dmesg - qwe

Return To qwe System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.0-123.el7.x86_64 (builder@kbuilder.dev.centos.org) (gcc version 4.8.2 20140120 (Red Hat 4.8.2-16) (GCC) ) #1 SMP Mon Jun 30 12:09:22 UTC 2014
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x00000000000997ff] usable
BIOS-e820: [mem 0x0000000000099800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007a03dfff] usable
BIOS-e820: [mem 0x000000007a03e000-0x000000007a600fff] reserved
BIOS-e820: [mem 0x000000007a601000-0x000000007a649fff] ACPI data
BIOS-e820: [mem 0x000000007a64a000-0x000000007bf8ffff] ACPI NVS
BIOS-e820: [mem 0x000000007bf90000-0x000000007dd5afff] reserved
BIOS-e820: [mem 0x000000007dd5b000-0x000000007dd5bfff] usable
BIOS-e820: [mem 0x000000007dd5c000-0x000000007dde1fff] reserved
BIOS-e820: [mem 0x000000007dde2000-0x000000007dffffff] usable
BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: ASUSTeK COMPUTER INC. Z10PA-D8 Series/Z10PA-D8 Series, BIOS 0502 03/31/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x880000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000080000000 mask 3FFF80000000 uncachable
  1 base 038000000000 mask 3FC000000000 uncachable
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
  8 disabled
  9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0x7e000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fda80-0x000fda8f] mapped at [ffff8800000fda80]
Base memory trampoline at [ffff880000093000] 93000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01e1d000, 0x01e1dfff] PGTABLE
BRK [0x01e1e000, 0x01e1efff] PGTABLE
BRK [0x01e1f000, 0x01e1ffff] PGTABLE
init_memory_mapping: [mem 0x87fe00000-0x87fffffff]
 [mem 0x87fe00000-0x87fffffff] page 1G
init_memory_mapping: [mem 0x87c000000-0x87fdfffff]
 [mem 0x87c000000-0x87fdfffff] page 1G
init_memory_mapping: [mem 0x800000000-0x87bffffff]
 [mem 0x800000000-0x87bffffff] page 1G
init_memory_mapping: [mem 0x00100000-0x7a03dfff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x79ffffff] page 2M
 [mem 0x7a000000-0x7a03dfff] page 4k
init_memory_mapping: [mem 0x7dd5b000-0x7dd5bfff]
 [mem 0x7dd5b000-0x7dd5bfff] page 4k
BRK [0x01e20000, 0x01e20fff] PGTABLE
init_memory_mapping: [mem 0x7dde2000-0x7dffffff]
 [mem 0x7dde2000-0x7ddfffff] page 4k
 [mem 0x7de00000-0x7dffffff] page 2M
init_memory_mapping: [mem 0x100000000-0x7ffffffff]
 [mem 0x100000000-0x7ffffffff] page 1G
RAMDISK: [mem 0x35e9c000-0x36f45fff]
Reserving 162MB of memory at 688MB for crashkernel (System RAM: 32673MB)
ACPI: RSDP 00000000000f0530 00024 (v02 ALASKA)
ACPI: XSDT 000000007a60f0b0 000D4 (v01 ALASKA   A M I  01072009 AMI  00010013)
ACPI: FACP 000000007a6370c0 0010C (v05 ALASKA   A M I  01072009 AMI  00010013)
ACPI: DSDT 000000007a60f218 27EA4 (v02 ALASKA   A M I  01072009 INTL 20091013)
ACPI: FACS 000000007bf8df80 00040
ACPI: APIC 000000007a6371d0 00138 (v03 ALASKA   A M I  01072009 AMI  00010013)
ACPI: FPDT 000000007a637308 00044 (v01 ALASKA   A M I  01072009 AMI  00010013)
ACPI: FIDT 000000007a637350 0009C (v01 ALASKA   A M I  01072009 AMI  00010013)
ACPI: MCFG 000000007a6373f0 0003C (v01 ALASKA    A M I 01072009 MSFT 00000097)
ACPI: EINJ 000000007a6493d0 00130 (v01 ALASKA   A M I  00000001 INTL 00000001)
ACPI: UEFI 000000007a637488 00042 (v01                 00000000      00000000)
ACPI: BDAT 000000007a6374d0 00030 (v01 ALASKA   A M I  00000000 INTL 20091013)
ACPI: HPET 000000007a637500 00038 (v01 ALASKA   A M I  00000001 INTL 20091013)
ACPI: MSCT 000000007a637538 00090 (v01 ALASKA   A M I  00000001 INTL 20091013)
ACPI: PMCT 000000007a6375c8 00064 (v01 ALASKA   A M I  00000000 INTL 20091013)
ACPI: SLIT 000000007a637630 0002D (v01 ALASKA   A M I  00000001 INTL 20091013)
ACPI: SRAT 000000007a637660 00E58 (v03 ALASKA   A M I  00000001 INTL 20091013)
ACPI: WDDT 000000007a6384b8 00040 (v01 ALASKA   A M I  00000000 INTL 20091013)
ACPI: SSDT 000000007a6384f8 0EDE7 (v01 ALASKA    PmMgt 00000001 INTL 20120913)
ACPI: SSDT 000000007a6472e0 01BAD (v02 ALASKA SpsNm    00000002 INTL 20120913)
ACPI: SSDT 000000007a648e90 00064 (v02 ALASKA SpsNvs   00000002 INTL 20120913)
ACPI: PRAD 000000007a648ef8 00102 (v02 ALASKA   A M I  00000002 INTL 20120913)
ACPI: DMAR 000000007a649000 000C4 (v01 ALASKA   A M I  00000001 INTL 20091013)
ACPI: HEST 000000007a6490c8 000A8 (v01 ALASKA   A M I  00000001 INTL 00000001)
ACPI: BERT 000000007a649170 00030 (v01 ALASKA   A M I  00000001 INTL 00000001)
ACPI: ERST 000000007a6491a0 00230 (v01 ALASKA   A M I  00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x0a -> Node 0
SRAT: PXM 0 -> APIC 0x0c -> Node 0
SRAT: PXM 0 -> APIC 0x0e -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x0b -> Node 0
SRAT: PXM 0 -> APIC 0x0d -> Node 0
SRAT: PXM 0 -> APIC 0x0f -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x87fffffff]
NUMA: Initialized distance table, cnt=1
NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x87fffffff] -> [mem 0x00000000-0x87fffffff]
Initmem setup node 0 [mem 0x00000000-0x87fffffff]
  NODE_DATA [mem 0x87ffd6000-0x87fffcfff]
 [ffffea0000000000-ffffea0021ffffff] PMD -> [ffff88085f600000-ffff88087f5fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x87fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x00098fff]
  node   0: [mem 0x00100000-0x7a03dfff]
  node   0: [mem 0x7dd5b000-0x7dd5bfff]
  node   0: [mem 0x7dde2000-0x7dffffff]
  node   0: [mem 0x100000000-0x87fffffff]
On node 0 totalpages: 8364533
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3992 pages, LIFO batch:0
  DMA32 zone: 7754 pages used for memmap
  DMA32 zone: 496221 pages, LIFO batch:31
  Normal zone: 122880 pages used for memmap
  Normal zone: 7864320 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: [mem 0x00099000-0x00099fff]
PM: Registered nosave memory: [mem 0x0009a000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x7a03e000-0x7a600fff]
PM: Registered nosave memory: [mem 0x7a601000-0x7a649fff]
PM: Registered nosave memory: [mem 0x7a64a000-0x7bf8ffff]
PM: Registered nosave memory: [mem 0x7bf90000-0x7dd5afff]
PM: Registered nosave memory: [mem 0x7dd5c000-0x7dde1fff]
PM: Registered nosave memory: [mem 0x7e000000-0x7fffffff]
PM: Registered nosave memory: [mem 0x80000000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x90000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:5120 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88087fc00000 s86592 r8192 d24000 u131072
pcpu-alloc: s86592 r8192 d24000 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8233814
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Memory: 32667992k/35651584k available (6105k kernel code, 2193452k absent, 790140k reserved, 4065k data, 1584k init)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
	RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=16.
	Experimental no-CBs for all CPUs
	Experimental no-CBs CPUs: 0-15.
NR_IRQS:327936 nr_irqs:1216 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2593.793 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.58 BogoMIPS (lpj=2593793)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 4096
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 23383 entries in 92 pages
dmar: Host address width 46
dmar: DRHD base: 0x000000fbffc000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020df
dmar: RMRR base: 0x0000007dbd3000 end: 0x0000007dbe1fff
dmar: ATSR flags: 0x0
dmar: RHSA base: 0x000000fbffc000 proximity domain: 0x0
IOAPIC id 8 under DRHD base  0xfbffc000 IOMMU 0
IOAPIC id 9 under DRHD base  0xfbffc000 IOMMU 0
HPET id 0 under DRHD base 0xfbffc000
Your BIOS is broken and requested that x2apic be disabled.
This will slightly decrease performance.
Use 'intremap=no_x2apic_optout' to override BIOS request.
Enabled IRQ remapping in xapic mode
x2apic not enabled, IRQ remapping is in xapic mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2640 v3 @ 2.60GHz (fam: 06, model: 3f, stepping: 02)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node   0, Processors  #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 OK
Brought up 16 CPUs
smpboot: Total of 16 processors activated (83001.37 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x7a64a000-0x7bf8ffff] (26501120 bytes)
atomic64 test passed for x86-64 platform with CX8 and with SSE
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: PRAD           (null) 00102 (v02 ALASKA   A M I  00000002 INTL 20120913)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130517/hwxface-571)
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100
pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:2fe4] type 00 class 0x088000
pci 0000:ff:0c.5: [8086:2fe5] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:2fe6] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:2fe7] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100
pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000
pci 0000:ff:13.4: [8086:2fac] type 00 class 0x088000
pci 0000:ff:13.5: [8086:2fad] type 00 class 0x088000
pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000
pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000
pci 0000:ff:15.0: [8086:2fb4] type 00 class 0x088000
pci 0000:ff:15.1: [8086:2fb5] type 00 class 0x088000
pci 0000:ff:15.2: [8086:2fb6] type 00 class 0x088000
pci 0000:ff:15.3: [8086:2fb7] type 00 class 0x088000
pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000
pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000
pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000
pci 0000:ff:1e.3: reg 0x10: [mem 0x00000010-0x0000001f pref]
pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io  0x0000-0x03af]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff]
pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:2f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:2f04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:03.2: [8086:2f0a] type 01 class 0x060400
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:2f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfa518000-0xfa518fff]
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601
pci 0000:00:11.4: reg 0x10: [io  0xf110-0xf117]
pci 0000:00:11.4: reg 0x14: [io  0xf100-0xf103]
pci 0000:00:11.4: reg 0x18: [io  0xf0f0-0xf0f7]
pci 0000:00:11.4: reg 0x1c: [io  0xf0e0-0xf0e3]
pci 0000:00:11.4: reg 0x20: [io  0xf020-0xf03f]
pci 0000:00:11.4: reg 0x24: [mem 0xfa517000-0xfa5177ff]
pci 0000:00:11.4: PME# supported from D3hot
pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfa500000-0xfa50ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfa516000-0xfa51600f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: [8086:8d3b] type 00 class 0x078000
pci 0000:00:16.1: reg 0x10: [mem 0xfa515000-0xfa51500f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfa513000-0xfa5133ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:8d18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:8d1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:8d1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfa512000-0xfa5123ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8d44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io  0xf000-0xf01f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfa511000-0xfa5117ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfa510000-0xfa5100ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0x0580-0x059f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [1000:0072] type 00 class 0x010700
pci 0000:04:00.0: reg 0x10: [io  0xe000-0xe0ff]
pci 0000:04:00.0: reg 0x14: [mem 0xfa4c0000-0xfa4c3fff 64bit]
pci 0000:04:00.0: reg 0x1c: [mem 0xfa480000-0xfa4bffff 64bit]
pci 0000:04:00.0: reg 0x30: [mem 0xfa400000-0xfa47ffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: reg 0x174: [mem 0x00000000-0x00003fff 64bit]
pci 0000:04:00.0: reg 0x17c: [mem 0x00000000-0x0003ffff 64bit]
pci 0000:00:03.2: PCI bridge to [bus 04]
pci 0000:00:03.2:   bridge window [io  0xe000-0xefff]
pci 0000:00:03.2:   bridge window [mem 0xfa400000-0xfa4fffff]
pci 0000:05:00.0: [1000:0072] type 00 class 0x010700
pci 0000:05:00.0: reg 0x10: [io  0xd000-0xd0ff]
pci 0000:05:00.0: reg 0x14: [mem 0xfa3c0000-0xfa3c3fff 64bit]
pci 0000:05:00.0: reg 0x1c: [mem 0xfa380000-0xfa3bffff 64bit]
pci 0000:05:00.0: reg 0x30: [mem 0xfa300000-0xfa37ffff pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: reg 0x174: [mem 0x00000000-0x00003fff 64bit]
pci 0000:05:00.0: reg 0x17c: [mem 0x00000000-0x0003ffff 64bit]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.0:   bridge window [mem 0xfa300000-0xfa3fffff]
pci 0000:06:00.0: [8086:1533] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [mem 0xfa200000-0xfa27ffff]
pci 0000:06:00.0: reg 0x18: [io  0xc000-0xc01f]
pci 0000:06:00.0: reg 0x1c: [mem 0xfa280000-0xfa283fff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.4:   bridge window [mem 0xfa200000-0xfa2fffff]
pci 0000:07:00.0: [8086:1533] type 00 class 0x020000
pci 0000:07:00.0: reg 0x10: [mem 0xfa100000-0xfa17ffff]
pci 0000:07:00.0: reg 0x18: [io  0xb000-0xb01f]
pci 0000:07:00.0: reg 0x1c: [mem 0xfa180000-0xfa183fff]
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 07]
pci 0000:00:1c.5:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.5:   bridge window [mem 0xfa100000-0xfa1fffff]
pci 0000:08:00.0: [1a03:1150] type 01 class 0x060400
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 08-09]
pci 0000:00:1c.7:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.7:   bridge window [mem 0xf8000000-0xfa0fffff]
pci 0000:09:00.0: [1a03:2000] type 00 class 0x030000
pci 0000:09:00.0: reg 0x10: [mem 0xf8000000-0xf9ffffff]
pci 0000:09:00.0: reg 0x14: [mem 0xfa000000-0xfa01ffff]
pci 0000:09:00.0: reg 0x18: [io  0xa000-0xa07f]
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:00.0: PCI bridge to [bus 09]
pci 0000:08:00.0:   bridge window [io  0xa000-0xafff]
pci 0000:08:00.0:   bridge window [mem 0xf8000000-0xfa0fffff]
pci_bus 0000:00: on NUMA node 0 (pxm 0)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 *7 9 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: Enabled 1 GPEs in block 00 to 3F
ACPI: \_SB_.UNC0: notify handler is installed
ACPI: \_SB_.PCI0: notify handler is installed
Found 2 acpi root devices
vgaarb: device added: PCI:0000:09:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:09:00.0
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:ff:1e.3: no compatible bridge window for [mem 0x00000010-0x0000001f pref]
e820: reserve RAM buffer [mem 0x00099800-0x0009ffff]
e820: reserve RAM buffer [mem 0x7a03e000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7dd5c000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7e000000-0x7fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:06: [io  0x0500-0x057f] has been reserved
system 00:06: [io  0x0400-0x047f] could not be reserved
system 00:06: [io  0x0580-0x059f] has been reserved
system 00:06: [io  0x0600-0x061f] has been reserved
system 00:06: [io  0x0880-0x0883] has been reserved
system 00:06: [io  0x0800-0x081f] has been reserved
system 00:06: [mem 0xfed1c000-0xfed3ffff] could not be reserved
system 00:06: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:06: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:06: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:06: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io  0x0290-0x029f] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [dma 0 disabled]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: [dma 0 disabled]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 10 devices
ACPI: bus type PNP unregistered
pci 0000:ff:1e.3: BAR 0: can't assign mem pref (size 0x10)
pci 0000:ff:1e.3: BAR 0: trying firmware assignment [mem 0x00000010-0x0000001f pref]
pci 0000:ff:1e.3: BAR 0: [mem 0x00000010-0x0000001f pref] conflicts with reserved [mem 0x00000000-0x00000fff]
pci_bus 0000:ff: Some PCI device resources are unassigned, try booting with pci=realloc
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:04:00.0: reg 0x174: [mem 0x00000000-0x00003fff 64bit]
pci 0000:04:00.0: reg 0x17c: [mem 0x00000000-0x0003ffff 64bit]
pci 0000:04:00.0: reg 0x174: [mem 0x00000000-0x00003fff 64bit]
pci 0000:04:00.0: reg 0x17c: [mem 0x00000000-0x0003ffff 64bit]
pci 0000:04:00.0: BAR 9: can't assign mem (size 0x400000)
pci 0000:04:00.0: reg 0x174: [mem 0x00000000-0x00003fff 64bit]
pci 0000:04:00.0: BAR 7: can't assign mem (size 0x40000)
pci 0000:00:03.2: PCI bridge to [bus 04]
pci 0000:00:03.2:   bridge window [io  0xe000-0xefff]
pci 0000:00:03.2:   bridge window [mem 0xfa400000-0xfa4fffff]
pci 0000:05:00.0: reg 0x174: [mem 0x00000000-0x00003fff 64bit]
pci 0000:05:00.0: reg 0x17c: [mem 0x00000000-0x0003ffff 64bit]
pci 0000:05:00.0: reg 0x174: [mem 0x00000000-0x00003fff 64bit]
pci 0000:05:00.0: reg 0x17c: [mem 0x00000000-0x0003ffff 64bit]
pci 0000:05:00.0: BAR 9: can't assign mem (size 0x400000)
pci 0000:05:00.0: reg 0x174: [mem 0x00000000-0x00003fff 64bit]
pci 0000:05:00.0: BAR 7: can't assign mem (size 0x40000)
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.0:   bridge window [mem 0xfa300000-0xfa3fffff]
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.4:   bridge window [mem 0xfa200000-0xfa2fffff]
pci 0000:00:1c.5: PCI bridge to [bus 07]
pci 0000:00:1c.5:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.5:   bridge window [mem 0xfa100000-0xfa1fffff]
pci 0000:08:00.0: PCI bridge to [bus 09]
pci 0000:08:00.0:   bridge window [io  0xa000-0xafff]
pci 0000:08:00.0:   bridge window [mem 0xf8000000-0xfa0fffff]
pci 0000:00:1c.7: PCI bridge to [bus 08-09]
pci 0000:00:1c.7:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.7:   bridge window [mem 0xf8000000-0xfa0fffff]
pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc
pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io  0x1000-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x90000000-0xfbffbfff]
pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xfa400000-0xfa4fffff]
pci_bus 0000:05: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xfa300000-0xfa3fffff]
pci_bus 0000:06: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:06: resource 1 [mem 0xfa200000-0xfa2fffff]
pci_bus 0000:07: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:07: resource 1 [mem 0xfa100000-0xfa1fffff]
pci_bus 0000:08: resource 0 [io  0xa000-0xafff]
pci_bus 0000:08: resource 1 [mem 0xf8000000-0xfa0fffff]
pci_bus 0000:09: resource 0 [io  0xa000-0xafff]
pci_bus 0000:09: resource 1 [mem 0xf8000000-0xfa0fffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:09:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 17064k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x7603e000-0x7a03e000] (64MB) mapped at [ffff88007603e000-ffff88007a03dfff]
microcode: CPU0 sig=0x306f2, pf=0x1, revision=0x2d
microcode: CPU1 sig=0x306f2, pf=0x1, revision=0x2d
microcode: CPU2 sig=0x306f2, pf=0x1, revision=0x2d
microcode: CPU3 sig=0x306f2, pf=0x1, revision=0x2d
microcode: CPU4 sig=0x306f2, pf=0x1, revision=0x2d
microcode: CPU5 sig=0x306f2, pf=0x1, revision=0x2d
microcode: CPU6 sig=0x306f2, pf=0x1, revision=0x2d
microcode: CPU7 sig=0x306f2, pf=0x1, revision=0x2d
microcode: CPU8 sig=0x306f2, pf=0x1, revision=0x2d
microcode: CPU9 sig=0x306f2, pf=0x1, revision=0x2d
microcode: CPU10 sig=0x306f2, pf=0x1, revision=0x2d
microcode: CPU11 sig=0x306f2, pf=0x1, revision=0x2d
microcode: CPU12 sig=0x306f2, pf=0x1, revision=0x2d
microcode: CPU13 sig=0x306f2, pf=0x1, revision=0x2d
microcode: CPU14 sig=0x306f2, pf=0x1, revision=0x2d
microcode: CPU15 sig=0x306f2, pf=0x1, revision=0x2d
microcode: Microcode Update Driver: v2.00 , Peter Oruba
futex hash table entries: 4096 (order: 6, 262144 bytes)
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1451052687.602:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
Key type big_key registered
SELinux:  Registering netfilter hooks
alg: No test for stdrng (krng)
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 65 for MSI/MSI-X
pcieport 0000:00:02.0: irq 66 for MSI/MSI-X
pcieport 0000:00:03.0: irq 67 for MSI/MSI-X
pcieport 0000:00:03.2: irq 68 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 69 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 70 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 71 for MSI/MSI-X
pcieport 0000:00:1c.7: irq 72 for MSI/MSI-X
aer 0000:00:01.0:pcie02: service driver aer loaded
aer 0000:00:02.0:pcie02: service driver aer loaded
aer 0000:00:03.0:pcie02: service driver aer loaded
aer 0000:00:03.2:pcie02: service driver aer loaded
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.2: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
ioapic: probe of 0000:00:05.4 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4 model 0x3F
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 19, io mem 0xfa513000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.0-123.el7.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0xfa512000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.10.0-123.el7.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.10.0-123.el7.x86_64 xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.10.0-123.el7.x86_64 xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Intel P-state driver initializing.
Intel pstate controlling: cpu 0
Intel pstate controlling: cpu 1
Intel pstate controlling: cpu 2
Intel pstate controlling: cpu 3
Intel pstate controlling: cpu 4
Intel pstate controlling: cpu 5
Intel pstate controlling: cpu 6
Intel pstate controlling: cpu 7
Intel pstate controlling: cpu 8
Intel pstate controlling: cpu 9
Intel pstate controlling: cpu 10
Intel pstate controlling: cpu 11
Intel pstate controlling: cpu 12
Intel pstate controlling: cpu 13
Intel pstate controlling: cpu 14
Intel pstate controlling: cpu 15
cpuidle: using governor menu
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
Loaded X.509 cert 'CentOS Linux kernel signing key: bc83d0fe70c62fab1c58b4ebaa95e3936128fcf4'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
IMA: No TPM chip found, activating TPM-bypass!
rtc_cmos 00:02: setting system clock to 2015-12-25 14:11:28 UTC (1451052688)
Freeing unused kernel memory: 1584k freed
systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Starting -.slice.
systemd[1]: Created slice -.slice.
systemd[1]: Starting System Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Slices.
systemd[1]: Reached target Slices.
systemd[1]: Starting Timers.
systemd[1]: Reached target Timers.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd-journald[190]: Vacuuming done, freed 0 bytes
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
systemd-udevd[342]: starting version 208
ACPI: bus type ATA registered
libata version 3.00 loaded.
dca service started, version 1.12.1
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
mpt2sas version 16.100.00.00 loaded
scsi0 : Fusion MPT SAS Host
ahci 0000:00:11.4: version 3.0
ahci 0000:00:11.4: irq 73 for MSI/MSI-X
ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.4: flags: 64bit ncq pm led clo pio slum part ems apst 
mpt2sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (32686664 kB)
mpt2sas 0000:04:00.0: irq 74 for MSI/MSI-X
mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 74
mpt2sas0: iomem(0x00000000fa4c0000), mapped(0xffffc900134d0000), size(16384)
mpt2sas0: ioport(0x000000000000e000), size(256)
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
igb: Copyright (c) 2007-2013 Intel Corporation.
igb 0000:06:00.0: irq 75 for MSI/MSI-X
igb 0000:06:00.0: irq 76 for MSI/MSI-X
igb 0000:06:00.0: irq 77 for MSI/MSI-X
igb 0000:06:00.0: irq 78 for MSI/MSI-X
igb 0000:06:00.0: irq 79 for MSI/MSI-X
[drm] Initialized drm 1.1.0 20060810
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfa517000 port 0xfa517100 irq 73
ata2: SATA max UDMA/133 abar m2048@0xfa517000 port 0xfa517180 irq 73
ata3: SATA max UDMA/133 abar m2048@0xfa517000 port 0xfa517200 irq 73
ata4: SATA max UDMA/133 abar m2048@0xfa517000 port 0xfa517280 irq 73
ahci 0000:00:1f.2: irq 80 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[drm] AST 2300 detected
[drm] dram 1632000000 6 32 02000000
[TTM] Zone  kernel: Available graphics memory: 16343332 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
fbcon: astdrmfb (fb0) is primary device
scsi9 : ahci
scsi10 : ahci
ata5: SATA max UDMA/133 abar m2048@0xfa511000 port 0xfa511100 irq 80
ata6: SATA max UDMA/133 abar m2048@0xfa511000 port 0xfa511180 irq 80
ata7: SATA max UDMA/133 abar m2048@0xfa511000 port 0xfa511200 irq 80
ata8: SATA max UDMA/133 abar m2048@0xfa511000 port 0xfa511280 irq 80
ata9: SATA max UDMA/133 abar m2048@0xfa511000 port 0xfa511300 irq 80
ata10: SATA max UDMA/133 abar m2048@0xfa511000 port 0xfa511380 irq 80
Console: switching to colour frame buffer device 128x48
igb 0000:06:00.0: added PHC on eth0
igb 0000:06:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:06:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 14:dd:a9:d5:9b:81
igb 0000:06:00.0: eth0: PBA No: 001300-000
igb 0000:06:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
usb 1-1: new high-speed USB device number 2 using ehci-pci
ast 0000:09:00.0: fb0: astdrmfb frame buffer device
ast 0000:09:00.0: registered panic notifier
[drm] Initialized ast 0.1.0 20120228 for 0000:09:00.0 on minor 0
igb 0000:07:00.0: irq 81 for MSI/MSI-X
igb 0000:07:00.0: irq 82 for MSI/MSI-X
igb 0000:07:00.0: irq 83 for MSI/MSI-X
igb 0000:07:00.0: irq 84 for MSI/MSI-X
igb 0000:07:00.0: irq 85 for MSI/MSI-X
igb 0000:07:00.0: added PHC on eth1
igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:07:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 14:dd:a9:d5:9b:82
igb 0000:07:00.0: eth1: PBA No: 001300-000
igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
systemd-udevd[345]: renamed network interface eth1 to enp7s0
mpt2sas0: sending diag reset !!
systemd-udevd[348]: renamed network interface eth0 to enp6s0
usb 1-1: New USB device found, idVendor=8087, idProduct=800a
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
pcieport 0000:00:03.2: AER: Multiple Corrected error received: id=001a
pcieport 0000:00:03.2: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=001a(Receiver ID)
pcieport 0000:00:03.2:   device [8086:2f0a] error status/mask=00000001/00002000
pcieport 0000:00:03.2:    [ 0] Receiver Error         (First)
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: ATA-9: INTEL SSDSC2BB240G6, G2010130, max UDMA/133
ata5.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata6.00: ATA-9: INTEL SSDSC2BB240G6, G2010130, max UDMA/133
ata6.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/133
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access     ATA      INTEL SSDSC2BB24 G201 PQ: 0 ANSI: 5
scsi 6:0:0:0: Direct-Access     ATA      INTEL SSDSC2BB24 G201 PQ: 0 ANSI: 5
sd 5:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
sd 5:0:0:0: [sda] 4096-byte physical blocks
sd 5:0:0:0: [sda] Write Protect is off
sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 6:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/223 GiB)
sd 6:0:0:0: [sdb] 4096-byte physical blocks
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
 sdb: unknown partition table
sd 5:0:0:0: [sda] Attached SCSI disk
sd 6:0:0:0: [sdb] Attached SCSI disk
usb 2-1: New USB device found, idVendor=8087, idProduct=8002
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 3-1: new low-speed USB device number 2 using xhci_hcd
usb 3-1: New USB device found, idVendor=258a, idProduct=0001
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB KEYBOARD
usb 3-1: Manufacturer: SINO WEALTH
usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: SINO WEALTH USB KEYBOARD as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/input/input2
hid-generic 0003:258A:0001.0001: input,hidraw0: USB HID v1.10 Keyboard [SINO WEALTH USB KEYBOARD] on usb-0000:00:14.0-1/input0
input: SINO WEALTH USB KEYBOARD as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/input/input3
hid-generic 0003:258A:0001.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [SINO WEALTH USB KEYBOARD] on usb-0000:00:14.0-1/input1
tsc: Refined TSC clocksource calibration: 2593.993 MHz
Switching to clocksource tsc
usb 3-2: new high-speed USB device number 3 using xhci_hcd
usb 3-2: New USB device found, idVendor=0e8d, idProduct=1887
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: Portable Super Multi Drive
usb 3-2: Manufacturer: Hitachi-LG Data Storage Inc
usb 3-2: SerialNumber: KX3Z91K4449         
usb-storage 3-2:1.0: USB Mass Storage device detected
scsi11 : usb-storage 3-2:1.0
usbcore: registered new interface driver usb-storage
usb 3-13: new low-speed USB device number 4 using xhci_hcd
usb 3-13: New USB device found, idVendor=1c4f, idProduct=0048
usb 3-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-13: Product: Usb Mouse
usb 3-13: Manufacturer: SIGMACHIP
usb 3-13: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13:1.0/input/input4
hid-generic 0003:1C4F:0048.0003: input,hidraw2: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:14.0-13/input0
mpt2sas0: diag reset: SUCCESS
mpt2sas0: Allocated physical memory: size(3316 kB)
mpt2sas0: Current Controller Queue Depth(1451), Max Controller Queue Depth(1672)
mpt2sas0: Scatter Gather Elements per IO(128)
mpt2sas0: LSISAS2008: FWVersion(15.00.00.00), ChipRevision(0x03), BiosVersion(07.29.00.00)
mpt2sas0: Protocol=(Initiator), Capabilities=(Raid,TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)
mpt2sas0: sending port enable !!
scsi12 : Fusion MPT SAS Host
mpt2sas1: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (32686664 kB)
mpt2sas 0000:05:00.0: irq 86 for MSI/MSI-X
mpt2sas1-msix0: PCI-MSI-X enabled: IRQ 86
mpt2sas1: iomem(0x00000000fa3c0000), mapped(0xffffc90013538000), size(16384)
mpt2sas1: ioport(0x000000000000d000), size(256)
mpt2sas1: sending diag reset !!
scsi 11:0:0:0: CD-ROM            Lenovo   Slim_USB_Burner  LA01 PQ: 0 ANSI: 0
mpt2sas1: diag reset: SUCCESS
mpt2sas1: Allocated physical memory: size(3316 kB)
mpt2sas1: Current Controller Queue Depth(1451), Max Controller Queue Depth(1672)
mpt2sas1: Scatter Gather Elements per IO(128)
mpt2sas1: LSISAS2008: FWVersion(15.00.00.00), ChipRevision(0x03), BiosVersion(07.29.00.00)
mpt2sas1: Protocol=(Initiator), Capabilities=(Raid,TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)
mpt2sas1: sending port enable !!
bio: create slab  at 1
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
XFS (sda3): Mounting Filesystem
XFS (sda3): Ending clean mount
mpt2sas0: host_add: handle(0x0001), sas_addr(0x5000ea65800aea00), phys(8)
systemd-journald[190]: Received SIGTERM
systemd-cgroups-agent[618]: Failed to get D-Bus connection: Failed to connect to socket /run/systemd/private: No such file or directory
type=1404 audit(1451052691.661:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 106409 rules.
SELinux: 2048 avtab hash slots, 106409 rules.
SELinux:  8 users, 86 roles, 4801 types, 280 bools, 1 sens, 1024 cats
SELinux:  83 classes, 106409 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev aio, type aio), not configured for labeling
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
SELinux: initialized (dev sda3, type xfs), uses xattr
type=1403 audit(1451052691.833:3): policy loaded auid=4294967295 ses=4294967295
systemd[1]: Successfully loaded SELinux policy in 177.099ms.
systemd[1]: Relabelled /dev and /run in 20.499ms.
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
systemd-journald[662]: Vacuuming done, freed 0 bytes
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
systemd-udevd[701]: starting version 208
wmi: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000428-0x000000000000042f (\GPE0) (20130517/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x000000000000052c-0x000000000000052d (\GPIV) (20130517/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
mei_me 0000:00:16.0: Device doesn't have valid ME Interface
mei_me 0000:00:16.0: initialization failed.
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
input: PC Speaker as /devices/platform/pcspkr/input/input5
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
alg: No test for crc32 (crc32-pclmul)
XFS (sda1): Mounting Filesystem
XFS (sda1): Ending clean mount
SELinux: initialized (dev sda1, type xfs), uses xattr
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
Adding 20479996k swap on /dev/mapper/centos-swap.  Priority:-1 extents:1 across:20479996k SSFS
systemd-journald[662]: Received request to flush runtime journal from PID 1
type=1305 audit(1451052692.367:4): audit_pid=1069 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
sd 5:0:0:0: Attached scsi generic sg0 type 0
sd 6:0:0:0: Attached scsi generic sg1 type 0
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
Bridge firewalling registered
mpt2sas1: host_add: handle(0x0001), sas_addr(0x5000ea656006fe00), phys(8)
IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
mpt2sas0: port enable: SUCCESS
scsi 0:0:0:0: Direct-Access     HITACHI  HUC109030CSS600  A440 PQ: 0 ANSI: 6
scsi 0:0:0:0: SSP: handle(0x000a), sas_addr(0x5000cca06e11559d), phy(1), device_name(0x5000cca06e11559f)
scsi 0:0:0:0: SSP: enclosure_logical_id(0x5000ea65800aea00), slot(1)
scsi 0:0:0:0: qdepth(254), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
scsi 0:0:1:0: Direct-Access     ATA      INTEL SSDSC2BB24 0130 PQ: 0 ANSI: 6
scsi 0:0:1:0: SATA: handle(0x0009), sas_addr(0x4433221100000000), phy(0), device_name(0x55cd2e404c0ea7ad)
scsi 0:0:1:0: SATA: enclosure_logical_id(0x5000ea65800aea00), slot(0)
scsi 0:0:1:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:1:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
scsi 0:0:2:0: Direct-Access     HGST     HUS724020ALS640  A1CD PQ: 0 ANSI: 6
scsi 0:0:2:0: SSP: handle(0x000b), sas_addr(0x5000cca028c65eed), phy(2), device_name(0x5000cca028c65eef)
scsi 0:0:2:0: SSP: enclosure_logical_id(0x5000ea65800aea00), slot(2)
scsi 0:0:2:0: qdepth(254), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
scsi 0:0:3:0: Direct-Access     HGST     HUS724020ALS640  A1CD PQ: 0 ANSI: 6
scsi 0:0:3:0: SSP: handle(0x000c), sas_addr(0x5000cca028c6dd65), phy(3), device_name(0x5000cca028c6dd67)
scsi 0:0:3:0: SSP: enclosure_logical_id(0x5000ea65800aea00), slot(3)
scsi 0:0:3:0: qdepth(254), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
sd 0:0:0:0: Attached scsi generic sg2 type 0
sd 0:0:0:0: [sdc] 585937500 512-byte logical blocks: (300 GB/279 GiB)
sd 0:0:1:0: Attached scsi generic sg3 type 0
sd 0:0:2:0: Attached scsi generic sg4 type 0
sd 0:0:1:0: [sdd] 468862128 512-byte logical blocks: (240 GB/223 GiB)
sd 0:0:1:0: [sdd] 4096-byte physical blocks
sd 0:0:2:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sdc] Write Protect is off
sd 0:0:0:0: [sdc] Mode Sense: f7 00 10 08
sd 0:0:3:0: Attached scsi generic sg5 type 0
sd 0:0:3:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
scsi 11:0:0:0: Attached scsi generic sg6 type 5
sd 0:0:3:0: [sdf] Write Protect is off
sd 0:0:3:0: [sdf] Mode Sense: f7 00 10 08
sd 0:0:2:0: [sde] Write Protect is off
sd 0:0:2:0: [sde] Mode Sense: f7 00 10 08
sd 0:0:3:0: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:2:0: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:1:0: [sdd] Write Protect is off
sd 0:0:1:0: [sdd] Mode Sense: 7f 00 10 08
sd 0:0:1:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
 sdc: unknown partition table
 sdd: unknown partition table
sd 0:0:0:0: [sdc] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/62x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 11:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:1:0: [sdd] Attached SCSI disk
 sde: unknown partition table
 sdf: unknown partition table
sd 0:0:2:0: [sde] Attached SCSI disk
sd 0:0:3:0: [sdf] Attached SCSI disk
mpt2sas1: port enable: SUCCESS
scsi 12:0:0:0: Direct-Access     HGST     HUS724020ALS640  A1CD PQ: 0 ANSI: 6
scsi 12:0:0:0: SSP: handle(0x0009), sas_addr(0x5000cca028c661e1), phy(0), device_name(0x5000cca028c661e3)
scsi 12:0:0:0: SSP: enclosure_logical_id(0x5000ea656006fe00), slot(0)
scsi 12:0:0:0: qdepth(254), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
scsi 12:0:1:0: Direct-Access     HGST     HUS724020ALS640  A1CD PQ: 0 ANSI: 6
scsi 12:0:1:0: SSP: handle(0x000a), sas_addr(0x5000cca028c80b9d), phy(1), device_name(0x5000cca028c80b9f)
scsi 12:0:1:0: SSP: enclosure_logical_id(0x5000ea656006fe00), slot(1)
scsi 12:0:1:0: qdepth(254), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
scsi 12:0:2:0: Direct-Access     HGST     HUS724020ALS640  A1CD PQ: 0 ANSI: 6
scsi 12:0:2:0: SSP: handle(0x000b), sas_addr(0x5000cca028c6de31), phy(2), device_name(0x5000cca028c6de33)
scsi 12:0:2:0: SSP: enclosure_logical_id(0x5000ea656006fe00), slot(2)
scsi 12:0:2:0: qdepth(254), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
scsi 12:0:3:0: Direct-Access     HGST     HUS724020ALS640  A1CD PQ: 0 ANSI: 6
scsi 12:0:3:0: SSP: handle(0x000c), sas_addr(0x5000cca028c65c01), phy(4), device_name(0x5000cca028c65c03)
scsi 12:0:3:0: SSP: enclosure_logical_id(0x5000ea656006fe00), slot(4)
scsi 12:0:3:0: qdepth(254), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
scsi 12:0:4:0: Direct-Access     HGST     HUS724020ALS640  A1CD PQ: 0 ANSI: 6
scsi 12:0:4:0: SSP: handle(0x000d), sas_addr(0x5000cca028c6ccc5), phy(5), device_name(0x5000cca028c6ccc7)
scsi 12:0:4:0: SSP: enclosure_logical_id(0x5000ea656006fe00), slot(5)
scsi 12:0:4:0: qdepth(254), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
scsi 12:0:5:0: Direct-Access     HGST     HUS724020ALS640  A1CD PQ: 0 ANSI: 6
scsi 12:0:5:0: SSP: handle(0x000e), sas_addr(0x5000cca028c8094d), phy(6), device_name(0x5000cca028c8094f)
scsi 12:0:5:0: SSP: enclosure_logical_id(0x5000ea656006fe00), slot(6)
scsi 12:0:5:0: qdepth(254), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
scsi 12:0:6:0: Direct-Access     HGST     HUS724020ALS640  A1CD PQ: 0 ANSI: 6
scsi 12:0:6:0: SSP: handle(0x000f), sas_addr(0x5000cca028be12d1), phy(7), device_name(0x5000cca028be12d3)
scsi 12:0:6:0: SSP: enclosure_logical_id(0x5000ea656006fe00), slot(7)
scsi 12:0:6:0: qdepth(254), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
sd 12:0:0:0: Attached scsi generic sg7 type 0
sd 12:0:1:0: Attached scsi generic sg8 type 0
sd 12:0:0:0: [sdg] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 12:0:1:0: [sdh] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 12:0:2:0: Attached scsi generic sg9 type 0
sd 12:0:2:0: [sdi] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 12:0:3:0: Attached scsi generic sg10 type 0
sd 12:0:3:0: [sdj] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 12:0:0:0: [sdg] Write Protect is off
sd 12:0:0:0: [sdg] Mode Sense: f7 00 10 08
sd 12:0:1:0: [sdh] Write Protect is off
sd 12:0:1:0: [sdh] Mode Sense: f7 00 10 08
sd 12:0:4:0: [sdk] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 12:0:2:0: [sdi] Write Protect is off
sd 12:0:2:0: [sdi] Mode Sense: f7 00 10 08
sd 12:0:3:0: [sdj] Write Protect is off
sd 12:0:3:0: [sdj] Mode Sense: f7 00 10 08
sd 12:0:0:0: [sdg] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 12:0:1:0: [sdh] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 12:0:2:0: [sdi] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 12:0:4:0: [sdk] Write Protect is off
sd 12:0:4:0: [sdk] Mode Sense: f7 00 10 08
sd 12:0:4:0: Attached scsi generic sg11 type 0
sd 12:0:3:0: [sdj] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 12:0:4:0: [sdk] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 12:0:5:0: Attached scsi generic sg12 type 0
sd 12:0:5:0: [sdl] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 12:0:6:0: Attached scsi generic sg13 type 0
sd 12:0:6:0: [sdm] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 12:0:5:0: [sdl] Write Protect is off
sd 12:0:5:0: [sdl] Mode Sense: f7 00 10 08
sd 12:0:5:0: [sdl] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 12:0:6:0: [sdm] Write Protect is off
sd 12:0:6:0: [sdm] Mode Sense: f7 00 10 08
sd 12:0:6:0: [sdm] Write cache: enabled, read cache: enabled, supports DPO and FUA
 sdg: unknown partition table
 sdh: unknown partition table
 sdi: unknown partition table
 sdj: unknown partition table
 sdk: unknown partition table
 sdl: unknown partition table
 sdm: unknown partition table
sd 12:0:0:0: [sdg] Attached SCSI disk
sd 12:0:2:0: [sdi] Attached SCSI disk
sd 12:0:1:0: [sdh] Attached SCSI disk
sd 12:0:3:0: [sdj] Attached SCSI disk
sd 12:0:4:0: [sdk] Attached SCSI disk
sd 12:0:5:0: [sdl] Attached SCSI disk
sd 12:0:6:0: [sdm] Attached SCSI disk
[drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 81
Raw EDID:
 	00 ff ff ff ff ff ff 00 05 e3 50 19 00 00 00 00
 	00 15 01 03 68 29 1a 78 2a ee d1 a5 55 49 ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 91
Raw EDID:
 	00 ff ff ff ff ff ff 00 05 e3 50 19 00 00 00 00
 	00 15 01 03 68 29 1a 78 2a ee d1 a5 55 48 9b 26
 	12 50 54 bf ef 00 95 00 81 80 81 c1 ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Raw EDID:
 	ff ff ff ff ff 00 05 e3 50 19 00 00 00 00 00 15
 	01 03 68 29 1a 78 2a ee d1 a5 55 48 9b 26 12 50
 	54 bf ef 00 95 00 81 80 81 c0 01 01 01 01 01 01
 	01 01 01 01 ab 22 a0 a0 51 ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 216
Raw EDID:
 	00 ff ff ff ff ff ff 00 05 e3 50 19 00 00 00 00
 	00 15 01 03 68 29 1a 78 2a ee d1 a5 55 48 9b 26
 	12 50 54 bf ef 00 95 00 81 80 81 c0 01 01 01 01
 	01 01 01 01 01 01 ab 22 a0 a0 50 84 1a 30 30 20
 	36 00 98 ff 10 00 01 ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ast 0000:09:00.0: VGA-1: EDID block 0 invalid.
usb 3-13: USB disconnect, device number 4
usb 3-13: new low-speed USB device number 5 using xhci_hcd
usb 3-13: New USB device found, idVendor=1c4f, idProduct=0048
usb 3-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-13: Product: Usb Mouse
usb 3-13: Manufacturer: SIGMACHIP
usb 3-13: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13:1.0/input/input6
hid-generic 0003:1C4F:0048.0004: input,hidraw2: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:14.0-13/input0
fuse init (API version 7.22)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
i2c i2c-0: sendbytes: NAK bailout.
i2c i2c-0: sendbytes: NAK bailout.
i2c i2c-0: sendbytes: NAK bailout.
i2c i2c-0: sendbytes: NAK bailout.
i2c i2c-0: sendbytes: NAK bailout.
i2c i2c-0: sendbytes: NAK bailout.
i2c i2c-0: sendbytes: NAK bailout.
i2c i2c-0: sendbytes: NAK bailout.
i2c i2c-0: sendbytes: NAK bailout.
usb 3-2: USB disconnect, device number 3
igb: enp7s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): enp7s0: link becomes ready
usb 3-13: USB disconnect, device number 5
usb 3-13: new low-speed USB device number 6 using xhci_hcd
usb 3-13: New USB device found, idVendor=1c4f, idProduct=0048
usb 3-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-13: Product: Usb Mouse
usb 3-13: Manufacturer: SIGMACHIP
usb 3-13: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13:1.0/input/input7
hid-generic 0003:1C4F:0048.0005: input,hidraw2: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:14.0-13/input0
usb 3-13: USB disconnect, device number 6
igb: enp7s0 NIC Link is Down
igb: enp7s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
igb: enp7s0 NIC Link is Down
igb: enp7s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
TCP: lp registered
usb 3-1: USB disconnect, device number 2
igb: enp7s0 NIC Link is Down
usb 3-1: new low-speed USB device number 7 using xhci_hcd
usb 3-1: New USB device found, idVendor=046d, idProduct=c31c
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB Keyboard
usb 3-1: Manufacturer: Logitech
usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-1: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/input/input8
hid-generic 0003:046D:C31C.0006: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-1/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/input/input9
hid-generic 0003:046D:C31C.0007: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-1/input1
igb: enp7s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
igb: enp7s0 NIC Link is Down
usb 3-1: USB disconnect, device number 7
igb: enp7s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
igb: enp7s0 NIC Link is Down
igb: enp7s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
traps: polkitd[1189] general protection ip:7f982c0c8cf2 sp:7ffff2ca1db0 error:0 in libmozjs-17.0.so[7f982bf8a000+3b3000]
Ebtables v2.0 unregistered
traps: polkitd[24620] general protection ip:7fcf95ae3cf2 sp:7fff6905d030 error:0 in libmozjs-17.0.so[7fcf959a5000+3b3000]
traps: polkitd[29736] general protection ip:7f3bd6d54cf2 sp:7fffeae15de0 error:0 in libmozjs-17.0.so[7f3bd6c16000+3b3000]
traps: polkitd[6066] general protection ip:7f4644d66cf2 sp:7fff8d6e2450 error:0 in libmozjs-17.0.so[7f4644c28000+3b3000]
traps: polkitd[14889] general protection ip:7fea0a5c6cf2 sp:7fff5d3abbb0 error:0 in libmozjs-17.0.so[7fea0a488000+3b3000]
traps: polkitd[24506] general protection ip:7f61e0bd5cf2 sp:7fff91998c40 error:0 in libmozjs-17.0.so[7f61e0a97000+3b3000]
traps: polkitd[2027] general protection ip:7fe0f1006cf2 sp:7fff9aa6add0 error:0 in libmozjs-17.0.so[7fe0f0ec8000+3b3000]
traps: polkitd[10676] general protection ip:7fd09d860cf2 sp:7fff3d609790 error:0 in libmozjs-17.0.so[7fd09d722000+3b3000]
traps: polkitd[19517] general protection ip:7f63f7634cf2 sp:7fff4f0dede0 error:0 in libmozjs-17.0.so[7f63f74f6000+3b3000]
traps: polkitd[28161] general protection ip:7fb3d695ccf2 sp:7fff9879f930 error:0 in libmozjs-17.0.so[7fb3d681e000+3b3000]
 sdb: sdb2
 sdc: sdc1
XFS (sdc1): Mounting Filesystem
XFS (sdc1): Ending clean mount
SELinux: initialized (dev sdc1, type xfs), uses xattr
 sdc: sdc1
XFS (sdc1): Mounting Filesystem
XFS (sdc1): Ending clean mount
SELinux: initialized (dev sdc1, type xfs), uses xattr
XFS (sdc1): Mounting Filesystem
XFS (sdc1): Ending clean mount
SELinux: initialized (dev sdc1, type xfs), uses xattr
XFS (sdc1): Mounting Filesystem
XFS (sdc1): Ending clean mount
SELinux: initialized (dev sdc1, type xfs), uses xattr
 sdb: sdb2 sdb3
XFS (sdc1): Mounting Filesystem
XFS (sdc1): Ending clean mount
SELinux: initialized (dev sdc1, type xfs), uses xattr
XFS (sdc1): Mounting Filesystem
XFS (sdc1): Ending clean mount
SELinux: initialized (dev sdc1, type xfs), uses xattr
XFS (sdc1): Mounting Filesystem
XFS (sdc1): Ending clean mount
SELinux: initialized (dev sdc1, type xfs), uses xattr
 sdb: sdb2 sdb3 sdb4
XFS (sdc1): Mounting Filesystem
XFS (sdc1): Ending clean mount
SELinux: initialized (dev sdc1, type xfs), uses xattr
XFS (sdb): Mounting Filesystem
XFS (sdb): Ending clean mount
SELinux: initialized (dev sdb, type xfs), uses xattr
traps: polkitd[10263] general protection ip:7f12ba303cf2 sp:7fff9a753220 error:0 in libmozjs-17.0.so[7f12ba1c5000+3b3000]
XFS (sdc1): Mounting Filesystem
XFS (sdc1): Ending clean mount
SELinux: initialized (dev sdc1, type xfs), uses xattr
 sdb: sdb2
traps: polkitd[13626] general protection ip:7fe0d04cacf2 sp:7ffff1ba21b0 error:0 in libmozjs-17.0.so[7fe0d038c000+3b3000]
 sdb: sdb2 sdb3
 sdc: sdc1
XFS (sdc1): Mounting Filesystem
XFS (sdc1): Ending clean mount
SELinux: initialized (dev sdc1, type xfs), uses xattr
 sdc: sdc1
XFS (sdc1): Mounting Filesystem
XFS (sdc1): Ending clean mount
SELinux: initialized (dev sdc1, type xfs), uses xattr
XFS (sdc1): Mounting Filesystem
XFS (sdc1): Ending clean mount
SELinux: initialized (dev sdc1, type xfs), uses xattr
XFS (sdc1): Mounting Filesystem
XFS (sdc1): Ending clean mount
SELinux: initialized (dev sdc1, type xfs), uses xattr
 sdb: sdb2 sdb3 sdb4
XFS (sdc1): Mounting Filesystem
XFS (sdc1): Ending clean mount
SELinux: initialized (dev sdc1, type xfs), uses xattr
 sdb: sdb2
 sdb: sdb1 sdb2
XFS (sdb1): Mounting Filesystem
XFS (sdb1): Ending clean mount
SELinux: initialized (dev sdb1, type xfs), uses xattr
 sdb: sdb1 sdb2
XFS (sdb1): Mounting Filesystem
XFS (sdb1): Ending clean mount
SELinux: initialized (dev sdb1, type xfs), uses xattr
 sdc: sdc2
 sdc: sdc1 sdc2
XFS (sdc1): Mounting Filesystem
XFS (sdc1): Ending clean mount
SELinux: initialized (dev sdc1, type xfs), uses xattr
 sdc: sdc1 sdc2
XFS (sdc1): Mounting Filesystem
XFS (sdc1): Ending clean mount
SELinux: initialized (dev sdc1, type xfs), uses xattr
 sdd: sdd2
 sdd: sdd1 sdd2
XFS (sdd1): Mounting Filesystem
XFS (sdd1): Ending clean mount
SELinux: initialized (dev sdd1, type xfs), uses xattr
 sdd: sdd1 sdd2
XFS (sdd1): Mounting Filesystem
XFS (sdd1): Ending clean mount
SELinux: initialized (dev sdd1, type xfs), uses xattr
 sde: sde2
 sde: sde1 sde2
XFS (sde1): Mounting Filesystem
XFS (sde1): Ending clean mount
SELinux: initialized (dev sde1, type xfs), uses xattr
 sde: sde1 sde2
XFS (sde1): Mounting Filesystem
XFS (sde1): Ending clean mount
SELinux: initialized (dev sde1, type xfs), uses xattr
 sdf: sdf2
 sdf: sdf1 sdf2
XFS (sdf1): Mounting Filesystem
XFS (sdf1): Ending clean mount
SELinux: initialized (dev sdf1, type xfs), uses xattr
 sdf: sdf1 sdf2
XFS (sdf1): Mounting Filesystem
XFS (sdf1): Ending clean mount
SELinux: initialized (dev sdf1, type xfs), uses xattr
 sdi: sdi2
 sdi: sdi1 sdi2
XFS (sdi1): Mounting Filesystem
XFS (sdi1): Ending clean mount
SELinux: initialized (dev sdi1, type xfs), uses xattr
 sdi: sdi1 sdi2
XFS (sdi1): Mounting Filesystem
XFS (sdi1): Ending clean mount
SELinux: initialized (dev sdi1, type xfs), uses xattr
 sdh: sdh2
 sdh: sdh1 sdh2
XFS (sdh1): Mounting Filesystem
XFS (sdh1): Ending clean mount
SELinux: initialized (dev sdh1, type xfs), uses xattr
 sdh: sdh1 sdh2
XFS (sdh1): Mounting Filesystem
XFS (sdh1): Ending clean mount
SELinux: initialized (dev sdh1, type xfs), uses xattr
 sdg: sdg2
 sdg: sdg1 sdg2
XFS (sdg1): Mounting Filesystem
XFS (sdg1): Ending clean mount
SELinux: initialized (dev sdg1, type xfs), uses xattr
 sdg: sdg1 sdg2
XFS (sdg1): Mounting Filesystem
XFS (sdg1): Ending clean mount
SELinux: initialized (dev sdg1, type xfs), uses xattr
 sdj: sdj2
 sdj: sdj1 sdj2
XFS (sdj1): Mounting Filesystem
XFS (sdj1): Ending clean mount
SELinux: initialized (dev sdj1, type xfs), uses xattr
 sdj: sdj1 sdj2
XFS (sdj1): Mounting Filesystem
XFS (sdj1): Ending clean mount
SELinux: initialized (dev sdj1, type xfs), uses xattr
 sdk: sdk2
 sdk: sdk1 sdk2
XFS (sdk1): Mounting Filesystem
XFS (sdk1): Ending clean mount
SELinux: initialized (dev sdk1, type xfs), uses xattr
 sdk: sdk1 sdk2
XFS (sdk1): Mounting Filesystem
XFS (sdk1): Ending clean mount
SELinux: initialized (dev sdk1, type xfs), uses xattr
 sdl: sdl2
 sdl: sdl1 sdl2
XFS (sdl1): Mounting Filesystem
XFS (sdl1): Ending clean mount
SELinux: initialized (dev sdl1, type xfs), uses xattr
 sdl: sdl1 sdl2
XFS (sdl1): Mounting Filesystem
XFS (sdl1): Ending clean mount
SELinux: initialized (dev sdl1, type xfs), uses xattr
 sdm: sdm2
 sdm: sdm1 sdm2
XFS (sdm1): Mounting Filesystem
XFS (sdm1): Ending clean mount
SELinux: initialized (dev sdm1, type xfs), uses xattr
 sdm: sdm1 sdm2
XFS (sdm1): Mounting Filesystem
XFS (sdm1): Ending clean mount
SELinux: initialized (dev sdm1, type xfs), uses xattr
traps: polkitd[12891] general protection ip:7f7a3cd6dcf2 sp:7fff00984960 error:0 in libmozjs-17.0.so[7f7a3cc2f000+3b3000]
traps: polkitd[21815] general protection ip:7fddfcdedcf2 sp:7fffd8fe3c40 error:0 in libmozjs-17.0.so[7fddfccaf000+3b3000]
traps: polkitd[32236] general protection ip:7f59e9ab3cf2 sp:7fff970d1b90 error:0 in libmozjs-17.0.so[7f59e9975000+3b3000]
traps: polkitd[9566] general protection ip:7f8cc8aedcf2 sp:7fff8ea4dc00 error:0 in libmozjs-17.0.so[7f8cc89af000+3b3000]
traps: polkitd[18724] general protection ip:7fa01a324cf2 sp:7fff072e6830 error:0 in libmozjs-17.0.so[7fa01a1e6000+3b3000]
traps: polkitd[28051] general protection ip:7f2afa5b8cf2 sp:7fff37b57c70 error:0 in libmozjs-17.0.so[7f2afa47a000+3b3000]
traps: polkitd[5166] general protection ip:7fef493aacf2 sp:7fff588459e0 error:0 in libmozjs-17.0.so[7fef4926c000+3b3000]
traps: polkitd[14607] general protection ip:7f0759e5acf2 sp:7fff77f90df0 error:0 in libmozjs-17.0.so[7f0759d1c000+3b3000]
perf samples too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
traps: polkitd[22407] general protection ip:7f3ad15e1cf2 sp:7ffffba42990 error:0 in libmozjs-17.0.so[7f3ad14a3000+3b3000]
traps: polkitd[32213] general protection ip:7f8829464cf2 sp:7fff40815c80 error:0 in libmozjs-17.0.so[7f8829326000+3b3000]
traps: polkitd[10392] general protection ip:7f5cadef8cf2 sp:7fffec7169f0 error:0 in libmozjs-17.0.so[7f5caddba000+3b3000]
traps: polkitd[19773] general protection ip:7fc0f2158cf2 sp:7fffe6914240 error:0 in libmozjs-17.0.so[7fc0f201a000+3b3000]
traps: polkitd[30229] general protection ip:7fbc4d052cf2 sp:7fff5cbaefd0 error:0 in libmozjs-17.0.so[7fbc4cf14000+3b3000]
traps: polkitd[7441] general protection ip:7fdfcf7fecf2 sp:7fff967901c0 error:0 in libmozjs-17.0.so[7fdfcf6c0000+3b3000]
traps: polkitd[18003] general protection ip:7f2eb8b42cf2 sp:7fffcb9a66f0 error:0 in libmozjs-17.0.so[7f2eb8a04000+3b3000]
traps: polkitd[28769] general protection ip:7f64231edcf2 sp:7ffff8170390 error:0 in libmozjs-17.0.so[7f64230af000+3b3000]
traps: polkitd[7352] general protection ip:7f9ced84fcf2 sp:7fffc448bec0 error:0 in libmozjs-17.0.so[7f9ced711000+3b3000]
traps: polkitd[18577] general protection ip:7fbd7be01cf2 sp:7fff6a1584e0 error:0 in libmozjs-17.0.so[7fbd7bcc3000+3b3000]
traps: polkitd[30180] general protection ip:7faf2308fcf2 sp:7fff9cb57e50 error:0 in libmozjs-17.0.so[7faf22f51000+3b3000]
traps: polkitd[8533] general protection ip:7f2075302cf2 sp:7fff561c9f80 error:0 in libmozjs-17.0.so[7f20751c4000+3b3000]
traps: polkitd[19630] general protection ip:7f18161d5cf2 sp:7ffff7ebbc10 error:0 in libmozjs-17.0.so[7f1816097000+3b3000]
traps: polkitd[30281] general protection ip:7f853d23dcf2 sp:7fff5996c210 error:0 in libmozjs-17.0.so[7f853d0ff000+3b3000]
traps: polkitd[9188] general protection ip:7fe9a219ecf2 sp:7fffe999cb50 error:0 in libmozjs-17.0.so[7fe9a2060000+3b3000]
traps: polkitd[20147] general protection ip:7f6fee614cf2 sp:7fffc5815df0 error:0 in libmozjs-17.0.so[7f6fee4d6000+3b3000]
traps: polkitd[31509] general protection ip:7f105c3f1cf2 sp:7fff9d5c1d10 error:0 in libmozjs-17.0.so[7f105c2b3000+3b3000]
traps: polkitd[10390] general protection ip:7f2431413cf2 sp:7fff41d3ede0 error:0 in libmozjs-17.0.so[7f24312d5000+3b3000]
traps: polkitd[22518] general protection ip:7f2faa405cf2 sp:7fffbb8f77f0 error:0 in libmozjs-17.0.so[7f2faa2c7000+3b3000]
traps: polkitd[1557] general protection ip:7fd8b817acf2 sp:7fffbeb66750 error:0 in libmozjs-17.0.so[7fd8b803c000+3b3000]
traps: polkitd[13596] general protection ip:7f8952890cf2 sp:7fff08f96f60 error:0 in libmozjs-17.0.so[7f8952752000+3b3000]
traps: polkitd[24278] general protection ip:7f4ab27bccf2 sp:7fffe1feb300 error:0 in libmozjs-17.0.so[7f4ab267e000+3b3000]

Return To qwe System Information