dmesg - test01
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.2.0-19-generic (buildd@lgw01-28) (gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu2) ) #23-Ubuntu SMP Wed Nov 11 11:39:30 UTC 2015 (Ubuntu 4.2.0-19.23-generic 4.2.6)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x00000000000953ff] usable
BIOS-e820: [mem 0x0000000000095400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007d168fff] usable
BIOS-e820: [mem 0x000000007d169000-0x000000007d415fff] reserved
BIOS-e820: [mem 0x000000007d416000-0x000000007d52dfff] ACPI data
BIOS-e820: [mem 0x000000007d52e000-0x000000007d750fff] ACPI NVS
BIOS-e820: [mem 0x000000007d751000-0x000000007f2cefff] reserved
BIOS-e820: [mem 0x000000007f2cf000-0x000000007f2cffff] usable
BIOS-e820: [mem 0x000000007f2d0000-0x000000007f355fff] ACPI NVS
BIOS-e820: [mem 0x000000007f356000-0x000000007f7fffff] usable
BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000107fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Cirrascale VB1415/GA-7PESH1, BIOS R18 02/13/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x1080000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask 3FF000000000 write-back
1 base 001000000000 mask 3FFF80000000 write-back
2 base 000080000000 mask 3FFF80000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
original variable MTRRs
reg 0, base: 0GB, range: 64GB, type WB
reg 1, base: 64GB, range: 2GB, type WB
reg 2, base: 2GB, range: 2GB, type UC
total RAM covered: 65536M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64K num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 4GB, range: 4GB, type WB
reg 2, base: 8GB, range: 8GB, type WB
reg 3, base: 16GB, range: 16GB, type WB
reg 4, base: 32GB, range: 32GB, type WB
reg 5, base: 64GB, range: 2GB, type WB
e820: update [mem 0x80000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x7f800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fdad0-0x000fdadf] mapped at [ffff8800000fdad0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff88000008f000] 8f000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01ff0000, 0x01ff0fff] PGTABLE
BRK [0x01ff1000, 0x01ff1fff] PGTABLE
BRK [0x01ff2000, 0x01ff2fff] PGTABLE
init_memory_mapping: [mem 0x107fe00000-0x107fffffff]
[mem 0x107fe00000-0x107fffffff] page 1G
init_memory_mapping: [mem 0x1060000000-0x107fdfffff]
[mem 0x1060000000-0x107fdfffff] page 1G
init_memory_mapping: [mem 0x00100000-0x7d168fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x7cffffff] page 2M
[mem 0x7d000000-0x7d168fff] page 4k
init_memory_mapping: [mem 0x7f2cf000-0x7f2cffff]
[mem 0x7f2cf000-0x7f2cffff] page 4k
BRK [0x01ff3000, 0x01ff3fff] PGTABLE
init_memory_mapping: [mem 0x7f356000-0x7f7fffff]
[mem 0x7f356000-0x7f3fffff] page 4k
[mem 0x7f400000-0x7f7fffff] page 2M
init_memory_mapping: [mem 0x100000000-0x105fffffff]
[mem 0x100000000-0x105fffffff] page 1G
RAMDISK: [mem 0x34752000-0x363a0fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F04A0 000024 (v02 GBT )
ACPI: XSDT 0x000000007D44E090 0000A4 (v01 GBT GBTUACPI 01072009 AMI 00010013)
ACPI: FACP 0x000000007D45B730 00010C (v05 GBT GBTUACPI 01072009 AMI 00010013)
ACPI: DSDT 0x000000007D44E1C8 00D561 (v02 GBT GBTUACPI 00000026 INTL 20051117)
ACPI: FACS 0x000000007D748080 000040
ACPI: APIC 0x000000007D45B840 000224 (v03 GBT GBTUACPI 01072009 AMI 00010013)
ACPI: FPDT 0x000000007D45BA68 000044 (v01 GBT GBTUACPI 01072009 AMI 00010013)
ACPI: MCFG 0x000000007D45BAB0 00003C (v01 GBT GBTUACPI 01072009 MSFT 00000097)
ACPI: SLIC 0x000000007D45BAF0 000176 (v01 GBT GBTUACPI 01072009 AMI 00010013)
ACPI: SRAT 0x000000007D45BC68 0004B0 (v01 GBT GBTUACPI 00000001 AMI. 00000000)
ACPI: SLIT 0x000000007D45C118 000030 (v01 GBT GBTUACPI 00000000 AMI. 00000000)
ACPI: HPET 0x000000007D45C148 000038 (v01 GBT GBTUACPI 01072009 AMI. 00000005)
ACPI: PRAD 0x000000007D45C180 0000BE (v02 PRADID PRADTID 00000001 MSFT 03000001)
ACPI: SPMI 0x000000007D45C240 000040 (v05 GBT GBTUACPI 00000000 AMI. 00000000)
ACPI: SSDT 0x000000007D45C280 0D0CB0 (v02 GBT GBTUACPI 00004000 INTL 20051117)
ACPI: EINJ 0x000000007D52CF30 000130 (v01 GBT GBTUACPI 00000000 00000000)
ACPI: ERST 0x000000007D52D060 000230 (v01 GBT GBTUACPI 00000000 00000000)
ACPI: HEST 0x000000007D52D290 0000A8 (v01 GBT GBTUACPI 00000000 00000000)
ACPI: BERT 0x000000007D52D338 000030 (v01 GBT GBTUACPI 00000000 00000000)
ACPI: DMAR 0x000000007D52D368 000118 (v01 GBT GBTUACPI 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x0a -> Node 0
SRAT: PXM 0 -> APIC 0x0b -> Node 0
SRAT: PXM 0 -> APIC 0x0c -> Node 0
SRAT: PXM 0 -> APIC 0x0d -> Node 0
SRAT: PXM 0 -> APIC 0x0e -> Node 0
SRAT: PXM 0 -> APIC 0x0f -> Node 0
SRAT: PXM 1 -> APIC 0x20 -> Node 1
SRAT: PXM 1 -> APIC 0x21 -> Node 1
SRAT: PXM 1 -> APIC 0x22 -> Node 1
SRAT: PXM 1 -> APIC 0x23 -> Node 1
SRAT: PXM 1 -> APIC 0x24 -> Node 1
SRAT: PXM 1 -> APIC 0x25 -> Node 1
SRAT: PXM 1 -> APIC 0x26 -> Node 1
SRAT: PXM 1 -> APIC 0x27 -> Node 1
SRAT: PXM 1 -> APIC 0x28 -> Node 1
SRAT: PXM 1 -> APIC 0x29 -> Node 1
SRAT: PXM 1 -> APIC 0x2a -> Node 1
SRAT: PXM 1 -> APIC 0x2b -> Node 1
SRAT: PXM 1 -> APIC 0x2c -> Node 1
SRAT: PXM 1 -> APIC 0x2d -> Node 1
SRAT: PXM 1 -> APIC 0x2e -> Node 1
SRAT: PXM 1 -> APIC 0x2f -> Node 1
SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x87fffffff]
SRAT: Node 1 PXM 1 [mem 0x880000000-0x107fffffff]
NUMA: Initialized distance table, cnt=2
NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x87fffffff] -> [mem 0x00000000-0x87fffffff]
NODE_DATA(0) allocated [mem 0x87fffb000-0x87fffffff]
NODE_DATA(1) allocated [mem 0x107fff8000-0x107fffcfff]
[ffffea0000000000-ffffea0021ffffff] PMD -> [ffff88085fe00000-ffff88087fdfffff] on node 0
[ffffea0022000000-ffffea0041ffffff] PMD -> [ffff88105f600000-ffff88107f5fffff] on node 1
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000107fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000094fff]
node 0: [mem 0x0000000000100000-0x000000007d168fff]
node 0: [mem 0x000000007f2cf000-0x000000007f2cffff]
node 0: [mem 0x000000007f356000-0x000000007f7fffff]
node 0: [mem 0x0000000100000000-0x000000087fffffff]
node 1: [mem 0x0000000880000000-0x000000107fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff]
On node 0 totalpages: 8377768
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3988 pages, LIFO batch:0
DMA32 zone: 7961 pages used for memmap
DMA32 zone: 509460 pages, LIFO batch:31
Normal zone: 122880 pages used for memmap
Normal zone: 7864320 pages, LIFO batch:31
Initmem setup node 1 [mem 0x0000000880000000-0x000000107fffffff]
On node 1 totalpages: 8388608
Normal zone: 131072 pages used for memmap
Normal zone: 8388608 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1f] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
IOAPIC[2]: apic_id 3, version 32, address 0xfec40000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 32 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00095000-0x00095fff]
PM: Registered nosave memory: [mem 0x00096000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x7d169000-0x7d415fff]
PM: Registered nosave memory: [mem 0x7d416000-0x7d52dfff]
PM: Registered nosave memory: [mem 0x7d52e000-0x7d750fff]
PM: Registered nosave memory: [mem 0x7d751000-0x7f2cefff]
PM: Registered nosave memory: [mem 0x7f2d0000-0x7f355fff]
PM: Registered nosave memory: [mem 0x7f800000-0x7fffffff]
PM: Registered nosave memory: [mem 0x80000000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x90000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:32 nr_node_ids:2
PERCPU: Embedded 33 pages/cpu @ffff88085fa00000 s96728 r8192 d30248 u262144
pcpu-alloc: s96728 r8192 d30248 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 16 17 18 19 20 21 22 23
pcpu-alloc: [1] 08 09 10 11 12 13 14 15 [1] 24 25 26 27 28 29 30 31
Built 2 zonelists in Node order, mobility grouping on. Total pages: 16504378
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 65900820K/67065504K available (8148K kernel code, 1237K rwdata, 3800K rodata, 1460K init, 1292K bss, 1164684K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=2
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=32.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=32
NR_IRQS:16640 nr_irqs:1496 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-31.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2600.092 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5200.18 BogoMIPS (lpj=10400368)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 20 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff81ea4000 - ffffffff81eab000)
ftrace: allocating 30910 entries in 121 pages
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffe000 flags: 0x0
DMAR: dmar0: reg_base_addr fbffe000 ver 1:0 cap d2078c106f0462 ecap f020fe
DMAR: DRHD base: 0x000000dfffc000 flags: 0x1
DMAR: dmar1: reg_base_addr dfffc000 ver 1:0 cap d2078c106f0462 ecap f020fe
DMAR: RMRR base: 0x0000007f198000 end: 0x0000007f1a5fff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000fbffe000 proximity domain: 0x1
DMAR: RHSA base: 0x000000dfffc000 proximity domain: 0x0
DMAR-IR: IOAPIC id 3 under DRHD base 0xfbffe000 IOMMU 0
DMAR-IR: IOAPIC id 0 under DRHD base 0xdfffc000 IOMMU 1
DMAR-IR: IOAPIC id 2 under DRHD base 0xdfffc000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xdfffc000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2670 0 @ 2.60GHz (fam: 06, model: 2d, stepping: 06)
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7
.... node #1, CPUs: #8 #9 #10 #11 #12 #13 #14 #15
.... node #0, CPUs: #16 #17 #18 #19 #20 #21 #22 #23
.... node #1, CPUs: #24 #25 #26 #27 #28 #29 #30 #31
x86: Booted up 2 nodes, 32 CPUs
smpboot: Total of 32 processors activated (166427.20 BogoMIPS)
devtmpfs: initialized
memory block size : 2048MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x7d52e000-0x7d750fff] (2240512 bytes)
PM: Registering ACPI NVS region [mem 0x7f2d0000-0x7f355fff] (548864 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 17:34:40, date: 12/12/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
_OSC request data:1 1f
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150619/hwxface-580)
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-7e]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0x9fff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xdf407000-0xdf407fff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdf406000-0xdf40600f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000
pci 0000:00:16.1: reg 0x10: [mem 0xdf405000-0xdf40500f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xdf404000-0xdf4043ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:1d1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:1d1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xdf403000-0xdf4033ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:2826] type 00 class 0x010400
pci 0000:00:1f.2: reg 0x10: [io 0x9070-0x9077]
pci 0000:00:1f.2: reg 0x14: [io 0x9060-0x9063]
pci 0000:00:1f.2: reg 0x18: [io 0x9050-0x9057]
pci 0000:00:1f.2: reg 0x1c: [io 0x9040-0x9043]
pci 0000:00:1f.2: reg 0x20: [io 0x9020-0x903f]
pci 0000:00:1f.2: reg 0x24: [mem 0xdf402000-0xdf4027ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xdf401000-0xdf4010ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x9000-0x901f]
pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xdf400000-0xdf400fff 64bit]
pci 0000:01:00.0: [1002:679e] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xdf300000-0xdf33ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0x8000-0x80ff]
pci 0000:01:00.0: reg 0x30: [mem 0xdf340000-0xdf35ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.1: [1002:aaa0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xdf360000-0xdf363fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:03.0: bridge window [mem 0xdf300000-0xdf3fffff]
pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:11.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [8086:1521] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xdf220000-0xdf23ffff]
pci 0000:03:00.0: reg 0x18: [io 0x7020-0x703f]
pci 0000:03:00.0: reg 0x1c: [mem 0xdf244000-0xdf247fff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: reg 0x184: [mem 0xd0060000-0xd0063fff 64bit pref]
pci 0000:03:00.0: VF(n) BAR0 space: [mem 0xd0060000-0xd007ffff 64bit pref] (contains BAR0 for 8 VFs)
pci 0000:03:00.0: reg 0x190: [mem 0xd0040000-0xd0043fff 64bit pref]
pci 0000:03:00.0: VF(n) BAR3 space: [mem 0xd0040000-0xd005ffff 64bit pref] (contains BAR3 for 8 VFs)
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:03:00.1: [8086:1521] type 00 class 0x020000
pci 0000:03:00.1: reg 0x10: [mem 0xdf200000-0xdf21ffff]
pci 0000:03:00.1: reg 0x18: [io 0x7000-0x701f]
pci 0000:03:00.1: reg 0x1c: [mem 0xdf240000-0xdf243fff]
pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
pci 0000:03:00.1: reg 0x184: [mem 0xd0020000-0xd0023fff 64bit pref]
pci 0000:03:00.1: VF(n) BAR0 space: [mem 0xd0020000-0xd003ffff 64bit pref] (contains BAR0 for 8 VFs)
pci 0000:03:00.1: reg 0x190: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:03:00.1: VF(n) BAR3 space: [mem 0xd0000000-0xd001ffff 64bit pref] (contains BAR3 for 8 VFs)
pci 0000:03:00.1: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 03-04]
pci 0000:00:1c.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:05:00.0: [1106:3483] type 00 class 0x0c0330
pci 0000:05:00.0: reg 0x10: [mem 0xdf100000-0xdf100fff 64bit]
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 05]
pci 0000:00:1c.5: bridge window [mem 0xdf100000-0xdf1fffff]
pci 0000:06:00.0: [1a03:1150] type 01 class 0x060400
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 06-07]
pci 0000:00:1c.7: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.7: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:07:00.0: [1a03:2000] type 00 class 0x030000
pci 0000:07:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
pci 0000:07:00.0: reg 0x14: [mem 0xdf000000-0xdf01ffff]
pci 0000:07:00.0: reg 0x18: [io 0x6000-0x607f]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: PCI bridge to [bus 07]
pci 0000:06:00.0: bridge window [io 0x6000-0x6fff]
pci 0000:06:00.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0x9fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x80000000-0xdfffffff window] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus 7f])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:7f
pci_bus 0000:7f: root bus resource [bus 7f]
pci 0000:7f:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:7f:08.3: [8086:3c83] type 00 class 0x088000
pci 0000:7f:08.4: [8086:3c84] type 00 class 0x088000
pci 0000:7f:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:7f:09.3: [8086:3c93] type 00 class 0x088000
pci 0000:7f:09.4: [8086:3c94] type 00 class 0x088000
pci 0000:7f:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:7f:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:7f:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:7f:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:7f:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:7f:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:7f:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0c.2: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0c.3: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:7f:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:7f:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0d.2: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0d.3: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:7f:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:7f:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:7f:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:7f:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:7f:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:7f:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:7f:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:7f:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:7f:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:7f:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:7f:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:7f:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:7f:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:7f:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:7f:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:7f:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:7f:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:7f:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:7f:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:7f:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:7f:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:7f:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:7f:13.6: [8086:3c45] type 00 class 0x088000
pci_bus 0000:7f: on NUMA node 0
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-fe])
acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:01: _OSC: platform does not support [AER]
acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A08:01: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:80
pci_bus 0000:80: root bus resource [bus 80-fe]
pci_bus 0000:80: root bus resource [io 0xa000-0xffff window]
pci_bus 0000:80: root bus resource [mem 0xe0000000-0xfbffffff window]
pci 0000:80:00.0: [8086:3c01] type 01 class 0x060400
pci 0000:80:00.0: PME# supported from D0 D3hot D3cold
pci 0000:80:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:80:01.0: PME# supported from D0 D3hot D3cold
pci 0000:80:01.0: System wakeup disabled by ACPI
pci 0000:80:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:80:02.0: PME# supported from D0 D3hot D3cold
pci 0000:80:02.0: System wakeup disabled by ACPI
pci 0000:80:03.0: [8086:3c08] type 01 class 0x060400
pci 0000:80:03.0: PME# supported from D0 D3hot D3cold
pci 0000:80:03.0: System wakeup disabled by ACPI
pci 0000:80:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:80:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:80:05.4: [8086:3c2c] type 00 class 0x080020
pci 0000:80:05.4: reg 0x10: [mem 0xfbf00000-0xfbf00fff]
pci 0000:80:00.0: PCI bridge to [bus 81]
pci 0000:80:01.0: PCI bridge to [bus 82]
pci 0000:80:02.0: PCI bridge to [bus 83]
pci 0000:80:03.0: PCI bridge to [bus 84]
pci_bus 0000:80: on NUMA node 1
ACPI: PCI Root Bridge [UNC1] (domain 0000 [bus ff])
acpi PNP0A03:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:01: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A03:01: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:ff:08.3: [8086:3c83] type 00 class 0x088000
pci 0000:ff:08.4: [8086:3c84] type 00 class 0x088000
pci 0000:ff:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:ff:09.3: [8086:3c93] type 00 class 0x088000
pci 0000:ff:09.4: [8086:3c94] type 00 class 0x088000
pci 0000:ff:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:ff:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:ff:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:ff:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:ff:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:ff:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.2: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.3: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:ff:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:ff:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:ff:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:ff:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:ff:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:ff:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:ff:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:ff:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:ff:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:ff:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:ff:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:ff:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:ff:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:ff:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:ff:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:ff:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:ff:13.6: [8086:3c45] type 00 class 0x088000
pci_bus 0000:ff: on NUMA node 1
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:07:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:07:00.0
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00095400-0x0009ffff]
e820: reserve RAM buffer [mem 0x7d169000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7f2d0000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7f800000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed45000-0xfedfffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xdfffc000-0xdfffdfff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0a00-0x0a1f] has been reserved
system 00:02: [io 0x0a20-0x0a2f] has been reserved
system 00:02: [io 0x0a30-0x0a3f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs IPI0001 (active)
system 00:07: [io 0x0400-0x0453] could not be reserved
system 00:07: [io 0x0458-0x047f] has been reserved
system 00:07: [io 0x1180-0x119f] has been reserved
system 00:07: [io 0x0500-0x057f] has been reserved
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:08: [io 0x0454-0x0457] has been reserved
system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:09: [mem 0xfbffe000-0xfbffffff] could not be reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:0a: [mem 0xfbffe000-0xfbffffff] could not be reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:03.0: bridge window [mem 0xdf300000-0xdf3fffff]
pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:11.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: PCI bridge to [bus 03-04]
pci 0000:00:1c.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 05]
pci 0000:00:1c.5: bridge window [mem 0xdf100000-0xdf1fffff]
pci 0000:06:00.0: PCI bridge to [bus 07]
pci 0000:06:00.0: bridge window [io 0x6000-0x6fff]
pci 0000:06:00.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:1c.7: PCI bridge to [bus 06-07]
pci 0000:00:1c.7: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.7: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:1e.0: PCI bridge to [bus 08]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0x9fff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0x80000000-0xdfffffff window]
pci_bus 0000:01: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:01: resource 1 [mem 0xdf300000-0xdf3fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:03: resource 1 [mem 0xdf200000-0xdf2fffff]
pci_bus 0000:03: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:05: resource 1 [mem 0xdf100000-0xdf1fffff]
pci_bus 0000:06: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:06: resource 1 [mem 0xde000000-0xdf0fffff]
pci_bus 0000:07: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:07: resource 1 [mem 0xde000000-0xdf0fffff]
pci_bus 0000:08: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:08: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:08: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:08: resource 7 [io 0x0d00-0x9fff window]
pci_bus 0000:08: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:08: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:08: resource 10 [mem 0x80000000-0xdfffffff window]
pci 0000:80:00.0: PCI bridge to [bus 81]
pci 0000:80:01.0: PCI bridge to [bus 82]
pci 0000:80:02.0: PCI bridge to [bus 83]
pci 0000:80:03.0: PCI bridge to [bus 84]
pci_bus 0000:80: resource 4 [io 0xa000-0xffff window]
pci_bus 0000:80: resource 5 [mem 0xe0000000-0xfbffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 32768 (order: 8, 1048576 bytes)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 28988K (ffff880034752000 - ffff8800363a1000)
DMAR: [Firmware Bug]: RMRR entry for device 05:00.0 is broken - applying workaround
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x79169000-0x7d169000] (64MB) mapped at [ffff880079169000-ffff88007d168fff]
RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
hw unit of domain pp0-core 2^-16 Joules
hw unit of domain package 2^-16 Joules
hw unit of domain dram 2^-16 Joules
microcode: CPU0 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU1 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU2 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU3 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU4 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU5 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU6 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU7 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU8 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU9 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU10 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU11 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU12 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU13 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU14 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU15 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU16 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU17 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU18 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU19 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU20 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU21 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU22 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU23 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU24 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU25 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU26 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU27 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU28 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU29 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU30 sig=0x206d6, pf=0x1, revision=0x619
microcode: CPU31 sig=0x206d6, pf=0x1, revision=0x619
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 8192 (order: 7, 524288 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1449941681.064:1): initialized
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:11.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:11.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
pcieport 0000:80:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:80:00.0:pcie01: service driver pcie_pme loaded
pcieport 0000:80:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:80:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:80:02.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:80:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:80:03.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:80:03.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90007000000, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by WHEA _OSC.
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:05:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00000090
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.2.0-19-generic xhci-hcd
usb usb1: SerialNumber: 0000:05:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.2.0-19-generic xhci-hcd
usb usb2: SerialNumber: 0000:05:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xdf404000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 4.2.0-19-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xdf403000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 4.2.0-19-generic ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 36c9ddeec2968bfcda6740d7cd684bf04b702794'
registered taskstats version 1
zswap: loading zswap
zswap: using zbud pool
zswap: using lzo compressor
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 11:770:592
rtc_cmos 00:04: setting system clock to 2015-12-12 17:34:41 UTC (1449941681)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1460K (ffffffff81d37000 - ffffffff81ea4000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 32K (ffff8800017f8000 - ffff880001800000)
Freeing unused kernel memory: 296K (ffff880001bb6000 - ffff880001c00000)
random: systemd-udevd urandom read with 2 bits of entropy available
wmi: Mapper loaded
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
ahci 0000:00:1f.2: version 3.0
dca service started, version 1.12.1
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[drm] Initialized drm 1.1.0 20060810
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.18-k
igb: Copyright (c) 2007-2014 Intel Corporation.
igb 0000:03:00.0: PHY reset is blocked due to SOL/IDER session.
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xdf402000 port 0xdf402100 irq 39
ata2: SATA max UDMA/133 abar m2048@0xdf402000 port 0xdf402180 irq 39
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
ast 0000:07:00.0: enabling device (0000 -> 0003)
[drm] AST 2300 detected
[drm] VGA not enabled on entry, requesting chip POST
[drm] Analog VGA only
[drm] dram 1632000000 1 32 00e00000
[TTM] Zone kernel: Available graphics memory: 32965812 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
checking generic (c0000000 7f0000) vs hw (de000000 1000000)
ast 0000:07:00.0: fb1: astdrmfb frame buffer device
ast 0000:07:00.0: registered panic notifier
[drm] Initialized ast 0.1.0 20120228 for 0000:07:00.0 on minor 0
igb 0000:03:00.0: added PHC on eth0
igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:03:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 90:2b:34:5f:f0:3c
igb 0000:03:00.0: eth0: PBA No: 121109-005
igb 0000:03:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
igb 0000:03:00.1: added PHC on eth1
igb 0000:03:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:03:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 90:2b:34:5f:f0:3d
igb 0000:03:00.1: eth1: PBA No: 121109-005
igb 0000:03:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
igb 0000:03:00.0 enp3s0f0: renamed from eth0
igb 0000:03:00.1 enp3s0f1: renamed from eth1
usb 1-1: new high-speed USB device number 2 using xhci_hcd
usb 3-1: new high-speed USB device number 2 using ehci-pci
usb 4-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=2109, idProduct=3431
usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1: Product: USB2.0 Hub
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 3-1: New USB device found, idVendor=8087, idProduct=0024
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-2: New USB device found, idVendor=2109, idProduct=0812
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: USB3.0 Hub
usb 2-2: Manufacturer: VIA Labs, Inc.
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 6 ports detected
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 4 ports detected
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: OCZ-ARC100, 1.01, max UDMA/133
ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata2.00: ATA-8: OCZ-ARC100, 1.01, max UDMA/133
ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA OCZ-ARC100 1.01 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
scsi 1:0:0:0: Direct-Access ATA OCZ-ARC100 1.01 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/223 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: Attached scsi generic sg1 type 0
sdb: sdb1 sdb2 < >
sdb: partition table partially beyond EOD, enabling native capacity
sdb: sdb1 sdb2 < >
sdb: partition table partially beyond EOD, truncated
sdb: p1 size 781248512 extends beyond EOD, truncated
sdb: p2 start 781252606 is beyond EOD, truncated
sd 1:0:0:0: [sdb] Attached SCSI disk
sd 0:0:0:0: [sda] Attached SCSI disk
usb 4-1: New USB device found, idVendor=8087, idProduct=0024
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 8 ports detected
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
usb 1-1.2: new high-speed USB device number 3 using xhci_hcd
systemd[1]: Failed to insert module 'kdbus': Function not implemented
systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
usb 3-1.1: new high-speed USB device number 3 using ehci-pci
usb 4-1.5: new high-speed USB device number 3 using ehci-pci
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Created slice Root Slice.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Slices.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Created slice system-getty.slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Started Braille Device Support.
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Mounted Debug File System.
systemd[1]: Started Create list of required static device nodes for the current kernel.
lp: driver loaded but no devices found
usb 1-1.2: New USB device found, idVendor=2109, idProduct=2812
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2: Product: USB2.0 Hub
usb 1-1.2: Manufacturer: VIA Labs, Inc.
hub 1-1.2:1.0: USB hub found
hub 1-1.2:1.0: 4 ports detected
ppdev: user-space parallel port driver
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Started Create Static Device Nodes in /dev.
it87: Found IT8728F chip at 0xa30, revision 0
it87: Beeping is supported
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting FUSE Control File System...
usb 3-1.1: New USB device found, idVendor=0624, idProduct=0248
usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.1: Product: Gadget USB HUB
usb 3-1.1: Manufacturer: no manufacturer
usb 3-1.1: SerialNumber: 0123456789
hub 3-1.1:1.0: USB hub found
hub 3-1.1:1.0: 5 ports detected
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started udev Kernel Device Manager.
systemd[1]: Starting Remount Root and Kernel File Systems...
usb 4-1.5: New USB device found, idVendor=148f, idProduct=3070
usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-1.5: Product: 802.11 n WLAN
usb 4-1.5: Manufacturer: Ralink
usb 4-1.5: SerialNumber: 1.0
EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
systemd[1]: Started Remount Root and Kernel File Systems.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting Wait for all "auto" /etc/network/interfaces to be up for network-online.target...
systemd[1]: Reached target Remote File Systems.
systemd[1]: Starting Set console keymap...
systemd[1]: Starting Clean up any mess left by 0dns-up...
systemd[1]: Starting LSB: AppArmor initialization...
systemd[1]: Starting Tell Plymouth To Write Out Runtime Data...
systemd[1]: Started Load/Save Random Seed.
systemd[1]: Started Wait for all "auto" /etc/network/interfaces to be up for network-online.target.
systemd[1]: Started Clean up any mess left by 0dns-up.
systemd[1]: Starting Nameserver information manager...
systemd[1]: Started Tell Plymouth To Write Out Runtime Data.
tsc: Refined TSC clocksource calibration: 2599.993 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a3556805, max_idle_ns: 440795233934 ns
systemd[1]: Started Set console keymap.
systemd[1]: Started Nameserver information manager.
usb 4-1.6: new full-speed USB device number 4 using ehci-pci
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: probing via ACPI
ipmi_si 00:06: [io 0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: probing via SMBIOS
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
systemd[1]: Started udev Coldplug all Devices.
audit: type=1400 audit(1449941682.404:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=826 comm="apparmor_parser"
audit: type=1400 audit(1449941682.404:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=826 comm="apparmor_parser"
systemd[1]: Starting Show Plymouth Boot Screen...
audit: type=1400 audit(1449941682.408:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=826 comm="apparmor_parser"
audit: type=1400 audit(1449941682.408:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=826 comm="apparmor_parser"
audit: type=1400 audit(1449941682.408:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=826 comm="apparmor_parser"
audit: type=1400 audit(1449941682.408:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=826 comm="apparmor_parser"
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
mei_me 0000:00:16.0: Device doesn't have valid ME Interface
audit: type=1400 audit(1449941682.424:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=826 comm="apparmor_parser"
audit: type=1400 audit(1449941682.424:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=826 comm="apparmor_parser"
audit: type=1400 audit(1449941682.424:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=826 comm="apparmor_parser"
systemd[1]: Started Show Plymouth Boot Screen.
systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
EDAC MC: Ver: 3.0.0
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC MC0: Giving out device to module sbridge_edac.c controller Sandy Bridge Socket#0: DEV 0000:7f:0e.0 (POLLED)
EDAC MC1: Giving out device to module sbridge_edac.c controller Sandy Bridge Socket#1: DEV 0000:ff:0e.0 (POLLED)
EDAC sbridge: Ver: 1.1.1
systemd[1]: Started LSB: AppArmor initialization.
systemd[1]: Started Journal Service.
systemd-journald[643]: Received request to flush runtime journal from PID 1
usb 4-1.6: New USB device found, idVendor=046d, idProduct=c534
usb 4-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1.6: Product: USB Receiver
usb 4-1.6: Manufacturer: Logitech
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
fglrx: module verification failed: signature and/or required key missing - tainting kernel
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0/input5
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0/input6
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0/input7
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0/input8
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0/input9
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0/input10
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
[fglrx] Maximum main memory to use for locked dma buffers: 63162 MBytes.
[fglrx] vendor: 1002 device: 679e revision: 0 count: 1
[fglrx] ioport: bar 4, base 0x8000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 15.20.3 [Sep 8 2015] with 1 minors
usb 3-1.1.1: new high-speed USB device number 4 using ehci-pci
ipmi_si 00:06: Found new BMC (man_id: 0x003c0a, prod_id: 0x0000, dev_id: 0x20)
ipmi_si 00:06: IPMI kcs interface initialized
IPMI SSIF Interface driver
Adding 54805500k swap on /dev/mapper/isw_bifcfgeb_Volume0p5. Priority:-1 extents:1 across:54805500k SSFS
usb 3-1.1.1: New USB device found, idVendor=0624, idProduct=0249
usb 3-1.1.1: New USB device strings: Mfr=4, Product=5, SerialNumber=6
usb 3-1.1.1: Product: Keyboard/Mouse Function
usb 3-1.1.1: Manufacturer: Avocent
usb 3-1.1.1: SerialNumber: 20121018
hidraw: raw HID events driver (C) Jiri Kosina
cgroup: new mount options do not match the existing superblock, will be ignored
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/0003:046D:C534.0001/input/input11
hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.6/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.1/0003:046D:C534.0002/input/input12
IPv6: ADDRCONF(NETDEV_UP): enp3s0f0: link is not ready
hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.6/input1
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1.1/3-1.1.1:1.0/0003:0624:0249.0003/input/input13
IPv6: ADDRCONF(NETDEV_UP): enp3s0f0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp3s0f1: link is not ready
hid-generic 0003:0624:0249.0003: input,hidraw2: USB HID v1.00 Keyboard [Avocent Keyboard/Mouse Function] on usb-0000:00:1a.0-1.1.1/input0
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1.1/3-1.1.1:1.1/0003:0624:0249.0004/input/input14
hid-generic 0003:0624:0249.0004: input,hidraw3: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:1a.0-1.1.1/input1
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1.1/3-1.1.1:1.2/0003:0624:0249.0005/input/input15
hid-generic 0003:0624:0249.0005: input,hidraw4: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:1a.0-1.1.1/input2
IPv6: ADDRCONF(NETDEV_UP): enp3s0f1: link is not ready
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: device changed decodes: PCI:0000:07:00.0,olddecodes=io+mem,decodes=none:owns=none
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
[fglrx] Firegl kernel thread PID: 1269
[fglrx] Firegl kernel thread PID: 1270
[fglrx] Firegl kernel thread PID: 1271
[fglrx] IRQ 60 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:f7b4000, size:4000
[fglrx] Reserved FB block: Unshared offset:f7b8000, size:548000
[fglrx] Reserved FB block: Unshared offset:7ffee000, size:12000
clocksource: Switched to clocksource tsc
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
usb 4-1.5: reset high-speed USB device number 3 using ehci-pci
ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
usbcore: registered new interface driver rt2800usb
rt2800usb 4-1.5:1.0 wlx14358b0a5588: renamed from wlan0
IPv6: ADDRCONF(NETDEV_UP): wlx14358b0a5588: link is not ready
ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
random: nonblocking pool is initialized
IPv6: ADDRCONF(NETDEV_UP): wlx14358b0a5588: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlx14358b0a5588: link is not ready
wlx14358b0a5588: authenticate with 6c:b0:ce:bb:74:5e
wlx14358b0a5588: send auth to 6c:b0:ce:bb:74:5e (try 1/3)
wlx14358b0a5588: authenticated
wlx14358b0a5588: associate with 6c:b0:ce:bb:74:5e (try 1/3)
wlx14358b0a5588: RX AssocResp from 6c:b0:ce:bb:74:5e (capab=0x411 status=0 aid=1)
wlx14358b0a5588: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlx14358b0a5588: link becomes ready