dmesg - mgbkj
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.0-30-generic (buildd@lgw01-13) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #33-Ubuntu SMP Mon Sep 21 20:58:04 UTC 2015 (Ubuntu 3.19.0-30.33-generic 3.19.8-ckt6)
Command line: BOOT_IMAGE=lenovotest/casper/vmlinuz root=/dev/nfs boot=casper netboot=nfs nfsroot=192.168.10.2:/tftpboot/lenovotest initrd=lenovotest/casper/initrd.gz quiet splash --
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007fcaffff] usable
BIOS-e820: [mem 0x000000007fcb0000-0x00000000810affff] reserved
BIOS-e820: [mem 0x00000000810b0000-0x0000000085abefff] usable
BIOS-e820: [mem 0x0000000085abf000-0x0000000085ebefff] reserved
BIOS-e820: [mem 0x0000000085ebf000-0x0000000085fbefff] ACPI NVS
BIOS-e820: [mem 0x0000000085fbf000-0x0000000085ffefff] ACPI data
BIOS-e820: [mem 0x0000000085fff000-0x0000000085ffffff] usable
BIOS-e820: [mem 0x0000000086000000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000026effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: LENOVO 20217/20217, BIOS 74CN35WW(V1.10) 07/18/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x26f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-combining
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7F80000000 write-back
1 base 0080000000 mask 7FFC000000 write-back
2 base 0084000000 mask 7FFE000000 write-back
3 base 00FF800000 mask 7FFF800000 write-protect
4 base 0100000000 mask 7F00000000 write-back
5 base 0200000000 mask 7F80000000 write-back
6 base 026F000000 mask 7FFF000000 uncachable
7 base 0270000000 mask 7FF0000000 uncachable
8 disabled
9 disabled
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
e820: last_pfn = 0x86000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
BRK [0x01fe7000, 0x01fe7fff] PGTABLE
init_memory_mapping: [mem 0x26ee00000-0x26effffff]
[mem 0x26ee00000-0x26effffff] page 2M
BRK [0x01fe8000, 0x01fe8fff] PGTABLE
init_memory_mapping: [mem 0x260000000-0x26edfffff]
[mem 0x260000000-0x26edfffff] page 2M
init_memory_mapping: [mem 0x240000000-0x25fffffff]
[mem 0x240000000-0x25fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x7fcaffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x7fbfffff] page 2M
[mem 0x7fc00000-0x7fcaffff] page 4k
init_memory_mapping: [mem 0x810b0000-0x85abefff]
[mem 0x810b0000-0x811fffff] page 4k
[mem 0x81200000-0x859fffff] page 2M
[mem 0x85a00000-0x85abefff] page 4k
BRK [0x01fe9000, 0x01fe9fff] PGTABLE
BRK [0x01fea000, 0x01feafff] PGTABLE
init_memory_mapping: [mem 0x85fff000-0x85ffffff]
[mem 0x85fff000-0x85ffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x23fffffff]
[mem 0x100000000-0x23fffffff] page 1G
RAMDISK: [mem 0x7df06000-0x7fcaffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
ACPI: XSDT 0x0000000085FFE210 0000AC (v01 LENOVO CB-01 00000001 01000013)
ACPI: FACP 0x0000000085FF7000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: DSDT 0x0000000085FE9000 00AFEA (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: FACS 0x0000000085FBA000 000040
ACPI: SLIC 0x0000000085FFD000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: UEFI 0x0000000085FFC000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: FPDT 0x0000000085FFA000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: ASF! 0x0000000085FF8000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: HPET 0x0000000085FF6000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: APIC 0x0000000085FF5000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: MCFG 0x0000000085FF4000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x0000000085FE8000 000818 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: BOOT 0x0000000085FE6000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: ASPT 0x0000000085FE4000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: DBGP 0x0000000085FE3000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x0000000085FDD000 000539 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x0000000085FDC000 000AD8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x0000000085FD8000 00309E (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x0000000085FD4000 0011F2 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: DMAR 0x0000000085FD6000 000070 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000026effffff]
NODE_DATA(0) allocated [mem 0x26eff7000-0x26effbfff]
[ffffea0000000000-ffffea0009bfffff] PMD -> [ffff880266800000-ffff88026e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x26effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0x7fcaffff]
node 0: [mem 0x810b0000-0x85abefff]
node 0: [mem 0x85fff000-0x85ffffff]
node 0: [mem 0x100000000-0x26effffff]
Initmem setup node 0 [mem 0x00001000-0x26effffff]
On node 0 totalpages: 2045532
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 8411 pages used for memmap
DMA32 zone: 538304 pages, LIFO batch:31
Normal zone: 23488 pages used for memmap
Normal zone: 1503232 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x7fcb0000-0x810affff]
PM: Registered nosave memory: [mem 0x85abf000-0x85ebefff]
PM: Registered nosave memory: [mem 0x85ebf000-0x85fbefff]
PM: Registered nosave memory: [mem 0x85fbf000-0x85ffefff]
PM: Registered nosave memory: [mem 0x86000000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
e820: [mem 0x90000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88026ec00000 s87104 r8192 d31680 u262144
pcpu-alloc: s87104 r8192 d31680 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2013548
Policy zone: Normal
Kernel command line: BOOT_IMAGE=lenovotest/casper/vmlinuz root=/dev/nfs boot=casper netboot=nfs nfsroot=192.168.10.2:/tftpboot/lenovotest initrd=lenovotest/casper/initrd.gz quiet splash --
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at /build/linux-aY9Y6L/linux-3.19.0/drivers/iommu/dmar.c:829 warn_invalid_dmar+0x7c/0x90()
Your BIOS is broken; DMAR reported at address 0!
BIOS vendor: LENOVO; Ver: 74CN35WW(V1.10); Product Version: Lenovo IdeaPad Y510P
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 3.19.0-30-generic #33-Ubuntu
Hardware name: LENOVO 20217/20217, BIOS 74CN35WW(V1.10) 07/18/2013
ffffffff81b0f858 ffffffff81c03d18 ffffffff817c4d4f 0000000000000a04
ffffffff81c03d68 ffffffff81c03d58 ffffffff81076a8a 0000000000001000
0000000000000000 ffffffff81acb8fe ffffffff81fe4008 ffffffff81fe4034
Call Trace:
[] dump_stack+0x45/0x57
[] warn_slowpath_common+0x8a/0xc0
[] warn_slowpath_fmt_taint+0x3f/0x50
[] ? __acpi_map_table+0x13/0x18
[] ? acpi_os_map_iomem+0x27/0x153
[] warn_invalid_dmar+0x7c/0x90
[] ? acpi_os_map_memory+0xe/0x10
[] dmar_validate_one_drhd+0xcc/0xf0
[] dmar_walk_remapping_entries+0x92/0x1d0
[] detect_intel_iommu+0x52/0xd1
[] ? xen_swiotlb_init+0x4b0/0x4b0
[] pci_iommu_alloc+0x4b/0x6e
[] mem_init+0x17/0x9d
[] start_kernel+0x246/0x494
[] ? early_idt_handler_array+0x120/0x120
[] x86_64_start_reservations+0x2a/0x2c
[] x86_64_start_kernel+0x143/0x152
---[ end trace ab1150ce1fa29e24 ]---
Memory: 7939012K/8182128K available (8004K kernel code, 1234K rwdata, 3764K rodata, 1408K init, 1300K bss, 243116K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:488 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2394.479 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.95 BogoMIPS (lpj=9577916)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 32K (ffffffff81e96000 - ffffffff81e9e000)
ftrace: allocating 30120 entries in 118 pages
dmar: Host address width 39
dmar: DRHD base: 0x00000000000000 flags: 0x1
dmar: parse DMAR table failure.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz (fam: 06, model: 3c, stepping: 03)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (38311.66 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x85ebf000-0x85fbefff] (1048576 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 10:21:59, date: 11/20/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880265374000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802652BA800 0005AA (v01 PmRef ApIst 00003000 INTL 20130117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802652D3400 000119 (v01 PmRef ApCst 00003000 INTL 20130117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xfeafffff]
pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:01.1: [8086:0c05] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xd5200000-0xd520ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xd5214000-0xd521400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xd5219000-0xd52193ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xd5210000-0xd5213fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xd5218000-0xd52183ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x6048-0x604f]
pci 0000:00:1f.2: reg 0x14: [io 0x6054-0x6057]
pci 0000:00:1f.2: reg 0x18: [io 0x6040-0x6047]
pci 0000:00:1f.2: reg 0x1c: [io 0x6050-0x6053]
pci 0000:00:1f.2: reg 0x20: [io 0x6020-0x603f]
pci 0000:00:1f.2: reg 0x24: [mem 0xd5217000-0xd52177ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xd5215000-0xd52150ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x6000-0x601f]
pci 0000:01:00.0: [10de:0fe4] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd3000000-0xd3ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0x5000-0x507f]
pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xd4000000-0xd4003fff]
pci 0000:00:01.0: PCI bridge to [bus 01-06]
pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:01.0: bridge window [mem 0xd3000000-0xd4ffffff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
pci 0000:07:00.0: [10de:0fe4] type 00 class 0x030200
pci 0000:07:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
pci 0000:07:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:07:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:07:00.0: reg 0x24: [io 0x4000-0x407f]
pci 0000:07:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
pci 0000:00:01.1: PCI bridge to [bus 07]
pci 0000:00:01.1: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.1: bridge window [mem 0xd2000000-0xd2ffffff]
pci 0000:00:01.1: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 08]
pci 0000:09:00.0: [1969:10a1] type 00 class 0x020000
pci 0000:09:00.0: reg 0x10: [mem 0xd5100000-0xd513ffff 64bit]
pci 0000:09:00.0: reg 0x18: [io 0x3000-0x307f]
pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 09]
pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.3: bridge window [mem 0xd5100000-0xd51fffff]
pci 0000:0a:00.0: [8086:0888] type 00 class 0x028000
pci 0000:0a:00.0: reg 0x10: [mem 0xd5000000-0xd5001fff 64bit]
pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 0a]
pci 0000:00:1c.4: bridge window [mem 0xd5000000-0xd50fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 6 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
e820: reserve RAM buffer [mem 0x7fcb0000-0x7fffffff]
e820: reserve RAM buffer [mem 0x85abf000-0x87ffffff]
e820: reserve RAM buffer [mem 0x86000000-0x87ffffff]
e820: reserve RAM buffer [mem 0x26f000000-0x26fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x0400-0x0453] has been reserved
system 00:00: [io 0x0800-0x08fe] has been reserved
system 00:00: [io 0x0900-0x09fe] has been reserved
system 00:00: [io 0x0a00-0x0afe] has been reserved
system 00:00: [io 0x0b00-0x0bfe] has been reserved
system 00:00: [io 0x1800-0x18fe] could not be reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: [io 0x0d60-0x0d63] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x1854-0x1857] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs ETD060b PNP0f13 (active)
pnp 00:05: disabling [mem 0xffffffff-0x100000ffe] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
pnp 00:05: disabling [mem 0xffffffff-0x100000ffe disabled] because it overlaps 0000:07:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: [mem 0x90010000-0x90010fff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 6 devices
pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
pci 0000:07:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
pci 0000:01:00.0: BAR 6: assigned [mem 0xd4080000-0xd40fffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-06]
pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:01.0: bridge window [mem 0xd3000000-0xd4ffffff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
pci 0000:07:00.0: BAR 6: no space for [mem size 0x00080000 pref]
pci 0000:07:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
pci 0000:00:01.1: PCI bridge to [bus 07]
pci 0000:00:01.1: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.1: bridge window [mem 0xd2000000-0xd2ffffff]
pci 0000:00:01.1: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 08]
pci 0000:00:1c.3: PCI bridge to [bus 09]
pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.3: bridge window [mem 0xd5100000-0xd51fffff]
pci 0000:00:1c.4: PCI bridge to [bus 0a]
pci 0000:00:1c.4: bridge window [mem 0xd5000000-0xd50fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x90000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:01: resource 1 [mem 0xd3000000-0xd4ffffff]
pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:07: resource 1 [mem 0xd2000000-0xd2ffffff]
pci_bus 0000:07: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:09: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:09: resource 1 [mem 0xd5100000-0xd51fffff]
pci_bus 0000:0a: resource 1 [mem 0xd5000000-0xd50fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
pci 0000:09:00.0: set MSI_INTX_DISABLE_BUG flag
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 30376K (ffff88007df06000 - ffff88007fcb0000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x81abf000-0x85abf000] (64MB) mapped at [ffff880081abf000-ffff880085abefff]
Simple Boot Flag at 0x44 set to 0x1
RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x7
microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x7
microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x7
microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x7
microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x7
microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x7
microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x7
microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x7
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1448014919.016:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:01.1: Signaling PME through PCIe PME interrupt
pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:0a:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
tsc: Refined TSC clocksource calibration: 2394.455 MHz
Switched to clocksource tsc
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (0 C)
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT1] (battery present)
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.19.0-30-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.19.0-30-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xd5219000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.19.0-30-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xd5218000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 3.19.0-30-generic ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS1] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
Consider also installing thermald for improved thermal control.
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
ACPI PCC probe failed.
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 091db276173d833742e96ac870591adb9bccda53'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 7:416:376
acpi LNXVIDEO:02: hash matches
rtc_cmos 00:01: setting system clock to 2015-11-20 10:22:02 UTC (1448014922)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1408K (ffffffff81d36000 - ffffffff81e96000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 176K (ffff8800017d4000 - ffff880001800000)
Freeing unused kernel memory: 332K (ffff880001bad000 - ffff880001c00000)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
random: systemd-udevd urandom read with 22 bits of entropy available
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
ahci 0000:00:1f.2: version 3.0
alx 0000:09:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [28:d2:44:20:07:d1]
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x20 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
acpi device:4c: registered as cooling_device8
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: DUMMY
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xd5217000 port 0xd5217380 irq 30
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4b/LNXVIDEO:00/input/input7
[Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
MXM: GUID detected in BIOS
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0e7240a2
nouveau [ DEVICE][0000:01:00.0] Chipset: GK107 (NVE7)
nouveau [ DEVICE][0000:01:00.0] Family : NVE0
nouveau [ VBIOS][0000:01:00.0] using image from ACPI
nouveau [ VBIOS][0000:01:00.0] BIT signature found
nouveau [ VBIOS][0000:01:00.0] version 80.07.9d.00.3c
nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
nouveau [ PFB][0000:01:00.0] RAM type: GDDR5
nouveau [ PFB][0000:01:00.0] RAM size: 2048 MiB
nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
nouveau [ VOLT][0000:01:00.0] GPU voltage: 600000uv
nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
nouveau [ PTHERM][0000:01:00.0] fan management: automatic
nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
nouveau [ CLK][0000:01:00.0] 07: core 405 MHz memory 810 MHz
nouveau [ CLK][0000:01:00.0] 0a: core 405-1058 MHz memory 1600 MHz
nouveau [ CLK][0000:01:00.0] 0f: core 405-1058 MHz memory 5000 MHz
nouveau [ CLK][0000:01:00.0] --: core 405 MHz memory 810 MHz
nouveau E[ PBUS][0000:01:00.0] MMIO read of 0x00000000 FAULT at 0x10a100 [ IBUS ]
[TTM] Zone kernel: Available graphics memory: 3985668 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 2048 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 04000fb6 0f420010
nouveau [ DRM] DCB outp 01: 08011f82 00020010
nouveau [ DRM] DCB outp 02: 02044f00 00000000
nouveau [ DRM] DCB conn 00: 00020047
nouveau [ DRM] DCB conn 01: 01000161
nouveau [ DRM] DCB conn 04: 00000400
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau [ DRM] MM: using COPY for buffer copies
usb 1-1: new high-speed USB device number 2 using xhci_hcd
usb 3-1: new high-speed USB device number 2 using ehci-pci
usb 4-1: new high-speed USB device number 2 using ehci-pci
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR20002, max UDMA/100
ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata6.00: configured for UDMA/100
scsi 5:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0002 PQ: 0 ANSI: 5
sd 5:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 5:0:0:0: [sda] 4096-byte physical blocks
sd 5:0:0:0: Attached scsi generic sg0 type 0
sd 5:0:0:0: [sda] Write Protect is off
sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 5:0:0:0: [sda] Attached SCSI disk
usb 3-1: New USB device found, idVendor=8087, idProduct=8008
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 6 ports detected
usb 4-1: New USB device found, idVendor=8087, idProduct=8000
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 8 ports detected
nouveau E[ PBUS][0000:01:00.0] MMIO write of 0x00000000 FAULT at 0x418880 [ IBUS ]
nouveau E[ PIBUS][0000:01:00.0] GPC0: 0x419eb4 0xbadf1000 (0x3800820c)
nouveau E[ PIBUS][0000:01:00.0] HUB0: 0x404170 0x00000012 (0x0e008201)
usb 1-1: New USB device found, idVendor=174f, idProduct=1474
usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-1: Product: Lenovo EasyCamera
usb 1-1: Manufacturer: Lenovo EasyCamera
usb 1-1: SerialNumber: Lenovo EasyCamera
usb 1-7: new full-speed USB device number 3 using xhci_hcd
psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x461f01)
psmouse serio1: elantech: Synaptics capabilities query result 0x50, 0x15, 0x0e.
usb 1-7: New USB device found, idVendor=8087, idProduct=07da
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
nouveau E[ PGRAPH][0000:01:00.0] HUB_INIT timed out
nouveau E[ PGRAPH][0000:01:00.0] 409000 - done 0x00000204
nouveau E[ PGRAPH][0000:01:00.0] 409000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
nouveau E[ PGRAPH][0000:01:00.0] 409000 - stat 0x00000000 0x00000000 0x00000002 0x00000009
nouveau E[ PGRAPH][0000:01:00.0] 502000 - done 0x00000300
nouveau E[ PGRAPH][0000:01:00.0] 502000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
nouveau E[ PGRAPH][0000:01:00.0] 502000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
nouveau E[ PGRAPH][0000:01:00.0] init failed, -16
nouveau [ DRM] allocated 1920x1080 fb: 0x60000, bo ffff88026091a400
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:01:00.0: registered panic notifier
[drm] Initialized nouveau 1.2.1 20120801 for 0000:01:00.0 on minor 0
nouveau 0000:07:00.0: enabling device (0006 -> 0007)
nouveau [ DEVICE][0000:07:00.0] BOOT0 : 0x0e7240a2
nouveau [ DEVICE][0000:07:00.0] Chipset: GK107 (NVE7)
nouveau [ DEVICE][0000:07:00.0] Family : NVE0
nouveau [ VBIOS][0000:07:00.0] using image from PROM
nouveau [ VBIOS][0000:07:00.0] BIT signature found
nouveau [ VBIOS][0000:07:00.0] version 80.07.9d.00.3d
nouveau [ DEVINIT][0000:07:00.0] adaptor not initialised
nouveau [ VBIOS][0000:07:00.0] running init tables
nouveau [ PMC][0000:07:00.0] MSI interrupts enabled
nouveau [ PFB][0000:07:00.0] RAM type: GDDR5
nouveau [ PFB][0000:07:00.0] RAM size: 2048 MiB
nouveau [ PFB][0000:07:00.0] ZCOMP: 0 tags
nouveau [ VOLT][0000:07:00.0] GPU voltage: 600000uv
nouveau [ PTHERM][0000:07:00.0] FAN control: none / external
nouveau [ PTHERM][0000:07:00.0] fan management: automatic
nouveau [ PTHERM][0000:07:00.0] internal sensor: yes
nouveau [ CLK][0000:07:00.0] 07: core 405 MHz memory 810 MHz
nouveau [ CLK][0000:07:00.0] 0a: core 405-1058 MHz memory 1600 MHz
nouveau [ CLK][0000:07:00.0] 0f: core 405-1058 MHz memory 5000 MHz
nouveau [ CLK][0000:07:00.0] --: core 405 MHz memory 810 MHz
nouveau E[ PBUS][0000:07:00.0] MMIO write of 0x00000002 FAULT at 0x4188ac [ IBUS ]
nouveau [ DRM] VRAM: 2048 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 01: 08011f82 00020010
nouveau [ DRM] DCB outp 02: 02044f00 00000000
nouveau [ DRM] DCB conn 01: 01000161
nouveau [ DRM] DCB conn 04: 00000400
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau [ DRM] MM: using COPY for buffer copies
[drm] Initialized nouveau 1.2.1 20120801 for 0000:07:00.0 on minor 1
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
alx 0000:09:00.0 eth0: NIC Up: 1 Gbps Full
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
squashfs: version 4.0 (2009/01/31) Phillip Lougher
random: nonblocking pool is initialized
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: [/lib/systemd/system/casper.service:10] Failed to parse input specifier, ignoring: force-tty
systemd[1]: Unit rofs.mount is bound to inactive unit dev-loop0.device. Stopping, too.
systemd[1]: Startup finished in 8.481s (kernel) + 198ms (userspace) = 8.679s.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Starting Remote File Systems (Pre).
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting User and Session Slice.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Starting Journal Audit Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounted VMware vmblock fuse mount.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting system-getty.slice.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Mounting Debug File System...
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Read required files in advance...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Started Braille Device Support.
systemd[1]: Starting Braille Device Support...
systemd[1]: Starting Nameserver information manager...
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
lp: driver loaded but no devices found
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Started Remount Root and Kernel File Systems.
systemd[1]: Started Increase datagram queue length.
ppdev: user-space parallel port driver
systemd[1]: Started Nameserver information manager.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Various fixups to make systemd work better on Debian...
systemd[1]: Started Rebuild Hardware Database.
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Starting udev Wait for Complete Device Initialization...
systemd[1]: Started Load/Save Random Seed.
systemd[1]: Started Various fixups to make systemd work better on Debian.
systemd[1]: Started Load Kernel Modules.
systemd[1]: Mounted Configuration File System.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started udev Kernel Device Manager.
systemd[1]: Starting Show Plymouth Boot Screen...
systemd[1]: Started Journal Service.
systemd-journald[457]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 3.0.0
EDAC ie31200: No ECC support
input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input8
cfg80211: Calling CRDA to update world regulatory domain
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003- 2014 Intel Corporation
iwlwifi 0000:0a:00.0: can't disable ASPM; OS doesn't have ASPM control
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
usbcore: registered new interface driver btusb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
kvm: disabled by bios
sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: dig-out=0x1e/0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Mic=0x18
sound hdaudioC0D0: Internal Mic=0x12
iwlwifi 0000:0a:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (174f:1474)
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/input/input11
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:0a:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
iwlwifi 0000:0a:00.0: L1 Enabled - LTR Disabled
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
cgroup: new mount options do not match the existing superblock, will be ignored
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
nouveau E[ PBUS][0000:07:00.0] MMIO write of 0x00000000 FAULT at 0x418880 [ IBUS ]
nouveau E[ PIBUS][0000:07:00.0] GPC0: 0x419eb4 0xbadf1000 (0x3800820c)
nouveau E[ PBUS][0000:07:00.0] MMIO write of 0x3f800000 FAULT at 0x405804 [ IBUS ]
nouveau E[ PIBUS][0000:07:00.0] HUB0: 0x404170 0x00000012 (0x0e008201)
nouveau E[ PGRAPH][0000:07:00.0] HUB_INIT timed out
nouveau E[ PGRAPH][0000:07:00.0] 409000 - done 0x00000204
nouveau E[ PGRAPH][0000:07:00.0] 409000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
nouveau E[ PGRAPH][0000:07:00.0] 409000 - stat 0x00000000 0x00000000 0x00000002 0x00000009
nouveau E[ PGRAPH][0000:07:00.0] 502000 - done 0x00000300
nouveau E[ PGRAPH][0000:07:00.0] 502000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
nouveau E[ PGRAPH][0000:07:00.0] 502000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
nouveau E[ PGRAPH][0000:07:00.0] init failed, -16
nouveau E[ PBUS][0000:01:00.0] MMIO write of 0x00000000 FAULT at 0x418880 [ IBUS ]
nouveau E[ PIBUS][0000:01:00.0] GPC0: 0x419eb4 0xbadf1000 (0x3800820c)
nouveau E[ PIBUS][0000:01:00.0] HUB0: 0x404170 0x00000012 (0x0e008201)
nouveau E[ PGRAPH][0000:01:00.0] HUB_INIT timed out
nouveau E[ PGRAPH][0000:01:00.0] 409000 - done 0x00000204
nouveau E[ PGRAPH][0000:01:00.0] 409000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
nouveau E[ PGRAPH][0000:01:00.0] 409000 - stat 0x00000000 0x00000000 0x00000002 0x00000009
nouveau E[ PGRAPH][0000:01:00.0] 502000 - done 0x00000300
nouveau E[ PGRAPH][0000:01:00.0] 502000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
nouveau E[ PGRAPH][0000:01:00.0] 502000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
nouveau E[ PGRAPH][0000:01:00.0] init failed, -16
iwlwifi 0000:0a:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
iwlwifi 0000:0a:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
mce: [Hardware Error]: Machine check events logged
CPU2: Core temperature above threshold, cpu clock throttled (total events = 5)
CPU3: Core temperature above threshold, cpu clock throttled (total events = 5)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 7)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 7)
CPU6: Package temperature above threshold, cpu clock throttled (total events = 7)
CPU4: Package temperature above threshold, cpu clock throttled (total events = 7)
CPU7: Package temperature above threshold, cpu clock throttled (total events = 7)
CPU5: Package temperature above threshold, cpu clock throttled (total events = 7)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 7)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 7)
CPU3: Core temperature/speed normal
CPU2: Core temperature/speed normal
CPU0: Package temperature/speed normal
CPU7: Package temperature/speed normal
CPU6: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU5: Package temperature/speed normal
CPU4: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU3: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU4: Core temperature above threshold, cpu clock throttled (total events = 46)
CPU5: Core temperature above threshold, cpu clock throttled (total events = 46)
CPU5: Core temperature/speed normal
CPU4: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
perf interrupt took too long (2524 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
CPU1: Package temperature above threshold, cpu clock throttled (total events = 30558)
CPU4: Package temperature above threshold, cpu clock throttled (total events = 30558)
CPU7: Package temperature above threshold, cpu clock throttled (total events = 30558)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 30558)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 30558)
CPU5: Package temperature above threshold, cpu clock throttled (total events = 30558)
CPU6: Package temperature above threshold, cpu clock throttled (total events = 30558)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 30558)
CPU3: Package temperature/speed normal
CPU4: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU7: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU5: Package temperature/speed normal
CPU6: Package temperature/speed normal
CPU1: Package temperature/speed normal