13
hid-generic 0003:13EE:0001.0001: input,hidraw0: USB HID v1.00 Mouse [MOON AND ] on usb-0000:00:1d.0-2/input0
psmouse serio4: synaptics: Touchpad model: 1, fw: 6.5, id: 0x81a0b1, caps: 0xa04711/0xa04000/0x0, board id: 0, fw id: 350306
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12
random: nonblocking pool is initialized
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
Adding 8388604k swap on /dev/sda6. Priority:-1 extents:1 across:8388604k FS
systemd-udevd[280]: starting version 204
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
wmi: Mapper loaded
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[drm] Initialized drm 1.1.0 20060810
acpi device:02: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input14
checking generic (f1000000 130000) vs hw (d0000000 10000000)
checking generic (f1000000 130000) vs hw (f0000000 2000000)
fb: switching to nouveaufb from VESA VGA
Console: switching to colour dummy device 80x25
nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x084700a2
nouveau [ DEVICE][0000:01:00.0] Chipset: G84 (NV84)
nouveau [ DEVICE][0000:01:00.0] Family : NV50
nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
nouveau [ VBIOS][0000:01:00.0] BIT signature found
nouveau [ VBIOS][0000:01:00.0] version 60.84.41.00.09
cfg80211: Calling CRDA to update world regulatory domain
r592: driver successfully loaded
ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000107F (\PMIO) (20140424/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\GPIO) (20140424/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\GPIO) (20140424/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
nouveau 0000:01:00.0: irq 46 for MSI/MSI-X
nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
nouveau [ PFB][0000:01:00.0] RAM type: DDR2
nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB
nouveau [ PFB][0000:01:00.0] ZCOMP: 1892 tags
nouveau [ VOLT][0000:01:00.0] GPU voltage: 1150000uv
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
nouveau [ PTHERM][0000:01:00.0] fan management: automatic
nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
nouveau [ CLK][0000:01:00.0] 20: core 169 MHz shader 338 MHz memory 100 MHz
nouveau [ CLK][0000:01:00.0] 21: core 275 MHz shader 550 MHz memory 200 MHz
nouveau [ CLK][0000:01:00.0] 22: core 475 MHz shader 950 MHz memory 400 MHz
nouveau [ CLK][0000:01:00.0] --: core 275 MHz shader 550 MHz memory 185 MHz
[TTM] Zone kernel: Available graphics memory: 2023390 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 512 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 01000323 00010034
nouveau [ DRM] DCB outp 01: 02012300 00000028
nouveau [ DRM] DCB outp 02: 02026312 00020010
nouveau [ DRM] DCB outp 03: 010333f1 00c0c080
nouveau [ DRM] DCB conn 00: 0040
nouveau [ DRM] DCB conn 01: 2130
nouveau [ DRM] DCB conn 02: 0200
nouveau [ DRM] DCB conn 03: 0310
nouveau [ DRM] DCB conn 04: 0311
nouveau [ DRM] DCB conn 05: 0313
nouveau [ DRM] DCB conn 06: 1461
iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
iwl4965: Copyright(c) 2003-2011 Intel Corporation
iwl4965 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
iwl4965 0000:06:00.0: enabling device (0000 -> 0002)
iwl4965 0000:06:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
nouveau W[ DRM] failed to create encoder 0/1/0: -19
nouveau W[ DRM] TV-1 has no encoders, removing
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau [ DRM] MM: using CRYPT for buffer copies
iwl4965 0000:06:00.0: device EEPROM VER=0x36, CALIB=0x5
r852: driver loaded successfully
iwl4965 0000:06:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
iwl4965 0000:06:00.0: irq 47 for MSI/MSI-X
audit: type=1400 audit(1453414782.505:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=327 comm="apparmor_parser"
audit: type=1400 audit(1453414782.505:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=327 comm="apparmor_parser"
audit: type=1400 audit(1453414782.505:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=327 comm="apparmor_parser"
audit: type=1400 audit(1453414782.505:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=327 comm="apparmor_parser"
audit: type=1400 audit(1453414782.505:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=327 comm="apparmor_parser"
audit: type=1400 audit(1453414782.509:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=327 comm="apparmor_parser"
audit: type=1400 audit(1453414782.545:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=355 comm="apparmor_parser"
audit: type=1400 audit(1453414782.545:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=355 comm="apparmor_parser"
audit: type=1400 audit(1453414782.545:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=355 comm="apparmor_parser"
audit: type=1400 audit(1453414782.545:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=355 comm="apparmor_parser"
iwl4965 0000:06:00.0: loaded firmware version 228.61.2.24
ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs'
snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
acer_wmi: Acer Laptop ACPI-WMI Extras
acer_wmi: Function bitmap for Communication Device: 0x17
acer_wmi: Brightness must be controlled by acpi video driver
input: Acer BMA150 accelerometer as /devices/virtual/input/input15
sound hdaudioC0D0: autoconfig: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: dig-out=0x11/0x1e
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Internal Mic=0x19
sound hdaudioC0D0: Mic=0x18
sound hdaudioC0D0: Line=0x1a
sound hdaudioC0D1: autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
sound hdaudioC0D1: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D1: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D1: mono: mono_out=0x0
sound hdaudioC0D1: inputs:
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
media: Linux media interface: v0.10
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Acer CrystalEye webcam (064e:a101)
input: Acer CrystalEye webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input19
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
usb 7-1: new full-speed USB device number 2 using uhci_hcd
nouveau [ DRM] allocated 1280x800 fb: 0x70000, bo ffff8800b9be0000
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 160x50
nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:01:00.0: registered panic notifier
[drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 0
usb 7-1: New USB device found, idVendor=0a5c, idProduct=2101
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-1: Product: Acer Module
usb 7-1: Manufacturer: Broadcom Corp
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
usb 7-1: USB disconnect, device number 2
init: failsafe main process (614) killed by TERM signal
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
audit_printk_skb: 33 callbacks suppressed
audit: type=1400 audit(1453414787.605:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=690 comm="apparmor_parser"
audit: type=1400 audit(1453414787.605:24): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=690 comm="apparmor_parser"
audit: type=1400 audit(1453414787.605:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=690 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: avahi-dnsconfd main process (703) terminated with status 1
init: avahi-dnsconfd main process ended, respawning
init: avahi-dnsconfd main process (707) terminated with status 1
init: avahi-dnsconfd main process ended, respawning
init: cups main process (691) killed by HUP signal
init: cups main process ended, respawning
audit: type=1400 audit(1453414789.205:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=778 comm="apparmor_parser"
audit: type=1400 audit(1453414789.205:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=778 comm="apparmor_parser"
audit: type=1400 audit(1453414789.205:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=778 comm="apparmor_parser"
audit: type=1400 audit(1453414789.205:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=778 comm="apparmor_parser"
audit: type=1400 audit(1453414789.205:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=778 comm="apparmor_parser"
audit: type=1400 audit(1453414789.205:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=778 comm="apparmor_parser"
audit: type=1400 audit(1453414789.213:32): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=780 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
tg3 0000:08:00.0: irq 49 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: samba-ad-dc main process (925) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1269) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
wlan0: authenticate with 88:03:55:49:fc:a8
wlan0: send auth to 88:03:55:49:fc:a8 (try 1/3)
wlan0: authenticated
wlan0: associating with AP with corrupt beacon and probe response
wlan0: associate with 88:03:55:49:fc:a8 (try 1/3)
wlan0: RX AssocResp from 88:03:55:49:fc:a8 (capab=0x431 status=0 aid=18)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: ES
cfg80211: Regulatory domain changed to country: ES
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm), (0 s)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
wlan0: deauthenticating from 88:03:55:49:fc:a8 by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 88:03:55:49:fc:a8
wlan0: send auth to 88:03:55:49:fc:a8 (try 1/3)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: authenticated
wlan0: associating with AP with corrupt beacon and probe response
wlan0: associate with 88:03:55:49:fc:a8 (try 1/3)
wlan0: RX AssocResp from 88:03:55:49:fc:a8 (capab=0x431 status=0 aid=18)
wlan0: associated
cfg80211: Calling CRDA for country: ES
cfg80211: Regulatory domain changed to country: ES
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm), (0 s)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
audit_printk_skb: 72 callbacks suppressed
audit: type=1400 audit(1453414809.205:57): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/mission-control-5" name="/etc/dconf/profile/gdm" pid=1822 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=117 ouid=0
audit: type=1400 audit(1453414817.721:58): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1885 comm="apparmor_parser"
audit: type=1400 audit(1453414817.721:59): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1885 comm="apparmor_parser"
audit: type=1400 audit(1453414817.721:60): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1885 comm="apparmor_parser"
usb 2-3: new high-speed USB device number 4 using ehci-pci
usb 2-3: New USB device found, idVendor=0930, idProduct=6545
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3: Product: TransMemory
usb 2-3: Manufacturer: TOSHIBA
usb 2-3: SerialNumber: 50465D4C9881EF8030005451
usb-storage 2-3:1.0: USB Mass Storage device detected
scsi5 : usb-storage 2-3:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 5:0:0:0: Direct-Access TOSHIBA TransMemory PMAP PQ: 0 ANSI: 6
sd 5:0:0:0: Attached scsi generic sg2 type 0
sd 5:0:0:0: [sdb] 30497664 512-byte logical blocks: (15.6 GB/14.5 GiB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 5:0:0:0: [sdb] No Caching mode page found
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 5:0:0:0: [sdb] Attached SCSI removable disk
audit: type=1400 audit(1453415090.735:61): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2680 comm="apparmor_parser"
audit: type=1400 audit(1453415090.735:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2680 comm="apparmor_parser"
audit: type=1400 audit(1453415090.735:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2680 comm="apparmor_parser"
perf interrupt took too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[sched_delayed] \x014CE: hpet increased min_delta_ns to 20115 nsec
nouveau E[gnome-shell[2100]] multiple instances of buffer 190 on validation list
nouveau E[gnome-shell[2100]] validate_init
nouveau E[gnome-shell[2100]] validate: -22
nouveau E[gnome-shell[2100]] multiple instances of buffer 203 on validation list
nouveau E[gnome-shell[2100]] validate_init
nouveau E[gnome-shell[2100]] validate: -22
perf interrupt took too long (5016 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: authenticate with 88:03:55:49:fc:a8
wlan0: send auth to 88:03:55:49:fc:a8 (try 1/3)
wlan0: authenticated
wlan0: associating with AP with corrupt beacon and probe response
wlan0: associate with 88:03:55:49:fc:a8 (try 1/3)
wlan0: RX AssocResp from 88:03:55:49:fc:a8 (capab=0x431 status=0 aid=18)
wlan0: associated
cfg80211: Calling CRDA for country: ES
cfg80211: Regulatory domain changed to country: ES
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm), (0 s)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
wlan0: deauthenticating from 88:03:55:49:fc:a8 by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 88:03:55:49:fc:a8
wlan0: send auth to 88:03:55:49:fc:a8 (try 1/3)
wlan0: authenticated
wlan0: associating with AP with corrupt beacon and probe response
wlan0: associate with 88:03:55:49:fc:a8 (try 1/3)
wlan0: RX AssocResp from 88:03:55:49:fc:a8 (capab=0x431 status=0 aid=18)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: ES
cfg80211: Regulatory domain changed to country: ES
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm), (0 s)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
wlan0: deauthenticating from 88:03:55:49:fc:a8 by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 88:03:55:49:fc:a8
wlan0: send auth to 88:03:55:49:fc:a8 (try 1/3)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticated
wlan0: associating with AP with corrupt beacon and probe response
wlan0: associate with 88:03:55:49:fc:a8 (try 1/3)
wlan0: RX AssocResp from 88:03:55:49:fc:a8 (capab=0x431 status=0 aid=18)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: ES
cfg80211: Regulatory domain changed to country: ES
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm), (0 s)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
audit: type=1400 audit(1453446018.187:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=8143 comm="apparmor_parser"
audit: type=1400 audit(1453446018.187:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=8143 comm="apparmor_parser"
audit: type=1400 audit(1453446018.187:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=8143 comm="apparmor_parser"
usb usb5-port2: disabled by hub (EMI?), re-enabling...
usb 5-2: USB disconnect, device number 2
usb 5-2: new low-speed USB device number 3 using uhci_hcd
usb 5-2: device descriptor read/64, error -71
usb 5-2: New USB device found, idVendor=13ee, idProduct=0001
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: AND
usb 5-2: Manufacturer: MOON
usb 5-2: SerialNumber: @\xffffffc9\xffffff8c\xffffff8cAB
input: MOON AND as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/0003:13EE:0001.0002/input/input20
hid-generic 0003:13EE:0001.0002: input,hidraw0: USB HID v1.00 Mouse [MOON AND ] on usb-0000:00:1d.0-2/input0