dmesg - 87
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.0-30-generic (buildd@lgw01-13) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #33-Ubuntu SMP Mon Sep 21 20:58:04 UTC 2015 (Ubuntu 3.19.0-30.33-generic 3.19.8-ckt6)
Command line: BOOT_IMAGE=lenovotest/casper/vmlinuz root=/dev/nfs boot=casper netboot=nfs nfsroot=192.168.10.2:/tftpboot/lenovotest initrd=lenovotest/casper/initrd.gz quiet splash --
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
BIOS-e820: [mem 0x0000000040200000-0x00000000b8299fff] usable
BIOS-e820: [mem 0x00000000b829a000-0x00000000b849bfff] reserved
BIOS-e820: [mem 0x00000000b849c000-0x00000000c75cefff] usable
BIOS-e820: [mem 0x00000000c75cf000-0x00000000caeeefff] reserved
BIOS-e820: [mem 0x00000000caeef000-0x00000000caf9efff] ACPI NVS
BIOS-e820: [mem 0x00000000caf9f000-0x00000000caffefff] ACPI data
BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
BIOS-e820: [mem 0x00000000cb000000-0x00000000cf9fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000012f5fffff] usable
BIOS-e820: [mem 0x000000012f600000-0x000000012f7fffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: LENOVO 20157/Emerald Lake 2, BIOS 62CN40WW 07/27/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x12f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFC00000 mask FFFC00000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 0C0000000 mask FE0000000 write-back
4 base 0D0000000 mask FF0000000 uncachable
5 base 0CC000000 mask FFC000000 uncachable
6 base 0CB000000 mask FFF000000 uncachable
7 base 100000000 mask FE0000000 write-back
8 base 120000000 mask FF0000000 write-back
9 base 12F800000 mask FFF800000 uncachable
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f0130-0x000f013f] mapped at [ffff8800000f0130]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
reserving inaccessible SNB gfx pages
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
BRK [0x01fe7000, 0x01fe7fff] PGTABLE
init_memory_mapping: [mem 0x12f400000-0x12f5fffff]
[mem 0x12f400000-0x12f5fffff] page 2M
BRK [0x01fe8000, 0x01fe8fff] PGTABLE
init_memory_mapping: [mem 0x120000000-0x12f3fffff]
[mem 0x120000000-0x12f3fffff] page 2M
init_memory_mapping: [mem 0x100000000-0x11fffffff]
[mem 0x100000000-0x11fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x1fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x1fffffff] page 2M
init_memory_mapping: [mem 0x20200000-0x3fffffff]
[mem 0x20200000-0x3fffffff] page 2M
init_memory_mapping: [mem 0x40200000-0xb8299fff]
[mem 0x40200000-0xb81fffff] page 2M
[mem 0xb8200000-0xb8299fff] page 4k
BRK [0x01fe9000, 0x01fe9fff] PGTABLE
BRK [0x01fea000, 0x01feafff] PGTABLE
init_memory_mapping: [mem 0xb849c000-0xc75cefff]
[mem 0xb849c000-0xb85fffff] page 4k
[mem 0xb8600000-0xc73fffff] page 2M
[mem 0xc7400000-0xc75cefff] page 4k
init_memory_mapping: [mem 0xcafff000-0xcaffffff]
[mem 0xcafff000-0xcaffffff] page 4k
RAMDISK: [mem 0x7e256000-0x7fffffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0150 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000CAFFE170 000094 (v01 LENOVO CB-01 00000001 LENO 00000001)
ACPI: FACP 0x00000000CAFED000 0000F4 (v03 LENOVO CB-01 00000001 LENO 00000001)
ACPI: DSDT 0x00000000CAFF0000 00A4AF (v02 LENOVO IVB-CPT 00000000 INTL 20061109)
ACPI: FACS 0x00000000CAF7C000 000040
ACPI: FACS 0x00000000CAF7C000 000040
ACPI: SLIC 0x00000000CAFFD000 000176 (v01 LENOVO CB-01 00000001 LENO 00000001)
ACPI: SSDT 0x00000000CAFFB000 001068 (v01 LENOVO PtidDevc 00001000 INTL 20061109)
ACPI: ASF! 0x00000000CAFEF000 0000A5 (v32 LENOVO CB-01 00000001 LENO 00000001)
ACPI: HPET 0x00000000CAFEC000 000038 (v01 LENOVO CB-01 00000001 LENO 00000001)
ACPI: APIC 0x00000000CAFEB000 000098 (v01 LENOVO CB-01 00000001 LENO 00000001)
ACPI: MCFG 0x00000000CAFEA000 00003C (v01 LENOVO CB-01 00000001 LENO 00000001)
ACPI: SSDT 0x00000000CAFE9000 000926 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 0x00000000CAFE8000 000A92 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: UEFI 0x00000000CAFE7000 00003E (v01 LENOVO CB-01 00000001 LENO 00000001)
ACPI: UEFI 0x00000000CAFE6000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
ACPI: POAT 0x00000000CAFE5000 000055 (v03 LENOVO CB-01 00000001 LENO 00000001)
ACPI: SSDT 0x00000000CAFE4000 00090B (v01 NvORef NvOptTbl 00001000 INTL 20061109)
ACPI: UEFI 0x00000000CAFE3000 000292 (v01 LENOVO CB-01 00000001 LENO 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000012f5fffff]
NODE_DATA(0) allocated [mem 0x12f5f6000-0x12f5fafff]
[ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012ac00000-ffff88012ebfffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x12f5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20200000-0x3fffffff]
node 0: [mem 0x40200000-0xb8299fff]
node 0: [mem 0xb849c000-0xc75cefff]
node 0: [mem 0xcafff000-0xcaffffff]
node 0: [mem 0x100000000-0x12f5fffff]
Initmem setup node 0 [mem 0x00001000-0x12f5fffff]
On node 0 totalpages: 1009002
DMA zone: 64 pages used for memmap
DMA zone: 156 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 12672 pages used for memmap
DMA32 zone: 810958 pages, LIFO batch:31
Normal zone: 3032 pages used for memmap
Normal zone: 194048 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xcba00000-0xcf9fffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 8 CPUs, 6 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
PM: Registered nosave memory: [mem 0xb829a000-0xb849bfff]
PM: Registered nosave memory: [mem 0xc75cf000-0xcaeeefff]
PM: Registered nosave memory: [mem 0xcaeef000-0xcaf9efff]
PM: Registered nosave memory: [mem 0xcaf9f000-0xcaffefff]
PM: Registered nosave memory: [mem 0xcb000000-0xcf9fffff]
PM: Registered nosave memory: [mem 0xcfa00000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
e820: [mem 0xcfa00000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88012f200000 s87104 r8192 d31680 u262144
pcpu-alloc: s87104 r8192 d31680 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 993078
Policy zone: Normal
Kernel command line: BOOT_IMAGE=lenovotest/casper/vmlinuz root=/dev/nfs boot=casper netboot=nfs nfsroot=192.168.10.2:/tftpboot/lenovotest initrd=lenovotest/casper/initrd.gz quiet splash --
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x3, cntxt size 0x240 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3855836K/4036008K available (8004K kernel code, 1234K rwdata, 3764K rodata, 1408K init, 1300K bss, 180172K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:488 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2095.284 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4190.56 BogoMIPS (lpj=8381136)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffff81e96000 - ffffffff81e9e000)
ftrace: allocating 30120 entries in 118 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Pentium(R) CPU B950 @ 2.10GHz (fam: 06, model: 2a, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
x86: Booting SMP configuration:
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (8381.13 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xcaeef000-0xcaf9efff] (720896 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 18:19:43, date: 10/30/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880129E61000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88012A895C00 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880129E11800 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:0106] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xeb000000-0xeb3fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xeb600000-0xeb60ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xeb615000-0xeb61500f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xeb619000-0xeb6193ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xeb610000-0xeb613fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xeb618000-0xeb6183ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
pci 0000:00:1f.2: reg 0x24: [mem 0xeb617000-0xeb6177ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xeb614000-0xeb6140ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:01:00.0: [10de:1058] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xea000000-0xeaffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xe7ffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xe8000000-0xe9ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0xea000000-0xeaffffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [14e4:4727] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xeb500000-0xeb503fff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xeb500000-0xeb5fffff]
pci 0000:04:00.0: [1969:1090] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [mem 0xeb400000-0xeb43ffff 64bit]
pci 0000:04:00.0: reg 0x18: [io 0x2000-0x207f]
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.3: bridge window [mem 0xeb400000-0xeb4fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 2 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
vgaarb: no bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xb829a000-0xbbffffff]
e820: reserve RAM buffer [mem 0xc75cf000-0xc7ffffff]
e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
e820: reserve RAM buffer [mem 0x12f600000-0x12fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x1000-0x100f] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x0400-0x0453] could not be reserved
system 00:00: [io 0x0458-0x047f] has been reserved
system 00:00: [io 0x0500-0x057f] has been reserved
system 00:00: [mem 0xfe800000-0xfe80ffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x0454-0x0457] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs ETD0605 ETD0001 PNP0f13 (active)
pnp 00:05: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0x20000000-0x201fffff] has been reserved
system 00:06: [mem 0x40000000-0x401fffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 7 devices
pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
pci 0000:01:00.0: BAR 6: no space for [mem size 0x00080000 pref]
pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0xea000000-0xeaffffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xeb500000-0xeb5fffff]
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.3: bridge window [mem 0xeb400000-0xeb4fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xea000000-0xeaffffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe9ffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xeb500000-0xeb5fffff]
pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:04: resource 1 [mem 0xeb400000-0xeb4fffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
pci 0000:04:00.0: set MSI_INTX_DISABLE_BUG flag
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 30376K (ffff88007e256000 - ffff880080000000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xc35cf000-0xc75cf000] (64MB) mapped at [ffff8800c35cf000-ffff8800c75cefff]
RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x26
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x26
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1446229183.720:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [ADP1] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZS0] (63 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZS1] (48 C)
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT0] (battery present)
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.19.0-30-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.19.0-30-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xeb619000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.19.0-30-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xeb618000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 3.19.0-30-generic ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
Consider also installing thermald for improved thermal control.
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
ACPI PCC probe failed.
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 091db276173d833742e96ac870591adb9bccda53'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 3:461:343
tty tty60: hash matches
rtc_cmos 00:01: setting system clock to 2015-10-30 18:19:44 UTC (1446229184)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1408K (ffffffff81d36000 - ffffffff81e96000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 176K (ffff8800017d4000 - ffff880001800000)
Freeing unused kernel memory: 332K (ffff880001bad000 - ffff880001c00000)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
random: systemd-udevd urandom read with 2 bits of entropy available
[drm] Initialized drm 1.1.0 20060810
[drm] Memory usable by graphics device = 2048M
[drm] Replacing VGA console driver
Console: switching to colour dummy device 80x25
alx 0000:04:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [3c:97:0e:27:70:6a]
wmi: Mapper loaded
ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
i915 0000:00:02.0: optimus capabilities: enabled, status dynamic power,
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power,
VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
nouveau 0000:01:00.0: enabling device (0004 -> 0007)
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20141107/video-1230)
ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:39/LNXVIDEO:00/input/input6
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7
[drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0
ahci 0000:00:1f.2: version 3.0
nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0d9180a1
nouveau [ DEVICE][0000:01:00.0] Chipset: GF119 (NVD9)
nouveau [ DEVICE][0000:01:00.0] Family : NVC0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
fbcon: inteldrmfb (fb0) is primary device
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x12 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
nouveau [ VBIOS][0000:01:00.0] using image from ACPI
nouveau [ VBIOS][0000:01:00.0] BIT signature found
nouveau [ VBIOS][0000:01:00.0] version 75.19.5e.00.06
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m2048@0xeb617000 port 0xeb617180 irq 27
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xeb617000 port 0xeb617300 irq 27
ata6: DUMMY
nouveau [ DEVINIT][0000:01:00.0] adaptor not initialised
nouveau [ VBIOS][0000:01:00.0] running init tables
usb 3-1: new high-speed USB device number 2 using ehci-pci
usb 4-1: new high-speed USB device number 2 using ehci-pci
nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
nouveau W[ PFB][0000:01:00.0][0x00000000][ffff8801289a4800] reclocking of this ram type unsupported
nouveau [ PFB][0000:01:00.0] RAM type: DDR3
nouveau [ PFB][0000:01:00.0] RAM size: 1024 MiB
nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
nouveau [ VOLT][0000:01:00.0] GPU voltage: 850000uv
nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
nouveau [ PTHERM][0000:01:00.0] fan management: automatic
nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
nouveau [ CLK][0000:01:00.0] 07: core 270 MHz memory 405 MHz
nouveau [ CLK][0000:01:00.0] 0f: core 475 MHz memory 900 MHz
nouveau [ CLK][0000:01:00.0] --: core 270 MHz memory 405 MHz
vga_switcheroo: enabled
[TTM] Zone kernel: Available graphics memory: 1944080 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 1024 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 02001300 00000000
nouveau [ DRM] DCB conn 01: 00000100
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau [ DRM] MM: using COPY0 for buffer copies
nouveau [ DRM] allocated 1024x768 fb: 0x60000, bo ffff88007f998000
usb 3-1: New USB device found, idVendor=8087, idProduct=0024
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 6 ports detected
usb 4-1: New USB device found, idVendor=8087, idProduct=0024
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 6 ports detected
usb 3-1.4: new full-speed USB device number 3 using ehci-pci
usb 4-1.6: new high-speed USB device number 3 using ehci-pci
usb 3-1.4: New USB device found, idVendor=0489, idProduct=e032
usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.4: Product: BCM20702A0
usb 3-1.4: Manufacturer: Broadcom Corp
usb 3-1.4: SerialNumber: 08EDB9A8AFE4
usb 4-1.6: New USB device found, idVendor=058f, idProduct=6366
usb 4-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-1.6: Product: Flash Card Reader/Writer
usb 4-1.6: Manufacturer: Generic
usb 4-1.6: SerialNumber: 058F63666435
usb-storage 4-1.6:1.0: USB Mass Storage device detected
scsi host6: usb-storage 4-1.6:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
usb 3-1.5: new high-speed USB device number 4 using ehci-pci
tsc: Refined TSC clocksource calibration: 2095.240 MHz
usb 3-1.5: New USB device found, idVendor=5986, idProduct=0294
usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.5: Product: Lenovo EasyCamera
usb 3-1.5: Manufacturer: Bison Corp.
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
nouveau 0000:01:00.0: fb1: nouveaufb frame buffer device
nouveau 0000:01:00.0: registered panic notifier
[drm] Initialized nouveau 1.2.1 20120801 for 0000:01:00.0 on minor 1
psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f03)
psmouse serio1: elantech: Synaptics capabilities query result 0x78, 0x17, 0x0b.
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR10001, max UDMA/100
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/100
scsi 1:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0001 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: [sda] 4096-byte physical blocks
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: MATSHITA DVD-RAM UJ8C1, 8.21, max UDMA/100
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8C1 8.21 PQ: 0 ANSI: 5
sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg1 type 5
scsi 6:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdb] Attached SCSI removable disk
sda: sda1 sda2 sda3 sda4
sd 1:0:0:0: [sda] Attached SCSI disk
Switched to clocksource tsc
random: nonblocking pool is initialized
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
alx 0000:04:00.0 eth0: NIC Up: 100 Mbps Full
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
squashfs: version 4.0 (2009/01/31) Phillip Lougher
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
nouveau E[ PBUS][0000:01:00.0] MMIO read of 0x00000000 FAULT at 0x002140 [ !ENGINE ]
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: [/lib/systemd/system/casper.service:10] Failed to parse input specifier, ignoring: force-tty
systemd[1]: Unit rofs.mount is bound to inactive unit dev-loop0.device. Stopping, too.
systemd[1]: Startup finished in 9.046s (kernel) + 406ms (userspace) = 9.452s.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Starting Remote File Systems (Pre).
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting User and Session Slice.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting system-getty.slice.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Nameserver information manager...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Started Braille Device Support.
systemd[1]: Starting Braille Device Support...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Mounting Debug File System...
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Read required files in advance...
systemd[1]: Mounted VMware vmblock fuse mount.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Starting Journal Audit Socket.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Starting udev Wait for Complete Device Initialization...
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Started Remount Root and Kernel File Systems.
systemd[1]: Started Nameserver information manager.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Started Rebuild Hardware Database.
systemd[1]: Starting Various fixups to make systemd work better on Debian...
systemd[1]: Started Various fixups to make systemd work better on Debian.
systemd[1]: Started Load/Save Random Seed.
systemd[1]: Started Create Static Device Nodes in /dev.
lp: driver loaded but no devices found
systemd[1]: Starting udev Kernel Device Manager...
ppdev: user-space parallel port driver
systemd[1]: Started Load Kernel Modules.
systemd[1]: Mounted Configuration File System.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Journal Service.
systemd-journald[418]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20141107/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258)
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20141107/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258)
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20141107/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258)
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20141107/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input8
bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
bcma: bus0: Bus registered
media: Linux media interface: v0.10
Linux video capture interface: v2.00
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
bluetooth hci0: Direct firmware load for brcm/BCM20702A0-0489-e032.hcd failed with error -2
Bluetooth: hci0: BCM: patch brcm/BCM20702A0-0489-e032.hcd not found
uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0294)
input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5:1.0/input/input9
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
cfg80211: Calling CRDA to update world regulatory domain
sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Internal Mic=0x19
sound hdaudioC0D0: Mic=0x18
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
b43: probe of bcma0:1 failed with error -524
Broadcom 43xx driver loaded [ Features: PNL ]
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
brcmsmac bcma0:1: mfg 4bf core 812 rev 24 class 0 irq 17
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: registered radio enabled led device: brcmsmac-phy0:radio gpio: 499
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: DFS Master region: FCC
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
cgroup: new mount options do not match the existing superblock, will be ignored
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
nouveau E[ PBUS][0000:01:00.0] MMIO read of 0x00000000 FAULT at 0x002140 [ !ENGINE ]