dmesg - compress-7zip-amd64
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.0-25-generic (buildd@lgw01-20) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #26~14.04.1-Ubuntu SMP Fri Jul 24 21:16:20 UTC 2015 (Ubuntu 3.19.0-25.26~14.04.1-generic 3.19.8-ckt2)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
tseg: 0000000000
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000077fcffff] usable
BIOS-e820: [mem 0x0000000077fd0000-0x0000000077fddfff] ACPI data
BIOS-e820: [mem 0x0000000077fde000-0x0000000077ffffff] ACPI NVS
BIOS-e820: [mem 0x00000000ff780000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.3 present.
DMI: NEC COMPUTERS INTERNATIONAL MS-7168/MS-7168, BIOS V3.07 04/18/2006
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x77fd0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FFC0000000 write-back
1 base 0040000000 mask FFE0000000 write-back
2 base 0060000000 mask FFF0000000 write-back
3 base 0070000000 mask FFF8000000 write-back
4 disabled
5 disabled
6 disabled
7 disabled
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
init_memory_mapping: [mem 0x77c00000-0x77dfffff]
[mem 0x77c00000-0x77dfffff] page 2M
BRK [0x01fd7000, 0x01fd7fff] PGTABLE
init_memory_mapping: [mem 0x60000000-0x77bfffff]
[mem 0x60000000-0x77bfffff] page 2M
init_memory_mapping: [mem 0x40000000-0x5fffffff]
[mem 0x40000000-0x5fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x3fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
init_memory_mapping: [mem 0x77e00000-0x77fcffff]
[mem 0x77e00000-0x77fcffff] page 4k
BRK [0x01fd8000, 0x01fd8fff] PGTABLE
RAMDISK: [mem 0x35a2c000-0x36d0dfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F92D0 000014 (v00 ACPIAM)
ACPI: RSDT 0x0000000077FD0000 000038 (v01 A M I OEMRSDT 04000618 MSFT 00000097)
ACPI: FACP 0x0000000077FD0200 000084 (v02 A M I OEMFACP 04000618 MSFT 00000097)
ACPI: DSDT 0x0000000077FD0430 003DD2 (v01 0AAAA 0AAAA000 00000000 INTL 02002026)
ACPI: FACS 0x0000000077FDE000 000040
ACPI: APIC 0x0000000077FD0390 00005C (v01 A M I OEMAPIC 04000618 MSFT 00000097)
ACPI: MCFG 0x0000000077FD03F0 00003C (v01 A M I OEMMCFG 04000618 MSFT 00000097)
ACPI: SSDT 0x0000000077FD4210 000D6E (v01 ATI ATIPATCH 00000001 INTL 02002026)
ACPI: OEMB 0x0000000077FDE040 000056 (v01 A M I AMI_OEM 04000618 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000077fcffff]
NODE_DATA(0) allocated [mem 0x77fcb000-0x77fcffff]
[ffffea0000000000-ffffea0001dfffff] PMD -> [ffff880075800000-ffff8800775fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0x77fcffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0x77fcffff]
Initmem setup node 0 [mem 0x00001000-0x77fcffff]
On node 0 totalpages: 491374
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 7616 pages used for memmap
DMA32 zone: 487376 pages, LIFO batch:31
SB4X0 revision 0x11
Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 2 CPUs, 1 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
e820: [mem 0x78000000-0xff77ffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880077c00000 s86144 r8192 d32640 u1048576
pcpu-alloc: s86144 r8192 d32640 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 483673
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0x12ec000000-0x12edffffff] (32MB)
Aperture beyond 4GB. Ignoring.
Memory: 1898604K/1965496K available (7918K kernel code, 1172K rwdata, 3752K rodata, 1408K init, 1292K bss, 66892K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS:16640 nr_irqs:440 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-1.
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
tsc: Fast TSC calibration failed
tsc: PIT calibration matches PMTIMER. 1 loops
tsc: Detected 1826.797 MHz processor
tsc: Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 3653.59 BogoMIPS (lpj=7307188)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
mce: CPU supports 5 MCE banks
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
ftrace: allocating 29988 entries in 118 pages
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
smpboot: CPU0: AMD Sempron(tm) Processor 3000+ (fam: 0f, model: 2f, stepping: 02)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
x86: Booted up 1 node, 1 CPUs
smpboot: Total of 1 processors activated (3653.59 BogoMIPS)
devtmpfs: initialized
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x77fde000-0x77ffffff] (139264 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 16:27:51, date: 01/22/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 0: io port [1000, ffffff]
TOM: 0000000080000000 aka 2048M
node 0 link 0: mmio [bff00000, dfeeffff]
node 0 link 0: mmio [80000000, bfefffff]
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [dfef0000, dfffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [f0000000, ffffffff]
bus: [bus 00-ff] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0x80000000-0xdfffffff]
bus: 00 [mem 0xe0000000-0xfcffffffff]
bus: 00 [mem 0x000a0000-0x000bffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff] (ignored)
PCI: root bus 00: hardware-probed resources
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfcffffffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci 0000:00:00.0: [1002:5950] type 00 class 0x060000
pci 0000:00:01.0: [1002:5a3f] type 01 class 0x060400
pci 0000:00:11.0: [1002:437a] type 00 class 0x01018f
pci 0000:00:11.0: reg 0x10: [io 0xbc00-0xbc07]
pci 0000:00:11.0: reg 0x14: [io 0xb800-0xb803]
pci 0000:00:11.0: reg 0x18: [io 0xb400-0xb407]
pci 0000:00:11.0: reg 0x1c: [io 0xb000-0xb003]
pci 0000:00:11.0: reg 0x20: [io 0xac00-0xac0f]
pci 0000:00:11.0: reg 0x24: [mem 0xff6ffc00-0xff6ffdff]
pci 0000:00:11.0: reg 0x30: [mem 0xff600000-0xff67ffff pref]
pci 0000:00:11.0: supports D1 D2
pci 0000:00:12.0: [1002:4379] type 00 class 0x01018f
pci 0000:00:12.0: reg 0x10: [io 0xa800-0xa807]
pci 0000:00:12.0: reg 0x14: [io 0xa400-0xa403]
pci 0000:00:12.0: reg 0x18: [io 0xa000-0xa007]
pci 0000:00:12.0: reg 0x1c: [io 0x9c00-0x9c03]
pci 0000:00:12.0: reg 0x20: [io 0x9800-0x980f]
pci 0000:00:12.0: reg 0x24: [mem 0xff6ff800-0xff6ff9ff]
pci 0000:00:12.0: reg 0x30: [mem 0xff580000-0xff5fffff pref]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:13.0: [1002:4374] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xff6fe000-0xff6fefff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.1: [1002:4375] type 00 class 0x0c0310
pci 0000:00:13.1: reg 0x10: [mem 0xff6fd000-0xff6fdfff]
pci 0000:00:13.1: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4373] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xff6fc000-0xff6fcfff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4372] type 00 class 0x0c0500
pci 0000:00:14.0: reg 0x10: [io 0x0b00-0x0b0f]
pci 0000:00:14.0: reg 0x14: [mem 0x00000000-0x000003ff]
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:14.1: [1002:4376] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:14.1: reg 0x14: [io 0x03f4-0x03f7]
pci 0000:00:14.1: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:14.1: reg 0x1c: [io 0x0374-0x0377]
pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:14.3: [1002:4377] type 00 class 0x060100
pci 0000:00:14.4: [1002:4371] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4370] type 00 class 0x040100
pci 0000:00:14.5: reg 0x10: [mem 0xff6ff400-0xff6ff4ff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
pci 0000:01:05.0: [1002:5954] type 00 class 0x030000
pci 0000:01:05.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
pci 0000:01:05.0: reg 0x14: [io 0x7800-0x78ff]
pci 0000:01:05.0: reg 0x18: [mem 0xff2f0000-0xff2fffff]
pci 0000:01:05.0: reg 0x30: [mem 0xff2c0000-0xff2dffff pref]
pci 0000:01:05.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:01.0: bridge window [mem 0xff200000-0xff2fffff]
pci 0000:00:01.0: bridge window [mem 0xbff00000-0xdfefffff 64bit pref]
pci 0000:02:00.0: [13f6:0111] type 00 class 0x040100
pci 0000:02:00.0: reg 0x10: [io 0x8800-0x88ff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:01.0: [1033:0035] type 00 class 0x0c0310
pci 0000:02:01.0: reg 0x10: [mem 0xff3ff000-0xff3fffff]
pci 0000:02:01.0: supports D1 D2
pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot
pci 0000:02:01.1: [1033:00e0] type 00 class 0x0c0320
pci 0000:02:01.1: reg 0x10: [mem 0xff3fec00-0xff3fecff]
pci 0000:02:01.1: supports D1 D2
pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot
pci 0000:02:03.0: [10ec:8169] type 00 class 0x020000
pci 0000:02:03.0: reg 0x10: [io 0x8400-0x84ff]
pci 0000:02:03.0: reg 0x14: [mem 0xff3fe800-0xff3fe8ff]
pci 0000:02:03.0: reg 0x30: [mem 0xff3c0000-0xff3dffff pref]
pci 0000:02:03.0: supports D1 D2
pci 0000:02:03.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x8000-0x8fff]
pci 0000:00:14.4: bridge window [mem 0xff300000-0xff3fffff]
pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x80000000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xe0000000-0xfcffffffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 5) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 7 10 11 12 14 15) *0, disabled.
vgaarb: setting as boot device: PCI:0000:01:05.0
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:05.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x77fd0000-0x77ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switched to clocksource refined-jiffies
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:01: [dma 0 disabled]
pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:02: [dma 0]
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:03: [dma 2]
pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: [io 0x040b] has been reserved
system 00:05: [io 0x04d6] has been reserved
system 00:05: [io 0x0c00-0x0c01] has been reserved
system 00:05: [io 0x0c14] has been reserved
system 00:05: [io 0x0c50-0x0c51] has been reserved
system 00:05: [io 0x0c52] has been reserved
system 00:05: [io 0x0c6c] has been reserved
system 00:05: [io 0x0c6f] has been reserved
system 00:05: [io 0x0cd4-0x0cd5] has been reserved
system 00:05: [io 0x0cd6-0x0cd7] has been reserved
system 00:05: [io 0x0cd8-0x0cdf] has been reserved
system 00:05: [io 0x0800-0x089f] could not be reserved
system 00:05: [io 0x0900-0x090f] has been reserved
system 00:05: [io 0x0910-0x091f] has been reserved
system 00:05: [mem 0xfff80000-0xffffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
system 00:08: [io 0x0e00-0x0e7f] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0b: [mem 0x00100000-0x7fffffff] could not be reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
Switched to clocksource acpi_pm
pci 0000:00:14.0: BAR 1: assigned [mem 0x80000000-0x800003ff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:01.0: bridge window [mem 0xff200000-0xff2fffff]
pci 0000:00:01.0: bridge window [mem 0xbff00000-0xdfefffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 02]
pci 0000:00:14.4: bridge window [io 0x8000-0x8fff]
pci 0000:00:14.4: bridge window [mem 0xff300000-0xff3fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x80000000-0xdfffffff]
pci_bus 0000:00: resource 6 [mem 0xe0000000-0xfcffffffff]
pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:01: resource 1 [mem 0xff200000-0xff2fffff]
pci_bus 0000:01: resource 2 [mem 0xbff00000-0xdfefffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:02: resource 1 [mem 0xff300000-0xff3fffff]
pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
pci_bus 0000:02: resource 5 [mem 0x80000000-0xdfffffff]
pci_bus 0000:02: resource 6 [mem 0xe0000000-0xfcffffffff]
pci_bus 0000:02: resource 7 [mem 0x000a0000-0x000bffff]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: MSI quirk detected; MSI disabled
pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
pci 0000:01:05.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19336K (ffff880035a2c000 - ffff880036d0e000)
microcode: AMD CPU family 0xf not supported
Scanning for low memory corruption every 60 seconds
futex hash table entries: 512 (order: 3, 32768 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1453480071.895:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010400000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: duty_cycle spans bit 4
GHES: HEST is not enabled!
00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:13.2: irq 19, io mem 0xff6fc000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.19.0-25-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:13.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-pci 0000:02:01.1: EHCI Host Controller
ehci-pci 0000:02:01.1: new USB bus registered, assigned bus number 2
ehci-pci 0000:02:01.1: irq 21, io mem 0xff3fec00
ehci-pci 0000:02:01.1: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.19.0-25-generic ehci_hcd
usb usb2: SerialNumber: 0000:02:01.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:13.0: irq 19, io mem 0xff6fe000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 3.19.0-25-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:13.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ohci-pci 0000:00:13.1: OHCI PCI host controller
ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:13.1: irq 19, io mem 0xff6fd000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.19.0-25-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:13.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
ohci-pci 0000:02:01.0: OHCI PCI host controller
ohci-pci 0000:02:01.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:02:01.0: irq 21, io mem 0xff3ff000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.19.0-25-generic ohci_hcd
usb usb5: SerialNumber: 0000:02:01.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, 114 bytes nvram
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
ACPI PCC probe failed.
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 6aaa11d18c2d3a40b1b4dbe5bf8ad656ddf51838'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 0:246:490
rtc_cmos 00:00: setting system clock to 2016-01-22 16:27:52 UTC (1453480072)
powernow_k8: fid 0xa (1800 MHz), vid 0x6
powernow_k8: fid 0x2 (1000 MHz), vid 0x12
powernow_k8: Found 1 AMD Sempron(tm) Processor 3000+ (1 cpu cores) (version 2.20.00)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000)
Freeing unused kernel memory: 344K (ffff880001baa000 - ffff880001c00000)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
systemd-udevd[95]: starting version 204
usb 2-1: new high-speed USB device number 2 using ehci-pci
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
sata_sil 0000:00:11.0: version 2.4
scsi host0: sata_sil
scsi host1: sata_sil
ata1: SATA max UDMA/100 mmio m512@0xff6ffc00 tf 0xff6ffc80 irq 23
ata2: SATA max UDMA/100 mmio m512@0xff6ffc00 tf 0xff6ffcc0 irq 23
scsi host2: sata_sil
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:03.0 (unnamed net_device) (uninitialized): not PCI Express
r8169 0000:02:03.0 eth0: RTL8169sb/8110sb at 0xffffc90000372800, 00:16:17:5a:40:77, XID 10000000 IRQ 20
r8169 0000:02:03.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
scsi host3: sata_sil
ata3: SATA max UDMA/100 mmio m512@0xff6ff800 tf 0xff6ff880 irq 22
ata4: SATA max UDMA/100 mmio m512@0xff6ff800 tf 0xff6ff8c0 irq 22
scsi host4: pata_atiixp
scsi host5: pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
usb 2-1: New USB device found, idVendor=13fe, idProduct=3600
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: USB DISK 2.0
usb 2-1: Manufacturer:
usb 2-1: SerialNumber: 07A11B027B6C5940
ata5.00: ATA-7: SAMSUNG SP0802N, TK100-30, max UDMA/100
ata5.00: 156368016 sectors, multi 16: LBA48
ata6.01: HPA detected: current 19930079, native 19932192
ata6.01: ATA-6: SAMSUNG SV1021H, QE100-02, max UDMA/100
ata6.01: 19930079 sectors, multi 16: LBA
ata6.01: limited to UDMA/33 due to 40-wire cable
ata5.00: configured for UDMA/100
ata6.01: configured for UDMA/33
usb-storage 2-1:1.0: USB Mass Storage device detected
usb-storage 2-1:1.0: Quirks match for vid 13fe pid 3600: 4000
scsi host6: usb-storage 2-1:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
ata1: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
scsi 4:0:0:0: Direct-Access ATA SAMSUNG SP0802N 0-30 PQ: 0 ANSI: 5
sd 4:0:0:0: [sda] 156368016 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: Attached scsi generic sg0 type 0
scsi 5:0:1:0: Direct-Access ATA SAMSUNG SV1021H 0-02 PQ: 0 ANSI: 5
sd 5:0:1:0: Attached scsi generic sg1 type 0
sd 5:0:1:0: [sdb] 19930079 512-byte logical blocks: (10.2 GB/9.50 GiB)
sd 5:0:1:0: [sdb] Write Protect is off
sd 5:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 < sdb5 >
sd 5:0:1:0: [sdb] Attached SCSI disk
sda: sda1 sda2 < sda5 > sda3
sd 4:0:0:0: [sda] Attached SCSI disk
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
random: nonblocking pool is initialized
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
init: plymouth-upstart-bridge main process (166) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (178) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (180) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (183) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
Adding 784380k swap on /dev/sda5. Priority:-1 extents:1 across:784380k FS
systemd-udevd[285]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:04: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
lp0: using parport0 (interrupt-driven).
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[drm] Initialized drm 1.1.0 20060810
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC enabled.
EDAC amd64: K8 revE or earlier detected (node 0).
EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT)
EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[drm] radeon kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (c0000000 300000) vs hw (c0000000 10000000)
fb: switching to radeondrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (RS480 0x1002:0x5954 0x1631:0xD008).
[drm] register mmio base: 0xFF2F0000
[drm] register mmio size: 65536
[drm] Generation 2 PCI interface, using max accessible memory
radeon 0000:01:05.0: VRAM: 128M 0x0000000078000000 - 0x000000007FFFFFFF (128M used)
radeon 0000:01:05.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[drm] Detected VRAM RAM=128M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 959976 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 128M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] radeon: 3 quad pipes, 1 z pipes initialized.
[drm] PCIE GART of 512M enabled (table at 0x0000000071D80000).
radeon 0000:01:05.0: WB enabled
radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x0000000080000000 and cpu addr 0xffff880071674000
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:05.0: radeon: MSI limited to 32-bit
[drm] radeon: irq initialized.
[drm] Loading R300 Microcode
audit: type=1400 audit(1453480089.445:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=359 comm="apparmor_parser"
audit: type=1400 audit(1453480089.445:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=359 comm="apparmor_parser"
audit: type=1400 audit(1453480089.445:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=359 comm="apparmor_parser"
audit: type=1400 audit(1453480089.445:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=359 comm="apparmor_parser"
audit: type=1400 audit(1453480089.445:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=359 comm="apparmor_parser"
audit: type=1400 audit(1453480089.449:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=359 comm="apparmor_parser"
audit: type=1400 audit(1453480089.457:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=398 comm="apparmor_parser"
[drm] radeon: ring at 0x0000000080001000
[drm] ring test succeeded in 2 usecs
[drm] ib test succeeded in 0 usecs
snd_cmipci 0000:02:00.0: no OPL device at 0x388, skipping...
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC2
[drm] Connector 1:
[drm] SVIDEO-1
[drm] Encoders:
[drm] TV1: INTERNAL_DAC2
[drm] fb mappable at 0xC0040000
[drm] vram apper at 0xC0000000
[drm] size 3145728
[drm] fb depth is 24
[drm] pitch is 4096
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:05.0: registered panic notifier
[drm] Initialized radeon 2.40.0 20080528 for 0000:01:05.0 on minor 0
EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
init: failsafe main process (578) killed by TERM signal
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
audit: type=1400 audit(1453480093.429:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=743 comm="apparmor_parser"
audit: type=1400 audit(1453480093.429:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=743 comm="apparmor_parser"
audit: type=1400 audit(1453480093.429:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=743 comm="apparmor_parser"
usb 2-1: reset high-speed USB device number 2 using ehci-pci
r8169 0000:02:03.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:02:03.0 eth0: link down
audit: type=1400 audit(1453480096.277:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=863 comm="apparmor_parser"
audit: type=1400 audit(1453480096.277:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=863 comm="apparmor_parser"
audit: type=1400 audit(1453480096.277:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=863 comm="apparmor_parser"
audit: type=1400 audit(1453480096.285:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=864 comm="apparmor_parser"
audit: type=1400 audit(1453480096.285:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=864 comm="apparmor_parser"
audit: type=1400 audit(1453480096.285:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=864 comm="apparmor_parser"
audit: type=1400 audit(1453480096.285:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=864 comm="apparmor_parser"
audit: type=1400 audit(1453480096.285:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=864 comm="apparmor_parser"
audit: type=1400 audit(1453480096.285:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=864 comm="apparmor_parser"
audit: type=1400 audit(1453480096.309:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=865 comm="apparmor_parser"
r8169 0000:02:03.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process ended, respawning
usb 2-1: device descriptor read/64, error -110
usb 2-1: device descriptor read/64, error -110
usb 2-1: reset high-speed USB device number 2 using ehci-pci
usb 2-1: device descriptor read/64, error -110
usb 2-1: device descriptor read/64, error -110
usb 2-1: reset high-speed USB device number 2 using ehci-pci
usb 2-1: device not accepting address 2, error -110
usb 2-1: reset high-speed USB device number 2 using ehci-pci
usb 2-1: device not accepting address 2, error -110
usb 2-1: USB disconnect, device number 2
usb 2-1: new high-speed USB device number 3 using ehci-pci
usb 2-1: device descriptor read/64, error -110
usb 2-1: device descriptor read/64, error -110
usb 2-1: new high-speed USB device number 4 using ehci-pci
usb 2-1: device descriptor read/64, error -110
usb 2-1: device descriptor read/64, error -110
usb 2-1: new high-speed USB device number 5 using ehci-pci
usb 2-1: device not accepting address 5, error -110
usb 2-1: new high-speed USB device number 6 using ehci-pci
usb 2-1: device not accepting address 6, error -110
usb usb2-port1: unable to enumerate USB device
usb 5-1: new full-speed USB device number 2 using ohci-pci
usb 5-1: not running at top speed; connect to a high speed hub
usb 5-1: New USB device found, idVendor=13fe, idProduct=3600
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1: Product: USB DISK 2.0
usb 5-1: Manufacturer:
usb 5-1: SerialNumber: 07A11B027B6C5940
usb-storage 5-1:1.0: USB Mass Storage device detected
usb-storage 5-1:1.0: Quirks match for vid 13fe pid 3600: 4000
scsi host7: usb-storage 5-1:1.0
scsi 7:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 0 CCS
sd 7:0:0:0: Attached scsi generic sg2 type 0
sd 7:0:0:0: [sdc] Attached SCSI removable disk