dmesg - audio-encoding.31-Dec-2015
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
RCU kthread priority: 1.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:33024 nr_irqs:488 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3591.872 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7183.74 BogoMIPS (lpj=3591872)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150818
ACPI: 5 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
SELinux: Disabled at boot.
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys bfqio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 20K (ffffffff819da000 - ffffffff819df000)
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
DMAR: RMRR base: 0x000000caec3000 end: 0x000000caed1fff
DMAR: RMRR base: 0x000000cb800000 end: 0x000000cf9fffff
DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz (family: 0x6, model: 0x3c, stepping: 0x3)
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
microcode: CPU1 microcode updated early to revision 0x1c, date = 2014-07-03
#2
microcode: CPU2 microcode updated early to revision 0x1c, date = 2014-07-03
#3
microcode: CPU3 microcode updated early to revision 0x1c, date = 2014-07-03
#4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (57469.95 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.capability
PM: Registering ACPI NVS region [mem 0xb7612000-0xb7618fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xc9c2c000-0xc9cf3fff] (819200 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
prandom: seed boundary self test passed
prandom: 100 self tests passed
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880224774000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880224779800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802247B2400 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150818/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150818/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff window]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xf7914000-0xf7917fff 64bit]
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7900000-0xf790ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf791f000-0xf791f00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io 0xf0c0-0xf0c7]
pci 0000:00:16.3: reg 0x14: [mem 0xf791d000-0xf791dfff]
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf791c000-0xf791c3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7910000-0xf7913fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf791b000-0xf791b3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8c4a] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf791a000-0xf791a7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7919000-0xf79190ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
pci 0000:01:00.0: [10de:1380] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [10de:0fbc] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xf7800000-0xf7800fff 64bit]
pci 0000:03:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xf7800000-0xf78fffff]
pci 0000:00:1c.2: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:04:00.0: [8086:244e] type 01 class 0x060401
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 04-05] (subtractive decode)
pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0xcfa00000-0xfeafffff window] (subtractive decode)
pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:04:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0xcfa00000-0xfeafffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=mem,locks=none
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
vgaarb: no bridge control possible 0000:00:02.0
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xb7612000-0xb7ffffff]
e820: reserve RAM buffer [mem 0xb7f6c000-0xb7ffffff]
e820: reserve RAM buffer [mem 0xc9b57000-0xcbffffff]
e820: reserve RAM buffer [mem 0xc9c2c000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
e820: reserve RAM buffer [mem 0x22e600000-0x22fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x1c00-0x1cfe] has been reserved
system 00:01: [io 0x1d00-0x1dfe] has been reserved
system 00:01: [io 0x1e00-0x1efe] has been reserved
system 00:01: [io 0x1f00-0x1ffe] has been reserved
system 00:01: [io 0x1800-0x18fe] could not be reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0a00-0x0a0f] has been reserved
system 00:04: [io 0x0a30-0x0a3f] has been reserved
system 00:04: [io 0x0a20-0x0a2f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:08: [mem 0xf7fdf000-0xf7fdffff] has been reserved
system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xf7800000-0xf78fffff]
pci 0000:00:1c.2: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:00:1c.3: PCI bridge to [bus 04-05]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 13 [mem 0xcfa00000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf78fffff]
pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:04: resource 13 [mem 0xcfa00000-0xfeafffff window]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:05: resource 11 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:05: resource 12 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:05: resource 13 [mem 0xcfa00000-0xfeafffff window]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 3844K (ffff88003786e000 - ffff880037c2f000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xc5b57000-0xc9b57000] (64MB) mapped at [ffff8800c5b57000-ffff8800c9b56fff]
RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
hw unit of domain pp0-core 2^-14 Joules
hw unit of domain package 2^-14 Joules
hw unit of domain dram 2^-14 Joules
hw unit of domain pp1-gpu 2^-14 Joules
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x1c
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x1c
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x1c
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x1c
microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x1c
microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x1c
microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x1c
microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x1c
microcode: Microcode Update Driver: v2.00 , Peter Oruba
simple-framebuffer simple-framebuffer.0: framebuffer at 0xf1000000, 0x300000 bytes, mapped to 0xffffc90001000000
simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1024x768x32, linelength=4096
Console: switching to colour frame buffer device 128x48
simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1451458263.239:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler bfq registered (default)
BFQ I/O-scheduler: v7r8
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
xenfs: not registering filesystem on non-xen platform
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
0000:00:16.3: ttyS1 at I/O 0xf0c0 (irq = 19, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
libphy: Fixed MDIO Bus: probed
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
Key type dns_resolver registered
registered taskstats version 1
zswap: zpool zbud not available, using default zbud
zpool: no driver for type zbud
zswap: zbud zpool not available
zswap: pool creation failed
Key type encrypted registered
evm: HMAC attrs: 0x1
Freeing unused kernel memory: 1040K (ffffffff818d6000 - ffffffff819da000)
CFS CPU scheduler.
random: systemd-tmpfile urandom read with 1 bits of entropy available
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.3.3-2-lqx xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 14 ports detected
SCSI subsystem initialized
libata version 3.00 loaded.
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.3.3-2-lqx xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf791c000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 4.3.3-2-lqx ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf791b000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 4.3.3-2-lqx ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf791a000 port 0xf791a100 irq 31
ata2: SATA max UDMA/133 abar m2048@0xf791a000 port 0xf791a180 irq 31
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
usb 3-1: new high-speed USB device number 2 using ehci-pci
usb 4-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-9: WDC WD10EZEX-22BN5A0, 01.01A01, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD10EZEX-22B 1A01 PQ: 0 ANSI: 5
ata2.00: ATAPI: ASUS DRW-24F1ST a, 1.00, max UDMA/100
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM ASUS DRW-24F1ST a 1.00 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-9: new low-speed USB device number 2 using xhci_hcd
sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 3-1: New USB device found, idVendor=8087, idProduct=8008
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 6 ports detected
usb 4-1: New USB device found, idVendor=8087, idProduct=8000
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 8 ports detected
usb 1-9: New USB device found, idVendor=2516, idProduct=001a
usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-9: Product: Keyboard -- QuickFire XT
usb 1-9: Manufacturer: CM Storm
usb 1-9: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-9: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: CM Storm Keyboard -- QuickFire XT as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:2516:001A.0001/input/input2
hid-generic 0003:2516:001A.0001: input,hidraw0: USB HID v1.10 Keyboard [CM Storm Keyboard -- QuickFire XT] on usb-0000:00:14.0-9/input0
input: CM Storm Keyboard -- QuickFire XT as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.1/0003:2516:001A.0002/input/input3
hid-generic 0003:2516:001A.0002: input,hidraw1: USB HID v1.10 Device [CM Storm Keyboard -- QuickFire XT] on usb-0000:00:14.0-9/input1
usb 1-10: new full-speed USB device number 3 using xhci_hcd
tsc: Refined TSC clocksource calibration: 3591.682 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33c5a15be52, max_idle_ns: 440795280454 ns
usb 1-10: New USB device found, idVendor=1038, idProduct=137a
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-10: Product: Kana v2 Gaming Mouse
usb 1-10: Manufacturer: SteelSeries
hid-generic 0003:1038:137A.0003: hiddev0,hidraw2: USB HID v1.11 Device [SteelSeries Kana v2 Gaming Mouse] on usb-0000:00:14.0-10/input0
input: SteelSeries Kana v2 Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:1038:137A.0004/input/input4
hid-generic 0003:1038:137A.0004: input,hidraw3: USB HID v1.11 Mouse [SteelSeries Kana v2 Gaming Mouse] on usb-0000:00:14.0-10/input1
random: nonblocking pool is initialized
PM: Starting manual resume from disk
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
clocksource: Switched to clocksource tsc
NET: Registered protocol family 10
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 228 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: display-manager.service: Cannot add dependency job, ignoring: Unit display-manager.service failed to load: No such file or directory.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Replay Read-Ahead Data...
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting Collect Read-Ahead Data...
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Mounting Debug File System...
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Listening on udev Control Socket.
systemd[1]: Mounting Temporary Directory...
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Reached target Paths.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Service...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd-readahead[230]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
systemd[1]: Started Collect Read-Ahead Data.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Mounted Debug File System.
systemd[1]: Started Replay Read-Ahead Data.
systemd[1]: Mounted POSIX Message Queue File System.
EXT4-fs (sda6): re-mounted. Opts: data=ordered
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted Temporary Directory.
systemd[1]: Started Remount Root and Kernel File Systems.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Started Load/Save Random Seed.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Started udev Kernel Device Manager.
systemd[1]: Started Journal Service.
systemd-journald[239]: Received request to flush runtime journal from PID 1
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
ACPI: Power Button [PWRF]
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB_.PCI0.SBUS.SMBI) (20150818/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ppdev: user-space parallel port driver
[drm] Initialized drm 1.1.0 20060810
snd_hda_intel 0000:00:03.0: failed to add i915 component master (-19)
nvidiafb 0000:01:00.0: BAR 3: can't reserve [mem 0xf0000000-0xf1ffffff 64bit pref]
nvidiafb: cannot request PCI regions
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
nvidia-nvlink: Nvlink Core is being initialized, major device number 246
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 358.16 Mon Nov 16 19:25:55 PST 2015
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: stripe=4,data=ordered
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: data=ordered
snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D2: dig-out=0x11/0x0
snd_hda_codec_realtek hdaudioC0D2: inputs:
snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input16
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input17
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input18
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input19
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc9000296c000, 94:de:80:ba:84:22, XID 0c900800 IRQ 33
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
Adding 4194300k swap on /dev/sda7. Priority:-1 extents:1 across:4194300k FS
r8169 0000:03:00.0 enp3s0: renamed from eth0
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
audit: type=1325 audit(1451458271.004:2): table=filter family=2 entries=0
audit: type=1300 audit(1451458271.004:2): arch=c000003e syscall=175 success=yes exit=0 a0=7f24f8354010 a1=1b48 a2=41a213 a3=0 items=0 ppid=377 pid=382 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/usr/bin/kmod" key=(null)
audit: type=1327 audit(1451458271.004:2): proctitle=2F7362696E2F6D6F6470726F62650069707461626C655F66696C746572002D71
audit: type=1325 audit(1451458271.005:3): table=filter family=2 entries=4
audit: type=1300 audit(1451458271.005:3): arch=c000003e syscall=54 success=yes exit=0 a0=a a1=0 a2=40 a3=1f57690 items=0 ppid=1 pid=377 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="connmand" exe="/usr/bin/connmand" key=(null)
audit: type=1327 audit(1451458271.005:3): proctitle=2F7573722F62696E2F636F6E6E6D616E64002D6E
audit: type=1325 audit(1451458271.121:4): table=mangle family=2 entries=0
audit: type=1300 audit(1451458271.121:4): arch=c000003e syscall=175 success=yes exit=0 a0=7f5def063010 a1=19d0 a2=41a213 a3=0 items=0 ppid=377 pid=385 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/usr/bin/kmod" key=(null)
audit: type=1327 audit(1451458271.121:4): proctitle=2F7362696E2F6D6F6470726F62650069707461626C655F6D616E676C65002D71
audit: type=1325 audit(1451458271.121:5): table=mangle family=2 entries=6
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
r8169 0000:03:00.0 enp3s0: link down
r8169 0000:03:00.0 enp3s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
r8169 0000:03:00.0 enp3s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
8021q: 802.1Q VLAN Support v1.8
NET: Registered protocol family 17
audit_printk_skb: 57 callbacks suppressed
audit: type=1006 audit(1451458278.428:11): pid=397 uid=0 old-auid=4294967295 auid=1000 old-ses=4294967295 ses=1 res=1
audit: type=1006 audit(1451458278.452:12): pid=421 uid=0 old-auid=4294967295 auid=1000 old-ses=4294967295 ses=2 res=1
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 358.16 Mon Nov 16 18:58:09 PST 2015
nvidia-modeset: Allocated GPU:0 (GPU-e29294cf-1b31-8a4e-52bd-f09c0e601a25) @ PCI:0000:01:00.0
snd_hda_intel 0000:00:1b.0: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
audit: type=1701 audit(1451484964.281:13): auid=1000 uid=1000 gid=1001 ses=1 pid=10395 comm="soffice.bin" exe="/usr/lib/libreoffice/program/soffice.bin" sig=11