dmesg - SoftlayerSharedServer
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt20-1+deb8u1 (2015-12-14)
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000efffffff] usable
BIOS-e820: [mem 0x00000000fc000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000010fbfffff] usable
Notice: NX (Execute Disable) protection missing in CPU!
SMBIOS 2.4 present.
DMI: Xen HVM domU, BIOS 4.1.5 11/28/2013
Hypervisor detected: Xen HVM
Xen version 4.1.
Xen Platform PCI: I/O protocol version 1
Netfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated NICs.
Blkfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated disks.
You might have to change the root device
from /dev/hd[a-d] to /dev/xvd[a-d]
in your root= kernel command line option
HVMOP_pagetable_dying not supported
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x10fc00 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-combining
C0000-FFFFF write-back
MTRR variable ranges enabled:
0 base 0000F0000000 mask 3FFFF8000000 uncachable
1 base 0000F8000000 mask 3FFFFC000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xf0000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fb730-0x000fb73f] mapped at [ffff8800000fb730]
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01af5000, 0x01af5fff] PGTABLE
BRK [0x01af6000, 0x01af6fff] PGTABLE
BRK [0x01af7000, 0x01af7fff] PGTABLE
init_memory_mapping: [mem 0x10fa00000-0x10fbfffff]
[mem 0x10fa00000-0x10fbfffff] page 2M
BRK [0x01af8000, 0x01af8fff] PGTABLE
init_memory_mapping: [mem 0x10c000000-0x10f9fffff]
[mem 0x10c000000-0x10f9fffff] page 2M
init_memory_mapping: [mem 0x100000000-0x10bffffff]
[mem 0x100000000-0x10bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xefffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xefffffff] page 2M
RAMDISK: [mem 0x363fc000-0x371f5fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000EA020 000024 (v02 Xen )
ACPI: XSDT 0x00000000FC00EF80 000044 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: FACP 0x00000000FC00ED40 0000F4 (v04 Xen HVM 00000000 HVML 00000000)
ACPI: DSDT 0x00000000FC003040 00BC75 (v02 Xen HVM 00000000 INTL 20090123)
ACPI: FACS 0x00000000FC003000 000040
ACPI: FACS 0x00000000FC003000 000040
ACPI: APIC 0x00000000FC00EE40 0000D8 (v02 Xen HVM 00000000 HVML 00000000)
ACPI: HPET 0x00000000FC00EF20 000038 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: WAET 0x00000000FC00EF58 000028 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000010fbfffff]
Initmem setup node 0 [mem 0x00000000-0x10fbfffff]
NODE_DATA [mem 0x10fbf8000-0x10fbfcfff]
[ffffea0000000000-ffffea0003bfffff] PMD -> [ffff88010b200000-ffff88010ebfffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x10fbfffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0xefffffff]
node 0: [mem 0x100000000-0x10fbfffff]
On node 0 totalpages: 1047453
DMA zone: 56 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 13384 pages used for memmap
DMA32 zone: 978944 pages, LIFO batch:31
Normal zone: 882 pages used for memmap
Normal zone: 64512 pages, LIFO batch:15
ACPI: PM-Timer IO Port: 0x1f48
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x16] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x18] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x1a] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x1c] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 15 CPUs, 13 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xffffffff]
e820: [mem 0xf0000000-0xfbffffff] available for PCI devices
Booting paravirtualized kernel on Xen HVM
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:15 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88010f800000 s80896 r8192 d21504 u131072
pcpu-alloc: s80896 r8192 d21504 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 --
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1033110
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 4036828K/4189812K available (5219K kernel code, 947K rwdata, 1836K rodata, 1204K init, 840K bss, 152984K reserved)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=15.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=15
NR_IRQS:33024 nr_irqs:1208 16
xen:events: Using 2-level ABI
xen:events: Xen HVM callback vector for event delivery is enabled
Console: colour VGA+ 80x25
console [tty0] enabled
Cannot get hvm parameter CONSOLE_EVTCHN (18): -22!
hpet clockevent registered
tsc: Detected 2000.020 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.04 BogoMIPS (lpj=8000080)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
mce: CPU supports 0 MCE banks
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
ftrace: allocating 21679 entries in 85 pages
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2683 v3 @ 2.00GHz (fam: 06, model: 3f, stepping: 02)
Xen: using vcpuop timer interface
installing Xen timer for CPU 0
Performance Events: unsupported p6 CPU model 63 no PMU driver, software events only.
installing Xen timer for CPU 1
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: disabled (cpu0): hardware events not enabled
mce: CPU supports 0 MCE banks
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (8052.74 BogoMIPS)
devtmpfs: initialized
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
acpiphp: Slot [0] registered
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
acpiphp: Slot [9] registered
acpiphp: Slot [10] registered
acpiphp: Slot [11] registered
acpiphp: Slot [12] registered
acpiphp: Slot [13] registered
acpiphp: Slot [14] registered
acpiphp: Slot [15] registered
acpiphp: Slot [16] registered
acpiphp: Slot [17] registered
acpiphp: Slot [18] registered
acpiphp: Slot [19] registered
acpiphp: Slot [20] registered
acpiphp: Slot [21] registered
acpiphp: Slot [22] registered
acpiphp: Slot [23] registered
acpiphp: Slot [24] registered
acpiphp: Slot [25] registered
acpiphp: Slot [26] registered
acpiphp: Slot [27] registered
acpiphp: Slot [28] registered
acpiphp: Slot [29] registered
acpiphp: Slot [30] registered
acpiphp: Slot [31] registered
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfbffffff]
pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
pci 0000:00:01.1: reg 0x20: [io 0xc320-0xc32f]
pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300
pci 0000:00:01.2: reg 0x20: [io 0xc300-0xc31f]
pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
pci 0000:00:01.3: quirk: [io 0x1f40-0x1f7f] claimed by PIIX4 ACPI
pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf1ffffff pref]
pci 0000:00:02.0: reg 0x14: [mem 0xf3000000-0xf3000fff]
pci 0000:00:03.0: [5853:0001] type 00 class 0x010000
pci 0000:00:03.0: reg 0x10: [io 0xc000-0xc0ff]
pci 0000:00:03.0: reg 0x14: [mem 0xf2000000-0xf2ffffff pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
ACPI: Enabled 2 GPEs in block 00 to 1F
xen:balloon: Initialising balloon driver
xen_balloon: Initialising balloon driver
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
init_memory_mapping: [mem 0x110000000-0x117ffffff]
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x10fc00000-0x10fffffff]
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 62.500000 MHz counter
[mem 0x110000000-0x117ffffff] page 2M
Switched to clocksource xen
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x10c0-0x1141] has been reserved
system 00:01: [io 0xb044-0xb047] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x08a0-0x08a3] has been reserved
system 00:02: [io 0x0cc0-0x0ccf] has been reserved
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
xen: --> pirq=16 -> irq=8 (gsi=8)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
xen: --> pirq=17 -> irq=12 (gsi=12)
pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
xen: --> pirq=18 -> irq=1 (gsi=1)
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
xen: --> pirq=19 -> irq=6 (gsi=6)
pnp 00:06: [dma 2]
pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
xen: --> pirq=20 -> irq=4 (gsi=4)
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
xen: --> pirq=21 -> irq=7 (gsi=7)
pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
pnp: PnP ACPI: found 9 devices
ACPI: bus type PNP unregistered
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xf0000000-0xfbffffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
xen: --> pirq=22 -> irq=23 (gsi=23)
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 14312K (ffff8800363fc000 - ffff8800371f6000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xec000000-0xf0000000] (64MB) mapped at [ffff8800ec000000-ffff8800efffffff]
microcode: CPU0 sig=0x306f2, pf=0x1, revision=0x2d
microcode: CPU1 sig=0x306f2, pf=0x1, revision=0x2d
microcode: Microcode Update Driver: v2.00 , Peter Oruba
futex hash table entries: 4096 (order: 6, 262144 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1453325993.006:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7912
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered (default)
io scheduler deadline registered
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 63
GHES: HEST is not enabled!
xen: --> pirq=23 -> irq=30 (gsi=30)
xen:grant_table: Grant tables using version 1 layout
Grant table initialized
Cannot get hvm parameter CONSOLE_EVTCHN (18): -22!
00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one day, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
registered taskstats version 1
xenbus_probe_frontend: Device with no driver: device/vbd/768
xenbus_probe_frontend: Device with no driver: device/vbd/832
xenbus_probe_frontend: Device with no driver: device/vif/0
xenbus_probe_frontend: Device with no driver: device/vif/1
rtc_cmos 00:03: setting system clock to 2016-01-20 21:39:52 UTC (1453325992)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 912K (ffff88000151c000 - ffff880001600000)
Freeing unused kernel memory: 212K (ffff8800017cb000 - ffff880001800000)
systemd-udevd[63]: starting version 215
random: systemd-udevd urandom read with 13 bits of entropy available
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:01.2: UHCI Host Controller
uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:01.2: detected 2 ports
uhci_hcd 0000:00:01.2: irq 23, io base 0x0000c300
libata version 3.00 loaded.
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
usb usb1: SerialNumber: 0000:00:01.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ata_piix 0000:00:01.1: version 2.13
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc320 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc328 irq 15
FDC 0 is a S82078B
xen_netfront: Initialising Xen virtual ethernet driver
blkfront: xvda: barrier: enabled; persistent grants: disabled; indirect descriptors: disabled;
xvda: xvda1 xvda2
blkfront: xvdb: barrier: enabled; persistent grants: disabled; indirect descriptors: disabled;
xvdb: xvdb1
Setting capacity to 4194304
xvdb: detected capacity change from 0 to 2147483648
PM: Starting manual resume from disk
PM: Hibernation image partition 202:17 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (xvda2): mounting ext3 file system using the ext4 subsystem
EXT4-fs (xvda2): mounted filesystem with ordered data mode. Opts: (null)
usb 1-2: new full-speed USB device number 2 using uhci_hcd
systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
systemd[1]: Detected virtualization 'xen'.
systemd[1]: Detected architecture 'x86-64'.
systemd[1]: Inserted module 'autofs4'
systemd[1]: Set hostname to .
systemd[1]: [/run/systemd/generator.late/nimbus.service:7] Failed to add dependency on +splash_late.service, ignoring: Invalid argument
systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Remote File Systems (Pre).
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Starting Paths.
systemd[1]: Reached target Paths.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Expecting device dev-disk-by\x2dlabel-SWAP\x2dxvdb1.device...
systemd[1]: Starting Root Slice.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting User and Session Slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting System Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Started File System Check on Root Device.
systemd[1]: Starting system-systemd\x2dfsck.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting system-getty.slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Mounting POSIX Message Queue File System...
usb 1-2: New USB device found, idVendor=0627, idProduct=0001
usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb 1-2: Product: QEMU USB Tablet
usb 1-2: Manufacturer: QEMU 0.10.2
usb 1-2: SerialNumber: 1
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Slices.
systemd[1]: Reached target Slices.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Load Kernel Modules.
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted Configuration File System.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Starting Syslog Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd-udevd[154]: starting version 215
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input3
ACPI: Sleep Button [SLPF]
input: PC Speaker as /devices/platform/pcspkr/input/input4
piix4_smbus 0000:00:01.3: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
[drm] Initialized drm 1.1.0 20060810
hidraw: raw HID events driver (C) Jiri Kosina
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
SSE version of gcm_enc/dec engaged.
random: nonblocking pool is initialized
ppdev: user-space parallel port driver
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
input: QEMU 0.10.2 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-2/1-2:1.0/0003:0627:0001.0001/input/input6
hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 0.10.2 QEMU USB Tablet] on usb-0000:00:01.2-2/input0
alg: No test for crc32 (crc32-pclmul)
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain dram
tsc: Refined TSC clocksource calibration: 1999.999 MHz
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain dram
EXT4-fs (xvda2): re-mounted. Opts: errors=remount-ro
Adding 2096444k swap on /dev/xvdb1. Priority:-1 extents:1 across:2096444k SSFS
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
EXT4-fs (xvda1): mounting ext3 file system using the ext4 subsystem
EXT4-fs (xvda1): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[152]: Received request to flush runtime journal from PID 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
ntfs: driver 2.1.30 [Flags: R/W MODULE].
QNX4 filesystem 0.2.3 registered.
raid6: sse2x1 5543 MB/s
raid6: sse2x2 6875 MB/s
raid6: sse2x4 7741 MB/s
raid6: using algorithm sse2x4 (7741 MB/s)
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 2610.000 MB/sec
generic_sse: 2560.000 MB/sec
xor: using function: prefetch64-sse (2610.000 MB/sec)
Btrfs loaded
fuse init (API version 7.23)