dmesg - compilation
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.2.0-23-generic (buildd@lcy01-30) (gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu2) ) #28-Ubuntu SMP Sun Dec 27 17:47:31 UTC 2015 (Ubuntu 4.2.0-23.28-generic 4.2.6)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
tseg: 006f000000
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000006ccc5fff] usable
BIOS-e820: [mem 0x000000006ccc6000-0x000000006ccf5fff] reserved
BIOS-e820: [mem 0x000000006ccf6000-0x000000006cfb8fff] usable
BIOS-e820: [mem 0x000000006cfb9000-0x000000006d086fff] ACPI NVS
BIOS-e820: [mem 0x000000006d087000-0x000000006e1bcfff] reserved
BIOS-e820: [mem 0x000000006e1bd000-0x000000006e1bdfff] usable
BIOS-e820: [mem 0x000000006e1be000-0x000000006e3c3fff] ACPI NVS
BIOS-e820: [mem 0x000000006e3c4000-0x000000006e84efff] usable
BIOS-e820: [mem 0x000000006e84f000-0x000000006efdffff] reserved
BIOS-e820: [mem 0x000000006efe0000-0x000000006effffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000024effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A88XN-WIFI, BIOS F4 05/28/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x24f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000070000000 mask FFFFF0000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000024f000000 aka 9456M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 1792MB, range: 256MB, type UC
total RAM covered: 1792M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 512M num_reg: 2 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 1792MB, range: 256MB, type UC
e820: update [mem 0x70000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x6f000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd6f0-0x000fd6ff] mapped at [ffff8800000fd6f0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01ff0000, 0x01ff0fff] PGTABLE
BRK [0x01ff1000, 0x01ff1fff] PGTABLE
BRK [0x01ff2000, 0x01ff2fff] PGTABLE
init_memory_mapping: [mem 0x24ee00000-0x24effffff]
[mem 0x24ee00000-0x24effffff] page 2M
BRK [0x01ff3000, 0x01ff3fff] PGTABLE
init_memory_mapping: [mem 0x240000000-0x24edfffff]
[mem 0x240000000-0x24edfffff] page 2M
init_memory_mapping: [mem 0x220000000-0x23fffffff]
[mem 0x220000000-0x23fffffff] page 1G
init_memory_mapping: [mem 0x00100000-0x6ccc5fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x6cbfffff] page 2M
[mem 0x6cc00000-0x6ccc5fff] page 4k
init_memory_mapping: [mem 0x6ccf6000-0x6cfb8fff]
[mem 0x6ccf6000-0x6cfb8fff] page 4k
BRK [0x01ff4000, 0x01ff4fff] PGTABLE
init_memory_mapping: [mem 0x6e1bd000-0x6e1bdfff]
[mem 0x6e1bd000-0x6e1bdfff] page 4k
BRK [0x01ff5000, 0x01ff5fff] PGTABLE
init_memory_mapping: [mem 0x6e3c4000-0x6e84efff]
[mem 0x6e3c4000-0x6e3fffff] page 4k
[mem 0x6e400000-0x6e7fffff] page 2M
[mem 0x6e800000-0x6e84efff] page 4k
init_memory_mapping: [mem 0x6efe0000-0x6effffff]
[mem 0x6efe0000-0x6effffff] page 4k
init_memory_mapping: [mem 0x100000000-0x21fffffff]
[mem 0x100000000-0x21fffffff] page 1G
RAMDISK: [mem 0x33fe4000-0x35fe9fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x000000006D03D080 000084 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000006D042F48 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150619/tbfadt-654)
ACPI: DSDT 0x000000006D03D1A0 005DA8 (v02 ALASKA A M I 00000088 INTL 20051117)
ACPI: FACS 0x000000006D07C080 000040
ACPI: APIC 0x000000006D043058 00007E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000006D0430D8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000006D043120 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x000000006D043160 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: WDRT 0x000000006D043198 000047 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 0x000000006D0431E0 000B9C (v01 AMD BANTRY 00000001 AMD 00000001)
ACPI: SSDT 0x000000006D043D80 00033B (v02 AMD BANTRY 00000002 MSFT 04000000)
ACPI: CRAT 0x000000006D0440C0 000550 (v01 AMD BANTRY 00000001 AMD 00000001)
ACPI: SSDT 0x000000006D044610 001457 (v01 AMD CPMDFIGP 00000001 INTL 20051117)
ACPI: SSDT 0x000000006D045A68 000852 (v01 AMD CPMDFDGP 00000001 INTL 20051117)
ACPI: SSDT 0x000000006D0462C0 00122C (v01 AMD CPMCMN 00000001 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000024effffff]
NODE_DATA(0) allocated [mem 0x24eff6000-0x24effafff]
[ffffea0000000000-ffffea00093fffff] PMD -> [ffff880247600000-ffff88024e5fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000024effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x000000006ccc5fff]
node 0: [mem 0x000000006ccf6000-0x000000006cfb8fff]
node 0: [mem 0x000000006e1bd000-0x000000006e1bdfff]
node 0: [mem 0x000000006e3c4000-0x000000006e84efff]
node 0: [mem 0x000000006efe0000-0x000000006effffff]
node 0: [mem 0x0000000100000000-0x000000024effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000024effffff]
On node 0 totalpages: 1819602
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 6929 pages used for memmap
DMA32 zone: 443445 pages, LIFO batch:31
Normal zone: 21440 pages used for memmap
Normal zone: 1372160 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 1, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x6ccc6000-0x6ccf5fff]
PM: Registered nosave memory: [mem 0x6cfb9000-0x6d086fff]
PM: Registered nosave memory: [mem 0x6d087000-0x6e1bcfff]
PM: Registered nosave memory: [mem 0x6e1be000-0x6e3c3fff]
PM: Registered nosave memory: [mem 0x6e84f000-0x6efdffff]
PM: Registered nosave memory: [mem 0x6f000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x6f000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88024ec00000 s96728 r8192 d30248 u524288
pcpu-alloc: s96728 r8192 d30248 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1791148
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7047628K/7278408K available (8148K kernel code, 1237K rwdata, 3800K rodata, 1460K init, 1292K bss, 230780K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:1000 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3493.946 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6987.89 BogoMIPS (lpj=13975784)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff81ea4000 - ffffffff81eab000)
ftrace: allocating 30910 entries in 121 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A10-7700K Radeon R7, 10 Compute Cores 4C+6G (fam: 15, model: 30, stepping: 01)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (27951.56 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x6cfb9000-0x6d086fff] (843776 bytes)
PM: Registering ACPI NVS region [mem 0x6e1be000-0x6e3c3fff] (2121728 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 21:02:56, date: 01/12/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xb0000000-0xffffffff window]
pci 0000:00:00.0: [1022:1422] type 00 class 0x060000
pci 0000:00:01.0: [1002:1313] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:01.0: reg 0x18: [mem 0xd0800000-0xd0ffffff 64bit pref]
pci 0000:00:01.0: reg 0x20: [io 0xf000-0xf0ff]
pci 0000:00:01.0: reg 0x24: [mem 0xfeb00000-0xfeb3ffff]
pci 0000:00:01.0: reg 0x30: [mem 0xfeb40000-0xfeb5ffff pref]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.0: PME# supported from D1 D2 D3hot
pci 0000:00:01.1: [1002:1308] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xfeb64000-0xfeb67fff 64bit]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:02.0: [1022:1424] type 00 class 0x060000
pci 0000:00:02.1: [1022:1425] type 01 class 0x060400
pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [1022:1424] type 00 class 0x060000
pci 0000:00:03.1: [1022:1426] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.1: System wakeup disabled by ACPI
pci 0000:00:04.0: [1022:1424] type 00 class 0x060000
pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xfeb6a000-0xfeb6bfff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:10.1: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.1: reg 0x10: [mem 0xfeb68000-0xfeb69fff 64bit]
pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
pci 0000:00:10.1: System wakeup disabled by ACPI
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf190-0xf197]
pci 0000:00:11.0: reg 0x14: [io 0xf180-0xf183]
pci 0000:00:11.0: reg 0x18: [io 0xf170-0xf177]
pci 0000:00:11.0: reg 0x1c: [io 0xf160-0xf163]
pci 0000:00:11.0: reg 0x20: [io 0xf150-0xf15f]
pci 0000:00:11.0: reg 0x24: [mem 0xfeb71000-0xfeb717ff]
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfeb70000-0xfeb70fff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfeb6f000-0xfeb6f0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfeb6e000-0xfeb6efff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfeb6d000-0xfeb6d0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.1: [1022:780c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0xf140-0xf147]
pci 0000:00:14.1: reg 0x14: [io 0xf130-0xf133]
pci 0000:00:14.1: reg 0x18: [io 0xf120-0xf127]
pci 0000:00:14.1: reg 0x1c: [io 0xf110-0xf113]
pci 0000:00:14.1: reg 0x20: [io 0xf100-0xf10f]
pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfeb60000-0xfeb63fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfeb6c000-0xfeb6cfff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: PME# supported from D0 D3hot D3cold
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:141a] type 00 class 0x060000
pci 0000:00:18.1: [1022:141b] type 00 class 0x060000
pci 0000:00:18.2: [1022:141c] type 00 class 0x060000
pci 0000:00:18.3: [1022:141d] type 00 class 0x060000
pci 0000:00:18.4: [1022:141e] type 00 class 0x060000
pci 0000:00:18.5: [1022:141f] type 00 class 0x060000
pci 0000:01:00.0: [1002:6658] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x24: [mem 0xfea00000-0xfea3ffff]
pci 0000:01:00.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.1: [1002:aac0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.1: PCI bridge to [bus 01]
pci 0000:00:02.1: bridge window [io 0xe000-0xefff]
pci 0000:00:02.1: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.1: bridge window [mem 0xc0000000-0xd07fffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xfe900000-0xfe900fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xd1000000-0xd1003fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.1: PCI bridge to [bus 02]
pci 0000:00:03.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:03.1: bridge window [mem 0xd1000000-0xd10fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xb0000000-0xffffffff window] (subtractive decode)
pci 0000:04:00.0: [8086:08b1] type 00 class 0x028000
pci 0000:04:00.0: reg 0x10: [mem 0xfe800000-0xfe801fff 64bit]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:15.0: PCI bridge to [bus 04]
pci 0000:00:15.0: bridge window [mem 0xfe800000-0xfe8fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=mem,locks=none
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
vgaarb: no bridge control possible 0000:00:01.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0x6ccc6000-0x6fffffff]
e820: reserve RAM buffer [mem 0x6cfb9000-0x6fffffff]
e820: reserve RAM buffer [mem 0x6e1be000-0x6fffffff]
e820: reserve RAM buffer [mem 0x6e84f000-0x6fffffff]
e820: reserve RAM buffer [mem 0x6f000000-0x6fffffff]
e820: reserve RAM buffer [mem 0x24f000000-0x24fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0x70000000-0xafffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0220-0x0227] has been reserved
system 00:03: [io 0x0228-0x0237] has been reserved
system 00:03: [io 0x0a20-0x0a2f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x040b] has been reserved
system 00:07: [io 0x04d6] has been reserved
system 00:07: [io 0x0c00-0x0c01] has been reserved
system 00:07: [io 0x0c14] has been reserved
system 00:07: [io 0x0c50-0x0c51] has been reserved
system 00:07: [io 0x0c52] has been reserved
system 00:07: [io 0x0c6c] has been reserved
system 00:07: [io 0x0c6f] has been reserved
system 00:07: [io 0x0cd0-0x0cd1] has been reserved
system 00:07: [io 0x0cd2-0x0cd3] has been reserved
system 00:07: [io 0x0cd4-0x0cd5] has been reserved
system 00:07: [io 0x0cd6-0x0cd7] has been reserved
system 00:07: [io 0x0cd8-0x0cdf] has been reserved
system 00:07: [io 0x0800-0x089f] could not be reserved
system 00:07: [io 0x0b20-0x0b3f] has been reserved
system 00:07: [io 0x0900-0x090f] has been reserved
system 00:07: [io 0x0910-0x091f] has been reserved
system 00:07: [io 0xfe00-0xfefe] has been reserved
system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:07: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:07: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:07: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:07: [mem 0xfed00000-0xfed00fff] could not be reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:02.1: PCI bridge to [bus 01]
pci 0000:00:02.1: bridge window [io 0xe000-0xefff]
pci 0000:00:02.1: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.1: bridge window [mem 0xc0000000-0xd07fffff 64bit pref]
pci 0000:00:03.1: PCI bridge to [bus 02]
pci 0000:00:03.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:03.1: bridge window [mem 0xd1000000-0xd10fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03]
pci 0000:00:15.0: PCI bridge to [bus 04]
pci 0000:00:15.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xb0000000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd07fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:02: resource 2 [mem 0xd1000000-0xd10fffff 64bit pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:03: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:03: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:03: resource 10 [mem 0xb0000000-0xffffffff window]
pci_bus 0000:04: resource 1 [mem 0xfe800000-0xfe8fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 32792K (ffff880033fe4000 - ffff880035fea000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x68cc6000-0x6ccc6000] (64MB) mapped at [ffff880068cc6000-ffff88006ccc5fff]
perf: AMD NB counters detected
microcode: CPU0: patch_level=0x06003104
microcode: CPU1: patch_level=0x06003104
microcode: CPU2: patch_level=0x06003104
microcode: CPU3: patch_level=0x06003104
microcode: Microcode Update Driver: v2.00 , Peter Oruba
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000001ff)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1452632576.828:1): initialized
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.1: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.1: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90001000000, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
QUIRK: Enable AMD PLL fix
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.2.0-23-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:10.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.2.0-23-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:10.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:10.1: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.2.0-23-generic xhci-hcd
usb usb3: SerialNumber: 0000:00:10.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.2.0-23-generic xhci-hcd
usb usb4: SerialNumber: 0000:00:10.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 5
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb6f000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 4.2.0-23-generic ehci_hcd
usb usb5: SerialNumber: 0000:00:12.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 6
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb6d000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: EHCI Host Controller
usb usb6: Manufacturer: Linux 4.2.0-23-generic ehci_hcd
usb usb6: SerialNumber: 0000:00:13.2
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 5 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb70000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 4.2.0-23-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:12.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 8
ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb6e000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: OHCI PCI host controller
usb usb8: Manufacturer: Linux 4.2.0-23-generic ohci_hcd
usb usb8: SerialNumber: 0000:00:13.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 9
ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb6c000
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: OHCI PCI host controller
usb usb9: Manufacturer: Linux 4.2.0-23-generic ohci_hcd
usb usb9: SerialNumber: 0000:00:14.5
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 5b77c7b2b6447c14c514ab2aee8004bfbd7c3913'
registered taskstats version 1
zswap: loading zswap
zswap: using zbud pool
zswap: using lzo compressor
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 0:61:45
rtc_cmos 00:05: setting system clock to 2016-01-12 21:02:57 UTC (1452632577)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1460K (ffffffff81d37000 - ffffffff81ea4000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 32K (ffff8800017f8000 - ffff880001800000)
Freeing unused kernel memory: 296K (ffff880001bb6000 - ffff880001c00000)
random: systemd-udevd urandom read with 4 bits of entropy available
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
acpi device:02: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input3
ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
acpi device:04: registered as cooling_device5
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:03/LNXVIDEO:01/input/input4
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c6c000, 74:d4:35:10:f9:f0, XID 0c900800 IRQ 38
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[drm] Initialized drm 1.1.0 20060810
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71100 irq 39
ata2: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71180 irq 39
ata3: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71200 irq 39
ata4: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71280 irq 39
scsi host4: pata_atiixp
scsi host5: pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15
[drm] radeon kernel modesetting enabled.
VGA switcheroo: detected switching method \_SB_.PCI0.VGA_.ATPX handle
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
Found CRAT image with size=1360
Parsing CRAT table with 1 nodes
Found CU entry in CRAT table with proximity_domain=0 caps=0
CU CPU: cores=4 id_base=16
Found CU entry in CRAT table with proximity_domain=0 caps=0
CU GPU: simds=32 id_base=-2147483648
Found memory entry in CRAT table with proximity_domain=0
Found memory entry in CRAT table with proximity_domain=0
Found cache entry in CRAT table with processor_id=16
Found cache entry in CRAT table with processor_id=16
Found cache entry in CRAT table with processor_id=16
Found cache entry in CRAT table with processor_id=17
Found cache entry in CRAT table with processor_id=18
Found cache entry in CRAT table with processor_id=18
Found cache entry in CRAT table with processor_id=18
Found cache entry in CRAT table with processor_id=19
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Creating topology SYSFS entries
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (c0000000 7f0000) vs hw (b0000000 10000000)
radeon 0000:00:01.0: enabling device (0006 -> 0007)
[drm] initializing kernel modesetting (KAVERI 0x1002:0x1313 0x1002:0x0123).
[drm] register mmio base: 0xFEB00000
[drm] register mmio size: 262144
[drm] doorbell mmio base: 0xD0800000
[drm] doorbell mmio size: 8388608
ATOM BIOS: 113
radeon 0000:00:01.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:00:01.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 3541118 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 2048M of GTT memory ready.
[drm] Loading kaveri Microcode
[drm] Internal thermal controller without fan control
[drm] radeon: dpm initialized
[drm] Found VCE firmware/feedback version 40.2.2 / 15!
[drm] GART: num cpu pages 524288, num gpu pages 524288
[drm] PCIE GART of 2048M enabled (table at 0x0000000000324000).
radeon 0000:00:01.0: WB enabled
radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88003554dc00
radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff88003554dc04
radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff88003554dc08
radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88003554dc0c
radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff88003554dc10
usb 5-1: new high-speed USB device number 2 using ehci-pci
radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc90001c36c98
radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0xffff88003554dc18
radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0xffff88003554dc1c
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:00:01.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 3 usecs
[drm] ring test on 1 succeeded in 2 usecs
[drm] ring test on 2 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ring test on 5 succeeded in 1 usecs
r8169 0000:02:00.0 enp2s0: renamed from eth0
[drm] UVD initialized successfully.
usb 5-1: New USB device found, idVendor=1908, idProduct=2310
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1: Product: USB2.0 PC CAMERA
usb 5-1: Manufacturer: Generic
usb 5-1: SerialNumber: 20100331010203
[drm] ring test on 6 succeeded in 14 usecs
[drm] ring test on 7 succeeded in 4 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
usb 8-3: new full-speed USB device number 2 using ohci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: ST500LM012 HN-M500MBB, 2BA30001, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
usb 8-3: New USB device found, idVendor=8087, idProduct=07dc
usb 8-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST500LM012 HN-M5 0001 PQ: 0 ANSI: 5
ata3.00: ATAPI: TSSTcorp CDDVDW SH-S223B, SB02, max UDMA/100
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: configured for UDMA/100
ata4.00: supports DRM functions and may not be fully accessible
ata4.00: READ LOG DMA EXT failed, trying unqueued
ata4.00: failed to get NCQ Send/Recv Log Emask 0x1
ata4.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0BB6Q, max UDMA/133
ata4.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata4.00: supports DRM functions and may not be fully accessible
ata4.00: failed to get NCQ Send/Recv Log Emask 0x1
ata4.00: configured for UDMA/133
ata2.00: ATA-7: SAMSUNG HD502HI, 1AG01118, max UDMA7
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD502HI 1118 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223B SB02 PQ: 0 ANSI: 5
sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg2 type 5
scsi 3:0:0:0: Direct-Access ATA Samsung SSD 840 BB6Q PQ: 0 ANSI: 5
sd 3:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2
sd 3:0:0:0: [sdc] Attached SCSI disk
usb 5-3: new high-speed USB device number 4 using ehci-pci
usb 7-2: new full-speed USB device number 2 using ohci-pci
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 3493.860 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x325ca8f8c96, max_idle_ns: 440795302480 ns
usb 5-3: New USB device found, idVendor=05e3, idProduct=0745
usb 5-3: New USB device strings: Mfr=0, Product=1, SerialNumber=2
usb 5-3: Product: USB Storage
usb 5-3: SerialNumber: 000000000903
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
usb 7-2: New USB device found, idVendor=056a, idProduct=030e
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2: Product: Intuos PS
usb 7-2: Manufacturer: Wacom Co.,Ltd.
hidraw: raw HID events driver (C) Jiri Kosina
usb 8-4: new low-speed USB device number 3 using ohci-pci
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Wacom Intuos S Pen as /devices/pci0000:00/0000:00:12.0/usb7/7-2/7-2:1.0/0003:056A:030E.0001/input/input7
wacom 0003:056A:030E.0001: hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PS] on usb-0000:00:12.0-2/input0
input: Wacom Intuos S Pad as /devices/pci0000:00/0000:00:12.0/usb7/7-2/7-2:1.1/0003:056A:030E.0002/input/input12
wacom 0003:056A:030E.0002: hidraw1: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PS] on usb-0000:00:12.0-2/input1
usb-storage 5-3:1.0: USB Mass Storage device detected
scsi host6: usb-storage 5-3:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
usb 8-4: New USB device found, idVendor=093a, idProduct=2510
usb 8-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-4: Product: USB Optical Mouse
usb 8-4: Manufacturer: PixArt
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb8/8-4/8-4:1.0/0003:093A:2510.0004/input/input13
hid-generic 0003:093A:2510.0004: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:13.0-4/input0
usb 8-5: new low-speed USB device number 4 using ohci-pci
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DVI-D-1
[drm] HPD3
[drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD1
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
[drm] Connector 2:
[drm] HDMI-A-2
[drm] HPD2
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY3
radeon 0000:00:01.0: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
[drm] fb mappable at 0xB0728000
[drm] vram apper at 0xB0000000
[drm] size 3145728
[drm] fb depth is 24
[drm] pitch is 4096
checking generic (c0000000 7f0000) vs hw (b0000000 10000000)
radeon 0000:00:01.0: fb1: radeondrmfb frame buffer device
radeon 0000:00:01.0: registered panic notifier
ACPI Error: [\_SB_.ALIB] Namespace lookup failure, AE_NOT_FOUND (20150619/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.ATC0] (Node ffff8802470bca28), AE_NOT_FOUND (20150619/psparse-536)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.ATCS] (Node ffff8802470bca00), AE_NOT_FOUND (20150619/psparse-536)
kfd kfd: Allocated 3944480 bytes on gart for device(1002:1313)
kfd kfd: error getting iommu info. is the iommu enabled?
kfd kfd: Error initializing iommuv2 for device (1002:1313)
Creating topology SYSFS entries
kfd kfd: device (1002:1313) NOT added due to errors
[drm] Initialized radeon 2.43.0 20080528 for 0000:00:01.0 on minor 0
checking generic (c0000000 7f0000) vs hw (c0000000 10000000)
fb: switching to radeondrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (BONAIRE 0x1002:0x6658 0x1458:0x2271).
[drm] register mmio base: 0xFEA00000
[drm] register mmio size: 262144
[drm] doorbell mmio base: 0xD0000000
[drm] doorbell mmio size: 8388608
vga_switcheroo: enabled
ATPX version 1, functions 0x00000000
radeon 0000:01:00.0: Invalid ROM contents
ATOM BIOS: GV
radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
radeon 0000:01:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 128bits DDR
[drm] radeon: 2048M of VRAM memory ready
[drm] radeon: 2048M of GTT memory ready.
[drm] Loading bonaire Microcode
[drm] Internal thermal controller with fan control
[drm] probing gen 2 caps for device 1022:1425 = 733d03/e
[drm] radeon: dpm initialized
[drm] Found VCE firmware/feedback version 40.2.2 / 15!
[drm] GART: num cpu pages 524288, num gpu pages 524288
[drm] probing gen 2 caps for device 1022:1425 = 733d03/e
[drm] PCIE gen 3 link speeds already enabled
[drm] PCIE GART of 2048M enabled (table at 0x0000000000324000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88023f296c00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88023f296c04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88023f296c08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88023f296c0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88023f296c10
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc90003436c98
radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000080000c18 and cpu addr 0xffff88023f296c18
radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000080000c1c and cpu addr 0xffff88023f296c1c
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 3 usecs
[drm] ring test on 1 succeeded in 3 usecs
[drm] ring test on 2 succeeded in 3 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
usb 8-5: New USB device found, idVendor=258a, idProduct=0001
usb 8-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-5: Product: USB KEYBOARD
usb 8-5: Manufacturer: SINO WEALTH
input: SINO WEALTH USB KEYBOARD as /devices/pci0000:00/0000:00:13.0/usb8/8-5/8-5:1.0/0003:258A:0001.0005/input/input14
hid-generic 0003:258A:0001.0005: input,hidraw3: USB HID v1.10 Keyboard [SINO WEALTH USB KEYBOARD] on usb-0000:00:13.0-5/input0
input: SINO WEALTH USB KEYBOARD as /devices/pci0000:00/0000:00:13.0/usb8/8-5/8-5:1.1/0003:258A:0001.0006/input/input15
[drm] ring test on 6 succeeded in 20 usecs
[drm] ring test on 7 succeeded in 4 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
hid-generic 0003:258A:0001.0006: input,hiddev0,hidraw4: USB HID v1.10 Device [SINO WEALTH USB KEYBOARD] on usb-0000:00:13.0-5/input1
clocksource: Switched to clocksource tsc
scsi 6:0:0:0: Direct-Access Generic STORAGE DEVICE 0903 PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg4 type 0
sd 6:0:0:0: [sdd] Attached SCSI removable disk
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD2
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] HDMI-A-3
[drm] HPD3
[drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] DVI-D-2
[drm] HPD1
[drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY1
[drm] Connector 3:
[drm] DVI-I-1
[drm] HPD6
[drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] fb mappable at 0xC0727000
[drm] vram apper at 0xC0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 1
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
random: nonblocking pool is initialized
systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
systemd[1]: Failed to insert module 'kdbus': Function not implemented
systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Created slice Root Slice.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Mounting Debug File System...
systemd[1]: Started Braille Device Support.
systemd[1]: Started Read required files in advance.
systemd[1]: Reached target Slices.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Started Journal Service.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
ACPI Error: [\_SB_.ALIB] Namespace lookup failure, AE_NOT_FOUND (20150619/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.PX02] (Node ffff8802470bc8c0), AE_NOT_FOUND (20150619/psparse-536)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.ATPX] (Node ffff8802470bc848), AE_NOT_FOUND (20150619/psparse-536)
systemd-journald[266]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
ACPI Error: [\_SB_.ALIB] Namespace lookup failure, AE_NOT_FOUND (20150619/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.PX02] (Node ffff8802470bc8c0), AE_NOT_FOUND (20150619/psparse-536)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.ATPX] (Node ffff8802470bc848), AE_NOT_FOUND (20150619/psparse-536)
MCE: In-kernel MCE decoding enabled.
[drm:ci_dpm_enable [radeon]] *ERROR* ci_start_dpm failed
[drm:radeon_pm_resume [radeon]] *ERROR* radeon: dpm resume failed
[drm] probing gen 2 caps for device 1022:1425 = 733d03/e
[drm] PCIE gen 3 link speeds already enabled
[drm] PCIE GART of 2048M enabled (table at 0x0000000000324000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88023f296c00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88023f296c04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88023f296c08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88023f296c0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88023f296c10
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc90003436c98
radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000080000c18 and cpu addr 0xffff88023f296c18
radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000080000c1c and cpu addr 0xffff88023f296c1c
[drm] ring test on 0 succeeded in 3 usecs
[drm] ring test on 1 succeeded in 13 usecs
[drm] ring test on 2 succeeded in 16 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 4 usecs
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
EDAC MC: Ver: 3.0.0
[drm] ring test on 5 succeeded in 2 usecs
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[drm] UVD initialized successfully.
media: Linux media interface: v0.10
usbcore: registered new interface driver snd-usb-audio
usbcore: registered new interface driver btusb
Bluetooth: hci0: read Intel version: 370710018002030d00
snd_hda_intel 0000:00:01.1: Force to non-snoop mode
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
snd_hda_intel 0000:01:00.1: VGA controller is disabled
snd_hda_intel 0000:01:00.1: Delaying initialization
Linux video capture interface: v2.00
[drm] ring test on 6 succeeded in 1037 usecs
[drm] ring test on 7 succeeded in 3 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input16
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input17
snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC2D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC2D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC2D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC2D0: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC2D0: inputs:
snd_hda_codec_realtek hdaudioC2D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC2D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC2D0: Line=0x1a
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card2/input18
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card2/input19
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card2/input20
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card2/input21
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card2/input22
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card2/input23
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card2/input24
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
uvcvideo: Found UVC 1.00 device USB2.0 PC CAMERA (1908:2310)
input: USB2.0 PC CAMERA as /devices/pci0000:00/0000:00:12.2/usb5/5-1/5-1:1.0/input/input25
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
[drm] ib test on ring 1 succeeded in 0 usecs
iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-7260-15.ucode failed with error -2
iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-7260-14.ucode failed with error -2
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
iwlwifi 0000:04:00.0: loaded firmware version 25.30.13.0 op_mode iwlmvm
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
iwlwifi 0000:04:00.0: L1 Disabled - LTR Disabled
iwlwifi 0000:04:00.0: L1 Disabled - LTR Disabled
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm:radeon_pm_resume [radeon]] *ERROR* radeon: dpm resume failed
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
iwlwifi 0000:04:00.0 wlp4s0: renamed from wlan0
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Adding 5963772k swap on /dev/sda2. Priority:-1 extents:1 across:5963772k FS
audit: type=1400 audit(1452628992.683:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=580 comm="apparmor_parser"
audit: type=1400 audit(1452628992.683:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=580 comm="apparmor_parser"
audit: type=1400 audit(1452628992.731:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=580 comm="apparmor_parser"
audit: type=1400 audit(1452628992.731:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=580 comm="apparmor_parser"
audit: type=1400 audit(1452628992.731:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=580 comm="apparmor_parser"
audit: type=1400 audit(1452628992.731:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=580 comm="apparmor_parser"
audit: type=1400 audit(1452628992.867:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=580 comm="apparmor_parser"
audit: type=1400 audit(1452628992.867:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=580 comm="apparmor_parser"
audit: type=1400 audit(1452628992.867:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=580 comm="apparmor_parser"
audit: type=1400 audit(1452628992.867:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=580 comm="apparmor_parser"
cgroup: new mount options do not match the existing superblock, will be ignored
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
iwlwifi 0000:04:00.0: L1 Disabled - LTR Disabled
iwlwifi 0000:04:00.0: L1 Disabled - LTR Disabled
iwlwifi 0000:04:00.0: L1 Disabled - LTR Disabled
iwlwifi 0000:04:00.0: L1 Disabled - LTR Disabled
IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
ACPI Error: [\_SB_.ALIB] Namespace lookup failure, AE_NOT_FOUND (20150619/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.PX02] (Node ffff8802470bc8c0), AE_NOT_FOUND (20150619/psparse-536)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.ATPX] (Node ffff8802470bc848), AE_NOT_FOUND (20150619/psparse-536)
r8169 0000:02:00.0 enp2s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link down
IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
ACPI Error: [\_SB_.ALIB] Namespace lookup failure, AE_NOT_FOUND (20150619/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.PX02] (Node ffff8802470bc8c0), AE_NOT_FOUND (20150619/psparse-536)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.ATPX] (Node ffff8802470bc848), AE_NOT_FOUND (20150619/psparse-536)
[drm:ci_dpm_enable [radeon]] *ERROR* ci_start_dpm failed
[drm:radeon_pm_resume [radeon]] *ERROR* radeon: dpm resume failed
[drm] probing gen 2 caps for device 1022:1425 = 733d03/e
[drm] PCIE gen 3 link speeds already enabled
[drm] PCIE GART of 2048M enabled (table at 0x0000000000324000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88023f296c00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88023f296c04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88023f296c08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88023f296c0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88023f296c10
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc90003436c98
radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000080000c18 and cpu addr 0xffff88023f296c18
radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000080000c1c and cpu addr 0xffff88023f296c1c
[drm] ring test on 0 succeeded in 3 usecs
[drm] ring test on 1 succeeded in 17 usecs
[drm] ring test on 2 succeeded in 16 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ring test on 6 succeeded in 995 usecs
[drm] ring test on 7 succeeded in 3 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
r8169 0000:02:00.0 enp2s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm:radeon_pm_resume [radeon]] *ERROR* radeon: dpm resume failed
snd_hda_intel 0000:01:00.1: Start delayed initialization
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card3/input26
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card3/input27
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card3/input28
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card3/input29
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card3/input30
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card3/input31
snd_hda_codec_hdmi hdaudioC3D0: HDMI ATI/AMD: no speaker allocation for ELD
snd_hda_codec_hdmi hdaudioC3D0: HDMI ATI/AMD: no speaker allocation for ELD
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
vgaarb: device changed decodes: PCI:0000:00:01.0,olddecodes=io+mem,decodes=none:owns=mem
snd_hda_codec_hdmi hdaudioC3D0: HDMI ATI/AMD: no speaker allocation for ELD
snd_hda_codec_hdmi hdaudioC3D0: HDMI ATI/AMD: no speaker allocation for ELD
snd_hda_codec_hdmi hdaudioC3D0: HDMI ATI/AMD: no speaker allocation for ELD
snd_hda_codec_hdmi hdaudioC3D0: HDMI ATI/AMD: no speaker allocation for ELD
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 4 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3495055463 Hz
vboxdrv: Successfully loaded version 5.0.10_Ubuntu (interface 0x00240000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
ata1.00: exception Emask 0x10 SAct 0x7ff1ffff SErr 0x400000 action 0x6 frozen
ata1.00: irq_stat 0x08000000, interface fatal error
ata1: SError: { Handshk }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/98:00:b0:6b:4d/00:00:19:00:00/40 tag 0 ncq 77824 out
res 40/00:84:40:8a:4f/00:00:19:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/28:08:50:6c:4d/03:00:19:00:00/40 tag 1 ncq 413696 out
res 40/00:84:40:8a:4f/00:00:19:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/98:10:80:6f:4d/01:00:19:00:00/40 tag 2 ncq 208896 out
res 40/00:84:40:8a:4f/00:00:19:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/48:18:20:71:4d/02:00:19:00:00/40 tag 3 ncq 299008 out
res 40/00:84:40:8a:4f/00:00:19:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/d8:20:68:73:4d/03:00:19:00:00/40 tag 4 ncq 503808 out
res 40/00:84:40:8a:4f/00:00:19:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/a8:28:40:77:4d/00:00:19:00:00/40 tag 5 ncq 86016 out
res 40/00:84:40:8a:4f/00:00:19:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/40:30:e8:77:4d/05:00:19:00:00/40 tag 6 ncq 688128 out
res 40/00:84:40:8a:4f/00:00:19:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/40:38:28:7d:4d/05:00:19:00:00/40 tag 7 ncq 688128 out
res 40/00:84:40:8a:4f/00:00:19:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/40:40:68:82:4d/01:00:19:00:00/40 tag 8 ncq 163840 out
res 40/00:84:40:8a:4f/00:00:19:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/28:48:b0:83:4d/01:00:19:00:00/40 tag 9 ncq 151552 out
res 40/00:84:40:8a:4f/00:00:19:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/08:50:e0:84:4d/02:00:19:00:00/40 tag 10 ncq 266240 out
res 40/00:84:40:8a:4f/00:00:19:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/10:58:f0:86:4d/01:00:19:00:00/40 tag 11 ncq 139264 out
res 40/00:84:40:8a:4f/00:00:19:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/40:60:00:88:4d/05:00:19:00:00/40 tag 12 ncq 688128 out
res 40/00:84:40:8a:4f/00:00:19:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/30:68:40:8d:4d/00:00:19:00:00/40 tag 13 ncq 24576 out
res 40/00:84:40:8a:4f/00:00:19:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/50:70:00:88:4f/00:00:19:00:00/40 tag 14 ncq 40960 out
res 40/00:84:40:8a:4f/00:00:19:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/d8:78:60:88:4f/01:00:19:00:00/40 tag 15 ncq 241664 out
res 40/00:84:40:8a:4f/00:00:19:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/a0:80:40:8a:4f/00:00:19:00:00/40 tag 16 ncq 81920 out
res 40/00:84:40:8a:4f/00:00:19:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/40:a0:c0:fa:4f/05:00:19:00:00/40 tag 20 ncq 688128 out
res 40/00:84:40:8a:4f/00:00:19:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/40:a8:00:00:50/05:00:19:00:00/40 tag 21 ncq 688128 out
res 40/00:84:40:8a:4f/00:00:19:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/78:b0:40:05:50/02:00:19:00:00/40 tag 22 ncq 323584 out
res 40/00:84:40:8a:4f/00:00:19:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/48:b8:b8:07:50/00:00:19:00:00/40 tag 23 ncq 36864 out
res 40/00:84:40:8a:4f/00:00:19:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/20:c0:00:48:4d/05:00:19:00:00/40 tag 24 ncq 671744 out
res 40/00:84:40:8a:4f/00:00:19:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/40:c8:20:4d:4d/05:00:19:00:00/40 tag 25 ncq 688128 out
res 40/00:84:40:8a:4f/00:00:19:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/40:d0:60:52:4d/05:00:19:00:00/40 tag 26 ncq 688128 out
res 40/00:84:40:8a:4f/00:00:19:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/60:d8:a0:57:4d/05:00:19:00:00/40 tag 27 ncq 704512 out
res 40/00:84:40:8a:4f/00:00:19:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/18:e0:00:5d:4d/05:00:19:00:00/40 tag 28 ncq 667648 out
res 40/00:84:40:8a:4f/00:00:19:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/18:e8:18:62:4d/05:00:19:00:00/40 tag 29 ncq 667648 out
res 40/00:84:40:8a:4f/00:00:19:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/78:f0:30:67:4d/04:00:19:00:00/40 tag 30 ncq 585728 out
res 40/00:84:40:8a:4f/00:00:19:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1: hard resetting link
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x10 SAct 0x380000 SErr 0x400000 action 0x6 frozen
ata1.00: irq_stat 0x08000000, interface fatal error
ata1: SError: { Handshk }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/80:98:40:a2:7a/4a:00:00:00:00/40 tag 19 ncq 9764864 out
res 40/00:ac:00:32:7b/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/40:a0:c0:ec:7a/45:00:00:00:00/40 tag 20 ncq 9076736 out
res 40/00:ac:00:32:7b/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/40:a8:00:32:7b/45:00:00:00:00/40 tag 21 ncq 9076736 out
res 40/00:ac:00:32:7b/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1: hard resetting link
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
SUPR0GipMap: fGetGipCpu=0x3
vboxdrv: ffffffffc08ff020 VMMR0.r0
vboxdrv: ffffffffc09f9020 VBoxDDR0.r0
vboxdrv: ffffffffc00b0020 VBoxDD2R0.r0
PS2K: Selected scan set 2
vboxdrv: ffffffffc0a18020 VMMR0.r0
vboxdrv: ffffffffc0b12020 VBoxDDR0.r0
vboxdrv: ffffffffc031f020 VBoxDD2R0.r0
PS2K: Selected scan set 2
PS2K: Selected scan set 2
SGI XFS with ACLs, security attributes, realtime, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
ntfs: driver 2.1.32 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
raid6: sse2x1 gen() 6342 MB/s
raid6: sse2x1 xor() 4245 MB/s
raid6: sse2x2 gen() 9854 MB/s
raid6: sse2x2 xor() 6515 MB/s
raid6: sse2x4 gen() 10892 MB/s
raid6: sse2x4 xor() 5060 MB/s
raid6: using algorithm sse2x4 gen() 10892 MB/s
raid6: .... xor() 5060 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 9758.000 MB/sec
Btrfs loaded
PS2K: Selected scan set 2
vboxdrv: ffffffffc0a13020 VMMR0.r0
vboxdrv: ffffffffc0b0d020 VBoxDDR0.r0
vboxdrv: ffffffffc00b0020 VBoxDD2R0.r0
PS2K: Selected scan set 2
show_signal_msg: 39 callbacks suppressed
conftest[2344]: segfault at 0 ip 00000000004005c0 sp 00007fff13a447c0 error 4 in conftest[400000+1000]
conftest[2373]: segfault at 0 ip 00007f4032460e36 sp 00007ffc093ae078 error 4 in libc-2.21.so[7f4032313000+1c0000]
vboxdrv: ffffffffc0a13020 VMMR0.r0
vboxdrv: ffffffffc0b0d020 VBoxDDR0.r0
vboxdrv: ffffffffc00b0020 VBoxDD2R0.r0
PS2K: Selected scan set 2