dmesg - kernel_run
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-1.el7.elrepo.x86_64 (mockbuild@Build64R7) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-4) (GCC) ) #1 SMP Sun Jan 10 21:17:16 EST 2016
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 960, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]: 64
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x08: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x10: 'MPX CSR'
x86/fpu: Enabled xstate features 0x1f, context size is 1088 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bf873fff] usable
BIOS-e820: [mem 0x00000000bf874000-0x00000000bf874fff] ACPI NVS
BIOS-e820: [mem 0x00000000bf875000-0x00000000bf8befff] reserved
BIOS-e820: [mem 0x00000000bf8bf000-0x00000000c2f53fff] usable
BIOS-e820: [mem 0x00000000c2f54000-0x00000000c3e6cfff] reserved
BIOS-e820: [mem 0x00000000c3e6d000-0x00000000c3e97fff] ACPI data
BIOS-e820: [mem 0x00000000c3e98000-0x00000000c7b8bfff] ACPI NVS
BIOS-e820: [mem 0x00000000c7b8c000-0x00000000c7ffdfff] reserved
BIOS-e820: [mem 0x00000000c7ffe000-0x00000000c7ffefff] usable
BIOS-e820: [mem 0x00000000c8000000-0x00000000c80fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000008317fffff] usable
NX (Execute Disable) protection: active
SMBIOS 3.0 present.
DMI: FUJITSU D3401-H1/D3401-H1, BIOS V5.0.0.11 R1.7.0.SR.2 for D3401-H1x 11/25/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x831800 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00E0000000 mask 7FE0000000 uncachable
1 base 00D0000000 mask 7FF0000000 uncachable
2 base 00CC000000 mask 7FFC000000 uncachable
3 base 00CA000000 mask 7FFE000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0xc7fff max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcb60-0x000fcb6f] mapped at [ffff8800000fcb60]
Base memory trampoline at [ffff880000096000] 96000 size 24576
Using GB pages for direct mapping
BRK [0x02008000, 0x02008fff] PGTABLE
BRK [0x02009000, 0x02009fff] PGTABLE
BRK [0x0200a000, 0x0200afff] PGTABLE
BRK [0x0200b000, 0x0200bfff] PGTABLE
BRK [0x0200c000, 0x0200cfff] PGTABLE
BRK [0x0200d000, 0x0200dfff] PGTABLE
RAMDISK: [mem 0x30c4b000-0x3461dfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F05B0 000024 (v02 FUJ )
ACPI: XSDT 0x00000000C3E710A0 0000BC (v01 FUJ D3401-H1 10700000 AMI 00010013)
ACPI: FACP 0x00000000C3E8CEA8 00010C (v05 FUJ D3401-H1 10700000 AMI 00010013)
ACPI: DSDT 0x00000000C3E711E8 01BCC0 (v02 FUJ D3401-H1 10700000 INTL 20120913)
ACPI: FACS 0x00000000C7B8BF80 000040
ACPI: APIC 0x00000000C3E8CFB8 0000BC (v03 FUJ D3401-H1 10700000 AMI 00010013)
ACPI: FPDT 0x00000000C3E8D078 000044 (v01 FUJ D3401-H1 10700000 AMI 00010013)
ACPI: FIDT 0x00000000C3E8D0C0 00009C (v01 FUJ D3401-H1 10700000 AMI 00010013)
ACPI: MCFG 0x00000000C3E8D160 00003C (v01 FUJ D3401-H1 10700000 MSFT 00000097)
ACPI: HPET 0x00000000C3E8D1A0 000038 (v01 FUJ D3401-H1 10700000 AMI. 0005000B)
ACPI: SSDT 0x00000000C3E8D1D8 0003C5 (v01 SataRe SataTabl 00001000 INTL 20120913)
ACPI: LPIT 0x00000000C3E8D5A0 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
ACPI: SSDT 0x00000000C3E8D638 000248 (v02 INTEL sensrhub 00000000 INTL 20120913)
ACPI: SSDT 0x00000000C3E8D880 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913)
ACPI: SSDT 0x00000000C3E90430 000BE3 (v02 INTEL Ther_Rvp 00001000 INTL 20120913)
ACPI: SSDT 0x00000000C3E91018 0006DC (v02 INTEL USB_MAP 00000000 INTL 20120913)
ACPI: DBGP 0x00000000C3E916F8 000034 (v01 INTEL 00000000 MSFT 0000005F)
ACPI: DBG2 0x00000000C3E91730 000054 (v00 INTEL 00000000 MSFT 0000005F)
ACPI: SSDT 0x00000000C3E91788 004C13 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
ACPI: UEFI 0x00000000C3E963A0 000042 (v01 00000000 00000000)
ACPI: SSDT 0x00000000C3E963E8 000E6E (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
ACPI: DMAR 0x00000000C3E97258 0000A8 (v01 INTEL SKL 00000001 INTL 00000001)
ACPI: ASF! 0x00000000C3E97300 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000008317fffff]
NODE_DATA(0) allocated [mem 0x8317db000-0x8317fcfff]
kexec_core: crashkernel: memory value expected
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000008317fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009bfff]
node 0: [mem 0x0000000000100000-0x00000000bf873fff]
node 0: [mem 0x00000000bf8bf000-0x00000000c2f53fff]
node 0: [mem 0x00000000c7ffe000-0x00000000c7ffefff]
node 0: [mem 0x0000000100000000-0x00000008317fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000008317fffff]
On node 0 totalpages: 8341157
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3995 pages, LIFO batch:0
DMA32 zone: 12413 pages used for memmap
DMA32 zone: 794378 pages, LIFO batch:31
Normal zone: 117856 pages used for memmap
Normal zone: 7542784 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xca800000-0xcc7fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbf874000-0xbf874fff]
PM: Registered nosave memory: [mem 0xbf875000-0xbf8befff]
PM: Registered nosave memory: [mem 0xc2f54000-0xc3e6cfff]
PM: Registered nosave memory: [mem 0xc3e6d000-0xc3e97fff]
PM: Registered nosave memory: [mem 0xc3e98000-0xc7b8bfff]
PM: Registered nosave memory: [mem 0xc7b8c000-0xc7ffdfff]
PM: Registered nosave memory: [mem 0xc7fff000-0xc7ffffff]
PM: Registered nosave memory: [mem 0xc8000000-0xc80fffff]
PM: Registered nosave memory: [mem 0xc8100000-0xca7fffff]
PM: Registered nosave memory: [mem 0xca800000-0xcc7fffff]
PM: Registered nosave memory: [mem 0xcc800000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xcc800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 34 pages/cpu @ffff880831400000 s98584 r8192 d32488 u262144
pcpu-alloc: s98584 r8192 d32488 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 8210803
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 32697056K/33364628K available (7075K kernel code, 1429K rwdata, 3416K rodata, 1768K init, 2676K bss, 667572K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:524544 nr_irqs:2048 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: Unable to calibrate against PIT
tsc: using HPET reference calibration
tsc: Detected 3408.307 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6816.61 BogoMIPS (lpj=3408307)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20150930/dswload-210)
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20150930/psobject-227)
ACPI Exception: AE_NOT_FOUND, (SSDT:USB_MAP ) while loading table (20150930/tbxfload-193)
ACPI Error: 1 table load failures, 7 successful (20150930/tbxfload-214)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 24K (ffffffff81d63000 - ffffffff81d69000)
ftrace: allocating 28234 entries in 111 pages
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x000000c3be7000 end: 0x000000c3c06fff
DMAR: RMRR base: 0x000000ca000000 end: 0x000000cc7fffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz (family: 0x6, model: 0x5e, stepping: 0x3)
Performance Events: PEBS fmt3+, 32-deep LBR, Skylake events, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (54532.91 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xbf874000-0xbf874fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xc3e98000-0xc7b8bfff] (63913984 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 21 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88080C904400 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88080C8F3800 0006E4 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88080C8F4000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88080C92FA00 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xcc800000-0xf7ffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
pci 0000:00:02.0: [8086:1912] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7020000-0xf702ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xf703a000-0xf703afff 64bit]
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7039000-0xf7039fff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xf7034000-0xf7035fff]
pci 0000:00:17.0: reg 0x14: [mem 0xf7038000-0xf70380ff]
pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:17.0: reg 0x24: [mem 0xf7037000-0xf70377ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1f.0: [8086:a148] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xf7030000-0xf7033fff]
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xf7036000-0xf70360ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:1f.6: [8086:15b7] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xf7000000-0xf701ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.6: System wakeup disabled by ACPI
ACPI: PCI Interrupt Link [LNKA] (IRQs 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 6 10 *11 12 14 15)
ACPI: Enabled 5 GPEs in block 00 to 7F
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbf874000-0xbfffffff]
e820: reserve RAM buffer [mem 0xc2f54000-0xc3ffffff]
e820: reserve RAM buffer [mem 0xc7fff000-0xc7ffffff]
e820: reserve RAM buffer [mem 0x831800000-0x833ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [io 0x0a00-0x0a0f] has been reserved
system 00:00: [io 0x0a10-0x0a1f] has been reserved
system 00:00: [io 0x0a20-0x0a2f] has been reserved
system 00:00: [io 0x0a30-0x0a3f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0400-0x041f] has been reserved
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x1800-0x18fe] could not be reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0800-0x087f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x1854-0x1857] has been reserved
system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: [mem 0xf7fe0000-0xf7ffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0xff00-0xfffe] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xcc800000-0xf7ffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 59212K (ffff880030c4b000 - ffff88003461e000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbb874000-0xbf874000] (64MB) mapped at [ffff8800bb874000-ffff8800bf873fff]
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1452541534.764:1): initialized
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Key type big_key registered
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x142120
intel_idle: v0.4 model 0x5E
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff880810921690), AE_NOT_FOUND (20150930/psparse-542)
ACPI Error: Method parse/execution failed [\_TZ.FN00._ON] (Node ffff8808109210a0), AE_NOT_FOUND (20150930/psparse-542)
acpi PNP0C0B:00: Failed to change power state to D0
ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff880810921690), AE_NOT_FOUND (20150930/psparse-542)
ACPI Error: Method parse/execution failed [\_TZ.FN00._ON] (Node ffff8808109210a0), AE_NOT_FOUND (20150930/psparse-542)
acpi PNP0C0B:00: Setting initial power state
acpi PNP0C0B:00: Cannot transition from (unknown) to D3hot
ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff880810921690), AE_NOT_FOUND (20150930/psparse-542)
ACPI Error: Method parse/execution failed [\_TZ.FN01._ON] (Node ffff8808109211e0), AE_NOT_FOUND (20150930/psparse-542)
acpi PNP0C0B:01: Failed to change power state to D0
ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff880810921690), AE_NOT_FOUND (20150930/psparse-542)
ACPI Error: Method parse/execution failed [\_TZ.FN01._ON] (Node ffff8808109211e0), AE_NOT_FOUND (20150930/psparse-542)
acpi PNP0C0B:01: Setting initial power state
acpi PNP0C0B:01: Cannot transition from (unknown) to D3hot
ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff880810921690), AE_NOT_FOUND (20150930/psparse-542)
ACPI Error: Method parse/execution failed [\_TZ.FN02._ON] (Node ffff880810921320), AE_NOT_FOUND (20150930/psparse-542)
acpi PNP0C0B:02: Failed to change power state to D0
ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff880810921690), AE_NOT_FOUND (20150930/psparse-542)
ACPI Error: Method parse/execution failed [\_TZ.FN02._ON] (Node ffff880810921320), AE_NOT_FOUND (20150930/psparse-542)
acpi PNP0C0B:02: Setting initial power state
acpi PNP0C0B:02: Cannot transition from (unknown) to D3hot
ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff880810921690), AE_NOT_FOUND (20150930/psparse-542)
ACPI Error: Method parse/execution failed [\_TZ.FN03._ON] (Node ffff880810921460), AE_NOT_FOUND (20150930/psparse-542)
acpi PNP0C0B:03: Failed to change power state to D0
ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff880810921690), AE_NOT_FOUND (20150930/psparse-542)
ACPI Error: Method parse/execution failed [\_TZ.FN03._ON] (Node ffff880810921460), AE_NOT_FOUND (20150930/psparse-542)
acpi PNP0C0B:03: Setting initial power state
acpi PNP0C0B:03: Cannot transition from (unknown) to D3hot
ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff880810921690), AE_NOT_FOUND (20150930/psparse-542)
ACPI Error: Method parse/execution failed [\_TZ.FN04._ON] (Node ffff8808109215a0), AE_NOT_FOUND (20150930/psparse-542)
acpi PNP0C0B:04: Failed to change power state to D0
ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff880810921690), AE_NOT_FOUND (20150930/psparse-542)
ACPI Error: Method parse/execution failed [\_TZ.FN04._ON] (Node ffff8808109215a0), AE_NOT_FOUND (20150930/psparse-542)
acpi PNP0C0B:04: Setting initial power state
acpi PNP0C0B:04: Cannot transition from (unknown) to D3hot
ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
ACPI Error: Method parse/execution failed [\_TZ.TZ00._TMP] (Node ffff8808109218e8), AE_NOT_FOUND (20150930/psparse-542)
ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
ACPI Error: Method parse/execution failed [\_TZ.TZ00._TMP] (Node ffff8808109218e8), AE_NOT_FOUND (20150930/psparse-542)
ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
ACPI Error: Method parse/execution failed [\_TZ.TZ01._TMP] (Node ffff8808109219b0), AE_NOT_FOUND (20150930/psparse-542)
ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
ACPI Error: Method parse/execution failed [\_TZ.TZ01._TMP] (Node ffff8808109219b0), AE_NOT_FOUND (20150930/psparse-542)
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-1.el7.elrepo.x86_64 xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 12 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-1.el7.elrepo.x86_64 xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbcore: registered new interface driver wishbone_serial
i8042: PNP: No PS/2 controller found. Probing ports directly.
tsc: Refined TSC clocksource calibration: 3407.989 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fc9c9451, max_idle_ns: 440795361646 ns
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
usb 1-8: new high-speed USB device number 2 using xhci_hcd
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Intel P-state driver initializing.
intel_pstate: HWP enabled
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
microcode: CPU0 sig=0x506e3, pf=0x2, revision=0x55
microcode: CPU1 sig=0x506e3, pf=0x2, revision=0x55
microcode: CPU2 sig=0x506e3, pf=0x2, revision=0x55
microcode: CPU3 sig=0x506e3, pf=0x2, revision=0x55
microcode: CPU4 sig=0x506e3, pf=0x2, revision=0x55
microcode: CPU5 sig=0x506e3, pf=0x2, revision=0x55
microcode: CPU6 sig=0x506e3, pf=0x2, revision=0x55
microcode: CPU7 sig=0x506e3, pf=0x2, revision=0x55
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
rtc_cmos 00:03: setting system clock to 2016-01-11 19:45:36 UTC (1452541536)
Freeing unused kernel memory: 1768K (ffffffff81ba9000 - ffffffff81d63000)
random: systemd urandom read with 11 bits of entropy available
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: No hostname configured.
systemd[1]: Set hostname to .
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Cannot add dependency job for unit multipathd.service, ignoring: Unit blk-availability.service failed to load: No such file or directory.
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting Local File Systems.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Timers.
systemd[1]: Starting Timers.
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Created slice -.slice.
systemd[1]: Starting -.slice.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Started dracut ask for additional cmdline parameters.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Started Device-Mapper Multipath Device Controller.
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Started Journal Service.
usb 1-8: New USB device found, idVendor=05e3, idProduct=0608
usb 1-8: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-8: Product: USB2.0 Hub
hub 1-8:1.0: USB hub found
hub 1-8:1.0: 4 ports detected
Loading iSCSI transport class v2.0-870.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
libata version 3.00 loaded.
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 5 ports 6 Gbps 0x3e impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m2048@0xf7037000 port 0xf7037180 irq 123
ata3: SATA max UDMA/133 abar m2048@0xf7037000 port 0xf7037200 irq 123
ata4: SATA max UDMA/133 abar m2048@0xf7037000 port 0xf7037280 irq 123
ata5: SATA max UDMA/133 abar m2048@0xf7037000 port 0xf7037300 irq 123
ata6: SATA max UDMA/133 abar m2048@0xf7037000 port 0xf7037380 irq 123
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
usb 1-8.2: new high-speed USB device number 3 using xhci_hcd
usb 1-8.2: New USB device found, idVendor=14dd, idProduct=0002
usb 1-8.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-8.2: Product: Multidevice
usb 1-8.2: Manufacturer: Peppercon AG
usb 1-8.2: SerialNumber: EF2B4604E7E2F57F492D7442C52B39DE
input: Peppercon AG Multidevice as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8.2/1-8.2:1.0/0003:14DD:0002.0001/input/input3
hid-generic 0003:14DD:0002.0001: input,hidraw0: USB HID v1.01 Keyboard [Peppercon AG Multidevice] on usb-0000:00:14.0-8.2/input0
input: Peppercon AG Multidevice as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8.2/1-8.2:1.1/0003:14DD:0002.0002/input/input4
hid-generic 0003:14DD:0002.0002: input,hidraw1: USB HID v1.01 Mouse [Peppercon AG Multidevice] on usb-0000:00:14.0-8.2/input1
e1000e 0000:00:1f.6 eth0: registered PHC clock
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 90:1b:0e:8a:54:39
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
usb 1-8.4: new low-speed USB device number 4 using xhci_hcd
ata5: SATA link down (SStatus 0 SControl 300)
usb 1-8.4: New USB device found, idVendor=04f2, idProduct=0402
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: supports DRM functions and may not be fully accessible
ata3.00: supports DRM functions and may not be fully accessible
ata6: SATA link down (SStatus 0 SControl 300)
ata2.00: ATA-10: Crucial_CT500MX200SSD1, MU03, max UDMA/133
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: ATA-10: Crucial_CT500MX200SSD1, MU03, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: supports DRM functions and may not be fully accessible
ata3.00: supports DRM functions and may not be fully accessible
usb 1-8.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-8.4: Product: USB Keyboard
usb 1-8.4: Manufacturer: Chicony
ata2.00: configured for UDMA/133
usb 1-8.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-8.4: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
ata3.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA Crucial_CT500MX2 MU03 PQ: 0 ANSI: 5
scsi 2:0:0:0: Direct-Access ATA Crucial_CT500MX2 MU03 PQ: 0 ANSI: 5
input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8.4/1-8.4:1.0/0003:04F2:0402.0003/input/input5
ata2.00: Enabling discard_zeroes_data
ata3.00: Enabling discard_zeroes_data
sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: [sda] 4096-byte physical blocks
sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: Enabling discard_zeroes_data
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
ata2.00: Enabling discard_zeroes_data
ata3.00: Enabling discard_zeroes_data
sd 1:0:0:0: [sda] Attached SCSI removable disk
sdb: sdb1 sdb2 sdb3
ata3.00: Enabling discard_zeroes_data
sd 2:0:0:0: [sdb] Attached SCSI removable disk
hid-generic 0003:04F2:0402.0003: input,hidraw2: USB HID v1.11 Keyboard [Chicony USB Keyboard] on usb-0000:00:14.0-8.4/input0
md: bind
md: bind
md: bind
md: bind
input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8.4/1-8.4:1.1/0003:04F2:0402.0004/input/input6
md: bind
md: raid0 personality registered for level 0
md/raid0:md2: md_size is 1884323840 sectors.
md: bind
md: RAID0 configuration for md2 - 1 zone
md: zone0=[sda3/sdb3]
md: raid1 personality registered for level 1
zone-offset= 0KB, device-offset= 0KB, size= 942161920KB
md/raid0:md0: md_size is 67106816 sectors.
md: RAID0 configuration for md0 - 1 zone
md: zone0=[sda1/sdb1]
zone-offset= 0KB, device-offset= 0KB, size= 33553408KB
md0: detected capacity change from 0 to 34358689792
md/raid1:md1: active with 2 out of 2 mirrors
md1: detected capacity change from 0 to 536543232
md2: detected capacity change from 0 to 964773806080
hid-generic 0003:04F2:0402.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Chicony USB Keyboard] on usb-0000:00:14.0-8.4/input1
clocksource: Switched to clocksource tsc
EXT4-fs (md2): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[153]: Received SIGTERM from PID 1 (systemd).
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit: type=1404 audit(1452541537.878:2): selinux=0 auid=4294967295 ses=4294967295
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: Inserted module 'ip_tables'
EXT4-fs (md2): re-mounted. Opts: (null)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
systemd-journald[728]: Received request to flush runtime journal from PID 1
random: nonblocking pool is initialized
input: Fujitsu FUJ02E3 as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/FUJ02E3:00/input/input7
fujitsu_laptop: ACPI: Fujitsu FUJ02E3 [FEXT] (on)
fujitsu_laptop: BTNI: [0x80000000]
fujitsu_laptop: driver 0.6.0 successfully loaded
e1000e 0000:00:1f.6 eth0: renamed from enp0s31f6
ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB_.PCI0.SBUS.SMBI) (20150930/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Bluetooth: Core ver 2.21
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: Attached scsi generic sg1 type 0
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol BCM registered
Bluetooth: HCI UART protocol QCA registered
EXT4-fs (md1): mounting ext3 file system using the ext4 subsystem
Adding 33553404k swap on /dev/md0. Priority:-1 extents:1 across:33553404k FS
EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1305 audit(1452541538.538:3): audit_pid=886 old=0 auid=4294967295 ses=4294967295 res=1
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Ebtables v2.0 registered
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
usb 1-8.2: USB disconnect, device number 3
usb 1-8.2: new high-speed USB device number 5 using xhci_hcd
usb 1-8.2: New USB device found, idVendor=14dd, idProduct=0002
usb 1-8.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-8.2: Product: Multidevice
usb 1-8.2: Manufacturer: Peppercon AG
usb 1-8.2: SerialNumber: EF2B4604E7E2F57F492D7442C52B39DE
input: Peppercon AG Multidevice as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8.2/1-8.2:1.0/0003:14DD:0002.0005/input/input8
hid-generic 0003:14DD:0002.0005: input,hidraw0: USB HID v1.01 Keyboard [Peppercon AG Multidevice] on usb-0000:00:14.0-8.2/input0
input: Peppercon AG Multidevice as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8.2/1-8.2:1.1/0003:14DD:0002.0006/input/input9
hid-generic 0003:14DD:0002.0006: input,hidraw1: USB HID v1.01 Mouse [Peppercon AG Multidevice] on usb-0000:00:14.0-8.2/input1
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.