dmesg - 15.10-x64
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.2.0-18-generic (buildd@lgw01-38) (gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu2) ) #22-Ubuntu SMP Fri Nov 6 18:25:50 UTC 2015 (Ubuntu 4.2.0-18.22-generic 4.2.3)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
tseg: 0000000000
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cfe8ffff] usable
BIOS-e820: [mem 0x00000000cfe90000-0x00000000cfea7fff] ACPI data
BIOS-e820: [mem 0x00000000cfea8000-0x00000000cfecffff] ACPI NVS
BIOS-e820: [mem 0x00000000cfed0000-0x00000000cfefffff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: System manufacturer System Product Name/M4A87TD EVO, BIOS 1101 11/16/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000130000000 aka 4864M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcfe90 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01ff0000, 0x01ff0fff] PGTABLE
BRK [0x01ff1000, 0x01ff1fff] PGTABLE
BRK [0x01ff2000, 0x01ff2fff] PGTABLE
init_memory_mapping: [mem 0x12fe00000-0x12fffffff]
[mem 0x12fe00000-0x12fffffff] page 2M
BRK [0x01ff3000, 0x01ff3fff] PGTABLE
init_memory_mapping: [mem 0x120000000-0x12fdfffff]
[mem 0x120000000-0x12fdfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x11fffffff]
[mem 0x100000000-0x11fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcfe8ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xcfdfffff] page 2M
[mem 0xcfe00000-0xcfe8ffff] page 4k
RAMDISK: [mem 0x34076000-0x36032fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FBAD0 000024 (v02 ACPIAM)
ACPI: XSDT 0x00000000CFE90100 00005C (v01 111610 XSDT1859 20101116 MSFT 00000097)
ACPI: FACP 0x00000000CFE90290 0000F4 (v03 111610 FACP1859 20101116 MSFT 00000097)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20150619/tbfadt-623)
ACPI: DSDT 0x00000000CFE90450 00EB26 (v01 A1585 A1585000 00000000 INTL 20060113)
ACPI: FACS 0x00000000CFEA8000 000040
ACPI: FACS 0x00000000CFEA8000 000040
ACPI: APIC 0x00000000CFE90390 00007C (v01 111610 APIC1859 20101116 MSFT 00000097)
ACPI: MCFG 0x00000000CFE90410 00003C (v01 111610 OEMMCFG 20101116 MSFT 00000097)
ACPI: OEMB 0x00000000CFEA8040 000072 (v01 111610 OEMB1859 20101116 MSFT 00000097)
ACPI: SRAT 0x00000000CFE9F8A0 0000E8 (v01 AMD FAM_F_10 00000002 AMD 00000001)
ACPI: HPET 0x00000000CFE9F990 000038 (v01 111610 OEMHPET 20101116 MSFT 00000097)
ACPI: SSDT 0x00000000CFE9F9D0 00088C (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
SRAT: Node 0 PXM 0 [mem 0x00100000-0xcfffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x12fffffff]
NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xcfffffff] -> [mem 0x00000000-0xcfffffff]
NUMA: Node 0 [mem 0x00000000-0xcfffffff] + [mem 0x100000000-0x12fffffff] -> [mem 0x00000000-0x12fffffff]
NODE_DATA(0) allocated [mem 0x12fff9000-0x12fffdfff]
[ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000012fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000cfe8ffff]
node 0: [mem 0x0000000100000000-0x000000012fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000012fffffff]
On node 0 totalpages: 1048110
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 13243 pages used for memmap
DMA32 zone: 847504 pages, LIFO batch:31
Normal zone: 3072 pages used for memmap
Normal zone: 196608 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
smpboot: Allowing 6 CPUs, 2 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
PM: Registered nosave memory: [mem 0xcfe90000-0xcfea7fff]
PM: Registered nosave memory: [mem 0xcfea8000-0xcfecffff]
PM: Registered nosave memory: [mem 0xcfed0000-0xcfefffff]
PM: Registered nosave memory: [mem 0xcff00000-0xffefffff]
PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
e820: [mem 0xcff00000-0xffefffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88012fc00000 s96728 r8192 d30248 u262144
pcpu-alloc: s96728 r8192 d30248 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - -
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031710
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0xc4000000-0xc5ffffff] (32MB)
Aperture pointing to e820 RAM. Ignoring.
AGP: Your BIOS doesn't leave an aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
Memory: 3945320K/4192440K available (8146K kernel code, 1237K rwdata, 3800K rodata, 1460K init, 1292K bss, 247120K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
NR_IRQS:16640 nr_irqs:472 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-5.
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3210.814 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6421.62 BogoMIPS (lpj=12843256)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff81ea4000 - ffffffff81eab000)
ftrace: allocating 30905 entries in 121 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Phenom(tm) II X4 955 Processor (fam: 10, model: 04, stepping: 03)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (25686.51 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xcfea8000-0xcfecffff] (163840 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 14:56:18, date: 11/30/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 0: io port [1000, ffffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [mem 0xe0000000-0xefffffff]
node 0 link 0: mmio [e0000000, efffffff] ==> none
node 0 link 0: mmio [f0000000, ffffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
TOM2: 0000000130000000 aka 4864M
bus: [bus 00-07] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0xf0000000-0xffffffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xd0000000-0xdfffffff]
bus: 00 [mem 0x130000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 3 blocks of module-level executable AML code
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xcff00000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
pci 0000:00:00.0: [1002:5957] type 00 class 0x060000
pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [1002:597e] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
pci 0000:00:11.0: reg 0x10: [io 0xa000-0xa007]
pci 0000:00:11.0: reg 0x14: [io 0x9000-0x9003]
pci 0000:00:11.0: reg 0x18: [io 0x8000-0x8007]
pci 0000:00:11.0: reg 0x1c: [io 0x7000-0x7003]
pci 0000:00:11.0: reg 0x20: [io 0x6000-0x600f]
pci 0000:00:11.0: reg 0x24: [mem 0xfbcfa000-0xfbcfa3ff]
pci 0000:00:11.0: set SATA to AHCI mode
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfbcf3000-0xfbcf3fff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfbcfa400-0xfbcfa4ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfbcf8000-0xfbcf8fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfbcfa800-0xfbcfa8ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfbcf4000-0xfbcf7fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfbcf9000-0xfbcf9fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfbcfb000-0xfbcfbfff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfbcfac00-0xfbcfacff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:05:00.0: [10de:1244] type 00 class 0x030000
pci 0000:05:00.0: reg 0x10: [mem 0xfc000000-0xfdffffff]
pci 0000:05:00.0: reg 0x14: [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:05:00.0: reg 0x1c: [mem 0xd4000000-0xd7ffffff 64bit pref]
pci 0000:05:00.0: reg 0x24: [io 0xec00-0xec7f]
pci 0000:05:00.0: reg 0x30: [mem 0xfe980000-0xfe9fffff pref]
pci 0000:05:00.1: [10de:0bee] type 00 class 0x040300
pci 0000:05:00.1: reg 0x10: [mem 0xfe97c000-0xfe97ffff]
pci 0000:00:02.0: PCI bridge to [bus 05]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfc000000-0xfe9fffff]
pci 0000:00:02.0: bridge window [mem 0xd4000000-0xdfffffff 64bit pref]
pci 0000:04:00.0: [197b:2361] type 00 class 0x010185
pci 0000:04:00.0: reg 0x24: [mem 0xfbfffc00-0xfbfffdff]
pci 0000:04:00.0: PME# supported from D3hot
pci 0000:04:00.1: [197b:0368] type 00 class 0x010185
pci 0000:04:00.1: reg 0x10: [io 0xdc00-0xdc07]
pci 0000:04:00.1: reg 0x14: [io 0xd880-0xd883]
pci 0000:04:00.1: reg 0x18: [io 0xd800-0xd807]
pci 0000:04:00.1: reg 0x1c: [io 0xd480-0xd483]
pci 0000:04:00.1: reg 0x20: [io 0xd400-0xd40f]
pci 0000:00:09.0: PCI bridge to [bus 04]
pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:09.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:03:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xfbefe000-0xfbefffff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: PCI bridge to [bus 03]
pci 0000:00:0a.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:02:08.0: [1106:3044] type 00 class 0x0c0010
pci 0000:02:08.0: reg 0x10: [mem 0xfbdff800-0xfbdfffff]
pci 0000:02:08.0: reg 0x14: [io 0xcc00-0xcc7f]
pci 0000:02:08.0: supports D2
pci 0000:02:08.0: PME# supported from D2 D3hot D3cold
pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:14.4: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [io 0xb800-0xb8ff]
pci 0000:01:00.0: reg 0x18: [mem 0xd3fff000-0xd3ffffff 64bit pref]
pci 0000:01:00.0: reg 0x20: [mem 0xd3ff8000-0xd3ffbfff 64bit pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.0: PCI bridge to [bus 01]
pci 0000:00:15.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:15.0: bridge window [mem 0xd3f00000-0xd3ffffff 64bit pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0, disabled.
ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:05:00.0
vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:05:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0xcfe90000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:01: [dma 0 disabled]
pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: [io 0x040b] has been reserved
system 00:03: [io 0x04d6] has been reserved
system 00:03: [io 0x0c00-0x0c01] has been reserved
system 00:03: [io 0x0c14] has been reserved
system 00:03: [io 0x0c50-0x0c51] has been reserved
system 00:03: [io 0x0c52] has been reserved
system 00:03: [io 0x0c6c] has been reserved
system 00:03: [io 0x0c6f] has been reserved
system 00:03: [io 0x0cd0-0x0cd1] has been reserved
system 00:03: [io 0x0cd2-0x0cd3] has been reserved
system 00:03: [io 0x0cd4-0x0cd5] has been reserved
system 00:03: [io 0x0cd6-0x0cd7] has been reserved
system 00:03: [io 0x0cd8-0x0cdf] has been reserved
system 00:03: [io 0x0800-0x089f] could not be reserved
system 00:03: [io 0x0b00-0x0b1f] has been reserved
system 00:03: [io 0x0b20-0x0b3f] has been reserved
system 00:03: [io 0x0900-0x090f] has been reserved
system 00:03: [io 0x0910-0x091f] has been reserved
system 00:03: [io 0xfe00-0xfefe] has been reserved
system 00:03: [mem 0xcff00000-0xcfffffff] has been reserved
system 00:03: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:03: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:03: [mem 0xfed80000-0xfed80fff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x0230-0x023f] has been reserved
system 00:04: [io 0x0290-0x029f] has been reserved
system 00:04: [io 0x0f40-0x0f4f] has been reserved
system 00:04: [io 0x0a30-0x0a3f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:06: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:06: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:06: [mem 0x00100000-0xcfefffff] could not be reserved
system 00:06: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:02.0: PCI bridge to [bus 05]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfc000000-0xfe9fffff]
pci 0000:00:02.0: bridge window [mem 0xd4000000-0xdfffffff 64bit pref]
pci 0000:00:09.0: PCI bridge to [bus 04]
pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:09.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:0a.0: PCI bridge to [bus 03]
pci 0000:00:0a.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:14.4: PCI bridge to [bus 02]
pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:14.4: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:15.0: PCI bridge to [bus 01]
pci 0000:00:15.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:15.0: bridge window [mem 0xd3f00000-0xd3ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff window]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window]
pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
pci_bus 0000:05: resource 1 [mem 0xfc000000-0xfe9fffff]
pci_bus 0000:05: resource 2 [mem 0xd4000000-0xdfffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:02: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:02: resource 8 [mem 0xcff00000-0xdfffffff window]
pci_bus 0000:02: resource 9 [mem 0xf0000000-0xfebfffff window]
pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:01: resource 2 [mem 0xd3f00000-0xd3ffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:05:00.0: Video device with shadowed ROM
pci 0000:04:00.0: async suspend disabled to avoid multi-function power-on ordering issue
pci 0000:04:00.1: async suspend disabled to avoid multi-function power-on ordering issue
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 32500K (ffff880034076000 - ffff880036033000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
microcode: CPU0: patch_level=0x010000c8
microcode: CPU1: patch_level=0x010000c8
microcode: CPU2: patch_level=0x010000c8
microcode: CPU3: patch_level=0x010000c8
microcode: Microcode Update Driver: v2.00 , Peter Oruba
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1448895379.864:1): initialized
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pci 0000:05:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pci 0000:04:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:0a.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:0a.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1280x800x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd5000000, mapped to 0xffffc90000800000, using 4032k, total 4032k
Console: switching to colour frame buffer device 160x50
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
QUIRK: Enable AMD PLL fix
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:03:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.2.0-18-generic xhci-hcd
usb usb1: SerialNumber: 0000:03:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.2.0-18-generic xhci-hcd
usb usb2: SerialNumber: 0000:03:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfbcfa400
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 4.2.0-18-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:12.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfbcfa800
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 4.2.0-18-generic ehci_hcd
usb usb4: SerialNumber: 0000:00:13.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfbcfac00
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 4.2.0-18-generic ehci_hcd
usb usb5: SerialNumber: 0000:00:16.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:12.0: irq 18, io mem 0xfbcf3000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 4.2.0-18-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:12.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:13.0: irq 18, io mem 0xfbcf8000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 4.2.0-18-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:13.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 8
ohci-pci 0000:00:14.5: irq 18, io mem 0xfbcf9000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: OHCI PCI host controller
usb usb8: Manufacturer: Linux 4.2.0-18-generic ohci_hcd
usb usb8: SerialNumber: 0000:00:14.5
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 9
ohci-pci 0000:00:16.0: irq 18, io mem 0xfbcfb000
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: OHCI PCI host controller
usb usb9: Manufacturer: Linux 4.2.0-18-generic ohci_hcd
usb usb9: SerialNumber: 0000:00:16.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 4 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 93ad27021225ce1bb4865e4bab1e2b6a5f099429'
registered taskstats version 1
zswap: loading zswap
zswap: using zbud pool
zswap: using lzo compressor
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 7:661:941
rtc_cmos 00:00: setting system clock to 2015-11-30 14:56:20 UTC (1448895380)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1460K (ffffffff81d37000 - ffffffff81ea4000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 36K (ffff8800017f7000 - ffff880001800000)
Freeing unused kernel memory: 296K (ffff880001bb6000 - ffff880001c00000)
random: systemd-udevd urandom read with 3 bits of entropy available
usb 3-1: new high-speed USB device number 2 using ehci-pci
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
pata_jmicron 0000:04:00.1: enabling device (0000 -> 0001)
scsi host1: pata_jmicron
scsi host0: ahci
scsi host2: pata_jmicron
scsi host3: ahci
ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 18
ata6: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 18
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m1024@0xfbcfa000 port 0xfbcfa100 irq 33
ata2: SATA max UDMA/133 abar m1024@0xfbcfa000 port 0xfbcfa180 irq 33
ata3: SATA max UDMA/133 abar m1024@0xfbcfa000 port 0xfbcfa200 irq 33
ata4: SATA max UDMA/133 abar m1024@0xfbcfa000 port 0xfbcfa280 irq 33
ahci 0000:04:00.0: JMB361 has only one port
ahci 0000:04:00.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi host7: ahci
ata9: SATA max UDMA/133 abar m512@0xfbfffc00 port 0xfbfffd00 irq 17
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0 eth0: RTL8168e/8111e at 0xffffc90000792000, f4:6d:04:05:75:eb, XID 0c100000 IRQ 34
r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi host6: pata_atiixp
scsi host8: pata_atiixp
ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
r8169 0000:01:00.0 enp1s0: renamed from eth0
firewire_ohci 0000:02:08.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
usb 3-1: New USB device found, idVendor=0bc2, idProduct=2300
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: Portable
usb 3-1: Manufacturer: Seagate
usb 3-1: SerialNumber: 2GHWCPQC
ata5.00: ATA-7: Maxtor 6Y120L0, YAR41BW0, max UDMA/133
ata5.00: 240121728 sectors, multi 0: LBA
ata5.01: ATAPI: PIONEER DVD-RW DVR-110D, 1.17, max UDMA/66
ata5.00: configured for UDMA/100
ata5.01: configured for UDMA/66
scsi 1:0:0:0: Direct-Access ATA Maxtor 6Y120L0 1BW0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 240121728 512-byte logical blocks: (122 GB/114 GiB)
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:1:0: CD-ROM PIONEER DVD-RW DVR-110D 1.17 PQ: 0 ANSI: 5
sr 1:0:1:0: [sr0] scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:1:0: Attached scsi CD-ROM sr0
sr 1:0:1:0: Attached scsi generic sg1 type 5
sda: sda1
sd 1:0:0:0: [sda] Attached SCSI disk
usb 7-1: new full-speed USB device number 2 using ohci-pci
usb 9-4: new low-speed USB device number 2 using ohci-pci
ata3: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
usb 7-1: New USB device found, idVendor=1532, idProduct=0015
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-1: Product: Razer Naga
usb 7-1: Manufacturer: Razer
hidraw: raw HID events driver (C) Jiri Kosina
usb 9-4: New USB device found, idVendor=0b43, idProduct=0003
usb 9-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 9-4: Product: Dual PSX-USB Adaptor
usb 9-4: Manufacturer: Dual PSX-USB Adaptor
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: TSSTcorp DVDWBD SH-B123L, BOOT, max UDMA/100
ata1.00: ATA-7: Maxtor 6L200M0, BANC1E00, max UDMA/133
ata1.00: 398297088 sectors, multi 0: LBA48 NCQ (not used)
ata2.00: configured for UDMA/100
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Maxtor 6L200M0 1E00 PQ: 0 ANSI: 5
sd 0:0:0:0: [sdb] 398297088 512-byte logical blocks: (203 GB/189 GiB)
sd 0:0:0:0: Attached scsi generic sg2 type 0
sd 0:0:0:0: [sdb] Write Protect is off
sd 0:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 6-5: new full-speed USB device number 2 using ohci-pci
scsi 3:0:0:0: CD-ROM TSSTcorp DVDWBD SH-B123L BOOT PQ: 0 ANSI: 5
usb-storage 3-1:1.0: USB Mass Storage device detected
usb-storage 3-1:1.0: Quirks match for vid 0bc2 pid 2300: 200000
scsi host9: usb-storage 3-1:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbcore: registered new interface driver uas
input: Razer Razer Naga as /devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1:1.0/0003:1532:0015.0001/input/input5
hid-generic 0003:1532:0015.0001: input,hidraw0: USB HID v1.11 Mouse [Razer Razer Naga] on usb-0000:00:13.0-1/input0
input: Razer Razer Naga as /devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1:1.1/0003:1532:0015.0003/input/input6
input: Dual PSX-USB Adaptor Dual PSX-USB Adaptor as /devices/pci0000:00/0000:00:16.0/usb9/9-4/9-4:1.0/0003:0B43:0003.0002/input/input7
sdb: sdb1 sdb2 < sdb5 >
sd 0:0:0:0: [sdb] Attached SCSI disk
sr 3:0:0:0: [sr1] scsi3-mmc drive: 59x/61x caddy
sr 3:0:0:0: Attached scsi CD-ROM sr1
sr 3:0:0:0: Attached scsi generic sg3 type 5
firewire_core 0000:02:08.0: created device fw0: GUID 001fc600000e10af, S400
hid-generic 0003:1532:0015.0003: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer Naga] on usb-0000:00:13.0-1/input1
input: Dual PSX-USB Adaptor Dual PSX-USB Adaptor as /devices/pci0000:00/0000:00:16.0/usb9/9-4/9-4:1.0/0003:0B43:0003.0002/input/input8
smartjoyplus 0003:0B43:0003.0002: input,hidraw2: USB HID v1.00 Joystick [Dual PSX-USB Adaptor Dual PSX-USB Adaptor ] on usb-0000:00:16.0-4/input0
smartjoyplus 0003:0B43:0003.0002: Force feedback for SmartJoy PLUS PS2/USB adapter
tsc: Refined TSC clocksource calibration: 3210.782 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e4813491eb, max_idle_ns: 440795226036 ns
ata5: drained 65536 bytes to clear DRQ
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: BMDMA stat 0x65
ata5.00: failed command: READ DMA
ata5.00: cmd c8/00:08:c8:f3:4f/00:00:00:00:00/ee tag 0 dma 4096 in
res d0/d0:d0:d0:d0:d0/00:00:00:00:00/d0 Emask 0x2 (HSM violation)
ata5.00: status: { Busy }
ata5.00: error: { ICRC UNC IDNF }
usb 6-5: New USB device found, idVendor=1532, idProduct=0202
usb 6-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
ata5: soft resetting link
usb 6-5: Product: Razer DeathStalker
usb 6-5: Manufacturer: Razer
input: Razer Razer DeathStalker as /devices/pci0000:00/0000:00:12.0/usb6/6-5/6-5:1.0/0003:1532:0202.0004/input/input9
hid-generic 0003:1532:0202.0004: input,hidraw3: USB HID v1.11 Keyboard [Razer Razer DeathStalker] on usb-0000:00:12.0-5/input0
input: Razer Razer DeathStalker as /devices/pci0000:00/0000:00:12.0/usb6/6-5/6-5:1.1/0003:1532:0202.0005/input/input10
hid-generic 0003:1532:0202.0005: input,hidraw4: USB HID v1.11 Keyboard [Razer Razer DeathStalker] on usb-0000:00:12.0-5/input1
input: Razer Razer DeathStalker as /devices/pci0000:00/0000:00:12.0/usb6/6-5/6-5:1.2/0003:1532:0202.0006/input/input11
hid-generic 0003:1532:0202.0006: input,hidraw5: USB HID v1.11 Mouse [Razer Razer DeathStalker] on usb-0000:00:12.0-5/input2
ata5.00: configured for UDMA/100
ata5.01: configured for UDMA/66
ata5: EH complete
random: nonblocking pool is initialized
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
scsi 9:0:0:0: Direct-Access Seagate Portable 0130 PQ: 0 ANSI: 4
sd 9:0:0:0: Attached scsi generic sg4 type 0
sd 9:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 9:0:0:0: [sdc] Write Protect is off
sd 9:0:0:0: [sdc] Mode Sense: 2f 08 00 00
sd 9:0:0:0: [sdc] No Caching mode page found
sd 9:0:0:0: [sdc] Assuming drive cache: write back
sdc: sdc1
sd 9:0:0:0: [sdc] Attached SCSI disk
clocksource: Switched to clocksource tsc
systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
systemd[1]: Failed to insert module 'kdbus': Function not implemented
systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Created slice Root Slice.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Created slice system-getty.slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Started Braille Device Support.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Mounting Debug File System...
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Started Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Journal Service.
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
systemd-journald[273]: Received request to flush runtime journal from PID 1
ATK0110 ATK0110:00: EC enabled
ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\_SB_.PCI0.SBRG.ASOC.SMRG) (20150619/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
wmi: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
ata5: drained 65536 bytes to clear DRQ
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: BMDMA stat 0x65
ata5.00: failed command: READ DMA
ata5.00: cmd c8/00:08:c8:f3:4f/00:00:00:00:00/ee tag 0 dma 4096 in
res d0/d0:d0:d0:d0:d0/00:00:00:00:00/d0 Emask 0x2 (HSM violation)
ata5.00: status: { Busy }
ata5.00: error: { ICRC UNC IDNF }
ata5: soft resetting link
[drm] Initialized drm 1.1.0 20060810
ata5.00: configured for UDMA/100
ata5.01: configured for UDMA/66
ata5: EH complete
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
snd_hda_intel 0000:05:00.1: Disabling MSI
snd_hda_intel 0000:05:00.1: Handle VGA-switcheroo audio client
snd_hda_codec_via hdaudioC0D0: autoconfig for VT1818S: line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line
snd_hda_codec_via hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_via hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_via hdaudioC0D0: dig-out=0x20/0x21
snd_hda_codec_via hdaudioC0D0: inputs:
snd_hda_codec_via hdaudioC0D0: Rear Mic=0x1a
snd_hda_codec_via hdaudioC0D0: Front Mic=0x1e
snd_hda_codec_via hdaudioC0D0: Line=0x1b
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input18
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input19
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card1/input20
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card1/input21
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card1/input22
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card1/input23
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
vgaarb: device changed decodes: PCI:0000:05:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
nvidia-nvlink: Nvlink Core is being initialized, major device number 246
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:05:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 358.16 Mon Nov 16 19:25:55 PST 2015
Adding 3904508k swap on /dev/sdb5. Priority:-1 extents:1 across:3904508k FS
audit: type=1400 audit(1448895341.868:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=516 comm="apparmor_parser"
audit: type=1400 audit(1448895341.868:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=516 comm="apparmor_parser"
audit: type=1400 audit(1448895342.056:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=516 comm="apparmor_parser"
audit: type=1400 audit(1448895342.056:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=516 comm="apparmor_parser"
audit: type=1400 audit(1448895342.056:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=516 comm="apparmor_parser"
audit: type=1400 audit(1448895342.056:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=516 comm="apparmor_parser"
audit: type=1400 audit(1448895342.268:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=516 comm="apparmor_parser"
audit: type=1400 audit(1448895342.268:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=516 comm="apparmor_parser"
audit: type=1400 audit(1448895342.268:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=516 comm="apparmor_parser"
audit: type=1400 audit(1448895342.268:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=516 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
r8169 0000:01:00.0 enp1s0: link down
r8169 0000:01:00.0 enp1s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 358.16 Mon Nov 16 18:58:09 PST 2015
nvidia-modeset: Allocated GPU:0 (GPU-13c14026-54c8-393e-61ce-db74cac3dba0) @ PCI:0000:05:00.0
r8169 0000:01:00.0 enp1s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
usb 4-3: new high-speed USB device number 3 using ehci-pci
usb 4-3: New USB device found, idVendor=18a5, idProduct=0302
usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-3: Product: STORE N GO
usb 4-3: Manufacturer: Verbatim
usb 4-3: SerialNumber: 07BA1C01B25A4295
usb-storage 4-3:1.0: USB Mass Storage device detected
scsi host10: usb-storage 4-3:1.0
scsi 10:0:0:0: Direct-Access Verbatim STORE N GO 5.00 PQ: 0 ANSI: 0 CCS
sd 10:0:0:0: Attached scsi generic sg5 type 0
sd 10:0:0:0: [sdd] 31277056 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 10:0:0:0: [sdd] Write Protect is off
sd 10:0:0:0: [sdd] Mode Sense: 23 00 00 00
sd 10:0:0:0: [sdd] No Caching mode page found
sd 10:0:0:0: [sdd] Assuming drive cache: write through
sdd: sdd1
sd 10:0:0:0: [sdd] Attached SCSI removable disk
FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
sdd: sdd1
FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
sdd: sdd1
usb 4-3: USB disconnect, device number 3